Stephan Wienczny [Tue, 10 Mar 2009 22:08:06 +0000 (19:08 -0300)]
V4L/DVB (10949): Add support for Terratec Cinergy HT PCI MKII
This patch adds support for Terratec Cinergy HT PCI MKII with card id 79.
Its more or less a copy of Pinnacle Hybrid PCTV.
Thanks to k1ngf1sher on forum.ubuntuusers.de for the idea to copy that card.
Signed-off-by: Stephan Wienczny <stephan@wienczny.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Matthias Schwarzott [Tue, 10 Mar 2009 16:55:14 +0000 (13:55 -0300)]
V4L/DVB (10948): flexcop-pci: Print a message in case the new stream watchdog detects a problem
Print a message in case the new software IRQ watchdog detects a problem.
I choose the info message category, this can be changed if not appropriate.
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Scott James Remnant [Mon, 2 Mar 2009 18:40:57 +0000 (15:40 -0300)]
V4L/DVB (10947): Auto-load videodev module when device opened.
The videodev module is missing the char-major-81-* alias that would
cause it to be auto-loaded when a device of that type is opened. This
patch adds the alias.
Signed-off-by: Scott James Remnant <scott@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexey Klimov [Tue, 10 Mar 2009 08:14:00 +0000 (05:14 -0300)]
V4L/DVB (10946): radio-rtrack2: fix double mutex_unlock
Patch fixes double mutex unlocking.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Martin Fuzzey [Mon, 9 Mar 2009 23:16:00 +0000 (20:16 -0300)]
V4L/DVB (10945): pwc : fix LED and power setup for first open
Call pwc_construct before trying to talk to device to obtain vc interface so
that LED and power setup works the first time the video device is opened.
Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Robert Millan [Wed, 11 Mar 2009 11:18:53 +0000 (08:18 -0300)]
V4L/DVB (10944): Conceptronic CTVFMI2 PCI Id
My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch
that adds its PCI id.
lspci -nnv output:
05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
Press <break> within 3 seconds if this is wrong.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Sat, 7 Mar 2009 10:42:12 +0000 (07:42 -0300)]
V4L/DVB (10943): cx88: Prevent general protection fault on rmmod
When unloading the cx8800 driver I sometimes get a general protection
fault. Analysis revealed a race in cx88_ir_stop(). It can be solved by
using a delayed work instead of a timer for infrared input polling.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Sat, 7 Mar 2009 10:44:12 +0000 (07:44 -0300)]
V4L/DVB (10940): saa6588: Prevent general protection fault on rmmod
The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Sat, 7 Mar 2009 10:43:43 +0000 (07:43 -0300)]
V4L/DVB (10939): ir-kbd-i2c: Prevent general protection fault on rmmod
The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Sat, 7 Mar 2009 10:43:01 +0000 (07:43 -0300)]
V4L/DVB (10938): em28xx: Prevent general protection fault on rmmod
The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Wed, 11 Mar 2009 02:28:33 +0000 (23:28 -0300)]
V4L/DVB (10934): zoran: replace functions names in strings with __func__
It reduces the size of the driver over all, and the function names in
strings need to be manually kept up to date while __func__ doesn't.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Wed, 11 Mar 2009 02:28:31 +0000 (23:28 -0300)]
V4L/DVB (10933): zoran: Pass zoran_fh pointers instead of file pointers
Many functions had a struct file pointer argument, but all they wants is
the struct zoran_fh pointer from the file's private data. Since every
caller of those functions already has the zoran_fh, just pass the that
instead. This saves a dereference in each function change.
