Tony Ambardar [Mon, 22 Mar 2021 01:06:19 +0000 (18:06 -0700)]
rules: fix device and chain usage for DSCP/MARK targets
Currently, fw3 places all DSCP/MARK target rules into the PREROUTING chain,
and accepts but ignores a src device. This behaviour is impractical for
most common applications (e.g. QOS setup), since rules are applied to all
devices and in all directions.
Fix this generally by honouring src/dest device selection and placing the
rules into the appropriate chain of the mangle table. This code is based
on a proof of concept shared by Jo-Philipp Wich <jo@mein.io>.
Fixes: 12a7cf9db1f9 ("Add support for DSCP matches and target")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Mon, 22 Mar 2021 01:06:18 +0000 (18:06 -0700)]
zone: avoid duplicates in devices list
While resolving zones to devices it's possible to introduce duplicates due
to the presence of aliased interfaces.
Fix this by consolidating the fw3_zone->devices list during creation.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Philip Prindeville [Fri, 19 Feb 2021 20:49:35 +0000 (13:49 -0700)]
firewall3: remove last remaining sprintf()
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Rosen Penev <rosenp@gmail.com>
Jo-Philipp Wich [Sun, 6 Dec 2020 13:56:26 +0000 (14:56 +0100)]
iptables: fix serializing multiple weekdays
Ref: https://bugs.openwrt.org/index.php?getfile=1053
Fixes: FS#1053
Fixes: 427bc12 ("iptables: fix serializing multiple weekdays")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Rui Salvaterra [Sun, 18 Oct 2020 22:28:58 +0000 (23:28 +0100)]
firewall3: fix duplicate defaults section detection
The flag was initialised and tested, but actually never set when a duplicate
section was found.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Daniel Harding [Tue, 27 Oct 2020 06:27:01 +0000 (09:27 +0300)]
ipsets: allow blank/commented lines with loadfile
When loading ipset files using the loadfile option, skip blank lines and
lines that start with '#' (disregarding any leading whitespace).
Signed-off-by: Daniel Harding <dharding@living180.net>
Alexey Dobrovolsky [Sun, 30 Aug 2020 21:10:09 +0000 (00:10 +0300)]
fw3: zones: limit zone names to 11 bytes
As defined in currently used iptables v1.8.4, chain name must be
under 29 chars. Thus, user can only edit 11 chars.
See also the bugreport [0].
[0] https://dev.archive.openwrt.org/ticket/20380
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
[improve commit description, move length calculation information to src]
Signed-off-by: David Bauer <mail@david-bauer.net>
Remi NGUYEN VAN [Sat, 15 Aug 2020 04:50:27 +0000 (13:50 +0900)]
options: fix parsing of boolean attributes
Boolean attributes were parsed the same way as string attributes,
so a value of { "bool_attr": "true" } would be parsed correctly, but
{ "bool_attr": true } (without quotes) was parsed as false.
Fixes FS#3284
Signed-off-by: Remi NGUYEN VAN <remi.nguyenvan+openwrt@gmail.com>
Yousong Zhou [Fri, 24 Jul 2020 04:52:59 +0000 (12:52 +0800)]
zones: apply tcp mss clamping also on ingress path
Fixes FS#3231
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Alin Nastac [Thu, 7 May 2020 11:14:06 +0000 (13:14 +0200)]
redirects: fix segmentation fault
Fixes
9d7f49df47ad ("redurects: add support to define multiple zones for dnat reflection rules")
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Jo-Philipp Wich [Wed, 27 May 2020 20:23:23 +0000 (22:23 +0200)]
treewide: replace unsafe string functions
Replace sprintf(), strncpy() etc. with safer variants that perform bounds
checking on the target buffer. Also rework unsafe `p += sprintf(p, ....)`
code to properly handle error cases.
Ref: http://lists.infradead.org/pipermail/openwrt-devel/2020-May/023363.html
Suggested-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 2 Jun 2020 17:37:09 +0000 (19:37 +0200)]
improve reload logic
- Purge chains in two phases, first flush rules, then delete chains
- Create missing zone user chains during reload
- Keep used chains on reload to avoid removing user rules
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Anton Engelhardt [Fri, 14 Sep 2018 17:31:15 +0000 (19:31 +0200)]
redurects: add support to define multiple zones for dnat reflection rules
Added new config option for redirect, which accepts a list of zones from
which reflection rules shall be created.
