Will Deacon [Wed, 3 Feb 2016 18:00:58 +0000 (18:00 +0000)]
dt-bindings: arm, gic-v3: require that reserved cells are always 0
The arm,gic-v3 binding was written with good intentions and doesn't
enforce interrupt-cells to be 3, therefore making it easy to extend
the irq description in future if necessary:
> Cells 4 and beyond are reserved for future use.
Unfortunately, this sentence is immediately followed up with:
> When the 1st cell has a value of 0 or 1, cells 4 and beyond act as
> padding, and may be ignored. It is recommended that padding cells
> have a value of 0.
Consequently, any extensions to the PPI or SPI interrupt specifiers must
be able to work with random crap from legacy DTs, effectively
necessitating a new interrupt type in the first cell. Sigh.
This patch fixes the text so that additional, reserved cells are
required to be zero. This looks like a reasonable thing to require and
is already satisifed by the .dts files in-tree.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Robin Murphy [Tue, 9 Feb 2016 11:04:45 +0000 (11:04 +0000)]
of/irq: Fix msi-map calculation for nonzero rid-base
The existing msi-map code is fine for shifting the entire RID space
upwards, but attempting finer-grained remapping reveals a bug. It turns
out that we are mistakenly treating the msi-base part as an offset, not
as a new base to remap onto, so things get squiffy when rid-base is
nonzero. Fix this, and at the same time add a sanity check against
having msi-map-mask clash with a nonzero rid-base, as that's another
thing one can easily get wrong.
CC: <stable@vger.kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Sun, 7 Feb 2016 23:38:30 +0000 (15:38 -0800)]
Linux 4.5-rc3
Linus Torvalds [Sun, 7 Feb 2016 23:23:20 +0000 (15:23 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"The first real batch of fixes for this release cycle, so there are a
few more than usual.
Most of these are fixes and tweaks to board support (DT bugfixes,
etc). I've also picked up a couple of small cleanups that seemed
innocent enough that there was little reason to wait (const/
__initconst and Kconfig deps).
Quite a bit of the changes on OMAP were due to fixes to no longer
write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but
there were also other fixes.
Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC
fixes on OMAP5, and Nomadik had changes to MMC parameters in DT.
All in all, mostly the usual mix of various fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
ARM: multi_v7_defconfig: enable DW_WATCHDOG
ARM: nomadik: fix up SD/MMC DT settings
ARM64: tegra: Add chosen node for tegra132 norrin
ARM: realview: use "depends on" instead of "if" after prompt
ARM: tango: use "depends on" instead of "if" after prompt
ARM: tango: use const and __initconst for smp_operations
ARM: realview: use const and __initconst for smp_operations
bus: uniphier-system-bus: revive tristate prompt
arm64: dts: Add missing DMA Abort interrupt to Juno
bus: vexpress-config: Add missing of_node_put
ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
ARM: dts: am4372: fix irq type for arm twd and global timer
ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
...
Linus Torvalds [Sun, 7 Feb 2016 23:17:47 +0000 (15:17 -0800)]
Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox fixes from Jassi Brar:
- fix getting element from the pcc-channels array by simply indexing
into it
- prevent building mailbox-test driver for archs that don't have IOMEM
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Fix dependencies for !HAS_IOMEM archs
mailbox: pcc: fix channel calculation in get_pcc_channel()
Linus Torvalds [Sun, 7 Feb 2016 06:14:46 +0000 (22:14 -0800)]
Merge tag 'usb-4.5-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 4.5-rc3.
The usual, xhci fixes for reported issues, combined with some small
gadget driver fixes, and a MAINTAINERS file update. All have been in
linux-next with no reported issues"
* tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: harden xhci_find_next_ext_cap against device removal
xhci: Fix list corruption in urb dequeue at host removal
usb: host: xhci-plat: fix NULL pointer in probe for device tree case
usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling
usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
usb: xhci: set SSIC port unused only if xhci_suspend succeeds
usb: xhci: add a quirk bit for ssic port unused
usb: xhci: handle both SSIC ports in PME stuck quirk
usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.
Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
MAINTAINERS: fix my email address
usb: dwc2: Fix probe problem on bcm2835
Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"
usb: musb: ux500: Fix NULL pointer dereference at system PM
usb: phy: mxs: declare variable with initialized value
usb: phy: msm: fix error handling in probe.
Linus Torvalds [Sun, 7 Feb 2016 06:13:16 +0000 (22:13 -0800)]
Merge tag 'staging-4.5-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some IIO and staging driver fixes for 4.5-rc3.
All of them, except one, are for IIO drivers, and one is for a speakup
driver fix caused by some earlier patches, to resolve a reported build
failure"
* tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: speakup: Fix allyesconfig build on mn10300
iio: dht11: Use boottime
iio:
ade7753: avoid uninitialized data
iio: pressure: mpl115: fix temperature offset sign
iio: imu: Fix dependencies for !HAS_IOMEM archs
staging: iio: Fix dependencies for !HAS_IOMEM archs
iio: adc: Fix dependencies for !HAS_IOMEM archs
iio: inkern: fix a NULL dereference on error
iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
iio: light: acpi-als: Report data as processed
iio: dac: mcp4725: set iio name property in sysfs
iio: add HAS_IOMEM dependency to VF610_ADC
iio: add IIO_TRIGGER dependency to STK8BA50
iio: proximity: lidar: correct return value
iio-light: Use a signed return type for ltr501_match_samp_freq()
Linus Torvalds [Sat, 6 Feb 2016 04:20:07 +0000 (20:20 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
radix-tree: fix oops after radix_tree_iter_retry
MAINTAINERS: trim the file triggers for ABI/API
dax: dirty inode only if required
thp: make deferred_split_scan() work again
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
um: asm/page.h: remove the pte_high member from struct pte_t
mm, hugetlb: don't require CMA for runtime gigantic pages
mm/hugetlb: fix gigantic page initialization/allocation
mm: downgrade VM_BUG in isolate_lru_page() to warning
mempolicy: do not try to queue pages from !vma_migratable()
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
vmstat: make vmstat_update deferrable
mm, vmstat: make quiet_vmstat lighter
mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
memblock: don't mark memblock_phys_mem_size() as __init
dump_stack: avoid potential deadlocks
mm: validate_mm browse_rb SMP race condition
m32r: fix build failure due to SMP and MMU
...
Linus Torvalds [Sat, 6 Feb 2016 03:52:57 +0000 (19:52 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"We have a few wire protocol compatibility fixes, ports of a few recent
CRUSH mapping changes, and a couple error path fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: MOSDOpReply v7 encoding
libceph: advertise support for TUNABLES5
crush: decode and initialize chooseleaf_stable
crush: add chooseleaf_stable tunable
crush: ensure take bucket value is valid
crush: ensure bucket id is valid before indexing buckets array
ceph: fix snap context leak in error path
ceph: checking for IS_ERR instead of NULL
Linus Torvalds [Sat, 6 Feb 2016 03:38:15 +0000 (19:38 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Fixes all over the place:
- amdkfd: two static checker fixes
- mst: a bunch of static checker and spec/hw interaction fixes
- amdgpu: fix Iceland hw properly, and some fiji bugs, along with
some write-combining fixes.
- exynos: some regression fixes
- adv7511: fix some EDID reading issues"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits)
drm/dp/mst: deallocate payload on port destruction
drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
drm/dp/mst: move GUID storage from mgr, port to only mst branch
drm/dp/mst: change MST detection scheme
drm/dp/mst: Calculate MST PBN with 31.32 fixed point
drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
drm/mst: Add range check for max_payloads during init
drm/mst: Don't ignore the MST PBN self-test result
drm: fix missing reference counting decrease
drm/amdgpu: disable uvd and vce clockgating on Fiji
drm/amdgpu: remove exp hardware support from iceland
drm/amdgpu: load MEC ucode manually on iceland
drm/amdgpu: don't load MEC2 on topaz
drm/amdgpu: drop topaz support from gmc8 module
drm/amdgpu: pull topaz gmc bits into gmc_v7
drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
drm/amdgpu: iceland use CI based MC IP
drm/amdgpu: move gmc7 support out of CIK dependency
drm/amdgpu/gfx7: enable cp inst/reg error interrupts
drm/amdgpu/gfx8: enable cp inst/reg error interrupts
...
Linus Torvalds [Sat, 6 Feb 2016 02:11:23 +0000 (18:11 -0800)]
Merge tag 'pm+acpi-4.5-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are: a fix for a recently introduced false-positive warnings
about PM domain pointers being changed inappropriately (harmless but
annoying), an MCH size workaround quirk for one more platform, a
compiler warning fix (generic power domains framework), an ACPI LPSS
(Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code.
