Imre Kaloz [Sun, 11 Nov 2012 21:04:30 +0000 (21:04 +0000)]
add support for the Tonze AP-422/425
SVN-Revision: 34165
Imre Kaloz [Sun, 11 Nov 2012 21:03:52 +0000 (21:03 +0000)]
refresh patch
SVN-Revision: 34164
Imre Kaloz [Sun, 11 Nov 2012 20:57:04 +0000 (20:57 +0000)]
generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot
SVN-Revision: 34163
Luka Perkov [Sun, 11 Nov 2012 20:03:58 +0000 (20:03 +0000)]
cns3xxx: convert dwc_otg patches to files
SVN-Revision: 34162
Luka Perkov [Sun, 11 Nov 2012 20:03:56 +0000 (20:03 +0000)]
cns3xxx: convert ethernet patches to files
SVN-Revision: 34161
Jonas Gorski [Sun, 11 Nov 2012 19:57:17 +0000 (19:57 +0000)]
bcm63xx: switch to 3.6.6
SVN-Revision: 34160
Jonas Gorski [Sun, 11 Nov 2012 19:42:35 +0000 (19:42 +0000)]
kernel: modules: ext4 depends on crypto-hash on 3.6
SVN-Revision: 34159
Imre Kaloz [Sun, 11 Nov 2012 19:29:27 +0000 (19:29 +0000)]
move fixed mapping of internal devices into vmalloc region
SVN-Revision: 34158
Florian Fainelli [Sun, 11 Nov 2012 19:26:54 +0000 (19:26 +0000)]
advertise squashfs feature
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34157
Florian Fainelli [Sun, 11 Nov 2012 19:26:50 +0000 (19:26 +0000)]
add support for Linux 3.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34156
Florian Fainelli [Sun, 11 Nov 2012 19:26:44 +0000 (19:26 +0000)]
split kernel config between generic, au1500 and au1550
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34155
Florian Fainelli [Sun, 11 Nov 2012 18:41:09 +0000 (18:41 +0000)]
add support for Linux 3.6
SVN-Revision: 34154
Florian Fainelli [Sun, 11 Nov 2012 18:40:48 +0000 (18:40 +0000)]
move files directory to files-3.3
SVN-Revision: 34153
Florian Fainelli [Sun, 11 Nov 2012 18:40:43 +0000 (18:40 +0000)]
i2c-gpio-mux: fix build for 3.6+ kernels
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34152
Hauke Mehrtens [Sun, 11 Nov 2012 17:30:33 +0000 (17:30 +0000)]
brcm47xx: remove ssb-gige package
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.
SVN-Revision: 34150
Florian Fainelli [Sun, 11 Nov 2012 16:11:39 +0000 (16:11 +0000)]
generate image for AC49x
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34149
Florian Fainelli [Sun, 11 Nov 2012 16:11:34 +0000 (16:11 +0000)]
create AC49x subtarget
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34148
Florian Fainelli [Sun, 11 Nov 2012 16:11:29 +0000 (16:11 +0000)]
create generic subtarget
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34147
Florian Fainelli [Sun, 11 Nov 2012 16:11:22 +0000 (16:11 +0000)]
detect AC49x flash partitions
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34146
Florian Fainelli [Sun, 11 Nov 2012 16:11:14 +0000 (16:11 +0000)]
support AC49x bootloader environment
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34145
Florian Fainelli [Sun, 11 Nov 2012 16:11:09 +0000 (16:11 +0000)]
add AudioCodes AC49x platform support to kernel
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34144
Florian Fainelli [Sun, 11 Nov 2012 16:11:00 +0000 (16:11 +0000)]
free memory below kernel offset
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34143
Florian Fainelli [Sun, 11 Nov 2012 16:10:50 +0000 (16:10 +0000)]
uClibc: backport a fix for dlsym(RTLD_NEXT, ...) use
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34142
Imre Kaloz [Sun, 11 Nov 2012 11:07:59 +0000 (11:07 +0000)]
fix machtype handling above 4096
SVN-Revision: 34141
Jo-Philipp Wich [Sat, 10 Nov 2012 23:28:58 +0000 (23:28 +0000)]
x86/generic: don't disable usbfs (#12452)
SVN-Revision: 34139
Jonas Gorski [Sat, 10 Nov 2012 22:10:47 +0000 (22:10 +0000)]
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34138
Jonas Gorski [Sat, 10 Nov 2012 19:59:16 +0000 (19:59 +0000)]
bcm63xx: add two missing usb patches to 3.6
SVN-Revision: 34137
Jonas Gorski [Sat, 10 Nov 2012 19:59:07 +0000 (19:59 +0000)]
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
SVN-Revision: 34136
Felix Fietkau [Sat, 10 Nov 2012 02:47:33 +0000 (02:47 +0000)]
mac80211: add more tx skb free fixes (hopefully final fix to #11894)
SVN-Revision: 34133
Imre Kaloz [Fri, 9 Nov 2012 21:37:54 +0000 (21:37 +0000)]
cns3xxx: clean up pcie patches
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34132
John Crispin [Fri, 9 Nov 2012 19:26:58 +0000 (19:26 +0000)]
add more profiles
SVN-Revision: 34131
John Crispin [Fri, 9 Nov 2012 19:26:43 +0000 (19:26 +0000)]
a few more dts files (WIP)
SVN-Revision: 34130
John Crispin [Fri, 9 Nov 2012 19:26:30 +0000 (19:26 +0000)]
add mtd split and atm patch
SVN-Revision: 34129
Felix Fietkau [Fri, 9 Nov 2012 10:53:36 +0000 (10:53 +0000)]
x86: use $(strip) for the at_keyboard check
SVN-Revision: 34127
Felix Fietkau [Fri, 9 Nov 2012 10:19:51 +0000 (10:19 +0000)]
x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell)
SVN-Revision: 34126
Gabor Juhos [Fri, 9 Nov 2012 09:07:29 +0000 (09:07 +0000)]
generic: sanitize deps_initramfs list
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:
/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop.
