Jammy Zhou [Fri, 8 May 2015 14:18:47 +0000 (22:18 +0800)]
drm/amdgpu: check context id for context switching (v2)
check the filp is not robust, and sometimes different contexts may
have same filp value.
v2: check both filp and ctx_id
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Jammy Zhou [Fri, 8 May 2015 09:29:40 +0000 (17:29 +0800)]
drm/amdgpu: add ctx_id to the WAIT_CS IOCTL (v4)
It is required to support fence per context.
v2: add amdgpu_ctx_get/put
v3: improve get/put
v4: squash hlock fix
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Jack Xiao [Fri, 8 May 2015 06:46:49 +0000 (14:46 +0800)]
drm/amdgpu: allow unaligned memory access (v2)
Set up the CP and SDMA for proper unaligned memory access.
Required for OpenCL 2.x
v2: udpate commit message
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Marek Olšák [Tue, 5 May 2015 18:52:00 +0000 (20:52 +0200)]
drm/amdgpu: make the CTX ioctl thread-safe
The existing locks were protecting the list, but not the elements.
v2: rename hlock to lock
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Marek Olšák [Mon, 4 May 2015 22:56:45 +0000 (00:56 +0200)]
drm/amdgpu: remove unsafe context releasing
If ctx was released between put and get, then "get" would crash.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Christian König [Mon, 4 May 2015 11:20:36 +0000 (13:20 +0200)]
drm/amdgpu: fix userptr lockup
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
monk.liu [Thu, 7 May 2015 18:19:18 +0000 (14:19 -0400)]
drm/amdgpu: fix userptr BO unpin bug (v2)
sg could point to array of contigiouse page*, only free page could lead
to memory leak.
v2: use iterator
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jammy Zhou [Wed, 6 May 2015 10:44:29 +0000 (18:44 +0800)]
drm/amdgpu: remove AMDGPU_GEM_CREATE_CPU_GTT_UC
This flag isn't used by user mode drivers, remove it to avoid
confusion. And rename GTT_WC to GTT_USWC to make it clear.
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Sonny Jiang [Thu, 30 Apr 2015 21:12:14 +0000 (17:12 -0400)]
drm/amdgpu fix amdgpu.dpm=0 (v2)
Fix crash when disabling dpm.
v2: agd5f: fix coding style, cleanup commit message
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 30 Apr 2015 15:47:03 +0000 (11:47 -0400)]
drm/amdgpu: memset gds_info struct in info ioctl
Avoids possibility that info may leak via the uninitialized
_pad element.
Noticed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 30 Apr 2015 15:42:54 +0000 (11:42 -0400)]
drm/amdgpu: fix error handling in cz_dpm_hw_fini/cz_dpm_suspend
Need to unlock the mutex on error.
Noticed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
monk.liu [Mon, 27 Apr 2015 02:38:16 +0000 (10:38 +0800)]
drm/amdgpu: let bo_list handler start from 1
this could prevent mis-understanding, because libdrm side will consider
no bo_list created if handleis zero
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
monk.liu [Mon, 27 Apr 2015 07:19:20 +0000 (15:19 +0800)]
drm/amdgpu: fix bug occurs when bo_list is NULL
Still need to handle ibs BO and validate them even bo_list is NULL
Signed-off-by: Monk.Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Mon, 27 Apr 2015 05:45:40 +0000 (13:45 +0800)]
drm/amdgpu: fix error check issue in amdgpu_mn_invalidate_range_start
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 22 Apr 2015 18:00:49 +0000 (14:00 -0400)]
drm/amdgpu: drop ttm two ended allocation
amdgpu_bo_create() calls amdgpu_ttm_placement_from_domain()
before ttm_bo_init() is called. amdgpu_ttm_placement_from_domain()
uses the ttm bo size to determine when to select top down
allocation but since the ttm bo is not initialized yet the
check is always false. It only took affect when buffers
were validated later. It also seemed to regress suspend
and resume on some systems possibly due to it not
taking affect in amdgpu_bo_create().
amdgpu_bo_create() and amdgpu_ttm_placement_from_domain()
need to be reworked substantially for this to be optimally
effective. Re-enable it at that point.
