drm/i915: Increase LSPCON timeout

100 ms is not enough time for the LSPCON adapter on Intel NUC devices to
settle. This causes dropped display modes at boot or screen reconfiguration.
Empirical testing can reproduce the error up to a timeout of 190 ms. Basic
boot and stress testing at 200 ms has not (yet) failed.

Increase timeout to 400 ms to get some margin of error.

Changes from v1:
The initial suggestion of 1000 ms was lowered due to concerns about delaying
valid timeout cases.
Update patch metadata.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107503
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1570392
Fixes: 357c0ae9198a ("drm/i915/lspcon: Wait for expected LSPCON mode to settle")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Fredrik Schön <fredrik.schon@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180817200728.8154-1-fredrik.schon@gmail.com

drm/i915: Verify power domains after enabling them

After
commit 2cd9a689e97b ("drm/i915: Refactor intel_display_set_init_power() logic")
it makes more sense to check the power domain/well refcounts after
enabling the power domains functionality. Before that it's guaranteed
that most power wells (in the INIT domain) will have a reference held,
so not an interesting state.

While at it also add the check after the init_hw/fini_hw, disable and
suspend/resume steps. Make the test optional on a Kconfig option since
it may add substantial overhead: on VLV/CHV the corresponding PUNIT reg
access for each power well may take up to 20ms.

v2:
- Add the state check to more spots. (Chris)

v3:
- During suspend check the state before deiniting display core.
  Afterwards DC states are disabled (and so the dc_off power well is
  enabled) even though we don't hold a reference on it.
- Do the test conditionally based on a new Kconfig option. (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Add DRM_I915_DEBUG_RUNTIME_PM to welcome messages]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180817145837.26592-1-imre.deak@intel.com

drm/i915: Do not redefine the has_csr parameter.

Let us reuse the already defined has_csr check and not
redefine it.

The main difference is that in effect this will flip .has_csr to 1
(via GEN9_FEATURES which GEN11_FEATURES pulls in).

Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=107382
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1534527210-16841-1-git-send-email-anusha.srivatsa@intel.com

drm/i915/execlists: Include reset depth in traces

Show the reset depth (the tasklet disable count) in the GEM_TRACE to
indicate when we might not expect tasklets to be flushed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180815135827.25869-1-chris@chris-wilson.co.uk

drm/i915: remove confusing GPIO vs PCH_GPIO

Instead of defining all registers twice, define just a PCH_GPIO_BASE
that has the same address as PCH_GPIO_A and use that to calculate all
the others. This also brings VLV and !HAS_GMCH_DISPLAY in line, doing
the same thing.

v2: Fix GMBUS registers to be relative to gpio base; create GPIO()
    macro to return a particular gpio address and move the enum out of
    i915_reg.h (suggested by Jani)

v3: Move base offset inside the GPIO() macro so the GMBUS defines don't
    actually need to be changed (suggested by Daniel/Ville)

v4: Move definition of i915_gpio to intel_display.h and remove
    GMBUS/GPIO handling from gvt since now they have their own
    defines.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727193647.8639-3-lucas.demarchi@intel.com

drm/i915/gvt: use its own define for gpio

The definition on i915_reg.h is going to change to depend on
dev_priv->gpio_mmio_base being properly initialized. Define our own
macros since init_generic_mmio_info() is called before than
gpio_mmio_base being set.

Cc: intel-gvt-dev@lists.freedesktop.org
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727193647.8639-2-lucas.demarchi@intel.com

drm/i915: make PCH_GMBUS* definitions private to gvt

This is the only place that they are being used - the others use the
GMBUS* macros that rely on dev_priv being already properly initialized.

Cc: intel-gvt-dev@lists.freedesktop.org
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727193647.8639-1-lucas.demarchi@intel.com

drm/i915: Refactor intel_display_set_init_power() logic

The device global init_power_on flag is somewhat arbitrary and makes
debugging power refcounting problems difficult. Instead arrange things
so that all display power domain get has a corresponding put call. After
this change we have the following sequences:

driver loading:
intel_power_domains_init_hw();
<other init steps>
intel_power_domains_enable();

driver unloading:
intel_power_domains_disable();
<other uninit steps>
intel_power_domains_fini_hw();

system suspend:
intel_power_domains_disable();
<other suspend steps>
intel_power_domains_suspend();

system resume:
intel_power_domains_resume();
<other resume steps>
intel_power_domains_enable();

at other times while the driver is loaded:
intel_display_power_get();
...
intel_display_power_put();

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180816123757.3286-2-imre.deak@intel.com

drm/i915: Introduce intel_runtime_pm_disable to pair intel_runtime_pm_enable

Currently, we cancel the extra wakeref we have for !runtime-pm devices
inside power_wells_fini_hw. However, this is not strictly paired with
the acquisition of that wakeref in runtime_pm_enable (as the fini_hw may
be called on errors paths before we even call runtime_pm_enable). Make
the symmetry more explicit and include a check that we do release all of
our rpm wakerefs.

v2: Fixup transfer of ownership back to core whilst keeping our wakeref
count balanced.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180816123757.3286-1-imre.deak@intel.com

drm/i915: Stop holding a ref to the ppgtt from each vma

The context owns both the ppgtt and the vma within it, and our activity
tracking on the context ensures that we do not release active ppgtt. As
the context fulfils our obligations for active memory tracking, we can
relinquish the reference from the vma.

This fixes a silly transient refleak from closed vma being kept alive
until the entire system was idle, keeping all vm alive as well.

Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Testcase: igt/gem_ctx_create/files
Fixes: 3365e2268b6b ("drm/i915: Lazily unbind vma on close")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180816073448.19396-1-chris@chris-wilson.co.uk

drm/i915: Remove useless error return from intel_init_mocs_engine()

As the only error is for a programming error in constructing the static
tables describing the register values, replace the error code
propagation with an assert.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180815184251.5850-1-chris@chris-wilson.co.uk

drm/i915: Only skip connector output for disable_display

We want to add no connectors, encoders or crtcs if the display is
disabled, but we still need to hook up any existing HW so that we can
power it down.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180815201207.2203-1-chris@chris-wilson.co.uk

drm/i915: Fix PM refcounting w/o DMC firmware

The case where the firmware isn't specified for a platform (although
runtime PM works only with DMC on this platform) is the same case where
the firmware is specified but can't be loaded for some reason. Hence we
need to get a display init power domain ref in the first case too to
keep the refcount bookkeeping in balance.

