Florian Fainelli [Mon, 15 Dec 2014 17:57:14 +0000 (09:57 -0800)]
net: systemport: always select FIXED_PHY
There is no need to do the following:
select FIXED_PHY if SYSTEMPORT=y, as this implies that we will not be able
to build and/or run the driver correctly when built as a module, which
is no longer an issue since commit
37e9a6904520 ("net: phy: export
fixed_phy_register()")
Fixes: a3862db2d3c4 ("net: systemport: hook SYSTEMPORT driver in the build")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 15 Dec 2014 17:57:13 +0000 (09:57 -0800)]
net: bcmgenet: always select FIXED_PHY
There is no need to do the following:
select FIXED_PHY if BCMGENET=y, as this implies that we will not be able
to build and/or run the driver correctly when built as a module, which
is no longer an issue since commit
37e9a6904520 ("net: phy: export
fixed_phy_register()")
Fixes: b0ba512e225d ("net: bcmgenet: enable driver to work without device tree"
Fixes: bdaa53bde55f ("net: bcmgenet: hook into the build system")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Dec 2014 16:50:50 +0000 (11:50 -0500)]
Merge branch 'macb'
Cyrille Pitchen says:
====================
net/macb: fix multiqueue support patch up
This series of patches is a fixup for the multiqueue support patch.
The first patch fixes a bug introduced by the multiqueue support patch.
The second one doesn't fix a bug but simplify the source code by removing
useless calls to devm_free_irq() since we use managed device resources for
IRQs.
They were applied on the net-next tree and tested with a sama5d36ek board.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cyrille Pitchen [Mon, 15 Dec 2014 14:13:32 +0000 (15:13 +0100)]
net/macb: remove useless calls of devm_free_irq()
Inside macb_probe(), when devm_request_irq() fails on queue q, there is no need
to call devm_free_irq() on queues 0..q-1 because the managed device resources
are released later when calling free_netdev().
Also removing devm_free_irq() call from macb_remove() for the same reason.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cyrille Pitchen [Mon, 15 Dec 2014 14:13:31 +0000 (15:13 +0100)]
net/macb: fix misplaced call of free_netdev() in macb_remove()
fix a bug introduced by the multiqueue support patch:
"net/macb: add TX multiqueue support for gem"
the "bp" pointer to the netdev private data was dereferenced and used after the
associated memory had been freed by calling free_netdev().
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Mon, 15 Dec 2014 12:21:42 +0000 (13:21 +0100)]
rds: Fix min() warning in rds_message_inc_copy_to_user()
net/rds/message.c: In function ‘rds_message_inc_copy_to_user’:
net/rds/message.c:328: warning: comparison of distinct pointer types lacks a cast
Use min_t(unsigned long, ...) like is done in
rds_message_copy_from_user().
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Mon, 15 Dec 2014 11:25:51 +0000 (12:25 +0100)]
net: stmmac: sti: Fix uninitialized pointer dereference if !OF
If CONFIG_OF is not set:
drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c: In function ‘sti_dwmac_parse_data’:
drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c:318: warning: ‘rs’ is used uninitialized in this function
of_property_read_string() will return -ENOSYS in this case, and rs will
be an uninitialized pointer.
While the fallback clock selection is already selected correctly in this
case, the string comparisons should be skipped too, else the system will
crash while dereferencing the uninitialized pointer.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Mon, 15 Dec 2014 09:02:27 +0000 (10:02 +0100)]
net: smc91x: Fix build without gpiolib
If GPIOLIB=n the following build errors occur:
drivers/net/ethernet/smsc/smc91x.c: In function 'try_toggle_control_gpio':
drivers/net/ethernet/smsc/smc91x.c:2204:2: error: implicit declaration of function 'devm_gpiod_get_index' [-Werror=implicit-function-declaration]
drivers/net/ethernet/smsc/smc91x.c:2204:7: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/net/ethernet/smsc/smc91x.c:2213:2: error: implicit declaration of function 'gpiod_direction_output' [-Werror=implicit-function-declaration]
drivers/net/ethernet/smsc/smc91x.c:2216:3: error: implicit declaration of function 'devm_gpiod_put' [-Werror=implicit-function-declaration]
drivers/net/ethernet/smsc/smc91x.c:2222:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration]
Fix this by letting the driver depend on GPIOLIB if OF is selected.
Fixes: 7d2911c4381 ("net: smc91x: Fix gpios for device tree based booting")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timo Teräs [Mon, 15 Dec 2014 07:24:13 +0000 (09:24 +0200)]
gre: fix the inner mac header in nbma tunnel xmit path
The NBMA GRE tunnels temporarily push GRE header that contain the
per-packet NBMA destination on the skb via header ops early in xmit
path. It is the later pulled before the real GRE header is constructed.
The inner mac was thus set differently in nbma case: the GRE header
has been pushed by neighbor layer, and mac header points to beginning
of the temporary gre header (set by dev_queue_xmit).
Now that the offloads expect mac header to point to the gre payload,
fix the xmit patch to:
- pull first the temporary gre header away
- and reset mac header to point to gre payload
This fixes tso to work again with nbma tunnels.
Fixes: 14051f0452a2 ("gre: Use inner mac length when computing tunnel length")
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Cc: Tom Herbert <therbert@google.com>
Cc: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Duan Jiong [Mon, 15 Dec 2014 06:58:53 +0000 (14:58 +0800)]
fib_trie.txt: fix typo
Fix the typo, there should be "It".
On the other hand, fix whitespace errors detected by checkpatch.pl
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Asaf Vertz [Sun, 14 Dec 2014 08:34:18 +0000 (10:34 +0200)]
cirrus: cs89x0: fix time comparison
To be future-proof and for better readability the time comparisons are
modified to use time_before, time_after, and time_after_eq instead of
plain, error-prone math.
Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Dec 2014 16:35:00 +0000 (11:35 -0500)]
Merge branch 'mlx4'
Or Gerlitz says:
====================
mlx4 driver fixes for 3.19-rc1
Just fixes for two small issues introduced in the 3.19 merge window
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Sun, 14 Dec 2014 14:18:05 +0000 (16:18 +0200)]
net/mlx4_core: Avoid double dumping of the PF device capabilities
To support asymmetric EQ allocations, we should query the device
capabilities prior to enabling SRIOV. As a side effect of adding that,
we are dumping the PF device capabilities twice. Avoid that by moving
the printing into a helper function which is called once.
Fixes: 7ae0e400cd93 ('net/mlx4_core: Flexible (asymmetric) allocation of
EQs and MSI-X vectors for PF/VFs')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matan Barak [Sun, 14 Dec 2014 14:18:04 +0000 (16:18 +0200)]
net/mlx4_core: Fixed memory leak and incorrect refcount in mlx4_load_one
The current mlx4_load_one has a memory leak as it always allocates
dev_cap, but frees it only on error.
In addition, even if VFs exist when mlx4_load_one is called,
we still need to notify probed VFs that we're loading (by
incrementing pf_loading).
Fixes: a0eacca948d2 ('net/mlx4_core: Refactor mlx4_load_one')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 15 Dec 2014 04:36:37 +0000 (20:36 -0800)]
Merge branch 'next' of git://git./linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
"In terms of changes, there's general maintenance to the Smack,
SELinux, and integrity code.
The IMA code adds a new kconfig option, IMA_APPRAISE_SIGNED_INIT,
which allows IMA appraisal to require signatures. Support for reading
keys from rootfs before init is call is also added"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
selinux: Remove security_ops extern
security: smack: fix out-of-bounds access in smk_parse_smack()
VFS: refactor vfs_read()
ima: require signature based appraisal
integrity: provide a hook to load keys when rootfs is ready
ima: load x509 certificate from the kernel
integrity: provide a function to load x509 certificate from the kernel
integrity: define a new function integrity_read_file()
Security: smack: replace kzalloc with kmem_cache for inode_smack
Smack: Lock mode for the floor and hat labels
ima: added support for new kernel cmdline parameter ima_template_fmt
ima: allocate field pointers array on demand in template_desc_init_fields()
ima: don't allocate a copy of template_fmt in template_desc_init_fields()
ima: display template format in meas. list if template name length is zero
ima: added error messages to template-related functions
ima: use atomic bit operations to protect policy update interface
ima: ignore empty and with whitespaces policy lines
ima: no need to allocate entry for comment
ima: report policy load status
ima: use path names cache
...
Linus Torvalds [Mon, 15 Dec 2014 00:43:47 +0000 (16:43 -0800)]
Merge tag 'char-misc-3.19-rc1' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver update for 3.19-rc1
Lots of little things all over the place in different drivers, and a
new subsystem, "coresight" has been added. Full details are in the
shortlog"
* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
parport: parport_pc, do not remove parent devices early
spmi: Remove shutdown/suspend/resume kernel-doc
carma-fpga-program: drop videobuf dependency
carma-fpga: drop videobuf dependency
carma-fpga-program.c: fix compile errors
i8k: Fix temperature bug handling in i8k_get_temp()
cxl: Name interrupts in /proc/interrupt
CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
coresight-replicator: remove .owner field for driver
coresight: fixed comments in coresight.h
coresight: fix typo in comment in coresight-priv.h
coresight: bindings for coresight drivers
coresight: Adding ABI documentation
w1: support auto-load of w1_bq27000 module.
w1: avoid potential u16 overflow
cn: verify msg->len before making callback
mei: export fw status registers through sysfs
mei: read and print all six FW status registers
mei: txe: add cherrytrail device id
mei: kill cached host and me csr values
...
