staging: comedi: comedi_test: remove unnecessary del_timer() call

In the "comedi_test" module, the timer function
`waveform_ai_interrupt()` doesn't need to remove the timer from the
timer queue as the caller has already removed it from the queue.  Remove
the call to `del_timer()` in this function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: fix race when cancelling command

Éric Piel reported a kernel oops in the "comedi_test" module.  It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).

This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command.  In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.

Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: comedidev.h: fixed a camel case

Fixed a camel case issue.

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: store the 'index' for each subdevice

Store the 'index' for each comedi_subdevice when they are initially
allocated by comedi_alloc_subdevice(). This allows removing the
pointer math in comedi_fops.c which is used to figure out the
index that user space uses to access the individual subdevices.

Fix the ni_mio_common driver so it also uses the 'index' instead
of doing the pointer math.

Also, remove a couple unused macros in the pcmda12, pcmmio, and
pcmuio drivers which also do the pointer math to figure out the
index.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: use kzalloc in comedi_alloc_subdevice_minor()

The hardware_device member of comedi_file_info is not set in this
function. Use kzalloc to make sure this pointer does not contain
invalid data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: cleanup comedi_mmap()

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Change the (foo == NULL) tests to simply (!foo).

Use a local variable to hold a pointer to the async->buf_page_list[]
when doing the remap_pfn_range(). This cleans up the ugly line breaks
for the page_to_pfn(virt_to_page(...) operation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: cleanup comedi_{read, write}_subdevice()

Flip the info->device tests so than the return NULL occurs last.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: introduce comedi_is_subdevice_idle()

Introduce, and use, a helper to check the subdevice runflags to see if
it is not in error and not running.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: introduce comedi_is_subdevice_in_error()

Introduce, and use, a helper to check the subdevice runflags to see if
the SRF_ERROR flag is set.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: don't export comedi_get_subdevice_runflags()

The subdevice runflags are protected with a spin_lock. Only the comedi
core should be accessing them directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use comedi_is_subdevice_running()

Use the helper function comedi_is_subdevice_running() instead of getting
the subdevice runflags and then masking the result.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: introduce comedi_is_subdevice_running()

Introduce a helper function that checks the subdevice runflags to
see if the subdevice is running a command.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: move comedi_get_subdevice_runflags()

For aesthetic reasons, move this function so its near
comedi_set_subdevice_runflags().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: fix a number of sizeof(struct foo) forms

As mentioned in CodingStyle, the prefered form is:

p = kmalloc(sizeof(*p), ...);

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: move comedi_cleanup_legacy_minors()

This function is only called by the module_{init,exit} functions. For
aesthetic reasons, move it near them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: move the module_{init, exit} functions to EOF

For aesthetic reasons, move the module_{init,exit} functions to the end
of the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: move the MODULE_* information to EOF

For aesthetic reasons, move the MODULE_* information to the end of
the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: remove the goto's in comedi_write()

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Cleanup the sanity checking a bit and remove the need for the goto's
when returning an initial error condition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: remove the goto's in comedi_read()

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Cleanup the sanity checking a bit and remove the need for the goto's
when returning an initial error condition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: cleanup comedi_poll()

Consolidate the local variables 'read_subdev' and 'write_subdev' into a
single local variable 's'.

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Use a goto in the !dev->attached test so that the mutex_unlock() call
is in a common place.

Cleanup the formating of the || in the read and write subdevice poll
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: cleanup do_devinfo_ioctl()

Consolidate the local variables 'read_subdev' and 'write_subdev' into a
single local variable 's'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: rename comedi_{read,write}_subdevice()

The 'get' usually implies increasing a reference count of an object.
These function return a pointer but do not do any reference counting.
For aesthetic reasons, rename the functions to better represent what
they do.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: rename comedi_get_device_file_info()

The 'get' usually implies increasing a reference count of an object.
This function returns a pointer but does not do any reference counting.
For aesthetic reasons, rename the function to better represent what
its doing.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: rename struct comedi_device_file_info

For aesthetic reasons, rename this struct to comedi_file_info. It's
a bit shorter and allows fixing some of the ugly line breaks used
to keep the lines < 80 chars.