Example:
zones: wan lan devices servers
config redirect
...
option target 'DNAT'
option src 'wan'
option dest 'servers'
option proto 'tcp'
option src_dport '443'
option dest_port '443'
option name 'HTTPS'
option reflection_src 'extern'
...
Old behaviour would only add a reflection rule from the servers zone.
By adding a config `option reflection_zones 'lan devices servers'`,
reflection rules will get added for all and only the given zones.
Not setting that option results in the old behaviour of using the
DNAT destination zone for reflection rules.
Tested on x86 master and 18.06.
Signed-off-by: Anton Engelhardt <engelhardt.anton@gmail.com>
[reword commit message, align code style, avoid temporary list,
singular option name]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
WangYanlong [Fri, 13 Mar 2020 12:29:27 +0000 (12:29 +0000)]
firewall3: defaults: fix uci flow_offloading option
Fixes
7cc2a84 ("defaults: robustify flow table detection.")
7cc2a84 made disabling flow_offloading impossible.
This is to fix the buggy behavior.
Signed-off-by: Yanlong Wang <yanlong.wang@naiver.org>
[move variable declaration to the top, remove braces from conditional]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Yousong Zhou [Tue, 3 Mar 2020 06:32:47 +0000 (14:32 +0800)]
rules: fix typo
Fixes
d596f728e9 ("rules: fix UCI context in error reporting")
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Rui Salvaterra [Fri, 24 Jan 2020 15:56:32 +0000 (15:56 +0000)]
defaults: robustify flow table detection.
The flow table detection fails if the respective target module is
built into the kernel, since it's looking for the module itself.
Create a generic helper and instead check for existence of the
FLOWOFFLOAD target in /proc/net/ip_tables_targets.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[slightly reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 22 Nov 2019 17:51:22 +0000 (18:51 +0100)]
utils: persist effective extra_src and extra_dest options in state file
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 22 Nov 2019 17:23:16 +0000 (18:23 +0100)]
zones: fix emitting match rules for zones with only "extra" options
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Mon, 23 Sep 2019 19:16:20 +0000 (21:16 +0200)]
utils: fix resource leak
Fix resource leak in fw3_lock_path in case flock fails
Detected by Coverity in CID
1453962
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jo-Philipp Wich [Wed, 18 Sep 2019 08:31:06 +0000 (10:31 +0200)]
ubus: do not overwrite ipset name attribute
When importing ipset definitions from published ubus data, do not
overwrite the name attribute with an autogenerated string like it
is being done for rules or redirects.
Ref: https://forum.openwrt.org/t/fw3-ipset-procd-objects/44044
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Alin Nastac [Tue, 10 Sep 2019 14:15:13 +0000 (16:15 +0200)]
firewall3: fix typo that affects ICMPv6 rules with numeric icmp_type
Problem can be reproduced with a rule like this:
option src 'wan'
option family 'ipv6'
option proto 'icmp'
option icmp_type '128'
option target 'DROP'
The resulted rule will set --icmpv6-type to 128/255.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Hauke Mehrtens [Sun, 8 Sep 2019 16:28:52 +0000 (18:28 +0200)]
utils: Fix string format message
Fix the format string to match the size_t type, this fixes a build
problem on 64 bit platforms.
Fixes: 4d0c703e750c ("firewall3: Fix some format string problems")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 2 Sep 2019 20:27:35 +0000 (22:27 +0200)]
firewall3: Fix some format string problems
This adds annotations for the format strings to the print functions and
fixes the newly found problems. One of them is a format security
problem.
Coverity: #
1412532
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Alexander Couzens [Fri, 17 May 2019 09:14:46 +0000 (11:14 +0200)]
iptables.c: lock the xtables.lock
When using fw3 together with other applications or scripts a race
conditions might occur. When fw3 is preparing the new tables, another
application can use the executable `iptables` which modifies the
kernel-tables. libxtables will notify this and fails when fw3 is
committing the changes resulting in a failed firewall.
Now waits in a while loop until the lock is gone, activate the lock
itself and applies changes.
To reproduce the bug the following two scripts should run in parrallel,
after a few seconds the latter stop and leaves a broken firewall:
while true; do iptables -N locking; done
and
while [ "$(iptables -w -L OUTPUT | wc -l)" -gt 2 ]; do fw3 reload; done
The following message will appear
Warning: iptc_commit(): Resource temporarily unavailable
and connectivity is gone.