Also convert the related log message to be a debug one, since it's a
valid scenario for a new platform, where we need to have
dev_info->has_csr=1 set, but add support for actually loading the
firmware only later.

v2:
- In addition to the debug log, WARN on non-alpha support platforms,
  since then the first case isn't valid scenario. (Chris)

References: https://bugs.freedesktop.org/show_bug.cgi?id=107382
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180815131038.24446-1-imre.deak@intel.com

drm/i915: Clear stop-engine for a pardoned reset

If we pardon a per-engine reset, we may leave the STOP_RING bit asserted
in RING_MI_MODE resulting in the engine hanging. Unconditionally clear
it on the per-engine exit path as we know that either we skipped the
reset and so need the cancellation, or the reset was successful and the
cancellation is a no-op, or there was an error and we will follow up
with a full-reset or wedging (both of which will stop the engines again
as required).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106560
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180814171857.24673-1-chris@chris-wilson.co.uk

drm/i915: Disable runtime-pm using lowlevel functions if !HAS_RC6

If we cannot setup rc6, we cannot let the GPU suspend itself as it
cannot save its state (to a powercontext). As such, we must disable
runtime-pm, but we should do so using the low-level pm-runtime function
which leaves our own debugging functions intact (and continue to detect
errors in our runtime-pm handling should we ever be able to enable rc6).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180812223642.24865-3-chris@chris-wilson.co.uk

drm/i915: set DP Main Stream Attribute for color range on DDI platforms

Since Haswell we have no color range indication either in the pipe or
port registers for DP. Instead, there's a separate register for setting
the DP Main Stream Attributes (MSA) directly. The MSA register
definition makes no references to colorimetry, just a vague reference to
the DP spec. The connection to the color range was lost.

Apparently we've failed to set the proper MSA bit for limited, or CEA,
range ever since the first DDI platforms. We've started setting other
MSA parameters since commit dae847991a43 ("drm/i915: add
intel_ddi_set_pipe_settings").

Without the crucial bit of information, the DP sink has no way of
knowing the source is actually transmitting limited range RGB, leading
to "washed out" colors. With the colorimetry information, compliant
sinks should be able to handle the limited range properly. Native
(i.e. non-LSPCON) HDMI was not affected because we do pass the color
range via AVI infoframes.

Though not the root cause, the problem was made worse for DDI platforms
with commit 55bc60db5988 ("drm/i915: Add "Automatic" mode for the
"Broadcast RGB" property"), which selects limited range RGB
automatically based on the mode, as per the DP, HDMI and CEA specs.

After all these years, the fix boils down to flipping one bit.

[Per testing reports, this fixes DP sinks, but not the LSPCON. My
 educated guess is that the LSPCON fails to turn the CEA range MSA into
 AVI infoframes for HDMI.]

Reported-by: Michał Kopeć <mkopec12@gmail.com>
Reported-by: N. W. <nw9165-3201@yahoo.com>
Reported-by: Nicholas Stommel <nicholas.stommel@gmail.com>
Reported-by: Tom Yan <tom.ty89@gmail.com>
Tested-by: Nicholas Stommel <nicholas.stommel@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=100023
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107476
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94921
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.9+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180814060001.18224-1-jani.nikula@intel.com

drm/i915: Kick waiters on resetting legacy rings

This reapplies commit 39f3be162c46 ("drm/i915: Kick waiters on resetting
legacy rings") after the improved gem_eio was run across all machines we
found that gen3 and early gen4 still lost the immediate interrupt
following reset, and the HWSTAM w/a applied to gen6+ is inadequate.

Unlike the later gen, on gen3/4 the principle (and only tests to fail so
far) are the wait vs reset test cases, whereas the reset stress case
works fine (which was the predominantly failing case for gen6+). That is
enough to suggest the underlying issue is sufficiently different to
support the difference in HWSTAM efficacy.

Testcase: igt/gem_eio/wait-10ms
References: 39f3be162c46 ("drm/i915: Kick waiters on resetting legacy rings")
References: a69ab52b0358 ("drm/i915: Remove extra waiter kick on legacy resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180814104056.27001-1-chris@chris-wilson.co.uk

drm/i915: Restrict gen6_reset_rps_interrupts to gen6+

Do not call gen6_reset_rps_interrupts() when we know the registers do not
exist.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180812223642.24865-2-chris@chris-wilson.co.uk

drm/i915: Cleanup gt powerstate from gem

Since the gt powerstate is allocated by i915_gem_init, clean it from
i915_gem_fini for symmetry and to correct the imbalance on error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180812223642.24865-1-chris@chris-wilson.co.uk

drm/i915: Force reset on unready engine

If engine reports that it is not ready for reset, we
give up. Evidence shows that forcing a per engine reset
on an engine which is not reporting to be ready for reset,
can bring it back into a working order. There is risk that
we corrupt the context image currently executing on that
engine. But that is a risk worth taking as if we unblock
the engine, we prevent a whole device wedging in a case
of full gpu reset.

Reset individual engine even if it reports that it is not
prepared for reset, but only if we aim for full gpu reset
and not on first reset attempt.

v2: force reset only on later attempts, readability (Chris)
v3: simplify with adequate caffeine levels (Chris)
v4: comment about risks and migitations (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813130116.7250-1-mika.kuoppala@linux.intel.com

drm/i915: Expose retry count to per gen reset logic

There is a possibility for per gen reset logic to
be more nasty if the softer approach on resetting does
not bear fruit.

Expose retry count to per gen reset logic if it
wants to take such tough measures.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180810140036.24240-1-mika.kuoppala@linux.intel.com

drm/i915: Bump priority of clean up work

We require that we keep the list of outstanding work short so that we do
not "leak" memory while pageflipping under stress. However that system
stress may delay kernel workers virtually indefinitely, which incurs the
pageflips stall and eventually hit a timeout waiting for the cleanup.

Try to combat CPU starvation of our short-lived cleanup workers by
switching to a high priority workqueue.

Testcase: igt/kms_cursor_legacy/all-pipes-torture-move
References: https://bugs.freedesktop.org/show_bug.cgi?id=107122
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712115729.3506-1-chris@chris-wilson.co.uk

drm/i915/icl: account for context save/restore removed bits

The RS_CTX_ENABLE and CTX_SAVE_INHIBIT bits are not present on ICL
anymore, but we still try to set them and then check them with
GEM_BUG_ON, resulting in a BUG() call. The bug can be reproduced by
igt/drv_selftest/live_hangcheck/others-priority and our CI was able
to catch it.

It is worth noticing that commit 05f0addd9b10 ("drm/i915/icl: Enhanced
execution list support") already tried to avoid the save bits
on ICL, but only inside populate_lr_context().

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Testcase: igt/drv_selftest/live_hangcheck/others-priority
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107399
References: 05f0addd9b10 ("drm/i915/icl: Enhanced execution list support")
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180809235852.24516-1-paulo.r.zanoni@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/psr: Add debugfs support to force a downgrade to PSR1 mode.

This will make it easier to test PSR1 on PSR2 capable eDP machines.

Changes since v1:
- Remove I915_PSR_DEBUG_FORCE_PSR2, it did nothing, not sure forcing
  PSR2 would even work.
- Handle NULL crtc in intel_psr_set_debugfs_mode. (dhnkrn)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180808141911.7647-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915: Allow control of PSR at runtime through debugfs, v6

Currently tests modify i915.enable_psr and then do a modeset cycle
to change PSR. We can write a value to i915_edp_psr_debug to force
a certain PSR mode without a modeset.

To retain compatibility with older userspace, we also still allow
the override through the module parameter, and add some tracking
to check whether a debugfs mode is specified.