Linus Torvalds [Mon, 15 Dec 2014 00:10:09 +0000 (16:10 -0800)]
Merge tag 'driver-core-3.19-rc1' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
Linus Torvalds [Sun, 14 Dec 2014 23:23:32 +0000 (15:23 -0800)]
Merge tag 'tty-3.19-rc1' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here's the big tty/serial driver update for 3.19-rc1.
There are a number of TTY core changes/fixes in here from Peter Hurley
that have all been teted in linux-next for a long time now. There are
also the normal serial driver updates as well, full details in the
changelog below"
* tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits)
serial: pxa: hold port.lock when reporting modem line changes
tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put"
tty: Deletion of unnecessary checks before two function calls
n_tty: Fix read_buf race condition, increment read_head after pushing data
serial: of-serial: add PM suspend/resume support
Revert "serial: of-serial: add PM suspend/resume support"
Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type"
serial: 8250: don't attempt a trylock if in sysrq
serial: core: Add big-endian iotype
serial: samsung: use port->fifosize instead of hardcoded values
serial: samsung: prefer to use fifosize from driver data
serial: samsung: fix style problems
serial: samsung: wait for transfer completion before clock disable
serial: icom: fix error return code
serial: tegra: clean up tty-flag assignments
serial: Fix io address assign flow with Fintek PCI-to-UART Product
serial: mxs-auart: fix tx_empty against shift register
serial: mxs-auart: fix gpio change detection on interrupt
serial: mxs-auart: Fix mxs_auart_set_ldisc()
serial: 8250_dw: Use 64-bit access for OCTEON.
...
Linus Torvalds [Sun, 14 Dec 2014 22:57:16 +0000 (14:57 -0800)]
Merge tag 'usb-3.19-rc1' of git://git./linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big set of USB and PHY patches for 3.19-rc1.
The normal churn in the USB gadget area is in here, as well as xhci
and other individual USB driver updates. The PHY tree is also in
here, as there were dependancies on the USB tree.
All of these have been in linux-next"
* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
arm: omap3: twl: remove usb phy init data
usbip: fix error handling in stub_probe()
usb: gadget: udc: missing curly braces
USB: mos7720: delete some unneeded code
wusb: replace memset by memzero_explicit
usbip: remove unneeded structure
usb: xhci: fix comment for PORT_DEV_REMOVE
xhci: don't use the same variable for stopped and halted rings current TD
xhci: clear extra bits from slot context when setting max exit latency
xhci: cleanup finish_td function
USB: adutux: NULL dereferences on disconnect
usb: chipidea: fix platform_no_drv_owner.cocci warnings
usb: chipidea: Fixed a few typos in comments
Documentation: bindings: add doc for the USB2 ChipIdea USB driver
usb: chipidea: add a usb2 driver for ci13xxx
usb: chipidea: fix phy handling
usb: chipidea: remove duplicate dev_set_drvdata for host_start
usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
usb: chipidea: add controller reset API
usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
...
Linus Torvalds [Sun, 14 Dec 2014 22:42:53 +0000 (14:42 -0800)]
Merge tag 'squashfs-updates' of git://git./linux/kernel/git/pkl/squashfs-next
Pull squashfs update from Phillip Lougher:
"These patches optionally add LZ4 compression support to Squashfs.
LZ4 is a lightweight compression algorithm which can be used on
embedded systems to reduce CPU and memory overhead (in comparison to
the standard zlib compression).
These patches add the wrapper code to allow Squashfs to use the
existing LZ4 decompression code, and the necessary configuration
option"
* tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next:
Squashfs: Add LZ4 compression configuration option
Squashfs: add LZ4 compression support
Linus Torvalds [Sun, 14 Dec 2014 22:05:05 +0000 (14:05 -0800)]
Merge tag 'gpio-v3.19-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull take two of the GPIO updates:
"Same stuff as last time, now with a fixup patch for the previous
compile error plus I ran a few extra rounds of compile-testing.
This is the bulk of GPIO changes for the v3.19 series:
- A new API that allows setting more than one GPIO at the time. This
is implemented for the new descriptor-based API only and makes it
possible to e.g. toggle a clock and data line at the same time, if
the hardware can do this with a single register write. Both
consumers and drivers need new calls, and the core will fall back
to driving individual lines where needed. Implemented for the
MPC8xxx driver initially
- Patched the mdio-mux-gpio and the serial mctrl driver that drives
modems to use the new multiple-setting API to set several signals
simultaneously
- Get rid of the global GPIO descriptor array, and instead allocate
descriptors dynamically for each GPIO on a certain GPIO chip. This
moves us closer to getting rid of the limitation of using the
global, static GPIO numberspace
- New driver and device tree bindings for 74xx ICs
- New driver and device tree bindings for the VF610 Vybrid
- Support the RCAR r8a7793 and r8a7794
- Guidelines for GPIO device tree bindings trying to get things a bit
more strict with the advent of combined device properties
- Suspend/resume support for the MVEBU driver
- A slew of minor fixes and improvements"
* tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits)
gpio: mcp23s08: fix up compilation error
gpio: pl061: document gpio-ranges property for bindings file
gpio: pl061: hook request if gpio-ranges avaiable
gpio: mcp23s08: Add option to configure IRQ output polarity as active high
gpio: fix deferred probe detection for legacy API
serial: mctrl_gpio: use gpiod_set_array function
mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
gpio: remove const modifier from gpiod_get_direction()
gpio: remove gpio_descs global array
gpio: mxs: implement get_direction callback
gpio: em: Use dynamic allocation of GPIOs
gpio: Check if base is positive before calling gpio_is_valid()
gpio: mcp23s08: Add simple IRQ support for SPI devices
gpio: mcp23s08: request a shared interrupt
gpio: mcp23s08: Do not free unrequested interrupt
gpio: rcar: Add r8a7793 and r8a7794 support
gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function
gpiolib: allow simultaneous setting of multiple GPIO outputs
gpio: mvebu: add suspend/resume support
gpio: gpio-davinci: remove duplicate check on resource
..
Linus Torvalds [Sun, 14 Dec 2014 21:36:57 +0000 (13:36 -0800)]
Merge git://git.kvack.org/~bcrl/aio-next
Pull aio updates from Benjamin LaHaise.
* git://git.kvack.org/~bcrl/aio-next:
aio: Skip timer for io_getevents if timeout=0
aio: Make it possible to remap aio ring
Linus Torvalds [Sun, 14 Dec 2014 20:54:40 +0000 (12:54 -0800)]
Merge branch 'i2c/for-3.19' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"For 3.19, the I2C subsystem has to offer special candy this time.
Right in time for Christmas :)
- I2C slave framework: finally, a generic mechanism for Linux being
an I2C slave (if the bus driver supports that). Docs are still
missing but will come later this cycle, the code is good enough to
go.
- I2C muxes represent their topology in sysfs much more detailed.
This will help users to navigate around much easier.
- irq population of i2c clients is now done at probe time, not device
creation time, to have better support for deferred probing.
- new drivers for Imagination SCB, Amlogic Meson
- DMA support added for Freescale IMX, Renesas SHMobile
- slightly bigger driver updates to OMAP, i801, AT91, and rk3x
(mostly quirk handling, timing updates, and using better kernel
interfaces)
- eeprom driver can now write with byte-access (very slow, but OK to
have)
- and the bunch of smaller fixes, cleanups, ID updates..."
* 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (56 commits)
i2c: sh_mobile: remove unneeded DMA mask
i2c: rcar: add slave support
i2c: slave-eeprom: add eeprom simulator driver
i2c: core changes for slave support
MAINTAINERS: add I2C dt bindings also to I2C realm
i2c: designware: Fix falling time bindings doc
i2c: davinci: switch to use platform_get_irq
Documentation: i2c: Use PM ops instead of legacy suspend/resume
i2c: sh_mobile: optimize irq entry
i2c: pxa: add support for SCCB devices
omap: i2c: don't check bus state IP rev3.3 and earlier
i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
i2c: rk3x: add Kconfig dependency on COMMON_CLK
i2c: omap: add notes related to i2c multimaster mode
i2c: omap: don't reset controller if Arbitration Lost detected
i2c: omap: implement workaround for handling invalid BB-bit values
i2c: omap: cleanup register definitions
i2c: rk3x: handle dynamic clock rate changes correctly
i2c: at91: enable probe deferring on dma channel request
i2c: at91: remove legacy DMA support
...
Linus Torvalds [Sun, 14 Dec 2014 20:13:05 +0000 (12:13 -0800)]
Merge tag 'md/3.19' of git://neil.brown.name/md
Pull md updates from Neil Brown:
"Three fixes for md.
I did have a largish set of locking changes queued, but late testing
showed they weren't quite as stable as I thought and while I fixed
what I found, I decided it safer to delay them a release ...
particularly as I'll be AFK for a few weeks. So expect a larger batch
next time :-)"
* tag 'md/3.19' of git://neil.brown.name/md:
md: Check MD_RECOVERY_RUNNING as well as ->sync_thread.
md: fix semicolon.cocci warnings
md/raid5: fetch_block must fetch all the blocks handle_stripe_dirtying wants.
