git.openwrt.org Git - openwrt/staging/blogic.git/log

net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag

The ixgbe driver use the compile check to determine if it can
send TLPs to Root Port with the Relaxed Ordering Attribute set,
this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING
has been added to the kernel and we could check the bit4 in the PCIe
Device Control register to determine whether we should use the Relaxed
Ordering Attributes or not, so use this new way in the ixgbe driver.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Revert commit 1a8b6d76dc5b ("net:add one common config...")

The new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added
to indicate that Relaxed Ordering Attributes (RO) should not
be used for Transaction Layer Packets (TLP) targeted toward
these affected Root Port, it will clear the bit4 in the PCIe
Device Control register, so the PCIe device drivers could
query PCIe configuration space to determine if it can send
TLPs to Root Port with the Relaxed Ordering Attributes set.

With this new flag we don't need the config ARCH_WANT_RELAX_ORDER
to control the Relaxed Ordering Attributes for the ixgbe drivers
just like the commit 1a8b6d76dc5b ("net:add one common config...") did,
so revert this commit.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register

In ixgbe_clear_udp_tunnel_port(), we read the IXGBE_VXLANCTRL register
and then try to mask some bits out of the value, using the logical
instead of bitwise and operator.

Fixes: a21d0822ff69 ("ixgbe: add support for geneve Rx offload")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Return error when getting PHY address if PHY access is not supported

In cases where PHY register access is not supported, don't mislead
a caller into thinking that it is supported by returning a PHY
address. Instead, return -EOPNOTSUPP when PHY access is not
supported.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

tipc: Unclone message at secondary destination lookup

When a bundling message is received, the function tipc_link_input()
calls function tipc_msg_extract() to unbundle all inner messages of
the bundling message before adding them to input queue.

The function tipc_msg_extract() just clones all inner skb for all
inner messagges from the bundling skb. This means that the skb
headroom of an inner message overlaps with the data part of the
preceding message in the bundle.

If the message in question is a name addressed message, it may be
subject to a secondary destination lookup, and eventually be sent out
on one of the interfaces again. But, since what is perceived as headroom
by the device driver in reality is the last bytes of the preceding
message in the bundle, the latter will be overwritten by the MAC
addresses of the L2 header. If the preceding message has not yet been
consumed by the user, it will evenually be delivered with corrupted
contents.

This commit fixes this by uncloning all messages passing through the
function tipc_msg_lookup_dest(), hence ensuring that the headroom
is always valid when the message is passed on.

Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: correct initialization of skb list

We change the initialization of the skb transmit buffer queues
in the functions tipc_bcast_xmit() and tipc_rcast_xmit() to also
initialize their spinlocks. This is needed because we may, during
error conditions, need to call skb_queue_purge() on those queues
further down the stack.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gso: fix payload length when gso_size is zero

When gso_size reset to zero for the tail segment in skb_segment(), later
in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment()
we will get incorrect results (payload length, pcsum) for that segment.
inet_gso_segment() already has a check for gso_size before calculating
payload.

The issue was found with LTP vxlan & gre tests over ixgbe NIC.

Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_router: Avoid expensive lookup during route removal

In commit fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for
all virtual routers") I increased the scale of supported VRFs by having
all of them share the same LPM tree.

In order to avoid look-ups for prefix lengths that don't exist, each
route removal would trigger an aggregation across all the active virtual
routers to see which prefix lengths are in use and which aren't and
structure the tree accordingly.

With the way the data structures are currently laid out, this is a very
expensive operation. When preformed repeatedly - due to the invocation
of the abort mechanism - and with enough VRFs, this can result in a hung
task.

For now, avoid this optimization until it can be properly re-added in
net-next.

Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: fix liveness marking

while processing Rx = Ry instruction the verifier does
regs[insn->dst_reg] = regs[insn->src_reg]
which often clears write mark (when Ry doesn't have it)
that was just set by check_reg_arg(Rx) prior to the assignment.
That causes mark_reg_read() to keep marking Rx in this block as
REG_LIVE_READ (since the logic incorrectly misses that it's
screened by the write) and in many of its parents (until lucky
write into the same Rx or beginning of the program).
That causes is_state_visited() logic to miss many pruning opportunities.

Furthermore mark_reg_read() logic propagates the read mark
for BPF_REG_FP as well (though it's readonly) which causes
harmless but unnecssary work during is_state_visited().
Note that do_propagate_liveness() skips FP correctly,
so do the same in mark_reg_read() as well.
It saves 0.2 seconds for the test below

program               before  after
bpf_lb-DLB_L3.o       2604    2304
bpf_lb-DLB_L4.o       11159   3723
bpf_lb-DUNKNOWN.o     1116    1110
bpf_lxc-DDROP_ALL.o   34566   28004
bpf_lxc-DUNKNOWN.o    53267   39026
bpf_netdev.o          17843   16943
bpf_overlay.o         8672    7929
time                  ~11 sec  ~4 sec

Fixes: dc503a8ad984 ("bpf/verifier: track liveness for pruning")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

doc: Fix typo "8023.ad" in bonding documentation

Should be "802.3ad" like everywhere else in the document.

Signed-off-by: Axel Beckert <abe@deuxchevaux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real

Commit 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers")
was intended to affect accept_dad flag handling in such a way that
DAD operation and mode on a given interface would be selected
according to the maximum value of conf/{all,interface}/accept_dad.

However, addrconf_dad_begin() checks for particular cases in which we
need to skip DAD, and this check was modified in the wrong way.

Namely, it was modified so that, if the accept_dad flag is 0 for the
given interface *or* for all interfaces, DAD would be skipped.

We have instead to skip DAD if accept_dad is 0 for the given interface
*and* for all interfaces.

Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers")
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reported-by: Erik Kline <ek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ppp: fix race in ppp device destruction

ppp_release() tries to ensure that netdevices are unregistered before
decrementing the unit refcount and running ppp_destroy_interface().

This is all fine as long as the the device is unregistered by
ppp_release(): the unregister_netdevice() call, followed by
rtnl_unlock(), guarantee that the unregistration process completes
before rtnl_unlock() returns.

However, the device may be unregistered by other means (like
ppp_nl_dellink()). If this happens right before ppp_release() calling
rtnl_lock(), then ppp_release() has to wait for the concurrent
unregistration code to release the lock.
But rtnl_unlock() releases the lock before completing the device
unregistration process. This allows ppp_release() to proceed and
eventually call ppp_destroy_interface() before the unregistration
process completes. Calling free_netdev() on this partially unregistered
device will BUG():

------------[ cut here ]------------
kernel BUG at net/core/dev.c:8141!
invalid opcode: 0000 [#1] SMP

CPU: 1 PID: 1557 Comm: pppd Not tainted 4.14.0-rc2+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014

Call Trace:
  ppp_destroy_interface+0xd8/0xe0 [ppp_generic]
  ppp_disconnect_channel+0xda/0x110 [ppp_generic]
  ppp_unregister_channel+0x5e/0x110 [ppp_generic]
  pppox_unbind_sock+0x23/0x30 [pppox]
  pppoe_connect+0x130/0x440 [pppoe]
  SYSC_connect+0x98/0x110
  ? do_fcntl+0x2c0/0x5d0
  SyS_connect+0xe/0x10
  entry_SYSCALL_64_fastpath+0x1a/0xa5

RIP: free_netdev+0x107/0x110 RSP: ffffc28a40573d88
---[ end trace ed294ff0cc40eeff ]---

We could set the ->needs_free_netdev flag on PPP devices and move the
ppp_destroy_interface() logic in the ->priv_destructor() callback. But
that'd be quite intrusive as we'd first need to unlink from the other
channels and units that depend on the device (the ones that used the
PPPIOCCONNECT and PPPIOCATTACH ioctls).

Instead, we can just let the netdevice hold a reference on its
ppp_file. This reference is dropped in ->priv_destructor(), at the very
end of the unregistration process, so that neither ppp_release() nor
ppp_disconnect_channel() can call ppp_destroy_interface() in the interim.

Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: rxtimestamp: Fix an off by one

The > should be >= so that we don't write one element beyond the end of
the array.

Fixes: 16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'pm-4.14-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"This fixes a code ordering issue in the main suspend-to-idle loop that
  causes some "low power S0 idle" conditions to be incorrectly reported
  as unmet with suspend/resume debug messages enabled"

* tag 'pm-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / s2idle: Invoke the ->wake() platform callback earlier

Merge branch 'pm-sleep'

* pm-sleep:
PM / s2idle: Invoke the ->wake() platform callback earlier

Merge tag 'for-4.14/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- a stable fix for the alignment of the event number reported at the
   end of the 'DM_LIST_DEVICES' ioctl.

- a couple stable fixes for the DM crypt target.

- a DM raid health status reporting fix.

* tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: fix incorrect status output at the end of a "recover" process
  dm crypt: reject sector_size feature if device length is not aligned to it
  dm crypt: fix memory leak in crypt_ctr_cipher_old()
  dm ioctl: fix alignment of event number in the device list

dm raid: fix incorrect status output at the end of a "recover" process

There are three important fields that indicate the overall health and
status of an array: dev_health, sync_ratio, and sync_action.  They tell
us the condition of the devices in the array, and the degree to which
the array is synchronized.

This commit fixes a condition that is reported incorrectly.  When a member
of the array is being rebuilt or a new device is added, the "recover"
process is used to synchronize it with the rest of the array.  When the
process is complete, but the sync thread hasn't yet been reaped, it is
possible for the state of MD to be:
mddev->recovery = [ MD_RECOVERY_RUNNING MD_RECOVERY_RECOVER MD_RECOVERY_DONE ]
curr_resync_completed = <max dev size> (but not MaxSector)
and all rdevs to be In_sync.
This causes the 'array_in_sync' output parameter that is passed to
rs_get_progress() to be computed incorrectly and reported as 'false' --
or not in-sync.  This in turn causes the dev_health status characters to
be reported as all 'a', rather than the proper 'A'.

This can cause erroneous output for several seconds at a time when tools
will want to be checking the condition due to events that are raised at
the end of a sync process.  Fix this by properly calculating the
'array_in_sync' return parameter in rs_get_progress().