Specifics:
- PM core fix to avoid false-positive warnings generated when the
pm_domain field is cleared for a device that appears to be bound to
a driver (Rafael Wysocki).
- New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer).
- Fix for an "unused function" compiler warning in the generic power
domains framework (Ulf Hansson).
- Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM
domain pointer of a device properly in one place that was
overlooked by a recent PM core update (Andy Shevchenko).
- Removal of a redundant function declaration in the ACPI CPPC core
code (Timur Tabi)"
* tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: Avoid false-positive warnings in dev_pm_domain_set()
PM / Domains: Silence compiler warning for an unused function
ACPI / CPPC: remove redundant mbox_send_message() declaration
ACPI / LPSS: set PM domain via helper setter
PNP: Add Haswell-ULT to Intel MCH size workaround
Jason Baron [Fri, 5 Feb 2016 23:37:04 +0000 (15:37 -0800)]
epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
In the current implementation of the EPOLLEXCLUSIVE flag (added for
4.5-rc1), if epoll waiters create different POLL* sets and register them
as exclusive against the same target fd, the current implementation will
stop waking any further waiters once it finds the first idle waiter.
This means that waiters could miss wakeups in certain cases.
For example, when we wake up a pipe for reading we do:
wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if
one epoll set or epfd is added to pipe p with POLLIN and a second set
epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the
wakeup since the current implementation will stop after it finds any
intersection of events with a waiter that is blocked in epoll_wait().
We could potentially address this by requiring all epoll waiters that
are added to p be required to pass the same set of POLL* events. IE the
first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL*
flags to be used by any other epfds that are added as EPOLLEXCLUSIVE.
However, I think it might be somewhat confusing interface as we would
have to reference count the number of users for that set, and so
userspace would have to keep track of that count, or we would need a
more involved interface. It also adds some shared state that we'd have
store somewhere. I don't think anybody will want to bloat
__wait_queue_head for this.
I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE
such that it can only be specified with EPOLLIN and/or EPOLLOUT. So
that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop
once we hit the first idle waiter that specifies the EPOLLIN bit, since
any remaining waiters that only have 'POLLOUT' set wouldn't need to be
woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup
bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the
wake bit set (there is at least one example of this I saw in fs/pipe.c),
then we just wake the entire exclusive list. Having both 'POLLOUT' and
'POLLIN' both set should not be on any performance critical path, so I
think that's ok (in fs/pipe.c its in pipe_release()). We also continue
to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus,
the user can specify EPOLLERR and/or EPOLLHUP but is not required to do
so.
Since epoll waiters may be interested in other events as well besides
EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by
doing a 'dup' call on the target fd and adding that as one normally
would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT
events are what we are interest in balancing, I think that the 'dup'
thing could perhaps be added to only one of the waiter threads.
However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be
sufficient for the majority of use-cases.
Since EPOLLEXCLUSIVE is intended to be used with a target fd shared
among multiple epfds, where between 1 and n of the epfds may receive an
event, it does not satisfy the semantics of EPOLLONESHOT where only 1
epfd would get an event. Thus, it is not allowed to be specified in
conjunction with EPOLLEXCLUSIVE.
EPOLL_CTL_MOD is also not allowed if the fd was previously added as
EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as
interesting, but this could be relaxed at some further point.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Madars Vitolins <m@silodev.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov [Fri, 5 Feb 2016 23:37:01 +0000 (15:37 -0800)]
radix-tree: fix oops after radix_tree_iter_retry
Helper radix_tree_iter_retry() resets next_index to the current index.
In following radix_tree_next_slot current chunk size becomes zero. This
isn't checked and it tries to dereference null pointer in slot.
Tagged iterator is fine because retry happens only at slot 0 where tag
bitmask in iter->tags is filled with single bit.
Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup")
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Kerrisk (man-pages) [Fri, 5 Feb 2016 23:36:58 +0000 (15:36 -0800)]
MAINTAINERS: trim the file triggers for ABI/API
Commit
ea8f8fc8631 ("MAINTAINERS: add linux-api for review of API/ABI
changes") added file triggers for various paths that likely indicated
API/ABI changes. However, catching all changes in Documentation/ABI/
and include/uapi/ produces a large volume of mail to linux-api, rather
than only API/ABI changes. Drop those two entries, but leave
include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related
changes.
[josh@joshtriplett.org: redid changelog]
Signed-off-by: Michael Kerrisk <mtk.man-pages@gmail.com>
Acked-by: Shuah khan <shuahkh@osg.samsung.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Monakhov [Fri, 5 Feb 2016 23:36:55 +0000 (15:36 -0800)]
dax: dirty inode only if required
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:53 +0000 (15:36 -0800)]
thp: make deferred_split_scan() work again
We need to iterate over split_queue, not local empty list to get
anything split from the shrinker.
Fixes: e3ae19535c66 ("thp: limit number of object to scan on deferred_split_scan()")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov [Fri, 5 Feb 2016 23:36:50 +0000 (15:36 -0800)]
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if
anon_vma appeared between lock and unlock. We have to check anon_vma
first or call anon_vma_prepare() to be sure that it's here. There are
only few users of these legacy helpers. Let's get rid of them.
This patch fixes anon_vma lock imbalance in validate_mm(). Write lock
isn't required here, read lock is enough.
And reorders expand_downwards/expand_upwards: security_mmap_addr() and
wrapping-around check don't have to be under anon vma lock.
Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.com
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xuejiufei [Fri, 5 Feb 2016 23:36:47 +0000 (15:36 -0800)]
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
When recovery master down, dlm_do_local_recovery_cleanup() only remove
the $RECOVERY lock owned by dead node, but do not clear the refmap bit.
Which will make umount thread falling in dead loop migrating $RECOVERY
to the dead node.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolai Stange [Fri, 5 Feb 2016 23:36:44 +0000 (15:36 -0800)]
um: asm/page.h: remove the pte_high member from struct pte_t
Commit
16da306849d0 ("um: kill pfn_t") introduced a compile warning for
defconfig (SUBARCH=i386):
arch/um/kernel/skas/mmu.c:38:206:
warning: right shift count >= width of type [-Wshift-count-overflow]
Aforementioned patch changes the definition of the phys_to_pfn() macro
from
((pfn_t) ((p) >> PAGE_SHIFT))
to
((p) >> PAGE_SHIFT)
This effectively changes the phys_to_pfn() expansion's type from
unsigned long long to unsigned long.
Through the callchain init_stub_pte() => mk_pte(), the expansion of
phys_to_pfn() is (indirectly) fed into the 'phys' argument of the
pte_set_val(pte, phys, prot) macro, eventually leading to
(pte).pte_high = (phys) >> 32;
This results in the warning from above.
Since UML only deals with 32 bit addresses, the upper 32 bits from
'phys' used to be always zero anyway. Also, all page protection flags
defined by UML don't use any bits beyond bit 9. Since the contents of a
PTE are defined within architecture scope only, the ->pte_high member
can be safely removed.
Remove the ->pte_high member from struct pte_t.
Rename ->pte_low to ->pte.
Adapt the pte helper macros in arch/um/include/asm/page.h.
Noteworthy is the pte_copy() macro where a smp_wmb() gets dropped. This
write barrier doesn't seem to be paired with any read barrier though and
thus, was useless anyway.
Fixes: 16da306849d0 ("um: kill pfn_t")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Fri, 5 Feb 2016 23:36:41 +0000 (15:36 -0800)]
mm, hugetlb: don't require CMA for runtime gigantic pages
Commit
944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the runtime gigantic page allocation via
alloc_contig_range(), making this support available only when CONFIG_CMA
is enabled. Because it doesn't depend on MIGRATE_CMA pageblocks and the
associated infrastructure, it is possible with few simple adjustments to
require only CONFIG_MEMORY_ISOLATION instead of full CONFIG_CMA.
After this patch, alloc_contig_range() and related functions are
available and used for gigantic pages with just CONFIG_MEMORY_ISOLATION
enabled. Note CONFIG_CMA selects CONFIG_MEMORY_ISOLATION. This allows
supporting runtime gigantic pages without the CMA-specific checks in
page allocator fastpaths.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Fri, 5 Feb 2016 23:36:38 +0000 (15:36 -0800)]
mm/hugetlb: fix gigantic page initialization/allocation
Attempting to preallocate 1G gigantic huge pages at boot time with
"hugepagesz=1G hugepages=1" on the kernel command line will prevent
booting with the following:
kernel BUG at mm/hugetlb.c:1218!
When mapcount accounting was reworked, the setting of
compound_mapcount_ptr in prep_compound_gigantic_page was overlooked. As
a result, the validation of mapcount in free_huge_page fails.
