Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boards

Signed-off-by: Grace Pan <grace.pan@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bug: kernel crash when enable SDIO host driver

update bfin-sdh platform data to fix this issue.

Pointed-out-by: Dominik Herwald <d.herwald@dsh-elektronik.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Print FP at level KERN_NOTICE

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: drop ad73311 test code

drop ad73311 test code, this can be done easily from userspace

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: update board default configs

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix typo in early printk bit size processing

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrd

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add SDIO host driver platform data

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bug - kernel stops at initial console

Bug: Boot kernel in BF533-EZKIT without set ip during boot,
it stops at initial console.

Restore serial platform_device data to fix this issue.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bug - kernel crash after config IP for ethernet port

Fix typo - kernel crash on bf533-stamp/bf533-ezkit after config IP for ethernet port

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add sdh support for bf518f-ezbrd

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bug - kernel detects BF532 incorrectly

fix this typo in this patch

Reported-by: Ben Matthews <mben12@gmail.com>
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add () to avoid warnings from gcc

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: change HWTRACE Kconfig and set it on default

change the hwtrace description to be less confusing and default it to on
(since there shouldnt be any crashes in the miss handler code itself)

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Clean oprofile build path for blackfin

[Mike Frysinger <vapier.adi@gmail.com>: scrub comment header]

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: remove hardware PM code, oprofile not use it

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: rewrite get_sclk()/get_vco()

rewrite get_sclk()/get_vco() based on the assumption sclk/vco never
changes (since today it cannot)

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: cleanup and unify the ins functions

this also fixes some errors in the ipipe merge

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Make bfin_mac built for bf51x

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch:  merge adeos blackfin part to arch/blackfin/

[Mike Frysinger <vapier.adi@gmail.com>:
 - handle bf531/bf532/bf534/bf536 variants in ipipe.h
 - cleanup IPIPE logic for bfin_set_irq_handler()
 - cleanup ipipe asm code a bit and add missing ENDPROC()
 - simplify IPIPE code in trap_c
 - unify some of the IPIPE code and fix style
 - simplify DO_IRQ_L1 handling with ipipe code
 - revert IRQ_SW_INT# addition from ipipe merge
 - remove duplicate get_{c,s}clk() prototypes
]

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Add AD7879 defaults for the Blackfin Landscape LCD EZ-Extender

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: disable pthread stack check for SMP at runtime

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: merge kgdb test code using common CONFIG_KGDB_TESTS

[Grace Pan <grace.pan@analog.com>: Add case for kgdb test in l1 and l2]

Signed-off-by: Grace Pan <grace.pan@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Faster C implementation of  no-MPU CPLB handler

This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code.

We ditch the old cplb-nompu implementation, which is a good example of
why a good algorithm in a HLL is preferrable to a bad algorithm written in
assembly.  Rather than try to construct a table of all posible CPLBs and
search it, we just create a (smaller) table of memory regions and
their attributes.  Some of the data structures are now unified for both
the mpu and nompu cases.  A lot of needless complexity in cplbinit.c is
removed.

Further optimizations:
  * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving
    these registers on the stack when entering a CPLB exception.
  * lose cli/nop/nop/sti sequences for some workarounds - these don't
  * make
    sense in an exception context

Additional code unification should be possible after this.

[Mike Frysinger <vapier.adi@gmail.com>:
 - convert CPP if statements to C if statements
 - remove redundant statements
 - use a do...while loop rather than a for loop to get slightly better
   optimization and to avoid gcc "may be used uninitialized" warnings ...
   we know that the [id]cplb_nr_bounds variables will never be 0, so this
   is OK
 - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten,
   we can punt it
 - add some BUG_ON() checks to make sure we dont overflow the small
   cplb_bounds array
 - add i/d cplb entries for the bootrom because there is functions/data in
   there we want to access
 - we do not need a NULL trailing entry as any time we access the bounds
   arrays, we use the nr_bounds variable
]

Signed-off-by: Michael McTernan <mmcternan@airvana.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: update anomaly headers to match latest sheets

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Fix bug - IrDA SIR build failed for BF533.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: panic when running on a chip rev below what we are compiled for

If we are running on a chip revision below what we are compiled for,
there will be missing anomaly workarounds, and a panic is inevitable. Do
is sooner, rather than later, so people don't look for bugs that already
have workarounds (that they turned off).