Also, remove an unnecessary intermediate 'recovery_cp' variable in
rs_get_progress().

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Merge tag 'sound-4.14-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes, mostly with stable ones:

- X32 ABI fix for PCM; likely not so many people suffer from it, but
   still better to fix

- Two minor kernel warning fixes on USB audio devices spotted by
   syzkaller

- Regression fix of echoaudio due to its inconsistent dimension

- Fix for HBR support on Intel DP audio, on some recent chips

- USB-audio quirk for yet another Plantronics devices

- Fix for potential double-fetch in ASIHPI FIFO queue"

* tag 'sound-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usx2y: Suppress kernel warning at page allocation failures
  Revert "ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members"
  ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor
  ALSA: pcm: Fix structure definition for X32 ABI
  ALSA: usb-audio: Add sample rate quirk for Plantronics C310/C520-M
  ALSA: hda - program ICT bits to support HBR audio
  ALSA: asihpi: fix a potential double-fetch bug when copying puhm
  ALSA: compress: Remove unused variable

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID subsystem fixes from Jiri Kosina:

- buffer management size fix for i2c-hid driver, from Adrian Salido

- tool ID regression fixes for Wacom driver from Jason Gerecke

- a few small assorted fixes and a few device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  Revert "HID: multitouch: Support ALPS PTP stick with pid 0x120A"
  HID: hidraw: fix power sequence when closing device
  HID: wacom: Always increment hdev refcount within wacom_get_hdev_data
  HID: wacom: generic: Clear ABS_MISC when tool leaves proximity
  HID: wacom: generic: Send MSC_SERIAL and ABS_MISC when leaving prox
  HID: i2c-hid: allocate hid buffers for real worst case
  HID: rmi: Make sure the HID device is opened on resume
  HID: multitouch: Support ALPS PTP stick with pid 0x120A
  HID: multitouch: support buttons and trackpoint on Lenovo X1 Tab Gen2
  HID: wacom: Correct coordinate system of touchring and pen twist
  HID: wacom: Properly report negative values from Intuos Pro 2 Bluetooth
  HID: multitouch: Fix system-control buttons not working
  HID: add multi-input quirk for IDC6680 touchscreen
  HID: wacom: leds: Don't try to control the EKR's read-only LEDs
  HID: wacom: bits shifted too much for 9th and 10th buttons

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Check iwlwifi 9000 reorder buffer out-of-space condition properly,
    from Sara Sharon.

2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov
    Kasiviswanathan.

3) Fix session and tunnel release races in l2tp, from Guillaume Nault
    and Sabrina Dubroca.

4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter.

5) Several mlx5 driver fixes from the Mellanox folks (max flow counters
    cap check, invalid memory access in IPoIB support, etc.)

6) tun_get_user() should bail if skb->len is zero, from Alexander
    Potapenko.

7) Fix RCU lookups in inetpeer, from Eric Dumazet.

8) Fix locking in packet_do_bund().

9) Handle cb->start() error properly in netlink dump code, from Jason
    A. Donenfeld.

10) Handle multicast properly in UDP socket early demux code. From Paolo
    Abeni.

11) Several erspan bug fixes in ip_gre, from Xin Long.

12) Fix use-after-free in socket filter code, in order to handle the
    fact that listener lock is no longer taken during the three-way TCP
    handshake. From Eric Dumazet.

13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov.

14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
  net: 8021q: skip packets if the vlan is down
  bpf: fix bpf_tail_call() x64 JIT
  net: stmmac: dwmac-rk: Add RK3128 GMAC support
  rndis_host: support Novatel Verizon USB730L
  net: rtnetlink: fix info leak in RTM_GETSTATS call
  socket, bpf: fix possible use after free
  mlxsw: spectrum_router: Track RIF of IPIP next hops
  mlxsw: spectrum_router: Move VRF refcounting
  net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'
  net: mvpp2: Fix clock resource by adding an optional bus clock
  r8152: add Linksys USB3GIGV1 id
  l2tp: fix l2tp_eth module loading
  ip_gre: erspan device should keep dst
  ip_gre: set tunnel hlen properly in erspan_tunnel_init
  ip_gre: check packet length and mtu correctly in erspan_xmit
  ip_gre: get key from session_id correctly in erspan_rcv
  tipc: use only positive error codes in messages
  ppp: fix __percpu annotation
  udp: perform source validation for mcast early demux
  IPv4: early demux can return an error code
  ...

net: 8021q: skip packets if the vlan is down

If the vlan is down, free the packet instead of proceeding with other
processing, or counting it as received. If vlan interfaces are used
as slaves for bonding, with arp monitoring for connectivity, if the rx
counter is seen to be incrementing, then the bond device will not
observe that the interface is down.

CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Vishakha Narvekar <Vishakha.Narvekar@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"Our first batch of fixes this release cycle, unfortunately a bit
  noisier than usual. Two major groups stand out:

   - Some pinctril dts/dtsi changes for stm32 due to a new driver being
     merged during the merge window, and this aligns the DT contents
     between the old format and the new. This could arguably be moved to
     the next merge window but it also seemed relatively harmless to
     include now.

   - Amlogic/meson had driver changes merged that required devicetree
     changes to avoid functional/performance regressions. I've already
     asked them to be more careful about this going forward, and making
     sure drivers are compatible with older DTs when they make these
     kind of changes. The platform is actively being upstreamed so
     there's a few things in flight, we've seen this happen before and
     sometimes it's hard to catch in time.

  Besides that there is the usual mix of minor fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: dts: stm32: use right pinctrl compatible for stm32f469
  ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
  ARM: defconfig: update Gemini defconfig
  ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m
  arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
  reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
  ARM: dts: da850-evm: add serial and ethernet aliases
  ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
  ARM: dts: am33xx: Add spi alias to match SOC schematics
  ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
  ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
  ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
  ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
  arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
  arm64: dt marvell: Fix AP806 system controller size
  MAINTAINERS: add Macchiatobin maintainers entry
  ARC: reset: remove the misleading v1 suffix all over
  ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
  ARC: reset: Only build on archs that have IOMEM
  ARM: at91: Replace uses of virt_to_phys with __pa_symbol
  ...

Update James Hogan's email address

Update my imgtec.com and personal email address to my kernel.org one in
a few places as MIPS will soon no longer be part of Imagination
Technologies, and add mappings in .mailcap so get_maintainer.pl reports
the right address.

Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'stm32-dt-fixes-for-v4.14' of git://git./linux/kernel/git/atorgue/stm32 into fixes

STM32 fixes for v4.14:
---------------------

-Fix STMPE1600 bindings for stm32429i-eval board
-Use right compatible for stm32f469 pinctrl. It implies to use
pinctrl dedicated files for F4 SoCs.

* tag 'stm32-dt-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: use right pinctrl compatible for stm32f469
ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64-3' of git://git./linux/kernel/git/khilman/linux-amlogic into fixes

Amlogic 64-bit DT updates for v4.14 (round 3)
- updates for new MMC driver features/fixes
- support high-speed modes

* tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode
  ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes
  ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes
  ARM64: dts: meson-gxl: libretech-cc: enable high speed modes
  ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times
  ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times
  ARM64: dts: meson: add mmc clk gate pins
  ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
  ARM64: dts: meson-gx: Use correct mmc clock source 0

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"A lot of stuff, sorry about that. A week on a beach, then a bunch of
  time catching up then more time letting it bake in -next. Shan't do
  that again!"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (51 commits)
  include/linux/fs.h: fix comment about struct address_space
  checkpatch: fix ignoring cover-letter logic
  m32r: fix build failure
  lib/ratelimit.c: use deferred printk() version
  kernel/params.c: improve STANDARD_PARAM_DEF readability
  kernel/params.c: fix an overflow in param_attr_show
  kernel/params.c: fix the maximum length in param_get_string
  mm/memory_hotplug: define find_{smallest|biggest}_section_pfn as unsigned long
  mm/memory_hotplug: change pfn_to_section_nr/section_nr_to_pfn macro to inline function
  kernel/kcmp.c: drop branch leftover typo
  memremap: add scheduling point to devm_memremap_pages
  mm, page_alloc: add scheduling point to memmap_init_zone
  mm, memory_hotplug: add scheduling point to __add_pages
  lib/idr.c: fix comment for idr_replace()
  mm: memcontrol: use vmalloc fallback for large kmem memcg arrays
  kernel/sysctl.c: remove duplicate UINT_MAX check on do_proc_douintvec_conv()
  include/linux/bitfield.h: remove 32bit from FIELD_GET comment block
  lib/lz4: make arrays static const, reduces object code size
  exec: binfmt_misc: kill the onstack iname[BINPRM_BUF_SIZE] array
  exec: binfmt_misc: fix race between load_misc_binary() and kill_node()
  ...

Merge branch 'fixes-v4.14-rc4' of git://git./linux/kernel/git/jmorris/linux-security

Pull smack fix from James Morris:
"It fixes a bug in xattr_getsecurity() where security_release_secctx()
  was being called instead of kfree(), which leads to a memory leak in
  the capabilities code. smack_inode_getsecurity is also fixed to behave
  correctly when called from there"

* 'fixes-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  lsm: fix smack_inode_removexattr and xattr_getsecurity memleak

Merge tag 'trace-v4.14-rc1-3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixlets from Steven Rostedt:
"Two updates:

   - A memory fix with left over code from spliting out ftrace_ops and
     function graph tracer, where the function graph tracer could reset
     the trampoline pointer, leaving the old trampoline not to be freed
     (memory leak).

   - The update to Paul's patch that added the unnecessary READ_ONCE().
     This removes the unnecessary READ_ONCE() instead of having to
     rebase the branch to update the patch that added it"

* tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}()
  ftrace: Fix kmemleak in unregister_ftrace_graph

dm crypt: reject sector_size feature if device length is not aligned to it

If a crypt mapping uses optional sector_size feature, additional
restrictions to mapped device segment size must be applied in
constructor, otherwise the device activation will fail later.

Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

ARM: dts: stm32: use right pinctrl compatible for stm32f469

Currently, same stm32f429-pinctrl driver is used for stm32f429 and
stm32f469. As pin map is different between those 2 MCUs,
a stm32f469-pinctrl driver has been recently added.
This patch
-allows to use stm32f469-pinctrl driver for stm32f469 boards
-reworks stm32 devicetree files to fit with stm32f429 / stm32f469

In the same time it fixes an issue when only MACH_STM32F469 flag is
selected in menuconfig.

Fixes: d28bcd53fa90 ("ARM: stm32: Introduce MACH_STM32F469 flag")
Reported-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board

To declare gpio interrupt line for STMPE1600, 2 possibilities are offered:
-use gpio binding (and then the gpiolib interface inside driver)
-use interrupt binding as each gpio-controller are also interrupt controller
on stm32f429.

In STMPE 1600 node both (gpio and interrupt) bindings are defined.
This patch fixes this issue and use only interrupt binding.

Fixes: c04b2e72af8d ("ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL board")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

lsm: fix smack_inode_removexattr and xattr_getsecurity memleak

security_inode_getsecurity() provides the text string value
of a security attribute. It does not provide a "secctx".
The code in xattr_getsecurity() that calls security_inode_getsecurity()
and then calls security_release_secctx() happened to work because
SElinux and Smack treat the attribute and the secctx the same way.
It fails for cap_inode_getsecurity(), because that module has no
secctx that ever needs releasing. It turns out that Smack is the
one that's doing things wrong by not allocating memory when instructed
to do so by the "alloc" parameter.

The fix is simple enough. Change the security_release_secctx() to
kfree() because it isn't a secctx being returned by
security_inode_getsecurity(). Change Smack to allocate the string when
told to do so.

Note: this also fixes memory leaks for LSMs which implement
inode_getsecurity but not release_secctx, such as capabilities.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>

Merge tag 'omap-for-v4.14/fixes-rc3' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.14-rc cycle

Few minor fixes for omaps, mostly just boot time warning fixes:

- Drop undocumented camera binding that got merged during the merge window by
  accident as I applied before Sakari's comments

- Fix soft reset warning for dra7 kexec boot for gpio1 as the optional clocks
  need to be enabled for reset

- Fix dra7 kexec boot clock rate for McASP as the rate is no longer the default
  rate after kexec

- Fix omap3 pandora MMC warning during boot

- Add am33xx SPI alias like we have on other SoCs

- Remove node for non-existing CPSW EMAC Ethernet on am43xx-epos-evm

* tag 'omap-for-v4.14/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
  ARM: dts: am33xx: Add spi alias to match SOC schematics
  ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
  ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
  ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
  ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.14-rockchip-dts64fixes-1' of git://git./linux/kernel/git/mmind/linux-rockchip into fixes

Adding the operating points on rk3368 like they were did not end up well
for the boards as all of them are missing their cpu supplies, the OPPs
actually need to follow the <target min max> format as the regulator is
shared between both clusters and the one rk3368 board I have, somehow also
doesn't like the higher opps at all - all of which I only realized after
I brought my rk3368 board online again, after its bootloader broke.
So we revert that OPP addition for now.

And also two fixes for the mipi dsi controller on rk3399, which was
referencing a clock to high up in the clock-tree so that an intermediate
gate could be disabled inadvertently and also needs a clock for its area
in the general register files of the rk3399 soc.

* tag 'v4.14-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
  arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
  Revert "arm64: dts: rockchip: Add basic cpu frequencies for RK3368"

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'mvebu-fixes-4.14-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 4.14 (part 1)

Update MAINTAINERS for the Macchiatobin board (Armada 8K based)
Fix AP806 system controller size on Armada 7K/8K

* tag 'mvebu-fixes-4.14-1' of git://git.infradead.org/linux-mvebu:
arm64: dt marvell: Fix AP806 system controller size
MAINTAINERS: add Macchiatobin maintainers entry

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'reset-fixes-for-4.14' of git://git.pengutronix.de/git/pza/linux into fixes

Reset controller fixes for v4.14

- Remove misleading HSDK v1 suffix, as there is no v2 planned
- Add missing DT binding documentation for HSDK reset driver
- Fix HSDK reset driver dependencies

* tag 'reset-fixes-for-4.14' of git://git.pengutronix.de/git/pza/linux:
  reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
  ARC: reset: remove the misleading v1 suffix all over
  ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
  ARC: reset: Only build on archs that have IOMEM

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-fixes-for-v4.14' of git://git./linux/kernel/git/nsekhar/linux-davinci into fixes

A fix for random ethernet mac address problem
on DA850 EVM.

* tag 'davinci-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: add serial and ethernet aliases

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-fixes' of git://git./linux/kernel/git/nferre/linux-at91 into fixes

Fixes for 4.14:
- three DT fixes for the newly introduced sama5d27_som1_ek board
- one treewide modification that didn't touch this new PM code: we
  synchronize now to be coherent with the other ARM platforms

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: Replace uses of virt_to_phys with __pa_symbol
  ARM: dts: at91: sama5d27_som1_ek: fix USB host vbus
  ARM: dts: at91: sama5d27_som1_ek: fix typos
  ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USB

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: defconfig: update Gemini defconfig

This updates the Gemini defconfig with drivers merged
for v4.13 or v4.14:
- ATA driver is merged
- DMA driver is merged
- RTC driver gets selected from default Kconfig

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m

It is no longer possible to load this at runtime, so let's
change the few remaining users to have it built-in all
the time.

arch/arm/configs/zeus_defconfig:115:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE
arch/arm/configs/viper_defconfig:116:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE
arch/arm/configs/pxa_defconfig:474:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE

Reported-by: kernelci.org bot <bot@kernelci.org>
Fixes: 6104c37094e7 ("fbcon: Make fbcon a built-time depency for fbdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

include/linux/fs.h: fix comment about struct address_space

Before commit 9c5d760b8d22 ("mm: split gfp_mask and mapping flags into
separate fields") the private_* fields of struct adrress_space were
grouped together and using "ditto" in comments describing the last
fields was correct.

With introduction of gpf_mask between private_lock and private_list
"ditto" references the wrong description.

Fix it by using the elaborate description.

Link: http://lkml.kernel.org/r/1507009987-8746-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix ignoring cover-letter logic

Currently running checkpatch on a directory with a cover-letter.patch
file reports the following error:

  -----------------------------------------
  patches/smp-v2/v2-0000-cover-letter.patch
  -----------------------------------------

  ERROR: Does not appear to be a unified-diff format patch

The logic to suppress the unified-diff check for cover letters is there
but is checking $file instead of $filename.  Fix the variable to use the
correct one.

Link: http://lkml.kernel.org/r/20170909090406.31523-1-shorne@gmail.com
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m32r: fix build failure

The allmodconfig build of m32r is failing with the error:

  lib/mpi/mpih-div.o: In function 'mpihelp_divrem':
  mpih-div.c:(.text+0x40): undefined reference to 'abort'
  mpih-div.c:(.text+0x40): relocation truncated to fit:
R_M32R_26_PCREL_RELA against undefined symbol 'abort'

The function 'abort' was never defined for the m32r architecture.

Create 'abort' as is done in other arch like 'arm' and 'unicore32'.

Link: http://lkml.kernel.org/r/1506727220-6108-1-git-send-email-sudip.mukherjee@codethink.co.uk
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/ratelimit.c: use deferred printk() version

printk_ratelimit() invokes ___ratelimit() which may invoke a normal
printk() (pr_warn() in this particular case) to warn about suppressed
output.  Given that printk_ratelimit() may be called from anywhere, that
pr_warn() is dangerous - it may end up deadlocking the system.  Fix
___ratelimit() by using deferred printk().

Sasha reported the following lockdep error:

: Unregister pv shared memory for cpu 8
: select_fallback_rq: 3 callbacks suppressed
: process 8583 (trinity-c78) no longer affine to cpu8
:
: ======================================================
: WARNING: possible circular locking dependency detected
: 4.14.0-rc2-next-20170927+ #252 Not tainted
: ------------------------------------------------------
: migration/8/62 is trying to acquire lock:
: (&port_lock_key){-.-.}, at: serial8250_console_write()
:
: but task is already holding lock:
: (&rq->lock){-.-.}, at: sched_cpu_dying()
:
: which lock already depends on the new lock.
:
:
: the existing dependency chain (in reverse order) is:
:
: -> #3 (&rq->lock){-.-.}:
: __lock_acquire()
: lock_acquire()
: _raw_spin_lock()
: task_fork_fair()
: sched_fork()
: copy_process.part.31()
: _do_fork()
: kernel_thread()
: rest_init()
: start_kernel()
: x86_64_start_reservations()
: x86_64_start_kernel()
: verify_cpu()
:
: -> #2 (&p->pi_lock){-.-.}:
: __lock_acquire()
: lock_acquire()
: _raw_spin_lock_irqsave()
: try_to_wake_up()
: default_wake_function()
: woken_wake_function()
: __wake_up_common()
: __wake_up_common_lock()
: __wake_up()
: tty_wakeup()
: tty_port_default_wakeup()
: tty_port_tty_wakeup()
: uart_write_wakeup()
: serial8250_tx_chars()
: serial8250_handle_irq.part.25()
: serial8250_default_handle_irq()
: serial8250_interrupt()
: __handle_irq_event_percpu()
: handle_irq_event_percpu()
: handle_irq_event()
: handle_level_irq()
: handle_irq()
: do_IRQ()
: ret_from_intr()
: native_safe_halt()
: default_idle()
: arch_cpu_idle()
: default_idle_call()
: do_idle()
: cpu_startup_entry()
: rest_init()
: start_kernel()
: x86_64_start_reservations()
: x86_64_start_kernel()
: verify_cpu()
:
: -> #1 (&tty->write_wait){-.-.}:
: __lock_acquire()
: lock_acquire()
: _raw_spin_lock_irqsave()
: __wake_up_common_lock()
: __wake_up()
: tty_wakeup()
: tty_port_default_wakeup()
: tty_port_tty_wakeup()
: uart_write_wakeup()
: serial8250_tx_chars()
: serial8250_handle_irq.part.25()
: serial8250_default_handle_irq()
: serial8250_interrupt()
: __handle_irq_event_percpu()
: handle_irq_event_percpu()
: handle_irq_event()
: handle_level_irq()
: handle_irq()
: do_IRQ()
: ret_from_intr()
: native_safe_halt()
: default_idle()
: arch_cpu_idle()
: default_idle_call()
: do_idle()
: cpu_startup_entry()
: rest_init()
: start_kernel()
: x86_64_start_reservations()
: x86_64_start_kernel()
: verify_cpu()
:
: -> #0 (&port_lock_key){-.-.}:
: check_prev_add()
: __lock_acquire()
: lock_acquire()
: _raw_spin_lock_irqsave()
: serial8250_console_write()
: univ8250_console_write()
: console_unlock()
: vprintk_emit()
: vprintk_default()
: vprintk_func()
: printk()
: ___ratelimit()
: __printk_ratelimit()
: select_fallback_rq()
: sched_cpu_dying()
: cpuhp_invoke_callback()
: take_cpu_down()
: multi_cpu_stop()
: cpu_stopper_thread()
: smpboot_thread_fn()
: kthread()
: ret_from_fork()
:
: other info that might help us debug this:
:
: Chain exists of:
:   &port_lock_key --> &p->pi_lock --> &rq->lock
:
:  Possible unsafe locking scenario:
:
:        CPU0                    CPU1
:        ----                    ----
:   lock(&rq->lock);
:                                lock(&p->pi_lock);
:                                lock(&rq->lock);
:   lock(&port_lock_key);
:
:  *** DEADLOCK ***
:
: 4 locks held by migration/8/62:
: #0: (&p->pi_lock){-.-.}, at: sched_cpu_dying()
: #1: (&rq->lock){-.-.}, at: sched_cpu_dying()
: #2: (printk_ratelimit_state.lock){....}, at: ___ratelimit()
: #3: (console_lock){+.+.}, at: vprintk_emit()
:
: stack backtrace:
: CPU: 8 PID: 62 Comm: migration/8 Not tainted 4.14.0-rc2-next-20170927+ #252
: Call Trace:
: dump_stack()
: print_circular_bug()
: check_prev_add()
: ? add_lock_to_list.isra.26()
: ? check_usage()
: ? kvm_clock_read()
: ? kvm_sched_clock_read()
: ? sched_clock()
: ? check_preemption_disabled()
: __lock_acquire()
: ? __lock_acquire()
: ? add_lock_to_list.isra.26()
: ? debug_check_no_locks_freed()
: ? memcpy()
: lock_acquire()
: ? serial8250_console_write()
: _raw_spin_lock_irqsave()
: ? serial8250_console_write()
: serial8250_console_write()
: ? serial8250_start_tx()
: ? lock_acquire()
: ? memcpy()
: univ8250_console_write()
: console_unlock()
: ? __down_trylock_console_sem()
: vprintk_emit()
: vprintk_default()
: vprintk_func()
: printk()
: ? show_regs_print_info()
: ? lock_acquire()
: ___ratelimit()
: __printk_ratelimit()
: select_fallback_rq()
: sched_cpu_dying()
: ? sched_cpu_starting()
: ? rcutree_dying_cpu()
: ? sched_cpu_starting()
: cpuhp_invoke_callback()
: ? cpu_disable_common()
: take_cpu_down()
: ? trace_hardirqs_off_caller()
: ? cpuhp_invoke_callback()
: multi_cpu_stop()
: ? __this_cpu_preempt_check()
: ? cpu_stop_queue_work()
: cpu_stopper_thread()
: ? cpu_stop_create()
: smpboot_thread_fn()
: ? sort_range()
: ? schedule()
: ? __kthread_parkme()
: kthread()
: ? sort_range()
: ? kthread_create_on_node()
: ret_from_fork()
: process 9121 (trinity-c78) no longer affine to cpu8
: smpboot: CPU 8 is now offline

Link: http://lkml.kernel.org/r/20170928120405.18273-1-sergey.senozhatsky@gmail.com
Fixes: 6b1d174b0c27b ("ratelimit: extend to print suppressed messages on release")
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Borislav Petkov <bp@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/params.c: improve STANDARD_PARAM_DEF readability

Align the parameters passed to STANDARD_PARAM_DEF for clarity.

Link: http://lkml.kernel.org/r/20170928162728.756143cc@endymion
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/params.c: fix an overflow in param_attr_show

Function param_attr_show could overflow the buffer it is operating on.

The buffer size is PAGE_SIZE, and the string returned by
attribute->param->ops->get is generated by scnprintf(buffer, PAGE_SIZE,
...) so it could be PAGE_SIZE - 1 long, with the terminating '\0' at the
very end of the buffer. Calling strcat(..., "\n") on this isn't safe, as
the '\0' will be replaced by '\n' (OK) and then another '\0' will be added
past the end of the buffer (not OK.)

Simply add the trailing '\n' when writing the attribute contents to the
buffer originally. This is safe, and also faster.

Credits to Teradata for discovering this issue.

Link: http://lkml.kernel.org/r/20170928162602.60c379c7@endymion
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/params.c: fix the maximum length in param_get_string

The length parameter of strlcpy() is supposed to reflect the size of the
target buffer, not of the source string. Harmless in this case as the
buffer is PAGE_SIZE long and the source string is always much shorter than
this, but conceptually wrong, so let's fix it.

Link: http://lkml.kernel.org/r/20170928162515.24846b4f@endymion
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: define find_{smallest|biggest}_section_pfn as unsigned long

find_{smallest|biggest}_section_pfn()s find the smallest/biggest section
and return the pfn of the section. But the functions are defined as int.
So the functions always return 0x00000000 - 0xffffffff. It means if
memory address is over 16TB, the functions does not work correctly.

To handle 64 bit value, the patch defines
find_{smallest|biggest}_section_pfn() as unsigned long.

Fixes: 815121d2b5cd ("memory_hotplug: clear zone when removing the memory")
Link: http://lkml.kernel.org/r/d9d5593a-d0a4-c4be-ab08-493df59a85c6@gmail.com
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: change pfn_to_section_nr/section_nr_to_pfn macro to inline function

pfn_to_section_nr() and section_nr_to_pfn() are defined as macro.
pfn_to_section_nr() has no issue even if it is defined as macro.  But
section_nr_to_pfn() has overflow issue if sec is defined as int.

section_nr_to_pfn() just shifts sec by PFN_SECTION_SHIFT.  If sec is
defined as unsigned long, section_nr_to_pfn() returns pfn as 64 bit value.
But if sec is defined as int, section_nr_to_pfn() returns pfn as 32 bit
value.

__remove_section() calculates start_pfn using section_nr_to_pfn() and
scn_nr defined as int.  So if hot-removed memory address is over 16TB,
overflow issue occurs and section_nr_to_pfn() does not calculate correct
pfn.

To make callers use proper arg, the patch changes the macros to inline
functions.

Fixes: 815121d2b5cd ("memory_hotplug: clear zone when removing the memory")
Link: http://lkml.kernel.org/r/e643a387-e573-6bbf-d418-c60c8ee3d15e@gmail.com
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/kcmp.c: drop branch leftover typo

The else branch been left over and escaped the source code refresh. Not
a problem but better clean it up.

Fixes: 0791e3644e5e ("kcmp: add KCMP_EPOLL_TFD mode to compare epoll target files")
Link: http://lkml.kernel.org/r/20170917165838.GA1887@uranus.lan
Reported-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memremap: add scheduling point to devm_memremap_pages

devm_memremap_pages is initializing struct pages in for_each_device_pfn
and that can take quite some time.  We have even seen a soft lockup
triggering on a non preemptive kernel

  NMI watchdog: BUG: soft lockup - CPU#61 stuck for 22s! [kworker/u641:11:1808]
  [...]
  RIP: 0010:[<ffffffff8118b6b7>]  [<ffffffff8118b6b7>] devm_memremap_pages+0x327/0x430
  [...]
  Call Trace:
    pmem_attach_disk+0x2fd/0x3f0 [nd_pmem]
    nvdimm_bus_probe+0x64/0x110 [libnvdimm]
    driver_probe_device+0x1f7/0x420
    bus_for_each_drv+0x52/0x80
    __device_attach+0xb0/0x130
    bus_probe_device+0x87/0xa0
    device_add+0x3fc/0x5f0
    nd_async_device_register+0xe/0x40 [libnvdimm]
    async_run_entry_fn+0x43/0x150
    process_one_work+0x14e/0x410
    worker_thread+0x116/0x490
    kthread+0xc7/0xe0
    ret_from_fork+0x3f/0x70

fix this by adding cond_resched every 1024 pages.

Link: http://lkml.kernel.org/r/20170918121410.24466-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Dan Williams <dan.j.williams@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: add scheduling point to memmap_init_zone

memmap_init_zone gets a pfn range to initialize and it can be really
large resulting in a soft lockup on non-preemptible kernels

  NMI watchdog: BUG: soft lockup - CPU#31 stuck for 23s! [kworker/u642:5:1720]
  [...]
  task: ffff88ecd7e902c0 ti: ffff88eca4e50000 task.ti: ffff88eca4e50000
  RIP: move_pfn_range_to_zone+0x185/0x1d0
  [...]
  Call Trace:
    devm_memremap_pages+0x2c7/0x430
    pmem_attach_disk+0x2fd/0x3f0 [nd_pmem]
    nvdimm_bus_probe+0x64/0x110 [libnvdimm]
    driver_probe_device+0x1f7/0x420
    bus_for_each_drv+0x52/0x80
    __device_attach+0xb0/0x130
    bus_probe_device+0x87/0xa0
    device_add+0x3fc/0x5f0
    nd_async_device_register+0xe/0x40 [libnvdimm]
    async_run_entry_fn+0x43/0x150
    process_one_work+0x14e/0x410
    worker_thread+0x116/0x490
    kthread+0xc7/0xe0
    ret_from_fork+0x3f/0x70

Fix this by adding a scheduling point once per page block.

Link: http://lkml.kernel.org/r/20170918121410.24466-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Dan Williams <dan.j.williams@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memory_hotplug: add scheduling point to __add_pages

Patch series "mm, memory_hotplug: fix few soft lockups in memory
hotadd".