Changes since v1:
- Rename dev_priv->psr.enabled to .dp, and .hw_configured to .enabled.
- Fix i915_psr_debugfs_mode to match the writes to debugfs.
- Rename __i915_edp_psr_write to intel_psr_set_debugfs_mode, simplify
  it and move it to intel_psr.c. This keeps all internals in intel_psr.c
- Perform an interruptible wait for hw completion outside of the psr
  lock, instead of being forced to trywait and return -EBUSY.
Changes since v2:
- Rebase on top of intel_psr changes.
Changes since v3:
- Assign psr.dp during init. (dhnkrn)
- Add prepared bool, which should be used instead of relying on psr.dp. (dhnkrn)
- Fix -EDEADLK handling in debugfs. (dhnkrn)
- Clean up waiting for idle in intel_psr_set_debugfs_mode.
- Print PSR mode when trying to enable PSR. (dhnkrn)
- Move changing psr debug setting to i915_edp_psr_debug_set. (dhnkrn)
Changes since v4:
- Return error in _set() function.
- Change flag values to make them easier to remember. (dhnkrn)
- Only assign psr.dp once. (dhnkrn)
- Only set crtc_state->has_psr on the crtc with psr.dp.
- Fix typo. (dhnkrn)
Changes since v5:
- Only wait for PSR idle on the PSR connector correctly. (dhnkrn)
- Reinstate WARN_ON(drrs.dp) in intel_psr_enable. (dhnkrn)
- Remove stray comment. (dhnkrn)
- Be silent in intel_psr_compute_config on wrong connector. (dhnkrn)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180809142101.26155-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915/selftests: Hold rpm for unparking

The call to i915_gem_unpark() checks that we hold a rpm wakeref before
taking a long term wakeref for i915->gt.awake. We should therefore make
sure we do hold the wakeref when directly calling unpark to disable
the retire worker.

Fixes: 932cac10c8fb ("drm/i915/selftests: Prevent background reaping of active objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180809063449.4474-1-chris@chris-wilson.co.uk

drm/i915: Restore user forcewake domains across suspend

On suspend, we cancel the automatic forcewake and clear all other sources
of forcewake so the machine can sleep before we do suspend. However, we
expose the forcewake to userspace (only via debugfs, but nevertheless we
do) and want to restore that upon resume or else our accounting will be
off and we may not acquire the forcewake before we use it. So record
which domains we cleared on suspend and reacquire them early on resume.

v2: Hold the spinlock to appease our sanitychecks
v3: s/fw_domains_user/fw_domains_saved/ to convey intent more clearly

Reported-by: Imre Deak <imre.deak@linux.intel.com>
Fixes: b8473050805f ("drm/i915: Fix forcewake active domain tracking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180808210842.3555-1-chris@chris-wilson.co.uk

drm/i915/cfl: Add a new CFL PCI ID.

One more CFL ID added to spec.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803232721.20038-1-rodrigo.vivi@intel.com

drm/i915: Remove extra waiter kick on legacy resets

Now with a more efficacious workaround for the lost interrupts after
reset, we can remove the hack of kicking the waiters after reset. The
issue was that the kick only worked for the immediate window after the
reset (those seqno that would complete in the time it took for the
waiter thread to perform its check) but miss any seqno that lacked an
interrupt afterwards.

References: 39f3be162c46 ("drm/i915: Kick waiters on resetting legacy rings")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180808105101.913-3-chris@chris-wilson.co.uk

drm/i915: Unmask user interrupts writes into HWSP on snb/ivb/vlv/hsw

An oddity occurs on Sandybridge, Ivybridge and Haswell (and presumably
Valleyview) in that for the period following the GPU restart after a
reset, there are no GT interrupts received. From Ville's notes, bit 0 in
the HWSTAM corresponds to the render interrupt, and if we unmask it we
do see immediate resumption of GT interrupt delivery (via the master irq
handler) after the reset.

v2: Limit the w/a to the render interrupt from rcs

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107500
Fixes: c5498089463b ("drm/i915: Mask everything in ring HWSTAM on gen6+ in ringbuffer mode")
References: d420a50c21ef ("drm/i915: Clean up the HWSTAM mess")
Testcase: igt/gem_eio/reset-stress
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180808105101.913-2-chris@chris-wilson.co.uk

drm/i915: Warn if we hit the timeout for wait-for-idle

Hitting the timeout and finding that all engines are actually idle is
indicative of an interrupt delivery problem. This problem is an issue
that we need to fix, so make sure we log it and provide the GEM trace.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180808105101.913-1-chris@chris-wilson.co.uk

drm/i915/icl: Add missing power gate enums

On ICL there are 5 fused power gates, so add the two missing ones for
clarity.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-11-imre.deak@intel.com

drm/i915: Use existing power well IDs where possible

There is no need for separate IDs for power wells on a new platform with
the same functionality as an other power well on a previous platform, we
can just reuse the ID from the previous platform. This is only possible
after the previous patches where we removed dependence on the actual
enum values.

This also fixes a problem on ICL where in assert_can_enable_dc5/9() we
would've failed to look up the PW#2 power well.

v2:
- Keep an ID assigned for the ICL PW#2 power well too. (Paulo)

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
[Added comment about the ICL PW#2 fix to the commit log]
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-10-imre.deak@intel.com

drm/i915: Make power well ID names more uniform

The format for the ID names is <platform>_DISP_PW_* so rename the IDs
not following this accordingly. Leave BXT_DPIO_CMN_BC as-is since we'll
change that to use another existing ID in the next patch.

v2:
- Fix line over 80 chars checkpatch warning.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-9-imre.deak@intel.com

drm/i915: Remove redundant power well IDs

Now that we removed dependence on the power well IDs to determine the
control register and request/status flag offsets the only purpose of
power well IDs is to look up power wells directly bypassing the power
domains framework. However this direct lookup isn't needed for most of
the exisiting power wells and hopefully won't be needed for any new
power wells in the future. To make maintenance of the power well ID enum
easier, don't require a unique ID for each power well, only if it's
necessary. Remove the IDs becoming redundant this way and assign to all
the corresponding power wells a new DISP_PW_ID_NONE ID.

After the previous two patches the IDs don't need to have a fixed value,
so remove the explicit initializers and adjust the enum's code comment
accordingly.

v2:
- Keep required ID assignments for HSW_DISP_PW_GLOBAL and ICL_DISP_PW_2.
  (Paulo)

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-8-imre.deak@intel.com

drm/i915/ddi: Use power well CTL IDX instead of ID

Similarly to the previous patch use a separate request/status HW flag
index defined right after the corresponding control registers instead of
depending for this on the power well IDs. Since the set of
control/status registers varies among the different power wells (on a
single platform), also add a new i915_power_well_registers struct that
we populate and assign to each DDI power well as needed.

Also clarify a bit the code comment describing the function and layout
of the control registers.

This also fixes a problem on ICL, where we incorrectly read the KVMR
control register in hsw_power_well_requesters() even for DDI and AUX
power wells.

v2:
- Clarify platform range tags in code comments. (Paulo)
- Fix line over 80 chars checkpatch warning.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-7-imre.deak@intel.com

drm/i915/vlv: Use power well CTL IDX instead of ID

Atm, we determine the control/status flag offsets within the PUNIT
control/status registers based on the power well's ID. Since the power
well ID enum is global across all platforms, the associated macros to
get the flag offsets involves some magic. This makes checking the
register/bit definitions against the specification more difficult than
necessary. Also the values in the power well ID enum must stay fixed,
making code maintenance of the enum cumbersome.

