Inbar Karmy [Mon, 14 Aug 2017 13:12:16 +0000 (16:12 +0300)]
net/mlx5e: Don't override user RSS upon set channels
Currently, increasing the number of combined channels is changing
the RSS spread to use the new created channels.
Prevent the RSS spread change in case the user explicitly declare it,
to avoid overriding user configuration.
Tested:
when RSS default:
# ethtool -L ens8 combined 4
RSS spread will change and point to 4 channels.
# ethtool -X ens8 equal 4
# ethtool -L ens8 combined 6
RSS will not change after increasing the number of the channels.
Fixes: 8bf368620486 ('ethtool: ensure channel counts are within bounds during SCHANNELS')
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eran Ben Elisha [Wed, 16 Aug 2017 11:37:11 +0000 (14:37 +0300)]
net/mlx5e: Fix dangling page pointer on DMA mapping error
Function mlx5e_dealloc_rx_wqe is using page pointer value as an
indication to valid DMA mapping. In case that the mapping failed, we
released the page but kept the dangling pointer. Store the page pointer
only after the DMA mapping passed to avoid invalid page DMA unmap.
Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Wed, 9 Aug 2017 15:03:40 +0000 (10:03 -0500)]
net/mlx5: Remove the flag MLX5_INTERFACE_STATE_SHUTDOWN
MLX5_INTERFACE_STATE_SHUTDOWN is not used in the code.
Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Tue, 8 Aug 2017 18:17:00 +0000 (13:17 -0500)]
net/mlx5: Skip mlx5_unload_one if mlx5_load_one fails
There is an issue where the firmware fails during mlx5_load_one,
the health_care timer detects the issue and schedules a health_care call.
Then the mlx5_load_one detects the issue, cleans up and quits. Then
the health_care starts and calls mlx5_unload_one to clean up the resources
that no longer exist and causes kernel panic.
The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set
after mlx5_load_one fails. The solution is removing the bit
MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the
bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN
is redundant and we can use MLX5_INTERFACE_STATE_UP instead.
Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Noa Osherovich [Sun, 30 Jul 2017 10:55:48 +0000 (13:55 +0300)]
net/mlx5: Fix arm SRQ command for ISSI version 0
Support for ISSI version 0 was recently broken as the arm_srq_cmd
command, which is used only for ISSI version 0, was given the opcode
for ISSI version 1 instead of ISSI version 0.
Change arm_srq_cmd to use the correct command opcode for ISSI version
0.
Fixes: af1ba291c5e4 ('{net, IB}/mlx5: Refactor internal SRQ API')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Mon, 10 Jul 2017 19:00:23 +0000 (14:00 -0500)]
net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap.
Current code doesn't report DCB_CAP_DCBX_HOST capability when query
through getcap. User space lldptool expects capability to have HOST mode
set when it wants to configure DCBX CEE mode. In absence of HOST mode
capability, lldptool fails to switch to CEE mode.
This fix returns DCB_CAP_DCBX_HOST capability when port's DCBX
controlled mode is under software control.
Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Thu, 13 Jul 2017 18:45:11 +0000 (13:45 -0500)]
net/mlx5e: Check for qos capability in dcbnl_initialize
qos capability is the master capability bit that determines
if the DCBX is supported for the PCI function. If this bit is off,
driver cannot run any dcbx code.
Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Quan Nguyen [Tue, 29 Aug 2017 22:43:12 +0000 (15:43 -0700)]
drivers: net: xgene: Correct probe sequence handling
The phy is connected at early stage of probe but not properly
disconnected if error occurs. This patch fixes the issue.
Also changing the return type of xgene_enet_check_phy_handle(),
since this function always returns success.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 29 Aug 2017 19:15:16 +0000 (22:15 +0300)]
nfp: double free on error in probe
Both the nfp_net_pf_app_start() and the nfp_net_pci_probe() functions
call nfp_net_pf_app_stop_ctrl(pf) so there is a double free. The free
should be done from the probe function because it's allocated there so
I have removed the call from nfp_net_pf_app_start().
Fixes: 02082701b974 ("nfp: create control vNICs and wire up rx/tx")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 29 Aug 2017 22:11:44 +0000 (15:11 -0700)]
Merge branch 'aquantia-fixes'
Pavel Belous says:
====================
net:ethernet:aquantia: Atlantic driver Update 2017-08-23
This series contains updates for aQuantia Atlantic driver.
It has bugfixes and some improvements.
Changes in v2:
- "MCP state change" fix removed (will be sent as
a separate fix after further investigation.)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:13 +0000 (21:52 +0300)]
net:ethernet:aquantia: Show info message if bad firmware version detected.
We should inform user about wrong firmware version
by printing message in dmesg.
Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Mon, 28 Aug 2017 18:52:12 +0000 (21:52 +0300)]
net:ethernet:aquantia: Fix for multicast filter handling.
Since the HW supports up to 32 multicast filters we should
track count of multicast filters to avoid overflow.
If we attempt to add >32 multicast filter - just set NETIF_ALLMULTI flag
instead.
Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Igor Russkikh <Igor.Russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:11 +0000 (21:52 +0300)]
net:ethernet:aquantia: Fix for incorrect speed index.
The driver choose the optimal interrupt throttling settings depends
of current link speed.
Due this bug link_status field from aq_hw is never updated and as result
always used same interrupt throttling values.
Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:10 +0000 (21:52 +0300)]
net:ethernet:aquantia: Workaround for HW checksum bug.
The hardware has the HW Checksum Offload bug when small
TCP patckets (with length <= 60 bytes) has wrong "checksum valid" bit.
The solution is - ignore checksum valid bit for small packets
(with length <= 60 bytes) and mark this as CHECKSUM_NONE to allow
network stack recalculate checksum itself.
Fixes: ccf9a5ed14be ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:09 +0000 (21:52 +0300)]
net:ethernet:aquantia: Fix for number of RSS queues.
The number of RSS queues should be not more than numbers of CPU.
Its does not make sense to increase perfomance, and also cause problems on
some motherboards.
Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:08 +0000 (21:52 +0300)]
net:ethernet:aquantia: Extra spinlocks removed.
This patch removes datapath spinlocks which does not perform any
useful work.
Fixes: 6e70637f9f1e ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Mon, 28 Aug 2017 18:29:41 +0000 (14:29 -0400)]
packet: Don't write vnet header beyond end of buffer
... which may happen with certain values of tp_reserve and maclen.
Fixes: 58d19b19cd99 ("packet: vnet_hdr support for tpacket_rcv")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Mon, 28 Aug 2017 15:57:02 +0000 (17:57 +0200)]
tipc: permit bond slave as bearer
For a bond slave device as a tipc bearer, the dev represents the bond
interface and orig_dev represents the slave in tipc_l2_rcv_msg().
Since we decode the tipc_ptr from bonding device (dev), we fail to
find the bearer and thus tipc links are not established.
In this commit, we register the tipc protocol callback per device and
look for tipc bearer from both the devices.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 28 Aug 2017 02:45:01 +0000 (10:45 +0800)]
ipv6: do not set sk_destruct in IPV6_ADDRFORM sockopt
ChunYu found a kernel warn_on during syzkaller fuzzing:
[40226.038539] WARNING: CPU: 5 PID: 23720 at net/ipv4/af_inet.c:152 inet_sock_destruct+0x78d/0x9a0
[40226.144849] Call Trace:
[40226.147590] <IRQ>
[40226.149859] dump_stack+0xe2/0x186
[40226.176546] __warn+0x1a4/0x1e0
[40226.180066] warn_slowpath_null+0x31/0x40
[40226.184555] inet_sock_destruct+0x78d/0x9a0
[40226.246355] __sk_destruct+0xfa/0x8c0
[40226.290612] rcu_process_callbacks+0xaa0/0x18a0
[40226.336816] __do_softirq+0x241/0x75e
[40226.367758] irq_exit+0x1f6/0x220
[40226.371458] smp_apic_timer_interrupt+0x7b/0xa0
[40226.376507] apic_timer_interrupt+0x93/0xa0
The warn_on happned when sk->sk_rmem_alloc wasn't 0 in inet_sock_destruct.
As after commit
f970bd9e3a06 ("udp: implement memory accounting helpers"),
udp has changed to use udp_destruct_sock as sk_destruct where it would
udp_rmem_release all rmem.
But IPV6_ADDRFORM sockopt sets sk_destruct with inet_sock_destruct after
changing family to PF_INET. If rmem is not 0 at that time, and there is
no place to release rmem before calling inet_sock_destruct, the warn_on
will be triggered.
This patch is to fix it by not setting sk_destruct in IPV6_ADDRFORM sockopt
any more. As IPV6_ADDRFORM sockopt only works for tcp and udp. TCP sock has
already set it's sk_destruct with inet_sock_destruct and UDP has set with
udp_destruct_sock since they're created.
Fixes: f970bd9e3a06 ("udp: implement memory accounting helpers")
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 29 Aug 2017 16:37:06 +0000 (09:37 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2017-08-29
1) Fix dst_entry refcount imbalance when using socket policies.
From Lorenzo Colitti.
2) Fix locking when adding the ESP trailers.
3) Fix tailroom calculation for the ESP trailer by using
skb_tailroom instead of skb_availroom.
4) Fix some info leaks in xfrm_user.
From Mathias Krause.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 29 Aug 2017 00:10:51 +0000 (17:10 -0700)]
net: dsa: Don't dereference dst->cpu_dp->netdev
If we do not have a master network device attached dst->cpu_dp will be
NULL and accessing cpu_dp->netdev will create a trace similar to the one
below. The correct check is on dst->cpu_dp period.
[ 1.004650] DSA: switch 0 0 parsed
[ 1.008078] Unable to handle kernel NULL pointer dereference at
virtual address
00000010
[ 1.016195] pgd =
c0003000
[ 1.018918] [
00000010] *pgd=
80000000004003, *pmd=
00000000
[ 1.024349] Internal error: Oops: 206 [#1] SMP ARM
[ 1.029157] Modules linked in:
[ 1.032228] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.13.0-rc6-00071-g45b45afab9bd-dirty #7
[ 1.040772] Hardware name: Broadcom STB (Flattened Device Tree)
[ 1.046704] task:
ee08f840 task.stack:
ee090000
[ 1.051258] PC is at dsa_register_switch+0x5e0/0x9dc
[ 1.056234] LR is at dsa_register_switch+0x5d0/0x9dc
[ 1.061211] pc : [<
c08fb28c>] lr : [<
c08fb27c>] psr:
60000213
[ 1.067491] sp :
ee091d88 ip :
00000000 fp :
0000000c
[ 1.072728] r10:
00000000 r9 :
00000001 r8 :
ee208010
[ 1.077965] r7 :
ee2b57b0 r6 :
ee2b5780 r5 :
00000000 r4 :
ee208e0c
[ 1.084506] r3 :
00000000 r2 :
00040d00 r1 :
2d1b2000 r0 :
00000016
[ 1.091050] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM
Segment user
[ 1.098199] Control:
32c5387d Table:
00003000 DAC:
fffffffd
[ 1.103957] Process swapper/0 (pid: 1, stack limit = 0xee090210)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6d3c8c0dd88a ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Sun, 27 Aug 2017 04:13:48 +0000 (21:13 -0700)]
bridge: check for null fdb->dst before notifying switchdev drivers
current switchdev drivers dont seem to support offloading fdb
entries pointing to the bridge device which have fdb->dst
not set to any port. This patch adds a NULL fdb->dst check in
the switchdev notifier code.
