Ville Syrjälä [Fri, 27 Oct 2017 13:43:48 +0000 (16:43 +0300)]
drm/i915: Fix BXT lane latency optimal setting with MST
Call the DDI .pre_pll_enable() hook from the MST code so that BXT gets
the correct lane latency optimal setting applied. And we obviously need
to compute the correct value, and read it out to keep the state checker
happy.
While at it drop the useless 'encoder' parameter to
bxt_ddi_phy_calc_lane_lat_optim_mask()
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027134348.31190-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Ville Syrjälä [Thu, 19 Oct 2017 13:37:15 +0000 (16:37 +0300)]
drm/i915: Stop using encoder->type in intel_ddi_enable_transcoder_func()
intel_ddi_enable_transcoder_func() already has the crtc state so we can
use that instead of the untrustworthy encoder->type.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019133721.11794-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Ville Syrjälä [Thu, 19 Oct 2017 13:37:14 +0000 (16:37 +0300)]
drm/i915: Start using output_types for DPLL selection
encoder->type is not realiable for DP/HDMI so let's switch the DPLL
selection over to using output_types.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019133721.11794-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Ville Syrjälä [Thu, 19 Oct 2017 13:37:13 +0000 (16:37 +0300)]
drm/i915: Pass crtc state to intel_prepare_dp_ddi_buffers()
Eliminate intel_prepare_dp_ddi_buffers()'s reliance on the encoder->type
by passing in the crtc state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019133721.11794-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Ville Syrjälä [Thu, 19 Oct 2017 13:37:12 +0000 (16:37 +0300)]
drm/i915: Don't use encoder->type in intel_ddi_set_pipe_settings()
encoder->type isn't reliable for DP/HDMI so instead extract the correct
type from the crtc state in intel_ddi_set_pipe_settings().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019133721.11794-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Chris Wilson [Thu, 26 Oct 2017 13:00:32 +0000 (14:00 +0100)]
drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)
Kasan spotted
[IGT] gem_tiled_pread_pwrite: exiting, ret=0
==================================================================
BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
Read of size 8 at addr
ffff8801359da310 by task kworker/3:2/182
CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.
1708222146 08/22/2017
Workqueue: events __i915_gem_free_work [i915]
Call Trace:
dump_stack+0x68/0xa0
print_address_description+0x78/0x290
? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
kasan_report+0x23d/0x350
__asan_report_load8_noabort+0x19/0x20
__i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
? i915_gem_object_truncate+0x100/0x100 [i915]
? lock_acquire+0x380/0x380
__i915_gem_object_put_pages+0x30d/0x530 [i915]
__i915_gem_free_objects+0x551/0xbd0 [i915]
? lock_acquire+0x13e/0x380
__i915_gem_free_work+0x4e/0x70 [i915]
process_one_work+0x6f6/0x1590
? pwq_dec_nr_in_flight+0x2b0/0x2b0
worker_thread+0xe6/0xe90
? pci_mmcfg_check_reserved+0x110/0x110
kthread+0x309/0x410
? process_one_work+0x1590/0x1590
? kthread_create_on_node+0xb0/0xb0
ret_from_fork+0x27/0x40
Allocated by task 1801:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xee/0x190
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xdc/0x2e0
radix_tree_node_alloc.constprop.12+0x48/0x330
__radix_tree_create+0x274/0x480
__radix_tree_insert+0xa2/0x610
i915_gem_object_get_sg+0x224/0x670 [i915]
i915_gem_object_get_page+0xb5/0x1c0 [i915]
i915_gem_pread_ioctl+0x822/0xf60 [i915]
drm_ioctl_kernel+0x13f/0x1c0
drm_ioctl+0x6cf/0x980
do_vfs_ioctl+0x184/0xf30
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
Freed by task 37:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xaf/0x190
kmem_cache_free+0xbf/0x340
radix_tree_node_rcu_free+0x79/0x90
rcu_process_callbacks+0x46d/0xf40
__do_softirq+0x21c/0x8d3
The buggy address belongs to the object at
ffff8801359da0f0
which belongs to the cache radix_tree_node of size 576
The buggy address is located 544 bytes inside of
576-byte region [
ffff8801359da0f0,
ffff8801359da330)
The buggy address belongs to the page:
page:
ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw:
8000000000008100 0000000000000000 0000000000000000 0000000100110011
raw:
ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^
ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Chris Wilson [Thu, 26 Oct 2017 13:00:31 +0000 (14:00 +0100)]
drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects)
Kasan spotted
[IGT] gem_tiled_pread_pwrite: exiting, ret=0
==================================================================
BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
Read of size 8 at addr
ffff8801359da310 by task kworker/3:2/182
CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.
1708222146 08/22/2017
Workqueue: events __i915_gem_free_work [i915]
Call Trace:
dump_stack+0x68/0xa0
print_address_description+0x78/0x290
? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
kasan_report+0x23d/0x350
__asan_report_load8_noabort+0x19/0x20
__i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
? i915_gem_object_truncate+0x100/0x100 [i915]
? lock_acquire+0x380/0x380
__i915_gem_object_put_pages+0x30d/0x530 [i915]
__i915_gem_free_objects+0x551/0xbd0 [i915]
? lock_acquire+0x13e/0x380
__i915_gem_free_work+0x4e/0x70 [i915]
process_one_work+0x6f6/0x1590
? pwq_dec_nr_in_flight+0x2b0/0x2b0
worker_thread+0xe6/0xe90
? pci_mmcfg_check_reserved+0x110/0x110
kthread+0x309/0x410
? process_one_work+0x1590/0x1590
? kthread_create_on_node+0xb0/0xb0
ret_from_fork+0x27/0x40
Allocated by task 1801:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xee/0x190
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xdc/0x2e0
radix_tree_node_alloc.constprop.12+0x48/0x330
__radix_tree_create+0x274/0x480
__radix_tree_insert+0xa2/0x610
i915_gem_object_get_sg+0x224/0x670 [i915]
i915_gem_object_get_page+0xb5/0x1c0 [i915]
i915_gem_pread_ioctl+0x822/0xf60 [i915]
drm_ioctl_kernel+0x13f/0x1c0
drm_ioctl+0x6cf/0x980
do_vfs_ioctl+0x184/0xf30
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
Freed by task 37:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xaf/0x190
kmem_cache_free+0xbf/0x340
radix_tree_node_rcu_free+0x79/0x90
rcu_process_callbacks+0x46d/0xf40
__do_softirq+0x21c/0x8d3
The buggy address belongs to the object at
ffff8801359da0f0
which belongs to the cache radix_tree_node of size 576
The buggy address is located 544 bytes inside of
576-byte region [
ffff8801359da0f0,
ffff8801359da330)
The buggy address belongs to the page:
page:
ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw:
8000000000008100 0000000000000000 0000000000000000 0000000100110011
raw:
ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^
ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: 96d776345277 ("drm/i915: Use a radixtree for random access to the object's backing storage")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Chris Wilson [Fri, 27 Oct 2017 09:43:11 +0000 (10:43 +0100)]
drm/i915: Empty the ring before disabling
An interesting snippet from Sandybridge's prm:
"Although a Ring Buffer can be enabled in the non-empty state, it must
not be disabled unless it is empty. Attempting to disable a Ring Buffer
in the non-empty state is UNDEFINED."
Let's avoid the undefined behaviour as we disable the rings prior to
reset and resume.
v2: Tell HEAD to catch up to TAIL (empty ring) first, then reset both to
0 (supposedly while stopped).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027094311.30380-1-chris@chris-wilson.co.uk
Jani Nikula [Thu, 26 Oct 2017 14:29:32 +0000 (17:29 +0300)]
drm/i915/edp: clean up code and comments around eDP DPCD read
Some minor drive-by cleanups.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026142932.17737-2-jani.nikula@intel.com
Jani Nikula [Thu, 26 Oct 2017 14:29:31 +0000 (17:29 +0300)]
drm/i915/edp: read edp display control registers unconditionally
Per my reading of the eDP spec, DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in
DP_EDP_CONFIGURATION_CAP should be set if the eDP display control
registers starting at offset DP_EDP_DPCD_REV are "enabled". Currently we
check the bit before reading the registers, and DP_EDP_DPCD_REV is the
only way to detect eDP revision.
