ZhangZhen [Thu, 27 Mar 2014 01:41:47 +0000 (09:41 +0800)]
workqueue: remove deprecated WQ_NON_REENTRANT
Tejun Heo has made WQ_NON_REENTRANT useless in the
dbf2576e37
("workqueue: make all workqueues non-reentrant"). So remove its
usages and definition.
This patch doesn't introduce any behavior changes.
tj: minor description updates.
Signed-off-by: ZhangZhen <zhenzhang.zhang@huawei.com>
Sigend-off-by: Tejun Heo <tj@kernel.org>
Acked-by: James Chapman <jchapman@katalix.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Geert Uytterhoeven [Mon, 24 Mar 2014 20:37:02 +0000 (21:37 +0100)]
workqueue: Spelling s/instensive/intensive/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Fri, 7 Mar 2014 15:24:50 +0000 (10:24 -0500)]
workqueue: remove PREPARE_[DELAYED_]WORK()
Peter Hurley noticed that since
a2c1c57be8d9 ("workqueue: consider
work function when searching for busy work items"), a work item which
gets assigned a different work function would break out of the
non-reentrancy guarantee as workqueue would consider it a different
work item.
This is fragile and extremely subtle. PREPARE_[DELAYED_]WORK() have
never been used widely and its semantics has always been somewhat
iffy. If the work item is known not to be on queue when
PREPARE_WORK() is called, there's no difference from using
INIT_WORK(). If the work item may be queued at the time of
PREPARE_WORK(), we can't really tell whether the old or new function
will be executed the next time.
We really don't want this level of subtlety in workqueue interface for
such marginal use cases. The previous patches converted all existing
users away from PREPARE_[DELAYED_]WORK(). Let's remove them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Link: http://lkml.kernel.org/g/1392493119-9277-1-git-send-email-peter@hurleysoftware.com
Tejun Heo [Fri, 7 Mar 2014 15:24:50 +0000 (10:24 -0500)]
staging/fwserial: don't use PREPARE_WORK
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
fwtty_peer->work is multiplexed with multiple work functions.
Introduce fwserial_peer_workfn() which invokes fwtty_peer->workfn and
always use it as the work function and update the users to set the
->workfn field instead of overriding the work function using
PREPARE_WORK().
It would probably be best to route this with other related updates
through the workqueue tree.
Compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Hurley <peter@hurleysoftware.com>
Tejun Heo [Fri, 7 Mar 2014 15:24:50 +0000 (10:24 -0500)]
afs: don't use PREPARE_WORK
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
afs_call->async_work is multiplexed with multiple work functions.
Introduce afs_async_workfn() which invokes afs_call->async_workfn and
always use it as the work function and update the users to set the
->async_workfn field instead of overriding the work function using
PREPARE_WORK().
It would probably be best to route this with other related updates
through the workqueue tree.
Compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Tejun Heo [Fri, 7 Mar 2014 15:24:49 +0000 (10:24 -0500)]
nvme: don't use PREPARE_WORK
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
nvme_dev->reset_work is multiplexed with multiple work functions.
Introduce nvme_reset_workfn() which invokes nvme_dev->reset_workfn and
always use it as the work function and update the users to set the
->reset_workfn field instead of overriding the work function using
PREPARE_WORK().
It would probably be best to route this with other related updates
through the workqueue tree.
Compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: linux-nvme@lists.infradead.org
Tejun Heo [Fri, 7 Mar 2014 15:24:48 +0000 (10:24 -0500)]
usb: don't use PREPARE_DELAYED_WORK
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
usb_hub->init_work is multiplexed with multiple work functions;
however, the work item is never queued while in-flight, so we can
simply use INIT_DELAYED_WORK() before each queueing.
It would probably be best to route this with other related updates
through the workqueue tree.
Lightly tested.
v2: Greg and Alan confirm that the work item is never queued while
in-flight. Simply use INIT_DELAYED_WORK().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Tejun Heo [Fri, 7 Mar 2014 15:24:48 +0000 (10:24 -0500)]
floppy: don't use PREPARE_[DELAYED_]WORK
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
floppy has been multiplexing floppy_work and fd_timer with multiple
work functions. Introduce floppy_work_workfn() and fd_timer_workfn()
which invoke floppy_work_fn and fd_timer_fn respectively and always
use the two functions as the work functions and update the users to
set floppy_work_fn and fd_timer_fn instead of overriding work
functions using PREPARE_[DELAYED_]WORK().
It would probably be best to route this with other related updates
through the workqueue tree.
Lightly tested using qemu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Tejun Heo [Fri, 7 Mar 2014 15:24:48 +0000 (10:24 -0500)]
ps3-vuart: don't use PREPARE_WORK
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
ps3_vuart wasn't overriding the work item with multiple work functions
but was using NULL for INIT_WORK() and then single PREPARE_WORK() to
set the work function. We can simply invoke INIT_WORK() with the work
function and remove the PREPARE_WORK() usage.
It would probably be best to route this with other related updates
through the workqueue tree.
Geoff: Tested on ps3 (DECR-1400).
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: cbe-oss-dev@lists.ozlabs.org
Tejun Heo [Fri, 7 Mar 2014 15:24:47 +0000 (10:24 -0500)]
wireless/rt2x00: don't use PREPARE_WORK in rt2800usb.c
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
Update rt2800usb.c to use INIT_WORK() instead of PREPARE_WORK(). As
the work item isn't in active use during rt2800usb_probe_hw(), this
doesn't cause any behavior difference.
It would probably be best to route this with other related updates
through the workqueue tree.
Only compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivo van Doorn <IvDoorn@gmail.com>
Cc: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: linux-wireless@vger.kernel.org
Tejun Heo [Fri, 7 Mar 2014 15:23:57 +0000 (10:23 -0500)]
Merge branch 'master' into wq/for-3.15
Pull 3.14-rc5 into wq/for-3.15 to receive nvme updates which the
scheduled PREPARE_DELAYED_WORK() updates depend on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Fri, 7 Mar 2014 15:20:20 +0000 (10:20 -0500)]
Merge branch 'wq/for-3.14-fixes' into wq/for-3.15
To receive
70044d71d31d ("firewire: don't use PREPARE_DELAYED_WORK").
There will be further related updates in for-3.15 branch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Fri, 7 Mar 2014 15:19:57 +0000 (10:19 -0500)]
firewire: don't use PREPARE_DELAYED_WORK
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
firewire core-device and sbp2 have been been multiplexing work items
with multiple work functions. Introduce fw_device_workfn() and
sbp2_lu_workfn() which invoke fw_device->workfn and
sbp2_logical_unit->workfn respectively and always use the two
functions as the work functions and update the users to set the
->workfn fields instead of overriding work functions using
PREPARE_DELAYED_WORK().
This fixes a variety of possible regressions since
a2c1c57be8d9
"workqueue: consider work function when searching for busy work items"
due to which fw_workqueue lost its required non-reentrancy property.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: linux1394-devel@lists.sourceforge.net
Cc: stable@vger.kernel.org # v3.9+
Cc: stable@vger.kernel.org # v3.8.2+
Cc: stable@vger.kernel.org # v3.4.60+
Cc: stable@vger.kernel.org # v3.2.40+
Linus Torvalds [Tue, 4 Mar 2014 16:44:32 +0000 (08:44 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix memory leak in ieee80211_prep_connection(), sta_info leaked on
error. From Eytan Lifshitz.
2) Unintentional switch case fallthrough in nft_reject_inet_eval(),
from Patrick McHardy.
3) Must check if payload lenth is a power of 2 in
nft_payload_select_ops(), from Nikolay Aleksandrov.
4) Fix mis-checksumming in xen-netfront driver, ip_hdr() is not in the
correct place when we invoke skb_checksum_setup(). From Wei Liu.
5) TUN driver should not advertise HW vlan offload features in
vlan_features. Fix from Fernando Luis Vazquez Cao.
6) IPV6_VTI needs to select NET_IPV_TUNNEL to avoid build errors, fix
from Steffen Klassert.
7) Add missing locking in xfrm_migrade_state_find(), we must hold the
per-namespace xfrm_state_lock while traversing the lists. Fix from
Steffen Klassert.
8) Missing locking in ath9k driver, access to tid->sched must be done
under ath_txq_lock(). Fix from Stanislaw Gruszka.
