sh: trivial build cleanups.

Several errors were spotted during building for custom config (SMP
included). Although SMP still does not compile (no ipi and
__smp_call_function) and does not work, this looks a bit cleaner.
Some other errors obtained via gcc-4.1.0 build.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Fix vsyscall build failure.

  CC      arch/sh/kernel/vsyscall/vsyscall.o
a/arch/sh/kernel/vsyscall/vsyscall.c: In function 'arch_setup_additional_pages':
a/arch/sh/kernel/vsyscall/vsyscall.c:63: error: dereferencing pointer to incomplete type
a/arch/sh/kernel/vsyscall/vsyscall.c:67: error: dereferencing pointer to incomplete type
a/arch/sh/kernel/vsyscall/vsyscall.c:82: error: dereferencing pointer to incomplete type
a/arch/sh/kernel/vsyscall/vsyscall.c:85: error: dereferencing pointer to incomplete type
a/arch/sh/kernel/vsyscall/vsyscall.c: In function 'arch_vma_name':
a/arch/sh/kernel/vsyscall/vsyscall.c:91: error: dereferencing pointer to incomplete type

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Trivial fix for dma-api compile failure.

Trivial fix for arch/sh/drivers/dma/dma-api.c compile failure:

  CC      arch/sh/drivers/dma/dma-api.o
a/arch/sh/drivers/dma/dma-api.c: In function 'dma_wait_for_completion':
a/arch/sh/drivers/dma/dma-api.c:233: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
a/arch/sh/drivers/dma/dma-api.c:233: error: (Each undeclared identifier is reported only once
a/arch/sh/drivers/dma/dma-api.c:233: error: for each function it appears in.)
a/arch/sh/drivers/dma/dma-api.c:233: warning: implicit declaration of function 'schedule'

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Fix pcrel too far for in_nmi label.

Add lost in_nmi definition to solve pcrel too far.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: section mismatch fixes for system timer.

Fix up a couple of section mismatch warnings regarding sys_timer.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Merge /pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix dreamcast build for IRQ changes.
  sh: Fix clock multiplier on SH7722.
  sh: Wire up kdump crash kernel exec in die().
  sh: sr.bl toggling around idle sleep.
  sh: disable genrtc support.
  fs: Kill sh dependency for binfmt_flat.
  sh: Disable psw support for R7785RP.
  sh: Fix page size alignment in __copy_user_page().
  sh: Fix up various compile warnings for SE boards.
  sh: Wire up signalfd/timerfd/eventfd syscalls.
  sh: revert addition of page fault notifiers
  spelling fixes: arch/sh/
  input: hp680_ts compile fixes.
  sh: landisk: Header cleanups.
  sh: landisk: rtc-rs5c313 support.
  sh: Kill off pmb slab cache destructor.
  sh: Fix up psw build rules for r7780rp.
  sh: Shut up compiler warnings in __do_page_fault().

Merge branch 'master' of ssh:///linux/kernel/git/mchehab/v4l-dvb

* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5691): Ov7670: reset clkrc in rgb565 mode
  V4L/DVB (5690): Cafe_ccic: Properly power down the sensor
  V4L/DVB (5680): Tuner-simple.c fix suport for SECAM with FI1216MF
  V4L/DVB (5630): Dvb-core: Handle failures to create devices
  V4L/DVB (5639a): Fix dst usage count
  V4L/DVB (5670): Adding new fields to v4l2_pix_format broke the ABI, reverted that change
  V4L/DVB (5640): Fix: em28xx shouldn't be selecting VIDEO_BUF
  V4L/DVB (5639): Fix Kconfig dependencies for ivtv

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix kmalloc(0) in arch/ia64/pci/pci.c
  [IA64] Only unwind non-running tasks.
  [IA64] Improve unwind checking.
  [IA64] Yet another section mismatch warning
  [IA64] Fix bogus messages about system calls not implemented.