Turns out there are (likely buggy) displays that require eDP 1.4+
features, such as supported link rates and link rate select, but do not
have the bit set. Read the display control registers
unconditionally. They are supposed to read zero anyway if they are not
supported, so there should be no harm in this.
This fixes the referenced bug by enabling the eDP version check, and
thus reading of the supported link rates. The panel in question has 0 in
DP_MAX_LINK_RATE which is only supported in eDP 1.4+. Without the
supported link rates method we default to RBR which is insufficient for
the panel native mode. As a curiosity, the panel also has a bogus value
of 0x12 in DP_EDP_DPCD_REV, but that passes our check for >= DP_EDP_14
(which is 0x03).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103400
Reported-and-tested-by: Nicolas P. <issun.artiste@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026142932.17737-1-jani.nikula@intel.com
Maarten Lankhorst [Thu, 19 Oct 2017 15:13:41 +0000 (17:13 +0200)]
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.
When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.
Changes since v1:
- Use intel_atomic_get_old_crtc_state. (ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com
[mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself]
Cc: stable@vger.kernel.org #v4.8+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
Maarten Lankhorst [Thu, 19 Oct 2017 15:13:40 +0000 (17:13 +0200)]
drm/i915: Do not rely on wm preservation for ILK watermarks
The original intent was to preserve watermarks as much as possible
in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm.
It seems this approach is insufficient and we don't always preserve
the raw watermarks, so just use the atomic iterator we're already using
to get a const pointer to all bound planes on the crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org #v4.8+
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com
Manasi Navare [Thu, 26 Oct 2017 21:52:00 +0000 (14:52 -0700)]
drm/i915: Cancel the modeset retry work during modeset cleanup
During modeset cleanup on driver unload we may have a pending
hotplug work. This needs to be canceled early during the teardown
so that it does not fire after we have freed the connector.
We do this after drm_kms_helper_poll_fini(dev) since this might
trigger modeset retry work due to link retrain and before
intel_fbdev_fini() since this work requires the lock from fbdev.
If this is not done we may see something like:
DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
------------[ cut here ]------------
WARNING: CPU: 4 PID: 5010 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x4e/0x60
Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178
+a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid
+[last unloaded: snd_hda_intel]
CPU: 4 PID: 5010 Comm: drv_module_relo Tainted: G U 4.14.0-rc3-CI-CI_DRM_3186+ #1
Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.
1709140524 09/14/2017
task:
ffff8803c827aa40 task.stack:
ffffc90000520000
RIP: 0010:mutex_destroy+0x4e/0x60
RSP: 0018:
ffffc90000523d58 EFLAGS:
00010292
RAX:
000000000000002a RBX:
ffff88044fbef648 RCX:
0000000000000000
RDX:
0000000080000001 RSI:
0000000000000001 RDI:
ffffffff810f0cf0
RBP:
ffffc90000523d60 R08:
0000000000000001 R09:
0000000000000001
R10:
000000000f21cb81 R11:
0000000000000000 R12:
ffff88044f71efc8
R13:
ffffffffa02b3d20 R14:
ffffffffa02b3d90 R15:
ffff880459b29308
FS:
00007f5df4d6e8c0(0000) GS:
ffff88045d300000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055ec51f00a18 CR3:
0000000451782006 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
drm_fb_helper_fini+0xd9/0x130
intel_fbdev_destroy+0x12/0x60 [i915]
intel_fbdev_fini+0x28/0x30 [i915]
intel_modeset_cleanup+0x45/0xa0 [i915]
i915_driver_unload+0x92/0x180 [i915]
i915_pci_remove+0x19/0x30 [i915]
i915_driver_unload+0x92/0x180 [i915]
i915_pci_remove+0x19/0x30 [i915]
pci_device_remove+0x39/0xb0
device_release_driver_internal+0x15d/0x220
driver_detach+0x40/0x80
bus_remove_driver+0x58/0xd0
driver_unregister+0x2c/0x40
pci_unregister_driver+0x36/0xb0
i915_exit+0x1a/0x8b [i915]
SyS_delete_module+0x18c/0x1e0
entry_SYSCALL_64_fastpath+0x1c/0xb1
RIP: 0033:0x7f5df3286287
RSP: 002b:
00007fff8e107cc8 EFLAGS:
00000246 ORIG_RAX:
00000000000000b0
RAX:
ffffffffffffffda RBX:
ffffffff81493a03 RCX:
00007f5df3286287
RDX:
0000000000000001 RSI:
0000000000000800 RDI:
0000564c7be02e48
RBP:
ffffc90000523f88 R08:
0000000000000000 R09:
0000000000000080
R10:
00007f5df4d6e8c0 R11:
0000000000000246 R12:
0000000000000000
R13:
00007fff8e107eb0 R14:
0000000000000000 R15:
0000000000000000
Or a GPF like:
general protection fault: 0000 [#1] PREEMPT SMP
Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178
+a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid
+[last unloaded: snd_hda_intel]
CPU: 0 PID: 82 Comm: kworker/0:1 Tainted: G U W 4.14.0-rc3-CI-CI_DRM_3186+ #1
Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.
1709140524 09/14/2017
Workqueue: events intel_dp_modeset_retry_work_fn [i915]
task:
ffff88045a5caa40 task.stack:
ffffc90000378000
RIP: 0010:drm_setup_crtcs+0x143/0xbf0
RSP: 0018:
ffffc9000037bd20 EFLAGS:
00010202
RAX:
6b6b6b6b6b6b6b6b RBX:
0000000000000002 RCX:
0000000000000001
RDX:
0000000000000001 RSI:
0000000000000780 RDI:
00000000ffffffff
RBP:
ffffc9000037bdb8 R08:
0000000000000001 R09:
0000000000000001
R10:
0000000000000780 R11:
0000000000000000 R12:
0000000000000002
R13:
ffff88044fbef4e8 R14:
0000000000000780 R15:
0000000000000438
FS:
0000000000000000(0000) GS:
ffff88045d200000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055ec51ee5168 CR3:
000000044c89d003 CR4:
00000000003606f0
Call Trace:
drm_fb_helper_hotplug_event.part.18+0x7e/0xc0
drm_fb_helper_hotplug_event+0x1a/0x20
intel_fbdev_output_poll_changed+0x1a/0x20 [i915]
drm_kms_helper_hotplug_event+0x27/0x30
intel_dp_modeset_retry_work_fn+0x77/0x80 [i915]
process_one_work+0x233/0x660
worker_thread+0x206/0x3b0
kthread+0x152/0x190
? process_one_work+0x660/0x660
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x27/0x40
Code: 06 00 00 45 8b 45 20 31 db 45 31 e4 45 85 c0 0f 8e 91 06 00 00 44 8b 75 94 44 8b 7d 90 49 8b 45 28 49 63 d4 44 89 f6 41 83 c4 01 <48> 8b 04 d0 44
+89 fa 48 8b 38 48 8b 87 a8 01 00 00 ff 50 20 01
RIP: drm_setup_crtcs+0x143/0xbf0 RSP:
ffffc9000037bd20
---[ end trace
08901ff1a77d30c7 ]---
v2:
* Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it
as the first step before cancel work (Chris Wilson)
* Add GPF trace in commit message and make the function static (Maarten Lankhorst)
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 9301397a63b3 ("drm/i915: Implement Link Rate fallback on Link training failure")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tony Cheng <tony.cheng@amd.com>
Cc: Harry Wentland <Harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1509054720-25325-1-git-send-email-manasi.d.navare@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 24 Oct 2017 18:15:47 +0000 (19:15 +0100)]
drm/i915: Add -Wall -Wextra to our build, set warnings to full
Recently W=1 on gcc-7.2 (-Wunused-const-variable) caught a regression
that had been lurking for 6 months, so lets try enabling the full set of
warnings for CI builds. This means more patches will be rejected early
that contain trivial and sometimes not so trivial bugs. However, our
code does not yet compile cleanly with W=1, so we have to apply a filter
to the set of warnings until we can eliminate the mistakes. It also
means that developers will have to be running the full gamut of gcc to
ensure that as warnings come and go with gcc updates, we have the CI
build prepared.
v2: Use fine-grained -Wno overrides. Inside the makefile, we can
specify CFLAGS on a per-object level, which allows us to limit the scope
of any particular warning override.
v3: Place per-file overrides after the main enabling block.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024181547.27889-1-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Thu, 26 Oct 2017 11:50:48 +0000 (12:50 +0100)]
drm/i915: Include RING_MODE when dumping the engine state
Knowing the RING_MODE flags is useful for checking the state of the
engine, such as whether the CS is idle after trying to stop the engines
before reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026115048.20144-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Michal Wajdeczko [Tue, 24 Oct 2017 10:50:56 +0000 (10:50 +0000)]
drm/i915/huc: Use helper function while waiting for DMA completion
Waiting for DMA status register can be done with dedicated function.