Also, consistently use the local variable name 'info' instead of the
longer 'dev_file_info' to also fix some ugly line breaks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't expose struct comedi_device_file_info

This structure is only used in comedi_fops.c as part of handling
the file operations and sysfs files. Remove it's defenition from
comedidev.h so it's not exposed to the comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: don't export comedi_get_device_file_info()

This function is now only used in comedi_fops.c and does not need
to be exported.

Make it static and move it to avoid forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use comedi_dev_from_minor()

Remove the need to export comedi_get_device_file_info() by using the
new helper comedi_dev_from_minor(). This will also allow us to make
the comedi_device_file_info struct private.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: introduce comedi_dev_from_minor()

A number of functions have to call comedi_get_device_file_info()
to get the comedi_device_file_info pointer for a given minor. That
pointer is only used to get the actual comedi_device pointer for
the minor.

Introduce a new helper function, comedi_dev_from_minor(), to simplify
this operation. This will also allow us to make the comedi_device_file_info
struct private.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't expose comedi_get_{read, write}_subdevice

These two inline helper function in comedidev.h are only used in
comedi_fops.c. They return information that should only be used
by the comedi core.

Move both functions to comedi_fops.c so they aren't exposed to
the comedi drivers. Also, remove the inline tag and let the
compiler figure it out.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: remove forward declarations

Move a couple of the functions to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcm_common: remove module

This module is built whenever CONFIG_COMEDI is enabled but it is
only used by the pcmmio and pcmuio drivers. The pcm_common module
consists of one exported function. Put a local copy of the function
in the pcmmio and pcmuio drivers.

This removes the need for the pcm_common module and the now unused
pcm_common.[ch] files can be deleted and removed from the Makefile.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: support stop_src == TRIG_COUNT

When setting up asynchronous commands on the special interrupt
subdevice, support the `TRIG_COUNT` stop source to allow the command to
stop automatically after a specified number of scans.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: always initialize interrupt subdevice

Initialize the special interrupt subdevice as a digital input subdevice
even if the interrupt handler cannot be registered.  It's `insn_bits`
handler will still read the interrupt status register.  This hardware
status bits in this register might be valid even if they haven't been
enabled in the interrupt control register, but this needs to be checked.
In any case, initializing the subdevice as a digital input subdevice is
harmless.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: use channel list

When setting up asynchronous commands for the special interrupt
subdevice, use the channel list to decide which interrupt sources to
enable.  Set the maximum length of the channel list to be the same as
the number of channels (2).  Normally, the channel list would include
channel 0, channel 1 or both.

When reading the scan data in the interrupt routine, the readings from
each channel in the channel list will be packed into a single unsigned
short data value.  Make each bit in this value correspond to an index in
the channel list.

Since all the channels in the channel list are read at the same time,
insist that the scan end argument is the length of the channel list and
that the conversion source is `TRIG_NOW`.

Allocate some private data for the special interrupt subdevice to hold a
spin-lock, the channels to be enabled and an indication of whether the
command is still active.  Stop the command if a buffer overflow occurs.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: only disable triggered interrupts

The interrupt handler disables all interrupt sources when a valid
interrupt occurs.  Just disable the triggered interrupt source so we can
still get interrupts for the other interrupt source.

Also add a comment indicating why the triggered interrupt source is
disabled.  The interrupt sources are level-sensitive and indicate
hardware errors that are likely to be persistent, so if we reenabled
them they would just keep triggering repeatedly.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: make insn_bits read live data

The `insn_bits` handler for the special digital input subdevice used for
interrupts currently uses `s->state` for the data value, which is set to
the value of the APCI2032_INT_STATUS_REG register when a valid interrupt
occurs.  Just read the live register contents in the `insn_bits` handler
instead of relying on the interrupt service routine to read it for us.