V4L/DVB (5691): Ov7670: reset clkrc in rgb565 mode

A bug in the ov7670 sensor causes it to introduce noise unless the CLKRC
register is rewritten *after* setting the image mode.  Naturally,
resetting CLKRC in this way will cause other modes to fail.  So
carefully poke the register only when indicated.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (5690): Cafe_ccic: Properly power down the sensor

The proper method for powering down the sensor on OLPC systems has
changed somewhat; in particular, the sensor must be powered down
completely (rather than simply told to power down) or the associated
"camera active" LED will stay on.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (5680): Tuner-simple.c fix suport for SECAM with FI1216MF

Allow to use SECAM-BG with the FI1216MF tuner.

The selection is done with the secam=B module argument.

The default behaviour should be the same as before.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (5630): Dvb-core: Handle failures to create devices

dvb-core is not started early enough when device drivers that use dvb are
compiled in so dvb_register_device fails (silently) since dvb_class is
NULL, this runs dvb_init using subsys_initcall instead of module_init.

dvb_register_device will now check the return value of class_device_create.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (5639a): Fix dst usage count

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (5670): Adding new fields to v4l2_pix_format broke the ABI, reverted that change

Reverted the change to struct v4l2_pix_format. I completely missed that
this struct was used by existing ioctls so that changing it broke the ABI.
I will have to think of another way of setting the top/left coordinates
but for now this change is reverted to preserve compatibility.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (5640): Fix: em28xx shouldn't be selecting VIDEO_BUF

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (5639): Fix Kconfig dependencies for ivtv

ivtv were wrongly marked as dependent of USB.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

[IA64] fix kmalloc(0) in arch/ia64/pci/pci.c

Hiroyuki Kamezawa reported the problem that pci_acpi_scan_root() of
ia64 might call kmalloc_node() with zero size.

Currently ia64's pci_acpi_scan_root() assumes that _CRS method of root
bridge has at least one resource window. But, the root bridges that
has no resource window must be taken into account.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Only unwind non-running tasks.

Unwinding a running task has proven problematic.

In one instance, the running task was attempting to unwind itself and
received an interrupt between when get_wchan allocated local variables on
the stack and when unw_init_from_blocked_task was called which resulted
in unw_init_frame_info to place this tasks task_struct pointer over the
switch stack's ar_bspstore entry.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Improve unwind checking.

This patch adds some sanity checks to keep register and memory stack
pointers in the unw_frame_info structure within the tasks stack address
range.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[POWERPC] Fix warning in 32-bit builds with CONFIG_HIGHMEM

Some missing fixup for the removal of 4 level fixup header.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix powerpc vmlinux.lds.S

Sam's recent change in 7664709b44a13e2e0b545e2dd8e7b8797a1748dc
broke things for us because we ended up with *(.text.*) before
*(.text), whereas previously *(.text) was first.  This was
important because the start of the text section contains the
kernel entry point.

In fact, we don't need that *(.text.*) thing anymore and it
incorrectly matched .text.init.refok, thus putting it before
.text. .. ouch !

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix typo: MMCR0_PMA0 != MMCR0_PMAO

pmc.c has:

#ifndef MMCR0_PMA0
#define MMCR0_PMA0     0

This one took a while to find.  Unfortunately its the wrong define
(number 0 vs letter O). Its probably worth removing this override, since
if our includes get screwed up we will have the same (hard to debug)
failure.

Fix it simply for now, so that we can backport to stable.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add missing pmc_type fields in cpu_table

A number of cpu_table entries were missing the pmc_type field,
which means that the sysfs entries for the performance monitor
counters don't get created.  This adds them.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix smp_call_function to be preempt-safe

smp_call_function_map() was not safe against preemption to another
cpu: its test for removing self from map was outside the spinlock.
Rearrange it a little to fix that.

smp_call_function_single() was also wrong: now get_cpu() before
excluding self, as other architectures do.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix headers check fallout

commit e8edc6e03a5c8562dc70a6d969f732bdb355a7e7 added an include of
linux/jiffies.h in linux/smb_fs.h outside the ifdef __KERNEL__.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make 'headerscheck' stop immediately on an error

This should make it stop immediately after printing the _helpful_ error
message, rather than continuing to spit out many pages more of 'CHECK
include/linux/foo.h' before eventually coming to a halt with something
less obvious.