9) Fix two bugs in TCP fastopen. First respect the size argument given
to tcp_sendmsg() in the fastopen path, and secondly prevent
tcp_send_syn_data() from potentially using order-5 allocations.
From Eric Dumazet.
10) Fix handling of default neigh garbage collection params, from Jiri
Pirko.
11) Fix cwnd bloat and over-inflation of RTT when transmit segmentation
is in use. From Eric Dumazet.
12) Missing initialization of Realtek r8169 driver's statistics
seqlocks. Fix from Kyle McMartin.
13) Fix RTNL assertion failures in 802.3ad and AB ARP monitor of bonding
driver, from Ding Tianhong.
14) Bonding slave release race can cause divide by zero, fix from
Nikolay Aleksandrov.
15) Overzealous return from neigh_periodic_work() causes reachability
time to not be computed. Fix from Duain Jiong.
16) Fix regression in ipv6_find_hdr(), it should not return -ENOENT when
a specific target is specified and found. From Hans Schillstrom.
17) Fix VLAN tag stripping regression in BNA driver, from Ivan Vecera.
18) Tail loss probe can calculate bogus RTTs due to missing packet
marking on retransmit. Fix from Yuchung Cheng.
19) We cannot do skb_dst_drop() in iptunnel_pull_header() because
multicast loopback detection in later code paths need access to
skb_rtable(). Fix from Xin Long.
20) The macvlan driver regresses in that it propagates lower device
offload support disables into itself, causing severe slowdowns when
running over a bridge. Provide the software offloads always on
macvlan devices to deal with this and the regression is gone. From
Vlad Yasevich.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
macvlan: Add support for 'always_on' offload features
net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable
ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer
net: cpsw: fix cpdma rx descriptor leak on down interface
be2net: isolate TX workarounds not applicable to Skyhawk-R
be2net: Fix skb double free in be_xmit_wrokarounds() failure path
be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode
be2net: Fix to reset transparent vlan tagging
qlcnic: dcb: a couple off by one bugs
tcp: fix bogus RTT on special retransmission
hsr: off by one sanity check in hsr_register_frame_in()
can: remove CAN FD compatibility for CAN 2.0 sockets
can: flexcan: factor out soft reset into seperate funtion
can: flexcan: flexcan_remove(): add missing netif_napi_del()
can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze
can: flexcan: factor out transceiver {en,dis}able into seperate functions
can: flexcan: fix transition from and to low power mode in chip_{en,dis}able
can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails
can: flexcan: fix shutdown: first disable chip, then all interrupts
USB AX88179/178A: Support D-Link DUB-1312
...
Linus Torvalds [Tue, 4 Mar 2014 16:41:42 +0000 (08:41 -0800)]
Merge tag 'regulator-v3.14-rc5' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes here which ensure that regulators using the core
support for GPIO enables work in all cases by ensuring that helpers
are used consistently rather than open coding in places and hence not
having GPIO support in some of them"
* tag 'regulator-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Replace direct ops->disable usage
regulator: core: Replace direct ops->enable usage
Linus Torvalds [Tue, 4 Mar 2014 16:29:39 +0000 (08:29 -0800)]
Merge branch 'akpm' (patches from Andrew Morton)
Merge misc fixes from Andrew Morton.
* emailed patches from Andrew Morton akpm@linux-foundation.org>:
mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness
mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
MAINTAINERS: add and correct types of some "T:" entries
MAINTAINERS: use tab for separator
rapidio/tsi721: fix tasklet termination in dma channel release
hfsplus: fix remount issue
zram: avoid null access when fail to alloc meta
sh: prefix sh-specific "CCR" and "CCR2" by "SH_"
ocfs2: fix quota file corruption
drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX
kallsyms: fix absolute addresses for kASLR
scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression
mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking
memcg: reparent charges of children before processing parent
memcg: fix endless loop in __mem_cgroup_iter_next()
lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock
dma debug: account for cachelines and read-only mappings in overlap tracking
mm: close PageTail race
MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors
Johannes Weiner [Mon, 3 Mar 2014 23:38:41 +0000 (15:38 -0800)]
mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness
Jan Stancek reports manual page migration encountering allocation
failures after some pages when there is still plenty of memory free, and
bisected the problem down to commit
81c0a2bb515f ("mm: page_alloc: fair
zone allocator policy").
The problem is that GFP_THISNODE obeys the zone fairness allocation
batches on one hand, but doesn't reset them and wake kswapd on the other
hand. After a few of those allocations, the batches are exhausted and
the allocations fail.
Fixing this means either having GFP_THISNODE wake up kswapd, or
GFP_THISNODE not participating in zone fairness at all. The latter
seems safer as an acute bugfix, we can clean up later.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Liu Ping Fan [Mon, 3 Mar 2014 23:38:39 +0000 (15:38 -0800)]
mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
When doing some numa tests on powerpc, I triggered an oops bug. I find
it is caused by using page->_last_cpupid. It should be initialized as
"-1 & LAST_CPUPID_MASK", but not "-1". Otherwise, in task_numa_fault(),
we will miss the checking (last_cpupid == (-1 & LAST_CPUPID_MASK)). And
finally cause an oops bug in task_numa_group(), since the online cpu is
less than possible cpu. This happen with CONFIG_SPARSE_VMEMMAP disabled
Call trace:
SMP NR_CPUS=64 NUMA PowerNV
Modules linked in:
CPU: 24 PID: 804 Comm: systemd-udevd Not tainted3.13.0-rc1+ #32
task:
c000001e2746aa80 ti:
c000001e32c50000 task.ti:
c000001e32c50000
REGS:
c000001e32c53510 TRAP: 0300 Not tainted(3.13.0-rc1+)
MSR:
9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR:
28024424 XER:
20000000
CFAR:
c000000000009324 DAR:
7265717569726857 DSISR:
40000000 SOFTE: 1
NIP .task_numa_fault+0x1470/0x2370
LR .task_numa_fault+0x1468/0x2370
Call Trace:
.task_numa_fault+0x1468/0x2370 (unreliable)
.do_numa_page+0x480/0x4a0
.handle_mm_fault+0x4ec/0xc90
.do_page_fault+0x3a8/0x890
handle_page_fault+0x10/0x30
Instruction dump:
3c82fefb 3884b138 48d9cff1 60000000 48000574 3c62fefb3863af78 3c82fefb
3884b138 48d9cfd5 60000000 e93f0100 <
812902e4>
7d2907b45529063e 7d2a07b4
---[ end trace
15f2510da5ae07cf ]---
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 3 Mar 2014 23:38:38 +0000 (15:38 -0800)]
MAINTAINERS: add and correct types of some "T:" entries
Tree location entries should start with the appropriate type.
Add git to some, hg to another.
Neaten tree type description.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 3 Mar 2014 23:38:37 +0000 (15:38 -0800)]
MAINTAINERS: use tab for separator
Convert whitespace to single tab for separators.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Bounine [Mon, 3 Mar 2014 23:38:36 +0000 (15:38 -0800)]
rapidio/tsi721: fix tasklet termination in dma channel release
This patch is a modification of the patch originally proposed by
Xiaotian Feng <xtfeng@gmail.com>: https://lkml.org/lkml/2012/11/5/413
This new version disables DMA channel interrupts and ensures that the
tasklet wil not be scheduled again before calling tasklet_kill().
Unfortunately the updated patch was not released at that time due to
planned rework of Tsi721 mport driver to use threaded interrupts (which
has yet to happen). Recently the issue was reported again:
https://lkml.org/lkml/2014/2/19/762.
Description from the original Xiaotian's patch:
"Some drivers use tasklet_disable in device remove/release process,
tasklet_disable will inc tasklet->count and return. If the tasklet is
not handled yet under some softirq pressure, the tasklet will be
placed on the tasklet_vec, never have a chance to be excuted. This
might lead to a heavy loaded ksoftirqd, wakeup with pending_softirq,
but tasklet is disabled. tasklet_kill should be used in this case."