Linus Torvalds [Sun, 14 Dec 2014 19:51:50 +0000 (11:51 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes (mainly Andy's TLS fixes), plus a cleanup"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tls: Disallow unusual TLS segments
x86/tls: Validate TLS entries to protect espfix
MAINTAINERS: Add me as x86 VDSO submaintainer
x86/asm: Unify segment selector defines
x86/asm: Guard against building the 32/64-bit versions of the asm-offsets*.c file directly
x86_64, switch_to(): Load TLS descriptors before switching DS and ES
x86/mm: Use min() instead of min_t() in the e820 printout code
x86/mm: Fix zone ranges boot printout
x86/doc: Update documentation after file shuffling
Andy Lutomirski [Fri, 5 Dec 2014 00:48:17 +0000 (16:48 -0800)]
x86/tls: Disallow unusual TLS segments
Users have no business installing custom code segments into the
GDT, and segments that are not present but are otherwise valid
are a historical source of interesting attacks.
For completeness, block attempts to set the L bit. (Prior to
this patch, the L bit would have been silently dropped.)
This is an ABI break. I've checked glibc, musl, and Wine, and
none of them look like they'll have any trouble.
Note to stable maintainers: this is a hardening patch that fixes
no known bugs. Given the possibility of ABI issues, this
probably shouldn't be backported quickly.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: stable@vger.kernel.org # optional
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: security@kernel.org <security@kernel.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Fri, 5 Dec 2014 00:48:16 +0000 (16:48 -0800)]
x86/tls: Validate TLS entries to protect espfix
Installing a 16-bit RW data segment into the GDT defeats espfix.
AFAICT this will not affect glibc, Wine, or dosemu at all.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: stable@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: security@kernel.org <security@kernel.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Sat, 13 Dec 2014 00:25:47 +0000 (16:25 -0800)]
MAINTAINERS: Add me as x86 VDSO submaintainer
Here goes... :)
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1042001e502f8e0deb0edfeeac209b68378650cf.1418430292.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fam Zheng [Thu, 6 Nov 2014 12:44:36 +0000 (20:44 +0800)]
aio: Skip timer for io_getevents if timeout=0
In this case, it is basically a polling. Let's not involve timer at all
because that would hurt performance for application event loops.
In an arbitrary test I've done, io_getevents syscall elapsed time
reduces from 50000+ nanoseconds to a few hundereds.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Pavel Emelyanov [Thu, 18 Sep 2014 15:56:17 +0000 (19:56 +0400)]
aio: Make it possible to remap aio ring
There are actually two issues this patch addresses. Let me start with
the one I tried to solve in the beginning.
So, in the checkpoint-restore project (criu) we try to dump tasks'
state and restore one back exactly as it was. One of the tasks' state
bits is rings set up with io_setup() call. There's (almost) no problems
in dumping them, there's a problem restoring them -- if I dump a task
with aio ring originally mapped at address A, I want to restore one
back at exactly the same address A. Unfortunately, the io_setup() does
not allow for that -- it mmaps the ring at whatever place mm finds
appropriate (it calls do_mmap_pgoff() with zero address and without
the MAP_FIXED flag).
To make restore possible I'm going to mremap() the freshly created ring
into the address A (under which it was seen before dump). The problem is
that the ring's virtual address is passed back to the user-space as the
context ID and this ID is then used as search key by all the other io_foo()
calls. Reworking this ID to be just some integer doesn't seem to work, as
this value is already used by libaio as a pointer using which this library
accesses memory for aio meta-data.
So, to make restore work we need to make sure that
a) ring is mapped at desired virtual address
b) kioctx->user_id matches this value
Having said that, the patch makes mremap() on aio region update the
kioctx's user_id and mmap_base values.
Here appears the 2nd issue I mentioned in the beginning of this mail.
If (regardless of the C/R dances I do) someone creates an io context
with io_setup(), then mremap()-s the ring and then destroys the context,
the kill_ioctx() routine will call munmap() on wrong (old) address.
This will result in a) aio ring remaining in memory and b) some other
vma get unexpectedly unmapped.
What do you think?
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Linus Torvalds [Sat, 13 Dec 2014 22:22:26 +0000 (14:22 -0800)]
Merge branch 'for-3.19/drivers' of git://git.kernel.dk/linux-block
Pull block layer driver updates from Jens Axboe:
- NVMe updates:
- The blk-mq conversion from Matias (and others)
- A stack of NVMe bug fixes from the nvme tree, mostly from Keith.
- Various bug fixes from me, fixing issues in both the blk-mq
conversion and generic bugs.
- Abort and CPU online fix from Sam.
- Hot add/remove fix from Indraneel.
- A couple of drbd fixes from the drbd team (Andreas, Lars, Philipp)
- With the generic IO stat accounting from 3.19/core, converting md,
bcache, and rsxx to use those. From Gu Zheng.
- Boundary check for queue/irq mode for null_blk from Matias. Fixes
cases where invalid values could be given, causing the device to hang.
- The xen blkfront pull request, with two bug fixes from Vitaly.
* 'for-3.19/drivers' of git://git.kernel.dk/linux-block: (56 commits)
NVMe: fix race condition in nvme_submit_sync_cmd()
NVMe: fix retry/error logic in nvme_queue_rq()
NVMe: Fix FS mount issue (hot-remove followed by hot-add)
NVMe: fix error return checking from blk_mq_alloc_request()
NVMe: fix freeing of wrong request in abort path
xen/blkfront: remove redundant flush_op
xen/blkfront: improve protection against issuing unsupported REQ_FUA
NVMe: Fix command setup on IO retry
null_blk: boundary check queue_mode and irqmode
block/rsxx: use generic io stats accounting functions to simplify io stat accounting
md: use generic io stats accounting functions to simplify io stat accounting
drbd: use generic io stats accounting functions to simplify io stat accounting
md/bcache: use generic io stats accounting functions to simplify io stat accounting
NVMe: Update module version major number
NVMe: fail pci initialization if the device doesn't have any BARs
NVMe: add ->exit_hctx() hook
NVMe: make setup work for devices that don't do INTx
NVMe: enable IO stats by default
NVMe: nvme_submit_async_admin_req() must use atomic rq allocation
NVMe: replace blk_put_request() with blk_mq_free_request()
...
Linus Torvalds [Sat, 13 Dec 2014 22:14:23 +0000 (14:14 -0800)]
Merge branch 'for-3.19/core' of git://git.kernel.dk/linux-block
Pull block driver core update from Jens Axboe:
"This is the pull request for the core block IO changes for 3.19. Not
a huge round this time, mostly lots of little good fixes:
- Fix a bug in sysfs blktrace interface causing a NULL pointer
dereference, when enabled/disabled through that API. From Arianna
Avanzini.
- Various updates/fixes/improvements for blk-mq:
- A set of updates from Bart, mostly fixing buts in the tag
handling.
- Cleanup/code consolidation from Christoph.
- Extend queue_rq API to be able to handle batching issues of IO
requests. NVMe will utilize this shortly. From me.
- A few tag and request handling updates from me.
- Cleanup of the preempt handling for running queues from Paolo.
- Prevent running of unmapped hardware queues from Ming Lei.
- Move the kdump memory limiting check to be in the correct
location, from Shaohua.
- Initialize all software queues at init time from Takashi. This
prevents a kobject warning when CPUs are brought online that
weren't online when a queue was registered.
- Single writeback fix for I_DIRTY clearing from Tejun. Queued with
the core IO changes, since it's just a single fix.
- Version X of the __bio_add_page() segment addition retry from
Maurizio. Hope the Xth time is the charm.
- Documentation fixup for IO scheduler merging from Jan.
- Introduce (and use) generic IO stat accounting helpers for non-rq
drivers, from Gu Zheng.
- Kill off artificial limiting of max sectors in a request from
Christoph"
* 'for-3.19/core' of git://git.kernel.dk/linux-block: (26 commits)
bio: modify __bio_add_page() to accept pages that don't start a new segment
blk-mq: Fix uninitialized kobject at CPU hotplugging
blktrace: don't let the sysfs interface remove trace from running list
blk-mq: Use all available hardware queues
blk-mq: Micro-optimize bt_get()
blk-mq: Fix a race between bt_clear_tag() and bt_get()
blk-mq: Avoid that __bt_get_word() wraps multiple times
blk-mq: Fix a use-after-free
blk-mq: prevent unmapped hw queue from being scheduled
blk-mq: re-check for available tags after running the hardware queue
blk-mq: fix hang in bt_get()
blk-mq: move the kdump check to blk_mq_alloc_tag_set
blk-mq: cleanup tag free handling
blk-mq: use 'nr_cpu_ids' as highest CPU ID count for hwq <-> cpu map
blk: introduce generic io stat accounting help function
blk-mq: handle the single queue case in blk_mq_hctx_next_cpu
genhd: check for int overflow in disk_expand_part_tbl()
blk-mq: add blk_mq_free_hctx_request()
blk-mq: export blk_mq_free_request()
blk-mq: use get_cpu/put_cpu instead of preempt_disable/preempt_enable
...
Linus Torvalds [Sat, 13 Dec 2014 22:04:41 +0000 (14:04 -0800)]
Merge tag 'trace-seq-buf-3.19-v2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixlet from Steven Rostedt:
"Remove unnecessary preempt_disable in printk()"
* tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
printk: Do not disable preemption for accessing printk_func
Linus Torvalds [Sat, 13 Dec 2014 22:01:11 +0000 (14:01 -0800)]
Merge tag 'trace-fixes-v3.18' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Here's two fixes:
1) Discovered by Fengguang Wu's tests. I changed the parameters to
the function graph x86 prepare_ftrace_return call but forgot to
update the call from entry_32 (i386 version). This patch corrects
that.