Now I get this...
  CHECK   include/linux/smb_fs.h
/shiny/git/linux-2.6/usr/include/linux/smb_fs.h requires linux/jiffies.h, which does not exist in exported headers
make[2]: *** [/shiny/git/linux-2.6/usr/include/linux/.check.smb_fs.h] Error 1
make[1]: *** [linux] Error 2
make: *** [headers_check] Error 2

Signed-off-by-if-Sam-says-so: David Woodhouse <dwmw2@infradead.org>
[ Sam had better say so! This made me waste way too much time. - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/LDM: build fix

This from a "tested" patch...

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "kbuild: make better section mismatch reports on i386, arm and mips"

This reverts commit f892b7d480eec809a5dfbd6e65742b3f3155e50e, which
totally broke the build on x86 with CONFIG_RELOCATABLE (which, as far as
I can tell, is the only case where it should even matter!) due to a
SIGSEGV in modpost.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  Add constant for FCS/CRC length (frame check sequence)
  declance: Remove a dangling spin_unlock_irq() thingy
  e1000: Don't enable polling in open() (was: e1000: assertion hit in e1000_clean(), kernel 2.6.21.1)

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: bump versions
  libata: Trim trailing whitespace
  libata: Kiss post_set_mode goodbye
  ata_piix: clean up
  pata_hpt366: Enable bits are unreliable so don't use them
  libata: Add Seagate STT20000A to DMA blacklist.
  ahci: disable 64bit dma on sb600

libata: bump versions

Signed-off-by: Jeff Garzik <jeff@garzik.org>

libata: Trim trailing whitespace

Signed-off-by: Jeff Garzik <jeff@garzik.org>

libata: Kiss post_set_mode goodbye

As of the -mm tree we don't have post_set_mode users any more.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ata_piix: clean up

With cable methods in place we don't need a custom error handler for SATA
so get rid of it

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

pata_hpt366: Enable bits are unreliable so don't use them

Various people had problems with both old and new IDE when hpt366 enable
bits started getting honoured. It turns out they are not reliable so
don't rely on them

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

libata: Add Seagate STT20000A to DMA blacklist.

http://bugzilla.kernel.org/show_bug.cgi?id=1044 points out an
additional hard disk that doesn't handle DMA transfers correctly.
This patch is the libata variant of the earlier patch to drivers/ide/

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ahci: disable 64bit dma on sb600

SB600 claims it can do 64bit DMA but it can't.  Disable it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Add constant for FCS/CRC length (frame check sequence)

About a dozen drivers that have some form of crc checksumming or offloading
use this constant, warranting a global define for it.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

declance: Remove a dangling spin_unlock_irq() thingy

 The spin_unlock_irq() invocation in lance_start_xmit() has no matching
locking request.  The call is already protected by netif_tx_lock, so
remove the statement.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

e1000: Don't enable polling in open() (was: e1000: assertion hit in e1000_clean(), kernel 2.6.21.1)

Herbert Xu wrote:
"netif_poll_enable can only be called if you've previously called
netif_poll_disable.  Otherwise a poll might already be in action
and you may get a crash like this."

Removing the call to netif_poll_enable in e1000_open should fix this issue,
the only other call to netif_poll_enable is in e1000_up() which is only
reached after a device reset or resume.

Bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=8455
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=240339

Tested by Doug Chapman <doug.chapman@hp.com>

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/cm: Improve local id allocation
  IPoIB/cm: Fix SRQ WR leak
  IB/ipoib: Fix typos in error messages
  IB/mlx4: Check if SRQ is full when posting receive
  IB/mlx4: Pass send queue sizes from userspace to kernel
  IB/mlx4: Fix check of opcode in mlx4_ib_post_send()
  mlx4_core: Fix array overrun in dump_dev_cap_flags()
  IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions
  IB/mthca: Fix RESET to ERROR transition
  IB/mlx4: Set GRH:HopLimit when sending globally routed MADs
  IB/mthca: Set GRH:HopLimit when building MLX headers
  IB/mlx4: Fix check of max_qp_dest_rdma in modify QP
  IB/mthca: Fix use-after-free on device restart
  IB/ehca: Return proper error code if register_mr fails
  IPoIB: Handle P_Key table reordering
  IB/core: Use start_port() and end_port()
  IB/core: Add helpers for uncached GID and P_Key searches
  IB/ipath: Fix potential deadlock with multicast spinlocks
  IB/core: Free umem when mm is already gone