This patch is applicable to kernel versions starting from v3.5.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: <stable@vger.kernel.org> [3.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vyacheslav Dubeyko [Mon, 3 Mar 2014 23:38:35 +0000 (15:38 -0800)]
hfsplus: fix remount issue
Current implementation of HFS+ driver has small issue with remount
option. Namely, for example, you are unable to remount from RO mode
into RW mode by means of command "mount -o remount,rw /dev/loop0
/mnt/hfsplus". Trying to execute sequence of commands results in an
error message:
mount /dev/loop0 /mnt/hfsplus
mount -o remount,ro /dev/loop0 /mnt/hfsplus
mount -o remount,rw /dev/loop0 /mnt/hfsplus
mount: you must specify the filesystem type
mount -t hfsplus -o remount,rw /dev/loop0 /mnt/hfsplus
mount: /mnt/hfsplus not mounted or bad option
The reason of such issue is failure of mount syscall:
mount("/dev/loop0", "/mnt/hfsplus", 0x2282a60, MS_MGC_VAL|MS_REMOUNT, NULL) = -1 EINVAL (Invalid argument)
Namely, hfsplus_parse_options_remount() method receives empty "input"
argument and return false in such case. As a result, hfsplus_remount()
returns -EINVAL error code.
This patch fixes the issue by means of return true for the case of empty
"input" argument in hfsplus_parse_options_remount() method.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Mon, 3 Mar 2014 23:38:34 +0000 (15:38 -0800)]
zram: avoid null access when fail to alloc meta
zram_meta_alloc could fail so caller should check it. Otherwise, your
system will hang.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Mon, 3 Mar 2014 23:38:33 +0000 (15:38 -0800)]
sh: prefix sh-specific "CCR" and "CCR2" by "SH_"
Commit
bcf24e1daa94 ("mmc: omap_hsmmc: use the generic config for
omap2plus devices"), enabled the build for other platforms for compile
testing.
sh-allmodconfig now fails with:
include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant
make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1
This happens because SuperH #defines "CCR", which is one of the enum
values in include/linux/omap-dma.h. There's a similar issue with "CCR2"
on sh2a.
As "CCR" and "CCR2" are too generic names for global #defines, prefix
them with "SH_" to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Mon, 3 Mar 2014 23:38:32 +0000 (15:38 -0800)]
ocfs2: fix quota file corruption
Global quota files are accessed from different nodes. Thus we cannot
cache offset of quota structure in the quota file after we drop our node
reference count to it because after that moment quota structure may be
freed and reallocated elsewhere by a different node resulting in
corruption of quota file.
Fix the problem by clearing dq_off when we are releasing dquot structure.
We also remove the DB_READ_B handling because it is useless -
DQ_ACTIVE_B is set iff DQ_READ_B is set.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vikas Sajjan [Mon, 3 Mar 2014 23:38:31 +0000 (15:38 -0800)]
drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX
On exynos5250, exynos5420 and exynos5260 it was observed that, after 1
cycle of S2R, the rtc-tick occurs at a very fast rate as compared to the
rtc-tick occuring before S2R.
This patch fixes the above issue by correcting the wrong way of
save/restore of S3C2410_TICNT for TYPE_S3C64XX.
Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Honig [Mon, 3 Mar 2014 23:38:30 +0000 (15:38 -0800)]
kallsyms: fix absolute addresses for kASLR
Currently symbols that are absolute addresses are incorrectly displayed
in /proc/kallsyms if the kernel is loaded with kASLR.
The problem was that the scripts/kallsyms.c file which generates the
array of symbol names and addresses uses an relocatable value for all
symbols, even absolute symbols. This patch fixes that.
Several kallsyms output in different boot states for comparison:
$ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.nokaslr
0000000000000000 D __per_cpu_start
0000000000014280 D __per_cpu_end
ffffffff810001c8 T _stext
$ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr1
000000001f200000 D __per_cpu_start
000000001f214280 D __per_cpu_end
ffffffffa02001c8 T _stext
$ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr2
000000000d400000 D __per_cpu_start
000000000d414280 D __per_cpu_end
ffffffff8e4001c8 T _stext
$ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr-fixed
0000000000000000 D __per_cpu_start
0000000000014280 D __per_cpu_end
ffffffffadc001c8 T _stext
Signed-off-by: Andy Honig <ahonig@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel M. Weeks [Mon, 3 Mar 2014 23:38:28 +0000 (15:38 -0800)]
scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression
LZ4 as implemented in the kernel differs from the default method now
used by the reference implementation of LZ4. Until the in-kernel method
is updated to support the new default, passing the legacy flag (-l) to
the compressor is necessary. Without this flag the kernel-generated,
LZ4-compressed initramfs is junk.
Kyungsik said:
: It seems that lz4 supports legacy format with the same option as lz4c
: does. Just looking at the first few bytes of lz4 compressed image, we can
: see whether it is new format or not.
:
: It shows new format magic number without this patch. New format magic
: number is 0x184d2204.
:
: $ hexdump -C ./initramfs_data.cpio.lz4 |more
:
00000000 04 22 4d 18 64 70 b9 69 (Little Endian)
: ...
:
: Currently kernel supports legacy format only.
Signed-off-by: Daniel M. Weeks <dan@danweeks.net>
Cc: Michal Marek <mmarek@suse.cz>
Acked-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Mon, 3 Mar 2014 23:38:27 +0000 (15:38 -0800)]
mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking
Daniel Borkmann reported a VM_BUG_ON assertion failing:
------------[ cut here ]------------
kernel BUG at mm/mlock.c:528!
invalid opcode: 0000 [#1] SMP
Modules linked in: ccm arc4 iwldvm [...]
video
CPU: 3 PID: 2266 Comm: netsniff-ng Not tainted 3.14.0-rc2+ #8
Hardware name: LENOVO 2429BP3/2429BP3, BIOS G4ET37WW (1.12 ) 05/29/2012
task:
ffff8801f87f9820 ti:
ffff88002cb44000 task.ti:
ffff88002cb44000
RIP: 0010:[<
ffffffff81171ad0>] [<
ffffffff81171ad0>] munlock_vma_pages_range+0x2e0/0x2f0
Call Trace:
do_munmap+0x18f/0x3b0
vm_munmap+0x41/0x60
SyS_munmap+0x22/0x30
system_call_fastpath+0x1a/0x1f
RIP munlock_vma_pages_range+0x2e0/0x2f0
---[ end trace
a0088dcf07ae10f2 ]---
because munlock_vma_pages_range() thinks it's unexpectedly in the middle
of a THP page. This can be reproduced with default config since 3.11
kernels. A reproducer can be found in the kernel's selftest directory
for networking by running ./psock_tpacket.
The problem is that an order=2 compound page (allocated by
alloc_one_pg_vec_page() is part of the munlocked VM_MIXEDMAP vma (mapped
by packet_mmap()) and mistaken for a THP page and assumed to be order=9.
The checks for THP in munlock came with commit
ff6a6da60b89 ("mm:
accelerate munlock() treatment of THP pages"), i.e. since 3.9, but did
not trigger a bug. It just makes munlock_vma_pages_range() skip such
compound pages until the next 512-pages-aligned page, when it encounters
a head page. This is however not a problem for vma's where mlocking has
no effect anyway, but it can distort the accounting.
Since commit
7225522bb429 ("mm: munlock: batch non-THP page isolation
and munlock+putback using pagevec") this can trigger a VM_BUG_ON in
PageTransHuge() check.
This patch fixes the issue by adding VM_MIXEDMAP flag to VM_SPECIAL, a
list of flags that make vma's non-mlockable and non-mergeable. The
reasoning is that VM_MIXEDMAP vma's are similar to VM_PFNMAP, which is
already on the VM_SPECIAL list, and both are intended for non-LRU pages
where mlocking makes no sense anyway. Related Lkml discussion can be
found in [2].
[1] tools/testing/selftests/net/psock_tpacket
[2] https://lkml.org/lkml/2014/1/10/427
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Reported-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: John David Anglin <dave.anglin@bell.net>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Tested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [3.11.x+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Filipe Brandenburger [Mon, 3 Mar 2014 23:38:25 +0000 (15:38 -0800)]
memcg: reparent charges of children before processing parent
Sometimes the cleanup after memcg hierarchy testing gets stuck in
mem_cgroup_reparent_charges(), unable to bring non-kmem usage down to 0.
There may turn out to be several causes, but a major cause is this: the
workitem to offline parent can get run before workitem to offline child;
parent's mem_cgroup_reparent_charges() circles around waiting for the
child's pages to be reparented to its lrus, but it's holding
cgroup_mutex which prevents the child from reaching its
mem_cgroup_reparent_charges().