While I'm at it, change the code formatting of affected functions to be
kernel standard style.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Wed, 11 Mar 2009 02:28:20 +0000 (23:28 -0300)]
V4L/DVB (10932): zoran: Don't frighten users with failed buffer allocation
kmalloc() can fail for large video buffers. By default the kernel
complains loudly about allocation failures, but we don't want to
frighten the user, so ask kmalloc() to keep quiet on such failures.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Wed, 11 Mar 2009 02:28:17 +0000 (23:28 -0300)]
V4L/DVB (10931): zoran: Drop the lock_norm module parameter
The lock_norm module parameter doesn't look terribly useful. If you
don't want to change the norm, just don't change it. As a matter of
fact, no other v4l driver has such a parameter.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Wed, 11 Mar 2009 02:28:16 +0000 (23:28 -0300)]
V4L/DVB (10930): zoran: Unify buffer descriptors
The zoran driver had two kinds of buffer descriptors, one for jpg buffers
and one for raw buffers. They were mostly the same with only a couple
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 19 Jan 2009 04:12:55 +0000 (01:12 -0300)]
V4L/DVB (10927): dib0700: add support for Hauppauge ATSC MiniCard
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 19 Jan 2009 04:10:49 +0000 (01:10 -0300)]
V4L/DVB (10926): saa7134: enable digital tv support for Hauppauge WinTV-HVR1120
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Tue, 13 Jan 2009 07:40:36 +0000 (04:40 -0300)]
V4L/DVB (10925): add support for LG Electronics LGDT3305 ATSC/QAM-B Demodulator
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Tue, 13 Jan 2009 07:03:26 +0000 (04:03 -0300)]
V4L/DVB (10924): saa7134: enable serial transport streaming interface
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Tue, 10 Mar 2009 20:02:07 +0000 (17:02 -0300)]
V4L/DVB (10923): saa7134: fix typo in product name
replace occurances of "HVR1150" with "HVR1120" - this was a typo.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 10 Mar 2009 13:42:44 +0000 (10:42 -0300)]
V4L/DVB (10921): msp3400: remove obsolete V4L1 code
There are no drivers left that call msp3400 with V4L1 commands. Remove it
from this driver.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 8 Mar 2009 13:35:23 +0000 (10:35 -0300)]
V4L/DVB (10920): v4l2-ioctl: fix partial-copy code.
The code to optimize the usercopy only checked the ioctl NR field. However,
this code is also called for non-V4L2 ioctls (either private or ioctls from
linux/dvb/audio.h and linux/dvb/video.h for decoder drivers like ivtv).
If such an ioctl has the same NR as a V4L2 ioctl, then disaster strikes.
Modified the code to check on the full command ID.
Thanks to Martin Dauskardt for tracing the ivtv breakage to this particular
change.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 7 Mar 2009 16:10:43 +0000 (13:10 -0300)]
V4L/DVB (10919): tlv320aic23b: use v4l2-i2c-drv.h instead of drv-legacy.h
This driver isn't used in any legacy mode, so no need for v4l2-i2c-drv-legacy.h.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 13:15:01 +0000 (10:15 -0300)]
V4L/DVB (10914): v4l2: fix compile warnings when printing u64 value.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 12:58:12 +0000 (09:58 -0300)]
V4L/DVB (10912): vivi: fix compile warning.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 12:55:42 +0000 (09:55 -0300)]
V4L/DVB (10910): videodev2.h: remove deprecated VIDIOC_G_CHIP_IDENT_OLD
As announced VIDIOC_G_CHIP_IDENT_OLD is now removed for 2.6.30.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 12:29:09 +0000 (09:29 -0300)]
V4L/DVB (10909): tvmixer: remove last remaining references to this deleted module.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 10 Mar 2009 08:31:34 +0000 (05:31 -0300)]
V4L/DVB (10907): avoid loading the entire videodev.h header on V4L2 drivers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 10 Mar 2009 08:02:28 +0000 (05:02 -0300)]
V4L/DVB (10870a): remove all references for video_decoder.h
changeset
04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation
that were still using the V4L1 obsoleted header.
Now, video_decoder.h is not used anymore by any driver.