Johannes has noticed few soft lockups when adding a large nvdimm device.
All of them were caused by a long loop without any explicit cond_resched
which is a problem for !PREEMPT kernels.

The fix is quite straightforward.  Just make sure that cond_resched gets
called from time to time.

This patch (of 3):

__add_pages gets a pfn range to add and there is no upper bound for a
single call.  This is usually a memory block aligned size for the
regular memory hotplug - smaller sizes are usual for memory balloning
drivers, or the whole NUMA node for physical memory online.  There is no
explicit scheduling point in that code path though.

This can lead to long latencies while __add_pages is executed and we
have even seen a soft lockup report during nvdimm initialization with
!PREEMPT kernel

  NMI watchdog: BUG: soft lockup - CPU#11 stuck for 23s! [kworker/u641:3:832]
  [...]
  Workqueue: events_unbound async_run_entry_fn
  task: ffff881809270f40 ti: ffff881809274000 task.ti: ffff881809274000
  RIP: _raw_spin_unlock_irqrestore+0x11/0x20
  RSP: 0018:ffff881809277b10  EFLAGS: 00000286
  [...]
  Call Trace:
    sparse_add_one_section+0x13d/0x18e
    __add_pages+0x10a/0x1d0
    arch_add_memory+0x4a/0xc0
    devm_memremap_pages+0x29d/0x430
    pmem_attach_disk+0x2fd/0x3f0 [nd_pmem]
    nvdimm_bus_probe+0x64/0x110 [libnvdimm]
    driver_probe_device+0x1f7/0x420
    bus_for_each_drv+0x52/0x80
    __device_attach+0xb0/0x130
    bus_probe_device+0x87/0xa0
    device_add+0x3fc/0x5f0
    nd_async_device_register+0xe/0x40 [libnvdimm]
    async_run_entry_fn+0x43/0x150
    process_one_work+0x14e/0x410
    worker_thread+0x116/0x490
    kthread+0xc7/0xe0
    ret_from_fork+0x3f/0x70
  DWARF2 unwinder stuck at ret_from_fork+0x3f/0x70

Fix this by adding cond_resched once per each memory section in the
given pfn range.  Each section is constant amount of work which itself
is not too expensive but many of them will just add up.

Link: http://lkml.kernel.org/r/20170918121410.24466-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Dan Williams <dan.j.williams@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/idr.c: fix comment for idr_replace()

idr_replace() returns the old value on success, not 0.

Link: http://lkml.kernel.org/r/20170918162642.37511-1-ebiggers3@gmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: use vmalloc fallback for large kmem memcg arrays

For quick per-memcg indexing, slab caches and list_lru structures
maintain linear arrays of descriptors.  As the number of concurrent
memory cgroups in the system goes up, this requires large contiguous
allocations (8k cgroups = order-5, 16k cgroups = order-6 etc.) for every
existing slab cache and list_lru, which can easily fail on loaded
systems.  E.g.:

  mkdir: page allocation failure: order:5, mode:0x14040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
  CPU: 1 PID: 6399 Comm: mkdir Not tainted 4.13.0-mm1-00065-g720bbe532b7c-dirty #481
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
  Call Trace:
   ? __alloc_pages_direct_compact+0x4c/0x110
   __alloc_pages_nodemask+0xf50/0x1430
   alloc_pages_current+0x60/0xc0
   kmalloc_order_trace+0x29/0x1b0
   __kmalloc+0x1f4/0x320
   memcg_update_all_list_lrus+0xca/0x2e0
   mem_cgroup_css_alloc+0x612/0x670
   cgroup_apply_control_enable+0x19e/0x360
   cgroup_mkdir+0x322/0x490
   kernfs_iop_mkdir+0x55/0x80
   vfs_mkdir+0xd0/0x120
   SyS_mkdirat+0x6c/0xe0
   SyS_mkdir+0x14/0x20
   entry_SYSCALL_64_fastpath+0x18/0xad
  Mem-Info:
  active_anon:2965 inactive_anon:19 isolated_anon:0
   active_file:100270 inactive_file:98846 isolated_file:0
   unevictable:0 dirty:0 writeback:0 unstable:0
   slab_reclaimable:7328 slab_unreclaimable:16402
   mapped:771 shmem:52 pagetables:278 bounce:0
   free:13718 free_pcp:0 free_cma:0

This output is from an artificial reproducer, but we have repeatedly
observed order-7 failures in production in the Facebook fleet.  These
systems become useless as they cannot run more jobs, even though there
is plenty of memory to allocate 128 individual pages.

Use kvmalloc and kvzalloc to fall back to vmalloc space if these arrays
prove too large for allocating them physically contiguous.

Link: http://lkml.kernel.org/r/20170918184919.20644-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sysctl.c: remove duplicate UINT_MAX check on do_proc_douintvec_conv()

do_proc_douintvec_conv() has two UINT_MAX checks, we can remove one.
This has no functional changes other than fixing a compiler warning:

kernel/sysctl.c:2190]: (warning) Identical condition '*lvalp>UINT_MAX', second condition is always false

Fixes: 4f2fec00afa60 ("sysctl: simplify unsigned int support")
Link: http://lkml.kernel.org/r/20170919072918.12066-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: David Binderman <dcb314@hotmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/bitfield.h: remove 32bit from FIELD_GET comment block

I do not see anything that restricts this macro to 32 bit width.

Link: http://lkml.kernel.org/r/1505921975-23379-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lz4: make arrays static const, reduces object code size

Don't populate the read-only arrays dec32table and dec64table on the
stack, instead make them both static const.  Makes the object code
smaller by over 10K bytes:

  Before:
     text    data     bss     dec     hex filename
    31500       0       0   31500    7b0c lib/lz4/lz4_decompress.o

  After:
     text    data     bss     dec     hex filename
    20237     176       0   20413    4fbd lib/lz4/lz4_decompress.o

(gcc version 7.2.0 x86_64)

Link: http://lkml.kernel.org/r/20170921221939.20820-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: binfmt_misc: kill the onstack iname[BINPRM_BUF_SIZE] array

After the previous change "fmt" can't go away, we can kill
iname/iname_addr and use fmt->interpreter.

Link: http://lkml.kernel.org/r/20170922143653.GA17232@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ben Woodard <woodard@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jim Foraker <foraker1@llnl.gov>
Cc: <tdhooge@llnl.gov>
Cc: Travis Gummels <tgummels@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: binfmt_misc: fix race between load_misc_binary() and kill_node()

load_misc_binary() makes a local copy of fmt->interpreter under
entries_lock to avoid the race with kill_node() but this is not enough;
the whole Node can be freed after we drop entries_lock, not only the
->interpreter string.

Add dget/dput(fmt->dentry) to ensure bm_evict_inode() can't destroy/free
this Node.

Link: http://lkml.kernel.org/r/20170922143650.GA17227@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ben Woodard <woodard@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jim Foraker <foraker1@llnl.gov>
Cc: Travis Gummels <tgummels@redhat.com>
Cc: <tdhooge@llnl.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: binfmt_misc: remove the confusing e->interp_file != NULL checks

If MISC_FMT_OPEN_FILE flag is set e->interp_file must be valid or we
have a bug which should not be silently ignored.

Link: http://lkml.kernel.org/r/20170922143647.GA17222@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ben Woodard <woodard@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jim Foraker <foraker1@llnl.gov>
Cc: <tdhooge@llnl.gov>
Cc: Travis Gummels <tgummels@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: binfmt_misc: shift filp_close(interp_file) from kill_node() to bm_evict_inode()

To ensure that load_misc_binary() can't use the partially destroyed
Node, see also the next patch.

The current logic looks wrong in any case, once we close interp_file it
doesn't make any sense to delay kfree(inode->i_private), this Node is no
longer valid. Even if the MISC_FMT_OPEN_FILE/interp_file checks were
not racy (they are), load_misc_binary() should not try to reopen
->interpreter if MISC_FMT_OPEN_FILE is set but ->interp_file is NULL.

And I can't understand why do we use filp_close(), not fput().

Link: http://lkml.kernel.org/r/20170922143644.GA17216@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ben Woodard <woodard@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jim Foraker <foraker1@llnl.gov>
Cc: <tdhooge@llnl.gov>
Cc: Travis Gummels <tgummels@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: binfmt_misc: don't nullify Node->dentry in kill_node()

kill_node() nullifies/checks Node->dentry to avoid double free.  This
complicates the next changes and this is very confusing:

- we do not need to check dentry != NULL under entries_lock,
   kill_node() is always called under inode_lock(d_inode(root)) and we
   rely on this inode_lock() anyway, without this lock the
   MISC_FMT_OPEN_FILE cleanup could race with itself.

- if kill_inode() was already called and ->dentry == NULL we should not
   even try to close e->interp_file.

We can change bm_entry_write() to simply check !list_empty(list) before
kill_node.  Again, we rely on inode_lock(), in particular it saves us
from the race with bm_status_write(), another caller of kill_node().

Link: http://lkml.kernel.org/r/20170922143641.GA17210@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ben Woodard <woodard@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jim Foraker <foraker1@llnl.gov>
Cc: <tdhooge@llnl.gov>
Cc: Travis Gummels <tgummels@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: load_script: kill the onstack interp[BINPRM_BUF_SIZE] array

Patch series "exec: binfmt_misc: fix use-after-free, kill
iname[BINPRM_BUF_SIZE]".

It looks like this code was always wrong, then commit 948b701a607f
("binfmt_misc: add persistent opened binary handler for containers")
added more problems.

This patch (of 6):

load_script() can simply use i_name instead, it points into bprm->buf[]
and nobody can change this memory until we call prepare_binprm().

The only complication is that we need to also change the signature of
bprm_change_interp() but this change looks good too.

While at it, do whitespace/style cleanups.

NOTE: the real motivation for this change is that people want to
increase BINPRM_BUF_SIZE, we need to change load_misc_binary() too but
this looks more complicated because afaics it is very buggy.

Link: http://lkml.kernel.org/r/20170918163446.GA26793@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Travis Gummels <tgummels@redhat.com>
Cc: Ben Woodard <woodard@redhat.com>
Cc: Jim Foraker <foraker1@llnl.gov>
Cc: <tdhooge@llnl.gov>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: non-cooperative: fix fork use after free

When reading the event from the uffd, we put it on a temporary
fork_event list to detect if we can still access it after releasing and
retaking the event_wqh.lock.