2) I was tracing some code and found that the sched_switch tracepoint
was showing tasks in the INTERRUPTIBLE state as RUNNING. This was
due to the updates to convert preempt_count into a per_cpu
variable. The tracepoint logic was made to use the tasks
saved_preempt_count which could hold a stale "PREEMPT_ACTIVE",
instead of using the current preempt_count() call"
* tag 'trace-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/sched: Check preempt_count() for current when reading task->state
ftrace/x86: Update i386 call to prepare_ftrace_return()
Linus Torvalds [Sat, 13 Dec 2014 21:41:28 +0000 (13:41 -0800)]
Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
"Two small patches from the audit next branch; only one of which has
any real significant code changes, the other is simply a MAINTAINERS
update for audit.
The single code patch is pretty small and rather straightforward, it
changes the audit "version" number reported to userspace from an
integer to a bitmap which is used to indicate the functionality of the
running kernel. This really doesn't have much impact on the kernel,
but it will make life easier for the audit userspace folks.
Thankfully we were still on a version number which allowed us to do
this without breaking userspace"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: convert status version to a feature bitmap
audit: add Paul Moore to the MAINTAINERS entry
Linus Torvalds [Sat, 13 Dec 2014 21:33:26 +0000 (13:33 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
- The crypto API is now documented :)
- Disallow arbitrary module loading through crypto API.
- Allow get request with empty driver name through crypto_user.
- Allow speed testing of arbitrary hash functions.
- Add caam support for ctr(aes), gcm(aes) and their derivatives.
- nx now supports concurrent hashing properly.
- Add sahara support for SHA1/256.
- Add ARM64 version of CRC32.
- Misc fixes.
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
crypto: tcrypt - Allow speed testing of arbitrary hash functions
crypto: af_alg - add user space interface for AEAD
crypto: qat - fix problem with coalescing enable logic
crypto: sahara - add support for SHA1/256
crypto: sahara - replace tasklets with kthread
crypto: sahara - add support for i.MX53
crypto: sahara - fix spinlock initialization
crypto: arm - replace memset by memzero_explicit
crypto: powerpc - replace memset by memzero_explicit
crypto: sha - replace memset by memzero_explicit
crypto: sparc - replace memset by memzero_explicit
crypto: algif_skcipher - initialize upon init request
crypto: algif_skcipher - removed unneeded code
crypto: algif_skcipher - Fixed blocking recvmsg
crypto: drbg - use memzero_explicit() for clearing sensitive data
crypto: drbg - use MODULE_ALIAS_CRYPTO
crypto: include crypto- module prefix in template
crypto: user - add MODULE_ALIAS
crypto: sha-mb - remove a bogus NULL check
crytpo: qat - Fix 64 bytes requests
...
Linus Torvalds [Sat, 13 Dec 2014 21:00:36 +0000 (13:00 -0800)]
Merge branch 'akpm' (second patch-bomb from Andrew)
Merge second patchbomb from Andrew Morton:
- the rest of MM
- misc fs fixes
- add execveat() syscall
- new ratelimit feature for fault-injection
- decompressor updates
- ipc/ updates
- fallocate feature creep
- fsnotify cleanups
- a few other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits)
cgroups: Documentation: fix trivial typos and wrong paragraph numberings
parisc: percpu: update comments referring to __get_cpu_var
percpu: update local_ops.txt to reflect this_cpu operations
percpu: remove __get_cpu_var and __raw_get_cpu_var macros
fsnotify: remove destroy_list from fsnotify_mark
fsnotify: unify inode and mount marks handling
fallocate: create FAN_MODIFY and IN_MODIFY events
mm/cma: make kmemleak ignore CMA regions
slub: fix cpuset check in get_any_partial
slab: fix cpuset check in fallback_alloc
shmdt: use i_size_read() instead of ->i_size
ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
ipc/msg: increase MSGMNI, remove scaling
ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM
ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
lib/decompress.c: consistency of compress formats for kernel image
decompress_bunzip2: off by one in get_next_block()
usr/Kconfig: make initrd compression algorithm selection not expert
fault-inject: add ratelimit option
ratelimit: add initialization macro
...
SeongJae Park [Sat, 13 Dec 2014 00:58:50 +0000 (16:58 -0800)]
cgroups: Documentation: fix trivial typos and wrong paragraph numberings
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Lameter [Sat, 13 Dec 2014 00:58:47 +0000 (16:58 -0800)]
parisc: percpu: update comments referring to __get_cpu_var
__get_cpu_var was removed. Update comments to refer to
this_cpu_ptr() instead.
Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Lameter [Sat, 13 Dec 2014 00:58:45 +0000 (16:58 -0800)]
percpu: update local_ops.txt to reflect this_cpu operations
Update the documentation to reflect changes due to the availability of
this_cpu operations.
Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Lameter [Sat, 13 Dec 2014 00:58:42 +0000 (16:58 -0800)]
percpu: remove __get_cpu_var and __raw_get_cpu_var macros
No user is left in the kernel source tree. Therefore we can drop the
definitions.
This is the final merge of the transition away from __get_cpu_var. After
this patch the kernel will not build if anyone uses __get_cpu_var.
Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Sat, 13 Dec 2014 00:58:39 +0000 (16:58 -0800)]
fsnotify: remove destroy_list from fsnotify_mark
destroy_list is used to track marks which still need waiting for srcu
period end before they can be freed. However by the time mark is added to
destroy_list it isn't in group's list of marks anymore and thus we can
reuse fsnotify_mark->g_list for queueing into destroy_list. This saves
two pointers for each fsnotify_mark.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Sat, 13 Dec 2014 00:58:36 +0000 (16:58 -0800)]
fsnotify: unify inode and mount marks handling
There's a lot of common code in inode and mount marks handling. Factor it
out to a common helper function.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heinrich Schuchardt [Sat, 13 Dec 2014 00:58:34 +0000 (16:58 -0800)]
fallocate: create FAN_MODIFY and IN_MODIFY events
The fanotify and the inotify API can be used to monitor changes of the
file system. System call fallocate() modifies files. Hence it should
trigger the corresponding fanotify (FAN_MODIFY) and inotify (IN_MODIFY)
events. The most interesting case is FALLOC_FL_COLLAPSE_RANGE because
this value allows to create arbitrary file content from random data.
This patch adds the missing call to fsnotify_modify().
The FAN_MODIFY and IN_MODIFY event will be created when fallocate()
succeeds. It will even be created if the file length remains unchanged,
e.g. when calling fanotify with flag FALLOC_FL_KEEP_SIZE.
This logic was primarily chosen to keep the coding simple.
It resembles the logic of the write() system call.
When we call write() we always create a FAN_MODIFY event, even in the case
of overwriting with identical data.
Events FAN_MODIFY and IN_MODIFY do not provide any guarantee that data was
actually changed.
Furthermore even if if the filesize remains unchanged, fallocate() may
influence whether a subsequent write() will succeed and hence the
fallocate() call may be considered a modification.
The fallocate(2) man page teaches: After a successful call, subsequent
writes into the range specified by offset and len are guaranteed not to
fail because of lack of disk space.
So calling fallocate(fd, FALLOC_FL_KEEP_SIZE, offset, len) may result in
different outcomes of a subsequent write depending on the values of offset
and len.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@parisplace.org>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thierry Reding [Sat, 13 Dec 2014 00:58:31 +0000 (16:58 -0800)]
mm/cma: make kmemleak ignore CMA regions
kmemleak will add allocations as objects to a pool. The memory allocated
for each object in this pool is periodically searched for pointers to
other allocated objects. This only works for memory that is mapped into
the kernel's virtual address space, which happens not to be the case for
most CMA regions.
Furthermore, CMA regions are typically used to store data transferred to
or from a device and therefore don't contain pointers to other objects.
Without this, the kernel crashes on the first execution of the
scan_gray_list() because it tries to access highmem. Perhaps a more
appropriate fix would be to reject any object that can't map to a kernel
virtual address?
[akpm@linux-foundation.org: add comment]
[akpm@linux-foundation.org: fix comment, per Catalin]
[sfr@canb.auug.org.au: include linux/io.h for phys_to_virt()]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Sat, 13 Dec 2014 00:58:28 +0000 (16:58 -0800)]
slub: fix cpuset check in get_any_partial
If we fail to allocate from the current node's stock, we look for free
objects on other nodes before calling the page allocator (see
get_any_partial). While checking other nodes we respect cpuset
constraints by calling cpuset_zone_allowed. We enforce hardwall check.
As a result, we will fallback to the page allocator even if there are some
pages cached on other nodes, but the current cpuset doesn't have them set.
However, the page allocator uses softwall check for kernel allocations,
so it may allocate from one of the other nodes in this case.
Therefore we should use softwall cpuset check in get_any_partial to
conform with the cpuset check in the page allocator.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Sat, 13 Dec 2014 00:58:25 +0000 (16:58 -0800)]
slab: fix cpuset check in fallback_alloc
fallback_alloc is called on kmalloc if the preferred node doesn't have
free or partial slabs and there's no pages on the node's free list
(GFP_THISNODE allocations fail). Before invoking the reclaimer it tries
to locate a free or partial slab on other allowed nodes' lists. While
iterating over the preferred node's zonelist it skips those zones which
hardwall cpuset check returns false for. That means that for a task bound
to a specific node using cpusets fallback_alloc will always ignore free
slabs on other nodes and go directly to the reclaimer, which, however, may
allocate from other nodes if cpuset.mem_hardwall is unset (default). As a
result, we may get lists of free slabs grow without bounds on other nodes,
which is bad, because inactive slabs are only evicted by cache_reap at a
very slow rate and cannot be dropped forcefully.