This patch fixes the below NULL ptr dereference:
$bridge fdb add 00:02:00:00:00:33 dev br0 self
[ 69.953374] BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
[ 69.954044] IP: br_switchdev_fdb_notify+0x29/0x80
[ 69.954044] PGD
66527067
[ 69.954044] P4D
66527067
[ 69.954044] PUD
7899c067
[ 69.954044] PMD 0
[ 69.954044]
[ 69.954044] Oops: 0000 [#1] SMP
[ 69.954044] Modules linked in:
[ 69.954044] CPU: 1 PID: 3074 Comm: bridge Not tainted 4.13.0-rc6+ #1
[ 69.954044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS
rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org
04/01/2014
[ 69.954044] task:
ffff88007b827140 task.stack:
ffffc90001564000
[ 69.954044] RIP: 0010:br_switchdev_fdb_notify+0x29/0x80
[ 69.954044] RSP: 0018:
ffffc90001567918 EFLAGS:
00010246
[ 69.954044] RAX:
0000000000000000 RBX:
ffff8800795e0880 RCX:
00000000000000c0
[ 69.954044] RDX:
ffffc90001567920 RSI:
000000000000001c RDI:
ffff8800795d0600
[ 69.954044] RBP:
ffffc90001567938 R08:
ffff8800795d0600 R09:
0000000000000000
[ 69.954044] R10:
ffffc90001567a88 R11:
ffff88007b849400 R12:
ffff8800795e0880
[ 69.954044] R13:
ffff8800795d0600 R14:
ffffffff81ef8880 R15:
000000000000001c
[ 69.954044] FS:
00007f93d3085700(0000) GS:
ffff88007fd00000(0000)
knlGS:
0000000000000000
[ 69.954044] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 69.954044] CR2:
0000000000000008 CR3:
0000000066551000 CR4:
00000000000006e0
[ 69.954044] Call Trace:
[ 69.954044] fdb_notify+0x3f/0xf0
[ 69.954044] __br_fdb_add.isra.12+0x1a7/0x370
[ 69.954044] br_fdb_add+0x178/0x280
[ 69.954044] rtnl_fdb_add+0x10a/0x200
[ 69.954044] rtnetlink_rcv_msg+0x1b4/0x240
[ 69.954044] ? skb_free_head+0x21/0x40
[ 69.954044] ? rtnl_calcit.isra.18+0xf0/0xf0
[ 69.954044] netlink_rcv_skb+0xed/0x120
[ 69.954044] rtnetlink_rcv+0x15/0x20
[ 69.954044] netlink_unicast+0x180/0x200
[ 69.954044] netlink_sendmsg+0x291/0x370
[ 69.954044] ___sys_sendmsg+0x180/0x2e0
[ 69.954044] ? filemap_map_pages+0x2db/0x370
[ 69.954044] ? do_wp_page+0x11d/0x420
[ 69.954044] ? __handle_mm_fault+0x794/0xd80
[ 69.954044] ? vma_link+0xcb/0xd0
[ 69.954044] __sys_sendmsg+0x4c/0x90
[ 69.954044] SyS_sendmsg+0x12/0x20
[ 69.954044] do_syscall_64+0x63/0xe0
[ 69.954044] entry_SYSCALL64_slow_path+0x25/0x25
[ 69.954044] RIP: 0033:0x7f93d2bad690
[ 69.954044] RSP: 002b:
00007ffc7217a638 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 69.954044] RAX:
ffffffffffffffda RBX:
00007ffc72182eac RCX:
00007f93d2bad690
[ 69.954044] RDX:
0000000000000000 RSI:
00007ffc7217a670 RDI:
0000000000000003
[ 69.954044] RBP:
0000000059a1f7f8 R08:
0000000000000006 R09:
000000000000000a
[ 69.954044] R10:
00007ffc7217a400 R11:
0000000000000246 R12:
00007ffc7217a670
[ 69.954044] R13:
00007ffc72182a98 R14:
00000000006114c0 R15:
00007ffc72182aa0
[ 69.954044] Code: 1f 00 66 66 66 66 90 55 48 89 e5 48 83 ec 20 f6 47
20 04 74 0a 83 fe 1c 74 09 83 fe 1d 74 2c c9 66 90 c3 48 8b 47 10 48 8d
55 e8 <48> 8b 70 08 0f b7 47 1e 48 83 c7 18 48 89 7d f0 bf 03 00 00 00
[ 69.954044] RIP: br_switchdev_fdb_notify+0x29/0x80 RSP:
ffffc90001567918
[ 69.954044] CR2:
0000000000000008
[ 69.954044] ---[ end trace
03e9eec4a82c238b ]---
Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 26 Aug 2017 12:10:10 +0000 (20:10 +0800)]
ipv6: set dst.obsolete when a cached route has expired
Now it doesn't check for the cached route expiration in ipv6's
dst_ops->check(), because it trusts dst_gc that would clean the
cached route up when it's expired.
The problem is in dst_gc, it would clean the cached route only
when it's refcount is 1. If some other module (like xfrm) keeps
holding it and the module only release it when dst_ops->check()
fails.
But without checking for the cached route expiration, .check()
may always return true. Meanwhile, without releasing the cached
route, dst_gc couldn't del it. It will cause this cached route
never to expire.
This patch is to set dst.obsolete with DST_OBSOLETE_KILL in .gc
when it's expired, and check obsolete != DST_OBSOLETE_FORCE_CHK
in .check.
Note that this is even needed when ipv6 dst_gc timer is removed
one day. It would set dst.obsolete in .redirect and .update_pmtu
instead, and check for cached route expiration when getting it,
just like what ipv4 route does.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Fri, 25 Aug 2017 22:03:10 +0000 (15:03 -0700)]
ipv6: fix sparse warning on rt6i_node
Commit
c5cff8561d2d adds rcu grace period before freeing fib6_node. This
generates a new sparse warning on rt->rt6i_node related code:
net/ipv6/route.c:1394:30: error: incompatible types in comparison
expression (different address spaces)
./include/net/ip6_fib.h:187:14: error: incompatible types in comparison
expression (different address spaces)
This commit adds "__rcu" tag for rt6i_node and makes sure corresponding
rcu API is used for it.
After this fix, sparse no longer generates the above warning.
Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 25 Aug 2017 20:48:48 +0000 (22:48 +0200)]
cxgb4: Fix stack out-of-bounds read due to wrong size to t4_record_mbox()
Passing commands for logging to t4_record_mbox() with size
MBOX_LEN, when the actual command size is actually smaller,
causes out-of-bounds stack accesses in t4_record_mbox() while
copying command words here:
for (i = 0; i < size / 8; i++)
entry->cmd[i] = be64_to_cpu(cmd[i]);
Up to 48 bytes from the stack are then leaked to debugfs.
This happens whenever we send (and log) commands described by
structs fw_sched_cmd (32 bytes leaked), fw_vi_rxmode_cmd (48),
fw_hello_cmd (48), fw_bye_cmd (48), fw_initialize_cmd (48),
fw_reset_cmd (48), fw_pfvf_cmd (32), fw_eq_eth_cmd (16),
fw_eq_ctrl_cmd (32), fw_eq_ofld_cmd (32), fw_acl_mac_cmd(16),
fw_rss_glb_config_cmd(32), fw_rss_vi_config_cmd(32),
fw_devlog_cmd(32), fw_vi_enable_cmd(48), fw_port_cmd(32),
fw_sched_cmd(32), fw_devlog_cmd(32).
The cxgb4vf driver got this right instead.
When we call t4_record_mbox() to log a command reply, a MBOX_LEN
size can be used though, as get_mbox_rpl() will fill cmd_rpl up
completely.
Fixes: 7f080c3f2ff0 ("cxgb4: Add support to enable logging of firmware mailbox commands")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Ripard [Fri, 25 Aug 2017 19:12:17 +0000 (21:12 +0200)]
net: stmmac: sun8i: Remove the compatibles
Since the bindings have been controversial, and we follow the DT stable ABI
rule, we shouldn't let a driver with a DT binding that might change slip
through in a stable release.
Remove the compatibles to make sure the driver will not probe and no-one
will start using the binding currently implemented. This commit will
obviously need to be reverted in due time.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Aug 2017 22:20:25 +0000 (15:20 -0700)]
Merge branch 'nfp-flow-dissector-layer'
Pieter Jansen van Vuuren says:
====================
nfp: fix layer calculation and flow dissector use
Previously when calculating the supported key layers MPLS, IPv4/6
TTL and TOS were not considered. Formerly flow dissectors were referenced
without first checking that they are in use and correctly populated by TC.
Additionally this patch set fixes the incorrect use of mask field for vlan
matching.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Fri, 25 Aug 2017 17:31:03 +0000 (19:31 +0200)]
nfp: remove incorrect mask check for vlan matching
Previously the vlan tci field was incorrectly exact matched. This patch
fixes this by using the flow dissector to populate the vlan tci field.
Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Fri, 25 Aug 2017 17:31:02 +0000 (19:31 +0200)]
nfp: fix supported key layers calculation
Previously when calculating the supported key layers MPLS, IPv4/6
TTL and TOS were not considered. This patch checks that the TTL and
TOS fields are masked out before offloading. Additionally this patch
checks that MPLS packets are correctly handled, by not offloading them.
Fixes: af9d842c1354 ("nfp: extend flower add flow offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Fri, 25 Aug 2017 17:31:01 +0000 (19:31 +0200)]
nfp: fix unchecked flow dissector use
Previously flow dissectors were referenced without first checking that
they are in use and correctly populated by TC. This patch fixes this by
checking each flow dissector key before referencing them.
Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Aug 2017 18:34:59 +0000 (11:34 -0700)]
Merge branch 'l2tp-tunnel-refs'
Guillaume Nault says:
====================
l2tp: fix some l2tp_tunnel_find() issues in l2tp_netlink
Since l2tp_tunnel_find() doesn't take a reference on the tunnel it
returns, its users are almost guaranteed to be racy.
This series defines l2tp_tunnel_get() which can be used as a safe
replacement, and converts some of l2tp_tunnel_find() users in the
l2tp_netlink module.
Other users often combine this issue with other more or less subtle
races. They will be fixed incrementally in followup series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 25 Aug 2017 14:51:46 +0000 (16:51 +0200)]
l2tp: hold tunnel used while creating sessions with netlink
Use l2tp_tunnel_get() to retrieve tunnel, so that it can't go away on
us. Otherwise l2tp_tunnel_destruct() might release the last reference
count concurrently, thus freeing the tunnel while we're using it.
Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 25 Aug 2017 14:51:43 +0000 (16:51 +0200)]
l2tp: hold tunnel while handling genl TUNNEL_GET commands
Use l2tp_tunnel_get() instead of l2tp_tunnel_find() so that we get
a reference on the tunnel, preventing l2tp_tunnel_destruct() from
freeing it from under us.
Also move l2tp_tunnel_get() below nlmsg_new() so that we only take
the reference when needed.
Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 25 Aug 2017 14:51:42 +0000 (16:51 +0200)]
l2tp: hold tunnel while handling genl tunnel updates
We need to make sure the tunnel is not going to be destroyed by
l2tp_tunnel_destruct() concurrently.
Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 25 Aug 2017 14:51:42 +0000 (16:51 +0200)]
l2tp: hold tunnel while processing genl delete command
l2tp_nl_cmd_tunnel_delete() needs to take a reference on the tunnel, to
prevent it from being concurrently freed by l2tp_tunnel_destruct().
Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 25 Aug 2017 14:51:40 +0000 (16:51 +0200)]
l2tp: hold tunnel while looking up sessions in l2tp_netlink
l2tp_tunnel_find() doesn't take a reference on the returned tunnel.
Therefore, it's unsafe to use it because the returned tunnel can go
away on us anytime.
Fix this by defining l2tp_tunnel_get(), which works like
l2tp_tunnel_find(), but takes a reference on the returned tunnel.
Caller then has to drop this reference using l2tp_tunnel_dec_refcount().
As l2tp_tunnel_dec_refcount() needs to be moved to l2tp_core.h, let's
simplify the patch and not move the L2TP_REFCNT_DEBUG part. This code
has been broken (not even compiling) in May 2012 by
commit
a4ca44fa578c ("net: l2tp: Standardize logging styles")
and fixed more than two years later by
commit
29abe2fda54f ("l2tp: fix missing line continuation"). So it
doesn't appear to be used by anyone.
Same thing for l2tp_tunnel_free(); instead of moving it to l2tp_core.h,
let's just simplify things and call kfree_rcu() directly in
l2tp_tunnel_dec_refcount(). Extra assertions and debugging code
provided by l2tp_tunnel_free() didn't help catching any of the
reference counting and socket handling issues found while working on
this series.
Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 25 Aug 2017 14:22:17 +0000 (16:22 +0200)]
l2tp: initialise session's refcount before making it reachable
Sessions must be fully initialised before calling
l2tp_session_add_to_tunnel(). Otherwise, there's a short time frame
where partially initialised sessions can be accessed by external users.
Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Fri, 25 Aug 2017 14:14:17 +0000 (16:14 +0200)]
net: mvpp2: fix the mac address used when using PPv2.2
The mac address is only retrieved from h/w when using PPv2.1. Otherwise
the variable holding it is still checked and used if it contains a valid
value. As the variable isn't initialized to an invalid mac address
value, we end up with random mac addresses which can be the same for all
the ports handled by this PPv2 driver.
Fixes this by initializing the h/w mac address variable to {0}, which is
an invalid mac address value. This way the random assignation fallback
is called and all ports end up with their own addresses.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Fixes: 2697582144dd ("net: mvpp2: handle misc PPv2.1/PPv2.2 differences")
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Morgado [Fri, 25 Aug 2017 13:39:16 +0000 (15:39 +0200)]
cdc_ncm: flag the u-blox TOBY-L4 as wwan
The u-blox TOBY-L4 is a LTE Advanced (Cat 6) module with HSPA+ and 2G
fallback.
Unlike the TOBY-L2, this module has one single USB layout and exposes
several TTYs for control and a NCM interface for data. Connecting this
module may be done just by activating the desired PDP context with
'AT+CGACT=1,<cid>' and then running DHCP on the NCM interface.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Fri, 25 Aug 2017 13:04:32 +0000 (15:04 +0200)]
net: missing call of trace_napi_poll in busy_poll_stop
Noticed that busy_poll_stop() also invoke the drivers napi->poll()
function pointer, but didn't have an associated call to trace_napi_poll()
like all other call sites.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mathias Krause [Sat, 26 Aug 2017 15:09:00 +0000 (17:09 +0200)]
xfrm_user: fix info leak in build_aevent()
The memory reserved to dump the ID of the xfrm state includes a padding
byte in struct xfrm_usersa_id added by the compiler for alignment. To
prevent the heap info leak, memset(0) the sa_id before filling it.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Fixes: d51d081d6504 ("[IPSEC]: Sync series - user")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Mathias Krause [Sat, 26 Aug 2017 15:08:59 +0000 (17:08 +0200)]
xfrm_user: fix info leak in build_expire()
The memory reserved to dump the expired xfrm state includes padding
bytes in struct xfrm_user_expire added by the compiler for alignment. To
prevent the heap info leak, memset(0) the remainder of the struct.
Initializing the whole structure isn't needed as copy_to_user_state()
already takes care of clearing the padding bytes within the 'state'
member.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Mathias Krause [Sat, 26 Aug 2017 15:08:58 +0000 (17:08 +0200)]
xfrm_user: fix info leak in xfrm_notify_sa()
The memory reserved to dump the ID of the xfrm state includes a padding
byte in struct xfrm_usersa_id added by the compiler for alignment. To
prevent the heap info leak, memset(0) the whole struct before filling
it.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: 0603eac0d6b7 ("[IPSEC]: Add XFRMA_SA/XFRMA_POLICY for delete notification")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Mathias Krause [Sat, 26 Aug 2017 15:08:57 +0000 (17:08 +0200)]
xfrm_user: fix info leak in copy_user_offload()
The memory reserved to dump the xfrm offload state includes padding
bytes of struct xfrm_user_offload added by the compiler for alignment.
Add an explicit memset(0) before filling the buffer to avoid the heap
info leak.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
David S. Miller [Sat, 26 Aug 2017 03:11:53 +0000 (20:11 -0700)]
Merge tag 'wireless-drivers-for-davem-2017-08-25' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.13
Only one iwlwifi patch this time.
iwlwifi
* fix multiple times reported lockdep warning found by new locking
annotation introduced in v4.13-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 25 Aug 2017 12:31:01 +0000 (14:31 +0200)]
udp6: set rx_dst_cookie on rx_dst updates
Currently, in the udp6 code, the dst cookie is not initialized/updated
concurrently with the RX dst used by early demux.
As a result, the dst_check() in the early_demux path always fails,
the rx dst cache is always invalidated, and we can't really
leverage significant gain from the demux lookup.
Fix it adding udp6 specific variant of sk_rx_dst_set() and use it
to set the dst cookie when the dst entry is really changed.
The issue is there since the introduction of early demux for ipv6.
Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe Jaillet [Fri, 25 Aug 2017 05:35:51 +0000 (07:35 +0200)]
net: sxgbe: check memory allocation failure
Check memory allocation failure and return -ENOMEM in such a case, as
already done few lines below for another memory allocation.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 26 Aug 2017 02:13:28 +0000 (19:13 -0700)]
Merge branch 'r8169-Be-drop-monitor-friendly'
Florian Fainelli says:
====================
r8169: Be drop monitor friendly
First patch may be questionable but no other driver appears to be
doing that and while it is defendable to account for left packets as
dropped during TX clean, this appears misleading. I picked Stanislaw
changes which brings us back to 2010, but this was present from
pre-git days as well.
Second patch fixes the two missing calls to dev_consume_skb_any().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 25 Aug 2017 01:34:44 +0000 (18:34 -0700)]
r8169: Be drop monitor friendly
rtl_tx() is the TX reclamation process whereas rtl8169_tx_clear_range() does
the TX ring cleaning during shutdown, both of these functions should call
dev_consume_skb_any() to be drop monitor friendly.
Fixes: cac4b22f3d6a ("r8169: do not account fragments as packets")
Fixes: eb781397904e ("r8169: Do not use dev_kfree_skb in xmit path")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 25 Aug 2017 01:34:43 +0000 (18:34 -0700)]
r8169: Do not increment tx_dropped in TX ring cleaning
rtl8169_tx_clear_range() is responsible for cleaning up the TX ring
during interface shutdown, incrementing tx_dropped for every SKB that we
left at the time in the ring is misleading.
Fixes: cac4b22f3d6a ("r8169: do not account fragments as packets")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Fri, 25 Aug 2017 11:10:12 +0000 (13:10 +0200)]
tcp: fix refcnt leak with ebpf congestion control
There are a few bugs around refcnt handling in the new BPF congestion
control setsockopt:
- The new ca is assigned to icsk->icsk_ca_ops even in the case where we
cannot get a reference on it. This would lead to a use after free,
since that ca is going away soon.
- Changing the congestion control case doesn't release the refcnt on
the previous ca.
- In the reinit case, we first leak a reference on the old ca, then we
call tcp_reinit_congestion_control on the ca that we have just
assigned, leading to deinitializing the wrong ca (->release of the
new ca on the old ca's data) and releasing the refcount on the ca
that we actually want to use.
This is visible by building (for example) BIC as a module and setting
net.ipv4.tcp_congestion_control=bic, and using tcp_cong_kern.c from
samples/bpf.
This patch fixes the refcount issues, and moves reinit back into tcp
core to avoid passing a ca pointer back to BPF.
Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Fri, 25 Aug 2017 07:05:42 +0000 (09:05 +0200)]
ipv6: Fix may be used uninitialized warning in rt6_check
rt_cookie might be used uninitialized, fix this by
initializing it.
Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Fri, 25 Aug 2017 05:34:35 +0000 (07:34 +0200)]
esp: Fix skb tailroom calculation
We use skb_availroom to calculate the skb tailroom for the
ESP trailer. skb_availroom calculates the tailroom and
subtracts this value by reserved_tailroom. However
reserved_tailroom is a union with the skb mark. This means
that we subtract the tailroom by the skb mark if set.
Fix this by using skb_tailroom instead.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert [Fri, 25 Aug 2017 05:16:07 +0000 (07:16 +0200)]
esp: Fix locking on page fragment allocation
We allocate the page fragment for the ESP trailer inside
a spinlock, but consume it outside of the lock. This
is racy as some other cou could get the same page fragment
then. Fix this by consuming the page fragment inside the
lock too.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
stephen hemminger [Thu, 24 Aug 2017 23:49:16 +0000 (16:49 -0700)]
netvsc: fix deadlock betwen link status and removal
There is a deadlock possible when canceling the link status
delayed work queue. The removal process is run with RTNL held,
and the link status callback is acquring RTNL.
Resolve the issue by using trylock and rescheduling.
If cancel is in process, that block it from happening.
