Vaibhav Nagarnaik [Thu, 7 Jun 2012 23:46:25 +0000 (16:46 -0700)]
tracing: Cleanup unnecessary function declarations
The functions defined in include/trace/syscalls.h are not used directly
since struct ftrace_event_class was introduced. Remove them from the
header file and rearrange the ftrace_event_class declarations in
trace_syscalls.c.
Link: http://lkml.kernel.org/r/1339112785-21806-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
David Sharp [Thu, 7 Jun 2012 23:46:24 +0000 (16:46 -0700)]
tracing: Trivial cleanup
Remove ftrace_format_syscall() declaration; it is neither defined nor
used. Also update a comment and formatting.
Link: http://lkml.kernel.org/r/1339112785-21806-1-git-send-email-vnagarnaik@google.com
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 11 Oct 2012 16:14:25 +0000 (12:14 -0400)]
tracing: Cache comms only after an event occurred
Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.
Here's an example, if you enable the following events:
echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable
Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:
echo 0 > /debug/tracing/events/net/net_dev_xmit/enable
and look at the trace:
cat /debug/tracing/trace
sshd-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6be0 len=114 rc=0
sshd-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6be0 len=114 rc=0
We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:
cat /debug/tracing/trace
<...>-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=
ffff88005cbb6be0 len=114 rc=0
<...>-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=
ffff88005cbb6be0 len=114 rc=0
The stored "sshd" comm has been flushed out and we get a useless "<...>".
But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 11 Oct 2012 15:14:14 +0000 (11:14 -0400)]
tracing: Have tracing_sched_wakeup_trace() use standard unlock_commit
The functon tracing_sched_wakeup_trace() does an open coded unlock
commit and save stack. This is what the trace_nowake_buffer_unlock_commit()
is for.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 11 Oct 2012 14:15:05 +0000 (10:15 -0400)]
tracing: Enable comm recording if trace_printk() is used
If comm recording is not enabled when trace_printk() is used then
you just get this type of output:
[ adding trace_printk("hello! %d", irq); in do_IRQ ]
<...>-2843 [001] d.h. 80.812300: do_IRQ: hello! 14
<...>-2734 [002] d.h2 80.824664: do_IRQ: hello! 14
<...>-2713 [003] d.h. 80.829971: do_IRQ: hello! 14
<...>-2814 [000] d.h. 80.833026: do_IRQ: hello! 14
By enabling the comm recorder when trace_printk is enabled:
hackbench-6715 [001] d.h. 193.233776: do_IRQ: hello! 21
sshd-2659 [001] d.h. 193.665862: do_IRQ: hello! 21
<idle>-0 [001] d.h1 193.665996: do_IRQ: hello! 21
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 11 Oct 2012 01:44:34 +0000 (21:44 -0400)]
tracing: Expand ring buffer when trace_printk() is used
Since tracing is not used by 99% of Linux users, even though tracing
may be configured in, it does not make sense to allocate 1.4 Megs
per CPU for the ring buffers if they are not used. Thus, on boot up
the ring buffers are set to a minimal size until something needs the
and they are expanded.
This works well for events and tracers (function, etc), but for the
asynchronous use of trace_printk() which can write to the ring buffer
at any time, does not expand the buffers.
On boot up a check is made to see if any trace_printk() is used to
see if the trace_printk() temp buffer pages should be allocated. This
same code can be used to expand the buffers as well.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Slava Pestov [Fri, 15 Jul 2011 21:23:58 +0000 (14:23 -0700)]
ring-buffer: Add a 'dropped events' counter
The existing 'overrun' counter is incremented when the ring
buffer wraps around, with overflow on (the default). We wanted
a way to count requests lost from the buffer filling up with
overflow off, too. I decided to add a new counter instead
of retro-fitting the existing one because it seems like a
different statistic to count conceptually, and also because
of how the code was structured.
Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com
Signed-off-by: Slava Pestov <slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Hiraku Toyooka [Tue, 2 Oct 2012 08:27:10 +0000 (17:27 +0900)]
tracing: Change tracer's integer flags to bool
print_max and use_max_tr in struct tracer are "int" variables and
used like flags. This is wasteful, so change the type to "bool".
Link: http://lkml.kernel.org/r/20121002082710.9807.86393.stgit@falsita
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 5 Oct 2012 16:13:07 +0000 (12:13 -0400)]
tracing: Allow tracers to start at core initcall
There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().
There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Daniel Walter [Wed, 26 Sep 2012 20:08:38 +0000 (22:08 +0200)]
tracing: Replace strict_strto* with kstrto*
* remove old string conversions with kstrto*
Link: http://lkml.kernel.org/r/20120926200838.GC1244@0x90.at
Signed-off-by: Daniel Walter <sahne@0x90.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Peter Huewe [Mon, 29 Oct 2012 20:48:17 +0000 (21:48 +0100)]
perf/x86: Fix sparse warnings
FYI, there are new sparse warnings:
arch/x86/kernel/cpu/perf_event.c:1356:18: sparse: symbol 'events_attr' was not declared. Should it be static?
This patch makes it static and also adds the static keyword to
fix arch/x86/kernel/cpu/perf_event.c:1344:9: warning: symbol
'events_sysfs_show' was not declared.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: fengguang.wu@intel.com
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-lerdpXlnruh0yvWs2owwuizl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Tue, 30 Oct 2012 07:35:33 +0000 (08:35 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements, fixes and code move from Arnaldo Carvalho de Melo:
* Initialize 'page_size' variable in the python binding, this was sent
for perf/urgent by mistake, then when merging Ingo removed it, fixing
the problem for perf/urgent, but when perf/urgent was merged with
perf/core, where that initialization is needed, made the python
binding mmap call to fail, fix it by initializing page_size again.
* Add a browser for 'perf script' and make it available from the report
and annotate browsers. It does filtering to find the scripts that
handle events found in the perf.data file used. From Feng Tang
* Move some functions from symbol.c to more appropriate files, creating
dso.[ch] in the process, no code changes. From Jiri Olsa
* Fix mmap error output message for when perf_mmap fails and returns
!-EPERM, where the default for mmap_pages, INT_MAX, was causing a
!power of 2 error message, fix from Jiri Olsa.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Tue, 16 Oct 2012 17:51:04 +0000 (14:51 -0300)]
perf python: Initialize 'page_size' variable
The commit
0c1fe6b:
'perf tools: Have the page size value available for all tools'
Broke the python binding because the global variable 'page_size' is
initialized on the main() routine, that is not called when using
just the python binding, causing evlist.mmap() to fail because it
expects that variable to be initialized to the system's page size.
Fix it by initializing it on the binding init routine.
Reported-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 20 Oct 2012 14:33:19 +0000 (16:33 +0200)]
perf record: Fix mmap error output condition
The mmap_pages default value is not power of 2 (UINT_MAX).
Together with perf_evlist__mmap function returning error value different
from EPERM, we get misleading error message: "--mmap_pages/-m value must
be a power of two."
Fixing this by adding extra check for UINT_MAX value for this error
condition.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1350743599-4805-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Tue, 30 Oct 2012 03:56:07 +0000 (11:56 +0800)]
perf header: Add is_perf_magic() func
With this function, other modules can basically check whether a file is
a legal perf data file by checking its first 8 bytes against all
possible perf magic numbers.
Change the function name from check_perf_magic to more meaningful
is_perf_magic as suggested by acme.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-7-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Tue, 30 Oct 2012 03:56:06 +0000 (11:56 +0800)]
perf hists browser: Integrate script browser into main hists browser
Integrate the script browser into "perf report" framework, users can use
function key 'r' or the drop down menu to list all perf scripts and
select one of them, just like they did for the annotation.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-6-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Tue, 30 Oct 2012 03:56:05 +0000 (11:56 +0800)]
perf annotate browser: Integrate script browser into annotation browser
Integrate the script browser into annotation, users can press function
key 'r' to list all perf scripts and select one of them to run that
script, the output will be shown in a separate browser.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-5-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Tue, 30 Oct 2012 03:56:04 +0000 (11:56 +0800)]
perf scripts browser: Add a browser for perf script
Create a script browser, so that user can check all the available
scripts for current perf data file and run them inside the main perf
report or annotation browsers, for all perf samples or for samples
belong to one thread/symbol.