To reproduce the issue, run a process that will walk over a directory tree
with lots of files inside a cpuset bound to a node that constantly
experiences memory pressure. Look at num_slabs vs active_slabs growth as
reported by /proc/slabinfo.
To avoid this we should use softwall cpuset check in fallback_alloc.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Sat, 13 Dec 2014 00:58:22 +0000 (16:58 -0800)]
shmdt: use i_size_read() instead of ->i_size
Andrew Morton noted
http://lkml.kernel.org/r/
20141104142027.
a7a0d010772d84560b445f59@linux-foundation.org
that the shmdt uses inode->i_size outside of i_mutex being held.
There is one more case in shm.c in shm_destroy(). This converts
both users over to use i_size_read().
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Sat, 13 Dec 2014 00:58:19 +0000 (16:58 -0800)]
ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
This is a highly-contrived scenario. But, a single shmdt() call can be
induced in to unmapping memory from mulitple shm segments. Example code
is here:
http://www.sr71.net/~dave/intel/shmfun.c
The fix is pretty simple: Record the 'struct file' for the first VMA we
encounter and then stick to it. Decline to unmap anything not from the
same file and thus the same segment.
I found this by inspection and the odds of anyone hitting this in practice
are pretty darn small.
Lightly tested, but it's a pretty small patch.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Manfred Spraul [Sat, 13 Dec 2014 00:58:17 +0000 (16:58 -0800)]
ipc/msg: increase MSGMNI, remove scaling
SysV can be abused to allocate locked kernel memory. For most systems, a
small limit doesn't make sense, see the discussion with regards to SHMMAX.
Therefore: increase MSGMNI to the maximum supported.
And: If we ignore the risk of locking too much memory, then an automatic
scaling of MSGMNI doesn't make sense. Therefore the logic can be removed.
The code preserves auto_msgmni to avoid breaking any user space applications
that expect that the value exists.
Notes:
1) If an administrator must limit the memory allocations, then he can set
MSGMNI as necessary.
Or he can disable sysv entirely (as e.g. done by Android).
2) MSGMAX and MSGMNB are intentionally not increased, as these values are used
to control latency vs. throughput:
If MSGMNB is large, then msgsnd() just returns and more messages can be queued
before a task switch to a task that calls msgrcv() is forced.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Manfred Spraul [Sat, 13 Dec 2014 00:58:14 +0000 (16:58 -0800)]
ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM
a)
SysV can be abused to allocate locked kernel memory. For most systems, a
small limit doesn't make sense, see the discussion with regards to SHMMAX.
Therefore: Increase the sysv sem limits so that all known applications
will work with these defaults.
b)
With regards to the maximum supported:
Some of the specified hard limits are not correct anymore, therefore the
patch updates the documentation.
- SEMMNI must stay below IPCMNI, which is 32768.
As for SHMMAX: Stay a bit below this limit.
- SEMMSL was limited to 8k, to ensure that the kmalloc for the kernel array
was limited to 16 kB (order=2)
This doesn't apply anymore:
- the allocation size isn't sizeof(short)*nsems anymore.
- ipc_alloc falls back to vmalloc
- SEMOPM should stay below 1000, to limit the kmalloc in semtimedop() to an
order=1 allocation.
Therefore: Leave it at 500 (order=0 allocation).
Note:
If an administrator must limit the memory allocations, then he can set the
values as necessary.
Or he can disable sysv entirely (as e.g. done by Android).
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Manfred Spraul [Sat, 13 Dec 2014 00:58:11 +0000 (16:58 -0800)]
ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
When I fixed bugs in the sem_lock() logic, I was more conservative than
necessary. Therefore it is safe to replace the smp_mb() with smp_rmb().
And: With smp_rmb(), semop() syscalls are up to 10% faster.
The race we must protect against is:
sem->lock is free
sma->complex_count = 0
sma->sem_perm.lock held by thread B
thread A:
A: spin_lock(&sem->lock)
B: sma->complex_count++; (now 1)
B: spin_unlock(&sma->sem_perm.lock);
A: spin_is_locked(&sma->sem_perm.lock);
A: XXXXX memory barrier
A: if (sma->complex_count == 0)
Thread A must read the increased complex_count value, i.e. the read must
not be reordered with the read of sem_perm.lock done by spin_is_locked().
Since it's about ordering of reads, smp_rmb() is sufficient.
[akpm@linux-foundation.org: update sem_lock() comment, from Davidlohr]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Haesung Kim [Sat, 13 Dec 2014 00:58:08 +0000 (16:58 -0800)]
lib/decompress.c: consistency of compress formats for kernel image
Magic number of compress formats for kernel image is defined by two bytes.
These numbers are written in hexadecimal number, nevertheless magic
number for only gunzip is written in octal number. The formats should be
consistent for readability. Therefore, magic numbers for gunzip are also
defined by hexadecimal number.
Signed-off-by: Haesung Kim <matia.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Sat, 13 Dec 2014 00:58:05 +0000 (16:58 -0800)]
decompress_bunzip2: off by one in get_next_block()
"origPtr" is used as an offset into the bd->dbuf[] array. That array is
allocated in start_bunzip() and has "bd->dbufSize" number of elements so
the test here should be >= instead of >.
Later we check "origPtr" again before using it as an offset so I don't
know if this bug can be triggered in real life.
Fixes: bc22c17e12c1 ('bzip2/lzma: library support for gzip, bzip2 and lzma decompression')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 13 Dec 2014 00:58:03 +0000 (16:58 -0800)]
usr/Kconfig: make initrd compression algorithm selection not expert
The kernel has support for (nearly) every compression algorithm known to
man, each to handle some particular microscopic niche.
Unfortunately all of these always get compiled in if you want to support
INITRDs, and can be only disabled when CONFIG_EXPERT is set.
I don't see why I need to set EXPERT just to properly configure the initrd
compression algorithms, and not always include every possible algorithm
Usually the initrd is just compressed with gzip anyways, at least that's
true on all distributions I use.
Remove the dependencies for initrd compression on CONFIG_EXPERT.
Make the various options just default y, which should be good enough to
not break any previous configuration.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Monakhov [Sat, 13 Dec 2014 00:58:00 +0000 (16:58 -0800)]
fault-inject: add ratelimit option
Current debug levels are not optimal. Especially if one want to provoke
big numbers of faults(broken device simulator) then any verbose level will
produce giant numbers of identical logging messages. Let's add ratelimit
parameter for that purpose.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Monakhov [Sat, 13 Dec 2014 00:57:57 +0000 (16:57 -0800)]
ratelimit: add initialization macro
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Sat, 13 Dec 2014 00:57:55 +0000 (16:57 -0800)]
fs/affs/file.c: remove obsolete pagesize check
linux kernel doesn't manage page sizes below 4kb.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Sat, 13 Dec 2014 00:57:52 +0000 (16:57 -0800)]
fs/affs/file.c: add support to O_DIRECT
Based on ext2_direct_IO
Tested with O_DIRECT file open and sysbench/mariadb with 1% written
queries improvement (update_non_index test) on a volume created with
mkaffs.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Sat, 13 Dec 2014 00:57:49 +0000 (16:57 -0800)]
fs/affs/amigaffs.c: use va_format instead of buffer/vnsprintf
-Remove ErrorBuffer and use %pV
-Add __printf to enable argument mistmatch warnings
Original patch by Joe Perches.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Sat, 13 Dec 2014 00:57:47 +0000 (16:57 -0800)]
fs/affs/file.c: forward declaration clean-up
-Move file_operations to avoid forward declarations.
-Remove unused declarations.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Riku Voipio [Sat, 13 Dec 2014 00:57:44 +0000 (16:57 -0800)]
gcov: enable GCOV_PROFILE_ALL from ARCH Kconfigs
Following the suggestions from Andrew Morton and Stephen Rothwell,
Dont expand the ARCH list in kernel/gcov/Kconfig. Instead,
define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures
can enable.
set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was
previously allowed + ARM64 which I tested.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masanari Iida [Sat, 13 Dec 2014 00:57:41 +0000 (16:57 -0800)]
kexec: remove unnecessary KERN_ERR from kexec.c
Remove unnecessary KERN_ERR from pr_err() within kexec.c.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Drysdale [Sat, 13 Dec 2014 00:57:39 +0000 (16:57 -0800)]
sparc: hook up execveat system call
Signed-off-by: David Drysdale <drysdale@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Drysdale [Sat, 13 Dec 2014 00:57:36 +0000 (16:57 -0800)]
syscalls: add selftest for execveat(2)
Signed-off-by: David Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Drysdale [Sat, 13 Dec 2014 00:57:33 +0000 (16:57 -0800)]
x86: hook up execveat system call
Hook up x86-64, i386 and x32 ABIs.
Signed-off-by: David Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Drysdale [Sat, 13 Dec 2014 00:57:29 +0000 (16:57 -0800)]
syscalls: implement execveat() system call
This patchset adds execveat(2) for x86, and is derived from Meredydd
Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528).
The primary aim of adding an execveat syscall is to allow an
implementation of fexecve(3) that does not rely on the /proc filesystem,
at least for executables (rather than scripts). The current glibc version
of fexecve(3) is implemented via /proc, which causes problems in sandboxed
or otherwise restricted environments.
Given the desire for a /proc-free fexecve() implementation, HPA suggested
(https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be
an appropriate generalization.