Lets use it as additional bonus will be smaller driver footprint.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024105056.43276-1-michal.wajdeczko@intel.com
Michał Winiarski [Thu, 26 Oct 2017 13:35:58 +0000 (15:35 +0200)]
drm/i915/guc: Preemption! With GuC
Pretty similar to what we have on execlists.
We're reusing most of the GEM code, however, due to GuC quirks we need a
couple of extra bits.
Preemption is implemented as GuC action, and actions can be pretty slow.
Because of that, we're using a mutex to serialize them. Since we're
requesting preemption from the tasklet, the task of creating a workitem
and wrapping it in GuC action is delegated to a worker.
To distinguish that preemption has finished, we're using additional
piece of HWSP, and since we're not getting context switch interrupts,
we're also adding a user interrupt.
The fact that our special preempt context has completed unfortunately
doesn't mean that we're ready to submit new work. We also need to wait
for GuC to finish its own processing.
v2: Don't compile out the wait for GuC, handle workqueue flush on reset,
no need for ordered workqueue, put on a reviewer hat when looking at my own
patches (Chris)
Move struct work around in intel_guc, move user interruput outside of
conditional (Michał)
Keep ring around rather than chase though intel_context
v3: Extract WA for flushing ggtt writes to a helper (Chris)
Keep work_struct in intel_guc rather than engine (Michał)
Use ordered workqueue for inject_preempt worker to avoid GuC quirks.
v4: Drop now unused INTEL_GUC_PREEMPT_OPTION_IMMEDIATE (Daniele)
Drop stray newlines, use container_of for intel_guc in worker,
check for presence of workqueue when flushing it, rather than
enable_guc_submission modparam, reorder preempt postprocessing (Chris)
v5: Make wq NULL after destroying it
v6: Swap struct guc_preempt_work members (Michał)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026133558.19580-1-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:18 +0000 (22:00 +0200)]
drm/i915: Rename helpers used for unwinding, use macro for can_preempt
We would also like to make use of execlist_cancel_port_requests and
unwind_incomplete_requests in GuC preemption backend.
Let's rename the functions to use the correct prefixes, so that we can
simply add the declarations in the following patch.
Similar thing for applies for can_preempt, except we're introducing
HAS_LOGICAL_RING_PREEMPTION macro instad, converting other users that
were previously touching device info directly.
v2: s/intel_engine/execlists and pass execlists to unwind (Chris)
v3: use locked version for exporting, drop const qual (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-11-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:17 +0000 (22:00 +0200)]
drm/i915/guc: Keep request->priority for its lifetime
We also want to support preemption with GuC submission backend.
In order to do that, we need to remember the priority, like we do on
execlists path.
v2: Remove completed prio == INT_MAX optimization
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-10-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:16 +0000 (22:00 +0200)]
drm/i915: Add information needed to track engine preempt state
We shouldn't inspect ELSP context status (or any other bits depending on
specific submission backend) when using GuC submission.
Let's use another piece of HWSP for preempt context, to write its bit of
information, meaning that preemption has finished, and hardware is now
idle.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-9-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:15 +0000 (22:00 +0200)]
drm/i915: Extract "emit write" part of emit breadcrumb functions
Let's separate the "emit" part from touching any internal structures,
this way we can have a generic "emit coherent GGTT write" function.
We would like to reuse this functionality for emitting HWSP write, to
confirm that preempt-to-idle has finished.
v2: Reorder args to match emit_pipe_control, s/render/rcs (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-8-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:14 +0000 (22:00 +0200)]
drm/i915/guc: Split guc_wq_item_append
We're using a special preempt context for HW to preempt into. We don't
want to emit any requests there, but we still need to wrap this context
into a valid GuC work item.
Let's cleanup the functions operating on GuC work items.
We can extract guc_request_add - responsible for adding GuC work item and
ringing the doorbell, and guc_wq_item_append - used by the function
above, not tied to the concept of gem request.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-7-michal.winiarski@intel.com
Dave Gordon [Thu, 26 Oct 2017 14:17:37 +0000 (16:17 +0200)]
drm/i915/guc: Add a second client, to be used for preemption
This second client is created with priority KMD_HIGH, and marked
as preemptive. This will allow us to request preemption using GuC actions.
v2: Extract clients creation into a helper, debugfs fixups. (Michał)
Recreate doorbell on init. (Daniele)
Move clients into an array.
v3: And move clients back from an array, to get rid of the enum (Michał)
v4: Use is_high_priority, move DRM_ERROR into __create_doorbell, move
GEM_BUG_ON inside guc_clients_create (Michał)
v5: Split the BUG_ON (Michał)
v6: Cleanup after error during doorbell reinit (Michał)
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026141737.31656-1-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:12 +0000 (22:00 +0200)]
drm/i915/guc: Add preemption action to GuC firmware interface
We're using GuC action to request preemption. However, after requesting
preemption we need to wait for GuC to finish its own post-processing
before we start submitting our requests. Firmware is using shared
context to report its status.
Let's update GuC firmware interface with those new definitions.
v2: Drop unused INTEL_GUC_PREEMPT_OPTION_IMMEDIATE
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-5-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:11 +0000 (22:00 +0200)]
drm/i915/guc: Allocate separate shared data object for GuC communication
We were using first page of kernel context render state for sharing data
with GuC. While it's justified by the fact that those pages are not used
(note, GuC still enforces this layout and refuses to work if we remove
the extra page in front), it's also confusing (why are we using this
particular page?). Let's allocate a separate object instead.
v2: Drop kernel_context from GuC suspend/resume action handlers (Michel)
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-4-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:10 +0000 (22:00 +0200)]
drm/i915/guc: Extract GuC stage desc pool creation into a helper
Since it's a two-step process, we can have a cleaner error handling in
the caller if we do the allocations in a helper.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-3-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:09 +0000 (22:00 +0200)]
drm/i915/guc: Do not use 0 for GuC doorbell cookie
Apparently, this value is reserved and may be interpreted as changing
doorbell ownership. Even though we're not observing any side effects
now, let's skip over it to be consistent with the spec.
v2: Apply checkpatch (Sagar)
Suggested-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-2-michal.winiarski@intel.com
Rodrigo Vivi [Thu, 26 Oct 2017 00:15:46 +0000 (17:15 -0700)]
drm/i915/cnl: Fix SSEU Device Status.
CNL adds an extra register for slice/subslice information.
Although no SKU is planed with an extra slice let's already
handle this extra piece of information so we don't have the
risk in future of getting a part that might have chosen this
part of the die instead of other slices or anything like that.
Also if subslice is disabled the information of eu ack for that
is garbage, so let's skip checks for eu if subslice is disabled
as we skip the subslice if slice is disabled.
The rest is pretty much like gen9.
v2: Remove IS_CANNONLAKE from gen9 status function.
v3: Consider s_max = 6 and ss_max=4 to run over all possible
slices and subslices possible by spec. Although no real
hardware will have that many slices/subslices.
To match with sseu info init.
v4: Fix offset calculation for slices 4 and 5.
Removed Oscar's rv-b since this change also needs review.
v5: Let's consider only valid bits for SLICE*_PGCTL_ACK.