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Fix bug - wrong endpoint number and dma channels of USB

Blackfin MUSB has 8 endpoints including ep0 and 8 dma channels not 7

Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: do not allow people to pass in a diff clkin_hz value

do not allow people to pass in a diff clkin_hz value when
reprogramming clocks -- it is too late currently

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: allow clkin_hz to be specified on the command line

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: show_cpuinfo - consolidate ugly casts

rather than use *(unsigned int *)v everywhere, do this once with a local
cpu_num variable

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add __init markings to Blackfin timer init functions

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add get_dma_config() func to match set_dma_config()

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add volatile markings to DMA MMRs

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Make the interrupt edge and polarity type configurable based on IORESOURCE_BITS

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Remove wasted SIR header files

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Modify bfin_sir device configuration to board file

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: update header to match new location

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Fix typo (channel)

Channnel -> Channel

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Replace C version of 64 bit multiply with hand optimized assembly

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: remove unused members of dma_channel struct

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Update some inline assembly, tweak some register constraints

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: stub out pgprot_noncached() like other people seem to do on nommu

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Fix incorrect use of loose in cpufreq.c

It should be 'lose', not 'loose'.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add __must_check markings to our user functions like other arches

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: dma code: cannot simply OR the ndsize

cannot simply OR the ndsize ... need to clear out the old value first

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add bfin_read_MDMA_S0_CONFIG compat for dma_memcpy

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bug - crashes in tcp_v4_send_reset

Michael says that some bugs are crashes in tcp_v4_send_reset.
There's a missing clobber of "CC" in our checksum assembly
statement; fixing this makes the generated code look much saner.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: push cache flushing up to dma_memcpy

push cache flushing up to dma_memcpy() so that we call the flush
functions just once

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: request_dma() returns 0 on success, not channel

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: desc_ptr is a pointer, so declare it as such

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: move most dma functions into static inlines

move most dma functions into static inlines since they are vastly 1
liners that get/set a value in a structure

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: dma header file: strip down includes to only necessary ones

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: set_dma_callback: do not store .irq

set_dma_callback: do not store .irq if request_irq() failed so we dont
turn around and attempt to free_irq() it later on in free_dma()

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: drop irq_callback from struct dma_channel

the irq member already serves the same purpose

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: drop custom dma_interrupt_t and just use irq_handler_t

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: include linux/mm.h since we use PAGE_ALIGN and such

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: enable DEBUG_KERNEL for ADI boards

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: rewrite dma_memcpy() and dma in/out functions

- unify all dma in/out functions (takes ~35 lines of code now)
- unify dma_memcpy with dma in/out functions (1 place that touches MDMA0
  registers)
- add support for 32bit transfers
- cleanup dma_memcpy code to be much more readable
- irqs are disabled only while programming MDMA registers rather than
  the entire transaction

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: check pointers in safe_dma_memcpy

Check pointers in safe_dma_memcpy as this is the entry point for user-space code

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: push bf561 PERIPHERAL_MAP oddity into bf561-specific code

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch:  ADP5588 QWERTY I2C Keyboard Input device driver

Add BF537-STAMP platform Support

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: cleanup - use scm for changelog, not file headers

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Add basic irq stack checking for Blackfin

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Set TWI/I2C Clock to 100kHz

All slaves I'm aware of should support at least 100kHz

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: dma_memcpy() - do not return NULL when transferring a multiple of 65k

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Add BF537-STAMP platform support for ENC28J60 SPI Ethernet MAC

This device shouldn't be considered as an alternative to a Memory Mapped
or built-in Ethernet MAC. Throughput is slow (~460kByte/s) while generating
a very high system load (~60%).