Also, having a new syscall means that it can take a flags argument without
back-compatibility concerns. The current implementation just defines the
AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be
added in future -- for example, flags for new namespaces (as suggested at
https://lkml.org/lkml/2006/7/11/474).
Related history:
- https://lkml.org/lkml/2006/12/27/123 is an example of someone
realizing that fexecve() is likely to fail in a chroot environment.
- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered
documenting the /proc requirement of fexecve(3) in its manpage, to
"prevent other people from wasting their time".
- https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a
problem where a process that did setuid() could not fexecve()
because it no longer had access to /proc/self/fd; this has since
been fixed.
This patch (of 4):
Add a new execveat(2) system call. execveat() is to execve() as openat()
is to open(): it takes a file descriptor that refers to a directory, and
resolves the filename relative to that.
In addition, if the filename is empty and AT_EMPTY_PATH is specified,
execveat() executes the file to which the file descriptor refers. This
replicates the functionality of fexecve(), which is a system call in other
UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and
so relies on /proc being mounted).
The filename fed to the executed program as argv[0] (or the name of the
script fed to a script interpreter) will be of the form "/dev/fd/<fd>"
(for an empty filename) or "/dev/fd/<fd>/<filename>", effectively
reflecting how the executable was found. This does however mean that
execution of a script in a /proc-less environment won't work; also, script
execution via an O_CLOEXEC file descriptor fails (as the file will not be
accessible after exec).
Based on patches by Meredydd Luff.
Signed-off-by: David Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Namjae Jeon [Sat, 13 Dec 2014 00:57:26 +0000 (16:57 -0800)]
fat: fix data past EOF resulting from fsx testsuite
When running FSX with direct I/O mode, fsx resulted in DATA past EOF issues.
fsx ./file2 -Z -r 4096 -w 4096
...
..
truncating to largest ever: 0x907c
fallocating to largest ever: 0x11137
truncating to largest ever: 0x2c6fe
truncating to largest ever: 0x2cfdf
fallocating to largest ever: 0x40000
Mapped Read: non-zero data past EOF (0x18628) page offset 0x629 is 0x2a4e
...
..
The reason being, it is doing a truncate down, but the zeroing does not
happen on the last block boundary when offset is not aligned. Even though
it calls truncate_setsize()->truncate_inode_pages()->
truncate_inode_pages_range() and considers the partial zeroout but it
retrieves the page using find_lock_page() - which only looks the page in
the cache. So, zeroing out does not happen in case of direct IO.
Make a truncate page based around block_truncate_page for FAT filesystem
and invoke that helper to zerout in case the offset is not aligned with
the blocksize.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Sat, 13 Dec 2014 00:57:24 +0000 (16:57 -0800)]
befs: remove dead code
Coverity id:
1042674
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heesub Shin [Sat, 13 Dec 2014 00:57:21 +0000 (16:57 -0800)]
mm/zbud: init user ops only when it is needed
When zbud is initialized through the zpool wrapper, pool->ops which
points to user-defined operations is always set regardless of whether it
is specified from the upper layer. This causes zbud_reclaim_page() to
iterate its loop for evicting pool pages out without any gain.
This patch sets the user-defined ops only when it is needed, so that
zbud_reclaim_page() can bail out the reclamation loop earlier if there
is no user-defined operations specified.
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Sunae Seo <sunae.seo@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Markus Elfring [Sat, 13 Dec 2014 00:57:18 +0000 (16:57 -0800)]
mm/zswap: delete unnecessary check before calling free_percpu()
free_percpu() tests whether its argument is NULL and then returns
immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mahendran Ganesh [Sat, 13 Dec 2014 00:57:15 +0000 (16:57 -0800)]
mm/zswap: add __init to some functions in zswap
zswap_cpu_init/zswap_comp_exit/zswap_entry_cache_create is only called by
__init init_zswap()
Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ganesh Mahendran [Sat, 13 Dec 2014 00:57:13 +0000 (16:57 -0800)]
zram: use DEVICE_ATTR_[RW|RO|WO] to define zram sys device attribute
In current zram, we use DEVICE_ATTR() to define sys device attributes.
SO, we need to set (S_IRUGO | S_IWUSR) permission and other arguments
manually. Linux already provids the macro DEVICE_ATTR_[RW|RO|WO] to
define sys device attribute. It is simple and readable.
This patch uses kernel defined macro DEVICE_ATTR_[RW|RO|WO] to define
zram device attribute.
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ganesh Mahendran [Sat, 13 Dec 2014 00:57:10 +0000 (16:57 -0800)]
mm/zsmalloc: allocate exactly size of struct zs_pool
In zs_create_pool(), we allocate memory more then sizeof(struct zs_pool)
ovhd_size = roundup(sizeof(*pool), PAGE_SIZE);
This patch allocate memory of exactly needed size.
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ganesh Mahendran [Sat, 13 Dec 2014 00:57:07 +0000 (16:57 -0800)]
mm/zsmalloc: avoid duplicate assignment of prev_class
In zs_create_pool(), prev_class is assigned (ZS_SIZE_CLASSES - 1) times.
And the prev_class only references to the previous size_class. So we do
not need unnecessary assignement.
This patch assigns *prev_class* when a new size_class structure is
allocated and uses prev_class to check whether the first class has been
allocated.
[akpm@linux-foundation.org: remove now-unused ZS_SIZE_CLASSES]
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mahendran Ganesh [Sat, 13 Dec 2014 00:57:04 +0000 (16:57 -0800)]
mm/zram: correct ZRAM_ZERO flag bit position
In struct zram_table_entry, the element *value* contains obj size and obj
zram flags. Bit 0 to bit (ZRAM_FLAG_SHIFT - 1) represent obj size, and
bit ZRAM_FLAG_SHIFT to the highest bit of unsigned long represent obj
zram_flags. So the first zram flag(ZRAM_ZERO) should be from
ZRAM_FLAG_SHIFT instead of (ZRAM_FLAG_SHIFT + 1).
This patch fixes this cosmetic issue.
Also fix a typo, "page in now accessed" -> "page is now accessed"
Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mahendran Ganesh [Sat, 13 Dec 2014 00:57:01 +0000 (16:57 -0800)]
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE
I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim
found zsmalloc even does not support allocating an obj with the size of
ZS_MAX_ALLOC_SIZE in some situations.
For example:
In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then:
ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by:
MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE)
ZS_SIZE_CLASS_DELTA is 256 bytes
So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) /
ZS_SIZE_CLASS_DELTA + 1
= 256
In zs_create_pool(), the max size obj which can be allocated will be:
ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312
We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT
allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper
users we can do.
[1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html
[2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html
This patch fixes this issue by dynamiclly calculating zs_size_classes when
module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the
max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it.
[akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability]
Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 13 Dec 2014 00:56:58 +0000 (16:56 -0800)]
zsmalloc: correct fragile [kmap|kunmap]_atomic use
The kunmap_atomic should use virtual address getting by kmap_atomic.
However, some pieces of code in zsmalloc uses modified address, not the
one got by kmap_atomic for kunmap_atomic.
It's okay for working because zsmalloc modifies the address inner
PAGE_SIZE bounday so it works with current kmap_atomic's implementation.
But it's still fragile with potential changing of kmap_atomic so let's
correct it.
I got a subtle bug when I implemented a new feature of zsmalloc
(compaction) due to a link's mishandling (the link was over page
boundary). Although it was totally my mistake, it took a while to find
the cause because an unpredictable kmapped address was unmapped causing an
almost random crash.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergey Senozhatsky [Sat, 13 Dec 2014 00:56:56 +0000 (16:56 -0800)]
zsmalloc: fix zs_init cpu notifier error handling
Mahendran Ganesh reported that zpool-enabled zsmalloc should not call
zpool_unregister_driver() from zs_init() if cpu notifier registration has
failed, because error handling is performed before we register the driver
via zpool_register_driver() call.
Factor out cpu notifier registration and unregistration code and fix
zs_init() error handling.
link: http://lkml.iu.edu//hypermail/linux/kernel/1411.1/04156.html
[akpm@linux-foundation.org: squash bogus gcc warning]
[akpm@linux-foundation.org: use __init and __exit]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
karam.lee [Sat, 13 Dec 2014 00:56:53 +0000 (16:56 -0800)]
zram: implement rw_page operation of zram
This patch implements rw_page operation for zram block device.
I implemented the feature in zram and tested it. Test bed was the G2, LG
electronic mobile device, whtich has msm8974 processor and 2GB memory.
With a memory allocation test program consuming memory, the system
generates swap.
Operating time of swap_write_page() was measured.
--------------------------------------------------
| | operating time | improvement |
| | (20 runs average) | |
--------------------------------------------------
|with patch | 1061.15 us | +2.4% |
--------------------------------------------------
|without patch| 1087.35 us | |
--------------------------------------------------
Each test(with paged_io,with BIO) result set shows normal distribution and
has equal variance. I mean the two values are valid result to compare. I
can say operation with paged I/O(without BIO) is faster 2.4% with
confidence level 95%.
[minchan@kernel.org: make rw_page opeartion return 0]
[minchan@kernel.org: rely on the bi_end_io for zram_rw_page fails]
[sergey.senozhatsky@gmail.com: code cleanup]
[minchan@kernel.org: add comment]
Signed-off-by: karam.lee <karam.lee@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: <seungho1.park@lge.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
karam.lee [Sat, 13 Dec 2014 00:56:50 +0000 (16:56 -0800)]
zram: change parameter from vaild_io_request()
This patch changes parameter of valid_io_request for common usage. The
purpose of valid_io_request() is to determine if bio request is valid or
not.