This looks like wrong in Spec, but seems to be enough
for now. Whenever Spec gets updated and fixed we come
back and properly update the masks. Also add a FIXME,
so we can revisit this later when we find some strange
info on debugfs or when we noitce spec got updated.
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026001546.28203-1-rodrigo.vivi@intel.com
Michał Winiarski [Wed, 25 Oct 2017 17:25:19 +0000 (18:25 +0100)]
drm/i915/guc: Initialize GuC before restarting engines
Now that we're handling request resubmission the same way as regular
submission (from the tasklet), we can move GuC initialization earlier,
before restarting the engines. This way, we're no longer being in the
state of flux during engine restart - we're already in user requested
submission mode.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025172519.10670-5-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Wed, 25 Oct 2017 14:39:42 +0000 (15:39 +0100)]
drm/i915/guc: Always enable the breadcrumbs irq
The execlists emulation on top of the GuC (used for scheduling and
preemption) depends on the MI_USER_INTERRUPT for its notifications and
tasklet action. As we always employ the irq, there is no advantage in
ever disabling it while we are using the GuC, so allow us to arm the
breadcrumb irq when enabling GuC submission and disarm upon disabling.
The impact should be lessened by the delayed irq disabling we do (we
only disable after receiving an interrupt for which no one was wanting),
but allowing guc to explicitly manage the irq in relation to itself is
simpler and prevents an issue with losing an interrupt for preemption
as it is not coupled to an active request.
Internally, we add a reference counter (breadcrumbs.irq_enabled) as a
simple mechanism to allow GuC to keep the breadcrumb irq enabled. To
improve upon always enabling the irq while guc is selected, we need
to hook into the parking facility of intel_engines so that we only enable
the breadcrumbs while the GT is active (one step better would be to
individually park/unpark each engine).
In effect, this means that we keep the breadcrumb irq always enabled for
the entire duration the guc is busy, whereas before we would try to
switch it off whenever we idled for more than interrupt with no
associated waiters. The difference *should* be negligible in practice!
v2: Stop abusing fence signaling (and its auxiliary data structures) to
enable the breadcrumbs irqs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>,
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>,
Link: https://patchwork.freedesktop.org/patch/msgid/20171025143943.7661-3-chris@chris-wilson.co.uk
Chris Wilson [Wed, 25 Oct 2017 14:39:41 +0000 (15:39 +0100)]
drm/i915: Add a hook for making the engines idle (parking) and unparking
In the next patch, we will want to install a callback when the engines
(GT as a whole) become idle and similarly when they first become busy.
To enable that callback, first rename intel_engines_mark_idle() to
intel_engines_park() and provide the companion intel_engines_unpark().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025143943.7661-2-chris@chris-wilson.co.uk
Rodrigo Vivi [Tue, 3 Oct 2017 22:31:42 +0000 (15:31 -0700)]
drm/i915/cnl: Allow 2 pixel per clock on Cannonlake.
This is heavily based on a initial patch provided by Ville
plus all changes provided later by Ander.
As Geminilake, Cannonlake also supports 2 pixels per clock.
Different from Geminilake we are not implementing the 99% Wa.
But we can revisit that decision later if we find out
any limitation on later CNL SKUs.
v2: Rebase on top of commit '
d305e0614601 ("drm/i915: Track
minimum acceptable cdclk instead of "minimum dotclock")'
v3: When fixing HDMI on CNL I noticed that I missed to convert
back the doubled pixel rate to cdclk.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003223142.26264-1-rodrigo.vivi@intel.com
Joonas Lahtinen [Mon, 23 Oct 2017 15:32:09 +0000 (18:32 +0300)]
drm/i915: Disable lazy PPGTT page table optimization for vGPU
When running under virtualization (vGPU active), we must disable
the lazy PPGTT page table initialization optimization introduced by
commit
14826673247e ("drm/i915: Only initialize partially filled
pagetables").
We must do this because GVT-g makes unduly assumptions about guest
behaviour, which this optimization breaks. This results in following
looking errors in the host:
ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1
The real fix is to not to depend on i915 driver behaviour, but instead
either rely on only the contracts that i915 has with the hardware, or
add some paravirtualization. While the real fix is en route, it won't
be finished in time for 4.15, so the best option is to disable the
optimization for now when vGPU is active to avoid breaking 4.15 guests
in existing VM environments.
Fixes: 14826673247e ("drm/i915: Only initialize partially filled pagetables")
Suggested-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
[Joonas: Rewrote the commit message and added tags.]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com
Chris Wilson [Wed, 25 Oct 2017 13:13:36 +0000 (14:13 +0100)]
Revert "drm/i915/selftests: Convert timers to use timer_setup()"
This reverts commit
6d0dbd309687113009a276886628c7c74c848d3c.
timer_setup_on_stack() does not yet exist:
In file included from drivers/gpu/drm/i915/i915_sw_fence.c:517:0:
drivers/gpu/drm/i915/selftests/lib_sw_fence.c: In function ‘timed_fence_init’:
drivers/gpu/drm/i915/selftests/lib_sw_fence.c:63:2: error: implicit declaration of function ‘timer_setup_on_stack’; did you mean ‘hrtimer_init_on_stack’? [-Werror=implicit-function-declaration]
timer_setup_on_stack(&tf->timer, timed_fence_wake, 0);
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025131336.2584-1-chris@chris-wilson.co.uk
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Kees Cook [Tue, 24 Oct 2017 15:13:44 +0000 (08:13 -0700)]
drm/i915/selftests: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024151344.GA104417@beast
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 24 Oct 2017 22:08:55 +0000 (23:08 +0100)]
drm/i915: Use same test for eviction and submitting kernel context
During evict, we wish to idle the GPU if we see that the GGTT is full.
However, our test for idle in i915_gem_evict_something() and in
i915_gem_switch_to_kernel_context() do not match leading to
disappointment - we never believe that we are idle and keep trying to
flush the GGTT ad infinitum.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103438
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024220855.30155-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 24 Oct 2017 22:08:54 +0000 (23:08 +0100)]
drm/i915/selftests: Don't try to queue a request with zero delay
Instead of trying to create a timer with zero delay (i.e. with expires
set to the current jiffies and not the future, an already expired
timer), execute that request immediately.
v2: Refactor list_del_init+signal into its own little function.
v3: Reorder testing so as not to immediately signal a delayed request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024220855.30155-1-chris@chris-wilson.co.uk
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 24 Oct 2017 20:50:53 +0000 (21:50 +0100)]
drm/i915: Call cond_resched() before repeating i915_gem_evict_something()
Insert a breakpoint, a chance to escape back to the scheduler and run
something else for a bit, if we find that the GGTT is full and needs to
be idled in order to make some room. In practice, this should only be an
issue in stress tests as the wait itself will normally give the chance
for the scheduler to intervene and make progress.
References: https://bugs.freedesktop.org/show_bug.cgi?id=103438
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024205053.7845-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Ville Syrjälä [Tue, 24 Oct 2017 09:52:16 +0000 (12:52 +0300)]
drm/i915: Perform a central cdclk state sanity check
WARN if the cdclk state doesn't match what we expect after programming.
And let's remove the WARN from bdw_set_cdclk() that's trying to achieve
the same thing in a more limite fashion.
Also take the opportunity to refactor the code to use a common function
for dumping out a cdclk state.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-11-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Tue, 24 Oct 2017 09:52:15 +0000 (12:52 +0300)]
drm/i915: Sanity check cdclk in vlv_set_cdclk()
chv_set_cdclk() sanity checks that the cdclk frequency is one of the
legal values. Do the same in the VLV function.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-10-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Tue, 24 Oct 2017 09:52:14 +0000 (12:52 +0300)]
drm/i915: Adjust system agent voltage on CNL if required by DDI ports
On CNL we may need to bump up the system agent voltage not only due
to CDCLK but also when driving DDI port with a sufficiently high clock.
To that end start tracking the minimum acceptable voltage for each crtc.