To solve the above define the control/status flag indices right after
the corresponding registers and use these to derive the control/status
flag values by storing the indices in the i915_power_well_desc struct.

Initializing anonymous union fields require the preceding field in the
struct to be explicitly initialized - even when using named
initializers - and the initialization to be done right before the union
initialization, hence the reordering of the .id fields.

v2:
- Clarify commit log message about anonymous union initializers. (Paulo)

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-6-imre.deak@intel.com

drm/i915: Constify power well descriptors

It makes sense to keep unchanging data const. Extract such fields from
the i915_power_well struct into a new i915_power_well_desc struct that
we initialize during compile time. For the rest of the dynamic
fields allocate an array of i915_power_well objects in i915 dev_priv,
and link to each of these objects their corresponding
i915_power_well_desc object.

v2:
- Fix checkpatch warnings about missing param name in fn declaration and
  lines over 80 chars. (Paulo)
- Move check for unique IDs to __set_power_wells().

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
[Fixed checkpatch warn in __set_power_wells()]
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-5-imre.deak@intel.com

drm/i915/vlv: Remove redundant power well ID asserts

The callbacks these asserts are called from are used from a single power
well, so not much point in checking that. The check also requires a unique
power well ID that we would need to keep around only for this purpose.
(A follow-up patch removes power well IDs not needed for direct power
 well access).

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-4-imre.deak@intel.com

drm/i915: Rename intel_power_domains_fini() to intel_power_domains_fini_hw()

intel_power_domains_fini() rolls back what was done in
intel_power_domains_init_hw(), so rename and move it accordingly. This
allows us adding a cleanup function later for intel_power_domains_init()
in a cleaner way.

No functional change.

v2:
- Fix checkpatch error adding missing param name to function
  declaration. (Paulo)

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-3-imre.deak@intel.com

drm/i915/icl: Fix power well anonymous union initializers

Similarly to commit 0a445945be6d
("drm/i915: Work around GCC anonymous union initialization bug")
we need to initialize anonymous unions inside extra braces to work
around a GCC4.4 build error.

v2:
- Fix checkpatch errors in commit log. (Paulo)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-2-imre.deak@intel.com

drm/i915: Pull seqno started checks together

We have a few instances of checking seqno-1 to see if the HW has started
the request. Pull those together under a helper.

v2: Pull the !seqno assertion higher, as given seqno==1 we may indeed
check to see if we have started using seqno==0.

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806112605.20725-1-chris@chris-wilson.co.uk

drm/i915/skl: distribute DDB based on panel resolution

We distribute DDB equally among all pipes irrespective of display
buffer requirement of each pipe. This leads to a situation where high
resolution y-tiled display can not be enabled with 2 low resolution
displays.

Main contributing factor for DDB requirement is width of the display.
This patch make changes to distribute ddb based on display width.
So display with higher width will get bigger chunk of DDB.

Changes Since V1:
 - pipe_size/ddb_size will not overflow u16 so use appropriate
   data-types during computation (Chris)
Changes Since V2:
 - avoid redundancy and possible truncation errors (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107113
Cc: raviraj.p.sitaram@intel.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180801151113.5337-1-mahesh1.kumar@intel.com

drm/i915: ddb_size is of u16 type

ddb_size is u16 so use same return type for intel_get_ddb_size
wrapper.

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731142445.30723-2-mahesh1.kumar@intel.com

drm/i915/selftests: Unconditionally do a chipset flush before emit_bb_start

Experience teaches us over and over again that coherency on Baytrail
requires the odd heavy hammer, and in particular clflush alone is not
enough to guarrantee that writes from the CPU are picked up by the CS.
Do as we do elsewhere and ensure we have an unconditional
i915_gem_chipset_flush() after writing to memory and submitting a batch
to HW.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107499
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806144604.8346-1-chris@chris-wilson.co.uk

drm/i915: Stop dropping irq around resets

A long time ago, we were afraid of handling interrupts and signaling
waiters during a reset, worrying that the confusion in request handling
would interfere with our attempts to process the reset in an orderly
fashion. Since then, we have isolated our irq-driven request handling by
virtue of the engine->timeline.lock and control of kthreads where
required, eliminating the danger of concurrently processing interrupts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806145647.13131-1-chris@chris-wilson.co.uk

drm/i915: kill resource streamer support

After disabling resource streamer on ICL (due to it actually not
existing there), I got feedback that there have been some experimental
patches for mesa to use RS years ago, but nothing ever landed or shipped
because there was no performance improvement.

This removes it from kernel keeping the uapi defines around for
compatibility.

v2: - re-add the inadvertent removal of CTX_CTRL_INHIBIT_SYN_CTX_SWITCH
    - don't bother trying to document removed params on uapi header:
      applications should know that from the query.
      (from Chris)

v3: - disable CTX_CTRL_RS_CTX_ENABLE istead of removing it
    - reword commit message after Daniele confirmed no performance
      regression on his machine
    - reword commit message to make clear RS is being removed due to
      never been used
v4: - move I915_EXEC_RESOURCE_STREAMER to __I915_EXEC_ILLEGAL_FLAGS so
      the check on ioctl() is made much earlier by
      i915_gem_check_execbuffer() (suggested by Tvrtko)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803232443.17193-1-lucas.demarchi@intel.com

drm/i915/icl: move has_resource_streamer to GEN11_FEATURES

Resource streamer has been removed on GEN11 so move it to the FEATURES
macro.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719170557.10729-1-lucas.demarchi@intel.com

drm/i915: Fix typo in i915_drm_resume()

Trivial typo, s/loose/lose/, in i915_drm_resume.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803164150.8185-1-gwan-gyeong.mun@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Clear all residual RPS events on disabling interrupts

Make sure that the RPS IIR is completely clear on disabling so we should
not get any more interrupts after idling. Since the IIR is shared with
the guc, we have to be careful to only clobber RPS events.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180802100631.31305-3-chris@chris-wilson.co.uk

drm/i915: Unconditionally clear the pm/guc GT IIR upon acking

Having stored the IIR for action, we should always clear it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180802100631.31305-2-chris@chris-wilson.co.uk

drm/i915/lpe: Mark LPE audio runtime pm as "no callbacks"

The LPE audio is a child device of i915, it is powered up and down
alongside the igfx and presents no independent runtime interface. This
aptly fulfils the description of a "No-Callback" Device, so mark it
thus.

Fixes: 183c00350ccd ("drm/i915: Fix runtime PM for LPE audio")
Testcase: igt/pm_rpm/basic-pci-d3-state
Testcase: igt/pm_rpm/basic-rte
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180802140416.6062-1-chris@chris-wilson.co.uk

drm/i915/icl: avoid unclaimed PLANE_NV12_BUF_CFG register

We don't have proper watermark NV12 support on ICL due to differences
in how it should be implemented. In commit 234059da0f33
("drm/i915/icl: NV12 y-plane ddb is not in same plane") we avoided
writing the non-existent PLANE_NV12_BUF_CFG registers but we forgot to
also avoid them on the hardware state readout. While the code is still
not correct, at least now we can avoid unclaimed register error
messages when dealing with RGB formats, which makes CI happier.