IB/cm: Improve local id allocation

The IB CM uses an idr for local id allocations, with a running counter
as start_id.  This fails to generate distinct ids if

1. An id is constantly created and destroyed
2. A chunk of ids just beyond the current next_id value is occupied

This in turn leads to an increased chance of connection request being
mis-detected as a duplicate, sometimes for several retries, until
next_id gets past the block of allocated ids. This has been observed
in practice.

As a fix, remember the last id allocated and start immediately above it.
This also fixes a problem with the old code, where next_id might
overflow and become negative.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

IPoIB/cm: Fix SRQ WR leak

SRQ WR leakage has been observed with IPoIB/CM: e.g. flipping ports on
and off will, with time, leak out all WRs and then all connections
will start getting RNR NAKs.  Fix this in the way suggested by spec:
move the QP being destroyed to the error state, wait for "Last WQE
Reached" event and then post WR on a "drain QP" connected to the same
CQ.  Once we observe a completion on the drain QP, it's safe to call
ib_destroy_qp.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

IB/ipoib: Fix typos in error messages

Trivial error message fixups.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Merge git://git./linux/kernel/git/sam/kbuild-fix

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fix:
  mm/slab: fix section mismatch warning
  mm: fix section mismatch warnings
  init/main: use __init_refok to fix section mismatch
  kbuild: introduce __init_refok/__initdata_refok to supress section mismatch warnings
  all-archs: consolidate .data section definition in asm-generic
  all-archs: consolidate .text section definition in asm-generic
  kbuild: add "Section mismatch" warning whitelist for powerpc
  kbuild: make better section mismatch reports on i386, arm and mips
  kbuild: make modpost section warnings clearer
  kconfig: search harder for curses library in check-lxdialog.sh
  kbuild: include limits.h in sumversion.c for PATH_MAX
  powerpc: Fix the MODALIAS generation in modpost for of devices

Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] More verbose show_mem() like other architectures.
  [S390] Make use of kretprobe_assert.
  [S390] Wire up signald, timerfd and eventfd syscalls.
  [S390] Wire up sys_utimensat.
  [S390] cio: Update documentation.

Merge branch 'master' of /linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: Fix race condition about network device name allocation.
  [IPV4]: icmp: fix crash with sysctl_icmp_errors_use_inbound_ifaddr
  [NETFILTER]: nf_conntrack_ipv4: fix incorrect #ifdef config name
  [NETFILTER]: nf_conntrack: fix use-after-free in helper destroy callback invocation
  [IPSEC] pfkey: Load specific algorithm in pfkey_add rather than all
  [TCP] FRTO: Prevent state inconsistency in corner cases
  [TCP] FRTO: Add missing ECN CWR sending to one of the responses
  [NET]: Fix net/core/skbuff.c gcc-3.2.3 compilation error
  [RFKILL]: Fix check for correct rfkill allocation
  [IPV6]: Add ip6_tunnel.h to headers_install