This patch use I/O start address and size instead of a BIO parameter for
common usage.
Signed-off-by: karam.lee <karam.lee@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: <seungho1.park@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
karam.lee [Sat, 13 Dec 2014 00:56:47 +0000 (16:56 -0800)]
zram: remove bio parameter from zram_bvec_rw()
Recently rw_page block device operation has been added. This patchset
implements rw_page operation for zram block device and does some clean-up.
This patch (of 3):
Remove an unnecessary parameter(bio) from zram_bvec_rw() and
zram_bvec_read(). zram_bvec_read() doesn't use a bio parameter, so remove
it. zram_bvec_rw() calls a read/write operation not using bio, so a rw
parameter replaces a bio parameter.
Signed-off-by: karam.lee <karam.lee@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: <seungho1.park@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Sat, 13 Dec 2014 00:56:44 +0000 (16:56 -0800)]
zsmalloc: merge size_class to reduce fragmentation
zsmalloc has many size_classes to reduce fragmentation and they are in 16
bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And,
zsmalloc has constraint that each zspage has 4 pages at maximum.
In this situation, we can see interesting aspect. Let's think about
size_class for 1488, 1472, ..., 1376. To prevent external fragmentation,
they uses 4 pages per zspage and so all they can contain 11 objects at
maximum.
16384 (4096 * 4) = 1488 * 11 + remains
16384 (4096 * 4) = 1472 * 11 + remains
16384 (4096 * 4) = ...
16384 (4096 * 4) = 1376 * 11 + remains
It means that they have same characteristics and classification between
them isn't needed. If we use one size_class for them, we can reduce
fragementation and save some memory since both the 1488 and 1472 sized
classes can only fit 11 objects into 4 pages, and an object that's 1472
bytes can fit into an object that's 1488 bytes, merging these classes to
always use objects that are 1488 bytes will reduce the total number of
size classes. And reducing the total number of size classes reduces
overall fragmentation, because a wider range of compressed pages can fit
into a single size class, leaving less unused objects in each size class.
For this purpose, this patch implement size_class merging. If there is
size_class that have same pages_per_zspage and same number of objects per
zspage with previous size_class, we don't create new size_class. Instead,
we use previous, same characteristic size_class. With this way, above
example sizes (1488, 1472, ..., 1376) use just one size_class so we can
get much more memory utilization.
Below is result of my simple test.
TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel
source code, remove directory in descending order in size. (drivers arch
fs sound include net Documentation firmware kernel tools)
Each line represents orig_data_size, compr_data_size, mem_used_total,
fragmentation overhead (mem_used - compr_data_size) and overhead ratio
(overhead to compr_data_size), respectively, after untar and remove
operation is executed.
* untar-nomerge.out
orig_size compr_size used_size overhead overhead_ratio
525.88MB 199.16MB 210.23MB 11.08MB 5.56%
288.32MB 97.43MB 105.63MB 8.20MB 8.41%
177.32MB 61.12MB 69.40MB 8.28MB 13.55%
146.47MB 47.32MB 56.10MB 8.78MB 18.55%
124.16MB 38.85MB 48.41MB 9.55MB 24.58%
103.93MB 31.68MB 40.93MB 9.25MB 29.21%
84.34MB 22.86MB 32.72MB 9.86MB 43.13%
66.87MB 14.83MB 23.83MB 9.00MB 60.70%
60.67MB 11.11MB 18.60MB 7.49MB 67.48%
55.86MB 8.83MB 16.61MB 7.77MB 88.03%
53.32MB 8.01MB 15.32MB 7.31MB 91.24%
* untar-merge.out
orig_size compr_size used_size overhead overhead_ratio
526.23MB 199.18MB 209.81MB 10.64MB 5.34%
288.68MB 97.45MB 104.08MB 6.63MB 6.80%
177.68MB 61.14MB 66.93MB 5.79MB 9.47%
146.83MB 47.34MB 52.79MB 5.45MB 11.51%
124.52MB 38.87MB 44.30MB 5.43MB 13.96%
104.29MB 31.70MB 36.83MB 5.13MB 16.19%
84.70MB 22.88MB 27.92MB 5.04MB 22.04%
67.11MB 14.83MB 19.26MB 4.43MB 29.86%
60.82MB 11.10MB 14.90MB 3.79MB 34.17%
55.90MB 8.82MB 12.61MB 3.79MB 42.97%
53.32MB 8.01MB 11.73MB 3.73MB 46.53%
As you can see above result, merged one has better utilization (overhead
ratio, 5th column) and uses less memory (mem_used_total, 3rd column).
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: <juno.choi@lge.com>
Cc: "seungho1.park" <seungho1.park@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rickard Strandqvist [Sat, 13 Dec 2014 00:56:41 +0000 (16:56 -0800)]
mm/memcontrol.c: remove unused mem_cgroup_lru_names_not_uptodate()
Remove unused mem_cgroup_lru_names_not_uptodate() and move BUILD_BUG_ON()
to the beginning of memcg_stat_show().
This was partially found by using a static code analysis program called
cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Sat, 13 Dec 2014 00:56:38 +0000 (16:56 -0800)]
memcg: fix possible use-after-free in memcg_kmem_get_cache()
Suppose task @t that belongs to a memory cgroup @memcg is going to
allocate an object from a kmem cache @c. The copy of @c corresponding to
@memcg, @mc, is empty. Then if kmem_cache_alloc races with the memory
cgroup destruction we can access the memory cgroup's copy of the cache
after it was destroyed:
CPU0 CPU1
---- ----
[ current=@t
@mc->memcg_params->nr_pages=0 ]
kmem_cache_alloc(@c):
call memcg_kmem_get_cache(@c);
proceed to allocation from @mc:
alloc a page for @mc:
...
move @t from @memcg
destroy @memcg:
mem_cgroup_css_offline(@memcg):
memcg_unregister_all_caches(@memcg):
kmem_cache_destroy(@mc)
add page to @mc
We could fix this issue by taking a reference to a per-memcg cache, but
that would require adding a per-cpu reference counter to per-memcg caches,
which would look cumbersome.
Instead, let's take a reference to a memory cgroup, which already has a
per-cpu reference counter, in the beginning of kmem_cache_alloc to be
dropped in the end, and move per memcg caches destruction from css offline
to css free. As a side effect, per-memcg caches will be destroyed not one
by one, but all at once when the last page accounted to the memory cgroup
is freed. This doesn't sound as a high price for code readability though.
Note, this patch does add some overhead to the kmem_cache_alloc hot path,
but it is pretty negligible - it's just a function call plus a per cpu
counter decrement, which is comparable to what we already have in
memcg_kmem_get_cache. Besides, it's only relevant if there are memory
cgroups with kmem accounting enabled. I don't think we can find a way to
handle this race w/o it, because alloc_page called from kmem_cache_alloc
may sleep so we can't flush all pending kmallocs w/o reference counting.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michele Curti [Sat, 13 Dec 2014 00:56:35 +0000 (16:56 -0800)]
mm/memcontrol.c: fix defined but not used compiler warning
test_mem_cgroup_node_reclaimable() is used only when MAX_NUMNODES > 1, so
move it into the compiler if statement
[akpm@linux-foundation.org: clean up layout]
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Sat, 13 Dec 2014 00:56:33 +0000 (16:56 -0800)]
mm: fadvise: document the fadvise(FADV_DONTNEED) behaviour for partial pages
A random seek IO benchmark appeared to regress because of a change to
readahead but the real problem was the benchmark. To ensure the IO
request accesssed disk, it used fadvise(FADV_DONTNEED) on a block boundary
(512K) but the hint is ignored by the kernel. This is correct but not
necessarily obvious behaviour. As much as I dislike comment patches, the
explanation for this behaviour predates current git history. Clarify why
it behaves like this in case someone "fixes" fadvise or readahead for the
wrong reasons.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Vyukov [Sat, 13 Dec 2014 00:56:30 +0000 (16:56 -0800)]
mm/vmalloc.c: fix memory ordering bug
Read memory barriers must follow the read operations.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Sat, 13 Dec 2014 00:56:27 +0000 (16:56 -0800)]
oom: kill the insufficient and no longer needed PT_TRACE_EXIT check
After the previous patch we can remove the PT_TRACE_EXIT check in
oom_scan_process_thread(), it was added to handle the case when the
coredumping was "frozen" by ptrace, but it doesn't really work. If
nothing else, we would need to check all threads which could share the
same ->mm to make it more or less correct.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Sat, 13 Dec 2014 00:56:24 +0000 (16:56 -0800)]
oom: don't assume that a coredumping thread will exit soon
oom_kill.c assumes that PF_EXITING task should exit and free the memory
soon. This is wrong in many ways and one important case is the coredump.
A task can sleep in exit_mm() "forever" while the coredumping sub-thread
can need more memory.
Change the PF_EXITING checks to take SIGNAL_GROUP_COREDUMP into account,
we add the new trivial helper for that.
Note: this is only the first step, this patch doesn't try to solve other
problems. The SIGNAL_GROUP_COREDUMP check is obviously racy, a task can
participate in coredump after it was already observed in PF_EXITING state,
so TIF_MEMDIE (which also blocks oom-killer) still can be wrongly set.
fatal_signal_pending() can be true because of SIGNAL_GROUP_COREDUMP so
out_of_memory() and mem_cgroup_out_of_memory() shouldn't blindly trust it.