We do the tracking via crtcs because we don't have any kind of encoder
state. Also there's no downside to doing it this way, and it matches how
we track cdclk requirements on account of pixel rate.
v2: Allow disabled crtcs to use the min voltage
Add IS_CNL check to intel_ddi_compute_min_voltage() since
we're using CNL specific values there
s/intel_compute_min_voltage/cnl_compute_min_voltage/ since
the function makes hw specific assumptions about the voltage
values
v3: Drop the test hack leftovers from skl_modeset_calc_cdclk()
v4: s/voltage/voltage_level/ (Rodrigo)
Replace DPLL DVFS FIXMEs with an explanation why we don't
do anything there (Rodrigo)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-9-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 24 Oct 2017 09:52:13 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on CNL
Track the system agent voltage we request from pcode in the cdclk state
on CNL. Annoyingly we can't actually read out the current value since
there's no pcode command to do that, so we'll have to just assume that
it worked.
v2: s/voltage/voltage_level/ (Rodrigo)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-8-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 24 Oct 2017 09:52:12 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on BXT/GLK
Track the system agent voltage we request from pcode in the cdclk state
on BXT/GLK. Annoyingly we can't actually read out the current value since
there's no pcode command to do that, so we'll have to just assume that
it worked.
v2: s/voltage/voltage_level/ (Rodrigo)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-7-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 24 Oct 2017 09:52:11 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on SKL/KBL/CFL
Track the system agent voltage we request from pcode in the cdclk state
on SKL/KBL/CFL. Annoyingly we can't actually read out the current value since
there's no pcode command to do that, so we'll have to just assume that
it worked.
v2: s/voltage/voltage_level/ (Rodrigo)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-6-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 24 Oct 2017 09:52:10 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on BDW
Track the system agent voltage we request from pcode in the cdclk state
on BDW. Annoyingly we can't actually read out the current value since
there's no pcode command to do that, so we'll have to just assume that
it worked.
v2: Keep the WARN_ON (Rodrigo)
v3: s/voltage/voltage_level/ (Rodrigo)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-5-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 24 Oct 2017 09:52:09 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on VLV/CHV
Store the punit DSPFREQUAR value into cdclk_state->voltage on
VLV/CHV. Since we can actually read that out from the hardware
this can give us a bit more cross checking between the hardware
and software state.
v2: Don't break waiting for cdclk change on VLV/CHV
v3: Split out the cdclk sanity check in vlv_set_cdclk() (Rodrigo)
v4: s/voltage/voltage_level/ (Rodrigo)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 24 Oct 2017 09:52:08 +0000 (12:52 +0300)]
drm/i915: Start tracking voltage level in the cdclk state
For CNL we'll need to start considering the port clocks when we select
the voltage level for the system agent. To that end start tracking the
voltage in the cdclk state (since that already has to adjust it).
v2: s/voltage/voltage_level/ (Rodrigo)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-3-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 24 Oct 2017 09:52:07 +0000 (12:52 +0300)]
drm/i915: Clean up some cdclk switch statements
Redo some switch statements in the cdclk code to use a common
fall through for the default case. Makes everything look a bit
more uniform
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-2-ville.syrjala@linux.intel.com
Anusha Srivatsa [Tue, 3 Oct 2017 17:59:48 +0000 (10:59 -0700)]
drm/i915/cnl: Update the DMC version on CNL
The latest version of DMC on CNL is 1.06.
Update the version so as to load the
latest firmware.
Release Notes:
Version: 1.06
1. DDI and AUX IO related fix.
v2: Improve the prefixes in commit message.
Add Release Notes directly. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507053588-677-1-git-send-email-anusha.srivatsa@intel.com
Rodrigo Vivi [Mon, 23 Oct 2017 22:46:12 +0000 (15:46 -0700)]
drm/i915/cnl: Get RC6 working.
On CNL, individual wake rate limit was added to each engine.
GT can only go to RC6 if both Render and Media engines are
individually qualified. So we need to set their individual
wake rate limit.
+-----------------+---------------+--------------+--------------+
| | GT RC6 | Render C6 | Media C6 |
+-----------------+---------------+--------------+--------------+
| Wake rate limit | 0xA09C[31:16] | 0xA09C[15:0] | 0xA0A0[15:0] |
+-----------------+---------------+--------------+--------------+
v2: - Tune Render and Media wake rate values according to some extra
info I got from HW engineers. Value can be tuned, but for now
these are the recommended values.
- Fix typos pointed by James.
Cc: Nathan Ciobanu <nathan.d.ciobanu@intel.com>
Cc: Wayne Boyer <wayne.boyer@intel.com>
Cc: Joe Konno <joe.konno@linux.intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023224612.27208-1-rodrigo.vivi@intel.com
Rodrigo Vivi [Mon, 23 Oct 2017 17:39:20 +0000 (10:39 -0700)]
drm/i915/cnl: Force DDI_A_4_LANES when needed.
As we faced in BXT, on CNL DDI_A_4_LANES is not
set as expected when system is boot with multiple
monitors connected. This result in wrong lane
setup impacting the max data rate available and
consequently blocking modeset on eDP, resulting
in a blank screen.
Most of CNL SKUs don't support DDI-E.
The only SKU that supports DDI-E is the same
that supports the full A/E split called DDI-F.
Also when DDI-F is used DDI-E cannot be used because
they share Interrupts. So DDI-E is almost useless.
Anyways let's consider this is possible and rely on
VBT for that.
This patch was initialy start by Clint, but required
many changes including full commit message. So
Credits entirely to Clint for finding this.
v2: Extract all messy conditions into a helper function
as suggested by Ville.
Along with simplification I removed the debug
message on the working case since now all conditions
are grouped.
v3: Split the conditions even more as suggested by Ville.
Get's cleaner and easier to add new cases in the
future.
Suggested-by: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023173920.22890-1-rodrigo.vivi@intel.com
Lionel Landwerlin [Tue, 24 Oct 2017 15:27:28 +0000 (16:27 +0100)]
drm/i915/perf: fix perf enable/disable ioctls with 32bits userspace
The compat callback was missing and triggered failures in 32bits
userspace when enabling/disable the perf stream. We don't require any
particular processing here as these ioctls don't take any argument.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: eec688e1420 ("drm/i915: Add i915 perf infrastructure")
Cc: linux-stable <stable@vger.kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024152728.4873-1-lionel.g.landwerlin@intel.com
Chris Wilson [Tue, 24 Oct 2017 11:55:01 +0000 (12:55 +0100)]
drm/i915/execlists: Remove the priority "optimisation"
Originally we set the priority to max upon inserting the request into
the execlists queue (and removing it from the scheduler lists). We could
then use the prio==INT_MAX as a shortcut within execlists_schedule() to
detect the end of the dependency chain. Since commit
1f181225f8ec
("drm/i915/execlists: Keep request->priority for its lifetime") this is
no longer true as we use the request completion as an indicator the
schedule dependency chain is complete instead. (This allows us to then
reschedule requests even when its context is in flight.) However, this
makes the GEM_BUG_ON() inside execlists_schedule() racy as we may change
the rq->prio at the same time. As the assertion is useful, let's keep
the assertion and remove the micro-optimisation.
Fixes: 1f181225f8ec ("drm/i915/execlists: Keep request->priority for its lifetime")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024115501.21033-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Chris Wilson [Mon, 23 Oct 2017 21:32:36 +0000 (22:32 +0100)]
drm/i915: Filter out spurious execlists context-switch interrupts
Back in commit
a4b2b01523a8 ("drm/i915: Don't mark an execlists
context-switch when idle") we noticed the presence of late
context-switch interrupts. We were able to filter those out by looking
at whether the ELSP remained active, but in commit
beecec901790
("drm/i915/execlists: Preemption!") that became problematic as we now
anticipate receiving a context-switch event for preemption while ELSP
may be empty. To restore the spurious interrupt suppression, add a
counter for the expected number of pending context-switches and skip if
we do not need to handle this interrupt to make forward progress.
v2: Don't forget to switch on for preempt.
v3: Reduce the counter to a on/off boolean tracker. Declare the HW as
active when we first submit, and idle after the final completion event
(with which we confirm the HW says it is idle), and track each source
of activity separately. With a finite number of sources, it should aide
us in debugging which gets stuck.