Also add some FIXME comments in order to make it even more clear that
there's still work to do.

References: commit 234059da0f33 ("drm/i915/icl: NV12 y-plane ddb is
 not in same plane")
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180801004614.22149-1-paulo.r.zanoni@intel.com

drm/i915: Drop stray clearing of rps->last_adj

We used to reset last_adj to 0 on crossing a power domain boundary, to
slow down our rate of change. However, commit 60548c554be2 ("drm/i915:
Interactive RPS mode") accidentally caused it to be reset on every
frequency update, nerfing the fast response granted by the slow start
algorithm.

Fixes: 60548c554be2 ("drm/i915: Interactive RPS mode")
Testcase: igt/pm_rps/mix-max-config-loaded
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180802100631.31305-1-chris@chris-wilson.co.uk

drm/i915/execlists: Terminate the context image with BB_END

In the aub trace utility, the context images are terminated with a
MI_BATCH_BUFFER_END; the simulator is reported as complaining otherwise.
Do the same for our protocontext image for completeness, and in passing
apply the magic bit for gen10 to mark the end of the context image.

Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730164325.12770-1-chris@chris-wilson.co.uk

Revert "drm/i915/icl: WaEnableFloatBlendOptimization"

The register for 0xe420 is unable to hold any value, including
this bit. The documentation is also mixed between having a
register bit for toggle and having a state command setup
for it. Apparently the register toggle is deprecated.

Remove the register toggle as evidence shows it's futile.

The thing remaining is an apology and humble request for
Mesa folks to resurrect their state setup for this as they
were on right track from start.

This reverts commit 0bf059f3532bb39c52d917142206a8554fc2f1c5.

Fixes: 0bf059f3532b ("drm/i915/icl: WaEnableFloatBlendOptimization")
References: HSDES#1406393558
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730120636.26958-1-mika.kuoppala@linux.intel.com

drm/i95: Mark GGTT as incoherent for gen10+

The evidence suggests that we need to start treating writes via GGTT as
incoherent for gen10+, that is that they are internally buffered and not
immediately visible via a read along a different physical path.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107398
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107400
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107435
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180801104721.4030-1-chris@chris-wilson.co.uk

drm/i915: Interactive RPS mode

RPS provides a feedback loop where we use the load during the previous
evaluation interval to decide whether to up or down clock the GPU
frequency. Our responsiveness is split into 3 regimes, a high and low
plateau with the intent to keep the gpu clocked high to cover occasional
stalls under high load, and low despite occasional glitches under steady
low load, and inbetween. However, we run into situations like kodi where
we want to stay at low power (video decoding is done efficiently
inside the fixed function HW and doesn't need high clocks even for high
bitrate streams), but just occasionally the pipeline is more complex
than a video decode and we need a smidgen of extra GPU power to present
on time. In the high power regime, we sample at sub frame intervals with
a bias to upclocking, and conversely at low power we sample over a few
frames worth to provide what we consider to be the right levels of
responsiveness respectively. At low power, we more or less expect to be
kicked out to high power at the start of a busy sequence by waitboosting.

Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active
request") whenever we missed the frame or stalled, we would immediate go
full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we
relaxed the waitboosting to only apply if the pipeline was deep to avoid
over-committing resources for a near miss. Sadly though, a near miss is
still a miss, and perceptible as jitter in the frame delivery.

To try and prevent the near miss before having to resort to boosting
after the fact, we use the pageflip queue as an indication that we are
in an "interactive" regime and so should sample the load more frequently
to provide power before the frame misses it vblank. This will make us
more favorable to providing a small power increase (one or two bins) as
required rather than going all the way to maximum and then having to
work back down again. (We still keep the waitboosting mechanism around
just in case a dramatic change in system load requires urgent uplocking,
faster than we can provide in a few evaluation intervals.)

v2: Reduce rps_set_interactive to a boolean parameter to avoid the
confusion of what if they wanted a new power mode after pinning to a
different mode (which to choose?)
v3: Only reprogram RPS while the GT is awake, it will be set when we
wake the GT, and while off warns about being used outside of rpm.
v4: Fix deferred application of interactive mode
v5: s/state/interactive/
v6: Group the mutex with its principle in a substruct

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111
Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk

drm/i915/gtt: remove px_page

Entries will either be pointing to scratch or real PD, making the
px_page(pd) check pointless. Also since there are no other users of
px_page, just remove it.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730120544.20784-1-matthew.auld@intel.com

drm/i915/selftests: Replace opencoded clflush with drm_clflush_virt_range

We occasionally see that the clflush prior to a read of GPU data is
returning stale data, reminiscent of much earlier bugs fixed by adding a
second clflush for serialisation. As drm_clflush_virt_range() already
supplies the workaround, use it rather than open code the clflush
instruction.

References: 396f5d62d1a5 ("drm: Restore double clflush on the last partial cacheline")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730075351.15569-3-chris@chris-wilson.co.uk

drm/i915: Kick waiters on resetting legacy rings

For reasons unknown, interrupts following a reset do not arrive, but
this can be papered over by kicking any waiter and peeking at the
breadcrumbs following the reset.

Testcase: igt/gem_eio/reset-stress
References: https://bugs.freedesktop.org/show_bug.cgi?id=105957
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730075351.15569-2-chris@chris-wilson.co.uk

drm/i915: Downgrade Gen9 Plane WM latency error

According to intel_read_wm_latency() it is perfectly legal for one WM
and all subsequent levels to be 0 (and the deeper powersaving states
disabled), so don't shout *ERROR*, over and over again.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726161527.10516-1-chris@chris-wilson.co.uk

drm/i915/icl: Set TBT IO in Aux transaction

For a TBT sequence, we need to set the IO type to TBT
in  DDI_AUX_CTL.

v2: Avoid duplications.(Paulo)

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532648115-29795-2-git-send-email-anusha.srivatsa@intel.com

drm/i915/icl: Add TBT checks for PLL calculations

Add missing TBT check in the Pll calculation.

v2: do not use a auxiliary function to check if status is
TBT or not. (Paulo)

v3: Code style changes. (Paulo)

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532648115-29795-1-git-send-email-anusha.srivatsa@intel.com

drm/i915: inline skl_copy_ddb_for_pipe() to its only caller

While things may have been different before, right now the function is
very simple and has a single caller. IMHO any possible benefits from
an abstraction here are gone and not worth the price of the current
indirection while reading the code.

Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607230700.28359-1-paulo.r.zanoni@intel.com

drm/i915/icl: don't set CNL_DDI_CLOCK_REG_ACCESS_ON anymore

The new recommendation from the spec is to simply not set this bit
anymore. Not setting the bit would prevent some hangs that our driver
manages to avoid since commit c8af5274c3cb ("drm/i915: enable the
pipe/transcoder/planes later on HSW+"), and the theoretical downside
of not setting the bit doesn't seem realistic according to the HW
team. Let's follow their recommendation.