The register contains a couple of hardware error status bits.  They
might also be valid even when the corresponding bits have not been
enabled in the APCI_INT_CTRL_REG register in which case this would be
useful for checking for hardware errors without using interrupts, but
this needs to be checked.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: set COMEDI_CB_OVERFLOW

If the call to `comedi_buf_put()` fails in the interrupt routine, set
the `COMEDI_CB_OVERFLOW` event flag.  Note that the `COMEDI_CB_ERROR`
flag will have also been set by `comedi_buf_put()` in this case.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: correct interrupt subdevice

The subdevice type and flags are initialized incorrectly for the
interrupt subdevice - the SDF_CMD_READ value belongs in the subdevice
flags.  Fix it.  Also set the number of channels to 2 since there are 2
interrupt sources each with its own status bit.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: interrupt safety change

Put the hardware into a safe state before enabling the interrupt.  In
the interrupt routine, check the device has been fully configured by
checking `dev->attached`.  In particular, `dev->read_subdev` could be
NULL early on and although the hardware's status register should
indicate no interrupt has occurred (since it's been put into a safe
state), it's better not to rely on it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Turn some symbols static

Turn static some symbols which do not actually need to be
externally-visible

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Prefix externally-visible symbols

This prefixes all externally-visible symbols of speakup with "spk_".

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Use register defines instead of magic numbers

Use register name defines instead of magic numbers where a bit of
clarity would be useful.

Also a small typo fix and some register prefixes added, for further
clarity.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Replace rxdma csr register magic numbers with defines

Several magic numbers were used to represent rxdma csr register bitmasks.
Replace them with descriptive defines.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: echo.c: fix memory leakage

we should check the return value of calling function fir16_create(): a NULL
value means the memory allocation fails.

this patch also cleans up the error handling in function function oslec_create()

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: remove unneeded call to memset().

In uf_send_pkt_to_encrypt(), the memory area zeroed by this call to memset() is
overwritten by a call to memcpy() a few instructions later, so it is not needed.

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: echo: remove unused variable

the variable j isn't used in the loop

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: delete an unused function

line6_send_sysex_message_async() isn't called from anywhere.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: Use kmemdup rather than duplicating its implementation

staging: line6: driver.c
 The semantic patch that makes this output is available
 in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: pcm.c fix checkpatch issues

fix those checkpatch issues
drivers/staging/line6/pcm.c:84:
WARNING: simple_strtoul is obsolete, use kstrtoul instead
call to obsolete simple_strtoul() replaced by kstrtoint()

drivers/staging/line6/pcm.c:423:
ERROR: switch and case should be at the same indent
realigns comments

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: keucr: Fix parens/braces

Fixed a coding style issue. Fixed positions
of braces regarding to linux coding style.

Signed-off-by: Kurt Kanzenbach <shifty91@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: keucr: Removed trailing whitespaces

Fixed a coding style issue. Removed trailing
whitespaces in code.

Signed-off-by: Kurt Kanzenbach <shifty91@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: keucr: Replaced c99 comments

Fixed a coding style issue. Replaced all
c99 comments by c89 ones and deleted
commented out code.

Signed-off-by: Kurt Kanzenbach <shifty91@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: do not init statics to 0

Fix the checkpatch error "do not initialize statics to 0 or NULL"

Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: use same indent for switch and case

Fix the checkpatch error "switch and case should be at the same indent"

Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: don't init globals to 0 or NULL

Fix a couple of instances where checkpatch complained about
initializing globals with 0.

Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: indent with tabs, not spaces

Converted staging/rtl8187se to use tabs instead of spaces for
indentation to fix the checkpatch error "code indent should use tabs
where possible".

Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: put { on same line as struct

This fixes the checkpatch error "open brace '{' following struct go on the
same line" in staging/rtl8192u

Signed-off-by: Jennifer Naumann <Jennifer.Naumann@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: cleanfile run

Run cleanfile on all files inside drivers/staging/rtl819u

Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Jennifer Naumann <Jennifer.Naumann@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8187se: Fix spacing coding style in ieee80211/dot11d.c

The following errors fixed.
- ERROR: "foo * bar" should be "foo *bar"
- ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8187se: Fix spacing coding style in ieee80211/dot11d.c

The following errors and warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
- ERROR: that open brace { should be on the previous line
- ERROR: space required before the open parenthesis '('
- ERROR: space prohibited after that open parenthesis '('

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8187se: Fix spacing coding style in ieee80211/dot11d.c

The following errors fixed.
- ERROR: spaces required around that '=' (ctx:VxV)
- ERROR: spaces required around that '<=' (ctx:VxV)
- ERROR: space required after that ',' (ctx:VxV)

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8187se: Use netdev_ printks in ieee80211/ieee80211_wx.c

The following warnings fixed.
-WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
-WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8187se: Fix spacing coding style in ieee80211/ieee80211_wx.c

The following errors fixed.
-ERROR: spaces required around that '<' (ctx:VxV)
-ERROR: spaces required around that '?' (ctx:VxV)
-ERROR: spaces required around that ':' (ctx:VxV)
-ERROR: spaces required around that '>' (ctx:VxV)

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8187se: Fix spacing coding style in ieee80211/ieee80211_wx.c

The following errors fixed.
-ERROR: that open brace { should be on the previous line
-ERROR: space required before the open parenthesis '('
-ERROR: else should follow close brace '}'
-ERROR: space required before the open brace '{'

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8187se: Fix spacing coding style in ieee80211/ieee80211_wx.c

The following errors and warnings fixed.
- ERROR: code indent should use tabs where possible
- WARNING: please, no spaces at the start of a line
- WARNING: please, no space before tabs

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: suppress a bogus error

If mkdir() of VHCI_STATE_PATH fails because the directory
already exists, that's not an error. This patch fixes
annoying "record connection" errors that would typically
come up on attach.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Acked-by: David Chang <dchang@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: add option to turn fortify on or off

This comes handy when hacking with different cross
compilers, some of which may or may not have
_FORTIFY_SOURCE turned on by default. This patch
allows us to turn _FORTIFY_SOURCE on by specifying
--with-fortify option at configuration time (or
to turn it off by specifying --without-fortify).

If nothing is specified, default compiler behavior
is assumed.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: eliminate glib dependency

USBIP daemon relies on functions available in glib2 library
to spawn handler code for incoming connection. This makes the
whole program dependent on glib2 library, which is a GNOME library
that on systems that don't have GNOME results in pulling more
dependency, only to be able to run a relatively trivial
socket-based program.

While this may not seem to be a problem on full-blown desktops
that already have the necessary libraries, it is a big issue
on small embedded systems (think USB hub with an Ethernet port)
that only have bare essentials in their file systems.

This patch eliminates glib2 dependency by reworking the
code to use lower level system calls to dispatch connection
handler. Instead of using glib2-style event loop and dispatching
mechanism, just do a ppoll(2) system call in our own loop and call
accept(2) followed by fork(2) on the socket that has incoming
connection. Stevens' books taught us that more than twenty
years ago. No need for anything smarter in a simple server, such
as usbipd.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: add gitignore file

There are a bunch of automatically generated files that git
should not care about.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: fix build breakage in doc directory

File doc/usbip_bind_driver.8 does not exist any more but it is
listed in dist_man_MANS. This breaks the build of the userspace.
Remove the file from the list.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Acked-by: David Chang <dchang@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000-usb: Fix call to obsolete function

strict_strtoul is obsolete and should be replaced with
kstrto* function as reported by checkpatch.pl.
pInfo->CardNumber is a u8. This is why kstrtou8 should be
used here.