If fork aborts and removes the event from the fork_event all is fine as
long as we're still in the userfault read context and fork_event head is
still alive.

We've to put the event allocated in the fork kernel stack, back from
fork_event list-head to the event_wqh head, before returning from
userfaultfd_ctx_read, because the fork_event head lifetime is limited to
the userfaultfd_ctx_read stack lifetime.

Forgetting to move the event back to its event_wqh place then results in
__remove_wait_queue(&ctx->event_wqh, &ewq->wq); in
userfaultfd_event_wait_completion to remove it from a head that has been
already freed from the reader stack.

This could only happen if resolve_userfault_fork failed (for example if
there are no file descriptors available to allocate the fork uffd). If
it succeeded it was put back correctly.

Furthermore, after find_userfault_evt receives a fork event, the forked
userfault context in fork_nctx and uwq->msg.arg.reserved.reserved1 can
be released by the fork thread as soon as the event_wqh.lock is
released. Taking a reference on the fork_nctx before dropping the lock
prevents an use after free in resolve_userfault_fork().

If the fork side aborted and it already released everything, we still
try to succeed resolve_userfault_fork(), if possible.

Fixes: 893e26e61d04eac9 ("userfaultfd: non-cooperative: Add fork() event")
Link: http://lkml.kernel.org/r/20170920180413.26713-1-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/device-public-memory: fix edge case in _vm_normal_page()

With device public pages at the end of my memory space, I'm getting
output from _vm_normal_page():

  BUG: Bad page map in process migrate_pages  pte:c0800001ffff0d06 pmd:f95d3000
  addr:00007fff89330000 vm_flags:00100073 anon_vma:c0000000fa899320 mapping:          (null) index:7fff8933
  file:          (null) fault:          (null) mmap:          (null) readpage:          (null)
  CPU: 0 PID: 13963 Comm: migrate_pages Tainted: P    B      OE 4.14.0-rc1-wip #155
  Call Trace:
     dump_stack+0xb0/0xf4 (unreliable)
     print_bad_pte+0x28c/0x340
     _vm_normal_page+0xc0/0x140
     zap_pte_range+0x664/0xc10
     unmap_page_range+0x318/0x670
     unmap_vmas+0x74/0xe0
     exit_mmap+0xe8/0x1f0
     mmput+0xac/0x1f0
     do_exit+0x348/0xcd0
     do_group_exit+0x5c/0xf0
     SyS_exit_group+0x1c/0x20
     system_call+0x58/0x6c

The pfn causing this is the very last one.  Correct the bounds check
accordingly.

Fixes: df6ad69838fc ("mm/device-public-memory: device memory cache coherent with CPU")
Link: http://lkml.kernel.org/r/1506092178-20351-1-git-send-email-arbab@linux.vnet.ibm.com
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix data corruption caused by lazyfree page

MADV_FREE clears pte dirty bit and then marks the page lazyfree (clear
SwapBacked).  There is no lock to prevent the page is added to swap
cache between these two steps by page reclaim.  If page reclaim finds
such page, it will simply add the page to swap cache without pageout the
page to swap because the page is marked as clean.  Next time, page fault
will read data from the swap slot which doesn't have the original data,
so we have a data corruption.  To fix issue, we mark the page dirty and
pageout the page.

However, we shouldn't dirty all pages which is clean and in swap cache.
swapin page is swap cache and clean too.  So we only dirty page which is
added into swap cache in page reclaim, which shouldn't be swapin page.
As Minchan suggested, simply dirty the page in add_to_swap can do the
job.

Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages")
Link: http://lkml.kernel.org/r/08c84256b007bf3f63c91d94383bd9eb6fee2daa.1506446061.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Reported-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: avoid marking swap cached page as lazyfree

MADV_FREE clears pte dirty bit and then marks the page lazyfree (clear
SwapBacked).  There is no lock to prevent the page is added to swap
cache between these two steps by page reclaim.  Page reclaim could add
the page to swap cache and unmap the page.  After page reclaim, the page
is added back to lru.  At that time, we probably start draining per-cpu
pagevec and mark the page lazyfree.  So the page could be in a state
with SwapBacked cleared and PG_swapcache set.  Next time there is a
refault in the virtual address, do_swap_page can find the page from swap
cache but the page has PageSwapCache false because SwapBacked isn't set,
so do_swap_page will bail out and do nothing.  The task will keep
running into fault handler.

Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages")
Link: http://lkml.kernel.org/r/6537ef3814398c0073630b03f176263bc81f0902.1506446061.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Reported-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: have filemap_check_and_advance_wb_err clear AS_EIO/AS_ENOSPC

Eryu noticed that he could sometimes get a leftover error reported when
it shouldn't be on fsync with ext2 and non-journalled ext4.

The problem is that writeback_single_inode still uses filemap_fdatawait.
That picks up a previously set AS_EIO flag, which would ordinarily have
been cleared before.

Since we're mostly using this function as a replacement for
filemap_check_errors, have filemap_check_and_advance_wb_err clear AS_EIO
and AS_ENOSPC when reporting an error. That should allow the new
function to better emulate the behavior of the old with respect to these
flags.

Link: http://lkml.kernel.org/r/20170922133331.28812-1-jlayton@kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m32r: define CPU_BIG_ENDIAN

The build of m32r allmodconfig is giving lots of build warnings about:

include/linux/byteorder/big_endian.h:7:2:
warning: #warning inconsistent configuration,
needs CONFIG_CPU_BIG_ENDIAN [-Wcpp]
#warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN

Define CPU_BIG_ENDIAN like the way CPU_LITTLE_ENDIAN is defined.

Link: http://lkml.kernel.org/r/1505678083-10320-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: fix null dereference of handle

In testing I found handle passed to zs_map_object in __zram_bvec_read is
NULL so eh kernel goes oops in pin_object().

The reason is there is no routine to check the slot's freeing after
getting the slot's lock. This patch fixes it.

[minchan@kernel.org: v2]
Link: http://lkml.kernel.org/r/1505887347-10881-1-git-send-email-minchan@kernel.org
Link: http://lkml.kernel.org/r/1505788488-26723-1-git-send-email-minchan@kernel.org
Fixes: 1f7319c74275 ("zram: partial IO refactoring")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix RODATA_TEST failure "rodata_test: test data was not read only"

On powerpc, RODATA_TEST fails with message the following messages:

  Freeing unused kernel memory: 528K
  rodata_test: test data was not read only

This is because GCC allocates it to .data section:

  c0695034 g     O .data 00000004 rodata_test_data

Since commit 056b9d8a7692 ("mm: remove rodata_test_data export, add
pr_fmt"), rodata_test_data is used only inside rodata_test.c By
declaring it static, it gets properly allocated into .rodata section
instead of .data:

  c04df710 l     O .rodata 00000004 rodata_test_data

Fixes: 056b9d8a7692 ("mm: remove rodata_test_data export, add pr_fmt")
Link: http://lkml.kernel.org/r/20170921093729.1080368AC1@po15668-vm-win7.idsi0.si.c-s.fr
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jinbum Park <jinb.park7@gmail.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio: remove global irq spinlocks from the subsystem

Locking of config and doorbell operations should be done only if the
underlying hardware requires it.

This patch removes the global spinlocks from the rapidio subsystem and
moves them to the mport drivers (fsl_rio and tsi721), only to the
necessary places. For example, local config space read and write
operations (lcread/lcwrite) are atomic in all existing drivers, so there
should be no need for locking, while the cread/cwrite operations which
generate maintenance transactions need to be synchronized with a lock.

Later, each driver could chose to use a per-port lock instead of a
global one, or even more granular locking.

Link: http://lkml.kernel.org/r/20170824113023.GD50104@nokia.com
Signed-off-by: Ioan Nicu <ioan.nicu.ext@nokia.com>
Signed-off-by: Frank Kunz <frank.kunz@nokia.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: meminit: mark init_reserved_page as __meminit

The function is called from __meminit context and calls other __meminit
functions but isn't it self mark as such today:

  WARNING: vmlinux.o(.text.unlikely+0x4516): Section mismatch in reference from the function init_reserved_page() to the function .meminit.text:early_pfn_to_nid()
  The function init_reserved_page() references the function __meminit early_pfn_to_nid().
  This is often because init_reserved_page lacks a __meminit annotation or the annotation of early_pfn_to_nid is wrong.

On most compilers, we don't notice this because the function gets
inlined all the time.  Adding __meminit here fixes the harmless warning
for the old versions and is generally the correct annotation.

Link: http://lkml.kernel.org/r/20170915193149.901180-1-arnd@arndb.de
Fixes: 7e18adb4f80b ("mm: meminit: initialise remaining struct pages in parallel with kswapd")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

z3fold: fix stale list handling

Fix the situation when clear_bit() is called for page->private before
the page pointer is actually assigned. While at it, remove work_busy()
check because it is costly and does not give 100% guarantee anyway.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: <Oleksiy.Avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,compaction: serialize waitqueue_active() checks (for real)

Andrea brought to my attention that the L->{L,S} guarantees are
completely bogus for this case. I was looking at the diagram, from the
offending commit, when that _is_ the race, we had the load reordered
already.

What we need is at least S->L semantics, thus simply use
wq_has_sleeper() to serialize the call for good.

Link: http://lkml.kernel.org/r/20170914175313.GB811@linux-80c1.suse
Fixes: 46acef048a6 (mm,compaction: serialize waitqueue_active() checks)
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Andrea Parri <parri.andrea@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

android: binder: drop lru lock in isolate callback

Drop the global lru lock in isolate callback before calling
zap_page_range which calls cond_resched, and re-acquire the global lru
lock before returning. Also change return code to LRU_REMOVED_RETRY.

Use mmput_async when fail to acquire mmap sem in an atomic context.

Fix "BUG: sleeping function called from invalid context"
errors when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.