Please be noted: current script browser is only for report use, and
doesn't cover the record phase, IOW it must run against one existing
perf data file.
The work flow is, users can use function key to list all the available
scripts for current perf data file in system and chose one, which will
be executed with popen("perf script -s xxx.xx",) and all the output
lines are put into one ui browser, pressing 'q' or left arrow key will
make it return to previous browser.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-4-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Tue, 30 Oct 2012 03:56:03 +0000 (11:56 +0800)]
perf script: Add more filter to find_scripts()
As suggested by Arnaldo, many scripts have their own usages and need
capture specific events or tracepoints, so only those scripts whose
target events match the events in current perf data file should be
listed in the script browser menu.
This patch will add the event match checking, by opening "xxx-record"
script to cherry pick out all events name and comparing them with
those inside the perf data file.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-3-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Tue, 30 Oct 2012 03:56:02 +0000 (11:56 +0800)]
perf tools: Add a global variable "const char *input_name"
Currently many perf commands annotate/evlist/report/script/lock etc all
support "-i" option to chose a specific perf data, and all of them
create a local "input_name" to save the file name for that perf data.
Since most of these commands need it, we can add a global variable for
it, also it can some other benefits:
1. When calling script browser inside hists/annotation browser, it needs
to know the perf data file name to run that script.
2. For further feature like runtime switching to another perf data file,
this variable can also help.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 27 Oct 2012 21:18:32 +0000 (23:18 +0200)]
perf tools: Move dso_* related functions into dso object
Moving dso_* related functions into dso object.
Keeping symbol loading related functions still in the symbol object as
it seems more convenient.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-6-git-send-email-jolsa@redhat.com
[ committer note: Use "symbol.h" instead of <symbol.h> to make it build with O= ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 27 Oct 2012 21:18:31 +0000 (23:18 +0200)]
perf tools: Move strxfrchar into string object
Moving strxfrchar function into string object.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 27 Oct 2012 21:18:30 +0000 (23:18 +0200)]
perf tools: Move hex2u64 into util object
Moving hex2u64 function into util object.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 27 Oct 2012 21:18:29 +0000 (23:18 +0200)]
perf tools: Move BUILD_ID_SIZE into build-id object
Moving BUILD_ID_SIZE define into build-id object, plus include related
changes.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 27 Oct 2012 21:18:28 +0000 (23:18 +0200)]
perf tools: Move build_id__sprintf into build-id object
Moving build_id__sprintf function into build-id object.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Fri, 26 Oct 2012 20:30:06 +0000 (13:30 -0700)]
perf tools: Move parse_events error printing to parse_events_options
The callers of parse_events usually have their own error handling. Move
the fprintf for a bad event to parse_events_options, which is the only
one who should need it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1351283415-13170-25-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Fri, 26 Oct 2012 14:52:45 +0000 (16:52 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
* perf inject changes to allow showing where a task sleeps, from Andrew Vagin.
* Makefile improvements from Namhyung Kim.
* Add --pre and --post command hooks in 'stat', from Peter Zijlstra.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 23 Oct 2012 11:40:14 +0000 (13:40 +0200)]
perf stat: Add --pre and --post command
In order to measure kernel builds, one has to do some pre/post cleanup
work in order to do the repeat build.
So provide --pre and --post command hooks to allow doing just that.
perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' \
-- make -s -j64 O=defconfig-build/ bzImage
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/1350992414.13456.5.camel@twins
[ committer note: Added respective entries in Documentation/perf-stat.txt ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Vagin [Tue, 7 Aug 2012 12:56:05 +0000 (16:56 +0400)]
perf inject: Mark a dso if it's used
Otherwise they will be not written in an output file.
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-5-git-send-email-avagin@openvz.org
[ committer note: Fixed up wrt changes made in the immediate previous patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Vagin [Tue, 7 Aug 2012 12:56:04 +0000 (16:56 +0400)]
perf inject: Merge sched_stat_* and sched_switch events
You may want to know where and how long a task is sleeping. A callchain
may be found in sched_switch and a time slice in stat_iowait, so I add
handler in perf inject for merging this events.
My code saves sched_switch event for each process and when it meets
stat_iowait, it reports the sched_switch event, because this event
contains a correct callchain. By another words it replaces all
stat_iowait events on proper sched_switch events.
I use the next sequence of commands for testing:
perf record -e sched:sched_stat_sleep -e sched:sched_switch \
-e sched:sched_process_exit -g -o ~/perf.data.raw \
~/test-program
perf inject -v -s -i ~/perf.data.raw -o ~/perf.data
perf report --stdio -i ~/perf.data
100.00% foo [kernel.kallsyms] [k] __schedule
|
--- __schedule
schedule
|
|--79.75%-- schedule_hrtimeout_range_clock
| schedule_hrtimeout_range
| poll_schedule_timeout
| do_select
| core_sys_select
| sys_select
| system_call_fastpath
| __select
| __libc_start_main
|
--20.25%-- do_nanosleep
hrtimer_nanosleep
sys_nanosleep
system_call_fastpath
__GI___libc_nanosleep
__libc_start_main
And here is test-program.c:
#include<unistd.h>
#include<time.h>
#include<sys/select.h>
int main()
{
struct timespec ts1;
struct timeval tv1;
int i;
long s;
for (i = 0; i < 10; i++) {
ts1.tv_sec = 0;
ts1.tv_nsec =
10000000;
nanosleep(&ts1, NULL);
tv1.tv_sec = 0;
tv1.tv_usec = 40000;
select(0, NULL, NULL, NULL,&tv1);
}
return 1;
}
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org
[ committer note: Made it use evsel->handler ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Vagin [Tue, 7 Aug 2012 12:56:02 +0000 (16:56 +0400)]
perf inject: Work with files
Before this patch "perf inject" can only handle data from pipe.
I want to use "perf inject" for reworking events. Look at my following patch.
v2: add information about new options in tools/perf/Documentation/
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-2-git-send-email-avagin@openvz.org
[ committer note: fixed it up to cope with
5852a44,
5ded57a,
002439e &
f62d3f0 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 26 Oct 2012 08:55:52 +0000 (17:55 +0900)]
perf tools: Fix LIBELF_MMAP checking
Currently checking mmap support in libelf failed due to wrong flags.
CHK libelf
CHK libdw
CHK libunwind
CHK -DLIBELF_MMAP
/tmp/ccYJwdR0.o: In function `main':
:(.text+0x18): undefined reference to `elf_begin'
collect2: error: ld returned 1 exit status
This cannot happen since we checked the elf_begin() when checking
libelf and it succeeded.
Fix it by using a same flag with libelf checking.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 26 Oct 2012 08:55:51 +0000 (17:55 +0900)]
perf tools: Always show CHK message when doing try-cc
It might be useful to see what's happening behind us rather than just
waiting few seconds during the config checking.
Also align the CHK message with other ones.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 26 Oct 2012 08:55:50 +0000 (17:55 +0900)]
perf tools: Convert invocation of MAKE into SUBDIR
This will show directory change info in a consistent form. Also it can
be converted again into David Howell's descend command.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 26 Oct 2012 08:55:49 +0000 (17:55 +0900)]
perf tools: Cleanup doc related targets
Documentation targets handling rules are duplicate. Consolidate them
with DOC_TARGETS and INSTALL_DOC_TARGETS.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 26 Oct 2012 08:55:48 +0000 (17:55 +0900)]
tools lib traceevent: Do not generate dependency for system header files
Ingo reported (again!) that 'make clean' on perf/traceevent does not
work due to some reason with system header file. Quotes Ingo:
"Note that the old dependency related build failure thought to be
fixed in commit
860df5833e46 is back:
make[1]: *** No rule to make target
`/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h', needed by `.trace-seq.d'. Stop.