Tested in an LXC and Qemu container.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[fixed waiting for unlock and commit message]
Signed-off-by: Paul Spooren <mail@aparcar.org>
Alexander Couzens [Fri, 17 May 2019 09:14:45 +0000 (11:14 +0200)]
utils: implement fw3_lock_path() & fw3_unlock_path()
To lock a second lock file at the same time, introduce fw3_{un,}lock_path.
fw3_lock_path support the path as parameter in difference to fw3_lock which
only locks the fw3 lock file (/var/run/fw3.lock)
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Kristian Evensen [Mon, 19 Aug 2019 12:45:57 +0000 (14:45 +0200)]
firewall3: ipset: Handle reload_set properly
The reload_set option was added in commit
509e673dab01 ("firewall3:
Improve ipset support"), and the purpose of the option is to control if
a set should be flushed or not on a firewall reload.
In some cases, the option unfortunately does not work properly. I had
fixed the errors locally, but failed to submit a v2 of "Improve ipset
support". This patch contains my local fixes, and after the following
changes are applied then the option (as well as ipset support) works as
at least I expect.
The following errors have been fixed:
* "family" was not written to the state file, causing all sets read from
this file was considered as ipv4. Save family to ensure that sets are
handled correctly on firewall reload.
* The default value of "reload_set" is false, meaning that the
reload-check in "fw3_create_ipsets()" is always true (on reload). A
consequence of this is that new sets are never created on firewall
reload. In order to ensure that new sets are created, only consider
"reload_set" if the set exists. If a set (from configuration) does not
exist, we always want to create it.
* On reload and before "fw3_destroy_ipsets()" are called, we need to
update run_state to ensure that sets are updated correctly. We need to
check if the sets in run_state is found in cfg_state, if not the set
should be destroyed (done by forcing reload_set to true). If the set is
found, then we copy the value of reload_set to the set in run_state so
that the elements are updated as the user expects.
Since we now always copy the value of reload_set from cfg_state, there
is no need to write reload_set to run_state.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Kristian Evensen [Wed, 6 Feb 2019 20:21:51 +0000 (21:21 +0100)]
firewall3: Improve ipset support
This patch is an attempt at improving the ipset support in firewall3.
The following changes have been made:
* The enabled option did not work properly for ipsets, as it was not
checked on create/destroy of a set. After this commit, sets are only
created/destroyed if enabled is set to true.
* Add support for reloading, or recreating, ipsets on firewall reload.
By setting "reload_set" to true, the set will be destroyed and then
re-created when the firewall is reloaded. My use-case for "reload_set"
was to reset sets populated by dnsmasq, without having to restart the
firewall or resort to scripts.
* Add support for the counters and comment extensions. By setting
"counters" or "comment" to true, then counters or comments are added to
the set.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
re-ordered additional variables
dropped enum OPT_COMMENT & OPT_COUNTERS as unused
implemented exponential delay whilst waiting for ipset deletion/creation
fixed delays made firewall unresponsive for too long on reloads
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Kevin Darbyshire-Bryant [Wed, 12 Jun 2019 15:38:39 +0000 (17:38 +0200)]
utils: coverity resource leak warning
solve coverity reported resource leak (socket handle)
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Hans Dedecker [Thu, 6 Dec 2018 14:44:57 +0000 (15:44 +0100)]
zones: add zone identifying local traffic in raw OUTPUT chain
Add zone chains identifying local generated traffic; either by configuring
a loopback device or as subnet a loopback address; in the raw OUTPUT chain
as local generated traffic is passing this chain.
This allows helpers to be used for local generated traffic.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Hauke Mehrtens [Wed, 19 Dec 2018 09:40:07 +0000 (10:40 +0100)]
utils: Free args in __fw3_command_pipe()
args was not freed after leaving this function.
Fixes Coverity issue
1412470 Resource leak
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Hauke Mehrtens [Wed, 19 Dec 2018 09:34:08 +0000 (10:34 +0100)]
options: redirects: Fix possible buffer overflows
This fixes two possible situations where strncpy() produces a not null
terminated buffer.
Coverity IDs:
*
1412247 Buffer not null terminated
*
1412279 Buffer not null terminated
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Thu, 6 Dec 2018 17:03:06 +0000 (18:03 +0100)]
redirects: properly handle src_dport in SNAT rules
In case of SNAT rules the src_dport parameter is used both as a rewrite
parameter as well as a matching parameter which is not the expected
behavior.
The latter is caused by port_redir being set to src_dport in case dest_port
parameter is not.