Also restore mmput_async, which was initially introduced in commit
ec8d7c14ea14 ("mm, oom_reaper: do not mmput synchronously from the oom
reaper context"), and was removed in commit 212925802454 ("mm: oom: let
oom_reap_task and exit_mmap run concurrently").

Link: http://lkml.kernel.org/r/20170914182231.90908-1-sherryy@android.com
Fixes: f2517eb76f1f2 ("android: binder: Add global lru shrinker to binder")
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Kyle Yan <kyan@codeaurora.org>
Acked-by: Arve Hjønnevåg <arve@android.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Martijn Coenen <maco@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Riley Andrews <riandrews@android.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hoeun Ryu <hoeun.ryu@gmail.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: avoid page count check for zone device

Fix for 4.14, zone device page always have an elevated refcount of one
and thus page count sanity check in uncharge_page() is inappropriate for
them.

[mhocko@suse.com: nano-optimize VM_BUG_ON in uncharge_page]
Link: http://lkml.kernel.org/r/20170914190011.5217-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Evgeny Baskakov <ebaskakov@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memcg: remove hotplug locking from try_charge

The following lockdep splat has been noticed during LTP testing

  ======================================================
  WARNING: possible circular locking dependency detected
  4.13.0-rc3-next-20170807 #12 Not tainted
  ------------------------------------------------------
  a.out/4771 is trying to acquire lock:
   (cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff812b4668>] drain_all_stock.part.35+0x18/0x140

  but task is already holding lock:
   (&mm->mmap_sem){++++++}, at: [<ffffffff8106eb35>] __do_page_fault+0x175/0x530

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #3 (&mm->mmap_sem){++++++}:
         lock_acquire+0xc9/0x230
         __might_fault+0x70/0xa0
         _copy_to_user+0x23/0x70
         filldir+0xa7/0x110
         xfs_dir2_sf_getdents.isra.10+0x20c/0x2c0 [xfs]
         xfs_readdir+0x1fa/0x2c0 [xfs]
         xfs_file_readdir+0x30/0x40 [xfs]
         iterate_dir+0x17a/0x1a0
         SyS_getdents+0xb0/0x160
         entry_SYSCALL_64_fastpath+0x1f/0xbe

  -> #2 (&type->i_mutex_dir_key#3){++++++}:
         lock_acquire+0xc9/0x230
         down_read+0x51/0xb0
         lookup_slow+0xde/0x210
         walk_component+0x160/0x250
         link_path_walk+0x1a6/0x610
         path_openat+0xe4/0xd50
         do_filp_open+0x91/0x100
         file_open_name+0xf5/0x130
         filp_open+0x33/0x50
         kernel_read_file_from_path+0x39/0x80
         _request_firmware+0x39f/0x880
         request_firmware_direct+0x37/0x50
         request_microcode_fw+0x64/0xe0
         reload_store+0xf7/0x180
         dev_attr_store+0x18/0x30
         sysfs_kf_write+0x44/0x60
         kernfs_fop_write+0x113/0x1a0
         __vfs_write+0x37/0x170
         vfs_write+0xc7/0x1c0
         SyS_write+0x58/0xc0
         do_syscall_64+0x6c/0x1f0
         return_from_SYSCALL_64+0x0/0x7a

  -> #1 (microcode_mutex){+.+.+.}:
         lock_acquire+0xc9/0x230
         __mutex_lock+0x88/0x960
         mutex_lock_nested+0x1b/0x20
         microcode_init+0xbb/0x208
         do_one_initcall+0x51/0x1a9
         kernel_init_freeable+0x208/0x2a7
         kernel_init+0xe/0x104
         ret_from_fork+0x2a/0x40

  -> #0 (cpu_hotplug_lock.rw_sem){++++++}:
         __lock_acquire+0x153c/0x1550
         lock_acquire+0xc9/0x230
         cpus_read_lock+0x4b/0x90
         drain_all_stock.part.35+0x18/0x140
         try_charge+0x3ab/0x6e0
         mem_cgroup_try_charge+0x7f/0x2c0
         shmem_getpage_gfp+0x25f/0x1050
         shmem_fault+0x96/0x200
         __do_fault+0x1e/0xa0
         __handle_mm_fault+0x9c3/0xe00
         handle_mm_fault+0x16e/0x380
         __do_page_fault+0x24a/0x530
         do_page_fault+0x30/0x80
         page_fault+0x28/0x30

  other info that might help us debug this:

  Chain exists of:
    cpu_hotplug_lock.rw_sem --> &type->i_mutex_dir_key#3 --> &mm->mmap_sem

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(&mm->mmap_sem);
                                 lock(&type->i_mutex_dir_key#3);
                                 lock(&mm->mmap_sem);
    lock(cpu_hotplug_lock.rw_sem);

   *** DEADLOCK ***

  2 locks held by a.out/4771:
   #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff8106eb35>] __do_page_fault+0x175/0x530
   #1:  (percpu_charge_mutex){+.+...}, at: [<ffffffff812b4c97>] try_charge+0x397/0x6e0

The problem is very similar to the one fixed by commit a459eeb7b852
("mm, page_alloc: do not depend on cpu hotplug locks inside the
allocator").  We are taking hotplug locks while we can be sitting on top
of basically arbitrary locks.  This just calls for problems.

We can get rid of {get,put}_online_cpus, fortunately.  We do not have to
be worried about races with memory hotplug because drain_local_stock,
which is called from both the WQ draining and the memory hotplug
contexts, is always operating on the local cpu stock with IRQs disabled.

The only thing to be careful about is that the target memcg doesn't
vanish while we are still in drain_all_stock so take a reference on it.

Link: http://lkml.kernel.org/r/20170913090023.28322-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Artem Savkov <asavkov@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, oom_reaper: skip mm structs with mmu notifiers

Andrea has noticed that the oom_reaper doesn't invalidate the range via
mmu notifiers (mmu_notifier_invalidate_range_start/end) and that can
corrupt the memory of the kvm guest for example.

tlb_flush_mmu_tlbonly already invokes mmu notifiers but that is not
sufficient as per Andrea:

"mmu_notifier_invalidate_range cannot be used in replacement of
  mmu_notifier_invalidate_range_start/end. For KVM
  mmu_notifier_invalidate_range is a noop and rightfully so. A MMU
  notifier implementation has to implement either ->invalidate_range
  method or the invalidate_range_start/end methods, not both. And if you
  implement invalidate_range_start/end like KVM is forced to do, calling
  mmu_notifier_invalidate_range in common code is a noop for KVM.

  For those MMU notifiers that can get away only implementing
  ->invalidate_range, the ->invalidate_range is implicitly called by
  mmu_notifier_invalidate_range_end(). And only those secondary MMUs
  that share the same pagetable with the primary MMU (like AMD iommuv2)
  can get away only implementing ->invalidate_range"

As the callback is allowed to sleep and the implementation is out of
hand of the MM it is safer to simply bail out if there is an mmu
notifier registered.  In order to not fail too early make the
mm_has_notifiers check under the oom_lock and have a little nap before
failing to give the current oom victim some more time to exit.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170913113427.2291-1-mhocko@kernel.org
Fixes: aac453635549 ("mm, oom: introduce oom reaper")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

z3fold: fix potential race in z3fold_reclaim_page

It is possible that on a (partially) unsuccessful page reclaim,
kref_put() called in z3fold_reclaim_page() does not yield page release,
but the page is released shortly afterwards by another thread. Then
z3fold_reclaim_page() would try to list_add() that (released) page again
which is obviously a bug.

To avoid that, spin_lock() has to be taken earlier, before the
kref_put() call mentioned earlier.

Link: http://lkml.kernel.org/r/20170913162937.bfff21c7d12b12a5f47639fd@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: <Oleksiy.Avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: sh7269: remove nonexistent GPIO_PH[0-7] to fix pinctrl registration

Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices.  If enum
values are defined, but never used, pinmux_pins[] contains (zero-filled)
holes.  Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:

    sh-pfc pfc-sh7722: pin 0 already registered
    sh-pfc pfc-sh7722: error during pin registration
    sh-pfc pfc-sh7722: could not register: -22
    sh-pfc: probe of pfc-sh7722 failed with error -22

Remove GPIO_PH[0-7] from the enum to fix this.

Link: http://lkml.kernel.org/r/1505205657-18012-5-git-send-email-geert+renesas@glider.be
Fixes: ef0fa5331a73e479 ("sh: Add pinmux for sh7269")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: sh7264: remove nonexistent GPIO_PH[0-7] to fix pinctrl registration

Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices.  If enum
values are defined, but never used, pinmux_pins[] contains (zero-filled)
holes.  Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:

    sh-pfc pfc-sh7722: pin 0 already registered
    sh-pfc pfc-sh7722: error during pin registration
    sh-pfc pfc-sh7722: could not register: -22
    sh-pfc: probe of pfc-sh7722 failed with error -22

Remove GPIO_PH[0-7] from the enum to fix this.

Link: http://lkml.kernel.org/r/1505205657-18012-4-git-send-email-geert+renesas@glider.be
Fixes: 41797f75486d8ca3 ("sh: Add pinmux for sh7264")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: sh7757: remove nonexistent GPIO_PT[JLNQ]7_RESV to fix pinctrl registration

Commit 3810e96056ff ("sh: modify pinmux for SH7757 2nd cut") renamed
GPIO_PT[JLNQ]7 to GPIO_PT[JLNQ]7_RESV, and removed the existing users
from the pinmux_pins[] array.

However, pinmux_pins[] is initialized through PINMUX_GPIO(), using
designated array initializers, where the GPIO_* enums serve as indices.
Hence entries were not really removed, but replaced by (zero-filled)
holes.  Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:

    sh-pfc pfc-sh7722: pin 0 already registered
    sh-pfc pfc-sh7722: error during pin registration
    sh-pfc pfc-sh7722: could not register: -22
    sh-pfc: probe of pfc-sh7722 failed with error -22

Remove GPIO_PT[JLNQ]7_RESV from the enum to fix this.

Link: http://lkml.kernel.org/r/1505205657-18012-3-git-send-email-geert+renesas@glider.be
Fixes: 3810e96056ffddf6 ("sh: modify pinmux for SH7757 2nd cut")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: sh7722: remove nonexistent GPIO_PTQ7 to fix pinctrl registration

Patch series "sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration",
v2.