The "BUG_ON" checks in free_huge_page were also changed to
"VM_BUG_ON_PAGE" to assist with debugging.
Fixes: 53f9263baba69 ("mm: rework mapcount accounting to enable 4k mapping of THPs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:36 +0000 (15:36 -0800)]
mm: downgrade VM_BUG in isolate_lru_page() to warning
Calling isolate_lru_page() is wrong and shouldn't happen, but it not
nessesary fatal: the page just will not be isolated if it's not on LRU.
Let's downgrade the VM_BUG_ON_PAGE() to WARN_RATELIMIT().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:33 +0000 (15:36 -0800)]
mempolicy: do not try to queue pages from !vma_migratable()
Maybe I miss some point, but I don't see a reason why we try to queue
pages from non migratable VMAs.
This testcase steps on VM_BUG_ON_PAGE() in isolate_lru_page():
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <sys/mman.h>
#include <numaif.h>
#define SIZE 0x2000
int foo;
int main()
{
int fd;
char *p;
unsigned long mask = 2;
fd = open("/dev/sg0", O_RDWR);
p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
/* Faultin pages */
foo = p[0] + p[0x1000];
mbind(p, SIZE, MPOL_BIND, &mask, 4, MPOL_MF_MOVE | MPOL_MF_STRICT);
return 0;
}
The only case when we can queue pages from such VMA is MPOL_MF_STRICT
plus MPOL_MF_MOVE or MPOL_MF_MOVE_ALL for VMA which has pages on LRU,
but gfp mask is not sutable for migaration (see mapping_gfp_mask() check
in vma_migratable()). That's looks like a bug to me.
Let's filter out non-migratable vma at start of queue_pages_test_walk()
and go to queue_pages_pte_range() only if MPOL_MF_MOVE or
MPOL_MF_MOVE_ALL flag is set.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Fri, 5 Feb 2016 23:36:30 +0000 (15:36 -0800)]
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
Jan Stancek has reported that system occasionally hanging after "oom01"
testcase from LTP triggers OOM. Guessing from a result that there is a
kworker thread doing memory allocation and the values between "Node 0
Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not
up-to-date for some reason.
According to commit
373ccbe59270 ("mm, vmstat: allow WQ concurrency to
discover memory reclaim doesn't make any progress"), it meant to force
the kworker thread to take a short sleep, but it by error used
schedule_timeout(1). We missed that schedule_timeout() in state
TASK_RUNNING doesn't do anything.
Fix it by using schedule_timeout_uninterruptible(1) which forces the
kworker thread to take a short sleep in order to make sure that vmstat
is up-to-date.
Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Cristopher Lameter <clameter@sgi.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 5 Feb 2016 23:36:27 +0000 (15:36 -0800)]
vmstat: make vmstat_update deferrable
Commit
0eb77e988032 ("vmstat: make vmstat_updater deferrable again and
shut down on idle") made vmstat_shepherd deferrable. vmstat_update
itself is still useing standard timer which might interrupt idle task.
This is possible because "mm, vmstat: make quiet_vmstat lighter" removed
cancel_delayed_work from the quiet_vmstat.
Change vmstat_work to use DEFERRABLE_WORK to prevent from pointless
wakeups from the idle context.
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 5 Feb 2016 23:36:24 +0000 (15:36 -0800)]
mm, vmstat: make quiet_vmstat lighter
Mike has reported a considerable overhead of refresh_cpu_vm_stats from
the idle entry during pipe test:
12.89% [kernel] [k] refresh_cpu_vm_stats.isra.12
4.75% [kernel] [k] __schedule
4.70% [kernel] [k] mutex_unlock
3.14% [kernel] [k] __switch_to
This is caused by commit
0eb77e988032 ("vmstat: make vmstat_updater
deferrable again and shut down on idle") which has placed quiet_vmstat
into cpu_idle_loop. The main reason here seems to be that the idle
entry has to get over all zones and perform atomic operations for each
vmstat entry even though there might be no per cpu diffs. This is a
pointless overhead for _each_ idle entry.
Make sure that quiet_vmstat is as light as possible.
First of all it doesn't make any sense to do any local sync if the
current cpu is already set in oncpu_stat_off because vmstat_update puts
itself there only if there is nothing to do.
Then we can check need_update which should be a cheap way to check for
potential per-cpu diffs and only then do refresh_cpu_vm_stats.
The original patch also did cancel_delayed_work which we are not doing
here. There are two reasons for that. Firstly cancel_delayed_work from
idle context will blow up on RT kernels (reported by Mike):
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.5.0-rt3 #7
Hardware name: MEDION MS-7848/MS-7848, BIOS M7848W08.20C 09/23/2013
Call Trace:
dump_stack+0x49/0x67
___might_sleep+0xf5/0x180
rt_spin_lock+0x20/0x50
try_to_grab_pending+0x69/0x240
cancel_delayed_work+0x26/0xe0
quiet_vmstat+0x75/0xa0
cpu_idle_loop+0x38/0x3e0
cpu_startup_entry+0x13/0x20
start_secondary+0x114/0x140
And secondly, even on !RT kernels it might add some non trivial overhead
which is not necessary. Even if the vmstat worker wakes up and preempts
idle then it will be most likely a single shot noop because the stats
were already synced and so it would end up on the oncpu_stat_off anyway.
We just need to teach both vmstat_shepherd and vmstat_update to stop
scheduling the worker if there is nothing to do.
[mgalbraith@suse.de: cancel pending work of the cpu_stat_off CPU]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Fri, 5 Feb 2016 23:36:21 +0000 (15:36 -0800)]
mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
The description mentions kswapd threads, while the deferred struct page
initialization is actually done by one-off "pgdatinitX" threads.
Fix the description so that potentially users are not confused about
pgdatinit threads using CPU after boot instead of kswapd.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Gibson [Fri, 5 Feb 2016 23:36:19 +0000 (15:36 -0800)]
memblock: don't mark memblock_phys_mem_size() as __init
At the moment memblock_phys_mem_size() is marked as __init, and so is
discarded after boot. This is different from most of the memblock
functions which are marked __init_memblock, and are only discarded after
boot if memory hotplug is not configured.
To allow for upcoming code which will need memblock_phys_mem_size() in
the hotplug path, change it from __init to __init_memblock.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Fri, 5 Feb 2016 23:36:16 +0000 (15:36 -0800)]
dump_stack: avoid potential deadlocks
Some servers experienced fatal deadlocks because of a combination of
bugs, leading to multiple cpus calling dump_stack().
The checksumming bug was fixed in commit
34ae6a1aa054 ("ipv6: update
skb->csum when CE mark is propagated").
The second problem is a faulty locking in dump_stack()
CPU1 runs in process context and calls dump_stack(), grabs dump_lock.
CPU2 receives a TCP packet under softirq, grabs socket spinlock, and
call dump_stack() from netdev_rx_csum_fault().
dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since
dump_lock is owned by CPU1
While dumping its stack, CPU1 is interrupted by a softirq, and happens
to process a packet for the TCP socket locked by CPU2.
CPU1 spins forever in spin_lock() : deadlock
Stack trace on CPU1 looked like :
NMI backtrace for cpu 1
RIP: _raw_spin_lock+0x25/0x30
...
Call Trace:
<IRQ>
tcp_v6_rcv+0x243/0x620
ip6_input_finish+0x11f/0x330
ip6_input+0x38/0x40
ip6_rcv_finish+0x3c/0x90
ipv6_rcv+0x2a9/0x500
process_backlog+0x461/0xaa0
net_rx_action+0x147/0x430
__do_softirq+0x167/0x2d0
call_softirq+0x1c/0x30
do_softirq+0x3f/0x80
irq_exit+0x6e/0xc0
smp_call_function_single_interrupt+0x35/0x40
call_function_single_interrupt+0x6a/0x70
<EOI>
printk+0x4d/0x4f
printk_address+0x31/0x33
print_trace_address+0x33/0x3c
print_context_stack+0x7f/0x119
dump_trace+0x26b/0x28e
show_trace_log_lvl+0x4f/0x5c
show_stack_log_lvl+0x104/0x113
show_stack+0x42/0x44
dump_stack+0x46/0x58
netdev_rx_csum_fault+0x38/0x3c
__skb_checksum_complete_head+0x6e/0x80
__skb_checksum_complete+0x11/0x20
tcp_rcv_established+0x2bd5/0x2fd0
tcp_v6_do_rcv+0x13c/0x620
sk_backlog_rcv+0x15/0x30
release_sock+0xd2/0x150
tcp_recvmsg+0x1c1/0xfc0
inet_recvmsg+0x7d/0x90
sock_recvmsg+0xaf/0xe0
___sys_recvmsg+0x111/0x3b0
SyS_recvmsg+0x5c/0xb0
system_call_fastpath+0x16/0x1b
Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Fri, 5 Feb 2016 23:36:13 +0000 (15:36 -0800)]
mm: validate_mm browse_rb SMP race condition
The mmap_sem for reading in validate_mm called from expand_stack is not
enough to prevent the argumented rbtree rb_subtree_gap information to
change from under us because expand_stack may be running from other
threads concurrently which will hold the mmap_sem for reading too.