'make clean' itself does not work in libtraceevent:
comet:~/tip/tools/lib/traceevent> make clean
make: *** No rule to make target `/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h', needed by `.trace-seq.d'. Stop.
So I had to clean it out manually:
comet:~/tip/tools/lib/traceevent> git ls-files --others | xargs rm
comet:~/tip/tools/lib/traceevent>
and then things build fine."
Try to fix it by excluding system headers from dependency generation.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1351241752-2919-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Fri, 26 Oct 2012 08:30:49 +0000 (10:30 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core trace improvements from Arnaldo Carvalho de Melo:
* Don't stop synthesizing threads when one vanishes, this is for
the existing threads when we start a tool like trace.
* Use sched:sched_stat_runtime to provide a thread summary, this
produces the same output as the 'trace summary' subcommand of
tglx's original "trace" tool.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Wed, 17 Oct 2012 20:13:12 +0000 (17:13 -0300)]
perf trace: Use sched:sched_stat_runtime to provide a thread summary
[root@sandy ~]# perf trace --sched --duration 0.100 --pid `pidof firefox`
<SNIP>
17079.847 ( 0.009 ms): 17643 poll(ufds:
140037623086496, nfds: 11, timeout_msecs: 0) = 0 Timeout
17079.892 ( 0.010 ms): 17643 read(fd: 4, buf:
140038178943092, count: 4096 ) = -1 EAGAIN Resource temporarily unavailable
17079.921 ( 0.013 ms): 17643 poll(ufds:
140037623086496, nfds: 11, timeout_msecs: 0) = 0 Timeout
17079.949 ( 0.009 ms): 17643 read(fd: 4, buf:
140038178943092, count: 4096 ) = -1 EAGAIN Resource temporarily unavailable
^C
_____________________________________________________________________
__) Summary of events (__
[ task - pid ] [ events ] [ ratio ] [ runtime ]
_____________________________________________________________________
firefox - 17643 : 18013 [ 72.2% ] 359.110 ms
firefox - 17663 : 41 [ 0.2% ] 21.439 ms
firefox - 17664 : 6840 [ 27.4% ] 133.642 ms
firefox - 17667 : 46 [ 0.2% ] 0.682 ms
[root@sandy ~]#
This is equivalent to the 'perf trace summary' subcomand in the tmp.perf/trace2
branch.
Another example, setting a huge duration filter to get just a system
wide summary:
[root@sandy ~]# perf trace --duration 10000.0 --sched
^C
_____________________________________________________________________
__) Summary of events (__
[ task - pid ] [ events ] [ ratio ] [ runtime ]
_____________________________________________________________________
scsi_eh_1 - 258 : 15 [ 0.0% ] 0.133 ms
kworker/0:1H - 322 : 13 [ 0.0% ] 0.032 ms
jbd2/dm-0-8 - 384 : 4 [ 0.0% ] 0.115 ms
flush-253:0 - 470 : 1 [ 0.0% ] 0.027 ms
firefox - 950 : 4783 [ 0.1% ] 24.863 ms
firefox - 992 : 1883 [ 0.1% ] 6.808 ms
firefox - 995 : 35 [ 0.0% ] 0.111 ms
ksoftirqd/6 - 4362 : 2 [ 0.0% ] 0.005 ms
ksoftirqd/7 - 4365 : 1 [ 0.0% ] 0.007 ms
Xorg - 4671 : 148 [ 0.0% ] 0.912 ms
gnome-settings- - 4846 : 14 [ 0.0% ] 0.086 ms
seahorse-daemon - 4847 : 14 [ 0.0% ] 0.092 ms
gnome-panel - 4875 : 46 [ 0.0% ] 0.159 ms
gnome-power-man - 4918 : 16 [ 0.0% ] 0.065 ms
gvfs-afc-volume - 4992 : 77 [ 0.0% ] 0.136 ms
gnome-screensav - 5114 : 24 [ 0.0% ] 0.128 ms
xchat - 8082 : 466 [ 0.0% ] 2.019 ms
synergyc - 8369 : 941 [ 0.0% ] 3.291 ms
synergyc - 8371 : 85 [ 0.0% ] 1.817 ms
jbd2/dm-4-8 - 9352 : 4 [ 0.0% ] 0.109 ms
rpcbind - 9786 : 3 [ 0.0% ] 0.017 ms
rtkit-daemon - 12802 : 10 [ 0.0% ] 0.038 ms
rtkit-daemon - 12803 : 8 [ 0.0% ] 0.000 ms
udisks-daemon - 13020 : 27 [ 0.0% ] 0.240 ms
kworker/7:0 - 14651 : 669 [ 0.0% ] 2.616 ms
kworker/5:1 - 16220 : 2 [ 0.0% ] 0.069 ms
kworker/4:0 - 19776 : 13 [ 0.0% ] 0.176 ms
openvpn - 20131 : 133 [ 0.0% ] 0.762 ms
plugin-containe - 20508 : 60658 [ 1.7% ] 131.153 ms
npviewer.bin - 20520 : 72208 [ 2.0% ] 138.945 ms
npviewer.bin - 20542 : 35 [ 0.0% ] 0.074 ms
npviewer.bin - 20543 : 30 [ 0.0% ] 0.074 ms
npviewer.bin - 20547 : 35 [ 0.0% ] 0.092 ms
npviewer.bin - 20552 : 35 [ 0.0% ] 0.093 ms
sshd - 20645 : 32 [ 0.0% ] 0.071 ms
npviewer.bin - 21053 : 35 [ 0.0% ] 0.074 ms
npviewer.bin - 21054 : 35 [ 0.0% ] 0.097 ms
kworker/0:2 - 21169 : 149 [ 0.0% ] 1.143 ms
kworker/3:0 - 22171 : 113 [ 0.0% ] 96.892 ms
flush-253:4 - 22410 : 1 [ 0.0% ] 0.028 ms
kworker/6:0 - 24581 : 25 [ 0.0% ] 0.275 ms
kworker/1:0 - 25572 : 4 [ 0.0% ] 0.103 ms
kworker/2:1 - 26299 : 138 [ 0.0% ] 1.440 ms
kworker/0:0 - 26325 : 1 [ 0.0% ] 0.003 ms
perf - 26330 :
3506967 [ 96.1% ] 6648.310 ms
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-mzuli0srnxyi1o029py6537x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 17 Oct 2012 20:09:46 +0000 (17:09 -0300)]
perf trace: Count number of events for each thread and globally
The nr_events in trace__run was local, but we will need it in other
trace methods, move it to struct trace.
We'll also need the number of events per thread, so introduce a
nr_events method for that in struct thread_trace.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ksutaz0mtejnf7e6az3ca1td@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 17 Oct 2012 21:50:13 +0000 (18:50 -0300)]
perf tools: Don't stop synthesizing threads when one vanishes
The perf_event__synthesize_threads routine synthesizes all the existing
threads in the system, because we don't have any kernel facilities to
ask for PERF_RECORD_{FORK,MMAP,COMM} for existing threads.
It was returning an error as soon as one thread couldn't be synthesized,
which is a bit extreme when, for instance, a forkish workload is
running, like a kernel compile.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i7oas1eodpoer2bx38fwyasv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Thu, 25 Oct 2012 07:42:03 +0000 (09:42 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Align the 'Ok'/'FAILED!' test results in 'perf test.
* Support interrupted syscalls in 'trace'
* Add an event duration column and filter in 'trace'.
* There are references to the man pages in some tools, so try to build
Documentation when installing, warning the user if that is not possible,
from Borislav Petkov.
* Give user better message if precise is not supported, from David Ahern.
* Try to find cross-built objdump path by using the session environment
information in the perf.data file header, from Irina Tirdea, original
patch and idea by Namhyung Kim.
* Diplays more output on features check for make V=1, so that one can figure
out what is happening by looking at gcc output, etc. From Jiri Olsa.