Fixes: beecec901790 ("drm/i915/execlists: Preemption!")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Mon, 23 Oct 2017 21:32:35 +0000 (22:32 +0100)]
drm/i915: Synchronize irq before parking each engine
When we park the engine (upon idling), we kill the irq tasklet. However,
to be sure that it is not restarted by a spurious interrupt after doing so,
flush the interrupt handler before parking. As we only park the engines
when we believe the system is idle, there should not be any interrupts to
distrub us; so flushing the final in-flight interrupt should be sufficient.
(However, we are still dependent on the HW behaving in an orderly and
timely fashion, which we shall endeavour to improve upon later.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Mon, 23 Oct 2017 21:32:34 +0000 (22:32 +0100)]
drm/i915: Bump wait-times for the final CS interrupt before parking
In the idle worker we drop the prolonged GT wakeref used to cover such
essentials as interrupt delivery. (When a CS interrupt arrives, we also
assert that the GT is awake.) However, it turns out that 10ms is not
long enough to be assured that the last CS interrupt has been delivered,
so bump that to 200ms, and move the entirety of that wait to before we
take the struct_mutex to avoid blocking. As this is now a potentially
long wait, restore the earlier behaviour of bailing out early when a new
request arrives.
v2: Break out the repeated check for new requests into its own little
helper to try and improve the self-commentary.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-1-chris@chris-wilson.co.uk
Jani Nikula [Mon, 23 Oct 2017 08:55:13 +0000 (11:55 +0300)]
drm/i915: Update DRIVER_DATE to
20171023
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rodrigo Vivi [Fri, 20 Oct 2017 17:26:41 +0000 (10:26 -0700)]
drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.
Starting on CNL we now need to map VBT DDC Pin to
BSPec DDC Pin values. Not a direct translation anymore.
According to VBT
Block 2 (General Bytes Definition)
DDC Bus
+----------+-----------+--------------------+
| DDI Type | VBT Value | Bspec Mapped Value |
+----------+-----------+--------------------+
| DDI-B | 0x1 | 0x1 |
| DDI-C | 0x2 | 0x2 |
| DDI-D | 0x3 | 0x4 |
| DDI-F | 0x4 | 0x3 |
+----------+-----------+--------------------+
v2: Move defines to a better place.
This is actually CNL_PCH not CNL only.
v3: Accepting Ville's suggestions: enums and array to
to make this future proof.
v4: Protect the array access as Ville suggested.
Also accepting all Jani's suggestions:
- use already defined gmbus pin definitions.
- use map_ddc_pin for disambiguation.
- Add /* sic */ comment on inverted values
so people can easily see it it nos a mistake
we have the map 3 -> 4 and 4 -> 3 :/
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171020172641.16029-1-rodrigo.vivi@intel.com
Rodrigo Vivi [Wed, 18 Oct 2017 19:54:06 +0000 (12:54 -0700)]
drm/i915: Let's use more enum intel_dpll_id pll_id.
No functional change expected. Just let's use this enum
when possible and also same standard pll_id name
so we can rework gen9+ port clock later.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171018195407.8618-1-rodrigo.vivi@intel.com
Madhav Chauhan [Fri, 13 Oct 2017 12:45:00 +0000 (18:15 +0530)]
drm/i915: Use existing DSI backlight ports info
This patch re-use already parsed DSI backlight/cabc ports
info for saving it inside struct intel_dsi rather than
parsing it at the time of DSI initialization.
V2: Remove backlight and cabc variable initialization (Jani N).
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507898700-20016-2-git-send-email-madhav.chauhan@intel.com
Madhav Chauhan [Fri, 13 Oct 2017 12:44:59 +0000 (18:14 +0530)]
drm/i915: Parse DSI backlight/cabc ports.
This patch parse DSI backlight/cabc ports info from
VBT and save them inside local structure. This saved info
can be directly used while initializing DSI for different
platforms instead of parsing for each platform.
V2: Changes:
- Typo fix in commit message.
- Move up newly added port variables (Jani N)
- Remove redundant initialization (Jani N)
- Don't parse CABC ports if not supported (Jani N)
V3: Patch restructure (Suggested by Jani N)
Credits-to: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507898700-20016-1-git-send-email-madhav.chauhan@intel.com
Chris Wilson [Thu, 19 Oct 2017 06:37:33 +0000 (07:37 +0100)]
drm/i915: Skip waking the device to service pwrite
If the device is in runtime suspend, resuming takes time and reduces our
powersaving. If this was for a small write into an object, that resume
will take longer than any savings in using the indirect GGTT access to
avoid the cpu cache.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019063733.31620-1-chris@chris-wilson.co.uk
Jani Nikula [Tue, 17 Oct 2017 14:03:13 +0000 (17:03 +0300)]
drm/i915/crt: split compute_config hook by platforms
Only the DDI hook has some actual content.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017140313.20937-1-jani.nikula@intel.com
Jani Nikula [Tue, 17 Oct 2017 14:02:34 +0000 (17:02 +0300)]
drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr
They're unused and unsupported. Leave the reduced_clock pointers in
place still, should they prove useful later on.
v2: go from nuking DDI lowfreq_avail to nuking it entirely (Ville)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017140234.20677-1-jani.nikula@intel.com
Ville Syrjälä [Wed, 18 Oct 2017 18:19:58 +0000 (21:19 +0300)]
drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables
A bunch of functions are now exclusively used for HDMI, so naming the
variables with hdmi prefix/suffix is redundant. Also use int rather
than u32 for the translation level consistently.
v2: Rebase due to hdmi_level=-1 avoidance
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171018181958.4423-1-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Ville Syrjälä [Wed, 18 Oct 2017 18:19:34 +0000 (21:19 +0300)]
drm/i915: Unify error handling for missing DDI buf trans tables
Handle missing buf trans tables, or out of bounds buf trans levels
the same way everywhere. These should never be hit under normal
conditions, but let's play it safe for now.
v2: Avoid the hdmi_level=-1 case (James)
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171018181934.4229-1-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Ville Syrjälä [Mon, 16 Oct 2017 14:57:03 +0000 (17:57 +0300)]
drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling
SKL DDI B/C/D only have 9 usable buf trans registers for DP/eDP. That
matches the normal DP buf trans tables, but the low vswing eDP tables
have 10 entries. Thus the eDP tables can only be used safely with DDI A
and E.
We try to catch cases where DDI B/C/D gets used with the wrong number of
entires in some parts of the code, but not everywhere. Let's move the
code to deal with that deeper into intel_ddi_get_buf_trans_edp(). And
for sake of symmetry do the same in intel_ddi_get_buf_trans_dp(). That
would also avoid explosions in the rather unlikely case that the DP
tables would get revised to 10 entries as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-9-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Ville Syrjälä [Mon, 16 Oct 2017 14:57:02 +0000 (17:57 +0300)]
drm/i915: Kill off the BXT buf_trans default_index
default_index contained in the BXT buf_trans tables is actually useless.