As this logic is in place to mimic the old shell script based firewall
behavior for DNAT only set port_redir in case the redirect rule is
a DNAT rule.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Mon, 13 Aug 2018 11:58:22 +0000 (13:58 +0200)]
defaults: fix check_kmod() function
Fixes
06fa692 ("defaults: use a generic check_kmod() function")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Joe Holden [Fri, 13 Jul 2018 15:44:39 +0000 (16:44 +0100)]
defaults: use a generic check_kmod() function
Rather than having functions for check_offloading() et al, replace it with a
generic function.
Signed-off-by: Joe Holden <jwh@zorins.co.uk>
Jo-Philipp Wich [Fri, 3 Aug 2018 20:29:59 +0000 (22:29 +0200)]
Add support for DSCP matches and target
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 26 Jul 2018 06:02:01 +0000 (08:02 +0200)]
ubus: avoid dumping interface state with NULL message
Invoking ubus methods with NULL message is not supported anymore, so
make sure that network.interface/dump is called with an empty blob buffer
argument.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Alin Nastac [Thu, 12 Jul 2018 08:36:02 +0000 (10:36 +0200)]
firewall3: make reject types selectable by user
RFC 6092 recommends in section 3.3.1 that an IPv6 CPE must respond to
unsolicited inbound SYNs with an ICMPv6 Destination Unreachable error
code 1 (Communication with destination administratively prohibited).
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Rosen Penev [Thu, 21 Jun 2018 23:09:56 +0000 (16:09 -0700)]
firewall3: Fix GCC8 warnings by replacing sprintf with snprintf
error: ‘%u’ directive writing between 1 and 10 bytes into a region of size
between 7 and 11 [-Werror=format-overflow=]
sprintf(buf, "%u-%u", port->port_min, port->port_max);
^~
note: directive argument in the range [0,
2147483647]
sprintf(buf, "%u-%u", port->port_min, port->port_max);
^~~~~~~
note: ‘sprintf’ output between 4 and 17 bytes into a destination of size
13
sprintf(buf, "%u-%u", port->port_min, port->port_max);
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Jo-Philipp Wich [Sat, 19 May 2018 18:36:44 +0000 (20:36 +0200)]
zones: add interface/subnet bound LOG rules
Emit LOG rules bound to the source/destination device or subnet to match the
same traffic handled by the terminal REJECT/DROP rules.
This fixes superflous logging of unrelated traffic.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 12 Apr 2018 08:51:51 +0000 (10:51 +0200)]
options: treat time strings as UTC times
When parsing user supplied time strings, calculate an UTC time instant by
substracting the current zone offset from the result of mktime(3), then use
gmtime_r(3) to turn the time_t value back into a sanitized time structure.
This ensures that user supplied dates are not interpreted as local time.
Fixes FS#1483.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Pierre Lebleu [Wed, 9 May 2018 07:58:59 +0000 (09:58 +0200)]
helpers: fix the set_helper in the rule structure
The set_helper field has to be set by set_helper and not helper.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Mon, 7 May 2018 14:17:17 +0000 (16:17 +0200)]
helpers.conf: support also tcp in the CT sip helper
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Mon, 7 May 2018 14:17:16 +0000 (16:17 +0200)]
helpers: make the proto field as a list rather than one option
The field proto in the struct fw3_cthelper should be implemented
as a list in order to support multiple protocols.
For example, the helper for SIP should be able to support both
TCP and UDP within only one entry in the config file.
config helper
option name 'sip'
option description 'SIP VoIP connection tracking'
option module 'nf_conntrack_sip'
option family 'any'
option proto 'tcpudp'
option port '5060'
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Felix Fietkau [Thu, 5 Apr 2018 12:44:40 +0000 (14:44 +0200)]
defaults: add support for setting --hw on the xt_FLOWOFFLOAD rule
Enables hardware offload support where supported
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Tue, 20 Mar 2018 20:45:47 +0000 (21:45 +0100)]
helpers.conf: add CT rtsp helper
Add rtsp conntrack helper listening on IPv4 tcp port 554
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jo-Philipp Wich [Tue, 13 Mar 2018 14:54:49 +0000 (15:54 +0100)]
Reword rule comments
Reword various rule comments to be more explicit and also annotate the flow
offloading rule while we're at it.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 13 Mar 2018 14:45:38 +0000 (15:45 +0100)]
defaults: add support for xt_FLOWOFFLOAD rule
Introduce a new defaults section option "flow_offloading" which,
when enabled, causes fw3 to emit a -j FLOWOFFLOAD rule in the
forwarding chain.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sat, 10 Mar 2018 12:45:44 +0000 (13:45 +0100)]
ipsets: add support for specifying entries
Introduce a new list option "entry" which can be used to specify entries
to add to the ipset, e.g.
config ipset
option name test
...
list entry 1.2.3.4,8080
list entry 5.6.7.8,8081
Also introduce a new option "loadfile" which refers to an external file
containing set entries to add, with one item per line.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 2 Mar 2018 10:36:39 +0000 (11:36 +0100)]
iptables: fix possible NULL pointer access on constructing rule masks
Due to a misplaced parenthesis, rule_mask() may try to access
r->target->userspacesize through a r->target NULL pointer.