* Account the nr_entries in rblist properly, fix by Suzuki K. Poulose.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Borislav Petkov [Fri, 28 Sep 2012 17:47:07 +0000 (19:47 +0200)]
perf tools: Try to build Documentation when installing
There's a portion in the "perf list" output refering to the exact
specification of raw hardware events.
Since this description is in the perf-list manpage, try to build and
install the man pages, warning the user when that is not possible
due to missing packages (xmlto and asciidoc).
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-ij71ysszkdvz3fy3wr331bke@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 24 Oct 2012 20:44:13 +0000 (18:44 -0200)]
perf trace: Print the name of a syscall when failing to read its info
When failing to read the tracepoint event format, like currently with
sys_execve, that is not defined via SYSCALL_DEFINE macros and thus
doesn't have an entry in:
$ ls -d /sys/kernel/debug/tracing/events/syscalls/sys_enter_*exec*
/sys/kernel/debug/tracing/events/syscalls/sys_enter_kexec_load
$
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-`ranpwd
Link: http://lkml.kernel.org/n/tip-q3ak0j8b81yxylykq5wp2uwi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 18 Oct 2012 22:06:13 +0000 (19:06 -0300)]
perf tools: Pretty print errno for some more functions
This time: access, open and socket.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e19dmpz8zxqo2uebxnp7ilkf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 8 Oct 2012 12:56:00 +0000 (09:56 -0300)]
perf trace: Add duration filter
Example:
[acme@sandy linux]$ perf trace --duration 0.025 usleep 1
2.221 ( 0.958 ms): 6724 execve(arg0:
140733557168278, arg1:
140733557178768, arg2:
16134304, arg3:
140733557167840, arg4:
7955998171588342573, arg5: 6723) = -2
3.690 ( 1.443 ms): 6724 execve(arg0:
140733557168295, arg1:
140733557178768, arg2:
16134304, arg3:
140733557167840, arg4:
7955998171588342573, arg5: 6723) = 0
3.979 ( 0.048 ms): 6724 open(filename:
208733843841, flags: 0, mode: 1 ) = 3
4.071 ( 0.075 ms): 6724 open(filename:
139744419925673, flags: 0, mode: 0 ) = 3
4.318 ( 0.056 ms): 6724 nanosleep(rqtp:
140734030404608, rmtp: 0 ) = 0
[acme@sandy linux]$ perf trace --duration 0.100 usleep 1
1.143 ( 1.021 ms): 6726 execve(arg0:
140736323962279, arg1:
140736323972752, arg2:
34926752, arg3:
140736323961824, arg4:
7955998171588342573, arg5: 6725) = 0
[acme@sandy linux]$
Cherry picked from tmp.perf/trace2 branch.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-oslw2j2958we9qf0ctra4whd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 24 Oct 2012 19:24:47 +0000 (17:24 -0200)]
perf trace: Add an event duration column
# perf trace usleep 1 | tail -10
0.453 ( 0.002 ms): mmap(addr: 0, len: 4096, prot: 3, flags: 34, fd:
4294967295, off: 0 ) = -
763342848
0.456 ( 0.001 ms): mmap(addr: 0, len: 4096, prot: 3, flags: 34, fd:
4294967295, off: 0 ) = -
763346944
0.459 ( 0.001 ms): arch_prctl(option: 4098, arg2:
140126839658240, arg3:
140126839652352, arg4: 34, arg5:
4294967295) = 0
0.473 ( 0.003 ms): mprotect(start:
208741634048, len: 16384, prot: 1 ) = 0
0.477 ( 0.003 ms): mprotect(start:
208735956992, len: 4096, prot: 1 ) = 0
0.483 ( 0.004 ms): munmap(addr:
140126839664640, len: 91882 ) = 0
0.540 ( 0.001 ms): brk(brk: 0 ) =
31928320
0.542 ( 0.002 ms): brk(brk:
32063488 ) =
32063488
1.456 ( 0.901 ms): nanosleep(rqtp:
140735472817168, rmtp: 0 ) = 0
1.462 ( 0.000 ms): exit_group(error_code: 0
#
This also comes from the tmp.perf/trace2 branch.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-g9akh5hjw2kvjerpo9xror6f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 6 Oct 2012 21:43:19 +0000 (18:43 -0300)]
perf trace: Support interrupted syscalls
Using the same strategies as in the tmp.perf/trace2, i.e. the 'trace'
tool implemented by tglx, just updated to the current codebase.
Example:
[root@sandy linux]# perf trace usleep 1 | tail
2.003: mmap(addr: 0, len: 4096, prot: 3, flags: 34, fd:
4294967295, off: 0 ) = -
2128396288
2.017: mmap(addr: 0, len: 4096, prot: 3, flags: 34, fd:
4294967295, off: 0 ) = -
2128400384
2.029: arch_prctl(option: 4098, arg2:
140146949441280, arg3:
140146949435392, arg4: 34, arg5:
4294967295) = 0
2.084: mprotect(start:
208741634048, len: 16384, prot: 1 ) = 0
2.098: mprotect(start:
208735956992, len: 4096, prot: 1 ) = 0
2.122: munmap(addr:
140146949447680, len: 91882 ) = 0
2.359: brk(brk: 0 ) =
28987392
2.371: brk(brk:
29122560 ) =
29122560
2.490: nanosleep(rqtp:
140735694241504, rmtp: 0 ) = 0
2.507: exit_group(error_code: 0
[root@sandy linux]#
For now the timestamp and duration are always on, will be selectable.
Also if multiple threads are being monitored, its tid will appear.
The ret output continues to be interpreted a la strace.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ly9ulroru4my5isn0xe9gr0m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 24 Oct 2012 17:44:41 +0000 (15:44 -0200)]
perf test: Align the 'Ok'/'FAILED!' test results
And also print 'FAILED!' in red.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rkisq85w24il3e2yl3nzumhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 13 Sep 2012 20:59:15 +0000 (14:59 -0600)]
perf tools: Give user better message if precise is not supported
Platforms (e.g., VM's) without support for precise mode get a confusing
error message. e.g.,
$ perf record -e cycles:p -a -- sleep 1
Error: sys_perf_event_open() syscall returned with 95 (Operation not
supported). /bin/dmesg may provide additional information.
No hardware sampling interrupt available. No APIC? If so then you can
boot the kernel with the "lapic" boot parameter to force-enable it.
sleep: Terminated
which is not clear that precise mode might be the root problem. With this
patch:
$ perf record -e cycles:p -fo /tmp/perf.data -- sleep 1
Error:
'precise' request may not be supported. Try removing 'p' modifier
sleep: Terminated
v2: softened message to 'may not be' supported per Robert's suggestion
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/1347569955-54626-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suzuki K. Poulose [Fri, 31 Aug 2012 07:09:18 +0000 (12:39 +0530)]
Account the nr_entries in rblist properly
The nr_entries in rblist is never decremented when an element
is deleted. Also, use rblist__remove_node to delete a node in
rblist__delete(). This would keep the nr_entries sane.
Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com>
Acked-by: David S. Ahern <dsahern@gmail.com>
Cc: David S. Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20120831070834.14806.87398.stgit@suzukikp.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Irina Tirdea [Mon, 15 Oct 2012 23:33:38 +0000 (02:33 +0300)]
perf tools: Try to find cross-built objdump path
As we have architecture information of saved perf.data file, we can try
to find cross-built objdump path.
The triplets include support for Android (arm, x86 and mips
architectures).