Ported from radeon commit:
a239118a24b3bf9089751068e431dfb63dc4168b
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Alex Deucher [Mon, 20 Apr 2015 21:37:54 +0000 (17:37 -0400)]
drm/amdgpu: add VI pci ids
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 21:36:52 +0000 (17:36 -0400)]
drm/amdgpu: add CIK pci ids
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 21:31:14 +0000 (17:31 -0400)]
drm/amdgpu: Add initial VI support
This adds initial support for VI asics. This
includes Iceland, Tonga, and Carrizo. Our inital
focus as been Carrizo, so there are still gaps in
support for Tonga and Iceland, notably power
management.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 21:09:27 +0000 (17:09 -0400)]
drm/amdgpu: Add support for CIK parts
This patch adds support for CIK parts. These parts
are also supported by radeon which is the preferred
option, so there is a config option to enable support
for CIK parts in amdgpu for testing.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 17 Apr 2015 14:50:02 +0000 (10:50 -0400)]
drm/amdgpu: Do not directly dereference pointers to BIOS area.
Use readb() and memcpy_fromio() accessors instead.
Ported from radeon commit:
f2c9e560b406f2f6b14b345c7da33467dee9cdf2
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:48:09 +0000 (15:48 -0400)]
drm/amdgpu: fix const warnings in amdgpu_connectors.c
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 20:55:21 +0000 (16:55 -0400)]
drm/amdgpu: add core driver (v4)
This adds the non-asic specific core driver code.
v2: remove extra kconfig option
v3: implement minor fixes from Fengguang Wu
v4: fix cast in amdgpu_ucode.c
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 20:51:00 +0000 (16:51 -0400)]
drm/amdgpu: add amdgpu.h (v2)
This is the main header file for amdgpu.
v2: remove stable comments
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 20:49:21 +0000 (16:49 -0400)]
drm/amdgpu: add amdgpu_family.h
This header defines asic families and attributes.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 20:48:06 +0000 (16:48 -0400)]
drm/amdgpu: add ppsmc.h
This header provides the smc message interface for the driver.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 20:46:13 +0000 (16:46 -0400)]
drm/amdgpu: add clearstate_defs.h
This header provides for format for the GCA blocks
clear state (i.e., default state). Each GCA version
has a specific clear state.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 20:44:53 +0000 (16:44 -0400)]
drm/amdgpu: add atombios headers
These headers define the atombios table structure and
driver interface.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 20 Apr 2015 20:42:01 +0000 (16:42 -0400)]
drm/amdgpu: add amdgpu uapi header (v4)
This header defines the ioctl interface to the driver.