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  [ARM] spelling fixes
  [ARM] at91_adc parenthesis balance
  [ARM] 4400/1: S3C24XX: Add high-speed MMC device definition
  [ARM] 4399/2: S3C2443: Fix SMDK2443 nand timings
  [ARM] 4398/1: S3C2443: Fix watchdog IRQ number
  [ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguity
  [ARM] 4396/1: S3C2443: Add missing HCLK clocks
  [ARM] 4395/1: S3C24XX: add include of <linux/sysdev.h> to relevant machines
  [ARM] 4388/1: no need for arm/mm mmap range checks for non-mmu
  [ARM] 4387/1: fix /proc/cpuinfo formatting for pre-ARM7 parts
  [ARM] ARMv6: add CPU_HAS_ASID configuration
  [ARM] integrator: fix pci_v3 compile error with DEBUG_LL
  [ARM] gic: Fix gic cascade irq handling
  [ARM] Silence OMAP kernel configuration warning
  [ARM] Update ARM syscalls
  [ARM] 4384/1: S3C2412/13 SPI registers offset correction
  [ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files
  [ARM] 4382/1: iop13xx: fix msi support
  [ARM] Remove Integrator/CP SMP platform support
  [ARM] 4378/1: KS8695: Serial driver fix
  ...

LDM: Fix for Windows Vista dynamic disks

This fixes the LDM driver so that it works with Windows Vista dynamic
disks which are subtly different to Windows 2000/XP ones.

The patch was needed to get a Vista formatted dynamic disk to be
recognized and parsed successfully.

Thanks go to Chris Teachworth for the report and testing.

Cc: Richard Russon <ldm@flatcap.org>
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: fix PGE mask

cr4 is a 32-bit register, so casting the mask to an unsigned char is wrong,
as it clears more than the PGE bit.

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: vsyscall time() fix

The vsyscall time() function basically returns the second portion of
xtime directly.  This however means that there is about a ticks worth of
time each second where time() will return a second value less then what
gettimeofday() does.

Additionally, this window where vtime() is behind vgettimeofday() grows
when dynticks is enabled, so its probably good to get this in before
dynticks lands.

Big thanks to Sripathi for noticing this issue and creating a test case
to work with!

This patch changes the vtime() implemenation to call vgettimeofday(),
much as syscall time() implementation calls gettimeofday().

2.6.21 stable candidate too

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: early_print kernel console should send CRLF not LFCR

In
commit d358788f3f30113e49882187d794832905e42592
Author: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date:   Mon Mar 20 20:00:09 2006 +0000

Glen Turner reported that writing LFCR rather than the more
traditional CRLF causes issues with some terminals.

Since this afflicts many serial drivers, extract the common code to a
library function (uart_console_write) and arrange for each driver to
supply a "putchar" function.

but early_printk is left out.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Enable CX8/PGE CPUID bits early on VIA C3

Fix boot failures with the early CPUID checking on VIA C3

Includes fixes from Christian Volkmann

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Fix wrong CPU error message in early boot path

- boot/setup.S did not print "PANIC: CPU too old for this kernel"
  ( not visible, also the message did not match )
- I add "# missed before: set ds"
  => somebody should check if I am right with the way to set.
  => seems to be a generic error in setup.S not to set "ds" for error messages.

AK: extracted patch out of other changes
AK: also couldn't find any other case where ds is wrong
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Clear MCE flag on AMD K6

It reports machine check capability in CPUID, but doesn't actually
implement all the necessary MSRs of the standard Intel machine
check architecture.

This fixes a boot failure on K6s recently introduced.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Support gcc 5 properly

The ifdef tests were broken.  Assume it acts like gcc 4

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Fix K8/core2 oprofile on multiple CPUs

Only try to allocate MSRs once instead of for every CPU.

This assumes the MSRs are the same on all CPUs which is currently
true. P4-HT is a special case for different SMT threads, but the code
always saves/restores all MSRs so it works identical.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Support x86_64 in make buildtar

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin SPI: cleanup according to David Brownell's review

a) platorm_driver_probe(...) instead of platform_driver_register(&driver);
b) set bfin_spi_enable and bfin_spi_disable static
c) Why is the width flag a u32?
d) maybe use dev_dbg() instead of pr_debug()

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin serial driver: implement support for ignoring parity/break errors

properly setting up and respecting the read_status_mask / ignore_status_mask fields of the serial core

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin serial driver: fix overhead issue

Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: update pm.c according to power management API change.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: update defconfig files

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: add board default configs to blackfin arch

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: Change NO_ACCESS_CHECK to ACCESS_CHECK

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: fix signal handling bug

There's a forum thread at
https://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&_forum_action=MessageReply&message_id=24741

which has a testcase involving signal handling that crashes quite readily.
Inspecting the code I believe what happens is that signal handling can become
confused when it is invoked on return from an interrupt, if the contents of
P0 and R0 at the time of the interrupt happen to be such that P0 is larger
than zero (indicating to the signal code that we're in a syscall), and R0
happens to have a value of something like -EINTR or -ERESTARTSYS.
Fixed by setting orig_p0 to -1 if we're returning from an interrupt.  The
testcase now seems to run without problems.