Further testing showed that an ordered workqueue for cgroup_destroy_wq
is not always good enough: percpu_ref_kill_and_confirm's call_rcu_sched
stage on the way can mess up the order before reaching the workqueue.
Instead, when offlining a memcg, call mem_cgroup_reparent_charges() on
all its children (and grandchildren, in the correct order) to have their
charges reparented first.
Fixes: e5fca243abae ("cgroup: use a dedicated workqueue for cgroup destruction")
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [v3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Mon, 3 Mar 2014 23:38:24 +0000 (15:38 -0800)]
memcg: fix endless loop in __mem_cgroup_iter_next()
Commit
0eef615665ed ("memcg: fix css reference leak and endless loop in
mem_cgroup_iter") got the interaction with the commit a few before it
d8ad30559715 ("mm/memcg: iteration skip memcgs not yet fully
initialized") slightly wrong, and we didn't notice at the time.
It's elusive, and harder to get than the original, but for a couple of
days before rc1, I several times saw a endless loop similar to that
supposedly being fixed.
This time it was a tighter loop in __mem_cgroup_iter_next(): because we
can get here when our root has already been offlined, and the ordering
of conditions was such that we then just cycled around forever.
Fixes: 0eef615665ed ("memcg: fix css reference leak and endless loop in mem_cgroup_iter").
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Mon, 3 Mar 2014 23:38:23 +0000 (15:38 -0800)]
lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock
Running fsx on tmpfs with concurrent memhog-swapoff-swapon, lots of
BUG: sleeping function called from invalid context at kernel/fork.c:606
in_atomic(): 0, irqs_disabled(): 0, pid: 1394, name: swapoff
1 lock held by swapoff/1394:
#0: (rcu_read_lock){.+.+.+}, at: [<
ffffffff812520a1>] radix_tree_locate_item+0x1f/0x2b6
followed by
================================================
[ BUG: lock held when returning to user space! ]
3.14.0-rc1 #3 Not tainted
------------------------------------------------
swapoff/1394 is leaving the kernel with locks still held!
1 lock held by swapoff/1394:
#0: (rcu_read_lock){.+.+.+}, at: [<
ffffffff812520a1>] radix_tree_locate_item+0x1f/0x2b6
after which the system recovered nicely.
Whoops, I long ago forgot the rcu_read_unlock() on one unlikely branch.
Fixes
e504f3fdd63d ("tmpfs radix_tree: locate_item to speed up swapoff")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Mon, 3 Mar 2014 23:38:21 +0000 (15:38 -0800)]
dma debug: account for cachelines and read-only mappings in overlap tracking
While debug_dma_assert_idle() checks if a given *page* is actively
undergoing dma the valid granularity of a dma mapping is a *cacheline*.
Sander's testing shows that the warning message "DMA-API: exceeded 7
overlapping mappings of pfn..." is falsely triggering. The test is
simply mapping multiple cachelines in a given page.
Ultimately we want overlap tracking to be valid as it is a real api
violation, so we need to track active mappings by cachelines. Update
the active dma tracking to use the page-frame-relative cacheline of the
mapping as the key, and update debug_dma_assert_idle() to check for all
possible mapped cachelines for a given page.
However, the need to track active mappings is only relevant when the
dma-mapping is writable by the device. In fact it is fairly standard
for read-only mappings to have hundreds or thousands of overlapping
mappings at once. Limiting the overlap tracking to writable
(!DMA_TO_DEVICE) eliminates this class of false-positive overlap
reports.
Note, the radix gang lookup is sub-optimal. It would be best if it
stopped fetching entries once the search passed a page boundary.
Nevertheless, this implementation does not perturb the original net_dma
failing case. That is to say the extra overhead does not show up in
terms of making the failing case pass due to a timing change.
References:
http://marc.info/?l=linux-netdev&m=
139232263419315&w=2
http://marc.info/?l=linux-netdev&m=
139217088107122&w=2
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Dave Jones <davej@redhat.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Mon, 3 Mar 2014 23:38:18 +0000 (15:38 -0800)]
mm: close PageTail race
Commit
bf6bddf1924e ("mm: introduce compaction and migration for
ballooned pages") introduces page_count(page) into memory compaction
which dereferences page->first_page if PageTail(page).
This results in a very rare NULL pointer dereference on the
aforementioned page_count(page). Indeed, anything that does
compound_head(), including page_count() is susceptible to racing with
prep_compound_page() and seeing a NULL or dangling page->first_page
pointer.
This patch uses Andrea's implementation of compound_trans_head() that
deals with such a race and makes it the default compound_head()
implementation. This includes a read memory barrier that ensures that
if PageTail(head) is true that we return a head page that is neither
NULL nor dangling. The patch then adds a store memory barrier to
prep_compound_page() to ensure page->first_page is set.
This is the safest way to ensure we see the head page that we are
expecting, PageTail(page) is already in the unlikely() path and the
memory barriers are unfortunately required.
Hugetlbfs is the exception, we don't enforce a store memory barrier
during init since no race is possible.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Holger Kiehl <Holger.Kiehl@dwd.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Borislav Petkov [Mon, 3 Mar 2014 23:38:17 +0000 (15:38 -0800)]
MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors
We're more or less collecting EDAC patches already anyway so let's hold it
down so that get_maintainer sees it too.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlad Yasevich [Mon, 3 Mar 2014 20:33:53 +0000 (15:33 -0500)]
macvlan: Add support for 'always_on' offload features
Macvlan currently inherits all of its features from the lower
device. When lower device disables offload support, this causes
macvlan to disable offload support as well. This causes
performance regression when using macvlan/macvtap in bridge
mode.
It can be easily demonstrated by creating 2 namespaces using
macvlan in bridge mode and running netperf between them:
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 20.00 1204.61
To restore the performance, we add software offload features
to the list of "always_on" features for macvlan. This way
when a namespace or a guest using macvtap initially sends a
packet, this packet will not be segmented at macvlan level.
It will only be segmented when macvlan sends the packet
to the lower device.
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 20.00 5507.35
Fixes: 6acf54f1cf0a6747bac9fea26f34cfc5a9029523 (macvtap: Add support of packet capture on macvtap device.)
Fixes: 797f87f83b60685ff8a13fa0572d2f10393c50d3 (macvlan: fix netdev feature propagation from lower device)
CC: Florian Westphal <fw@strlen.de>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Mar 2014 21:42:47 +0000 (16:42 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless
John W. Linville says:
====================
Please pull this batch of fixes intended for the 3.14 stream...
For the mac80211 bits, Johannes says:
"This time I have a fix to get out of an 'infinite error state' in case
regulatory domain updates failed and two fixes for VHT associations: one
to not disconnect immediately when the AP uses more bandwidth than the
new regdomain would allow after a change due to association country
information getting used, and one for an issue in the code where
mac80211 doesn't correctly ignore a reserved field and then uses an HT
instead of VHT association."
For the iwlwifi bits, Emmanuel says:
"Johannes fixes a long standing bug in the AMPDU status reporting.
Max fixes the listen time which was way too long and causes trouble
to several APs."
Along with those, Bing Zhao marks the mwifiex_usb driver as _not_
supporting USB autosuspend after a number of problems with that have
been reported.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 3 Mar 2014 16:23:04 +0000 (17:23 +0100)]
net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable
RFC4895 introduced AUTH chunks for SCTP; during the SCTP
handshake RANDOM; CHUNKS; HMAC-ALGO are negotiated (CHUNKS
being optional though):
---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
-------------------- COOKIE-ECHO -------------------->
<-------------------- COOKIE-ACK ---------------------
A special case is when an endpoint requires COOKIE-ECHO
chunks to be authenticated:
---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
------------------ AUTH; COOKIE-ECHO ---------------->
<-------------------- COOKIE-ACK ---------------------
RFC4895, section 6.3. Receiving Authenticated Chunks says:
The receiver MUST use the HMAC algorithm indicated in
the HMAC Identifier field. If this algorithm was not
specified by the receiver in the HMAC-ALGO parameter in
the INIT or INIT-ACK chunk during association setup, the
AUTH chunk and all the chunks after it MUST be discarded
and an ERROR chunk SHOULD be sent with the error cause
defined in Section 4.1. [...] If no endpoint pair shared
key has been configured for that Shared Key Identifier,
all authenticated chunks MUST be silently discarded. [...]