The argumented rbtree is updated with vma_gap_update under the
page_table_lock so use it in browse_rb() too to avoid false positives.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudip Mukherjee [Fri, 5 Feb 2016 23:36:10 +0000 (15:36 -0800)]
m32r: fix build failure due to SMP and MMU
One of the randconfig build failed with the error:
arch/m32r/kernel/smp.c: In function 'smp_flush_tlb_mm':
arch/m32r/kernel/smp.c:283:20: error: subscripted value is neither array nor pointer nor vector
mmc = &mm->context[cpu_id];
^
arch/m32r/kernel/smp.c: In function 'smp_flush_tlb_page':
arch/m32r/kernel/smp.c:353:20: error: subscripted value is neither array nor pointer nor vector
mmc = &mm->context[cpu_id];
^
arch/m32r/kernel/smp.c: In function 'smp_invalidate_interrupt':
arch/m32r/kernel/smp.c:479:41: error: subscripted value is neither array nor pointer nor vector
unsigned long *mmc = &flush_mm->context[cpu_id];
It turned out that CONFIG_SMP was defined but CONFIG_MMU was not
defined. But arch/m32r/include/asm/mmu.h only defines mm_context_t as
an array when both CONFIG_SMP and CONFIG_MMU are defined. And
arch/m32r/kernel/smp.c is always using context as an array. So without
MMU SMP can not work.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ross Zwisler [Fri, 5 Feb 2016 23:36:08 +0000 (15:36 -0800)]
block: fix pfn_mkwrite() DAX fault handler
Previously the pfn_mkwrite() fault handler for raw block devices called
bldev_dax_fault() -> __dax_fault() to do a full DAX page fault.
Really what the pfn_mkwrite() fault handler needs to do is call
dax_pfn_mkwrite() to make sure that the radix tree entry for the given
PTE is marked as dirty so that a follow-up fsync or msync call will
flush it durably to media.
Fixes: 5a023cdba50c ("block: enable dax for raw block devices")
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sasha Levin [Fri, 5 Feb 2016 23:36:05 +0000 (15:36 -0800)]
signals: avoid random wakeups in sigsuspend()
A random wakeup can get us out of sigsuspend() without TIF_SIGPENDING
being set.
Avoid that by making sure we were signaled, like sys_pause() does.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Fri, 5 Feb 2016 23:34:01 +0000 (00:34 +0100)]
Merge branches 'pm-core' and 'pm-domains'
* pm-core:
PM: Avoid false-positive warnings in dev_pm_domain_set()
ACPI / LPSS: set PM domain via helper setter
* pm-domains:
PM / Domains: Silence compiler warning for an unused function
Rafael J. Wysocki [Fri, 5 Feb 2016 23:33:52 +0000 (00:33 +0100)]
Merge branches 'pnp' and 'acpi-cppc'
* pnp:
PNP: Add Haswell-ULT to Intel MCH size workaround
* acpi-cppc:
ACPI / CPPC: remove redundant mbox_send_message() declaration
Linus Torvalds [Fri, 5 Feb 2016 20:46:38 +0000 (12:46 -0800)]
Merge tag 'media/v4.5-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- vb2: fix a vb2_thread regression and DVB read() breakages
- vsp1: fix compilation and links creation
- s5k6a3: Fix VIDIOC_SUBDEV_G_FMT ioctl for TRY format
- exynos4-is: fix a build issue, format negotiation and sensor detection
- Fix a regression with pvrusb2 and ir-kbd-i2c
- atmel-isi: fix debug message which only show the first format
- tda1004x: fix a tuning bug if G_PROPERTY is called too early
- saa7134-alsa: fix a bug at device unbinding/driver removal
- Fix build of one driver if !HAS_DMA
- soc_camera: cleanup control device on async_unbind
* tag 'media/v4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] saa7134-alsa: Only frees registered sound cards
[media] vb2-core: call threadio->fnc() if !VB2_BUF_STATE_ERROR
[media] vb2: fix nasty vb2_thread regression
[media] tda1004x: only update the frontend properties if locked
[media] media: i2c: Don't export ir-kbd-i2c module alias
[media] exynos4-is: make VIDEO_SAMSUNG_EXYNOS4_IS tristate
[media] media: Kconfig: add dependency of HAS_DMA
[media] exynos4-is: Wait for 100us before opening sensor
[media] exynos4-is: Open shouldn't fail when sensor entity is not linked
[media] s5k6a3: Fix VIDIOC_SUBDEV_G_FMT ioctl for TRY format
[media] exynos4-is: fix a format string bug
[media] drivers/media: vsp1_video: fix compile error
[media] atmel-isi: fix debug message which only show the first format
[media] soc_camera: cleanup control device on async_unbind
[media] v4l: vsp1: Fix wrong entities links creation
Linus Torvalds [Fri, 5 Feb 2016 20:34:44 +0000 (12:34 -0800)]
Merge tag 'sound-4.5-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This was a busy week and I had to prepare a pile of duct tapes for the
bugs reported by syzkaller fuzzer in wide range of ALSA core APIs:
timer, rawmidi, sequencer, and PCM OSS emulation. Let's see how many
other holes we need to plug.
Besides that, a few usual boring stuff, HD- and USB-audio quirks, have
been added"
* tag 'sound-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix leftover link at closing
ALSA: seq: Fix lockdep warnings due to double mutex locks
ALSA: rawmidi: Fix race at copying & updating the position
ALSA: rawmidi: Make snd_rawmidi_transmit() race-free
ALSA: hda - Add fixup for Mac Mini 7,1 model
ALSA: hda/realtek - Support headset mode for ALC225
ALSA: hda/realtek - Support Dell headset mode for ALC225
ALSA: hda/realtek - New codec support of ALC225
ALSA: timer: Sync timer deletion at closing the system timer
ALSA: timer: Fix link corruption due to double start or stop
ALSA: seq: Fix yet another races among ALSA timer accesses
ALSA: pcm: Fix potential deadlock in OSS emulation
ALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer check
ALSA: seq: Fix race at closing in virmidi driver
ALSA: emu10k1: correctly handling failed thread creation
ALSA: usb-audio: Add quirk for Microsoft LifeCam HD-6000
ALSA: usb-audio: Add native DSD support for PS Audio NuWave DAC
ALSA: usb-audio: Fix OPPO HA-1 vendor ID
Linus Torvalds [Fri, 5 Feb 2016 19:20:15 +0000 (11:20 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
"This fixes several Kconfig dependencies, a compilation warning in
pcwd_usb, a failure to abort the sp805 wdt after a ping and the
max63xx wdt's MODULE_LICENSE"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: Fix dependencies for !HAS_IOMEM archs
watchdog: imgdpc: select WATCHDOG_CORE
watchdog: tango: rename ARCH_TANGOX to ARCH_TANGO
watchdog: pcwd_usb: fix compilation warning
watchdog: sp805: ping fails to abort wdt reset
watchdog: max63xx: make module's license marker match the header
Dave Airlie [Fri, 5 Feb 2016 05:24:17 +0000 (15:24 +1000)]
Merge branch 'drm-fixes-mst' of git://people.freedesktop.org/~airlied/linux into drm-fixes
displayport multistream fixes from AMD.
* 'drm-fixes-mst' of git://people.freedesktop.org/~airlied/linux:
drm/dp/mst: deallocate payload on port destruction
drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
drm/dp/mst: move GUID storage from mgr, port to only mst branch
drm/dp/mst: change MST detection scheme
drm/dp/mst: Calculate MST PBN with 31.32 fixed point
drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
drm/mst: Add range check for max_payloads during init
drm/mst: Don't ignore the MST PBN self-test result
drm: fix missing reference counting decrease
Mykola Lysenko [Wed, 27 Jan 2016 14:39:36 +0000 (09:39 -0500)]
drm/dp/mst: deallocate payload on port destruction
This is needed to properly deallocate port payload
after downstream branch get unplugged.
In order to do this unplugged MST topology should
be preserved, to find first alive port on path to
unplugged MST topology, and send payload deallocation
request to branch device of found port.