Fixes: 122a5f6410f4 ("staging: hv: use delayed_work for netvsc_send_garp()")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 25 Aug 2017 04:54:35 +0000 (21:54 -0700)]
Merge branch 'tipc-buffer-reassignment-fixes'
Parthasarathy Bhuvaragan says:
====================
tipc: buffer reassignment fixes
This series contains fixes for buffer reassignments and a context imbalance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Thu, 24 Aug 2017 14:31:24 +0000 (16:31 +0200)]
tipc: context imbalance at node read unlock
If we fail to find a valid bearer in tipc_node_get_linkname(),
node_read_unlock() is called without holding the node read lock.
This commit fixes this error.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Thu, 24 Aug 2017 14:31:23 +0000 (16:31 +0200)]
tipc: reassign pointers after skb reallocation / linearization
In tipc_msg_reverse(), we assign skb attributes to local pointers
in stack at startup. This is followed by skb_linearize() and for
cloned buffers we perform skb relocation using pskb_expand_head().
Both these methods may update the skb attributes and thus making
the pointers incorrect.
In this commit, we fix this error by ensuring that the pointers
are re-assigned after any of these skb operations.
Fixes: 29042e19f2c60 ("tipc: let function tipc_msg_reverse() expand header
when needed")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Thu, 24 Aug 2017 14:31:22 +0000 (16:31 +0200)]
tipc: perform skb_linearize() before parsing the inner header
In tipc_rcv(), we linearize only the header and usually the packets
are consumed as the nodes permit direct reception. However, if the
skb contains tunnelled message due to fail over or synchronization
we parse it in tipc_node_check_state() without performing
linearization. This will cause link disturbances if the skb was
non linear.
In this commit, we perform linearization for the above messages.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 25 Aug 2017 04:12:28 +0000 (21:12 -0700)]
net_sched: fix a refcount_t issue with noop_qdisc
syzkaller reported a refcount_t warning [1]
Issue here is that noop_qdisc refcnt was never really considered as
a true refcount, since qdisc_destroy() found TCQ_F_BUILTIN set :
if (qdisc->flags & TCQ_F_BUILTIN ||
!refcount_dec_and_test(&qdisc->refcnt)))
return;
Meaning that all atomic_inc() we did on noop_qdisc.refcnt were not
really needed, but harmless until refcount_t came.
To fix this problem, we simply need to not increment noop_qdisc.refcnt,
since we never decrement it.
[1]
refcount_t: increment on 0; use-after-free.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 21754 at lib/refcount.c:152 refcount_inc+0x47/0x50 lib/refcount.c:152
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 21754 Comm: syz-executor7 Not tainted 4.13.0-rc6+ #20
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
panic+0x1e4/0x417 kernel/panic.c:180
__warn+0x1c4/0x1d9 kernel/panic.c:541
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846
RIP: 0010:refcount_inc+0x47/0x50 lib/refcount.c:152
RSP: 0018:
ffff8801c43477a0 EFLAGS:
00010282
RAX:
000000000000002b RBX:
ffffffff86093c14 RCX:
0000000000000000
RDX:
000000000000002b RSI:
ffffffff8159314e RDI:
ffffed0038868ee8
RBP:
ffff8801c43477a8 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffffffff86093ac0
R13:
0000000000000001 R14:
ffff8801d0f3bac0 R15:
dffffc0000000000
attach_default_qdiscs net/sched/sch_generic.c:792 [inline]
dev_activate+0x7d3/0xaa0 net/sched/sch_generic.c:833
__dev_open+0x227/0x330 net/core/dev.c:1380
__dev_change_flags+0x695/0x990 net/core/dev.c:6726
dev_change_flags+0x88/0x140 net/core/dev.c:6792
dev_ifsioc+0x5a6/0x930 net/core/dev_ioctl.c:256
dev_ioctl+0x2bc/0xf90 net/core/dev_ioctl.c:554
sock_do_ioctl+0x94/0xb0 net/socket.c:968
sock_ioctl+0x2c2/0x440 net/socket.c:1058
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
Fixes: 7b9364050246 ("net, sched: convert Qdisc.refcnt from atomic_t to refcount_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Reshetova, Elena <elena.reshetova@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 24 Aug 2017 23:01:13 +0000 (16:01 -0700)]
net: systemport: Free DMA coherent descriptors on errors
In case bcm_sysport_init_tx_ring() is not able to allocate ring->cbs, we
would return with an error, and call bcm_sysport_fini_tx_ring() and it
would see that ring->cbs is NULL and do nothing. This would leak the
coherent DMA descriptor area, so we need to free it on error before
returning.
Reported-by: Eric Dumazet <edumazet@gmail.com>
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 24 Aug 2017 22:56:29 +0000 (15:56 -0700)]
net: bcmgenet: Be drop monitor friendly
There are 3 spots where we call dev_kfree_skb() but we are actually
just doing a normal SKB consumption: __bcmgenet_tx_reclaim() for normal
TX reclamation, bcmgenet_alloc_rx_buffers() during the initial RX ring
setup and bcmgenet_free_rx_buffers() during RX ring cleanup.
Fixes: d6707bec5986 ("net: bcmgenet: rewrite bcmgenet_rx_refill()")
Fixes: f48bed16a756 ("net: bcmgenet: Free skb after last Tx frag")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 24 Aug 2017 22:48:21 +0000 (15:48 -0700)]
bpf: fix bpf_setsockopts return value
This patch fixes a bug causing any sock operations to always return EINVAL.
Fixes: a5192c52377e ("bpf: fix to bpf_setsockops").
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Craig Gallek <kraig@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 24 Aug 2017 22:20:41 +0000 (15:20 -0700)]
net: systemport: Be drop monitor friendly
Utilize dev_consume_skb_any(cb->skb) in bcm_sysport_free_cb() which is
used when a TX packet is completed, as well as when the RX ring is
cleaned on shutdown. None of these two cases are packet drops, so be
drop monitor friendly.
Suggested-by: Eric Dumazet <edumazet@gmail.com>
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bob Peterson [Wed, 23 Aug 2017 14:43:02 +0000 (10:43 -0400)]
tipc: Fix tipc_sk_reinit handling of -EAGAIN
In
9dbbfb0ab6680c6a85609041011484e6658e7d3c function tipc_sk_reinit
had additional logic added to loop in the event that function
rhashtable_walk_next() returned -EAGAIN. No worries.
However, if rhashtable_walk_start returns -EAGAIN, it does "continue",
and therefore skips the call to rhashtable_walk_stop(). That has
the effect of calling rcu_read_lock() without its paired call to
rcu_read_unlock(). Since rcu_read_lock() may be nested, the problem
may not be apparent for a while, especially since resize events may
be rare. But the comments to rhashtable_walk_start() state:
* ...Note that we take the RCU lock in all
* cases including when we return an error. So you must always call
* rhashtable_walk_stop to clean up.
This patch replaces the continue with a goto and label to ensure a
matching call to rhashtable_walk_stop().
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 23 Aug 2017 13:59:49 +0000 (15:59 +0200)]
qlge: avoid memcpy buffer overflow
gcc-8.0.0 (snapshot) points out that we copy a variable-length string
into a fixed length field using memcpy() with the destination length,
and that ends up copying whatever follows the string:
inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2:
drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=]
memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);
Changing it to use strncpy() will instead zero-pad the destination,
which seems to be the right thing to do here.
The bug is probably harmless, but it seems like a good idea to address
it in stable kernels as well, if only for the purpose of building with
gcc-8 without warnings.
Fixes: a61f80261306 ("qlge: Add ethtool register dump function.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 24 Aug 2017 16:02:49 +0000 (09:02 -0700)]
virtio_net: be drop monitor friendly
This change is needed to not fool drop monitor.
(perf record ... -e skb:kfree_skb )
Packets were properly sent and are consumed after TX completion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 24 Aug 2017 18:49:19 +0000 (11:49 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Fix use after free of struct proc_dir_entry in ipt_CLUSTERIP, patch
from Sabrina Dubroca.
2) Fix spurious EINVAL errors from iptables over nft compatibility layer.
3) Reload pointer to ip header only if there is non-terminal verdict,
ie. XT_CONTINUE, otherwise invalid memory access may happen, patch
from Taehee Yoo.
4) Fix interaction between SYNPROXY and NAT, SYNPROXY adds sequence
adjustment already, however from nf_nat_setup() assumes there's not.
Patch from Xin Long.
5) Fix burst arithmetics in nft_limit as Joe Stringer mentioned during
NFWS in Faro. Patch from Andy Zhou.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
andy zhou [Mon, 21 Aug 2017 19:38:53 +0000 (12:38 -0700)]
netfilter: nf_tables: Fix nft limit burst handling
Current implementation treats the burst configuration the same as
rate configuration. This can cause the per packet cost to be lower
than configured. In effect, this bug causes the token bucket to be
refilled at a higher rate than what user has specified.
This patch changes the implementation so that the token bucket size
is controlled by "rate + burst", while maintain the token bucket
refill rate the same as user specified.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Andy Zhou <azhou@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Xin Long [Thu, 10 Aug 2017 02:22:24 +0000 (10:22 +0800)]
netfilter: check for seqadj ext existence before adding it in nf_nat_setup_info
Commit
4440a2ab3b9f ("netfilter: synproxy: Check oom when adding synproxy
and seqadj ct extensions") wanted to drop the packet when it fails to add
seqadj ext due to no memory by checking if nfct_seqadj_ext_add returns
NULL.
But that nfct_seqadj_ext_add returns NULL can also happen when seqadj ext
already exists in a nf_conn. It will cause that userspace protocol doesn't
work when both dnat and snat are configured.
Li Shuang found this issue in the case:
Topo:
ftp client router ftp server
10.167.131.2 <-> 10.167.131.254 10.167.141.254 <-> 10.167.141.1
Rules:
# iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 21 -j \
DNAT --to-destination 10.167.141.1
# iptables -t nat -A POSTROUTING -o eth2 -p tcp -m tcp --dport 21 -j \
SNAT --to-source 10.167.141.254
In router, when both dnat and snat are added, nf_nat_setup_info will be
called twice. The packet can be dropped at the 2nd time for DNAT due to
seqadj ext is already added at the 1st time for SNAT.
This patch is to fix it by checking for seqadj ext existence before adding
it, so that the packet will not be dropped if seqadj ext already exists.
Note that as Florian mentioned, as a long term, we should review ext_add()
behaviour, it's better to return a pointer to the existing ext instead.
Fixes: 4440a2ab3b9f ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions")
Reported-by: Li Shuang <shuali@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Luca Coelho [Tue, 22 Aug 2017 07:37:29 +0000 (10:37 +0300)]
iwlwifi: pcie: move rx workqueue initialization to iwl_trans_pcie_alloc()
Work queues cannot be allocated when a mutex is held because the mutex
may be in use and that would make it sleep. Doing so generates the
following splat with 4.13+:
[ 19.513298] ======================================================
[ 19.513429] WARNING: possible circular locking dependency detected
[ 19.513557] 4.13.0-rc5+ #6 Not tainted
[ 19.513638] ------------------------------------------------------
[ 19.513767] cpuhp/0/12 is trying to acquire lock:
[ 19.513867] (&tz->lock){+.+.+.}, at: [<
ffffffff924afebb>] thermal_zone_get_temp+0x5b/0xb0
[ 19.514047]
[ 19.514047] but task is already holding lock:
[ 19.514166] (cpuhp_state){+.+.+.}, at: [<
ffffffff91cc4baa>] cpuhp_thread_fun+0x3a/0x210
[ 19.514338]
[ 19.514338] which lock already depends on the new lock.