Magnus Damm reported that on sh7722/Migo-R, pinctrl registration fails
with:

    sh-pfc pfc-sh7722: pin 0 already registered
    sh-pfc pfc-sh7722: error during pin registration
    sh-pfc pfc-sh7722: could not register: -22
    sh-pfc: probe of pfc-sh7722 failed with error -22

pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices.  Apparently
GPIO_PTQ7 was defined in the enum, but never used.  If enum values are
defined, but never used, pinmux_pins[] contains (zero-filled) holes.
Hence such entries are treated as pin zero, which was registered before,
and pinctrl registration fails.

I can't see how this ever worked, as at the time of commit f5e25ae52fef
("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in
drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and
drivers/pinctrl/core.c already had the check.

Some scripting revealed a few more broken drivers:
  - sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV.
  - sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with
    PINMUX_GPIO().

Patch 1 fixes the issue on sh7722, and was tested.  Patches 3-4 should
fix the issue on the other 3 SoCs, but was untested due to lack of
hardware.

This patch (of 4):

On sh7722/Migo-R, pinctrl registration fails with:

    sh-pfc pfc-sh7722: pin 0 already registered
    sh-pfc pfc-sh7722: error during pin registration
    sh-pfc pfc-sh7722: could not register: -22
    sh-pfc: probe of pfc-sh7722 failed with error -22

pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array
initializers, where the GPIO_* enums serve as indices.  As GPIO_PTQ7 is
defined in the enum, but never used, pinmux_pins[] contains a
(zero-filled) hole.  Hence this entry is treated as pin zero, which was
registered before, and pinctrl registration fails.

According to the datasheet, port PTQ7 does not exist.  Hence remove
GPIO_PTQ7 from the enum to fix this.

Link: http://lkml.kernel.org/r/1505205657-18012-2-git-send-email-geert+renesas@glider.be
Fixes: 8d7b5b0af7e070b9 ("sh: Add sh7722 pinmux code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Magnus Damm <magnus.damm@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb, soft_offline: save compound page order before page migration

This fixes a bug in madvise() where if you'd try to soft offline a
hugepage via madvise(), while walking the address range you'd end up,
using the wrong page offset due to attempting to get the compound order
of a former but presently not compound page, due to dissolving the huge
page (since commit c3114a84f7f9: "mm: hugetlb: soft-offline: dissolve
source hugepage after successful migration").

As a result I ended up with all my free pages except one being offlined.

Link: http://lkml.kernel.org/r/20170912204306.GA12053@gmail.com
Fixes: c3114a84f7f9 ("mm: hugetlb: soft-offline: dissolve source hugepage after successful migration")
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ksm: fix unlocked iteration over vmas in cmp_and_merge_page()

In this place mm is unlocked, so vmas or list may change. Down read
mmap_sem to protect them from modifications.

Link: http://lkml.kernel.org/r/150512788393.10691.8868381099691121308.stgit@localhost.localdomain
Fixes: e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/mm.h: fix typo in VM_MPX definition

There's a typo in recent change of VM_MPX definition.  We want it to be
VM_HIGH_ARCH_4, not VM_HIGH_ARCH_BIT_4.

This bug does cause visible regressions.  In arch_vma_name the vmflags
are tested against VM_MPX.  With the incorrect value of VM_MPX, a number
of vmas (such as the stack) test positive and end up being marked as
"[mpx]" in /proc/N/maps instead of their correct names.

This confuses tools like rr which expect to be able to find familiar
vmas.

Fixes: df3735c5b40f ("x86,mpx: make mpx depend on x86-64 to free up VMA flag")
Link: http://lkml.kernel.org/r/20170918140253.36856-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kyle Huey <me@kylehuey.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/spelling.txt: add more spelling mistakes to spelling.txt

Here are some of the more spelling mistakes and typos that I've found
while fixing up spelling mistakes in kernel error message text over the
past eight weeks.

[akpm@linux-foundation.org: s/|/||/, per Joe]
Link: http://lkml.kernel.org/r/20170919090818.5989-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/params.c: align add_sysfs_param documentation with code

This parameter is named kp, so the documentation should use that.

Fixes: 9b473de87209 ("param: Fix duplicate module prefixes")
Link: http://lkml.kernel.org/r/20170919142656.64aea59e@endymion
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: fix build failures

The build of alpha allmodconfig is giving error:

arch/alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
arch/alpha/include/asm/mmu_context.h:160:2: error:
implicit declaration of function 'task_thread_info';
did you mean 'init_thread_info'? [-Werror=implicit-function-declaration]

The file 'mmu_context.h' needed an extra header file.

Link: http://lkml.kernel.org/r/1505668810-7497-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bpf: fix bpf_tail_call() x64 JIT

- bpf prog_array just like all other types of bpf array accepts 32-bit index.
Clarify that in the comment.
- fix x64 JIT of bpf_tail_call which was incorrectly loading 8 instead of 4 bytes
- tighten corresponding check in the interpreter to stay consistent

The JIT bug can be triggered after introduction of BPF_F_NUMA_NODE flag
in commit 96eabe7a40aa in 4.14. Before that the map_flags would stay zero and
though JIT code is wrong it will check bounds correctly.
Hence two fixes tags. All other JITs don't have this problem.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 96eabe7a40aa ("bpf: Allow selecting numa node during map creation")
Fixes: b52f00e6a715 ("x86: bpf_jit: implement bpf_tail_call() helper")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwmac-rk: Add RK3128 GMAC support

Add constants and callback functions for the dwmac on rk3128 soc.
As can be seen, the base structure is the same, only registers
and the bits in them moved slightly.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rndis_host: support Novatel Verizon USB730L

Treat the ef/04/01 interface class/subclass/protocol combination used
by the Novatel Verizon USB730L (1410:9030) as a possible RNDIS
interface.

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  3
P:  Vendor=1410 ProdID=9030 Rev=03.10
S:  Manufacturer=Novatel Wireless
S:  Product=MiFi USB730L
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I:  If#= 2 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid

Once the network interface is brought up, the user just needs to run a
DHCP client to get IP address and routing setup.

As a side note, other Novatel Verizon USB730L models with the same
vid:pid end up exposing a standard ECM interface which doesn't require
any other kernel update to make it work.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-4.14-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fixlet from Tejun Heo:
"Minor documentation update"

* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
Documentation: core-api: minor workqueue.rst cleanups

Merge branch 'for-4.14-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
"The recent migration code updates assumed that migrations always
  execute from the top to the bottom once and didn't clean up internal
  states after each migration round; however, cgroup_transfer_tasks()
  repeats the inner steps multiple times and the garbage internal states
  from the previous iteration led to OOPS.

  Waiman fixed the bug by reinitializing the relevant states at the end
  of each migration round"

* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Reinit cgroup_taskset structure before cgroup_migrate_execute() returns

net: rtnetlink: fix info leak in RTM_GETSTATS call

When RTM_GETSTATS was added the fields of its header struct were not all
initialized when returning the result thus leaking 4 bytes of information
to user-space per rtnl_fill_statsinfo call, so initialize them now. Thanks
to Alexander Potapenko for the detailed report and bisection.

Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-4.14-fixes' of git://git./linux/kernel/git/tj/percpu

Pull percpu fixes from Tejun Heo:
"Rather important fixes this time.

   - The new percpu area allocator had a subtle bug in how it iterates
     the memory regions and could skip viable areas, which led to
     allocation failures for module static percpu variables. Dennis
     fixed the bug and another non-critical one in stat calculation.

   - Mark noticed that the generic implementations of percpu local
     atomic reads aren't properly protected against irqs and there's a
     (slim) chance for split reads on some 32bit systems. Generic
     implementations are updated to disable irq when read size is larger
     than ulong size. This may have made some 32bit archs which can do
     atomic local 64bit accesses generate sub-optimal code. We need to
     find them out and implement arch-specific overrides"

* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix iteration to prevent skipping over block
  percpu: fix starting offset for chunk statistics traversal
  percpu: make this_cpu_generic_read() atomic w.r.t. interrupts

Merge branch 'for-4.14-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
"Nothing too interesting.

  Arnd's gcc-7 warning fixes that slipped through the cracks for two
  release cycles (my bad), and two minor low level driver updates"

* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: don't ignore result code of ahci_reset_controller()
  ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs
  ata: avoid gcc-7 warning in ata_timing_quantize

Merge tag 'usb-4.14-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 4.14-rc4 to resolved reported
  issues.

  There's a bunch of stuff in here based on the great work Andrey
  Konovalov is doing in fuzzing the USB stack. Lots of bug fixes when
  dealing with corrupted USB descriptors that we've never seen in
  "normal" operation, but is now ensuring the stack is much more
  hardened overall.

  There's also the usual XHCI and gadget driver fixes as well, and a
  build error fix, and a few other minor things, full details in the
  shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (38 commits)
  usb: dwc3: of-simple: Add compatible for Spreadtrum SC9860 platform
  usb: gadget: udc: atmel: set vbus irqflags explicitly
  usb: gadget: ffs: handle I/O completion in-order
  usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
  usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
  usb: gadget: udc: renesas_usb3: Fix return value of usb3_write_pipe()
  usb: gadget: udc: renesas_usb3: fix Pn_RAMMAP.Pn_MPKT value
  usb: gadget: udc: renesas_usb3: fix for no-data control transfer
  USB: dummy-hcd: Fix erroneous synchronization change
  USB: dummy-hcd: fix infinite-loop resubmission bug
  USB: dummy-hcd: fix connection failures (wrong speed)
  USB: cdc-wdm: ignore -EPIPE from GetEncapsulatedResponse
  USB: devio: Don't corrupt user memory
  USB: devio: Prevent integer overflow in proc_do_submiturb()
  USB: g_mass_storage: Fix deadlock when driver is unbound
  USB: gadgetfs: Fix crash caused by inadequate synchronization
  USB: gadgetfs: fix copy_to_user while holding spinlock
  USB: uas: fix bug in handling of alternate settings
  usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
  usb-storage: fix bogus hardware error messages for ATA pass-thru devices
  ...