For this mstb and port kref's are used in reversed
order to track when port and branch memory could be
freed.
Added additional functions to find appropriate mstb
as described above.
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Andrey Grodzovsky [Fri, 22 Jan 2016 22:07:29 +0000 (17:07 -0500)]
drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
On DELL U3014 if you clear the table before enabling MST it sometimes
hangs the receiver.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Hersen Wu [Fri, 22 Jan 2016 22:07:28 +0000 (17:07 -0500)]
drm/dp/mst: move GUID storage from mgr, port to only mst branch
Previous implementation does not handle case below: boot up one MST branch
to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output
of 1st MST, GUID is not created for 2nd MST branch. When downstream port of
2nd MST branch send upstream request, it fails because 2nd MST branch GUID
is not available.
New Implementation: only create GUID for MST branch and save it within Branch.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mykola Lysenko [Fri, 22 Jan 2016 22:07:27 +0000 (17:07 -0500)]
drm/dp/mst: change MST detection scheme
1. Get edid for all connected MST displays, not only on logical ports,
in the same thread as MST topology detection is done:
There are displays that have branches inside w/o logical ports.
So in case another SST display connected downstream system can
end-up in situation when 3 DOWN requests sent: two for
‘remote i2c read’ and one for ‘enum path resources’, making slots full.
2. Call notification callback in one place in the end of topology discovery/update:
This is done to reduce number of events sent to userspace in case complex
topology discovery is going, adding multiple number of connectors;
3. Remove notification callback call from short pulse interrupt processing function:
This is done in order not to block interrupt processing function, in case any
MST request will be made from it. Notification will be send from topology
discovery/update work item.
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Harry Wentland [Fri, 22 Jan 2016 22:07:26 +0000 (17:07 -0500)]
drm/dp/mst: Calculate MST PBN with 31.32 fixed point
Our PBN value overflows the 20 bits integer part of the 20.12
fixed point. We need to use 31.32 fixed point to avoid this.
This happens with display clocks larger than 293122 (at 24 bpp),
which we see with the Sharp (and similar) 4k tiled displays.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Harry Wentland [Fri, 22 Jan 2016 22:07:25 +0000 (17:07 -0500)]
drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
drm_fixp_from_fraction allows us to create a fixed point directly
from a fraction, rather than creating fixed point values and dividing
later. This avoids overflow of our 64 bit value for large numbers.
drm_fixp2int_ceil allows us to return the ceiling of our fixed point
value.
[airlied: squash Jordan's fix]
32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Imre Deak [Fri, 29 Jan 2016 12:44:29 +0000 (14:44 +0200)]
drm/mst: Add range check for max_payloads during init
max_payload is limited by the space we have in
drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track
max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id().
Add a sanity check for this.
Caught by coverity.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Imre Deak [Fri, 29 Jan 2016 12:44:28 +0000 (14:44 +0200)]
drm/mst: Don't ignore the MST PBN self-test result
Otherwise this call would have no effect.
Caught by Coverity.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Insu Yun [Mon, 1 Feb 2016 16:08:29 +0000 (11:08 -0500)]
drm: fix missing reference counting decrease
In drm_dp_mst_allocate_vcpi, it returns true in two paths,
but in one path, there is no reference couting decrease.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 5 Feb 2016 04:48:36 +0000 (14:48 +1000)]
Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- fix and enable iceland/topaz support
- handle WC on platforms that don't support it
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: disable uvd and vce clockgating on Fiji
drm/amdgpu: remove exp hardware support from iceland
drm/amdgpu: load MEC ucode manually on iceland
drm/amdgpu: don't load MEC2 on topaz
drm/amdgpu: drop topaz support from gmc8 module
drm/amdgpu: pull topaz gmc bits into gmc_v7
drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
drm/amdgpu: iceland use CI based MC IP
drm/amdgpu: move gmc7 support out of CIK dependency
drm/amdgpu/gfx7: enable cp inst/reg error interrupts
drm/amdgpu/gfx8: enable cp inst/reg error interrupts
drm/amdgpu: mask out WC from BO on unsupported arches
drm/radeon: mask out WC from BO on unsupported arches
drm: add helper to check for wc memory support
drm/amdgpu: no need to load MC firmware on fiji
Dave Airlie [Fri, 5 Feb 2016 04:47:24 +0000 (14:47 +1000)]
Merge tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
two static checker fixes.
* tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Remove unnecessary cast in kfree
drm/amdgpu: fix non-ANSI declaration of amdgpu_amdkfd_gfx_*_get_functions()
Dave Airlie [Fri, 5 Feb 2016 04:45:44 +0000 (14:45 +1000)]
Merge branch 'exynos-drm-fixes' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
Just regression fixes.
- Fix build warning and error without PM configuration
- Fix no display issue on Snow board reported by Michal Suchanek,
http://www.spinics.net/lists/dri-devel/msg99473.html
* 'exynos-drm-fixes' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: dp: Fix panel and bridge lookup logic
drm: exynos: make PM functions as __maybe_unused
drm/exynos: fix building without CONFIG_PM_SLEEP
Dave Airlie [Fri, 5 Feb 2016 04:44:16 +0000 (14:44 +1000)]
Merge branch 'drm/adv7511' of git://git./linux/kernel/git/wsa/linux into drm-fixes
misc adv7511 edid reading fixes.
* 'drm/adv7511' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
drm: adv7511: it's HPD, not HDP
drm: adv7511: mark ADV7511_REG_EDID_READ_CTRL volatile
drm: adv7511: really enable interrupts for EDID detection
Dave Airlie [Fri, 5 Feb 2016 04:43:35 +0000 (14:43 +1000)]
Merge tag 'drm-intel-fixes-2016-02-04' of git://anongit.freedesktop.org/drm-intel into drm-fixes
misc i915 fixes.
* tag 'drm-intel-fixes-2016-02-04' of git://anongit.freedesktop.org/drm-intel:
drm/i915: refine qemu south bridge detection
drm/i915: Remove select to deleted STOP_MACHINE from Kconfig
drm/i915: Fix NULL plane->fb oops on SKL
drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
drm/i915/dp: fall back to 18 bpp when sink capability is unknown
drm/i915: Make sure DC writes are coherent on flush.
Joe Lawrence [Wed, 3 Feb 2016 17:51:12 +0000 (12:51 -0500)]
xhci: harden xhci_find_next_ext_cap against device removal
xhci_find_next_ext_cap doesn't check for PCI hotplug removal and may use
the PCI master abort bit pattern (~0) to calculate a new PCI address
offset to read/write. The has lead to reproducable crashes when testing
surprise removal during device initialization on a Stratus platform, at
least after commit
d5ddcdf4d672 ("xhci: rework xhci extended capability
list parsing functions").
The crash is repeatable on a Stratus platform when injecting hardware
faults to induce xHCI host controller hotplug during driver
initialization. If a PCI read in xhci_find_next_ext_cap returns the
master abort pattern, quirk_usb_handoff_xhci may start using a bogus
ext_cap_offset to start searching more bogus PCI addresses.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 4 Feb 2016 22:09:55 +0000 (14:09 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Nothing particularly interesting here, but all important fixes
nonetheless:
- Add missing PAN toggling in the futex code
- Fix missing #include that briefly caused issues in -next
- Allow changing of vmalloc permissions with set_memory_* (used by
bpf)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: asm: Explicitly include linux/personality.h in asm/page.h
arm64: futex.h: Add missing PAN toggling
arm64: allow vmalloc regions to be set with set_memory_*
Dinh Nguyen [Wed, 3 Feb 2016 17:03:06 +0000 (11:03 -0600)]
ARM: multi_v7_defconfig: enable DW_WATCHDOG
The watchdog timer on the SoCFPGA platform is the Synopsys Designware watchdog.
Enable CONFIG_DW_WATCHDOG for the driver to get built.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Walleij [Mon, 1 Feb 2016 13:18:57 +0000 (14:18 +0100)]
ARM: nomadik: fix up SD/MMC DT settings
The DTSI file for the Nomadik does not properly specify how the
PL180 levelshifter is connected: the Nomadik actually needs all
the five st,sig-dir-* flags set to properly control all lines out.
Further this board supports full power cycling of the card, and
since this variant has no hardware clock gating, it needs a
ridiculously low frequency setting to keep up with the ever
overflowing FIFO.
The pin configuration set-up is a bit of a mystery, because of
course these pins are a mix of inputs and outputs. However the
reference implementation sets all pins to "output" with
unspecified initial value, so let's do that here as well.