Fix this problem by correcting the parenthesis placement in the memset
expression, using the originally intented operator precedence.
Spotted in the cz.nic fork of firewall3.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Stijn Tintel [Mon, 26 Feb 2018 22:06:03 +0000 (23:06 +0100)]
zones: allow per-table log control
When enabling logging for a zone, logging is enabled in the filter and
mangle tables. The log rule in the mangle table enables mtu_fix logging,
which has the tendency to flood logs. Allow per-table log control by
making the log boolean a bit field that can be used to enabled logging
in the filter and/or mangle tables.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Jo-Philipp Wich [Mon, 19 Feb 2018 17:16:26 +0000 (18:16 +0100)]
helpers: implement explicit CT helper assignment support
Implement support for explicit per-zone conntrack helper assignment in
the raw table in order to compensate for the now disabled automatic
helper assignment in recent Linux kernels.
This commit adds, along with the required infrastructure, a new per-
zone uci option "helper" which can be used to tie one or more CT helpers
to a given zone.
For example the following configuration:
config zone
option name lan
option network lan
list helper ftp
list helper sip
... will assign the FTP and SIP conntrack helpers as specified in
/usr/share/fw3/helpers.conf to traffic originating from the LAN zone.
Additionally, a new boolean option "auto_helper" has been defined for
both "config defaults" and "config zone" sections, with the former
option overruling the latter.
When the default true "option auto_helper" is set, all available helpers
are automatically attached to each non-masq zone (i.e. "lan" by default).
When one or more "list helper" options are specified, the zone has
masquerading enabled or "auto_helper" is set to false, then the automatic
helper attachment is disabled for the corresponding zone.
Furthermore, this commit introduces support for a new 'HELPER' target in
"config rule" sections, along with "option helper" to match helper traffic
and "option set_helper" to assign CT helpers to a stream.
Finally, "config redirect" sections support "option helper" too now,
which causes fw3 to emit helper setting rules for forwarded DNAT traffic.
When "option helper" is not defined for a redirect and when the global
option "auto_helper" is not disabled, fw3 will pick a suitable helper
based on the destination protocol and port and assign it to DNATed traffic.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 7 Jun 2017 14:20:24 +0000 (16:20 +0200)]
zones: disable masq when resolving of all masq_src or masq_dest items failed
Avoid generating 0.0.0.0/0 masquerade rules when resolving of the
corresponding symbolic masq_src or masq_dest value failed.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 7 Jun 2017 14:18:30 +0000 (16:18 +0200)]
options: emit an empty address item when resolving networks fails
Adjust fw3_parse_network() to emit an empty address item with
.set = false, .resolved = true when we failed to resolve the network
name into any ip address.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 7 Jun 2017 13:17:42 +0000 (15:17 +0200)]
ubus: let fw3_ubus_address() return the number of resolved addresses
Change fw3_ubus_address() to return the number of addresses resolved from
the given network name, this will be required to handle failed resolving
in higher layers later on.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Pierre Lebleu [Fri, 3 Nov 2017 16:12:09 +0000 (17:12 +0100)]
firewall3: ubus: parse the firewall data within the service itself
It gives the ability to create firewall rules within the service
itself and independently of the instances.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Jo-Philipp Wich [Sat, 27 May 2017 10:29:55 +0000 (12:29 +0200)]
options: remove stray continue statement
The continue statement was mistakingly copy-pasted from other error
handling code.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 26 May 2017 16:42:05 +0000 (18:42 +0200)]
options: improve handling of negations when parsing space separated values
Improve the space separated list parser to interprete "val1 ! val2"
as ("val1", "!val2") instead of ("val1", "!", "val2").
This corrects parsing of sections like ...
config rule
option sec_ip '! 1.1.1.0/24'
... which previously errored out with:
Warning: Option @rule[0].src_ip has invalid value '!'