v2: remove stale tiling defines
v3: add appropriate padding
v4: remove executable bits on header
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:36:06 +0000 (15:36 -0400)]
drm/amdgpu: add VCE 3.0 register headers
These are register headers for the VCE (Video Codec Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:35:39 +0000 (15:35 -0400)]
drm/amdgpu: add VCE 2.0 register headers
These are register headers for the VCE (Video Codec Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:34:40 +0000 (15:34 -0400)]
drm/amdgpu: add UVD 6.0 register headers
These are register headers for the UVD (Universal Video Decoder)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:34:14 +0000 (15:34 -0400)]
drm/amdgpu: add UVD 5.0 register headers
These are register headers for the UVD (Universal Video Decoder)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:33:44 +0000 (15:33 -0400)]
drm/amdgpu: add UVD 4.2 register headers
These are register headers for the UVD (Universal Video Decoder)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:32:09 +0000 (15:32 -0400)]
drm/amdgpu: add SMU 8.0 register headers
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:31:26 +0000 (15:31 -0400)]
drm/amdgpu: add SMU 7.1.2 register headers
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:30:46 +0000 (15:30 -0400)]
drm/amdgpu: add SMU 7.1.1 register headers
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:30:14 +0000 (15:30 -0400)]
drm/amdgpu: add SMU 7.1.0 register headers
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:29:30 +0000 (15:29 -0400)]
drm/amdgpu: add SMU 7.0.1 register headers
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:28:58 +0000 (15:28 -0400)]
drm/amdgpu: add SMU 7.0.0 register headers
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:27:02 +0000 (15:27 -0400)]
drm/amdgpu: add OSS 3.0.1 register headers
These are register headers for the OSS (OS Services)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:27:33 +0000 (15:27 -0400)]
drm/amdgpu: add OSS 3.0 register headers
These are register headers for the OSS (OS Services)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:26:30 +0000 (15:26 -0400)]
drm/amdgpu: add OSS 2.4 register headers
These are register headers for the OSS (OS Services)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:25:48 +0000 (15:25 -0400)]
drm/amdgpu: add OSS 2.0 register headers
These are register headers for the OSS (OS Services)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:24:40 +0000 (15:24 -0400)]
drm/amdgpu: add GMC 8.2 register headers
These are register headers for the GMC (Graphics Memory Controller)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:24:04 +0000 (15:24 -0400)]
drm/amdgpu: add GMC 8.1 register headers
These are register headers for the GMC (Graphics Memory Controller)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:23:29 +0000 (15:23 -0400)]
drm/amdgpu: add GMC 7.1 register headers
These are register headers for the GMC (Graphics Memory Controller)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:22:19 +0000 (15:22 -0400)]
drm/amdgpu: add GMC 7.0 register headers
These are register headers for the GMC (Graphics Memory Controller)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:21:21 +0000 (15:21 -0400)]
drm/amdgpu: add GCA 8.0 register headers
These are register headers for the GCA (Graphics and Compute Array)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:20:39 +0000 (15:20 -0400)]
drm/amdgpu: add GCA 7.2 register headers
These are register headers for the GCA (Graphics and Compute Array)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:19:28 +0000 (15:19 -0400)]
drm/amdgpu: add GCA 7.0 register headers
These are register headers for the GCA (Graphics and Compute Array)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:18:28 +0000 (15:18 -0400)]
drm/amdgpu: add DCE 11.0 register headers
These are register headers for the DCE (Display and Composition Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:17:56 +0000 (15:17 -0400)]
drm/amdgpu: add DCE 10.0 register headers
These are register headers for the DCE (Display and Composition Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:17:19 +0000 (15:17 -0400)]
drm/amdgpu: add DCE 8.0 register headers
These are register headers for the DCE (Display and Composition Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:16:08 +0000 (15:16 -0400)]
drm/amdgpu: add BIF 5.1 register headers
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:15:36 +0000 (15:15 -0400)]
drm/amdgpu: add BIF 5.0 register headers
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2015 19:06:12 +0000 (15:06 -0400)]
drm/amdgpu: add BIF 4.1 register headers
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Wed, 3 Jun 2015 23:36:39 +0000 (09:36 +1000)]
Merge branch 'virtio-gpu-drm-next' of git://git.kraxel.org/linux into drm-next
Yay, thanks to Gerd for pull this together.
* 'virtio-gpu-drm-next' of git://git.kraxel.org/linux:
Add MAINTAINERS entry for virtio-gpu.
Add virtio gpu driver.
drm_vblank_get: don't WARN_ON in case vblanks are not initialized
break kconfig dependency loop
Dave Airlie [Wed, 3 Jun 2015 23:24:28 +0000 (09:24 +1000)]
Merge branch 'linux-4.1.0-rc5-tilcdc-refactor' of https://github.com/jsarha/linux into drm-next
Please pull the contents of "Use DRM component API in tilcdc to
connect to tda998x" patch series.