And even the name/usage of the new helper is confusing, an exiting thread
can only free its ->mm if it is the only/last task in thread group.
[akpm@linux-foundation.org: add comment]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhong Hongbo [Sat, 13 Dec 2014 00:56:21 +0000 (16:56 -0800)]
mm: remove the highmem zones' memmap in the highmem zone
Since
01cefaef40c4 ("mm: provide more accurate estimation
of pages occupied by memmap") allocate the pages from lowmem for the
highmem zones' memmap. So It is not need to reserver the memmap's for
the highmem.
A 2G DDR3 for the arm platform:
On node 0 totalpages: 524288
free_area_init_node: node 0, pgdat
80ccd380, node_mem_map
80d38000
DMA zone: 3568 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 456704 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 67584 pages, LIFO batch:15
On node 0 totalpages: 524288
free_area_init_node: node 0, pgdat
80cd6f40, node_mem_map
80d42000
DMA zone: 3568 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 456704 pages, LIFO batch:31
HighMem zone: 67584 pages, LIFO batch:15
Signed-off-by: Hongbo Zhong <hongbo.zhong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Sat, 13 Dec 2014 00:56:19 +0000 (16:56 -0800)]
mm: unmapped page migration avoid unmap+remap overhead
Page migration's __unmap_and_move(), and rmap's try_to_unmap(), were
created for use on pages almost certainly mapped into userspace. But
nowadays compaction often applies them to unmapped page cache pages: which
may exacerbate contention on i_mmap_rwsem quite unnecessarily, since
try_to_unmap_file() makes no preliminary page_mapped() check.
Now check page_mapped() in __unmap_and_move(); and avoid repeating the
same overhead in rmap_walk_file() - don't remove_migration_ptes() when we
never inserted any.
(The PageAnon(page) comment blocks now look even sillier than before, but
clean that up on some other occasion. And note in passing that
try_to_unmap_one() does not use a migration entry when PageSwapCache, so
remove_migration_ptes() will then not update that swap entry to newpage
pte: not a big deal, but something else to clean up later.)
Davidlohr remarked in "mm,fs: introduce helpers around the i_mmap_mutex"
conversion to i_mmap_rwsem, that "The biggest winner of these changes is
migration": a part of the reason might be all of that unnecessary taking
of i_mmap_mutex in page migration; and it's rather a shame that I didn't
get around to sending this patch in before his - this one is much less
useful after Davidlohr's conversion to rwsem, but still good.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Sat, 13 Dec 2014 00:56:16 +0000 (16:56 -0800)]
fs, seq_file: fallback to vmalloc instead of oom kill processes
Since commit
058504edd026 ("fs/seq_file: fallback to vmalloc allocation"),
seq_buf_alloc() falls back to vmalloc() when the kmalloc() for contiguous
memory fails. This was done to address order-4 slab allocations for
reading /proc/stat on large machines and noticed because
PAGE_ALLOC_COSTLY_ORDER < 4, so there is no infinite loop in the page
allocator when allocating new slab for such high-order allocations.
Contiguous memory isn't necessary for caller of seq_buf_alloc(), however.
Other GFP_KERNEL high-order allocations that are <=
PAGE_ALLOC_COSTLY_ORDER will simply loop forever in the page allocator and
oom kill processes as a result.
We don't want to kill processes so that we can allocate contiguous memory
in situations when contiguous memory isn't necessary.
This patch does the kmalloc() allocation with __GFP_NORETRY for high-order
allocations. This still utilizes memory compaction and direct reclaim in
the allocation path, the only difference is that it will fail immediately
instead of oom kill processes when out of memory.
[akpm@linux-foundation.org: add comment]
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Sat, 13 Dec 2014 00:56:13 +0000 (16:56 -0800)]
mm: vmscan: invoke slab shrinkers from shrink_zone()
The slab shrinkers are currently invoked from the zonelist walkers in
kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the
eligible LRU pages and assemble a nodemask to pass to NUMA-aware
shrinkers, which then again have to walk over the nodemask. This is
redundant code, extra runtime work, and fairly inaccurate when it comes to
the estimation of actually scannable LRU pages. The code duplication will
only get worse when making the shrinkers cgroup-aware and requiring them
to have out-of-band cgroup hierarchy walks as well.
Instead, invoke the shrinkers from shrink_zone(), which is where all
reclaimers end up, to avoid this duplication.
Take the count for eligible LRU pages out of get_scan_count(), which
considers many more factors than just the availability of swap space, like
zone_reclaimable_pages() currently does. Accumulate the number over all
visited lruvecs to get the per-zone value.
Some nodes have multiple zones due to memory addressing restrictions. To
avoid putting too much pressure on the shrinkers, only invoke them once
for each such node, using the class zone of the allocation as the pivot
zone.
For now, this integrates the slab shrinking better into the reclaim logic
and gets rid of duplicative invocations from kswapd, direct reclaim, and
zone reclaim. It also prepares for cgroup-awareness, allowing
memcg-capable shrinkers to be added at the lruvec level without much
duplication of both code and runtime work.
This changes kswapd behavior, which used to invoke the shrinkers for each
zone, but with scan ratios gathered from the entire node, resulting in
meaningless pressure quantities on multi-zone nodes.
Zone reclaim behavior also changes. It used to shrink slabs until the
same amount of pages were shrunk as were reclaimed from the LRUs. Now it
merely invokes the shrinkers once with the zone's scan ratio, which makes
the shrinkers go easier on caches that implement aging and would prefer
feeding back pressure from recently used slab objects to unused LRU pages.
[vdavydov@parallels.com: assure class zone is populated]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Sat, 13 Dec 2014 00:56:10 +0000 (16:56 -0800)]
mm,vmacache: count number of system-wide flushes
These flushes deal with sequence number overflows, such as for long lived
threads. These are rare, but interesting from a debugging PoV. As such,
display the number of flushes when vmacache debugging is enabled.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Sat, 13 Dec 2014 00:56:07 +0000 (16:56 -0800)]
Documentation: add new page_owner document
page owner is for the tracking about who allocated each page. This
document explains what is the page owner feature and what is the merit of
it. And, simple HOW-TO is also explained. See the document for detailed
information.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Sat, 13 Dec 2014 00:56:04 +0000 (16:56 -0800)]
mm/page_owner: correct owner information for early allocated pages
Extended memory to store page owner information is initialized some time
later than that page allocator starts. Until initialization, many pages
can be allocated and they have no owner information. This make debugging
using page owner harder, so some fixup will be helpful.
This patch fixes up this situation by setting fake owner information
immediately after page extension is initialized. Information doesn't tell
the right owner, but, at least, it can tell whether page is allocated or
not, more correctly.
On my testing, this patch catches 13343 early allocated pages, although
they are mostly allocated from page extension feature. Anyway, after
then, there is no page left that it is allocated and has no page owner
flag.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Sat, 13 Dec 2014 00:56:01 +0000 (16:56 -0800)]
mm/page_owner: keep track of page owners
This is the page owner tracking code which is introduced so far ago. It
is resident on Andrew's tree, though, nobody tried to upstream so it
remain as is. Our company uses this feature actively to debug memory leak
or to find a memory hogger so I decide to upstream this feature.
This functionality help us to know who allocates the page. When
allocating a page, we store some information about allocation in extra
memory. Later, if we need to know status of all pages, we can get and
analyze it from this stored information.
In previous version of this feature, extra memory is statically defined in
struct page, but, in this version, extra memory is allocated outside of
struct page. It enables us to turn on/off this feature at boottime
without considerable memory waste.
Although we already have tracepoint for tracing page allocation/free,
using it to analyze page owner is rather complex. We need to enlarge the
trace buffer for preventing overlapping until userspace program launched.
And, launched program continually dump out the trace buffer for later
analysis and it would change system behaviour with more possibility rather
than just keeping it in memory, so bad for debug.
Moreover, we can use page_owner feature further for various purposes. For
example, we can use it for fragmentation statistics implemented in this
patch. And, I also plan to implement some CMA failure debugging feature
using this interface.
I'd like to give the credit for all developers contributed this feature,
but, it's not easy because I don't know exact history. Sorry about that.
Below is people who has "Signed-off-by" in the patches in Andrew's tree.
Contributor:
Alexander Nyberg <alexn@dsv.su.se>
Mel Gorman <mgorman@suse.de>
Dave Hansen <dave@linux.vnet.ibm.com>
Minchan Kim <minchan@kernel.org>
Michal Nazarewicz <mina86@mina86.com>
Andrew Morton <akpm@linux-foundation.org>
Jungsoo Son <jungsoo.son@lge.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Sat, 13 Dec 2014 00:55:58 +0000 (16:55 -0800)]
stacktrace: introduce snprint_stack_trace for buffer output
Current stacktrace only have the function for console output. page_owner
that will be introduced in following patch needs to print the output of
stacktrace into the buffer for our own output format so so new function,
snprint_stack_trace(), is needed.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Sat, 13 Dec 2014 00:55:55 +0000 (16:55 -0800)]
mm/nommu: use alloc_pages_exact() rather than its own implementation
do_mmap_private() in nommu.c try to allocate physically contiguous pages
with arbitrary size in some cases and we now have good abstract function
to do exactly same thing, alloc_pages_exact(). So, change to use it.
There is no functional change. This is the preparation step for support
page owner feature accurately.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / openwrt / staging / blogic.git / log