Fixes FS#806.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 26 May 2017 16:25:32 +0000 (18:25 +0200)]
iptables: support -i, -o, -s and -d in option extra
Allow "option extra" to specify "-i", "-o", "-s" and "-d" arguments which
previously caused rules to get rejected with "Bad argument" errors.
Partially fixes FS#806.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Wed, 17 May 2017 12:49:17 +0000 (14:49 +0200)]
ubus: increase ubus network interface dump timeout
When netifd is being stressed (eg doing reconfig using multiple interfaces)
ubus timeouts can be observed when invoking network interface dump.
Increase the ubus timeout to 2000 msec similar to the service ubus timeout.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jo-Philipp Wich [Tue, 2 May 2017 13:01:02 +0000 (15:01 +0200)]
iptables: add exception handling
Override libxtables standard error handler to not exit the program but to
longjmp() back to error handling code which is simply skipping the rule.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Pierre Lebleu [Thu, 4 May 2017 08:52:59 +0000 (10:52 +0200)]
firewall3: add check_snat() function
The snat rule check is done by a function to avoid the walking
through the list twice.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Thu, 4 May 2017 08:52:58 +0000 (10:52 +0200)]
firewall3: display the section type for UBUS rules
It gives the ability to display the section type for
rules pushed via procd services and netifd interface
firewall data.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Thu, 4 May 2017 08:52:57 +0000 (10:52 +0200)]
firewall3: add UBUS support for include scripts
It gives the ability to include scripts via procd
services and netifd interface firewall data.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Thu, 4 May 2017 08:52:56 +0000 (10:52 +0200)]
firewall3: add UBUS support for ipset sections
It gives the ability to create ipset rules via procd
services and netifd interface firewall data.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Thu, 4 May 2017 08:52:55 +0000 (10:52 +0200)]
firewall3: add UBUS support for forwarding sections
It gives the ability to create forward rules via procd
services and netifd interface firewall data.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Thu, 4 May 2017 08:52:54 +0000 (10:52 +0200)]
firewall3: add UBUS support for redirect sections
It gives the ability to create redirect rules via
procd services and netifd interface firewall data.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Thu, 4 May 2017 08:52:53 +0000 (10:52 +0200)]
firewall3: add fw3_attr_parse_name_type() function
Move the name and type parsing out of the rule file
in order to make it reusable by others.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Thu, 4 May 2017 08:52:52 +0000 (10:52 +0200)]
firewall3: replace warn_rule() by warn_section()
Replace the wan_rule() by warn_section() in order to
make it reusable by the other section type.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Pierre Lebleu [Thu, 4 May 2017 08:50:56 +0000 (10:50 +0200)]
firewall3: check the return value of fw3_parse_options()
The return value of fw3_parse_options() should be checked.
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Felix Fietkau [Tue, 9 May 2017 10:42:37 +0000 (12:42 +0200)]
build: use -Wno-format-truncation instead of -Wno-error=format-truncation
Fixes build error with older gcc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 May 2017 14:21:17 +0000 (16:21 +0200)]
utils: replace sprintf use with snprintf to avoid overflows
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 May 2017 14:17:51 +0000 (16:17 +0200)]
build: disable the format-truncation warning error to fix gcc 7 build errors
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Sun, 9 Apr 2017 12:35:32 +0000 (14:35 +0200)]
zones: drop outgoing invalid traffic in masqueraded zones
Install conntrack state invalid drop rules to catch outgoing, un-natted
traffic in zones with enabled masquerading.
Also introduce a new option "masq_allow_invalid" it inhibit this new
drop rules.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sun, 9 Apr 2017 13:19:52 +0000 (15:19 +0200)]
rules: fix UCI context in error reporting
Commit
e678dcb "Add support for netifd-generated rules" broke the UCI
context reporting for rule warnings. Refactor the code to restore this
functionality.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Thu, 13 Apr 2017 13:49:04 +0000 (15:49 +0200)]
ubus: fix interface name and proto lookup
Lookup of iface_name and iface_proto in the json data were switched
in fw3_ubus_rules
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jo-Philipp Wich [Wed, 22 Feb 2017 09:46:58 +0000 (10:46 +0100)]
firewall3: fix handling of UTC times
The --utc parameter is deprecated and UTC times are the default now.
To achieve local time, the --kenreltz param has to be passed instead
so invert the logic and swap --utc with --kerneltz.