BSpec: 20233
References: commit c8af5274c3cb ("drm/i915: enable the
 pipe/transcoder/planes later on HSW+")
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726001229.13791-1-paulo.r.zanoni@intel.com

drm/i915: Drop unneed i915 parameter from intel_ring_pin()

As we now have a ring->vma available, we can just lookup our i915
pointer from inside the vm, and so not require the unsightly parameter.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727155501.18963-1-chris@chris-wilson.co.uk

drm/i915: Add a fault injection point to WOPCM init

Add a fault injection point in the WOPCM initialization path.

v4:
Move the injection inside the WOPCM init function.

Signed-off-by: Jakub Bartmiński <jakub.bartminski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-5-jakub.bartminski@intel.com

drm/i915: Remove unnecessary ggtt_offset_bias from i915_gem_context

Since ggtt_offset_bias is now stored in ggtt.pin_bias, it is duplicated
inside i915_gem_context, and can instead be accessed directly from ggtt.

v3:
Added a helper function to retrieve the ggtt.pin_bias from the vma.

v4:
Moved the helper function to the previous patch in the series.
Dropped the bias from intel_ring_pin. This introduces a slight functional
change since we are always pinning the ring a bit higher if GuC is present
even though we don't really need to.

v8:
Fixed patch not applying on the most recent upstream.

Signed-off-by: Jakub Bartmiński <jakub.bartminski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-4-jakub.bartminski@intel.com

drm/i915/guc: Move the pin bias value from GuC to GGTT

Removing the pin bias from GuC allows us to not check for GuC every time
we pin a context, which fixes the assertion error on unresolved GuC
platform default in mock contexts selftest.

It also seems that we were using uninitialized WOPCM variables when
setting the GuC pin bias. The pin bias has to be set after the WOPCM,
but before the call to i915_gem_contexts_init where the first contexts
are pinned.

v2:
This also makes it so that there's no need to set GuC variables from
within the WOPCM init function or to move the WOPCM init, while keeping
the correct initialization order. Also for mock tests the pin bias is
left at 0 and we make sure that the pin bias with GuC will not be
smaller than without GuC.

v3:
Avoid unused i915 in intel_guc_ggtt_offset if debug is disabled.

v4:
Squash with WOPCM init reordering.
Moved the i915_ggtt_pin_bias helper to this patch, and made some
functions use it instead of directly dereferencing i915->ggtt.

v5:
Since we now don't use wopcm.guc.base for the pin bias there's no need to
validate it. It also has already been verified in WOPCM init.

v6:
Deleted the now unnecessarily introduced includes from previous versions.
Dropped naming changes from dev_priv to i915 for better patch readability.

v7:
Changed some comments to make more sense in the context they're in.

v8:
Moved and renamed the function which now returns the wopcm.guc.size to
intel_guc.c:intel_guc_reserved_gtt_size to avoid any possible confusion
with the pin_bias in ggtt, which should be used for pinning.
Fixed patch not applying or the most recent upstream.

Fixes: f7dc0157e4b5 ("drm/i915/uc: Fetch GuC/HuC firmwares from guc/huc specific init")
Testcase: igt/drv_selftest/mock_contexts #GuC
Signed-off-by: Jakub Bartmiński <jakub.bartminski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-3-jakub.bartminski@intel.com

drm/i915/guc: Do not partition WOPCM if GuC is not used

There seems to be no reason for doing extra work on WOPCM partitioning
in the case GuC is not used, as the partitioning will not be used by the
intel_wopcm_init_hw function anyway.

Signed-off-by: Jakub Bartmiński <jakub.bartminski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-2-jakub.bartminski@intel.com

drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias

It would appear that the calculated GuC pin bias was larger than it should
be, as the GuC address space does NOT contain the "HW contexts RSVD" part
of the WOPCM. Thus, the GuC pin bias is simply the GuC WOPCM size.

v5:
Clarify the diagram to better represent the GuC address space.
Since we now don't use guc.base for the pin bias there's no need to
validate it. It also has already been verified in WOPCM init.

Bspec: 1180

Signed-off-by: Jakub Bartmiński <jakub.bartminski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-1-jakub.bartminski@intel.com

drm/i915: Remove superfluous GEN8_LR_CONTEXT_ALIGN

As GEN8_LR_CONTEXT_ALIGN is I915_GTT_MIN_ALIGNMENT is it functionally
equivalent to 0, and we will not be able to reduce the min-alignment for
the GTT, so passing 0 is and will remain equivalent.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727092947.1953-1-chris@chris-wilson.co.uk

drm/i915: Eliminate use of PAGE_SIZE as a virtual alignment

Using PAGE_SIZE for virtual offset alignment is superfluous as it is
equal to the minimum gtt alignment and so equivalent to 0. It is also
the wrong value to use as we stopped using physical page constructs for
the virtual GTT, i.e. it would be preferrable to use I915_GTT_PAGE_SIZE
and in these cases merely imply I915_GTT_MIN_ALIGNMENT.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727091855.1879-1-chris@chris-wilson.co.uk

drm/i915/selftests: Exercise resetting in the middle of a wait-on-fence

On older HW, gen2/3, fence registers are used for detiling GPU commands
and as such changing those registers requires serialisation with the
requests on the GPU. Anything running on the GPU is subject to a hang,
and so we must be able to recover cleanly in the middle of a stuck wait
on a fence register.

We can simulate using the fence on the GPU simply by marking the fence
as active on the request for this vma, the interface being common to all
gen, thus broadening the test.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194746.19111-2-chris@chris-wilson.co.uk

drm/i915/selftests: Use a full emulation of a user ppgtt context

To test eviction from a ppgtt, we just want a ppgtt i.e. something other
than the Global GTT which is shared and used by the kernel for HW
features like fencing and scanout. However, we also need it to pass
!i915_is_ggtt() and the simplest way is to emulate a full user context
rather than the internal kernel context that is used for the GGTT.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194746.19111-1-chris@chris-wilson.co.uk

drm/i915: Don't disable the GPU for older gen on wedging

If we issue a device level GPU reset on the older gen, it will disable
key components of the GMCH and the display engine. The purpose of
wedging is to simply prevent further GEM usage without disabling KMS, so
we need to be careful when we do issue the reset on wedging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726085033.4044-3-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>

drm/i915: Restore sane defaults for KMS on GEM error load

If we fail during GEM initialisation, we scrub the HW state by
performing a device level GPU resuet. However, we want to leave the
system in a usable state (with functioning KMS but no GEM) so after
scrubbing the HW state, we need to restore some sane defaults and
re-enable the low-level common parts of the GPU (such as the GMCH).