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: remove #if check on L2_LENGTH

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Retire old spi_mmc driver

Turn to use the mmc_spi driver in mainline kernel.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add mmc_spi support to BF537-STAMP

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: rename MAX_BLACKFIN_DMA_CHANNEL to MAX_DMA_CHANNELS to match everyone else

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bug - kernel build fails with undefined reference to pm_overflow_handler

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Use reads/writes instead of ins/outs directly

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add const to some function prototype and struct dma_channel

Signed-off-by: Michael McTernan <mmcternan@airvana.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: implement support for /proc/dma

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: smp patch cleanup from LKML review

1. Use inline get_l1_... functions instead of macro
2. Fix compile issue about smp barrier functions

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: get oprofile work for user space

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bugs in linker script when using upstream binutils

Fix a few problems I discovered when building a kernel with upstream CVS
binutils.

We have to add the NOTES macro to our linker script, since a kernel
built with --build-id is otherwise unable to boot.  Last time NOTES was
added, it broke things, but the definition of the macro has changed not
to rely on parts of the linker script that aren't present on Blackfin.

I also noticed that _l2_lma_start does not point into the kernel image,
but rather somewhere in L1/L2 space, which seems unintended.  Also, when
the L2 section was added to the linker script, the part following it which
computes then length of the init section was not updated.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Add document about bfin-gpio

Add document about bfin-gpio when requesting a pin
both as gpio and gpio interrupt.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Remove all traces of the relocation stack

Remove all traces of the relocation stack.  It's been removed from
binutils for years now.

Add a sanity overflow check to pcrel24 relocations to catch modules that
were built without -mlong-calls.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: tweak the BUG_ON() check to allow for equal values

Tweak the BUG_ON() check to allow for equal values since the way pos is
handled ... it is always indexed and post incremented

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: gpio.h split into machine subfolders like already done for BF54x

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: cleanup the header file comments

use scm changelog rather than comment blocks in files

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: rewrite cplbinfo to use seq files

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bugs and unify BFIN_KERNEL_CLOCK option

 - remove duplicated code and headers
 - add option allowing arbitrary SDRAM/DDR Timing parameters.
 - mark automatically calculated timings as EXPERIMENTAL
 - fix comment header block

Related to BUGs:
 - kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on.
 - kernel does not boot if re-program clocks

[ Mike Frysinger <vapier.adi@gmail.com>
 - fix comment header
 - mark do_sync static
 - document the DMA shutdown
 - simplify SIC_IWR handling
 - fix ANOMALY_05000265 handling to work as intended ]

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add simple-gpio resources to all adi/tinyboards

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Allow a gpio pin be requested both as gpio and irq.

[Mike Frysinger <vapier.adi@gmail.com>:
 - use KERN_NOTICE when using gpios as both irq and non
   rather than KERN_ERR
 - embedded newlines in printk() does not fly]

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: do not allow L2 to be cached on BF561 SMP

Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: delete now unused "cclk" member of blackfin_cpudata

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Fix bug - change cpufreq doesn't take effect on bf537 now

CCLK is variable: get current CCLK in show_cpuinfo

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Request the gpio resource when making it as an irq pin, avoiding override it.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: Add code to free gpio when shutdown irq

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: fix bug - reboot fails on BF527

add ANOMALY_05000435 to handle SIC_IWR1 workaround for rebooting

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add ANOMALY_05000435 to our headers

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: only define HI/LO macros for assembly files

Only define HI/LO macros for assembly files since some common C files
use HI/LO as variable names

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: add BUG_ON() checks to make sure we dont overflow the cplb tables

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: make ROM_BASE depend on ROMKERNEL

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: noMMU CPLB lookup tables can be in L1 SRAM

 - unify duplicate page_size_table definitions
 - make sure it is placed alongside the other cplb switching code

Pointed-out-by: Michael McTernan <mmcternan@airvana.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Blackfin arch: do not include init sections in the kernel lock down as it gets released afterwards

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>