make[5]: *** [usr] Error 2
Fix it by removing such filenames from the
deps_initramfs list.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34125
Felix Fietkau [Thu, 8 Nov 2012 15:08:31 +0000 (15:08 +0000)]
build: remove remaining references to TOOLCHAIN_JOBS (thx, Sedat Dilek)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 34122
Luka Perkov [Thu, 8 Nov 2012 11:31:56 +0000 (11:31 +0000)]
cns3xxx: exit from laguna late_initcall if not running on laguna board
SVN-Revision: 34120
Jo-Philipp Wich [Thu, 8 Nov 2012 11:22:09 +0000 (11:22 +0000)]
scripts: fix remote-gdb script to cope with _eabi suffix in uClibc version
SVN-Revision: 34118
Jo-Philipp Wich [Thu, 8 Nov 2012 10:48:08 +0000 (10:48 +0000)]
resolveip: fix endless getopt() loop when compiled for arm (#12290)
SVN-Revision: 34116
Imre Kaloz [Thu, 8 Nov 2012 05:42:31 +0000 (05:42 +0000)]
cns3xxx: add PPS support for laguna
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support. This patch adds kernel support (statically) and adds
the platform data in laguna board support.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34115
Imre Kaloz [Thu, 8 Nov 2012 05:40:34 +0000 (05:40 +0000)]
fixup symbol selection
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI
SVN-Revision: 34114
Luka Perkov [Wed, 7 Nov 2012 23:12:06 +0000 (23:12 +0000)]
cns3xxx: fix coding style in board script
SVN-Revision: 34113
John Crispin [Wed, 7 Nov 2012 20:26:31 +0000 (20:26 +0000)]
adds fon20n profile
SVN-Revision: 34112
John Crispin [Wed, 7 Nov 2012 20:26:21 +0000 (20:26 +0000)]
ramips: use kernel 3.6.6
## Booting image at
80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size:
3560768 Bytes = 3.4 MB
Load Address:
80000000
Entry Point:
80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address
80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4
20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is:
0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory:
02000000 @
00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=
0000c388
[ 0.000000] Readback ErrCtl register=
0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=
1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device:
00800000 at
bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release:
compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (
2402000 KHz -
2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (
2457000 KHz -
2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (
2474000 KHz -
2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (
5170000 KHz -
5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (
5735000 KHz -
5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
SVN-Revision: 34111
John Crispin [Wed, 7 Nov 2012 20:26:04 +0000 (20:26 +0000)]
ramips: add HAVE_CLK to Kconfig on all ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 34110
John Crispin [Wed, 7 Nov 2012 20:25:55 +0000 (20:25 +0000)]
ramips: add linux-3.6 configuration for ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/rt288x/config-3.6
create mode 100644 target/linux/ramips/rt305x/config-3.6
create mode 100644 target/linux/ramips/rt3883/config-3.6
SVN-Revision: 34109
John Crispin [Wed, 7 Nov 2012 20:25:34 +0000 (20:25 +0000)]
ramips: port patches to linux-3.6
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch
SVN-Revision: 34108
John Crispin [Wed, 7 Nov 2012 19:36:56 +0000 (19:36 +0000)]
Load schedule modules
They were missing the AUTOLOAD directive.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 34107
Jo-Philipp Wich [Wed, 7 Nov 2012 16:15:22 +0000 (16:15 +0000)]
buildroot: isolate the .install stamp files for build variants (#12279)
This fixes missing embedded packages if multiple build variants are selected in
the build config, e.g. missing ppp if CONFIG_PACKAGE_ppp=y and
CONFIG_PACKAGE_ppp-multilink=m .