Fixes #548.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 7 Feb 2017 21:10:19 +0000 (22:10 +0100)]
iptables: support xtables API > 11
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 13 Jan 2017 17:19:43 +0000 (18:19 +0100)]
zones: do not check conntrack state in zone_*_dest_ACCEPT chains
Packets which are merely forwarded by the router and which are neither
involved in any DNAT/SNAT nor originate locally, are considered INVALID
from a conntrack point of view, causing them to get dropped in the
zone_*_dest_ACCEPT chains, since those only allow stream with state NEW
or UNTRACKED.
Remove the ctstate restriction on dest accept chains to properly pass-
through unrelated 3rd party traffic.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 29 Nov 2016 11:27:42 +0000 (12:27 +0100)]
global: remove automatic notrack rules
With recent Kernel versions and the introduction of the conntrack routing
cache there is no need to maintain performance hacks in userspace anymore,
so simply drop the generation of automatic -j CT --notrack rules for zones.
This also fixes some cases where traffic is not matched for zones that do
not explicitely enforce connection tracking.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Mon, 7 Nov 2016 14:27:49 +0000 (15:27 +0100)]
forwards: properly propagate conntrack flag
In the following topology:
config zone
option name A
config zone
option name B
config zone
option name C
option conntrack 1
config forwarding
option src A
option dest B
config forwarding
option src A
option dest C
... the conntrack flag needs to be propagated into both zones A and B as well.
Since A is connected with C, A will inherit C's conntrack requirement which
means that B will need to inherit the flag as well since it is connected to A.
The current code fails to apply the conntrack requirement flag recursively to
zones, leading to stray NOTRACK rules which break conntrack based traffic
policing.
Change the implementation to iteratively reapply the conntrack fixup logic
until no more zones had been changed in order to ensure that all directly and
indirectly connected zones receive the conntrack requirement flag.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sun, 6 Nov 2016 18:14:47 +0000 (19:14 +0100)]
iptables: move includes into iptables.c to avoid kernel header clashes
In order to avoid header clashes and redefinition errors in compilation
units which include iptables.h, move all includes into the iptables.c
file and only provide a forward declaration for struct fw3_ipt_rule.
This allows us to hide all xtables specific direct and indirect includes
in order to only expose a clean interface which does not rely on any kernel
header bits.
Within iptables.c, reshuffle the includes and predeclare some guard defines
to allow compilation on both glibc as well as patched and unpatched musl
systems.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Ralph Sennhauser [Sun, 6 Nov 2016 09:59:43 +0000 (10:59 +0100)]
musl-compat: avoid kernel header conflicts
The conflict between Musls net/if.h and linux/if.h is an old well known
one and taken care of by a series of linux-headers patches in OpenWrt.
Since Linux 4.8-rc5 Firewall3 also indirectly pulls in linux/in.h and
linux/in6.h leading to new conflicts.
As Firewall3 is fine with just the libc headers prevent inclusion of the
corresponding kernel headers.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Jo-Philipp Wich [Sun, 6 Nov 2016 16:18:36 +0000 (17:18 +0100)]
iptables: remove usage of xt_id
Instead of relying on the nonstandard xt_id match, use the xt_comment match
to tag own rules. Any rule with a comment starting with "!fw3" is considered
to be firewall3 internal.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sun, 6 Nov 2016 15:58:09 +0000 (16:58 +0100)]
main: make failing ubus connection nonfatal
The ubus network runtime information is not strictly required to use firewall3,
so make a failing ubus connection nonfatal.
This allows testing and running firewall3 on an ordinary desktop linux system,
given an appropriate configuration which uses "option device" instead of
"option network" for zone declarations.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sun, 6 Nov 2016 15:47:23 +0000 (16:47 +0100)]
iptables: rework extension loader
Now that we wrap xtables_register_match() and xtables_register_target() we do
not need to load the extensions ourselves anymore since there is no need to
keep the library handles for dlclose().
Switch to libxtables own loader by invoking xtables_find_match() and
xtables_find_target() with XTF_TRY_LOAD .
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sun, 6 Nov 2016 14:20:23 +0000 (15:20 +0100)]
iptables: declare _GNU_SOURCE to define RTLD_NEXT
This is required to build firewall3 on non-musl systems.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Ralph Sennhauser [Sun, 6 Nov 2016 07:33:37 +0000 (08:33 +0100)]
iptables: optional loading of static extensions
Make loading of static extensions optional to support vanilla iptables
in it's default configuration by setting DISABLE_STATIC_EXTENSIONS
instead of hackery.