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Greg Kroah-Hartman [Thu, 4 Feb 2016 21:07:23 +0000 (13:07 -0800)]
Merge tag 'fixes-for-v4.5-rc3' of git://git./linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.5-rc2
DWC3 got a fix for OTG Certification, DWC2 has two fixes for regressions on
RasPI, MUSB has a NULL pointer dereference fix for ux500 platforms and two
PHYs (MSM and MXS) got some minor fixes.
While at that, I'm also adding a fix to my email address which has changed
recently.
Linus Torvalds [Thu, 4 Feb 2016 19:50:15 +0000 (11:50 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/shli/md
Pull MD fix from Shaohua Li:
"As you know, Neil steps down from MD. I'm looking after it. Here are
some patches queued.
A build fix from Gayatri and several trival patches from me"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md-cluster: delete useless code
md-cluster: fix missing memory free
raid6/algos.c : bug fix : Add the missing definitions to the pq.h file
MD: add myself as MD maintainer
MD: rename some functions
Linus Torvalds [Thu, 4 Feb 2016 19:18:22 +0000 (11:18 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
- One minor fix to the ib core
- Four minor fixes to the Mellanox drivers
- Remove three deprecated drivers from staging/rdma now that all of
Greg's queued changes to them are merged
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
staging/rdma: remove deprecated ipath driver
staging/rdma: remove deprecated ehca driver
staging/rdma: remove deprecated amso1100 driver
IB/core: Set correct payload length for RoCEv2 over IPv6
IB/mlx5: Use MLX5_GET to correctly get end of padding mode
IB/mlx5: Fix use of null pointer PD
IB/mlx5: Fix reqlen validation in mlx5_ib_alloc_ucontext
IB/mlx5: Add CREATE_CQ and CREATE_QP to uverbs_ex_cmd_mask
Mauro Carvalho Chehab [Thu, 4 Feb 2016 17:59:43 +0000 (15:59 -0200)]
[media] saa7134-alsa: Only frees registered sound cards
That prevents this bug:
[ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at
0000000000000540
[ 2382.270013] IP: [<
ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd]
[ 2382.270013] PGD 0
[ 2382.270013] Oops: 0002 [#1] SMP
[ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops]
[ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ #4
[ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012 05/14/2008
[ 2382.270013] task:
ffff880039c38000 ti:
ffff88003c764000 task.ti:
ffff88003c764000
[ 2382.270013] RIP: 0010:[<
ffffffffa01fe616>] [<
ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd]
[ 2382.270013] RSP: 0018:
ffff88003c767ea0 EFLAGS:
00010286
[ 2382.270013] RAX:
ffff88003c767eb8 RBX:
0000000000000000 RCX:
0000000000006260
[ 2382.270013] RDX:
ffffffffa020a060 RSI:
ffffffffa0206de1 RDI:
ffff88003c767eb0
[ 2382.270013] RBP:
ffff88003c767ed8 R08:
0000000000019960 R09:
ffffffff811a5412
[ 2382.270013] R10:
ffffea0000d7c200 R11:
0000000000000000 R12:
ffff88003c767ea8
[ 2382.270013] R13:
00007ffe760617f7 R14:
0000000000000000 R15:
0000557625d7f1e0
[ 2382.270013] FS:
00007f80bb1c0700(0000) GS:
ffff88003f400000(0000) knlGS:
0000000000000000
[ 2382.270013] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 2382.270013] CR2:
0000000000000540 CR3:
000000003c00f000 CR4:
00000000000006f0
[ 2382.270013] Stack:
[ 2382.270013]
000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8
[ 2382.270013]
ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0
[ 2382.270013]
ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c
[ 2382.270013] Call Trace:
[ 2382.270013] [<
ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa]
[ 2382.270013] [<
ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0
[ 2382.270013] [<
ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d
[ 2382.270013] RIP [<
ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd]
[ 2382.270013] RSP <
ffff88003c767ea0>
[ 2382.270013] CR2:
0000000000000540
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Ilya Dryomov [Wed, 3 Feb 2016 14:25:48 +0000 (15:25 +0100)]
libceph: MOSDOpReply v7 encoding
Empty request_redirect_t (struct ceph_request_redirect in the kernel
client) is now encoded with a bool. NEW_OSDOPREPLY_ENCODING feature
bit overlaps with already supported CRUSH_TUNABLES5.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Ilya Dryomov [Mon, 1 Feb 2016 16:08:33 +0000 (17:08 +0100)]
libceph: advertise support for TUNABLES5
Add TUNABLES5 feature (chooseleaf_stable tunable) to a set of features
supported by default.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Ilya Dryomov [Mon, 1 Feb 2016 15:57:16 +0000 (16:57 +0100)]
crush: decode and initialize chooseleaf_stable
Also add missing \n while at it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Ilya Dryomov [Sun, 31 Jan 2016 13:36:07 +0000 (14:36 +0100)]
crush: add chooseleaf_stable tunable
Add a tunable to fix the bug that chooseleaf may cause unnecessary pg
migrations when some device fails.
Reflects ceph.git commit
fdb3f664448e80d984470f32f04e2e6f03ab52ec.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Ilya Dryomov [Sun, 31 Jan 2016 13:36:05 +0000 (14:36 +0100)]
crush: ensure take bucket value is valid
Ensure that the take argument is a valid bucket ID before indexing the
buckets array.
Reflects ceph.git commit
93ec538e8a667699876b72459b8ad78966d89c61.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Ilya Dryomov [Sun, 31 Jan 2016 13:35:59 +0000 (14:35 +0100)]
crush: ensure bucket id is valid before indexing buckets array
We were indexing the buckets array without verifying the index was
within the [0,max_buckets) range. This could happen because
a multistep rule does not have enough buckets and has CRUSH_ITEM_NONE
for an intermediate result, which would feed in CRUSH_ITEM_NONE and
make us crash.
Reflects ceph.git commit
976a24a326da8931e689ee22fce35feab5b67b76.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Yan, Zheng [Tue, 26 Jan 2016 15:05:37 +0000 (23:05 +0800)]
ceph: fix snap context leak in error path
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Dan Carpenter [Tue, 26 Jan 2016 09:24:44 +0000 (12:24 +0300)]
ceph: checking for IS_ERR instead of NULL
ceph_osdc_alloc_request() returns NULL on error, it never returns error
pointers.
Fixes: 5be0389dac66 ('ceph: re-send AIO write request when getting -EOLDSNAP error')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Takashi Iwai [Thu, 4 Feb 2016 16:06:13 +0000 (17:06 +0100)]
ALSA: timer: Fix leftover link at closing
In ALSA timer core, the active timer instance is managed in
active_list linked list. Each element is added / removed dynamically
at timer start, stop and in timer interrupt. The problem is that
snd_timer_interrupt() has a thinko and leaves the element in
active_list when it's the last opened element. This eventually leads
to list corruption or use-after-free error.
This hasn't been revealed because we used to delete the list forcibly
in snd_timer_stop() in the past. However, the recent fix avoids the
double-stop behavior (in commit [
f784beb75ce8: ALSA: timer: Fix link
corruption due to double start or stop]), and this leak hits reality.
This patch fixes the link management in snd_timer_interrupt(). Now it
simply unlinks no matter which stream is.
BugLink: http://lkml.kernel.org/r/CACT4Y+Yy2aukHP-EDp8-ziNqNNmb-NTf=jDWXMP7jB8HDa2vng@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mauro Carvalho Chehab [Wed, 3 Feb 2016 21:30:31 +0000 (19:30 -0200)]
[media] vb2-core: call threadio->fnc() if !VB2_BUF_STATE_ERROR
changeset
70433a152f0 ("media: videobuf2: Refactor vb2_fileio_data
and vb2_thread") broke videobuf2-dvb.
The root cause is that, instead of calling threadio->fnc() for
all types of events except for VB2_BUF_STATE_ERROR, it was calling
it only for VB2_BUF_STATE_DONE.
With that, the DVB thread were never called.
Cc: stable@vger.kernel.org # Kernel >= 4.3
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Wed, 27 Jan 2016 12:08:42 +0000 (10:08 -0200)]
[media] vb2: fix nasty vb2_thread regression
The vb2_thread implementation was made generic and was moved from
videobuf2-v4l2.c to videobuf2-core.c in commit
af3bac1a. Unfortunately
that clearly was never tested since it broke read() causing NULL address
references.
The root cause was confused handling of vb2_buffer vs v4l2_buffer (the pb
pointer in various core functions).
The v4l2_buffer no longer exists after moving the code into the core and
it is no longer needed. However, the vb2_thread code passed a pointer to
a vb2_buffer to the core functions were a v4l2_buffer pointer was expected
and vb2_thread expected that the vb2_buffer fields would be filled in
correctly.
This is obviously wrong since v4l2_buffer != vb2_buffer. Note that the
pb pointer is a void pointer, so no type-checking took place.