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Originally-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1350344020-8071-5-git-send-email-irina.tirdea@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 9 Oct 2012 18:15:25 +0000 (15:15 -0300)]
perf tools: Remove noise in python version feature test
Now that the feature tests honours the V=1 make verbosity switch, add a
return to the main() routine in the python version test, to avoid this
distraction:
CHK python version
<stdin>: In function 'main':
<stdin>:5: warning: control reaches end of non-void function
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-999no5yxlc2oqo9xjeez5zmv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 9 Oct 2012 15:50:01 +0000 (17:50 +0200)]
perf tools: Diplays more output on features check for make V=1
Adding more verbose output for compile time features checking, to ease
up debuging of feature detection failures.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-fbjha6xs5soyaiek8j4142xg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Vrabel [Mon, 8 Oct 2012 12:07:30 +0000 (13:07 +0100)]
x86: Allow tracing of functions in arch/x86/kernel/rtc.c
Move native_read_tsc() to tsc.c to allow profiling to be
re-enabled for rtc.c.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1349698050-6560-1-git-send-email-david.vrabel@citrix.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Wed, 10 Oct 2012 12:53:18 +0000 (14:53 +0200)]
perf test: Add automated tests for pmu sysfs translated events
Add automated tests for all events found under PMU/events
directory. Tested events are in the 'cpu/event=xxx/u' format,
where 'xxx' is substituted by every event found.
The 'event=xxx' term is translated to the cpu specific term.
We only check that the event is created (not the real config
numbers) and that the modifier is properly set.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-9-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Wed, 10 Oct 2012 12:53:17 +0000 (14:53 +0200)]
perf tools: Add support to specify hw event as PMU event term
Add a way to specify hw event as PMU event term like:
'cpu/event=cpu-cycles/u'
'cpu/event=instructions,.../u'
'cpu/cycles,.../u'
The 'event=cpu-cycles' term is replaced/translated by the hw events
term translation, which is exposed by sysfs 'events' group attribute.
Add parser bits, the rest is already handled by the PMU alias code.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-8-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Wed, 10 Oct 2012 12:53:16 +0000 (14:53 +0200)]
perf tools: Fix PMU object alias initialization
The pmu_lookup should return pmus that do not expose the 'events'
group attribute in sysfs. Also it should fail when any other error
during 'events' lookup is hit (pmu_aliases fails).
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-7-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Wed, 10 Oct 2012 12:53:15 +0000 (14:53 +0200)]
perf/x86: Add hardware events translations for Intel P6 cpus
Add support for Intel P6 processors to display 'events' sysfs
directory (/sys/devices/cpu/events/) with hw event translations:
# ls /sys/devices/cpu/events/
branch-instructions
branch-misses
bus-cycles
cache-misses
cache-references
cpu-cycles
instructions
ref-cycles
stalled-cycles-backend
stalled-cycles-frontend
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-6-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Wed, 10 Oct 2012 12:53:14 +0000 (14:53 +0200)]
perf/x86: Add hardware events translations for AMD cpus
Add support for AMD processors to display 'events' sysfs
directory (/sys/devices/cpu/events/) with hw event translations:
# ls /sys/devices/cpu/events/
branch-instructions
branch-misses
bus-cycles
cache-misses
cache-references
cpu-cycles
instructions
ref-cycles
stalled-cycles-backend
stalled-cycles-frontend
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-5-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Wed, 10 Oct 2012 12:53:13 +0000 (14:53 +0200)]
perf/x86: Add hardware events translations for Intel cpus
Add support for Intel processors to display 'events' sysfs
directory (/sys/devices/cpu/events/) with hw event translations:
# ls /sys/devices/cpu/events/
branch-instructions
branch-misses
bus-cycles
cache-misses
cache-references
cpu-cycles
instructions
ref-cycles
stalled-cycles-backend
stalled-cycles-frontend
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-4-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Wed, 10 Oct 2012 12:53:12 +0000 (14:53 +0200)]
perf/x86: Filter out undefined events from sysfs events attribute
The sysfs events group attribute currently shows all hw events,
including also undefined ones.
This patch filters out all undefined events out of the sysfs events
group attribute, so they don't even show up.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-3-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Wed, 10 Oct 2012 12:53:11 +0000 (14:53 +0200)]
perf/x86: Make hardware event translations available in sysfs
Add support to display hardware events translations available
through the sysfs. Add 'events' group attribute under the sysfs
x86 PMU record with attribute/file for each hardware event.
This patch adds only backbone for PMUs to display config under
'events' directory. The specific PMU support itself will come
in next patches, however this is how the sysfs group will look
like:
# ls /sys/devices/cpu/events/
branch-instructions
branch-misses
bus-cycles
cache-misses
cache-references
cpu-cycles
instructions
ref-cycles
stalled-cycles-backend
stalled-cycles-frontend
The file - hw event ID mapping is:
file hw event ID
---------------------------------------------------------------
cpu-cycles PERF_COUNT_HW_CPU_CYCLES
instructions PERF_COUNT_HW_INSTRUCTIONS
cache-references PERF_COUNT_HW_CACHE_REFERENCES
cache-misses PERF_COUNT_HW_CACHE_MISSES
branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS
branch-misses PERF_COUNT_HW_BRANCH_MISSES
bus-cycles PERF_COUNT_HW_BUS_CYCLES
stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND
ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES
Each file in the 'events' directory contains the term translation
for the symbolic hw event for the currently running cpu model.
# cat /sys/devices/cpu/events/stalled-cycles-backend
event=0xb1,umask=0x01,inv,cmask=0x01
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Wed, 24 Oct 2012 08:20:57 +0000 (10:20 +0200)]
Merge branch 'perf/urgent' into perf/core
Pick up v3.7-rc2 and fixes before applying more patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Srivatsa S. Bhat [Tue, 16 Oct 2012 07:58:17 +0000 (13:28 +0530)]
perf, cpu hotplug: Use cached value of smp_processor_id()
The perf_cpu_notifier() macro invokes smp_processor_id()
multiple times. Optimize it by using a local variable.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: peterz@infradead.org
Cc: acme@ghostprotocols.net
Link: http://lkml.kernel.org/r/20121016075817.3572.76733.stgit@srivatsabhat.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Srivatsa S. Bhat [Tue, 16 Oct 2012 07:58:10 +0000 (13:28 +0530)]
perf, cpu hotplug: Run CPU_STARTING notifiers with irqs disabled
The CPU_STARTING notifiers are supposed to be run with irqs
disabled. But the perf_cpu_notifier() macro invokes them without
doing that. Fix it.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: peterz@infradead.org
Cc: acme@ghostprotocols.net
Link: http://lkml.kernel.org/r/20121016075809.3572.47848.stgit@srivatsabhat.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andre Przywara [Tue, 9 Oct 2012 15:38:35 +0000 (17:38 +0200)]
x86/perf: Fix virtualization sanity check
In check_hw_exists() we try to detect non-emulated MSR accesses
by writing an arbitrary value into one of the PMU registers
and check if it's value after a readout is still the same.
This algorithm silently assumes that the register does not contain
the magic value already, which is wrong in at least one situation.
Fix the algorithm to really do a read-modify-write cycle. This fixes
a warning under Xen under some circumstances on AMD family 10h CPUs.
The reasons in more details actually sound like a story from
Believe It or Not!:
First you need an AMD family 10h/12h CPU. These do not reset the
PERF_CTR registers on a reboot.
Now you boot bare metal Linux, which goes successfully through this
check, but leaves the magic value of 0xabcd in the register. You
don't use the performance counters, but do a reboot (warm reset).