In case iptables is built with --disable-static libext.a, libext4.a and
libext6.a which OpenWrt installs in the form of libiptext.so,
libiptext4.so, libiptext6.so to save a couple more bytes are of no use
or non-existent one could say. So this commit avoids requiring a
tampered with iptables.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
[Jo-Philipp Wich: stub init_extensions*() instead to reduce amount of ifdefs]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Ralph Sennhauser [Sat, 5 Nov 2016 16:40:38 +0000 (17:40 +0100)]
iptables: fix loading standard target
In case iptables is built with --disable-static xt_standard needs to be
loaded just like the other extensions.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
[Jo-Philipp Wich: minor code style change to if/return instead of if/else]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Ralph Sennhauser [Fri, 4 Nov 2016 13:41:10 +0000 (14:41 +0100)]
iptables: add support for version 1.6.0
Account for the struct xtables_globals change and add API version 11 to
the supported APIs.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Jo-Philipp Wich [Tue, 1 Nov 2016 22:19:24 +0000 (23:19 +0100)]
zones: properly handle multiple masq_src / masq_dest negations (FS#248)
Properly implement masquerade exceptions by using -j RETURN rules to jump out
of the postrouting container chain and only emit the permutated -j MASQUERADE
rules for non-negated addresses.
Fixes FD#248.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 9 Aug 2016 09:00:45 +0000 (11:00 +0200)]
iptables: use different approach for managing loadable extensions
Since musl libc does not support unloading libraries via dlclose() and since
we should not explicitely call library constructors we need to use an
alternative approach to track the match registrations performed by iptables
shared objects.
This commit changes the iptables glue code to keep a global registry of non-
builtin matches and targets.
We implement the bookkeeping by intercepting xtables_register_match() and
xtables_register_target() calls in order to record any extension registration
attempt performed by a loadable iptables library.
The code subsequently uses the global list of dynamically loaded extensions
to re-register dynamic matches and targets for each address family / table
combination.
As a consequence we can get rid of the lib vector in the iptables handle
and remove the dlclose() handling entirely. This simplifies the
load_extension() as well.
Fixes FS#31.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Florian Fainelli [Fri, 2 Sep 2016 02:10:15 +0000 (19:10 -0700)]
utils.h: Avoid name clashes for setbit/delbit/hasbit
Rename to fw3_{set,del,has}bit to avoid name clashes with sys/param.h:
/opt/toolchains/stbgcc-4.8-1.5/arm-linux-gnueabihf/sys-root/usr/include/sys/param.h:80:0: note: this is the location of the previous definition
#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jo-Philipp Wich [Mon, 8 Aug 2016 14:48:47 +0000 (16:48 +0200)]
zones: allow untracked traffic as well
Now that we only allow ctstate NEW traffic by default we also need to
whitelist traffic explicitely marked by --notrack.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Mon, 8 Aug 2016 14:25:37 +0000 (16:25 +0200)]
defaults: disable drop_invalid by default
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Mon, 8 Aug 2016 13:52:28 +0000 (15:52 +0200)]
zones: restrict default ACCEPT rules to NEW ctstate
Restrict the per-zone default accept rules to only accept streams with
conntrack state NEW when drop_invalid is disabled.
This commit hardens the firewall in order to allow disabling drop_invalid
by default since ctstate INVALID also matches desired traffic like IPv6
neighbour discovery messages.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Florian Fainelli [Mon, 11 Jul 2016 19:07:08 +0000 (12:07 -0700)]
cmake: Find uci.h
Add a CMake FIND_PATH and INCLUDE_DIRECTORIES searching for uci.h. Some
external toolchains which do not include standard locations would fail
to find the header otherwise.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jo-Philipp Wich [Tue, 7 Jun 2016 12:13:25 +0000 (14:13 +0200)]
treewide: replace jow@openwrt.org with jo@mein.io
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Alin Năstac [Fri, 29 Apr 2016 13:00:01 +0000 (15:00 +0200)]
load running state after lock is acquired
When running "/etc/init.d/firewall reload & fw3 -q restart", the
fw3 instance that handle the reload might try to read the running
state after firewall was stopped by the fw3 instance that does the
restarting. Since a NULL run_state will transform reload operation in
start operation, the resulted iptables chains will contain duplicate
sets of rules.
Daniel Golle [Thu, 28 Apr 2016 12:25:02 +0000 (14:25 +0200)]
set mark for locally generated traffic in OUTPUT chain
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Alexandru Ardelean [Wed, 27 Apr 2016 06:16:51 +0000 (09:16 +0300)]
defaults.c: remove toplevel_rule struct
Since commit
60f1444 , this struct is no longer used.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>