Let's remove it and all references for it in Kernel.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Tue, 10 Mar 2009 04:21:14 +0000 (01:21 -0300)]
V4L/DVB (10905): dib0700: enable DVB_FE_CUSTOMISE for dibcom frontends
There was never any build-time dependency of the dib0700 usb module on the
dib0070 tuner module. Now that the build-time dependencies of dib0700 on
dib3000mc, dib7000p and dib7000m have been removed in the previous changesets,
we can enable DVB_FE_CUSTOMISE for these modules under config DVB_USB_DIB0700
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 9 Mar 2009 05:39:58 +0000 (02:39 -0300)]
V4L/DVB (10904): remove dib0070_ctrl_agc_filter from dib0070.h
This function prototype is defined but the function itself does not exist.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Tue, 10 Mar 2009 03:53:57 +0000 (00:53 -0300)]
V4L/DVB (10903): cleanup linewraps in dib3000mc.h
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 9 Mar 2009 05:37:55 +0000 (02:37 -0300)]
V4L/DVB (10902): cleanup linewraps in dib7000m.h
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 9 Mar 2009 05:29:01 +0000 (02:29 -0300)]
V4L/DVB (10901): cleanup linewraps in dib7000p.h
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 9 Mar 2009 03:59:09 +0000 (00:59 -0300)]
V4L/DVB (10900): remove build-time dependencies on dib3000mc
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 9 Mar 2009 03:04:17 +0000 (00:04 -0300)]
V4L/DVB (10899): remove build-time dependencies on dib7000p
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 9 Mar 2009 03:03:25 +0000 (00:03 -0300)]
V4L/DVB (10898): remove build-time dependencies on dib7000m
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 10 Mar 2009 05:30:23 +0000 (02:30 -0300)]
V4L/DVB (10897): Fix Kbuild MEDIA_TUNER_CUSTOMIZE dependencies
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 10 Mar 2009 03:49:58 +0000 (00:49 -0300)]
V4L/DVB (10896): /frontends/Kconfig: Move af9013 Kconfig option to its proper place
af9013 is not a development tool. It is, instead, a DVB-T module.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 9 Mar 2009 11:11:21 +0000 (08:11 -0300)]
V4L/DVB (10894): ISA radio drivers: improve kernel log message
It's much nicer if the log message tells you which io ports are possible,
rather than having to run modinfo or look it up in the source or manual.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:55:34 +0000 (13:55 -0300)]
V4L/DVB (10893): radio-zoltrix: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:54:52 +0000 (13:54 -0300)]
V4L/DVB (10892): radio-typhoon: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:54:23 +0000 (13:54 -0300)]
V4L/DVB (10891): radio-trust: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:53:58 +0000 (13:53 -0300)]
V4L/DVB (10890): radio-terratec: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:53:26 +0000 (13:53 -0300)]
V4L/DVB (10889): radio-sf16fmr2: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:52:34 +0000 (13:52 -0300)]
V4L/DVB (10888): radio-sf16fmi: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:52:06 +0000 (13:52 -0300)]
V4L/DVB (10887): radio-rtrack2: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:51:33 +0000 (13:51 -0300)]
V4L/DVB (10886): radio-maxiradio: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:51:08 +0000 (13:51 -0300)]
V4L/DVB (10885): radio-maestro: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:50:42 +0000 (13:50 -0300)]
V4L/DVB (10884): radio-gemtek: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:50:07 +0000 (13:50 -0300)]
V4L/DVB (10883): radio-gemtek-pci: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:48:47 +0000 (13:48 -0300)]
V4L/DVB (10882): radio-cadet: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:48:18 +0000 (13:48 -0300)]
V4L/DVB (10881): radio-aztech: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 16:45:27 +0000 (13:45 -0300)]
V4L/DVB (10880): radio-aimslab: convert to v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 28 Feb 2009 20:45:17 +0000 (17:45 -0300)]
V4L/DVB (10877): saa7134: add analog support for Hauppauge HVR1110r3 boards