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: cache SWRST value at bootup so other things like watchdog can non-destructively query it

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: update blackfin header files to latest one in VDSP.

a) add new processor BF52x/BF54x header files
b) update blackfin BF533/BF537/BF561 header files to latest one in VDSP.
c) scrub watchdog/rtc masks from headers as we dont need/want them (too generic and the drivers dont use them)

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: make sure we use local labels

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: dont clear the bit that tells coreb to start booting

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: dma_memcpy borken for > 64K

Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: document why we have to touch the UART peripheral in our boot up code

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: issue reset via SWRST so we dont clobber the watchdog state

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: move board specific setup out of common init code and into the board specific init code

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: finish removing p* volatile defines for MMRs

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: dont clear status register bits in SWRST so we can actually use it

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: make sure we declare the revid functions as pure (since they are)

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: initial tepla-bf561 board support

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: Fix bug using usb keyboard crashes kernel

Without conswitchp preset, we have the following situation:

 - During initcalls: con_init is called, and returns because of
   !display_desc.

 - At this point there is no memory allocated for vc_cons[].d
   A bit later vty_init calls kbd_init.

 - From now on events are passed to kbd_event which will then call
   kbd_keycode.

 - kbd_keycode will oops on a NULL pointer dereference on vc->vc_tty

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
[ Added commit description based on email thread. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: fix trace output for FLAT binaries

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: GPIO fix some defines

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: DMA operation cleanup

1) Disable Interrupts during DMA memcpy to avoid raise conditions.
2) Mark MDMA channel 0 as reserved, since were using it internally.
3) Add DMA based equivalents for insX and outsX.
4) Our insX and outsX only handles len <= 2^16.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: Move write to VR_CTL closer to IDLE

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: Fix reserved map after we changed PORT_H definition

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: mark a bunch of local functions as static

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: Add configuration data for ISP176x on BF561

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: fix a few random warnings

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: ISP1761 doesn't work for USB flash disk

ZONE_DMA is required for some drivers subsystem, such as USB/SCSI.

Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: add SPI MMC driver support on bf533-stamp, tested on STAMP-BF533

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin arch: Add Workaround for ANOMALY 05000257

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Detach sched.h from mm.h

First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
alpha alpha-up
arm
i386 i386-up i386-defconfig i386-allnoconfig
ia64 ia64-up
m68k
mips
parisc parisc-up
powerpc powerpc-up
s390 s390-up
sparc sparc-up
sparc64 sparc64-up
um-x86_64
x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix "fs: convert core functions to zero_user_page"

The bug was introduced by 01f2705daf5a36208e69d7cf95db9c330f843af6.
It misses to convert the first argument, it should be "new_page".

This became a cause of fatfs corruption.

Cc: Nate Diller <nate.diller@gmail.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/herbert/crypto-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] api: Read module pointer before freeing algorithm

[S390] More verbose show_mem() like other architectures.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Make use of kretprobe_assert.

s390 change for git commit 0f95b7fc839bc3272b1bf2325d8748a649bd3534.
That is print kprobes debug data before BUG().

Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Wire up signald, timerfd and eventfd syscalls.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Wire up sys_utimensat.

Wire up sys_utimensat, reserve syscall number for sys_fallocate and
add a couple of syscalls to the ignore list to get rid of warings.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] cio: Update documentation.

- read_dev_chars()/read_conf_data() are deprecated. Don't document them, but
  advise to issue the channel program from the driver itself.
- Remove some really obsolete and incorrect stuff.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>