When an endpoint requires COOKIE-ECHO chunks to be
authenticated, some special procedures have to be followed
because the reception of a COOKIE-ECHO chunk might result
in the creation of an SCTP association. If a packet arrives
containing an AUTH chunk as a first chunk, a COOKIE-ECHO
chunk as the second chunk, and possibly more chunks after
them, and the receiver does not have an STCB for that
packet, then authentication is based on the contents of
the COOKIE-ECHO chunk. In this situation, the receiver MUST
authenticate the chunks in the packet by using the RANDOM
parameters, CHUNKS parameters and HMAC_ALGO parameters
obtained from the COOKIE-ECHO chunk, and possibly a local
shared secret as inputs to the authentication procedure
specified in Section 6.3. If authentication fails, then
the packet is discarded. If the authentication is successful,
the COOKIE-ECHO and all the chunks after the COOKIE-ECHO
MUST be processed. If the receiver has an STCB, it MUST
process the AUTH chunk as described above using the STCB
from the existing association to authenticate the
COOKIE-ECHO chunk and all the chunks after it. [...]
Commit
bbd0d59809f9 introduced the possibility to receive
and verification of AUTH chunk, including the edge case for
authenticated COOKIE-ECHO. On reception of COOKIE-ECHO,
the function sctp_sf_do_5_1D_ce() handles processing,
unpacks and creates a new association if it passed sanity
checks and also tests for authentication chunks being
present. After a new association has been processed, it
invokes sctp_process_init() on the new association and
walks through the parameter list it received from the INIT
chunk. It checks SCTP_PARAM_RANDOM, SCTP_PARAM_HMAC_ALGO
and SCTP_PARAM_CHUNKS, and copies them into asoc->peer
meta data (peer_random, peer_hmacs, peer_chunks) in case
sysctl -w net.sctp.auth_enable=1 is set. If in INIT's
SCTP_PARAM_SUPPORTED_EXT parameter SCTP_CID_AUTH is set,
peer_random != NULL and peer_hmacs != NULL the peer is to be
assumed asoc->peer.auth_capable=1, in any other case
asoc->peer.auth_capable=0.
Now, if in sctp_sf_do_5_1D_ce() chunk->auth_chunk is
available, we set up a fake auth chunk and pass that on to
sctp_sf_authenticate(), which at latest in
sctp_auth_calculate_hmac() reliably dereferences a NULL pointer
at position 0..0008 when setting up the crypto key in
crypto_hash_setkey() by using asoc->asoc_shared_key that is
NULL as condition key_id == asoc->active_key_id is true if
the AUTH chunk was injected correctly from remote. This
happens no matter what net.sctp.auth_enable sysctl says.
The fix is to check for net->sctp.auth_enable and for
asoc->peer.auth_capable before doing any operations like
sctp_sf_authenticate() as no key is activated in
sctp_auth_asoc_init_active_key() for each case.
Now as RFC4895 section 6.3 states that if the used HMAC-ALGO
passed from the INIT chunk was not used in the AUTH chunk, we
SHOULD send an error; however in this case it would be better
to just silently discard such a maliciously prepared handshake
as we didn't even receive a parameter at all. Also, as our
endpoint has no shared key configured, section 6.3 says that
MUST silently discard, which we are doing from now onwards.
Before calling sctp_sf_pdiscard(), we need not only to free
the association, but also the chunk->auth_chunk skb, as
commit
bbd0d59809f9 created a skb clone in that case.
I have tested this locally by using netfilter's nfqueue and
re-injecting packets into the local stack after maliciously
modifying the INIT chunk (removing RANDOM; HMAC-ALGO param)
and the SCTP packet containing the COOKIE_ECHO (injecting
AUTH chunk before COOKIE_ECHO). Fixed with this patch applied.
Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <yasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Mar 2014 21:05:04 +0000 (16:05 -0500)]
Merge tag 'linux-can-fixes-for-3.14-
20140303' of git://gitorious.org/linux-can/linux-can
linux-can-fixes-for-3.14-
20140303
Marc Kleine-Budde says:
====================
this is a pull request of 8 patches. Oliver Hartkopp contributes a patch which
removes the CAN FD compatibility for CAN 2.0 sockets, as it turns out that this
compatibility has some conceptual cornercases. The remaining 7 patches are by
me, they address a problem in the flexcan driver. When shutting down the
interface ("ifconfig can0 down") under heavy network load the whole system will
hang. This series reworks the actual sequence in close() and the transition
from and to the low power modes of the CAN controller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 3 Mar 2014 12:18:36 +0000 (20:18 +0800)]
ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer
when ip_tunnel process multicast packets, it may check if the packet is looped
back packet though 'rt_is_output_route(skb_rtable(skb))' in ip_tunnel_rcv(),
but before that , skb->_skb_refdst has been dropped in iptunnel_pull_header(),
so which leads to a panic.
fix the bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Schuyler Patton [Mon, 3 Mar 2014 10:49:06 +0000 (16:19 +0530)]
net: cpsw: fix cpdma rx descriptor leak on down interface
This patch fixes a CPDMA RX Descriptor leak that occurs after taking
the interface down when the CPSW is in Dual MAC mode. Previously
the CPSW_ALE port was left open up which causes packets to be received
and processed by the RX interrupt handler and were passed to the
non active network interface where they were ignored.
The fix is for the slave_stop function of the selected interface
to disable the respective CPSW_ALE Port from forwarding packets. This
blocks traffic from being received on the inactive interface.
Signed-off-by: Schuyler Patton <spatton@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 3 Mar 2014 08:55:38 +0000 (14:25 +0530)]
be2net: isolate TX workarounds not applicable to Skyhawk-R
Some of TX workarounds in be_xmit_workarounds() routine
are not applicable (and result in HW errors) to Skyhawk-R chip.
Isolate BE3-R/Lancer specific workarounds to a separate routine.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 3 Mar 2014 08:55:07 +0000 (14:25 +0530)]
be2net: Fix skb double free in be_xmit_wrokarounds() failure path
skb_padto(), skb_share_check() and __vlan_put_tag() routines free
skb when they return an error. This patch fixes be_xmit_workarounds()
to not free skb again in such cases.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Somnath kotur [Mon, 3 Mar 2014 08:54:43 +0000 (14:24 +0530)]
be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode
We should clear promiscuous bits in adapter->flags while disabling promiscuous
mode. Else we will not put interface back into VLAN promisc mode if the vlans
already added exceeds the maximum limit.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Somnath Kotur [Mon, 3 Mar 2014 08:54:20 +0000 (14:24 +0530)]
be2net: Fix to reset transparent vlan tagging
For disabling transparent tagging issue SET_HSW_CONFIG with pvid_valid=1
and pvid=0xFFFF and not with the default pvid as this case would fail in Lancer.
Hence removing the get_hsw_config call from be_vf_setup() as it's
only use of getting default pvid is no longer needed.
Also do proper housekeeping only if the FW command succeeds.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Sat, 1 Mar 2014 13:54:36 +0000 (16:54 +0300)]
qlcnic: dcb: a couple off by one bugs
The ->tc_cfg[] array has QLC_DCB_MAX_TC (8) elements so the check is
off by one. These functions are always called with valid values though
so it doesn't affect how the code works.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Sat, 1 Mar 2014 00:42:26 +0000 (16:42 -0800)]
tcp: fix bogus RTT on special retransmission
RTT may be bogus with tall loss probe (TLP) when a packet
is retransmitted and latter (s)acked without TCPCB_SACKED_RETRANS flag.
For example, TLP calls __tcp_retransmit_skb() instead of
tcp_retransmit_skb(). The skb timestamps are updated but the sacked
flag is not marked with TCPCB_SACKED_RETRANS. As a result we'll
get bogus RTT in tcp_clean_rtx_queue() or in tcp_sacktag_one() on
spurious retransmission.
The fix is to apply the sticky flag TCP_EVER_RETRANS to enforce Karn's
check on RTT sampling. However this will disable F-RTO if timeout occurs
after TLP, by resetting undo_marker in tcp_enter_loss(). We relax this
check to only if any pending retransmists are still in-flight.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 28 Feb 2014 23:18:57 +0000 (02:18 +0300)]
hsr: off by one sanity check in hsr_register_frame_in()
This is a sanity check and we never pass invalid values so this patch
doesn't change anything. However the node->time_in[] array has
HSR_MAX_SLAVE (2) elements and not HSR_MAX_DEV (3).