For DP we should always have a valid level selected (otherwise the link
training logic would be buggy), and for HDMI we can just do what the
other platforms do and pick the correct entry in intel_ddi_hdmi_level().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-8-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Ville Syrjälä [Mon, 16 Oct 2017 14:57:01 +0000 (17:57 +0300)]
drm/i915: Pass encoder type to cnl_ddi_vswing_sequence() explicitly
encoder->type is unreliable for DP/HDMI, so pass it in explicity into
cnl_ddi_vswing_sequence(). This matches what we do for BXT.
v2: Pass intel_encoder down to cnl_ddi_vswing_program(), and
clean up the argument types while at it
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-7-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Ville Syrjälä [Mon, 16 Oct 2017 14:57:00 +0000 (17:57 +0300)]
drm/i915: Integrate BXT into intel_ddi_dp_voltage_max()
Make BXT less special by following the CNL approach and handling
it in intel_ddi_dp_voltage_max() alognside every other DDI platform.
v2: Clean up the argument types to bxt_ddi_vswing_sequence() while at it
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-6-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Ville Syrjälä [Mon, 16 Oct 2017 14:56:59 +0000 (17:56 +0300)]
drm/i915: Pass the level to intel_prepare_hdmi_ddi_buffers()
The caller of intel_prepare_hdmi_ddi_buffers() alreday figured out the
level, so let's just pass it in instead if figuring it out again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-5-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Ville Syrjälä [Mon, 16 Oct 2017 14:56:58 +0000 (17:56 +0300)]
drm/i915: Pass the encoder type explicitly to skl_set_iboost()
encoder->type isn't reliable for DP/HDMI encoders, so pass the type
explicity to skl_set_iboost(). Also take the opportunity to streamline
the code.
v2: Clean up the argument types to skl_ddi_set_iboost() while at it
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-4-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Ville Syrjälä [Mon, 16 Oct 2017 14:56:57 +0000 (17:56 +0300)]
drm/i915: Extract intel_ddi_get_buf_trans_hdmi()
Introduce intel_ddi_get_buf_trans_hdmi() and start using it where we
can.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-3-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Ville Syrjälä [Mon, 16 Oct 2017 14:56:56 +0000 (17:56 +0300)]
drm/i915: Relocate intel_ddi_get_buf_trans_*() functions
We'll want to use the intel_ddi_get_buf_trans_*() functions a bit
earlier in the file, so move them up. While at it start using them
in the iboost setup to get rid of the platform checks there.
v2: Rebase due to BDW FDI buf trans fix
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-2-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Chris Wilson [Wed, 18 Oct 2017 12:16:21 +0000 (13:16 +0100)]
drm/i915: Flush the idle-worker for debugfs/i915_drop_caches
After being requested to idle the GPU, flush the idle worker to drop the
residual active state, and any internal object caches.
v2: By popular demand, introduce DROP_IDLE for fine-grained control from
userspace, though it should be used as part of a
DROP_ACTIVE | DROP_RETIRE | DROP_IDLE | DROP_FREED
sequence.
v3: Convert to BIT() to sell it to Joonas.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102655
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171018121621.10824-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Juha-Pekka Heikkila [Tue, 17 Oct 2017 20:08:11 +0000 (23:08 +0300)]
drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y
This is to use clipped y coordinate here. I left get_crtc_fence_y_offset()
function itself in place as oneliner to maintain comment above it why this
is done.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508270891-22186-6-git-send-email-juhapekka.heikkila@gmail.com
Juha-Pekka Heikkila [Tue, 17 Oct 2017 20:08:10 +0000 (23:08 +0300)]
drm/i915: Unify skylake plane disable
Don't handle skylake primary plane separately as it is similar
plane as the others.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508270891-22186-5-git-send-email-juhapekka.heikkila@gmail.com
Juha-Pekka Heikkila [Tue, 17 Oct 2017 20:08:09 +0000 (23:08 +0300)]
drm/i915: Unify skylake plane update
Don't handle skylake primary plane separately as it is similar
plane as the others.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508270891-22186-4-git-send-email-juhapekka.heikkila@gmail.com
Juha-Pekka Heikkila [Tue, 17 Oct 2017 20:08:08 +0000 (23:08 +0300)]
drm/i915: dspaddr_offset doesn't need to be more than local variable
Move u32 dspaddr_offset from struct intel_crtc member into local
variable in i9xx_update_primary_plane()
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508270891-22186-3-git-send-email-juhapekka.heikkila@gmail.com
Juha-Pekka Heikkila [Tue, 17 Oct 2017 20:08:07 +0000 (23:08 +0300)]
drm/i915: move adjusted_x/y from crtc to cache.
Move adjusted_x/y from crtc to fbc cache.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508270891-22186-2-git-send-email-juhapekka.heikkila@gmail.com
[vsyrjala: Add rudimentary commit message]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Kees Cook [Tue, 17 Oct 2017 06:53:04 +0000 (09:53 +0300)]
drm/i915: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017065304.3358-1-joonas.lahtinen@linux.intel.com
Harsha Sharma [Sat, 14 Oct 2017 18:36:44 +0000 (00:06 +0530)]
drm/i915: Replace *_reference/unreference() or *_ref/unref with _get/put()
Replace instances of drm_framebuffer_reference/unreference() with
*_get/put() suffixes and drm_dev_unref with *_put() suffix
because get/put is shorter and consistent with the
kernel use of *_get/put suffixes.
Done with following coccinelle semantic patch
@@
expression ex;
@@
(
-drm_framebuffer_unreference(ex);
+drm_framebuffer_put(ex);
|
-drm_dev_unref(ex);
+drm_dev_put(ex);
|
-drm_framebuffer_reference(ex);
+drm_framebuffer_get(ex);
)
Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014183644.21990-1-harshasharmaiitr@gmail.com
Jani Nikula [Wed, 18 Oct 2017 09:37:31 +0000 (12:37 +0300)]
Merge drm-upstream/drm-next into drm-intel-next-queued
Needed for timer_setup() and drm_dev_{get,put}() conversions in i915.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tvrtko Ursulin [Tue, 17 Oct 2017 15:09:08 +0000 (16:09 +0100)]
drm/i915: Fixup userptr mmu notifier registration error handling
Avoid dereferencing the error pointer and also avoid returning NULL
from i915_mmu_notifier_find since the callers do not expect that.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 7741b547b6e0 ("drm/i915: Preallocate our mmu notifier workequeu to unbreak cpu hotplug deadlock")
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017150908.12840-1-tvrtko.ursulin@linux.intel.com
Oscar Mateo [Tue, 17 Oct 2017 20:25:45 +0000 (13:25 -0700)]
drm/i915: Use a mask when applying WaProgramL3SqcReg1Default
Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important
(although we probably aren't at the moment because 0 seems to be the default
for all the other bits).
v2: Extra parentheses (Michel)
Fixes: 050fc46 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf")
Fixes: 450174f ("drm/i915/chv: Tune L3 SQC credits based on actual latencies")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508271945-14961-1-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Oscar Mateo [Tue, 17 Oct 2017 20:27:51 +0000 (13:27 -0700)]
drm/i915: No need for RING_MAX_NONPRIV_SLOTS space
Now that we write RING_FORCE_TO_NONPRIV registers directly to hardware,
[commit
32ced39 ("drm/i915: Transform whitelisting WAs into a simple reg
write")] there is no need to save space for them in the list of context
workarounds.
v2: Refer to previous commit in commit message (Michel)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508272071-15125-1-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Michal Wajdeczko [Tue, 17 Oct 2017 09:44:49 +0000 (09:44 +0000)]
drm/i915/uc: Add pretty printer for uc firmware
Debugfs for GuC and HuC load info have similar common part.
Move and update dump of uc_fw to separate helper for reuse.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017094449.22584-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
James Ausmus [Fri, 13 Oct 2017 18:01:44 +0000 (11:01 -0700)]
drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector
Make intel_dp_add_mst_connector handle error returns from the drm_ calls.
Add intel_connector_free to support cleanup on the error path.
v2: Rename new function to avoid confusion, and simplify error
paths (Ville)
v3: Indentation fixup, style fixes (Ville)
v4: Clarify usage of intel_connector_free, and fix usage of
intel_connector_free
v5: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013180144.15865-1-james.ausmus@intel.com
Chris Wilson [Tue, 17 Oct 2017 10:37:23 +0000 (11:37 +0100)]
drm/i915/selftests: Silence the compiler for impossible errors
It should be impossible for these tests not to run due to an empty
ppgtt, but if it should happen, let's report ENODEV (our typical
internal error for impossible events).
In file included from drivers/gpu/drm/i915/i915_gem.c:5415:
drivers/gpu/drm/i915/selftests/huge_pages.c: In function 'igt_mock_ppgtt_huge_fill':
>> drivers/gpu/drm/i915/selftests/huge_pages.c:612: error: 'err' may be used uninitialized in this function
drivers/gpu/drm/i915/selftests/huge_pages.c: In function 'igt_ppgtt_exhaust_huge':
drivers/gpu/drm/i915/selftests/huge_pages.c:1159: error: 'err' may be used uninitialized in this function
Reported-by: kbuild-all@01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017103723.6933-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Chris Wilson [Mon, 16 Oct 2017 20:27:32 +0000 (21:27 +0100)]
drm/i915: Report -EFAULT before pwrite fast path into shmemfs
When pwriting into shmemfs, the fast path pagecache_write does not
notice when it is writing to beyond the end of the truncated shmemfs
inode. Report -EFAULT directly when we try to use pwrite into the
!I915_MADV_WILLNEED object.