This lock dependency already existed with previous kernel versions,
but it was not detected until commit
49dfe2a67797 ("cpuhotplug: Link
lock stacks for hotplug callbacks") was introduced.
Reported-by: David Weinehall <david.weinehall@intel.com>
Reported-by: Jiri Kosina <jikos@kernel.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Lorenzo Colitti [Wed, 23 Aug 2017 08:14:39 +0000 (17:14 +0900)]
net: xfrm: don't double-hold dst when sk_policy in use.
While removing dst_entry garbage collection, commit
52df157f17e5
("xfrm: take refcnt of dst when creating struct xfrm_dst bundle")
changed xfrm_resolve_and_create_bundle so it returns an xdst with
a refcount of 1 instead of 0.
However, it did not delete the dst_hold performed by xfrm_lookup
when a per-socket policy is in use. This means that when a
socket policy is in use, dst entries returned by xfrm_lookup have
a refcount of 2, and are not freed when no longer in use.
Cc: Wei Wang <weiwan@google.com>
Fixes: 52df157f17 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle")
Tested: https://android-review.googlesource.com/417481
Tested: https://android-review.googlesource.com/418659
Tested: https://android-review.googlesource.com/424463
Tested: https://android-review.googlesource.com/452776 passes on net-next
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
David S. Miller [Thu, 24 Aug 2017 05:42:43 +0000 (22:42 -0700)]
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says:
====================
bnxt_en: bug fixes.
3 bug fixes related to XDP ring accounting in bnxt_setup_tc(), freeing
MSIX vectors when bnxt_re unregisters, and preserving the user-administered
PF MAC address when disabling SRIOV.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 23 Aug 2017 23:34:05 +0000 (19:34 -0400)]
bnxt_en: Do not setup MAC address in bnxt_hwrm_func_qcaps().
bnxt_hwrm_func_qcaps() is called during probe to get all device
resources and it also sets up the factory MAC address. The same function
is called when SRIOV is disabled to reclaim all resources. If
the MAC address has been overridden by a user administered MAC
address, calling this function will overwrite it.
Separate the logic that sets up the default MAC address into a new
function bnxt_init_mac_addr() that is only called during probe time.
Fixes: 4a21b49b34c0 ("bnxt_en: Improve VF resource accounting.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 23 Aug 2017 23:34:04 +0000 (19:34 -0400)]
bnxt_en: Free MSIX vectors when unregistering the device from bnxt_re.
Take back ownership of the MSIX vectors when unregistering the device
from bnxt_re.
Fixes: a588e4580a7e ("bnxt_en: Add interface to support RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 23 Aug 2017 23:34:03 +0000 (19:34 -0400)]
bnxt_en: Fix .ndo_setup_tc() to include XDP rings.
When the number of TX rings is changed in bnxt_setup_tc(), we need to
include the XDP rings in the total TX ring count.
Fixes: 38413406277f ("bnxt_en: Add support for XDP_TX action.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 23 Aug 2017 21:41:50 +0000 (14:41 -0700)]
nfp: TX time stamp packets before HW doorbell is rung
TX completion may happen any time after HW queue was kicked.
We can't access the skb afterwards. Move the time stamping
before ringing the doorbell.
Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Wed, 23 Aug 2017 11:27:13 +0000 (13:27 +0200)]
sctp: Avoid out-of-bounds reads from address storage
inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy
sizeof(sockaddr_storage) bytes to fill in sockaddr structs used
to export diagnostic information to userspace.
However, the memory allocated to store sockaddr information is
smaller than that and depends on the address family, so we leak
up to 100 uninitialized bytes to userspace. Just use the size of
the source structs instead, in all the three cases this is what
userspace expects. Zero out the remaining memory.
Unused bytes (i.e. when IPv4 addresses are used) in source
structs sctp_sockaddr_entry and sctp_transport are already
cleared by sctp_add_bind_addr() and sctp_transport_new(),
respectively.
Noticed while testing KASAN-enabled kernel with 'ss':
[ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr
ffff881be8779800
[ 2326.896800] Read of size 128 by task ss/9527
[ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1
[ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
[ 2326.917585] Call Trace:
[ 2326.920312] dump_stack+0x63/0x8d
[ 2326.924014] kasan_object_err+0x21/0x70
[ 2326.928295] kasan_report+0x288/0x540
[ 2326.932380] ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag]
[ 2326.938500] ? skb_put+0x8b/0xd0
[ 2326.942098] ? memset+0x31/0x40
[ 2326.945599] check_memory_region+0x13c/0x1a0
[ 2326.950362] memcpy+0x23/0x50
[ 2326.953669] inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag]
[ 2326.959596] ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag]
[ 2326.966495] ? __lock_sock+0x102/0x150
[ 2326.970671] ? sock_def_wakeup+0x60/0x60
[ 2326.975048] ? remove_wait_queue+0xc0/0xc0
[ 2326.979619] sctp_diag_dump+0x44a/0x760 [sctp_diag]
[ 2326.985063] ? sctp_ep_dump+0x280/0x280 [sctp_diag]
[ 2326.990504] ? memset+0x31/0x40
[ 2326.994007] ? mutex_lock+0x12/0x40
[ 2326.997900] __inet_diag_dump+0x57/0xb0 [inet_diag]
[ 2327.003340] ? __sys_sendmsg+0x150/0x150
[ 2327.007715] inet_diag_dump+0x4d/0x80 [inet_diag]
[ 2327.012979] netlink_dump+0x1e6/0x490
[ 2327.017064] __netlink_dump_start+0x28e/0x2c0
[ 2327.021924] inet_diag_handler_cmd+0x189/0x1a0 [inet_diag]
[ 2327.028045] ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag]
[ 2327.034651] ? inet_diag_dump_compat+0x190/0x190 [inet_diag]
[ 2327.040965] ? __netlink_lookup+0x1b9/0x260
[ 2327.045631] sock_diag_rcv_msg+0x18b/0x1e0
[ 2327.050199] netlink_rcv_skb+0x14b/0x180
[ 2327.054574] ? sock_diag_bind+0x60/0x60
[ 2327.058850] sock_diag_rcv+0x28/0x40
[ 2327.062837] netlink_unicast+0x2e7/0x3b0
[ 2327.067212] ? netlink_attachskb+0x330/0x330
[ 2327.071975] ? kasan_check_write+0x14/0x20
[ 2327.076544] netlink_sendmsg+0x5be/0x730
[ 2327.080918] ? netlink_unicast+0x3b0/0x3b0
[ 2327.085486] ? kasan_check_write+0x14/0x20
[ 2327.090057] ? selinux_socket_sendmsg+0x24/0x30
[ 2327.095109] ? netlink_unicast+0x3b0/0x3b0
[ 2327.099678] sock_sendmsg+0x74/0x80
[ 2327.103567] ___sys_sendmsg+0x520/0x530
[ 2327.107844] ? __get_locked_pte+0x178/0x200
[ 2327.112510] ? copy_msghdr_from_user+0x270/0x270
[ 2327.117660] ? vm_insert_page+0x360/0x360
[ 2327.122133] ? vm_insert_pfn_prot+0xb4/0x150
[ 2327.126895] ? vm_insert_pfn+0x32/0x40
[ 2327.131077] ? vvar_fault+0x71/0xd0
[ 2327.134968] ? special_mapping_fault+0x69/0x110
[ 2327.140022] ? __do_fault+0x42/0x120
[ 2327.144008] ? __handle_mm_fault+0x1062/0x17a0
[ 2327.148965] ? __fget_light+0xa7/0xc0
[ 2327.153049] __sys_sendmsg+0xcb/0x150
[ 2327.157133] ? __sys_sendmsg+0xcb/0x150
[ 2327.161409] ? SyS_shutdown+0x140/0x140
[ 2327.165688] ? exit_to_usermode_loop+0xd0/0xd0
[ 2327.170646] ? __do_page_fault+0x55d/0x620
[ 2327.175216] ? __sys_sendmsg+0x150/0x150
[ 2327.179591] SyS_sendmsg+0x12/0x20
[ 2327.183384] do_syscall_64+0xe3/0x230
[ 2327.187471] entry_SYSCALL64_slow_path+0x25/0x25
[ 2327.192622] RIP: 0033:0x7f41d18fa3b0
[ 2327.196608] RSP: 002b:
00007ffc3b731218 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 2327.205055] RAX:
ffffffffffffffda RBX:
00007ffc3b731380 RCX:
00007f41d18fa3b0
[ 2327.213017] RDX:
0000000000000000 RSI:
00007ffc3b731340 RDI:
0000000000000003
[ 2327.220978] RBP:
0000000000000002 R08:
0000000000000004 R09:
0000000000000040
[ 2327.228939] R10:
00007ffc3b730f30 R11:
0000000000000246 R12:
0000000000000003
[ 2327.236901] R13:
00007ffc3b731340 R14:
00007ffc3b7313d0 R15:
0000000000000084
[ 2327.244865] Object at
ffff881be87797e0, in cache kmalloc-64 size: 64
[ 2327.251953] Allocated:
[ 2327.254581] PID = 9484
[ 2327.257215] save_stack_trace+0x1b/0x20
[ 2327.261485] save_stack+0x46/0xd0
[ 2327.265179] kasan_kmalloc+0xad/0xe0
[ 2327.269165] kmem_cache_alloc_trace+0xe6/0x1d0
[ 2327.274138] sctp_add_bind_addr+0x58/0x180 [sctp]
[ 2327.279400] sctp_do_bind+0x208/0x310 [sctp]
[ 2327.284176] sctp_bind+0x61/0xa0 [sctp]
[ 2327.288455] inet_bind+0x5f/0x3a0
[ 2327.292151] SYSC_bind+0x1a4/0x1e0
[ 2327.295944] SyS_bind+0xe/0x10
[ 2327.299349] do_syscall_64+0xe3/0x230
[ 2327.303433] return_from_SYSCALL_64+0x0/0x6a
[ 2327.308194] Freed:
[ 2327.310434] PID = 4131
[ 2327.313065] save_stack_trace+0x1b/0x20
[ 2327.317344] save_stack+0x46/0xd0
[ 2327.321040] kasan_slab_free+0x73/0xc0
[ 2327.325220] kfree+0x96/0x1a0
[ 2327.328530] dynamic_kobj_release+0x15/0x40
[ 2327.333195] kobject_release+0x99/0x1e0
[ 2327.337472] kobject_put+0x38/0x70
[ 2327.341266] free_notes_attrs+0x66/0x80
[ 2327.345545] mod_sysfs_teardown+0x1a5/0x270
[ 2327.350211] free_module+0x20/0x2a0
[ 2327.354099] SyS_delete_module+0x2cb/0x2f0
[ 2327.358667] do_syscall_64+0xe3/0x230
[ 2327.362750] return_from_SYSCALL_64+0x0/0x6a
[ 2327.367510] Memory state around the buggy address:
[ 2327.372855]
ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2327.380914]
ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00
[ 2327.388972] >
ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb
[ 2327.397031] ^
[ 2327.401792]
ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[ 2327.409850]
ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00
[ 2327.417907] ==================================================================
This fixes CVE-2017-7558.