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Wed, 4 Mar 2009 22:42:06 +0000 (19:42 -0300)]
V4L/DVB (10876): tda18271: add support for AGC configuration via tuner callback
The tda827x driver supports a feature that the tda18271 driver was lacking
until now. This patch adds support for device-level configuration via the
tuner callback configuration interface.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 8 Mar 2009 13:19:44 +0000 (10:19 -0300)]
V4L/DVB (10874): w9968cf/ovcamchip: convert to v4l2_subdev.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 8 Mar 2009 09:56:19 +0000 (06:56 -0300)]
V4L/DVB (10873): w9968cf: add v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Fri, 6 Mar 2009 22:32:54 +0000 (19:32 -0300)]
V4L/DVB (10871): stv0900: delete debug messages not related to stv0900 tuning algorythm
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 10 Mar 2009 01:16:42 +0000 (22:16 -0300)]
V4L/DVB (10870): v4l2-ioctl: get rid of video_decoder.h
The V4L1 obsoleted header video_decoder.h is not used anymore by any driver. Only
a name decoding function at v4l2-ioctl still implements it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 6 Mar 2009 15:15:08 +0000 (12:15 -0300)]
V4L/DVB (10868): vino: add note that this conversion is untested.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Fri, 6 Mar 2009 15:05:43 +0000 (12:05 -0300)]
V4L/DVB (10867): vino: fold i2c-algo-sgi code into vino.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 18 Feb 2009 22:23:43 +0000 (19:23 -0300)]
V4L/DVB (10866): saa7191, indycam: remove compat code.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 18 Feb 2009 22:18:26 +0000 (19:18 -0300)]
V4L/DVB (10865): vino: convert to v4l2_subdev.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 18 Feb 2009 21:53:47 +0000 (18:53 -0300)]
V4L/DVB (10864): vino: introduce v4l2_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 13 Feb 2009 22:58:12 +0000 (19:58 -0300)]
V4L/DVB (10863): saa7191: convert to v4l2_subdev.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 13 Feb 2009 22:38:10 +0000 (19:38 -0300)]
V4L/DVB (10862): indycam: convert to v4l2_subdev
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 27 Feb 2009 12:05:10 +0000 (09:05 -0300)]
V4L/DVB (10861): vino/indycam/saa7191: convert to i2c modules to V4L2.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 13 Feb 2009 10:31:05 +0000 (07:31 -0300)]
V4L/DVB (10860): saa7191: convert to v4l2-i2c-drv-legacy.h
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 12 Feb 2009 14:31:13 +0000 (11:31 -0300)]
V4L/DVB (10859): vino: minor renames
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 12 Feb 2009 13:32:50 +0000 (10:32 -0300)]
V4L/DVB (10858): vino: convert to video_ioctl2.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Mon, 2 Mar 2009 02:10:07 +0000 (23:10 -0300)]
V4L/DVB (10856): cx18: Add interlock so sliced VBI insertion only happens for an MPEG PS
The cx18 private packet insertion code only expects to operate on an MPEG PS
when inserting private packets of sliced VBI data. This patch keeps the cx18
driver from corrupting the MPEG TS or other non-PS stream types, in case the
user enables sliced VBI insertion for these MPEG stream types.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 1 Mar 2009 02:06:08 +0000 (23:06 -0300)]
V4L/DVB (10855): cx18: Fix VPS service register codes
Based on a documentation clarification from Conexant, fix the register code
used for sliced VBI VPS service.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 28 Feb 2009 23:13:50 +0000 (20:13 -0300)]
V4L/DVB (10854): cx18: Correct comments about vertical and horizontal blanking timings
This change only affects comments.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 28 Feb 2009 21:48:27 +0000 (18:48 -0300)]
V4L/DVB (10853): cx18: Fix s-parse warnings and a logic error about extracting the VBI PTS
My s-parse builds never griped about be32_to_cpu() casting to __be32, but Hans'
builds did. This change explictly declares the pointer into the VBI buffer
header as __be32, which is the correct thing to do as the data is always
big endian when we go to fetch it. Hopefully this will quiet s-parse warnings.