This patch fixes this problem:
1) allow pb to be NULL for vb2_core_(d)qbuf. The vb2_thread code will use
a NULL pointer here since they don't care about v4l2_buffer anyway.
2) let vb2_core_dqbuf pass back the index of the received buffer. This is
all vb2_thread needs: this index is the index into the q->bufs array
and vb2_thread just gets the vb2_buffer from there.
3) the fileio->b pointer (that originally contained a v4l2_buffer) is
removed altogether since it is no longer needed.
Tested with vivid and the cobalt driver.
Cc: stable@vger.kernel.org # Kernel >= 4.3
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Wed, 3 Feb 2016 19:33:48 +0000 (17:33 -0200)]
[media] tda1004x: only update the frontend properties if locked
The tda1004x was updating the properties cache before locking.
If the device is not locked, the data at the registers are just
random values with no real meaning.
This caused the driver to fail with libdvbv5, as such library
calls GET_PROPERTY from time to time, in order to return the
DVB stats.
Tested with a saa7134 card 78:
ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Shaohua Li [Wed, 3 Feb 2016 23:43:59 +0000 (15:43 -0800)]
Merge branch 'mymd/for-next' into mymd/for-linus
Mathias Nyman [Tue, 26 Jan 2016 15:50:12 +0000 (17:50 +0200)]
xhci: Fix list corruption in urb dequeue at host removal
xhci driver frees data for all devices, both usb2 and and usb3 the
first time usb_remove_hcd() is called, including td_list and and xhci_ring
structures.
When usb_remove_hcd() is called a second time for the second xhci bus it
will try to dequeue all pending urbs, and touches td_list which is already
freed for that endpoint.
Cc: <stable@vger.kernel.org>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregory CLEMENT [Tue, 26 Jan 2016 15:50:11 +0000 (17:50 +0200)]
usb: host: xhci-plat: fix NULL pointer in probe for device tree case
During probe, in the device tree case, the data pointer associated to a
compatible is dereferenced. However, not all the compatibles are
associated to a private data pointer.
The generic-xhci and the xhci-platform don't need them, this patch adds a
test on the data pointer before accessing it, avoiding a kernel crash.
Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv")
Cc: stable@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Tue, 26 Jan 2016 15:50:10 +0000 (17:50 +0200)]
usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling
when ip fails to enter sleep mode, register access protection will
be disabled, at the same time if all clocks are disabled, access
register will hang up AHB bus.
the common case causes ip sleep failure is that after all ports
enter U3 but before ip enters sleep mode, a port receives a resume
signal('K'). this will happens when such as clicks mouse to try to
do remote-wakeup to stop system enter suspend.
so stop polling root hubs to avoid access xHCI register on bus
suspend, and restart it when bus resumes.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Tue, 26 Jan 2016 15:50:09 +0000 (17:50 +0200)]
usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT
when a LS or FS device doesn't connect though a HS hub,
the @bPkts field of its periodic endpoint context should
be set to 1.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lu Baolu [Tue, 26 Jan 2016 15:50:08 +0000 (17:50 +0200)]
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well.
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lu Baolu [Tue, 26 Jan 2016 15:50:07 +0000 (17:50 +0200)]
usb: xhci: set SSIC port unused only if xhci_suspend succeeds
XHCI_SSIC_PORT_UNUSED quirk was applied to the xHCI host controllers
in some Intel SoC chips. With this quirk applied, SSIC port is set
to "unused" prior to xhci_suspend(). This may cause problem if host
fails to suspend. In this case, the port is set to unused without
host further entering D3, and the port will not be usable anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lu Baolu [Tue, 26 Jan 2016 15:50:06 +0000 (17:50 +0200)]
usb: xhci: add a quirk bit for ssic port unused
Two workarounds introduced by commit
b8cb91e058cd ("xhci: Workaround
for PME stuck issues in Intel xhci") and commit
abce329c27b3 ("xhci:
Workaround to get D3 working in Intel xHCI") share a single quirk bit
XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and
might happen on different hardwares. Need to separate them by adding a
quirk bit for the later.
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lu Baolu [Tue, 26 Jan 2016 15:50:05 +0000 (17:50 +0200)]
usb: xhci: handle both SSIC ports in PME stuck quirk
Commit
abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI")
adds a workaround for a limitation of PME storm caused by SSIC port in
some Intel SoCs. This commit only handled one SSIC port, while there
are actually two SSIC ports in the chips. This patch handles both SSIC
ports. Without this fix, users still see PME storm.
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jianqiang Tang [Wed, 20 Jan 2016 06:09:39 +0000 (14:09 +0800)]
usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.
This patch is needed in order to pass one test case
defined in the OTG Automated Compliance Test specification.
Specification location:
http://www.usb.org/developers/onthego/otgeh_compliance_plan_1_2.pdf
This test case uses PET Tool, and PET Tool is one USB hardware
equipment provided by MQP Electronics.
Test case id is 6.8.3 B-UUT Bypass Capacitance.
We must set this otg flag in order to be able to return OTG
descriptor during enumeration, otherwise this test case with
failed with below error: "Get OTG descriptor request stalled".
Signed-off-by: Jianqiang Tang <jianqiang.tang@intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Mathias Nyman [Tue, 26 Jan 2016 15:50:04 +0000 (17:50 +0200)]
Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
This reverts commit
e210c422b6fd ("xhci: don't finish a TD if we get a
short transfer event mid TD")
Turns out that most host controllers do not follow the xHCI specs and never
send the second event for the last TRB in the TD if there was a short event
mid-TD.
Returning the URB directly after the first short-transfer event is far
better than never returning the URB. (class drivers usually timeout
after 30sec). For the hosts that do send the second event we will go
back to treating it as misplaced event and print an error message for it.
The origial patch was sent to stable kernels and needs to be reverted from
there as well
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Wed, 3 Feb 2016 18:23:01 +0000 (20:23 +0200)]
MAINTAINERS: fix my email address
As I'm not working for Texas Instruments anymore,
balbi@ti.com isn't a valid address. I'll be using
balbi@kernel.org at least for the time being.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Mark Brown [Thu, 28 Jan 2016 12:18:28 +0000 (12:18 +0000)]
arm64: asm: Explicitly include linux/personality.h in asm/page.h
asm/page.h uses READ_IMPLIES_EXEC from linux/personality.h but does not
explicitly include it causing build failures in -next where whatever was
causing it to be implicitly included has changed to remove that
inclusion. Add an explicit inclusion to fix this.
Signed-off-by: Mark Brown <broonie@kernel.org>
[will: moved #include inside #ifndef __ASSEMBLY__ block]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Alex Deucher [Tue, 2 Feb 2016 23:22:24 +0000 (18:22 -0500)]
drm/amdgpu: disable uvd and vce clockgating on Fiji
Doesn't work properly yet.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Youn [Tue, 12 Jan 2016 00:32:28 +0000 (16:32 -0800)]
usb: dwc2: Fix probe problem on bcm2835
Fixes an issue found on Raspberry PI platform that prevents probe. Don't
skip setting the force mode if it's already set.
Fixes: 09c96980dc72 ("usb: dwc2: Add functions to set and clear force mode")
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Remi Pommarel <repk@triplefau.lt>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
John Youn [Tue, 12 Jan 2016 00:32:14 +0000 (16:32 -0800)]
Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"
This reverts commit
263b7fb557f7 ("usb: dwc2: Move reset into
dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB
ethernet fails, due to being unable to pick up proper parameters when
performing a plain reset before reading hw params.
Below shows the results of the gnptxfsiz and hptxfsiz with and before
and after reverting this (from Stefan Wahren):
So here is the probe result before Patch 1 is applied:
[ 1.283148] dwc2
20980000.usb: Configuration mismatch. dr_mode forced to host
[ 1.313894] dwc2
20980000.usb: gnptxfsiz=
00201000
[ 1.314104] dwc2
20980000.usb: hptxfsiz=
00000000
[ 1.353908] dwc2
20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration.
[ 1.354262] dwc2
20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration.
[ 1.394249] dwc2
20980000.usb: DWC OTG Controller
[ 1.394561] dwc2
20980000.usb: new USB bus registered, assigned bus number 1
[ 1.394917] dwc2
20980000.usb: irq 33, io mem 0x00000000
And here is the probe result after Patch 1 is applied:
[ 1.280107] dwc2
20980000.usb: Configuration mismatch. dr_mode forced to host
[ 1.353949] dwc2
20980000.usb: gnptxfsiz=
01001000
[ 1.354166] dwc2
20980000.usb: hptxfsiz=
02002000
[ 1.434301] dwc2
20980000.usb: DWC OTG Controller
[ 1.434616] dwc2
20980000.usb: new USB bus registered, assigned bus number 1
[ 1.434973] dwc2
20980000.usb: irq 33, io mem 0x00000000
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Remi Pommarel <repk@triplefau.lt>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Rafael J. Wysocki [Sat, 30 Jan 2016 11:54:29 +0000 (12:54 +0100)]
PM: Avoid false-positive warnings in dev_pm_domain_set()
There is a WARN_ON() in dev_pm_domain_set() that triggers on attempts
to set the pm_domain pointer for devices with a driver bound.