References: https://bugzilla.redhat.com/show_bug.cgi?id=
1480266
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 24 Aug 2017 04:40:32 +0000 (21:40 -0700)]
net: dsa: use consume_skb()
Two kfree_skb() should be consume_skb(), to be friend with drop monitor
(perf record ... -e skb:kfree_skb)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 24 Aug 2017 03:39:44 +0000 (20:39 -0700)]
Merge branch 'nfp-fixes'
Jakub Kicinski says:
====================
nfp: fix SR-IOV deadlock and representor bugs
This series tackles the bug I've already tried to fix in commit
6d48ceb27af1 ("nfp: allocate a private workqueue for driver work").
I created a separate workqueue to avoid possible deadlock, and
the lockdep error disappeared, coincidentally. The way workqueues
are operating, separate workqueue doesn't necessarily mean separate
thread of execution. Luckily we can safely forego the lock.
Second fix changes the order in which vNIC netdevs and representors
are created/destroyed. The fix is kept small and should be sufficient
for net because of how flower uses representors, a more thorough fix
will be targeted at net-next.
Third fix avoids leaking mapped frame buffers if FW sent a frame with
unknown portid.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 23 Aug 2017 06:22:44 +0000 (23:22 -0700)]
nfp: avoid buffer leak when representor is missing
When driver receives a muxed frame, but it can't find the representor
netdev it is destined to it will try to "drop" that frame, i.e. reuse
the buffer. The issue is that the replacement buffer has already been
allocated at this point, and reusing the buffer from received frame
will leak it. Change the code to put the new buffer on the ring
earlier and not reuse the old buffer (make the buffer parameter
to nfp_net_rx_drop() a NULL).
Fixes: 91bf82ca9eed ("nfp: add support for tx/rx with metadata portid")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 23 Aug 2017 06:22:43 +0000 (23:22 -0700)]
nfp: make sure representors are destroyed before their lower netdev
App start/stop callbacks can perform application initialization.
Unfortunately, flower app started using them for creating and
destroying representors. This can lead to a situation where
lower vNIC netdev is destroyed while representors still try
to pass traffic. This will most likely lead to a NULL-dereference
on the lower netdev TX path.
Move the start/stop callbacks, so that representors are created/
destroyed when vNICs are fully initialized.
Fixes: 5de73ee46704 ("nfp: general representor implementation")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 23 Aug 2017 06:22:42 +0000 (23:22 -0700)]
nfp: don't hold PF lock while enabling SR-IOV
Enabling SR-IOV VFs will cause the PCI subsystem to schedule a
work and flush its workqueue. Since the nfp driver schedules its
own work we can't enable VFs while holding driver load. Commit
6d48ceb27af1 ("nfp: allocate a private workqueue for driver work")
tried to avoid this deadlock by creating a separate workqueue.
Unfortunately, due to the architecture of workqueue subsystem this
does not guarantee a separate thread of execution. Luckily
we can simply take pci_enable_sriov() from under the driver lock.
Take pci_disable_sriov() from under the lock too for symmetry.
Fixes: 6d48ceb27af1 ("nfp: allocate a private workqueue for driver work")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 24 Aug 2017 03:33:49 +0000 (20:33 -0700)]
Merge branch 'dst-tag-ksz-fix'
Florian Fainelli says:
====================
net: dsa: Fix tag_ksz.c
This implements David's suggestion of providing low-level functions
to control whether skb_pad() and skb_put_padto() should be freeing
the passed skb.
We make use of it to fix a double free in net/dsa/tag_ksz.c that would
occur if we kept using skb_put_padto() in both places.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 22 Aug 2017 22:12:15 +0000 (15:12 -0700)]
net: dsa: skb_put_padto() already frees nskb
The first call of skb_put_padto() will free up the SKB on error, but we
return NULL which tells dsa_slave_xmit() that the original SKB should be
freed so this would lead to a double free here.
The second skb_put_padto() already frees the passed sk_buff reference
upon error, so calling kfree_skb() on it again is not necessary.
Detected by CoverityScan, CID#
1416687 ("USE_AFTER_FREE")
Fixes: e71cb9e00922 ("net: dsa: ksz: fix skb freeing")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 22 Aug 2017 22:12:14 +0000 (15:12 -0700)]
net: core: Specify skb_pad()/skb_put_padto() SKB freeing
Rename skb_pad() into __skb_pad() and make it take a third argument:
free_on_error which controls whether kfree_skb() should be called or
not, skb_pad() directly makes use of it and passes true to preserve its
existing behavior. Do exactly the same thing with __skb_put_padto() and
skb_put_padto().
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephan Gatzka [Tue, 22 Aug 2017 12:25:07 +0000 (14:25 +0200)]
net: stmmac: socfgpa: Ensure emac bit set in sys manager for MII/GMII/SGMII.
When using MII/GMII/SGMII in the Altera SoC, the phy needs to be
wired through the FPGA. To ensure correct behavior, the appropriate
bit in the System Manager FPGA Interface Group register needs to be
set.
Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 22 Aug 2017 22:24:47 +0000 (15:24 -0700)]
fsl/man: Inherit parent device and of_node
Junote Cai reported that he was not able to get a DSA setup involving the
Freescale DPAA/FMAN driver to work and narrowed it down to
of_find_net_device_by_node(). This function requires the network device's
device reference to be correctly set which is the case here, though we have
lost any device_node association there.
The problem is that dpaa_eth_add_device() allocates a "dpaa-ethernet" platform
device, and later on dpaa_eth_probe() is called but SET_NETDEV_DEV() won't be
propagating &pdev->dev.of_node properly. Fix this by inherenting both the parent
device and the of_node when dpaa_eth_add_device() creates the platform device.
Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 22 Aug 2017 22:06:09 +0000 (00:06 +0200)]
bpf: fix map value attribute for hash of maps
Currently, iproute2's BPF ELF loader works fine with array of maps
when retrieving the fd from a pinned node and doing a selfcheck
against the provided map attributes from the object file, but we
fail to do the same for hash of maps and thus refuse to get the
map from pinned node.
Reason is that when allocating hash of maps, fd_htab_map_alloc() will
set the value size to sizeof(void *), and any user space map creation
requests are forced to set 4 bytes as value size. Thus, selfcheck
will complain about exposed 8 bytes on 64 bit archs vs. 4 bytes from
object file as value size. Contract is that fdinfo or BPF_MAP_GET_FD_BY_ID
returns the value size used to create the map.
Fix it by handling it the same way as we do for array of maps, which
means that we leave value size at 4 bytes and in the allocation phase
round up value size to 8 bytes. alloc_htab_elem() needs an adjustment
in order to copy rounded up 8 bytes due to bpf_fd_htab_map_update_elem()
calling into htab_map_update_elem() with the pointer of the map
pointer as value. Unlike array of maps where we just xchg(), we're
using the generic htab_map_update_elem() callback also used from helper
calls, which published the key/value already on return, so we need
to ensure to memcpy() the right size.
Fixes: bcc6b1b7ebf8 ("bpf: Add hash of maps support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 22 Aug 2017 21:26:47 +0000 (14:26 -0700)]
net: phy: Deal with unbound PHY driver in phy_attached_print()
Priit reported that stmmac was crashing with the trace below. This is because
phy_attached_print() is called too early right after the PHY device has been
found, but before it has a driver attached, since that is only done in
phy_probe() which occurs later.
Fix this by dealing with a possibly NULL phydev->drv point since that can
happen here, but could also happen if we voluntarily did an unbind of the
PHY device with the PHY driver.