Then you choose to boot Xen. The check will be triggered with a
recent Linux kernel as Dom0 again, trying to write 0xabcd into the
MSR. Xen silently drops the write (expected), but the subsequent read
will return the value in the register, which just happens to be the
expected magic value. Thus the test misleadingly succeeds, leaving
the kernel in the belief that the PMU is available. This will trigger
the following message:
[ 0.020294] ------------[ cut here ]------------
[ 0.020311] WARNING: at arch/x86/xen/enlighten.c:730 xen_apic_write+0x15/0x17()
[ 0.020318] Hardware name: empty
[ 0.020323] Modules linked in:
[ 0.020334] Pid: 1, comm: swapper/0 Not tainted 3.3.8 #7
[ 0.020340] Call Trace:
[ 0.020354] [<
ffffffff81050379>] warn_slowpath_common+0x80/0x98
[ 0.020369] [<
ffffffff810503a6>] warn_slowpath_null+0x15/0x17
[ 0.020378] [<
ffffffff810034df>] xen_apic_write+0x15/0x17
[ 0.020392] [<
ffffffff8101cb2b>] perf_events_lapic_init+0x2e/0x30
[ 0.020410] [<
ffffffff81ee4dd0>] init_hw_perf_events+0x250/0x407
[ 0.020419] [<
ffffffff81ee4b80>] ? check_bugs+0x2d/0x2d
[ 0.020430] [<
ffffffff81002181>] do_one_initcall+0x7a/0x131
[ 0.020444] [<
ffffffff81edbbf9>] kernel_init+0x91/0x15d
[ 0.020456] [<
ffffffff817caaa4>] kernel_thread_helper+0x4/0x10
[ 0.020471] [<
ffffffff817c347c>] ? retint_restore_args+0x5/0x6
[ 0.020481] [<
ffffffff817caaa0>] ? gs_change+0x13/0x13
[ 0.020500] ---[ end trace
a7919e7f17c0a725 ]---
The new code will change every of the 16 low bits read from the
register and tries to write and read-back that modified number
from the MSR.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Link: http://lkml.kernel.org/r/1349797115-28346-2-git-send-email-andre.przywara@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Wed, 24 Oct 2012 05:47:40 +0000 (07:47 +0200)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Validate syscall id before growing syscall table in 'trace', fixing potential
excessive memory usage.
* Validate perf_sample.raw_data, making 'trace' more robust, avoiding some
potential SEGFAULTs when reading tracepoint fields.
* Fix exclude_guest parse events 'perf test's, from Jiri Olsa.
* Do not flush maps on COMM, that is sent by the kernel when a process is
exec'ed, but also when a process changes its name. Since we were assuming
a COMM always meant an EXEC, we were losing track of a process maps by
flushing its maps. Fix from Luigi Semenzato.
* A recent patch introduced a problem by not initializing what should be
the first kind of pager to use, 'man', instead it was being left as zero
which means no pager. This caused 'perf subcmd --help' to produce no output.
Fix from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Wed, 24 Oct 2012 02:17:27 +0000 (05:17 +0300)]
Merge tag 'stable/for-linus-3.7-rc2-tag' of git://git./linux/kernel/git/konrad/xen
Pull xen bug-fixes from Konrad Rzeszutek Wilk:
- Fix mysterious SIGSEGV or SIGKILL in applications due to corrupting
of the %eip when returning from a signal handler.
- Fix various ARM compile issues after the merge fallout.
- Continue on making more of the Xen generic code usable by ARM
platform.
- Fix SR-IOV passthrough to mirror multifunction PCI devices.
- Fix various compile warnings.
- Remove hypercalls that don't exist anymore.
* tag 'stable/for-linus-3.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: dbgp: Fix warning when CONFIG_PCI is not enabled.
xen: arm: comment on why 64-bit xen_pfn_t is safe even on 32 bit
xen: balloon: use correct type for frame_list
xen/x86: don't corrupt %eip when returning from a signal handler
xen: arm: make p2m operations NOPs
xen: balloon: don't include e820.h
xen: grant: use xen_pfn_t type for frame_list.
xen: events: pirq_check_eoi_map is X86 specific
xen: XENMEM_translate_gpfn_list was remove ages ago and is unused.
xen: sysfs: fix build warning.
xen: sysfs: include err.h for PTR_ERR etc
xen: xenbus: quirk uses x86 specific cpuid
xen PV passthru: assign SR-IOV virtual functions to separate virtual slots
xen/xenbus: Fix compile warning.
xen/x86: remove duplicated include from enlighten.c
Al Viro [Sat, 20 Oct 2012 14:52:23 +0000 (15:52 +0100)]
alpha: separate thread-synchronous flags
... and fix the race in updating unaligned control ones
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 24 Oct 2012 01:08:42 +0000 (04:08 +0300)]
Merge tag 'kvm-3.7-2' of git://git./virt/kvm/kvm
Pull kvm fixes from Avi Kivity:
"KVM updates for 3.7-rc2"
* tag 'kvm-3.7-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM guest: exit idleness when handling KVM_PV_REASON_PAGE_NOT_PRESENT
KVM: apic: fix LDR calculation in x2apic mode
KVM: MMU: fix release noslot pfn
Linus Torvalds [Wed, 24 Oct 2012 01:07:51 +0000 (04:07 +0300)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Most of these are uprobes race fixes from Oleg, and their preparatory
cleanups. (It's larger than what I'd normally send for an -rc kernel,
but they looked significant enough to not delay them.)
There's also an oprofile fix and an uncore PMU fix."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
perf/x86: Disable uncore on virtualized CPUs
oprofile, x86: Fix wrapping bug in op_x86_get_ctrl()
ring-buffer: Check for uninitialized cpu buffer before resizing
uprobes: Fix the racy uprobe->flags manipulation
uprobes: Fix prepare_uprobe() race with itself
uprobes: Introduce prepare_uprobe()
uprobes: Fix handle_swbp() vs unregister() + register() race
uprobes: Do not delete uprobe if uprobe_unregister() fails
uprobes: Don't return success if alloc_uprobe() fails
uprobes/x86: Only rep+nop can be emulated correctly
uprobes: Simplify is_swbp_at_addr(), remove stale comments
uprobes: Kill set_orig_insn()->is_swbp_at_addr()
uprobes: Introduce copy_opcode(), kill read_opcode()
uprobes: Kill set_swbp()->is_swbp_at_addr()
uprobes: Restrict valid_vma(false) to skip VM_SHARED vmas
uprobes: Change valid_vma() to demand VM_MAYEXEC rather than VM_EXEC
uprobes: Change write_opcode() to use FOLL_FORCE
uprobes: Move clear_thread_flag(TIF_UPROBE) to uprobe_notify_resume()
uprobes: Kill UTASK_BP_HIT state
uprobes: Fix UPROBE_SKIP_SSTEP checks in handle_swbp()
...
Linus Torvalds [Wed, 24 Oct 2012 01:07:02 +0000 (04:07 +0300)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core kernel fixes from Ingo Molnar:
"Two small fixes"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: Reflect the new location of the NMI watchdog info
nohz: Fix idle ticks in cpu summary line of /proc/stat
Linus Torvalds [Wed, 24 Oct 2012 01:05:56 +0000 (04:05 +0300)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Among the usual minor bug fixes the more interesting patches are the
perf counters for the latest machine, the missing select to enable
transparent huge pages and a build fix for the UAPI rework."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390,uapi: do not use uapi/asm-generic/kvm_para.h
s390/cache: fix data/instruction cache output
s390: fix linker script for 31 bit builds
s390/thp: select HAVE_ARCH_TRANSPARENT_HUGEPAGE
s390/kdump: Use 64 bit mode for 0x10000 entry point
perf_cpum_cf: Add support for counters available with IBM zEC12
s390/css: stop stsch loop after cc 3
s390/cio: use generic bitmap functions
s390/chpid: make headers usable (again)
Linus Torvalds [Wed, 24 Oct 2012 01:05:15 +0000 (04:05 +0300)]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile
Pull tile fixes from Chris Metcalf:
"This fixes one issue with compiler flags that can cause modules not to
load, and cleans up some warnings with ELF_R_xxx defines."
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: avoid build warnings from duplicate ELF_R_xxx #defines
arch/tile: avoid generating .eh_frame information in modules
Linus Torvalds [Wed, 24 Oct 2012 01:03:21 +0000 (04:03 +0300)]
Merge tag 'please-pull-uapi-fix' of git://git./linux/kernel/git/aegl/linux
Pull ia64 fix from Tony Luck:
"Fix from dhowells for UAPI fallout"
* tag 'please-pull-uapi-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
UAPI: Make arch/ia64/include/asm/kvm_para.h generic
Chris Metcalf [Fri, 19 Oct 2012 20:29:43 +0000 (16:29 -0400)]
arch/tile: avoid build warnings from duplicate ELF_R_xxx #defines
These are now provided in <asm-generic/module.h>, so clean up warnings
by not re-defining them in module.c.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Chris Metcalf [Fri, 19 Oct 2012 15:43:11 +0000 (11:43 -0400)]
arch/tile: avoid generating .eh_frame information in modules
The tile tool chain uses the .eh_frame information for backtracing.