v2: Restore GTT entries.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726085033.4044-2-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>

drm/i915: Protect guc_fini_wq() against module load abort

Prevent
[  397.873143] general protection fault: 0000 [#1] PREEMPT SMP PTI
[  397.873154] CPU: 4 PID: 4799 Comm: drv_module_relo Tainted: G     U            4.18.0-rc6-CI-CI_DRM_4534+ #1
[  397.873162] Hardware name: Micro-Star International Co., Ltd. MS-7B54/Z370M MORTAR (MS-7B54), BIOS 1.10 12/28/2017
[  397.873175] RIP: 0010:__lock_acquire+0xf6/0x1b50
[  397.873179] Code: 85 c0 4c 8b 9d 40 ff ff ff 8b 8d 38 ff ff ff 44 8b 8d 30 ff ff ff 4c 8b 85 28 ff ff ff 44 8b 95 24 ff ff ff 0f 84 54 03 00 00 <f0> ff 80 38 01 00 00 8b 15 45 8c 59 02 45 8b bc 24 70 08 00 00 85
[  397.873240] RSP: 0018:ffffc90000497b40 EFLAGS: 00010002
[  397.873246] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000001 RCX: 0000000000000000
[  397.873252] RDX: 0000000000000046 RSI: 0000000000000000 RDI: 0000000000000000
[  397.873258] RBP: ffffc90000497c20 R08: ffffffff810a25e9 R09: 0000000000000000
[  397.873264] R10: 0000000000000000 R11: ffff880255c63c28 R12: ffff8801093b2840
[  397.873270] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000246
[  397.873277] FS:  00007faf88d71980(0000) GS:ffff880266300000(0000) knlGS:0000000000000000
[  397.873284] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  397.873289] CR2: 000055d866c9ca10 CR3: 000000025472e006 CR4: 00000000003606e0
[  397.873295] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  397.873301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  397.873308] Call Trace:
[  397.873318]  ? lock_acquire+0xa6/0x210
[  397.873323]  lock_acquire+0xa6/0x210
[  397.873331]  ? drain_workqueue+0x19/0x180
[  397.873339]  __mutex_lock+0x89/0x980
[  397.873346]  ? drain_workqueue+0x19/0x180
[  397.873352]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
[  397.873359]  ? trace_hardirqs_on_caller+0xe0/0x1b0
[  397.873365]  ? drain_workqueue+0x19/0x180
[  397.873373]  ? debug_object_active_state+0x127/0x150
[  397.873381]  ? drain_workqueue+0x19/0x180
[  397.873387]  drain_workqueue+0x19/0x180
[  397.873395]  destroy_workqueue+0x12/0x1f0
[  397.873476]  intel_guc_fini_misc+0x36/0x90 [i915]
[  397.873540]  i915_gem_fini+0x91/0x100 [i915]
[  397.873588]  i915_driver_unload+0xd2/0x110 [i915]
[  397.873638]  i915_pci_remove+0x19/0x30 [i915]
[  397.873646]  pci_device_remove+0x36/0xb0
[  397.873653]  device_release_driver_internal+0x185/0x250
[  397.873660]  driver_detach+0x35/0x70
[  397.873668]  bus_remove_driver+0x53/0xd0
[  397.873675]  pci_unregister_driver+0x25/0xa0
[  397.873683]  __se_sys_delete_module+0x162/0x210
[  397.873691]  ? do_syscall_64+0xd/0x190
[  397.873697]  do_syscall_64+0x55/0x190
[  397.873704]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  397.873710] RIP: 0033:0x7faf884231b7
[  397.873714] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
[  397.873775] RSP: 002b:00007ffda4e98cf8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  397.873784] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faf884231b7
[  397.873790] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055fbb18f1bd8
[  397.873796] RBP: 000055fbb18f1b70 R08: 000055fbb18f1bdc R09: 00007ffda4e98d38
[  397.873802] R10: 00007ffda4e97cf4 R11: 0000000000000206 R12: 000055fbb0d32470
[  397.873808] R13: 00007ffda4e992e0 R14: 0000000000000000 R15: 0000000000000000

v2: It's use-after-free; not a NULL pointer.

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726085033.4044-1-chris@chris-wilson.co.uk

drm/i915: Mark up object tiling-and-stride getters as const

For that little bit of defense against a tired programmer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725155447.11909-1-chris@chris-wilson.co.uk

drm/i915: Avoid computing tile_row_size() for untiled objects

i915_gem_tile_height() asserts that the object is tiled, but inside the
error printer for the selftest we computed the row size regardless of
tiling, tripping over the assert.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726104759.8684-1-chris@chris-wilson.co.uk

drm/i915/mst: Continue state updates even if AUX writes fail.

We are too late in the enabling sequence to back out cleanly, not updating
state tracking variables, like intel_dp->active_mst_links in this
instance, results in incorrect behaviour further along.

v2: Fixed int v/s bool comparison

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107281
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718171943.3246-2-dhinakaran.pandiyan@intel.com

drm/i915/mst: Do not retrain new links

The short pulse handler checks if channel equalization is okay and
goes onto retrain a link if there are active MST links. This retraining
path is not meant for new MST connections, but due to a bug elsewhere, if
active_mst_links is < 0 the boolean check for active_mst_links passes and
we proceed to retrain a new link. This results in a sequence of failed link
training attempts, most likely due to the hardware not setup for link
training at that point i.e., missing the DDI pre_enable sequence.

[   80.301272] [drm:intel_dp_check_mst_status] channel EQ not ok, retraining
[   80.301312] [drm:intel_ddi_prepare_link_retrain] *ERROR* Timeout waiting for DDI BUF C idle bit

The above error gives us a hint something went wrong before link
training started.

Check for a positive value of active_mst_links and throw in a warning for
invalid active_mst_links as debug aid.

Cc: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718171943.3246-1-dhinakaran.pandiyan@intel.com

drm/i915/icl: toggle PHY clock gating around link training

The Gen11 TypeC PHY DDI Buffer chapter, PHY Clock Gating Programming
section says that PHY clock gating should be disabled before starting
voltage swing programming, then enabled after any link training is
complete.

v2: Simple rebase.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725002813.6938-6-paulo.r.zanoni@intel.com

drm/i915/icl: program MG_DP_MODE

Programming this register is part of the Enable Sequence for
DisplayPort on ICL. Do as the spec says.

v2: Simple rebase.

Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725002813.6938-5-paulo.r.zanoni@intel.com

drm/i915/icl: Update FIA supported lane count for hpd.

In ICL, Flexible IO Adapter (FIA) muxes data and clocks of USB 3.1,
tbt and display controller. In DP alt mode FIA configure the
number of lanes and will be used apart from DPCD read to calculate max
available lanes for DP enablement.

v2 (from Paulo): Simple rebase.

Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> (v1).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
[Paulo: significant rewrite of the patch.]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725002813.6938-4-paulo.r.zanoni@intel.com

drm/i915/icl: store the port type for TC ports

The type is detected based on the live status bits. Once detected,
it's not supposed to be changed, so we have some sanity checks for
that.

v2: Rebase.

Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725002813.6938-3-paulo.r.zanoni@intel.com

drm/i915/icl: implement icl_digital_port_connected()

Do like the other functions and check for the status bits. The "Hot
Plug Detection" page from our documentation says we can't just use the
ISR bits on the CPU side (North Display, which has the TC and TBT
modes), so use the correct register: DFLEXDPSP, TC Live State field.

v2: Rebase.
v3:
  - Simplify true/false assignment (Rodrigo).
  - Reorganize is_gen if ladder (Rodrigo).
  - Don't use the ISR for TC/TBT CPU bits.
v4:
  - Improve commit message wording (Lucas).
v5:
  - COMMIT_LOG_LONG_LINE (Checkpatch).