sun7i-dwmac
1c50000.ethernet: PTP uses main clock
sun7i-dwmac
1c50000.ethernet: no reset control found
sun7i-dwmac
1c50000.ethernet: no regulator found
sun7i-dwmac
1c50000.ethernet: Ring mode enabled
sun7i-dwmac
1c50000.ethernet: DMA HW capability register supported
sun7i-dwmac
1c50000.ethernet: Normal descriptors
libphy: stmmac: probed
Unable to handle kernel NULL pointer dereference at virtual address
00000048
pgd =
c0004000
[
00000048] *pgd=
00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.13.0-rc6-00318-g0065bd7fa384 #1
Hardware name: Allwinner sun7i (A20) Family
task:
ee868000 task.stack:
ee85c000
PC is at phy_attached_print+0x1c/0x8c
LR is at stmmac_mdio_register+0x12c/0x200
pc : [<
c04510ac>] lr : [<
c045e6b4>] psr:
60000013
sp :
ee85ddc8 ip :
00000000 fp :
c07dfb5c
r10:
ee981210 r9 :
00000001 r8 :
eea73000
r7 :
eeaa6dd0 r6 :
eeb49800 r5 :
00000000 r4 :
00000000
r3 :
00000000 r2 :
00000000 r1 :
00000000 r0 :
eeb49800
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
10c5387d Table:
4000406a DAC:
00000051
Process swapper/0 (pid: 1, stack limit = 0xee85c210)
Stack: (0xee85ddc8 to 0xee85e000)
ddc0:
00000000 00000002 eeb49400 eea72000 00000000 eeb49400
dde0:
c045e6b4 00000000 ffffffff eeab0810 00000000 c08051f8 ee9292c0 c016d480
de00:
eea725c0 eea73000 eea72000 00000001 eea726c0 c0457d0c 00000040 00000020
de20:
00000000 c045b850 00000001 00000000 ee981200 eeab0810 eeaa6ed0 ee981210
de40:
00000000 c094a4a0 00000000 c0465180 eeaa7550 f08d0000 c9ffb90c 00000032
de60:
fffffffa 00000032 ee981210 ffffffed c0a46620 fffffdfb c0a46620 c03f7be8
de80:
ee981210 c0a9a388 00000000 00000000 c0a46620 c03f63e0 ee981210 c0a46620
dea0:
ee981244 00000000 00000007 000000c6 c094a4a0 c03f6534 00000000 c0a46620
dec0:
c03f6490 c03f49ec ee828a58 ee9217b4 c0a46620 eeaa4b00 c0a43230 c03f59fc
dee0:
c08051f8 c094a49c c0a46620 c0a46620 00000000 c091c668 c093783c c03f6dfc
df00:
ffffe000 00000000 c091c668 c010177c eefe0938 eefe0935 c085e200 000000c6
df20:
00000005 c0136bc8 60000013 c080b3a4 00000006 00000006 c07ce7b4 00000000
df40:
c07d7ddc c07cef28 eefe0938 eefe093e c0a0b2f0 c0a641c0 c0a641c0 c0a641c0
df60:
c0937834 00000007 000000c6 c094a4a0 00000000 c0900d88 00000006 00000006
df80:
00000000 c09005a8 00000000 c060ecf4 00000000 00000000 00000000 00000000
dfa0:
00000000 c060ecfc 00000000 c0107738 00000000 00000000 00000000 00000000
dfc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0:
00000000 00000000 00000000 00000000 00000013 00000000 ffdeffff ffffffff
[<
c04510ac>] (phy_attached_print) from [<
c045e6b4>] (stmmac_mdio_register+0x12c/0x200)
[<
c045e6b4>] (stmmac_mdio_register) from [<
c045b850>] (stmmac_dvr_probe+0x850/0x96c)
[<
c045b850>] (stmmac_dvr_probe) from [<
c0465180>] (sun7i_gmac_probe+0x120/0x180)
[<
c0465180>] (sun7i_gmac_probe) from [<
c03f7be8>] (platform_drv_probe+0x50/0xac)
[<
c03f7be8>] (platform_drv_probe) from [<
c03f63e0>] (driver_probe_device+0x234/0x2e4)
[<
c03f63e0>] (driver_probe_device) from [<
c03f6534>] (__driver_attach+0xa4/0xa8)
[<
c03f6534>] (__driver_attach) from [<
c03f49ec>] (bus_for_each_dev+0x4c/0x9c)
[<
c03f49ec>] (bus_for_each_dev) from [<
c03f59fc>] (bus_add_driver+0x190/0x214)
[<
c03f59fc>] (bus_add_driver) from [<
c03f6dfc>] (driver_register+0x78/0xf4)
[<
c03f6dfc>] (driver_register) from [<
c010177c>] (do_one_initcall+0x44/0x168)
[<
c010177c>] (do_one_initcall) from [<
c0900d88>] (kernel_init_freeable+0x144/0x1d0)
[<
c0900d88>] (kernel_init_freeable) from [<
c060ecfc>] (kernel_init+0x8/0x110)
[<
c060ecfc>] (kernel_init) from [<
c0107738>] (ret_from_fork+0x14/0x3c)
Code:
e59021c8 e59d401c e590302c e3540000 (
e5922048)
---[ end trace
39ae87c7923562d0 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Tested-By: Priit Laes <plaes@plaes.org>
Fixes: fbca164776e4 ("net: stmmac: Use the right logging function in stmmac_mdio_register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Aug 2017 21:39:59 +0000 (14:39 -0700)]
Merge branch 'net-sched-couple-of-chain-fixes'
Jiri Pirko says:
====================
net: sched: couple of chain fixes
Jiri Pirko (2):
net: sched: fix use after free when tcf_chain_destroy is called
multiple times
net: sched: don't do tcf_chain_flush from tcf_chain_destroy
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 22 Aug 2017 20:46:50 +0000 (22:46 +0200)]
net: sched: don't do tcf_chain_flush from tcf_chain_destroy
tcf_chain_flush needs to be called with RTNL. However, on
free_tcf->
tcf_action_goto_chain_fini->
tcf_chain_put->
tcf_chain_destroy->
tcf_chain_flush
callpath, it is called without RTNL.
This issue was notified by following warning:
[ 155.599052] WARNING: suspicious RCU usage
[ 155.603165] 4.13.0-rc5jiri+ #54 Not tainted
[ 155.607456] -----------------------------
[ 155.611561] net/sched/cls_api.c:195 suspicious rcu_dereference_protected() usage!
Since on this callpath, the chain is guaranteed to be already empty
by check in tcf_chain_put, move the tcf_chain_flush call out and call it
only where it is needed - into tcf_block_put.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 22 Aug 2017 20:46:49 +0000 (22:46 +0200)]
net: sched: fix use after free when tcf_chain_destroy is called multiple times
The goto_chain termination action takes a reference of a chain. In that
case, there is an issue when block_put is called tcf_chain_destroy
directly. The follo-up call of tcf_chain_put by goto_chain action free
works with memory that is already freed. This was caught by kasan:
[ 220.337908] BUG: KASAN: use-after-free in tcf_chain_put+0x1b/0x50
[ 220.344103] Read of size 4 at addr
ffff88036d1f2cec by task systemd-journal/261
[ 220.353047] CPU: 0 PID: 261 Comm: systemd-journal Not tainted 4.13.0-rc5jiri+ #54
[ 220.360661] Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox x86 mezzanine board, BIOS 4.6.5 08/02/2016
[ 220.371784] Call Trace:
[ 220.374290] <IRQ>
[ 220.376355] dump_stack+0xd5/0x150
[ 220.391485] print_address_description+0x86/0x410
[ 220.396308] kasan_report+0x181/0x4c0
[ 220.415211] tcf_chain_put+0x1b/0x50
[ 220.418949] free_tcf+0x95/0xc0
So allow tcf_chain_destroy to be called multiple times, free only in
case the reference count drops to 0.
Fixes: 5bc1701881e3 ("net: sched: introduce multichain support for filters")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 22 Aug 2017 16:39:28 +0000 (09:39 -0700)]
udp: on peeking bad csum, drop packets even if not at head
When peeking, if a bad csum is discovered, the skb is unlinked from
the queue with __sk_queue_drop_skb and the peek operation restarted.
__sk_queue_drop_skb only drops packets that match the queue head.
This fails if the skb was found after the head, using SO_PEEK_OFF
socket option. This causes an infinite loop.
We MUST drop this problematic skb, and we can simply check if skb was
already removed by another thread, by looking at skb->next :
This pointer is set to NULL by the __skb_unlink() operation, that might
have happened only under the spinlock protection.
Many thanks to syzkaller team (and particularly Dmitry Vyukov who
provided us nice C reproducers exhibiting the lockup) and Willem de
Bruijn who provided first version for this patch and a test program.
Fixes: 627d2d6b5500 ("udp: enable MSG_PEEK at non-zero offset")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 22 Aug 2017 13:36:08 +0000 (15:36 +0200)]
macsec: add genl family module alias
This helps tools such as wpa_supplicant can start even if the macsec
module isn't loaded yet.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Aug 2017 21:25:02 +0000 (14:25 -0700)]
Merge branch 'tipc-topology-server-fixes'
Parthasarathy Bhuvaragan says:
====================
tipc: topology server fixes
The following commits fixes two race conditions causing general
protection faults.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Tue, 22 Aug 2017 10:28:41 +0000 (12:28 +0200)]
tipc: fix a race condition of releasing subscriber object
No matter whether a request is inserted into workqueue as a work item
to cancel a subscription or to delete a subscription's subscriber
asynchronously, the work items may be executed in different workers.
As a result, it doesn't mean that one request which is raised prior to
another request is definitely handled before the latter. By contrast,
if the latter request is executed before the former request, below
error may happen:
[ 656.183644] BUG: spinlock bad magic on CPU#0, kworker/u8:0/12117
[ 656.184487] general protection fault: 0000 [#1] SMP
[ 656.185160] Modules linked in: tipc ip6_udp_tunnel udp_tunnel 9pnet_virtio 9p 9pnet virtio_net virtio_pci virtio_ring virtio [last unloaded: ip6_udp_tunnel]
[ 656.187003] CPU: 0 PID: 12117 Comm: kworker/u8:0 Not tainted 4.11.0-rc7+ #6
[ 656.187920] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 656.188690] Workqueue: tipc_rcv tipc_recv_work [tipc]
[ 656.189371] task:
ffff88003f5cec40 task.stack:
ffffc90004448000
[ 656.190157] RIP: 0010:spin_bug+0xdd/0xf0
[ 656.190678] RSP: 0018:
ffffc9000444bcb8 EFLAGS:
00010202
[ 656.191375] RAX:
0000000000000034 RBX:
ffff88003f8d1388 RCX:
0000000000000000
[ 656.192321] RDX:
ffff88003ba13708 RSI:
ffff88003ba0cd08 RDI:
ffff88003ba0cd08
[ 656.193265] RBP:
ffffc9000444bcd0 R08:
0000000000000030 R09:
000000006b6b6b6b
[ 656.194208] R10:
ffff8800bde3e000 R11:
00000000000001b4 R12:
6b6b6b6b6b6b6b6b
[ 656.195157] R13:
ffffffff81a3ca64 R14:
ffff88003f8d1388 R15:
ffff88003f8d13a0
[ 656.196101] FS:
0000000000000000(0000) GS:
ffff88003ba00000(0000) knlGS:
0000000000000000
[ 656.197172] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 656.197935] CR2:
00007f0b3d2e6000 CR3:
000000003ef9e000 CR4:
00000000000006f0
[ 656.198873] Call Trace:
[ 656.199210] do_raw_spin_lock+0x66/0xa0
[ 656.199735] _raw_spin_lock_bh+0x19/0x20
[ 656.200258] tipc_subscrb_subscrp_delete+0x28/0xf0 [tipc]
[ 656.200990] tipc_subscrb_rcv_cb+0x45/0x260 [tipc]
[ 656.201632] tipc_receive_from_sock+0xaf/0x100 [tipc]
[ 656.202299] tipc_recv_work+0x2b/0x60 [tipc]
[ 656.202872] process_one_work+0x157/0x420
[ 656.203404] worker_thread+0x69/0x4c0
[ 656.203898] kthread+0x138/0x170
[ 656.204328] ? process_one_work+0x420/0x420
[ 656.204889] ? kthread_create_on_node+0x40/0x40
[ 656.205527] ret_from_fork+0x29/0x40
[ 656.206012] Code: 48 8b 0c 25 00 c5 00 00 48 c7 c7 f0 24 a3 81 48 81 c1 f0 05 00 00 65 8b 15 61 ef f5 7e e8 9a 4c 09 00 4d 85 e4 44 8b 4b 08 74 92 <45> 8b 84 24 40 04 00 00 49 8d 8c 24 f0 05 00 00 eb 8d 90 0f 1f
[ 656.208504] RIP: spin_bug+0xdd/0xf0 RSP:
ffffc9000444bcb8
[ 656.209798] ---[ end trace
e2a800e6eb0770be ]---
In above scenario, the request of deleting subscriber was performed
earlier than the request of canceling a subscription although the
latter was issued before the former, which means tipc_subscrb_delete()
was called before tipc_subscrp_cancel(). As a result, when
tipc_subscrb_subscrp_delete() called by tipc_subscrp_cancel() was
executed to cancel a subscription, the subscription's subscriber
refcnt had been decreased to 1. After tipc_subscrp_delete() where
the subscriber was freed because its refcnt was decremented to zero,
but the subscriber's lock had to be released, as a consequence, panic
happened.