However, that WARN_ON() triggers on attempts to clear the pointer
too and the test it uses is based on checking the device's
p->knode_driver pointer which still is set when the device bus
type's/driver's ->remove callback has been executed. This
leads to false-positive warnings when bus type code calls
dev_pm_domain_set() to clear the pm_domain pointer after
invoking the driver's ->remove() callback.
To avoid those false-positives, make dev_pm_domain_set() check
if the pointer passed to it is NULL and skip the warning in
that case.
Fixes: 989561de9b51 (PM / Domains: add setter for dev.pm_domain)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Linus Torvalds [Wed, 3 Feb 2016 18:10:02 +0000 (10:10 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"18 fixes"
[ The 18 fixes turned into 17 commits, because one of the fixes was a
fix for another patch in the series that I just folded in by editing
the patch manually - hopefully correctly - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix memory leak in copy_huge_pmd()
drivers/hwspinlock: fix race between radix tree insertion and lookup
radix-tree: fix race in gang lookup
mm/vmpressure.c: fix subtree pressure detection
mm: polish virtual memory accounting
mm: warn about VmData over RLIMIT_DATA
Documentation: cgroup-v2: add memory.stat::sock description
mm: memcontrol: drop superfluous entry in the per-memcg stats array
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
proc: revert /proc/<pid>/maps [stack:TID] annotation
numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
MAINTAINERS: update Seth email
ocfs2/cluster: fix memory leak in o2hb_region_release
lib/test-string_helpers.c: fix and improve string_get_size() tests
thp: limit number of object to scan on deferred_split_scan()
thp: change deferred_split_count() to return number of THP in queue
thp: make split_queue per-node
Linus Torvalds [Wed, 3 Feb 2016 18:04:58 +0000 (10:04 -0800)]
Merge tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI fix from Corey Minyard:
"Fix a compile error on IPMI when ACPI is disabled"
* tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: put acpi.h with the other headers
Ulf Hansson [Mon, 25 Jan 2016 12:01:29 +0000 (13:01 +0100)]
usb: musb: ux500: Fix NULL pointer dereference at system PM
The commit
7d32cdef5356 ("usb: musb: fail with error when no DMA
controller set"), caused the core platform driver to correctly return an
error code when fail probing.
Unfurtante it also caused bug for a NULL pointer dereference, during
system suspend for the ux500 driver. The reason is a lacking validation
of the corresponding ->driver_data pointer, which won't be set when the
musb core driver fails to probe (or haven't yet been probed).
Fixes: 7d32cdef5356 ("usb: musb: fail with error when no DMA...")
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Li Jun [Thu, 21 Jan 2016 07:51:26 +0000 (15:51 +0800)]
usb: phy: mxs: declare variable with initialized value
Initialize vbus_value to be 0 since it's possible not to assign
any value before judgement.
Acked-by: Peter Chen <peter.chen@nxp.com
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Linus Torvalds [Wed, 3 Feb 2016 17:55:50 +0000 (09:55 -0800)]
Merge tag 'devicetree-fixes-for-4.5' of git://git./linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- Fix build error with *_OF_DECLARE() when used in modules
- Add missing platform maintainers for dts files in MAINTAINERS
* tag 'devicetree-fixes-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: drop symbols declared by _OF_DECLARE() from modules
MAINTAINERS: Add missing platform maintainers for dts files
Srinivas Kandagatla [Wed, 13 Jan 2016 09:13:10 +0000 (09:13 +0000)]
usb: phy: msm: fix error handling in probe.
This driver registers for extcon events as part of its probe, but
never unregisters them in case of error in the probe path.
There were multiple issues noticed due to this missing error handling.
One of them is random crashes if the regulators are not ready yet by the
time probe is invoked.
Ivan's previous attempt [1] to fix this issue, did not really address
all the failure cases like regualtor/get_irq failures.
[1] https://lkml.org/lkml/2015/9/7/62
Without this patch the kernel would carsh with log:
...
Unable to handle kernel paging request at virtual address
17d78410
pgd =
ffffffc001a5c000
[
17d78410] *pgd=
00000000b6806003, *pud=
00000000b6806003, *pmd=
0000000000000000
Internal error: Oops:
96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
Workqueue: deferwq deferred_probe_work_func
task:
ffffffc03686e900 ti:
ffffffc0368b0000 task.ti:
ffffffc0368b0000
PC is at raw_notifier_chain_register+0x1c/0x44
LR is at extcon_register_notifier+0x88/0xc8
pc : [<
ffffffc0000da43c>] lr : [<
ffffffc000606298>] pstate:
80000085
sp :
ffffffc0368b3a70
x29:
ffffffc0368b3a70 x28:
ffffffc03680c310
x27:
ffffffc035518000 x26:
ffffffc035518000
x25:
ffffffc03bfa20e0 x24:
ffffffc035580a18
x23:
0000000000000000 x22:
ffffffc035518458
x21:
ffffffc0355e9a60 x20:
ffffffc035518000
x19:
0000000000000000 x18:
0000000000000028
x17:
0000000000000003 x16:
ffffffc0018153c8
x15:
0000000000000001 x14:
ffffffc03686f0f8
x13:
ffffffc03686f0f8 x12:
0000000000000003
x11:
0000000000000001 x10:
0000000000000001
x9 :
ffffffc03686f0f8 x8 :
0000e3872014c1a1
x7 :
0000000000000028 x6 :
0000000000000000
x5 :
0000000000000001 x4 :
0000000000000000
x3 :
00000000354fb170 x2 :
0000000017d78400
x1 :
ffffffc0355e9a60 x0 :
ffffffc0354fb268
Fixes: 591fc116f330 ("usb: phy: msm: Use extcon framework for VBUS and ID detection")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Linus Torvalds [Wed, 3 Feb 2016 17:36:41 +0000 (09:36 -0800)]
Merge tag 'nfs-for-4.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfix and cleanup from Trond Myklebust:
"Bugfix:
- pNFS: Fix for missing layoutreturn calls
Cleanup:
- pNFS: rename NFS_LAYOUT_RETURN_BEFORE_CLOSE for code clarity"
* tag 'nfs-for-4.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Cleanup - rename NFS_LAYOUT_RETURN_BEFORE_CLOSE
pNFS: Fix missing layoutreturn calls
Linus Torvalds [Wed, 3 Feb 2016 17:31:34 +0000 (09:31 -0800)]
Merge tag 'trace-v4.5-rc1-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"A cleanup to the stack tracer broke stack tracing on s390. Here's a
simple fix to correct that issue"
* tag 'trace-v4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/stacktrace: Show entire trace if passed in function not found
Hugh Dickins [Sun, 31 Jan 2016 02:03:16 +0000 (18:03 -0800)]
mm: retire GUP WARN_ON_ONCE that outlived its usefulness
Trinity is now hitting the WARN_ON_ONCE we added in v3.15 commit
cda540ace6a1 ("mm: get_user_pages(write,force) refuse to COW in shared
areas"). The warning has served its purpose, nobody was harmed by that
change, so just remove the warning to generate less noise from Trinity.
Which reminds me of the comment I wrongly left behind with that commit
(but was spotted at the time by Kirill), which has since moved into a
separate function, and become even more obscure: delete it.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tony Camuso [Tue, 2 Feb 2016 18:57:24 +0000 (13:57 -0500)]
ipmi: put acpi.h with the other headers
Enclosing '#include <linux/acpi.h>' within '#ifdef CONFIG_ACPI' is
unnecessary, since it has its own conditional compile for CONFIG_ACPI.
Commit
0fbcf4af7c83 ("ipmi: Convert the IPMI SI ACPI handling to a
platform device") exposed this as a problem for platforms that do not
support ACPI when it introduced a call to ACPI_PTR() macro outside of
the CONFIG_ACPI conditional compile. This would have been perfectly
acceptable if acpi.h were not conditionally excluded for the non-acpi
platform, because the conditional compile within acpi.h defines
ACPI_PTR() to return NULL when compiled for non acpi platforms.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Fixed commit reference in header to conform to standard.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
projects / openwrt / staging / blogic.git / log