The vmlinux build drops any .eh_frame sections at link time, but when
present in kernel modules, it causes a module load failure due to the
presence of unsupported pc-relative relocations. When compiling to
use compiler feedback support, the compiler by default omits .eh_frame
information, so we don't see this problem. But when not using feedback,
we need to explicitly suppress the .eh_frame.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: stable@vger.kernel.org
Linus Torvalds [Tue, 23 Oct 2012 05:51:07 +0000 (08:51 +0300)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Fixes for intel and nouveau mainly.
- intel: disable HSW by default, sdvo fixes, link train regression
fix
- nouveau: acpi rom loading regression fix, with a few other fixes
from the rework
-core: just other minor fixes and race fixes for ttm."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits)
drm/ttm: Fix a theoretical race in ttm_bo_cleanup_refs()
drm/ttm: Fix a theoretical race
drm: platform: Don't initialize driver-private data
drm/debugfs: remove redundant info from gem_names
drm: fb: cma: Fail gracefully on allocation failure
drm: fb: cma: Fix typo in debug message
drm/nouveau/clock: fix missing pll type/addr when matching default entry
drm/nouveau/fb: fix reporting of memory type on GF8+ IGPs
drm/nv41/vm: don't init hw pciegart on boards with agp bridge
drm/nouveau/bios: fetch full 4KiB block to determine ACPI ROM image size
drm/nouveau: validate vbios size
drm/nouveau: warn when trying to free mm which is still in use
drm/nouveau: fix nouveau_mm/nouveau_mm_node leak
drm/nouveau/bios: improve error handling when reading the vbios from ACPI
drm/nouveau: handle same-fb page flips
drm/i915: Initialize obj->pages before use by i915_gem_object_do_bit17_swizzle()
drm/i915: Add no-lvds quirk for Supermicro X7SPA-H
drm/i915: Insert i915_preliminary_hw_support variable.
drm/i915: shut up spurious WARN in the gtt fault handler
Revert "drm/i915: Try harder to complete DP training pattern 1"
...
Linus Torvalds [Tue, 23 Oct 2012 05:49:34 +0000 (08:49 +0300)]
Merge tag 'jfs-3.7-2' of git://github.com/kleikamp/linux-shaggy
Pull jfs fix from Dave Kleikamp:
"Bug fix: Fix FITRIM argument handling"
* tag 'jfs-3.7-2' of git://github.com/kleikamp/linux-shaggy:
jfs: Fix FITRIM argument handling
Linus Torvalds [Tue, 23 Oct 2012 05:48:26 +0000 (08:48 +0300)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4. The most serious of them fixes a security
bug (CVE-2012-4508) which leads to stale data exposure when we have
fallocate racing against writes to files undergoing delayed
allocation. We also have two fixes for the metadata checksum feature,
the most serious of which can cause the superblock to have a invalid
checksum after a power failure."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Avoid underflow in ext4_trim_fs()
ext4: Checksum the block bitmap properly with bigalloc enabled
ext4: fix undefined bit shift result in ext4_fill_flex_info
ext4: fix metadata checksum calculation for the superblock
ext4: race-condition protection for ext4_convert_unwritten_extents_endio
ext4: serialize fallocate with ext4_convert_unwritten_extents
Linus Torvalds [Tue, 23 Oct 2012 05:47:38 +0000 (08:47 +0300)]
Merge tag 'nfs-for-3.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Do not call pnfs_return_layout() from an rpciod context
- nfs4_ds_disconnect can cause Oopses. Kill it...
- Fix the return value for nfs_callback_start_svc
- Fix a number of compile warnings
* tag 'nfs-for-3.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix the return value for nfs_callback_start_svc
NFSv4.1: Declare osd_pri_2_pnfs_err(), objio_init_read/write to be static
NFSv4: fs/nfs/nfs4getroot.c needs to include "internal.h"
NFSv4.1: Use kcalloc() to allocate zeroed arrays instead of kzalloc()
NFSv4.1: Do not call pnfs_return_layout() from an rpciod context
NFSv4.1: Kill nfs4_ds_disconnect()
Linus Torvalds [Tue, 23 Oct 2012 05:39:38 +0000 (08:39 +0300)]
Merge tag 'regmap-fix-mmio' of git://git./linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"regmap: Fix for dependencies for MMIO
Trivial dependency issue, not noticed before as the only user of MMIO
also needs I2C."
* tag 'regmap-fix-mmio' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: select REGMAP if REGMAP_MMIO and REGMAP_IRQ enabled
Thomas Hellstrom [Mon, 22 Oct 2012 12:51:26 +0000 (12:51 +0000)]
drm/ttm: Fix a theoretical race in ttm_bo_cleanup_refs()
In theory, that function could release the lru lock between
checking for bo on ddestroy list and a successful reserve if the bo
was already reserved, and the function was called with waiting reserves
allowed.
However, all current reservers of a bo on the ddestroy list would
atomically take the bo off the list after a successful reserve so this
race should not have been hit, so no need to backport for stable.
This patch also fixes a case found by Maarten Lankhorst where
ttm_mem_evict_first called with no_wait_gpu would incorrectly
spin waiting for bo idle if trying to evict a busy buffer that
also sits on the ddestroy list.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Mon, 22 Oct 2012 12:51:25 +0000 (12:51 +0000)]
drm/ttm: Fix a theoretical race
The ttm_mem_evict_first function could theoretically drop the
lru lock without retrying if a reservation from off the LRU list
ended up waiting.
However, since currently there are no users that could cause a wait
in that situation so this is not suitable for stable
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thierry Reding [Mon, 15 Oct 2012 18:03:42 +0000 (18:03 +0000)]
drm: platform: Don't initialize driver-private data
Platform device drivers usually use the driver-private data for their
own purposes. Having it overwritten by drm_platform_init() is confusing
and error-prone.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Marcin Slusarz [Tue, 16 Oct 2012 21:47:35 +0000 (21:47 +0000)]
drm/debugfs: remove redundant info from gem_names
It's a relic of "drm: Convert proc files to seq_file and introduce debugfs",
which wrongly converted DRM_INFO + sprintf to 2 seq_printfs.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Gamari <bgamari@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thierry Reding [Sat, 20 Oct 2012 10:32:47 +0000 (10:32 +0000)]
drm: fb: cma: Fail gracefully on allocation failure
The drm_gem_cma_create() function never returns NULL but rather an error
encoded in the return value using the ERR_PTR() macro. Callers therefore
need to check for errors using the IS_ERR() macro. This change allows
drivers to handle contiguous DMA allocation failures gracefully.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thierry Reding [Sat, 20 Oct 2012 10:32:46 +0000 (10:32 +0000)]
drm: fb: cma: Fix typo in debug message
The debug message showing the resolution of a framebuffer to be
allocated is missing a closing parenthesis.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lukas Czerner [Mon, 22 Oct 2012 22:01:19 +0000 (18:01 -0400)]
ext4: Avoid underflow in ext4_trim_fs()
Currently if len argument in ext4_trim_fs() is smaller than one block,
the 'end' variable underflow. Avoid that by returning EINVAL if len is
smaller than file system block.
Also remove useless unlikely().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Sasha Levin [Fri, 19 Oct 2012 16:11:55 +0000 (12:11 -0400)]
KVM guest: exit idleness when handling KVM_PV_REASON_PAGE_NOT_PRESENT
KVM_PV_REASON_PAGE_NOT_PRESENT kicks cpu out of idleness, but we haven't
marked that spot as an exit from idleness.