By contrast, if we increase subscriber's refcnt before
tipc_subscrb_subscrp_delete() is called in tipc_subscrp_cancel(),
the panic issue can be avoided.
Fixes: d094c4d5f5c7 ("tipc: add subscription refcount to avoid invalid delete")
Reported-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Tue, 22 Aug 2017 10:28:40 +0000 (12:28 +0200)]
tipc: remove subscription references only for pending timers
In commit,
139bb36f754a ("tipc: advance the time of deleting
subscription from subscriber->subscrp_list"), we delete the
subscription from the subscribers list and from nametable
unconditionally. This leads to the following bug if the timer
running tipc_subscrp_timeout() in another CPU accesses the
subscription list after the subscription delete request.
[39.570] general protection fault: 0000 [#1] SMP
::
[39.574] task:
ffffffff81c10540 task.stack:
ffffffff81c00000
[39.575] RIP: 0010:tipc_subscrp_timeout+0x32/0x80 [tipc]
[39.576] RSP: 0018:
ffff88003ba03e90 EFLAGS:
00010282
[39.576] RAX:
dead000000000200 RBX:
ffff88003f0f3600 RCX:
0000000000000101
[39.577] RDX:
dead000000000100 RSI:
0000000000000201 RDI:
ffff88003f0d7948
[39.578] RBP:
ffff88003ba03ea0 R08:
0000000000000001 R09:
ffff88003ba03ef8
[39.579] R10:
000000000000014f R11:
0000000000000000 R12:
ffff88003f0d7948
[39.580] R13:
ffff88003f0f3618 R14:
ffffffffa006c250 R15:
ffff88003f0f3600
[39.581] FS:
0000000000000000(0000) GS:
ffff88003ba00000(0000) knlGS:
0000000000000000
[39.582] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[39.583] CR2:
00007f831c6e0714 CR3:
000000003d3b0000 CR4:
00000000000006f0
[39.584] Call Trace:
[39.584] <IRQ>
[39.585] call_timer_fn+0x3d/0x180
[39.585] ? tipc_subscrb_rcv_cb+0x260/0x260 [tipc]
[39.586] run_timer_softirq+0x168/0x1f0
[39.586] ? sched_clock_cpu+0x16/0xc0
[39.587] __do_softirq+0x9b/0x2de
[39.587] irq_exit+0x60/0x70
[39.588] smp_apic_timer_interrupt+0x3d/0x50
[39.588] apic_timer_interrupt+0x86/0x90
[39.589] RIP: 0010:default_idle+0x20/0xf0
[39.589] RSP: 0018:
ffffffff81c03e58 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffff10
[39.590] RAX:
0000000000000000 RBX:
ffffffff81c10540 RCX:
0000000000000000
[39.591] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
[39.592] RBP:
ffffffff81c03e68 R08:
0000000000000000 R09:
0000000000000000
[39.593] R10:
ffffc90001cbbe00 R11:
0000000000000000 R12:
0000000000000000
[39.594] R13:
ffffffff81c10540 R14:
0000000000000000 R15:
0000000000000000
[39.595] </IRQ>
::
[39.603] RIP: tipc_subscrp_timeout+0x32/0x80 [tipc] RSP:
ffff88003ba03e90
[39.604] ---[ end trace
79ce94b7216cb459 ]---
Fixes: 139bb36f754a ("tipc: advance the time of deleting subscription from subscriber->subscrp_list")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Tue, 22 Aug 2017 08:28:11 +0000 (10:28 +0200)]
mlxsw: spectrum_switchdev: Fix mrouter flag update
Update the value of the mrouter flag in struct mlxsw_sp_bridge_port when
it is being changed.
Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Jeffery [Tue, 22 Aug 2017 06:36:22 +0000 (16:06 +0930)]
net: ftgmac100: Fix oops in probe on failure to find associated PHY
netif_napi_del() should be paired with netif_napi_add(), however no
such call takes place in ftgmac100_probe(). This triggers a NULL
pointer dereference if e.g. no PHY is found by the MDIO probe:
[ 2.770000] libphy: Fixed MDIO Bus: probed
[ 2.770000] ftgmac100
1e660000.ethernet: Generated random MAC address 66:58:c0:5a:50:b8
[ 2.790000] libphy: ftgmac100_mdio: probed
[ 2.790000] ftgmac100
1e660000.ethernet (unnamed net_device) (uninitialized): eth%d: no PHY found
[ 2.790000] ftgmac100
1e660000.ethernet: MII Probe failed!
[ 2.810000] Unable to handle kernel NULL pointer dereference at virtual address
00000004
[ 2.810000] pgd =
80004000
[ 2.810000] [
00000004] *pgd=
00000000
[ 2.810000] Internal error: Oops: 805 [#1] ARM
[ 2.810000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.17-
1a4df30c39cf5ee0e3d2528c409787ccbb4a672a #1
[ 2.810000] Hardware name: ASpeed SoC
[ 2.810000] task:
9e421b60 task.stack:
9e4a0000
[ 2.810000] PC is at netif_napi_del+0x74/0xa4
[ 2.810000] LR is at ftgmac100_probe+0x290/0x674
[ 2.810000] pc : [<
80331004>] lr : [<
80292b30>] psr:
60000013
[ 2.810000] sp :
9e4a1d70 ip :
9e4a1d88 fp :
9e4a1d84
[ 2.810000] r10:
9e565000 r9 :
ffffffed r8 :
00000007
[ 2.810000] r7 :
9e565480 r6 :
9ec072c0 r5 :
00000000 r4 :
9e5654d8
[ 2.810000] r3 :
9e565530 r2 :
00000000 r1 :
00000000 r0 :
9e5654d8
[ 2.810000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 2.810000] Control:
00c5387d Table:
80004008 DAC:
00000055
[ 2.810000] Process swapper (pid: 1, stack limit = 0x9e4a0188)
[ 2.810000] Stack: (0x9e4a1d70 to 0x9e4a2000)
[ 2.810000] 1d60:
9e565000 9e549e10 9e4a1dcc 9e4a1d88
[ 2.810000] 1d80:
80292b30 80330f9c ffffffff 9e4a1d98 80146058 9ec072c0 00009e10 00000000
[ 2.810000] 1da0:
9e549e18 9e549e10 ffffffed 805f81f4 fffffdfb 00000000 00000000 00000000
[ 2.810000] 1dc0:
9e4a1dec 9e4a1dd0 80243df8 802928ac 9e549e10 8062cbd8 8062cbe0 805f81f4
[ 2.810000] 1de0:
9e4a1e24 9e4a1df0 80242178 80243da4 803001d0 802ffa60 9e4a1e24 9e549e10
[ 2.810000] 1e00:
9e549e44 805f81f4 00000000 00000000 805b8840 8058a6b0 9e4a1e44 9e4a1e28
[ 2.810000] 1e20:
80242434 80241f04 00000000 805f81f4 80242344 00000000 9e4a1e6c 9e4a1e48
[ 2.810000] 1e40:
80240148 80242350 9e425bac 9e4fdc90 9e790e94 805f81f4 9e790e60 805f5640
[ 2.810000] 1e60:
9e4a1e7c 9e4a1e70 802425dc 802400d8 9e4a1ea4 9e4a1e80 80240ba8 802425c0
[ 2.810000] 1e80:
8050b6ac 9e4a1e90 805f81f4 ffffe000 805b8838 80616720 9e4a1ebc 9e4a1ea8
[ 2.810000] 1ea0:
80243068 80240a68 805ab24c ffffe000 9e4a1ecc 9e4a1ec0 80244a38 80242fec
[ 2.810000] 1ec0:
9e4a1edc 9e4a1ed0 805ab264 80244a04 9e4a1f4c 9e4a1ee0 8058ae70 805ab258
[ 2.810000] 1ee0:
80032c68 801e3fd8 8052f800 8041af2c 9e4a1f4c 9e4a1f00 80032f90 8058a6bc
[ 2.810000] 1f00:
9e4a1f2c 9e4a1f10 00000006 00000006 00000000 8052f220 805112f0 00000000
[ 2.810000] 1f20:
9e4a1f4c 00000006 80616720 805cf400 80616720 805b8838 80616720 00000057
[ 2.810000] 1f40:
9e4a1f94 9e4a1f50 8058b040 8058add0 00000006 00000006 00000000 8058a6b0
[ 2.810000] 1f60:
3940bf3d 00000007 f115c2e8 00000000 803fd158 00000000 00000000 00000000
[ 2.810000] 1f80:
00000000 00000000 9e4a1fac 9e4a1f98 803fd170 8058af38 00000000 803fd158
[ 2.810000] 1fa0:
00000000 9e4a1fb0 8000a5e8 803fd164 00000000 00000000 00000000 00000000
[ 2.810000] 1fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.810000] 1fe0:
00000000 00000000 00000000 00000000 00000013 00000000 d11dcae8 af8ddec5
[ 2.810000] [<
80331004>] (netif_napi_del) from [<
80292b30>] (ftgmac100_probe+0x290/0x674)
[ 2.810000] [<
80292b30>] (ftgmac100_probe) from [<
80243df8>] (platform_drv_probe+0x60/0xc0)
[ 2.810000] [<
80243df8>] (platform_drv_probe) from [<
80242178>] (driver_probe_device+0x280/0x44c)
[ 2.810000] [<
80242178>] (driver_probe_device) from [<
80242434>] (__driver_attach+0xf0/0x104)
[ 2.810000] [<
80242434>] (__driver_attach) from [<
80240148>] (bus_for_each_dev+0x7c/0xb0)
[ 2.810000] [<
80240148>] (bus_for_each_dev) from [<
802425dc>] (driver_attach+0x28/0x30)
[ 2.810000] [<
802425dc>] (driver_attach) from [<
80240ba8>] (bus_add_driver+0x14c/0x268)
[ 2.810000] [<
80240ba8>] (bus_add_driver) from [<
80243068>] (driver_register+0x88/0x104)
[ 2.810000] [<
80243068>] (driver_register) from [<
80244a38>] (__platform_driver_register+0x40/0x54)
[ 2.810000] [<
80244a38>] (__platform_driver_register) from [<
805ab264>] (ftgmac100_driver_init+0x18/0x20)
[ 2.810000] [<
805ab264>] (ftgmac100_driver_init) from [<
8058ae70>] (do_one_initcall+0xac/0x168)
[ 2.810000] [<
8058ae70>] (do_one_initcall) from [<
8058b040>] (kernel_init_freeable+0x114/0x1cc)
[ 2.810000] [<
8058b040>] (kernel_init_freeable) from [<
803fd170>] (kernel_init+0x18/0x104)
[ 2.810000] [<
803fd170>] (kernel_init) from [<
8000a5e8>] (ret_from_fork+0x14/0x2c)
[ 2.810000] Code:
e594205c e5941058 e2843058 e3a05000 (
e5812004)
[ 3.210000] ---[ end trace
f32811052fd3860c ]---
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / openwrt / staging / blogic.git / log