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Mon, 3 Mar 2014 19:34:45 +0000 (14:34 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem
Linus Torvalds [Mon, 3 Mar 2014 18:49:24 +0000 (10:49 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes, most of them SCHED_DEADLINE fallout"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Prevent rt_time growth to infinity
sched/deadline: Switch CPU's presence test order
sched/deadline: Cleanup RT leftovers from {inc/dec}_dl_migration
sched: Fix double normalization of vruntime
Linus Torvalds [Mon, 3 Mar 2014 18:48:48 +0000 (10:48 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull liblockdep fixes from Ingo Molnar:
"A handful of build fixes for liblockdep"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/liblockdep: Use realpath for srctree and objtree
tools/liblockdep: Add a stub for new rcu_is_watching
tools/liblockdep: Mark runtests.sh as executable
tools/liblockdep: Add include directory to allow tests to compile
tools/liblockdep: Fix include of asm/hash.h
tools/liblockdep: Fix initialization code path
Linus Torvalds [Mon, 3 Mar 2014 18:47:46 +0000 (10:47 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Pull clk framework fixes from Mike Turquette:
"Clock framework and driver fixes, all of which fix user-visible
regressions.
There is a single framework fix that prevents dereferencing a NULL
pointer when calling clk_get. The range of fixes for clock driver
regressions spans memory leak fixes, touching the wrong registers that
cause things to explode, misconfigured clock rates that result in
non-responsive devices and even some boot failures. The most benign
fix is DT binding doc typo. It is a stable ABI exposed from the
kernel that was introduced in -rc1, so best to fix it now"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: (25 commits)
clk:at91: Fix memory leak in of_at91_clk_master_setup()
clk: nomadik: fix multiplatform problem
clk: Correct handling of NULL clk in __clk_{get, put}
clk: shmobile: Fix typo in MSTP clock DT bindings
clk: shmobile: rcar-gen2: Fix qspi divisor
clk: shmobile: rcar-gen2: Fix clock parent for all non-PLL clocks
clk: tegra124: remove gr2d and gr3d clocks
clk: tegra: Fix vic03 mux index
clk: shmobile: rcar-gen2: Fix qspi divisor
clk: shmobile: rcar-gen2: Fix clock parent all non-PLL clocks
clk: tegra: use max divider if divider overflows
clk: tegra: cclk_lp has a pllx/2 divider
clk: tegra: fix sdmmc clks on Tegra1x4
clk: tegra: fix host1x clock on Tegra124
clk: tegra: PLLD2 fixes for hdmi
clk: tegra: Fix PLLD mnp table
clk: tegra: Fix PLLP rate table
clk: tegra: Correct clock number for UARTE
clk: tegra: Add missing Tegra20 fuse clks
ARM: keystone: dts: fix clkvcp3 control register address
...
Oliver Hartkopp [Sat, 1 Mar 2014 14:31:53 +0000 (15:31 +0100)]
can: remove CAN FD compatibility for CAN 2.0 sockets
In commit
e2d265d3b587 (canfd: add support for CAN FD in CAN_RAW sockets)
CAN FD frames with a payload length up to 8 byte are passed to legacy
sockets where the CAN FD support was not enabled by the application.
After some discussions with developers at a fair this well meant feature
leads to confusion as no clean switch for CAN / CAN FD is provided to the
application programmer. Additionally a compatibility like this for legacy
CAN_RAW sockets requires some compatibility handling for the sending, e.g.
make CAN2.0 frames a CAN FD frame with BRS at transmission time (?!?).
This will become a mess when people start to develop applications with
real CAN FD hardware. This patch reverts the bad compatibility code
together with the documentation describing the removed feature.
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 28 Feb 2014 14:16:59 +0000 (15:16 +0100)]
can: flexcan: factor out soft reset into seperate funtion
This patch moves the soft reset into a seperate function.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 28 Feb 2014 19:48:36 +0000 (20:48 +0100)]
can: flexcan: flexcan_remove(): add missing netif_napi_del()
This patch adds the missing netif_napi_del() to the flexcan_remove() function.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 28 Feb 2014 16:08:21 +0000 (17:08 +0100)]
can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze
This patch factors out freeze and unfreeze of the CAN core into seperate
functions. Experiments have shown that the transition from and to freeze mode
may take several microseconds, especially the time entering the freeze mode
depends on the current bitrate.
This patch adds a while loop which polls the Freeze Mode ACK bit (FRZ_ACK) that
indicates a successfull mode change. If the function runs into a timeout a
error value is returned.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 28 Feb 2014 16:18:27 +0000 (17:18 +0100)]
can: flexcan: factor out transceiver {en,dis}able into seperate functions
This patch moves the transceiver enable and disable into seperate functions,
where the NULL pointer check is hidden.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 28 Feb 2014 14:30:18 +0000 (15:30 +0100)]
can: flexcan: fix transition from and to low power mode in chip_{en,dis}able
In flexcan_chip_enable() and flexcan_chip_disable() fixed delays are used.
Experiments have shown that the transition from and to low power mode may take
several microseconds.
This patch adds a while loop which polls the Low Power Mode ACK bit (LPM_ACK)
that indicates a successfull mode change. If the function runs into a timeout a
error value is returned.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 28 Feb 2014 13:52:01 +0000 (14:52 +0100)]
can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails
If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed,
this patch adds the missing cleanup.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Wed, 19 Feb 2014 11:00:51 +0000 (12:00 +0100)]
can: flexcan: fix shutdown: first disable chip, then all interrupts
When shutting down the CAN interface (ifconfig canX down) during high CAN bus
loads, the CAN core might hang and freeze the whole CPU.
This patch fixes the shutdown sequence by first disabling the CAN core then
disabling all interrupts.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linus Torvalds [Mon, 3 Mar 2014 02:56:16 +0000 (18:56 -0800)]
Linux 3.14-rc5
Gerry Demaret [Fri, 28 Feb 2014 17:50:46 +0000 (18:50 +0100)]
USB AX88179/178A: Support D-Link DUB-1312
Add the USB device ID for the D-Link DUB-1312 USB 3.0 to Gigabit Ethernet
Adapter to the AX88179/178A driver.
Signed-off-by: Gerry Demaret <gerry@tigron.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hauke Mehrtens [Sun, 2 Mar 2014 16:29:34 +0000 (17:29 +0100)]
b44: always set duplex mode why phy changes
Without this patch b44_check_phy() was called when the phy called the
adjust callback. This method only change the mac duplex mode when the
carrier was off. When the phy changed the duplex mode after the carrier
was on the mac was not changed. This happened when an external phy was
used.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hauke Mehrtens [Sun, 2 Mar 2014 16:29:33 +0000 (17:29 +0100)]
b44: add calls to phy_{start,stop}
When support for external phys was added to b44, the calls to start and
stop the phy were missing in the mac driver. This adds the calls to
phy_start() and phy_stop().
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 2 Mar 2014 23:25:45 +0000 (15:25 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx
and tegra fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
MAINTAINERS: update drm git tree entry
MAINTAINERS: add entry for drm radeon driver
drm/tegra: Add guard to avoid double disable/enable of RGB outputs
gpu: host1x: do not check previously handled gathers
drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
Linus Torvalds [Sun, 2 Mar 2014 23:15:07 +0000 (15:15 -0800)]
Merge tag 'usb-3.14-rc5' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 2 USB patches for 3.14-rc5, one a new device id, and the
other fixes a reported problem with threaded irqs and the USB EHCI
driver"
* tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: ehci: fix deadlock when threadirqs option is used
USB: ftdi_sio: add Cressi Leonardo PID
Linus Torvalds [Sun, 2 Mar 2014 23:13:41 +0000 (15:13 -0800)]
Merge tag 'driver-core-3.14-rc5' of git://git./linux/kernel/git/gregkh/driver-core
Pull sysfs fix from Greg KH:
"Here is a single sysfs fix for 3.14-rc5. It fixes a reported problem
with the namespace code in sysfs"
* tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: fix namespace refcnt leak
Linus Torvalds [Sun, 2 Mar 2014 23:12:54 +0000 (15:12 -0800)]
Merge tag 'staging-3.14-rc5' of git://git./linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg KH:
"Here are a few IIO fixes, and a new device id for a staging driver for
3.14-rc5. All have been in linux-next for a while, I did a final
merge to get the IIO fixes into this tree, they were incorrectly in
the char-misc tree for a few weeks, and I forgot to tell you to pull
them from there. This makes it a single pull request for you"
* tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID
staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
iio:gyro: bug on L3GD20H gyroscope support
iio: cm32181: Change cm32181 ambient light sensor driver
iio: cm36651: Fix read/write integration time function.