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> (v3).
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725195927.12059-1-paulo.r.zanoni@intel.com

drm/i915/dp: Improve clock recovery loop limit comment

Clarifies the clock recovery loop limit comment that 80
max_cr_tries for pre-DP1.4 devices was chosen as a very
tolerant upper bound.
Assumptions made:
- DP1.4 syncs should be smarter so they won't need more
than 10 tries
- pre-DP1.4 syncs should be compliant enough to not need
that many tries (80) but we should tolerate any that may
trigger this corner case

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Marc Herbert <marc.herbert@intel.com>
Suggested-by: Marc Herbert <marc.herbert@intel.com>
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Marc Herbert <marc.herbert@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532471612-30001-1-git-send-email-nathan.d.ciobanu@linux.intel.com

drm/i915: Skip repeated calls to i915_gem_set_wedged()

If we already wedged, i915_gem_set_wedged() becomes a complicated no-op.

References: https://bugs.freedesktop.org/show_bug.cgi?id=107343
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180723145335.24579-1-chris@chris-wilson.co.uk

drm/i915/icl: Implement voltage swing programming sequence for MG PHY DDI

This sequence is used to setup voltage swing before enabling MG PHY DDI
as well as for changing the voltage during DisplayPort Link training.

For ICL, there are two types of DDIs. This sequence needs to be used
for MG PHY DDI which is ports C-F.

v6 (From Manasi):
* Add programming for MG_CLKHUB and MG_TX_DCC as per the
spec updates

v5 (from Paulo):
* Checkpatch.
v4 (from Paulo):
* Fix bogus error message
* Fix copy+paste bugs (missing s/TX1/TX2/ after copy+paste)
* Use the new mask names
* Stay under 80 columns
* Add some blank lines
v3:
* Clear the regs before writing (Paulo)
v2:
* Rename to MG PHY in the function def (Jani Nikula)
* Rebase on top of new revision of other patches in series

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530225344-20373-2-git-send-email-manasi.d.navare@intel.com

drm/i915/icl: Add remaining registers and bitfields for MG PHY DDI

This patch adds the remaining register definitions and bit fields
required for MG PHy DDI buffer initializations and voltage
swing programming for MG PHy DDI ports.

While at it this patch also fixes the naming for previously defined
MG PHY registers in original commit id (c92f47b5ec977a "drm/i915/icl:
Add register defs for voltage swing sequences for MG PHY DDI").
Since the MG PHY registers are first defined in ICL platform, there
is no need for _ICL prefix.

v4 (from Paulo): add two white spaces to CRI_CALCINIT too.

v3:
* Fix register names, add spaces for MASK defines, correct the order
of #defines (Paulo)

v2:
* Change the MG_TX_DRVCTL registers names to match the spec (Anusha)

Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531510993-6606-1-git-send-email-manasi.d.navare@intel.com

drm/i915: Show stack (by WARN) for hitting forcewake errors

On Sandybridge, we need a workaround to wait for the CPU thread to wake
up before we are sure that we have enabled the GT power well. However,
we do see the errors being reported and failed reads returning spurious
results. To try and capture more details as it fails, promote the error
into a WARN so we grab the stacktrace, and to try and reduce the
frequency of error increase the timeout from 500us to 5ms.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720111102.11549-1-chris@chris-wilson.co.uk

drm/i915: Pull unpin map into vma release

A reasonably common operation is to pin the map of the vma alongside the
vma itself for the lifetime of the vma, and so release both pins at the
same time as destroying the vma. It is common enough to pull into the
release function, making that central function more attractive to a
couple of other callsites.

The continual ulterior motive is to sweep over errors on module load
aborting...

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180721125037.20127-1-chris@chris-wilson.co.uk

drm/i915/dp: Refactor max_vswing_tries variable

Changes the type and renames the max_vswing_tries variable
which was declared as an integer but used as a boolean
making it easy to be confused with a counter.

Changes in v2:
    - updated the title and commit message
    - left the loop exit point in place

v3: fix typo in title
v4: renamed max_vswing to max_vswing_reached (Ville)

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Marc Herbert <marc.herbert@intel.com>
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720214413.29506-2-rodrigo.vivi@intel.com

drm/i915/dp: Limit link training clock recovery loop

Limit the link training clock recovery loop to 10 attempts at
LANEx_CR_DONE per DP 1.4 spec section 3.5.1.2.2 and 80 attempts for
pre-DP 1.4 (4 voltage levels x 4 preemphasis levels x
x 5 identical voltages tries). Some faulty USB-C MST hubs can
cause us to get stuck in this loop indefinitely requesting something
like:

    voltage swing: 0, pre-emphasis level: 2
    voltage swing: 1, pre-emphasis level: 2
    voltage swing: 0, pre-emphasis level: 3

over and over so max_vswing would never be reached,
drm_dp_clock_recovery_ok() would never return true and voltage_tries
would always get reset to 1. The driver sends those values to the hub
but the hub keeps requesting new values every time.

Changes in v2:
    - updated commit message (DK, Manasi)
    - defined DP_DP14_MAX_CR_TRIES (Marc)
    - made the loop iterate for max 10 times (Rodrigo, Marc)

Changes in v3:
    - changed error message to use DP_DP14_MAX_CR_TRIES

Changes in v4:
    - Updated the title to reflect the change
    - Updated the commit message
    - Added 80 attempts for pre-DP 1.4 devices

Changes in v5:
    - Removed DP_DP14_MAX_CR_TRIES from drm

v6: Updated comment to match kernel style (Rodrigo)

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Marc Herbert <marc.herbert@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720214413.29506-1-rodrigo.vivi@intel.com

drm/i915/kvmgt: Fix compilation error

gvt_pin_guest_page extracted some of the gvt_dma_map_page functionality:
commit 79e542f5af79 ("drm/i915/kvmgt: Support setting dma map for huge pages")

And yet, part of it was reintroduced in:
commit 39b4cbadb9a9 ("drm/i915/kvmgt: Check the pfn got from vfio_pin_pages")

Causing kvmgt part to no longer build. Let's remove it.

Reported-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712155330.32055-1-michal.winiarski@intel.com

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/dsc: Add missing _MMIO() from PPS registers

This patch fixes the commit -
<2efbb2f099fb> ("i915/dp/dsc: Add DSC PPS register definitions"),
which did not have _MMIO() for DSCA and DSCC.

v2: Fix typos. (manasi)

v3: Change the commit message (Rodrigo)

Cc: Rodrigi Vivi <rodrigo.vivi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532122962-9068-1-git-send-email-anusha.srivatsa@intel.com

drm/i915: Fix psr sink status report.

First of all don't try to read dpcd if PSR is not even supported.

But also, if read failed return -EIO instead of reporting via a
backchannel.

v2: fix dev_priv: At this level m->private is the connector. (CI/DK)
    don't convert dpcd read errors to EIO. (DK)

Fixes: 5b7b30864d1d ("drm/i915/psr: Split sink status into a separate debugfs node")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720003155.16290-1-rodrigo.vivi@intel.com