Also corrected a misplaced parenthesis logic error in checking for the VBI
header magic number.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 28 Feb 2009 19:42:51 +0000 (16:42 -0300)]
V4L/DVB (10852): cx18: Include cx18-audio.h in cx18-audio.c to eliminate s-parse warning
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 28 Feb 2009 17:51:47 +0000 (14:51 -0300)]
V4L/DVB (10851): cx18: Fix a video scaling check problem introduced by sliced VBI changes
Fix a scaling check that was failing, due to a magic number I missed fixing
during previous slice VBI changes. Now
$ v4l2-ctl -v width=480,height=480,pixelformat=MPEG
yields proper visual results again.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 28 Feb 2009 16:19:45 +0000 (13:19 -0300)]
V4L/DVB (10850): cx18: Use strlcpy() instead of strncpy() for temp eeprom i2c_client setup
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Thu, 5 Mar 2009 11:02:05 +0000 (08:02 -0300)]
V4L/DVB (10848): zoran: Change first argument to zoran_v4l2_buffer_status
It was a struct file *, but all that function wants is the struct zoran_fh
from the file's private data. Since every caller already has this, just
pass the zoran_fh instead.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Randy Dunlap [Mon, 9 Mar 2009 02:01:08 +0000 (23:01 -0300)]
V4L/DVB (10846): dvb/frontends: fix duplicate 'debug' symbol
Fix dvb frontend debug variable to be static, to avoid linker
errors:
drivers/built-in.o:(.data+0xf4b0): multiple definition of `debug'
arch/x86/kernel/built-in.o:(.kprobes.text+0x90): first defined here
ld: Warning: size of symbol `debug' changed from 85 in arch/x86/kernel/built-in.o to 4 in drivers/built-in.o
It would also be Good if arch/x86/kernel/entry_32.S didn't have a
non-static 'debug' symbol. OTOH, it helps catch things like this one.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Sat, 28 Feb 2009 13:35:48 +0000 (10:35 -0300)]
V4L/DVB (10843): saa7146: Clean-up i2c error handling
saa7146: Clean-up i2c error handling
Simplify i2c error handling and fix incorrect handling of
address errors in poll mode.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Mar 2009 16:11:31 +0000 (13:11 -0300)]
V4L/DVB (10842): Adds some missing frontend selects for saa7134 and dvb-usb
Some dvb frontends are required on some boards, but those dependencies
were missed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Mar 2009 15:55:29 +0000 (12:55 -0300)]
V4L/DVB (10840): em28xx-dvb: Remove an unused header
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Mar 2009 11:02:53 +0000 (08:02 -0300)]
V4L/DVB (10838): get rid of the other occurrences of DVB_FE_CUSTOMIZE typo
There are still more places where DVB_FE_CUSTOMIZE is used, instead of
DVB_FE_CUSTOMISE.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 6 Mar 2009 11:31:39 +0000 (08:31 -0300)]
V4L/DVB (10837): Kconfig: only open the customise menu if selected
Instead of asking a lot of questions for the poor users, let's just hide
the frontend customise menu, if the user doesn't want to customise.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 6 Mar 2009 11:25:35 +0000 (08:25 -0300)]
V4L/DVB (10836): Kconfig: replace DVB_FE_CUSTOMIZE to DVB_FE_CUSTOMISE
The name of the option is DVB_FE_CUSTOMISE. However, on a few places, a wrong
name were used, due to a typo (DVB_FE_CUSTOMIZE).
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 6 Mar 2009 11:06:24 +0000 (08:06 -0300)]
V4L/DVB (10835): Kconfig: Add some missing selects for a required frontends
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Vitaly Wool [Wed, 4 Mar 2009 11:27:52 +0000 (08:27 -0300)]
V4L/DVB (10833): em28xx: enable Compro VideoMate ForYou sound
Compro VideoMate uses an external audio DSP chip, controlled via tvaudio
module (tda9874a). This patch improves em28xx infrastructure to support
an external audio processor and fixes the Compro VideoMate entry to work
with it.
Signed-off-by: Vitaly Wool <vital@embeddedalley.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Randy Dunlap [Wed, 4 Mar 2009 16:57:04 +0000 (13:57 -0300)]
V4L/DVB (10830): dm1105: uses ir_* functions, select VIDEO_IR
dm1105 uses the ir_*() functions, so it needs to select VIDEO_IR
to avoid build errors:
dm1105.c:(.text+0x26b7ac): undefined reference to `ir_input_keydown'
dm1105.c:(.text+0x26b7bc): undefined reference to `ir_input_nokey'
(.devinit.text+0x29982): undefined reference to `ir_codes_dm1105_nec'
(.devinit.text+0x2998a): undefined reference to `ir_input_init'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adam Baker [Tue, 3 Mar 2009 23:20:47 +0000 (20:20 -0300)]
V4L/DVB (10829): Support alternate resolutions for sq905
Add support for the alternate resolutions offered by SQ-905 based cameras. As
well as 320x240 all cameras can do 160x120 and some can do 640x480.
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Bruno Christo [Tue, 3 Mar 2009 01:38:59 +0000 (22:38 -0300)]
V4L/DVB (10827): Add support for GeoVision GV-800(S)
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips.
It has 16 video inputs and 4 audio inputs, and it is almost identical
to the GV-800, as seen on http://bttv-gallery.de .
The only difference appears to be the analog mux, it has a CD22M3494
in place of the MT8816AP. The card has a blue PCB, as seen in this
picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg .
This card wasn't originally supported, and it was detected as
UNKNOWN/GENERIC. The video inputs weren't working, so I tried
"forcing" a few cards like the GeoVision GV-600, but there was still
no video. So I made a patch to support this card, based on the Kodicom
4400r.
The GV-800(S) is identified as follows:
...
02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
...
02:00.0 0400: 109e:036e (rev 11)
Subsystem: 800a:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at
cdfff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:00.1 0480: 109e:0878 (rev 11)
Subsystem: 800a:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at
cdffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:04.0 0400: 109e:036e (rev 11)
Subsystem: 800b:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at
cdffd000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:04.1 0480: 109e:0878 (rev 11)
Subsystem: 800b:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at
cdffc000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:08.0 0400: 109e:036e (rev 11)
Subsystem: 800c:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at
cdffb000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:08.1 0480: 109e:0878 (rev 11)
Subsystem: 800c:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at
cdffa000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:0c.0 0400: 109e:036e (rev 11)
Subsystem: 800d:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at
cdff9000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:0c.1 0480: 109e:0878 (rev 11)
Subsystem: 800d:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at
cdff8000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
As you can see, the GV-800(S) card is almost identical to the GV-800
on bttv-gallery, so this patch might also work for that card. If not,
only a few changes should be required on the gv800s_write() function.
After this patch, the video inputs work correctly on linux 2.6.24 and
2.6.27 using the software 'motion'. The input order may seem a little
odd, but it's the order the original software/driver uses, and I decided
to keep that order to get the most out of the card.
I tried to get the audio working with the snd-bt87x module, but I only
get noise from every audio input, even after selecting a different mux
with alsamixer. Also, after trying to play sound from those sources, I
randomly get a RISC error about an invalid RISC opcode, and then that
output stops working. I also can't change the sampling rate when
recording. Any pointers to adding audio support are welcome.
Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik S. Beiser [Sun, 1 Mar 2009 01:29:20 +0000 (22:29 -0300)]
V4L/DVB (10826): cx88: Add IR support to pcHDTV HD3000 & HD5500
cx88: Add IR support to pcHDTV HD3000 & HD5500
Signed-off-by: Erik S. Beiser <erikb@bu.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pascal Terjan [Thu, 26 Feb 2009 13:31:41 +0000 (10:31 -0300)]
V4L/DVB (10825): Add ids for Yuan PD378S DVB adapter
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
[mchehab@redhat.com: Fixed a small merge conflict]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
sebastian.blanes@gmail.com [Tue, 24 Feb 2009 17:51:43 +0000 (14:51 -0300)]
V4L/DVB (10824): Add "Sony PlayTV" to dibcom driver
This patch introduces support for DVB-T for the following dibcom based card:
Sony PlayTV (USB-ID: 1415:0003)
Signed-off-by: Sebastián Blanes <sebastian.blanes@gmail.com>
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Matthias Schwarzott [Tue, 24 Feb 2009 15:35:16 +0000 (12:35 -0300)]
V4L/DVB (10823): saa7134: add DVB support for Avermedia A700 cards
Add DVB support for Avermedia DVB-S Pro and
Avermedia DVB-S Hybrid+FM card both labled A700.
They use zl10313 demod (driver mt312) and zl10036 tuner.
[mchehab@redhat.com: change __FUNCTION__ into __func__]
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Matthias Schwarzott [Tue, 24 Feb 2009 15:35:15 +0000 (12:35 -0300)]
V4L/DVB (10822): Add support for Zarlink ZL10036 DVB-S tuner.
This driver is based on initial work by Tino Reichardt and was heavily changed.
The datasheet of the zl10036 can be found here and on other places on the net:
http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf
The zl10038 is similar to the zl10036, so it is maybe possible to write a common
driver of necessary.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10820): meye: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from querycap, enum_input, enum_fmt_vid_cap, and
g_fmt_vid_cap.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10819): gspca: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from g_audio, enum_input, g_parm and gmbuf.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10818): usbvision: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from g_audio, queryctrl, and enum_fmt_vid_cap.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10817): stkwebcam: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from enum_fmt_vid_cap, g_fmt_vid_cap, and g_parm.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / openwrt / staging / blogic.git / log