SVN-Revision: 34106
Jonas Gorski [Wed, 7 Nov 2012 09:01:03 +0000 (09:01 +0000)]
bcm63xx: Enable endian check support for ath9k pci fixup.
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34105
Imre Kaloz [Wed, 7 Nov 2012 07:51:24 +0000 (07:51 +0000)]
fixup typos in the compex patch
SVN-Revision: 34104
Jonas Gorski [Tue, 6 Nov 2012 15:21:46 +0000 (15:21 +0000)]
linux: export bcm963xx_tag.h to userspace
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 34103
Luka Perkov [Tue, 6 Nov 2012 11:16:43 +0000 (11:16 +0000)]
cns3xxx: refresh kernel config file
SVN-Revision: 34102
Luka Perkov [Tue, 6 Nov 2012 11:16:41 +0000 (11:16 +0000)]
cns3xxx: use files directory
SVN-Revision: 34101
John Crispin [Tue, 6 Nov 2012 10:39:43 +0000 (10:39 +0000)]
add OWRTDTB marker patch
SVN-Revision: 34100
John Crispin [Tue, 6 Nov 2012 07:43:08 +0000 (07:43 +0000)]
remove bogus file
SVN-Revision: 34099
John Crispin [Tue, 6 Nov 2012 07:41:44 +0000 (07:41 +0000)]
unbreak ltq-dsl-fw
SVN-Revision: 34098
John Crispin [Tue, 6 Nov 2012 07:38:24 +0000 (07:38 +0000)]
add support for arv7525
SVN-Revision: 34097
John Crispin [Tue, 6 Nov 2012 07:38:18 +0000 (07:38 +0000)]
prepare dsl driver for 3.6 and split fw into a seperate package
SVN-Revision: 34096
Imre Kaloz [Tue, 6 Nov 2012 05:45:12 +0000 (05:45 +0000)]
refresh patches
SVN-Revision: 34095
Imre Kaloz [Tue, 6 Nov 2012 05:39:08 +0000 (05:39 +0000)]
add default packages
SVN-Revision: 34094
Jonas Gorski [Tue, 6 Nov 2012 00:48:21 +0000 (00:48 +0000)]
linux: generic: fix split_squashfs for 3.6
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.
SVN-Revision: 34093
Jonas Gorski [Mon, 5 Nov 2012 22:50:29 +0000 (22:50 +0000)]
bcm63xx: fix SPW303V images
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
SVN-Revision: 34091
Jo-Philipp Wich [Mon, 5 Nov 2012 19:28:24 +0000 (19:28 +0000)]
netifd: don't send a default client identifier in DHCP requests if no clientid uci option is given (#12426)
SVN-Revision: 34089
Gabor Juhos [Mon, 5 Nov 2012 13:23:28 +0000 (13:23 +0000)]
ar71xx: nuke ath79_set_usb_power_gpio helper
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34088
Gabor Juhos [Mon, 5 Nov 2012 13:23:27 +0000 (13:23 +0000)]
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34087
Gabor Juhos [Mon, 5 Nov 2012 13:22:09 +0000 (13:22 +0000)]
kernel: update linux 3.6 to 3.6.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34086
Imre Kaloz [Mon, 5 Nov 2012 11:38:23 +0000 (11:38 +0000)]
use the mainline machname for the compex boards
SVN-Revision: 34083
Gabor Juhos [Mon, 5 Nov 2012 11:04:45 +0000 (11:04 +0000)]
ramips: enable USB power on the DIR-645
Closes #12422.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34082
Gabor Juhos [Mon, 5 Nov 2012 11:04:43 +0000 (11:04 +0000)]
linux/3.3: backport an upstream GPIO patch
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().
This will be used by ar71xx/ramips platforms.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34081
Gabor Juhos [Mon, 5 Nov 2012 07:10:35 +0000 (07:10 +0000)]
Add ledtrig-oneshot module for 3.6 kernels
This patch adds a package for the ledtrig-oneshot module, available in
3.6 and later.