Dave Airlie [Sun, 2 Mar 2014 23:04:41 +0000 (09:04 +1000)]
Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
more radeon fixes
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
Greg Kroah-Hartman [Sun, 2 Mar 2014 22:04:01 +0000 (14:04 -0800)]
Merge iio fixes into staging-linus
These I forgot about before, but need to get into 3.14-final.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 2 Mar 2014 17:37:07 +0000 (11:37 -0600)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes, most of them on the tooling side"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix strict alias issue for find_first_bit
perf tools: fix BFD detection on opensuse
perf: Fix hotplug splat
perf/x86: Fix event scheduling
perf symbols: Destroy unused symsrcs
perf annotate: Check availability of annotate when processing samples
Dave Airlie [Sun, 2 Mar 2014 10:54:31 +0000 (20:54 +1000)]
Merge tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of minor fixes.
Pull request of 2014-03-02
* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
Alexey Khoroshilov [Fri, 28 Feb 2014 21:20:18 +0000 (01:20 +0400)]
drm/vmwgfx: avoid null pointer dereference at failure paths
vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Thomas Hellstrom [Fri, 28 Feb 2014 12:33:21 +0000 (13:33 +0100)]
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.
Also update driver date.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Thomas Hellstrom [Fri, 28 Feb 2014 12:31:04 +0000 (13:31 +0100)]
drm/vmwgfx: Remove some unused surface formats
These formats are deprecated.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Linus Torvalds [Sun, 2 Mar 2014 04:48:14 +0000 (22:48 -0600)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"The VMCOREINFO patch I'll pushing for this release to avoid having a
release with kASLR and but without that information.
I was hoping to include the FPU patches from Suresh, but ran into a
problem (see other thread); will try to make them happen next week"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kaslr: add missed "static" declarations
x86, kaslr: export offset in VMCOREINFO ELF notes
Linus Torvalds [Sun, 2 Mar 2014 03:33:09 +0000 (21:33 -0600)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the series are bugfixes for qla2xxx target NPIV support
that went in for v3.14-rc1. Also included are a few DIF related
fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi
protocol version related fix from Venkatesh.
Also just a heads up that a series to address a number of issues with
iser-target active I/O reset/shutdown is still being tested, and will
be included in a separate -rc6 PULL request"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
vhost/scsi: Check LUN structure byte 0 is set to 1, per spec
qla2xxx: Fix kernel panic on selective retransmission request
Target/sbc: Don't use sg as iterator in sbc_verify_read
target: Add DIF sense codes in transport_generic_request_failure
target/sbc: Fix sbc_dif_copy_prot addr offset bug
tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs
tcm_qla2xxx: Perform configfs depend/undepend for base_tpg
tcm_qla2xxx: Add NPIV specific enable/disable attribute logic
qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown
qla2xxx: Fix qlt_lport_register base_vha callback race
Linus Torvalds [Sun, 2 Mar 2014 03:30:43 +0000 (21:30 -0600)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dma fixes from Vinod Koul:
"This request brings you two small fixes. First one for fixing
dereference of freed descriptor and second for fixing sdma bindings
for it to work for imx25.
I was planning to send this about 10days ago but then I had to proceed
on my paternity leave and didnt get chance to send this. Now got a
bit of time from dady duties :)"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dma: sdma: Add imx25 compatible
dma: ste_dma40: don't dereference free:d descriptor
Linus Torvalds [Sun, 2 Mar 2014 03:28:38 +0000 (21:28 -0600)]
Merge tag 'pm+acpi-3.14-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These three commits fix a recent intel_pstate regression and two old
bugs that should be fixed in -stable too, one in the ACPI processor
driver and one in the firmare loader.
Specifics:
- One of the recent intel_pstate driver fixes introduced a rounding
error that on some systems causes the frequency to be stuck at the
lowest level forever. Fix from Dirk Brandewie.
- The firmware_class driver's PM notifier doesn't handle the
PM_RESTORE_PREPARE event during hibernation image restore and that
leads to a deadlock on umhelper_sem in __usermodehelper_disable().
Fix from Sebastian Capella.
- acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a
nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up()
among other things. Fix from Lan Tianyu"
* tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Rework processor throttling with work_on_cpu()
PM / hibernate: Fix restore hang in freeze_processes()
intel_pstate: Change busy calculation to use fixed point math.
Ingo Molnar [Sat, 1 Mar 2014 09:13:25 +0000 (10:13 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent build fixes for certain distro environments, from Arnaldo Carvalho de Melo:
* Problem on recent gcc on x86-32 related to strict alias issue for
find_first_bit (Jiri Olsa).
* OpenSuSE: BFD detection problems related to not explicitely listing all
required libraries (Andi Kleen)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Greg Kroah-Hartman [Sat, 1 Mar 2014 01:08:03 +0000 (17:08 -0800)]
Merge tag 'fixes-for-3.14d' of git://git./linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Fourth set of IIO fixes for the 3.14 kernel.
A single line patch fixing a regression that was introduced in 3.13 in the
reworking of the mxs touch screen and ADC drivers to be interrupt rather
than polling driven. It resulted in a stray double reporting of the release
coordinate in the touch screen driver. The bug lay in the adc side
of the driver which left the statemachine in the wrong state.
Russell King [Fri, 28 Feb 2014 22:40:53 +0000 (22:40 +0000)]
MAINTAINERS: add maintainer entry for Armada DRM driver
Add a maintainers entry for the Armada DRM driver.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ivan Vecera [Fri, 28 Feb 2014 13:14:03 +0000 (14:14 +0100)]
bna: fix vlan tag stripping and implement its toggling
The recent commit "
fe1624c bna: RX Filter Enhancements" disables
VLAN tag stripping if the NIC is in promiscuous mode. This causes
__vlan_hwaccel_put_tag() is called when the stripping is disabled.
Because of this VLAN over bna does not work and causes BUGs in conjunction
with openvswitch like this:
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 28 Feb 2014 23:05:10 +0000 (15:05 -0800)]
tg3: Don't check undefined error bits in RXBD
Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes
a customer reported issue of randomly dropping packets on the 5719.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 28 Feb 2014 19:53:33 +0000 (11:53 -0800)]
Merge tag 'dm-3.14-fixes-1' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"A few dm-cache fixes, an invalid ioctl handling fix for dm multipath,
a couple immutable biovec fixups for dm mirror, and a few dm-thin
fixes.
There will likely be additional dm-thin metadata and data resize fixes
to include in 3.14-rc6 next week.
Note to stable-minded folks: Immutable biovecs were introduced in
3.14, so the related fixups for dm mirror are not needed in stable@
kernels"
* tag 'dm-3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix truncation bug when mapping I/O to >2TB fast device
dm thin: allow metadata space larger than supported to go unused
dm mpath: fix stalls when handling invalid ioctls
dm thin: fix the error path for the thin device constructor
dm raid1: fix immutable biovec related BUG when retrying read bio
dm io: fix I/O to multiple destinations
dm thin: avoid metadata commit if a pool's thin devices haven't changed
dm cache: do not add migration to completed list before unhooking bio
dm cache: move hook_info into common portion of per_bio_data structure
Linus Torvalds [Fri, 28 Feb 2014 19:50:32 +0000 (11:50 -0800)]
Merge tag 'sound-3.14-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It's a bad habit to get a higher volume of fixes often lately, but
things happen again.
All commits found here are real bug fixes, and are mostly trivial.
Most of changes in ASoC are the fixes for enum items due to the wrong
API usages, in addition to a few DAPM mutex deadlock and other fixes.