Fixes: 7c55e2c5772d ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl")
Testcase: igt/gem_madvise/dontneed-before-pwrite
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk
Ville Syrjälä [Fri, 13 Oct 2017 19:40:51 +0000 (22:40 +0300)]
drm/i915: Remove mostly duplicated video DIP handling from PSR code
Now that the infoframe hooks are part of the intel_dig_port, we can use
the normal .write_infoframe() hook to update the VSC SDP. We do need to
deal with the size difference between the VSC DIP and the others though.
Another minor snag is that the compiler will complain to use if we keep
using enum hdmi_infoframe_type type and passing in the DP define instead,
so et's just change to unsigned int all over for the inforframe type.
v2: Rebase due to other PSR changes
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013194051.19286-1-ville.syrjala@linux.intel.com
Dave Airlie [Thu, 12 Oct 2017 23:52:01 +0000 (00:52 +0100)]
drm/plane: drop num_overlay_planes (v3)
In order to implement plane leasing we need to count things,
just make the code consistent with the counting code currently
used for counting crtcs/encoders/connectors and drop the need
for num_overlay_planes.
v2: don't forget to assign plane_ptr. (keithp)
v3: use correct bounds check, found by igt.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 17 Oct 2017 00:13:47 +0000 (10:13 +1000)]
Merge tag 'tilcdc-4.15' of https://github.com/jsarha/linux into drm-next
tilcdc changes for v4.15
* tag 'tilcdc-4.15' of https://github.com/jsarha/linux:
drm/tilcdc: Remove redundant OF_DETACHED flag setting
drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode()
drm/tilcdc: Use tilcdc_crtc_shutdown() in tilcdc_crtc_destroy()
drm/tilcdc: Remove WARN_ON(!drm_modeset_is_locked(&crtc->mutex)) checks
drm/tilcdc: Turn raster off in crtc reset, if it was on in the HW
drm/tilcdc: switch to drm_*{get,put} helpers
drm/tilcdc: tilcdc_tfp410: make of_device_ids const.
drm/tilcdc: tilcdc_panel: make of_device_ids const.
Dave Airlie [Tue, 17 Oct 2017 00:10:17 +0000 (10:10 +1000)]
Merge tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Quick 4.15 misc pull for the build fix:
Cross-subsystem Changes:
- piles an piles of misc/trivial patches all over, some more from
outreachy applicants
Core Changes:
- build fix for the bridge/of cleanup (Maarten)
- fix vblank count in arm_vblank_event (Ville)
- some kerneldoc typo fixes from Thierry
Driver Changes:
- vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt)
- sun4i: small cleanups and improved code comments all over (Chen-Yu
Tsai)
* tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits)
drm/via: use ARRAY_SIZE
drm/gma500: use ARRAY_SIZE
drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function
drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits
drm/sun4i: backend: Add comment explaining why registers are cleared
drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory
drm/sun4i: backend: Create regmap after access is possible
drm/sun4i: don't add components that are already in the queue
drm/vc4: Fix pitch setup for T-format scanout.
drm/vc4: Move the DSI clock divider workaround closer to the clock call.
drm: Replace kzalloc with kcalloc
drm/tinydrm: Remove explicit .best_encoder assignment
drm/tinydrm: Replace dev_error with DRM_DEV_ERROR
drm/drm_of: Move drm_of_panel_bridge_remove_function into header.
drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()
drm/atomic-helper: Fix typo
drm: Add missing __user annotation to drm_syncobj_array_find()
drm/rockchip: add PINCTRL dependency for LVDS
drm/kirin: Checking for IS_ERR() instead of NULL
driver:gpu: return -ENOMEM on allocation failure.
...
Rodrigo Vivi [Tue, 3 Oct 2017 22:08:59 +0000 (15:08 -0700)]
drm/i915/cnl: Fix PLL initialization for HDMI.
HDMI Mode selection on CNL is on CFGCR0 for that PLL, not
on in a global CTRL1 as it was on SKL.
The original patch addressed this difference, but leaving behind
this single entry here. So we were checking the wrong bits during
the PLL initialization and consequently avoiding the CFGCR1 setup
during HDMI initialization. Luckly when only HDMI was in use BIOS
had already setup this for us. But the dual display with hot plug
were messed up.
Fixes: a927c927de34 ("drm/i915/cnl: Initialize PLLs")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-3-rodrigo.vivi@intel.com
Rodrigo Vivi [Tue, 3 Oct 2017 22:08:58 +0000 (15:08 -0700)]
drm/i915/cnl: Fix PLL mapping.
On PLL Enable sequence we need to "Configure DPCLKA_CFGCR0 to turn on
the clock for the DDI and map the DPLL to the DDI"
So we first do the map and then we unset DDI_CLK_OFF to turn the clock
on. We do this in 2 separated steps.
However, on this second step where we should only unset the off bit we are
also unmapping the ddi from the pll. So we end up using the pll 0
for almost everything. Consequently breaking cases with more than one
display.
Fixes: 555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-2-rodrigo.vivi@intel.com
Chris Wilson [Sun, 15 Oct 2017 20:43:10 +0000 (21:43 +0100)]
drm/i915: Add in-flight request details to intel_engine_dump()
In the intel_engine_cs dumper, we were showing the request details for
the request queue but not of those requests already passed to the hw
(just a summary of the seqno). If we show those details, we can then
eliminate the entirely redundant and forgotten debugfs/i915_gem_request
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171015204310.17045-1-chris@chris-wilson.co.uk
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Chris Wilson [Sun, 15 Oct 2017 14:37:25 +0000 (15:37 +0100)]
drm/i915: Skip HW reinitialisation on resume if still wedged
If we fail to recover the HW state upon resume (i.e. our attempt to
clear the wedged bit and reset during i915_gem_sanitize() fails), then
skip the HW restart inside i915_gem_init_hw(). We will ultimately do the
HW restart when successfully unwedging and resetting the HW later,
but attempting to restore a wedged device upon resume is risky as the HW
is in an unknown state.
v2: Suppress the error message when detecting the already wedged HW.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103240
Testcase: igt/gem_eio/in-flight-suspend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171015143725.27764-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Fri, 13 Oct 2017 20:26:21 +0000 (21:26 +0100)]
drm/i915: Trim struct_mutex hold duration for i915_gem_free_objects
We free objects in bulk after they wait for their RCU grace period.
Currently, we take struct_mutex and unbind all the objects. This can lead
to a long lock duration during which time those objects have their pages
unfreeable (i.e. the shrinker is prevented from reaping those pages). If
we only process a single object under the struct_mutex and then free the
pages, the number of objects locked away from the shrinker is minimal
and we allow regular clients better access to struct_mutex if they need
it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-9-chris@chris-wilson.co.uk
Chris Wilson [Fri, 13 Oct 2017 20:26:20 +0000 (21:26 +0100)]
drm/i915: Only free the oldest stale object before a fresh allocation
Inspired by Tvrtko's critique of the reaping of the stale contexts
before allocating a new one, also limit the freed object reaping to the
oldest stale object before allocating a fresh object. Unlike contexts,
objects may have radically different sizes of backing storage, but
similar to contexts, while we want to prevent starvation due to
excessive freed lists, we also do not want to delay fresh allocations
for too long. Only freeing the oldest on the freed object list before
each allocation is a reasonable compromise.
v2: Only a single consumer of llist_del_first() is allowed (although
multiple llist_add are still allowed in parallel). Unlike
i915_gem_context, i915_gem_flush_free_objects() is itself not serialized
and so we need to add our own spinlock. Otherwise KASAN eventually spots
a use-after-free for the race on *first->next.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-8-chris@chris-wilson.co.uk
projects / openwrt / staging / blogic.git / log