[juhosg: change dependency from LINUX_3_6 to !LINUX_3_3]
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
SVN-Revision: 34079
Gabor Juhos [Mon, 5 Nov 2012 06:58:53 +0000 (06:58 +0000)]
ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 34078
Gabor Juhos [Sun, 4 Nov 2012 22:08:54 +0000 (22:08 +0000)]
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34076
Gabor Juhos [Sun, 4 Nov 2012 21:12:20 +0000 (21:12 +0000)]
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34074
Gabor Juhos [Sun, 4 Nov 2012 20:15:18 +0000 (20:15 +0000)]
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34072
Felix Fietkau [Sun, 4 Nov 2012 17:01:30 +0000 (17:01 +0000)]
mtd: avoid adding the kernel dir to includes, use the toolchain headers
SVN-Revision: 34071
Felix Fietkau [Sun, 4 Nov 2012 17:01:27 +0000 (17:01 +0000)]
ppp: add more pppol2tpv3 related structs from the kernel headers to fix compile issues with linux 3.6
SVN-Revision: 34070
Felix Fietkau [Sun, 4 Nov 2012 17:01:23 +0000 (17:01 +0000)]
iptables: remove support for libipq, it has been obsolete for years and is unsupported in newer kernels
SVN-Revision: 34069
Felix Fietkau [Sun, 4 Nov 2012 17:01:15 +0000 (17:01 +0000)]
linux-3.6: fix portability of some includes files in tools/ used on the host
SVN-Revision: 34068
John Crispin [Sat, 3 Nov 2012 13:29:44 +0000 (13:29 +0000)]
3.6 is not the default yet
SVN-Revision: 34065
John Crispin [Fri, 2 Nov 2012 20:07:47 +0000 (20:07 +0000)]
adds dts files and make devicetree images buildable
SVN-Revision: 34064
John Crispin [Fri, 2 Nov 2012 20:07:41 +0000 (20:07 +0000)]
update ase target for 3.6
SVN-Revision: 34063
John Crispin [Fri, 2 Nov 2012 20:07:36 +0000 (20:07 +0000)]
add subtarget, as of 3.6 we dont seperate xway SoC
SVN-Revision: 34062
John Crispin [Fri, 2 Nov 2012 20:07:26 +0000 (20:07 +0000)]
adds 3.6 files, patches and config
SVN-Revision: 34061
John Crispin [Fri, 2 Nov 2012 20:07:02 +0000 (20:07 +0000)]
move files/ -> files-3.3/
SVN-Revision: 34060
John Crispin [Fri, 2 Nov 2012 20:06:51 +0000 (20:06 +0000)]
prepare Makefile for 3.6
SVN-Revision: 34059
John Crispin [Fri, 2 Nov 2012 20:06:45 +0000 (20:06 +0000)]
rename patch-cmdline and add code for patching DTB files into kernel images
SVN-Revision: 34058
Gabor Juhos [Thu, 1 Nov 2012 11:07:23 +0000 (11:07 +0000)]
generic: make yaffs work on 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34054
Gabor Juhos [Thu, 1 Nov 2012 11:07:16 +0000 (11:07 +0000)]
generic: rename jffs2 patches
Make room for the upcoming yaffs patches.
No functional changes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34053
Daniel Dickinson [Thu, 1 Nov 2012 07:15:49 +0000 (07:15 +0000)]
Fix feeds.conf.default when no SVN info present
SVN-Revision: 34051
Gabor Juhos [Wed, 31 Oct 2012 21:17:30 +0000 (21:17 +0000)]
generic: use mtd_* helpers in the yaffs code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34046
Imre Kaloz [Wed, 31 Oct 2012 20:16:53 +0000 (20:16 +0000)]
move PCIe init to subsys init call
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init
as it does not support hotplug. I have modeled the cns3xxx PCIe init after
other ARM platforms. Registering it early resolves resource issues occuring
during bus enumeration that occur when a device driver is linked static in
the kernel.
Instead of passing in a bitmask to enable the 2 available ports, link detect
is used to enable ports that have a valid link.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34044
Gabor Juhos [Wed, 31 Oct 2012 20:09:39 +0000 (20:09 +0000)]
kernel: update linux 3.6 to 3.6.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34042
Gabor Juhos [Wed, 31 Oct 2012 19:33:12 +0000 (19:33 +0000)]
generic: split yaffs-3.2-fix patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34041
Felix Fietkau [Wed, 31 Oct 2012 19:30:21 +0000 (19:30 +0000)]
libubox: add more uloop timer fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 34039
Felix Fietkau [Wed, 31 Oct 2012 19:06:46 +0000 (19:06 +0000)]
libubox: update to latest version, fixes a timer calculation issue in uloop
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 34037
Florian Fainelli [Wed, 31 Oct 2012 17:32:43 +0000 (17:32 +0000)]
eglibc: update to r21110
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34036
Florian Fainelli [Wed, 31 Oct 2012 17:32:37 +0000 (17:32 +0000)]
kernel-defaults: factor common code handling initramfs options
While at it, reindent so it is more in-line with the rest of the file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34034
Felix Fietkau [Wed, 31 Oct 2012 16:05:02 +0000 (16:05 +0000)]
libubox: pass the lua path to cmake to avoid build errors
SVN-Revision: 34033
projects / openwrt / staging / neocturne.git / log