In HD-audio, only fixups for HP laptops. Although diffstat shows
much, the changes are simple: there are just so many different device
entries there"
* tag 'sound-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sta32x: Fix wrong enum for limiter2 release rate
ASoC: da732x: Mark DC offset control registers volatile
ALSA: hda/realtek - Add more entry for enable HP mute led
ALSA: hda - Add a fixup for HP Folio 13 mute LED
ASoC: wm8958-dsp: Fix firmware block loading
ASoC: sta32x: Fix cache sync
ALSA: hda/realtek - Add more entry for enable HP mute led
ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions
Input - arizona-haptics: Fix double lock of dapm_mutex
ASoC: wm8400: Fix the wrong number of enum items
ASoC: isabelle: Fix the wrong number of items in enum ctls
ASoC: ad1980: Fix wrong number of items for capture source
ASoC: wm8994: Fix the wrong number of enum items
ASoC: wm8900: Fix the wrong number of enum items
ASoC: wm8770: Fix wrong number of enum items
ASoC: sta32x: Fix array access overflow
ASoC: dapm: Correct regulator bypass error messages
Linus Torvalds [Fri, 28 Feb 2014 19:49:09 +0000 (11:49 -0800)]
Merge tag 'edac_fixes_for_3.14' of git://git./linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:
"Two fixes below for PCI devices disappearing when a reference count
underflow happens after a couple of insmod/rmmod cycles in succession"
* tag 'edac_fixes_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
i7300_edac: Fix device reference count
i7core_edac: Fix PCI device reference count
Linus Torvalds [Fri, 28 Feb 2014 19:45:03 +0000 (11:45 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Three x86 fixes and one for ARM/ARM64.
In particular, nested virtualization on Intel is broken in 3.13 and
fixed by this pull request"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm, vmx: Really fix lazy FPU on nested guest
kvm: x86: fix emulator buffer overflow (CVE-2014-0049)
arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT
KVM: MMU: drop read-only large sptes when creating lower level sptes
Linus Torvalds [Fri, 28 Feb 2014 19:43:42 +0000 (11:43 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull ARM64 fixes from Catalin Marinas:
- !CONFIG_SMP build fix
- pte bit testing macros conversion fix (int truncates top bits of
long)
- stack unwinding PC calculation fix
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix !CONFIG_SMP kernel build
arm64: mm: Add double logical invert to pte accessors
ARM64: unwind: Fix PC calculation
Linus Torvalds [Fri, 28 Feb 2014 19:42:33 +0000 (11:42 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"Here are a few more powerpc fixes for 3.14.
Most of these are also CC'ed to stable and fix bugs in new
functionality introduced in the last 2 or 3 versions"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/powernv: Fix indirect XSCOM unmangling
powerpc/powernv: Fix opal_xscom_{read,write} prototype
powerpc/powernv: Refactor PHB diag-data dump
powerpc/powernv: Dump PHB diag-data immediately
powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
powerpc/ftrace: bugfix for test_24bit_addr
powerpc/crashdump : Fix page frame number check in copy_oldmem_page
powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
Bing Zhao [Thu, 27 Feb 2014 04:11:22 +0000 (20:11 -0800)]
mwifiex: do not advertise usb autosuspend support
As many Surface Pro I & II users have found out, the mwifiex_usb
doesn't support usb autosuspend, and it has caused some system
stability issues.
Bug 69661 - mwifiex_usb on MS Surface Pro 1 is unstable
Bug 60815 - Interface hangs in mwifiex_usb
Bug 64111 - mwifiex_usb USB8797 crash failed to get signal
information
USB autosuspend get triggered when Surface Pro's AC power is
removed or powertop enables power saving on USB8797 device.
Driver's suspend handler is called here, but resume handler
won't be called until the AC power is put back on or powertop
disables power saving for USB8797.
We need to refactor the suspend/resume handlers to support
usb autosuspend properly. For now let's just remove it.
Cc: <stable@vger.kernel.org> # 3.5+
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Fri, 28 Feb 2014 18:42:54 +0000 (13:42 -0500)]
Merge branch 'for-john' of git://git./linux/kernel/git/jberg/mac80211
John W. Linville [Fri, 28 Feb 2014 18:42:02 +0000 (13:42 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/iwlwifi/iwlwifi-fixes
Catalin Marinas [Fri, 28 Feb 2014 16:12:25 +0000 (16:12 +0000)]
arm64: Fix !CONFIG_SMP kernel build
Commit
fb4a96029c8a (arm64: kernel: fix per-cpu offset restore on
resume) uses per_cpu_offset() unconditionally during CPU wakeup,
however, this is only defined for the SMP case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Dave P Martin <Dave.Martin@arm.com>
Steve Capper [Tue, 25 Feb 2014 11:38:53 +0000 (11:38 +0000)]
arm64: mm: Add double logical invert to pte accessors
Page table entries on ARM64 are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.
For example:
gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.
This patch adds a double logical invert to all the pte_ accessors to
ensure predictable downcasting.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Heinz Mauelshagen [Thu, 27 Feb 2014 21:46:48 +0000 (22:46 +0100)]
dm cache: fix truncation bug when mapping I/O to >2TB fast device
When remapping a block to the cache's fast device that is larger than
2TB we must not truncate the destination sector to 32bits. The 32bit
temporary result of from_cblock() was being overflowed in
remap_to_cache() due to the logical left shift.
Use an intermediate 64bit type to store the 32bit from_cblock() result
to fix the overflow.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Jiri Olsa [Wed, 26 Feb 2014 17:14:26 +0000 (18:14 +0100)]
perf tools: Fix strict alias issue for find_first_bit
When compiling perf tool code with gcc 4.4.7 I'm getting
following error:
CC util/session.o
cc1: warnings being treated as errors
util/session.c: In function ‘perf_session_deliver_event’:
tools/perf/util/include/linux/bitops.h:109: error: dereferencing pointer ‘p’ does break strict-aliasing rules
tools/perf/util/include/linux/bitops.h:101: error: dereferencing pointer ‘p’ does break strict-aliasing rules
util/session.c:697: note: initialized from here
tools/perf/util/include/linux/bitops.h:101: note: initialized from here
make[1]: *** [util/session.o] Error 1
make: *** [util/session.o] Error 2
The aliased types here are u64 and unsigned long pointers, which is safe
for the find_first_bit processing.
This error shows up for me only for gcc 4.4 on 32bit x86, even for
-Wstrict-aliasing=3, while newer gcc are quiet and scream here for
-Wstrict-aliasing={2,1}. Looks like newer gcc changed the rules for
strict alias warnings.
The gcc documentation offers workaround for valid aliasing by using
__may_alias__ attribute:
http://gcc.gnu.org/onlinedocs/gcc-4.4.0/gcc/Type-Attributes.html
Using this workaround for the find_first_bit function.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393434867-20271-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Benjamin Herrenschmidt [Fri, 28 Feb 2014 05:20:38 +0000 (16:20 +1100)]
powerpc/powernv: Fix indirect XSCOM unmangling
We need to unmangle the full address, not just the register
number, and we also need to support the real indirect bit
being set for in-kernel uses.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]
Benjamin Herrenschmidt [Fri, 28 Feb 2014 05:20:29 +0000 (16:20 +1100)]
powerpc/powernv: Fix opal_xscom_{read,write} prototype
The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]
Gavin Shan [Tue, 25 Feb 2014 07:28:38 +0000 (15:28 +0800)]
powerpc/powernv: Refactor PHB diag-data dump
As Ben suggested, the patch prints PHB diag-data with multiple
fields in one line and omits the line if the fields of that
line are all zero.
With the patch applied, the PHB3 diag-data dump looks like:
PHB3 PHB#3 Diag-data (Version: 1)
brdgCtl:
00000002
RootSts:
0000000f 00400000 b0830008 00100147 00002000
nFir:
0000000000000000 0030006e00000000 0000000000000000
PhbSts:
0000001c00000000 0000000000000000
Lem:
0000000000100000 42498e327f502eae 0000000000000000
InAErr:
8000000000000000 8000000000000000 0402030000000000 0000000000000000
PE[ 8] A/B:
8480002b00000000 8000000000000000
[ The current diag data is so big that it overflows the printk
buffer pretty quickly in cases when we get a handful of errors
at once which can happen. --BenH
]
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
projects / openwrt / staging / blogic.git / log