Not doing so can cause RCU warnings such as:
[ 732.788386] ===============================
[ 732.789803] [ INFO: suspicious RCU usage. ]
[ 732.790032]
3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63 Tainted: G W
[ 732.790032] -------------------------------
[ 732.790032] include/linux/rcupdate.h:738 rcu_read_lock() used illegally while idle!
[ 732.790032]
[ 732.790032] other info that might help us debug this:
[ 732.790032]
[ 732.790032]
[ 732.790032] RCU used illegally from idle CPU!
[ 732.790032] rcu_scheduler_active = 1, debug_locks = 1
[ 732.790032] RCU used illegally from extended quiescent state!
[ 732.790032] 2 locks held by trinity-child31/8252:
[ 732.790032] #0: (&rq->lock){-.-.-.}, at: [<
ffffffff83a67528>] __schedule+0x178/0x8f0
[ 732.790032] #1: (rcu_read_lock){.+.+..}, at: [<
ffffffff81152bde>] cpuacct_charge+0xe/0x200
[ 732.790032]
[ 732.790032] stack backtrace:
[ 732.790032] Pid: 8252, comm: trinity-child31 Tainted: G W
3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63
[ 732.790032] Call Trace:
[ 732.790032] [<
ffffffff8118266b>] lockdep_rcu_suspicious+0x10b/0x120
[ 732.790032] [<
ffffffff81152c60>] cpuacct_charge+0x90/0x200
[ 732.790032] [<
ffffffff81152bde>] ? cpuacct_charge+0xe/0x200
[ 732.790032] [<
ffffffff81158093>] update_curr+0x1a3/0x270
[ 732.790032] [<
ffffffff81158a6a>] dequeue_entity+0x2a/0x210
[ 732.790032] [<
ffffffff81158ea5>] dequeue_task_fair+0x45/0x130
[ 732.790032] [<
ffffffff8114ae29>] dequeue_task+0x89/0xa0
[ 732.790032] [<
ffffffff8114bb9e>] deactivate_task+0x1e/0x20
[ 732.790032] [<
ffffffff83a67c29>] __schedule+0x879/0x8f0
[ 732.790032] [<
ffffffff8117e20d>] ? trace_hardirqs_off+0xd/0x10
[ 732.790032] [<
ffffffff810a37a5>] ? kvm_async_pf_task_wait+0x1d5/0x2b0
[ 732.790032] [<
ffffffff83a67cf5>] schedule+0x55/0x60
[ 732.790032] [<
ffffffff810a37c4>] kvm_async_pf_task_wait+0x1f4/0x2b0
[ 732.790032] [<
ffffffff81139e50>] ? abort_exclusive_wait+0xb0/0xb0
[ 732.790032] [<
ffffffff81139c25>] ? prepare_to_wait+0x25/0x90
[ 732.790032] [<
ffffffff810a3a66>] do_async_page_fault+0x56/0xa0
[ 732.790032] [<
ffffffff83a6a6e8>] async_page_fault+0x28/0x30
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Gleb Natapov [Sun, 14 Oct 2012 11:08:58 +0000 (13:08 +0200)]
KVM: apic: fix LDR calculation in x2apic mode
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Tue, 16 Oct 2012 12:07:03 +0000 (20:07 +0800)]
KVM: MMU: fix release noslot pfn
We can not directly call kvm_release_pfn_clean to release the pfn
since we can meet noslot pfn which is used to cache mmio info into
spte
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Jiri Olsa [Sat, 20 Oct 2012 16:29:34 +0000 (18:29 +0200)]
perf test: Fix exclude_guest parse events tests
Event parsing tests are broken by following commit:
perf tool: Precise mode requires exclude_guest
commit
1342798cc13e3b48d9b5738f0c8fa812ccea8101
Author: David Ahern <dsahern@gmail.com>
Date: Thu Sep 13 14:59:13 2012 -0600
which enables 'exclude_guest' modifier any time the 'precise'
modifier is detected.
Fixing related tests and adding special comment.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Luigi Semenzato [Tue, 21 Aug 2012 21:52:20 +0000 (14:52 -0700)]
perf tools: do not flush maps on COMM for perf report
This fixes a long-standing bug caused by the lack of separate COMM and EXEC
record types, which makes "perf report" lose track of symbols when a process
renames itself.
With this fix (suggested by Stephane Eranian), a COMM (rename) no longer
flushes the maps, which is the correct behavior. An EXEC also no longer
flushes the maps, but this doesn't matter because as new mappings are created
(for the executable and the libraries) the old mappings are automatically
removed. This is not by accident: the functionality is necessary because DLLs
can be explicitly loaded at any time with dlopen(), possibly on top of existing
text, so "perf report" handles correctly the clobbering of new mappings on top
of old ones.
An alternative patch (which I proposed earlier) would be to introduce a
separate PERF_RECORD_EXEC type, but it is a much larger change (about 300
lines) and is not necessary.
Signed-off-by: Luigi Semenzato <semenzato@chromium.org>
Tested-by: Stephane Eranian <eranian@google.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olofj@chromium.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Wilson <wilsons@start.ca>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Link: http://lkml.kernel.org/r/1345585940-6497-1-git-send-email-semenzato@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 22 Oct 2012 07:12:23 +0000 (16:12 +0900)]
perf help: Fix --help for builtins
It seems that commit
cc5848213329 ("perf help: Remove use of die and
handle errors") caused the problem - it changed the initial value of
'help_format' from HELP_FORMAT_MAN to HELP_FORMAT_NONE.
This broke the --help option for all builtins, that would produce no
output, while 'man perf-top' would work it MANPATH is properly setup.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87r4orj7zc.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dave Airlie [Mon, 22 Oct 2012 07:50:07 +0000 (17:50 +1000)]
Merge branch 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Fixes from Ben, off note:
ACPI ROM regression fix,
some IGP and AGP regressions fixes from rework fallout.
* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/clock: fix missing pll type/addr when matching default entry
drm/nouveau/fb: fix reporting of memory type on GF8+ IGPs
drm/nv41/vm: don't init hw pciegart on boards with agp bridge
drm/nouveau/bios: fetch full 4KiB block to determine ACPI ROM image size
drm/nouveau: validate vbios size
drm/nouveau: warn when trying to free mm which is still in use
drm/nouveau: fix nouveau_mm/nouveau_mm_node leak
drm/nouveau/bios: improve error handling when reading the vbios from ACPI
drm/nouveau: handle same-fb page flips
Randy Dunlap [Sun, 21 Oct 2012 01:59:31 +0000 (18:59 -0700)]
module_signing: fix printk format warning
Fix the warning:
kernel/module_signing.c:195:2: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
by using the proper 'z' modifier for printing a size_t.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 22 Oct 2012 05:54:24 +0000 (08:54 +0300)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
"Just the expected UAPI disintegration and the "new" kcmp syscall."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Wire up kcmp
m68k: Remove empty #ifdef/#else/#endif block
UAPI: (Scripted) Disintegrate arch/m68k/include/asm
Dmitry Torokhov [Mon, 22 Oct 2012 00:57:20 +0000 (17:57 -0700)]
Input: fix use-after-free introduced with dynamic minor changes
Commit
7f8d4cad1e4e ("Input: extend the number of event (and other)
devices") made evdev, joydev and mousedev to embed struct cdev into
their respective structures representing input devices.
Unfortunately character device structure may outlive the parent
structure unless we do not set it up as parent of character device so
that it will stay pinned until character device is freed.
Also, now that parent structure is pinned while character device exists
we do not need to pin and unpin it every time user opens or closes it.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Torokhov [Mon, 22 Oct 2012 00:57:19 +0000 (17:57 -0700)]
char_dev: pin parent kobject
In certain cases (for example when a cdev structure is embedded into
another object whose lifetime is controlled by a separate kobject) it is
beneficial to tie lifetime of another object to the lifetime of
character device so that related object is not freed until after
char_dev object is freed.
To achieve this let's pin kobject's parent when doing cdev_add() and
unpin when last reference to cdev structure is being released.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>