Signed-off-by: Kurt Kanzenbach <shifty91@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: rename struct ft1000_device to ft1000_usb

After unifying struct ft1000_info, struct ft1000_device is now wrong name.
Rename it to ft1000_usb to match its semantics.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: unify struct ft1000_info between USB and PCMCIA drivers

Unify struct ft1000_info between ft1000-usb and ft1000-pcmcia and move it to
common ft1000.h.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Marek Belisko <marek.belisko@open-nandra.com>
Review-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Fix typo in vt6655 driver

Correct spelling typo in comments within vt6655 driver.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove a useless call to memset().

This call is followed by a call to memcpy() on the same memory area, so it can
be safely removed.

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: channel/control/firmware/int/usbpipe to new structures

This patch cleans up function declarations, definitions and local variables
where appropriate replacing types defined in "ttype.h" with linux/types.h.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: iwctl/key/rf use new structures.

This patch cleans up function declarations, definitions and local variables
were appropriate replacing types defined in "ttype.h" with linux/types.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: change wmgr to new structures

This patch cleans up function declarations, definitions and local variables
were appropriate replacing types defined in "ttype.h" with linux/types.h.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: change baseband/mac/wcmd/wctl to new structures.

This patch also cleans up function declarations, definitions and local variables
were appropriate replacing types defined in "ttype.h" with linux/types.h.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: card/main_usb/device use new structure names

This patch also cleans up function declarations, definitions and local variables
were appropriate replacing types defined in "ttype.h" with linux/types.h.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: create new structure names to remove typedefs.

This patch and the next 8 patches remove the old structure names and
replace;

struct vnt_private for DEVICE_INFO and PSDevice
struct vnt_manager for SMgmtObject
struct vnt_rx_mgmt for SRxMgmtPacket and PSRxMgmtPacket
struct vnt_tx_mgmt for STxMgmtPacket and PSTxMgmtPacket

and

struct vnt_manager vnt_mgmt
to replace
SMgmtObject sMgmtObj;

Applied after patch staging: vt6656: dpc.c :RXbBulkInProcessData clean up RSC

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove QWORD from source and replace with u64.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: remove unneeded memset() in wireless_get_bssid()

A few lines after this call, we memcpy over the same memory area, so the call to
memset is not necessary.

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_util: corrects asterisk placement

This commit fixes incorrect placement of the asterisk character.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_util: converts C99 // comment

This commit converts a C99 // comment to /* */

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_util: fixes spacing around parentheses

This commit corrects the spacing in an and around parentheses in the
file.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_priv: converts C99 // comments

This commit converts C99 // comments to /* */

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_priv: converts indentation to tabs

This commit converts instances of space-based indentation to tabs.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_priv: fixes brace placement

This commit fixes incorrect brace placements in the file, as
indicated by the checkpatch.pl tool.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_priv: fixes case statement styling issues

This commit fixes issues related to the styling of case statements.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_priv: fixes incorrect #include

This commit forces the file to use <linux/uaccess.h> instead of
<asm/uaccess.h>. Everything still compiles a-OK.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_priv: fixes parentheses styling issues

This commit fixes further parentheses styling issues as identified
by the checkpatch.pl tool.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_priv: fixes spacing around parentheses

This commit fixes many instances where the spacing in and around
parentheses was applied incorrectly.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_profile.h: fixes C99 // comment

This commit converts a C99 // comment to /* */. The checkpatch.pl
tool reports that this file has no further styling issues.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: wl_profile.h: fixes spacing around parentheses

This commit cleans up the spacing around parentheses.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: sta_h2: corrects C99 // comments

This commit converts C99 // comments to /* */

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: sta_h2: fixes casting style issue

This commit cleans up a styling issue when casting to "hcf_8 *".

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: sta_h2: fixes spaces around parentheses

This commit fixes an instance where the spacing around parentheses
was incorrect.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: sta_h2: fixes malformed #include filename

This minor change simply removes quotations from within a comment
so that the checkpatch.pl tool won't complain about a malformed
include filename anymore.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: sta_h2: fixes spaces-before-tabs problems

This commit various cases where there were spaces before tabs, as
reported by the checkpatch.pl tool.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>