* 'linux-4.1.0-rc5-tilcdc-refactor' of https://github.com/jsarha/linux:
drm/tilcdc: Force building of DRM_TILCDC_SLAVE_COMPAT
drm/tilcdc: Add DRM_TILCDC_SLAVE_COMPAT for ti,tilcdc,slave binding support
drm/tilcdc: use pm_runtime_irq_safe()
drm/tilcdc: Add support for external tda998x encoder
drm/tilcdc: Remove tilcdc slave support for tda998x driver
drm/tilcdc: Fix module unloading
Dave Airlie [Wed, 3 Jun 2015 23:23:51 +0000 (09:23 +1000)]
Merge tag 'v4.1-rc6' into drm-next
Linux 4.1-rc6
backmerge 4.1-rc6 as some of the later pull reqs are based on newer bases
and I'd prefer to do the fixup myself.
Maarten Lankhorst [Mon, 1 Jun 2015 06:59:53 +0000 (08:59 +0200)]
drm/atomic: Clear crtc_state->active in drm_atomic_helper_set_config.
This fixes some regressions in i915 when converting to atomic.
set_config failed with -EINVAL, and I received the following warning
in dmesg:
[drm:drm_atomic_crtc_check] [CRTC:20] active without enabled
Solve this by clearing active when a crtc is disabled.
Because crtc_state->enable implies that connectors are active the
change from disabled->enabled can only happen for the crtc that's
being set_config'd, and checking for !crtc_state->enable is sufficient
here.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 3 Jun 2015 23:17:45 +0000 (09:17 +1000)]
Merge tag 'topic/drm-misc-2015-05-27' of git://anongit.freedesktop.org/drm-intel into drm-next
One more round of drm-misc, again mostly atomic. Big thing is the
userspace blob code from Daniel Stone, with support for the mode_id blob
now added to the atomic ioctl. Finally we can do atomic modesets!
Note that the atomic ioctl is still behind the module knob since the
weston patches aren't quite ready yet imo - they lack TEST_ONLY support,
which is a fairly crucial bit of the atomic api. But besides that I think
it's all good to go. That's also why we didn't bother to hide the new blob
ioctls behind the knob, that part won't need to change. And if weston
patches get in shape in time we could throw the "atomic by default patch"
on top for 4.2.
* tag 'topic/drm-misc-2015-05-27' of git://anongit.freedesktop.org/drm-intel:
drm: Fix off-by-one in vblank hardware counter wraparound handling
drm/atomic: fix out of bounds read in for_each_*_in_state helpers
drm/atomic: Add MODE_ID property
drm/atomic: Add current-mode blob to CRTC state
drm: Add drm_atomic_set_mode_for_crtc
drm: check for garbage in unused addfb2 fields
drm: Retain reference to blob properties in lookup
drm/mode: Add user blob-creation ioctl
drm: Return error value from blob creation
drm: Allow creating blob properties without copy
drm/mode: Unstatic kernel-userspace mode conversion
drm/mode: Validate modes inside drm_crtc_convert_umode
drm/crtc_helper: Replace open-coded CRTC state helpers
drm: kerneldoc fixes for blob properties
drm/DocBook: Add more drm_bridge documentation
drm: bridge: Allow daisy chaining of bridges
drm/atomic: add all affected planes in drm_atomic_helper_check_modeset
drm/atomic: add drm_atomic_add_affected_planes
drm/atomic: add commit_planes_on_crtc helper
Dave Airlie [Wed, 3 Jun 2015 23:15:39 +0000 (09:15 +1000)]
Merge tag 'drm-amdkfd-next-2015-06-03' of git://people.freedesktop.org/~gabbayo/linux into drm-next
drm-amdkfd-next-2015-06-03:
- Add the H/W debugger support module, including new IOCTLs to:
- register/unregister a process as a debugged process
- Set address watch-point in the debugged process's GPU kernel
- Do a wave control operation in the debugged process's waves
See the commit messages for more details on the available operations.
The debugged process can only perform debug operation on itself. It is
blocked by the amdkfd+H/W from performing operations on other processes's
waves or GPU kernels. The blocking is done by setting the VMID and PASID of
the debugged process in the packets that are sent to the CP with the debug
instructions.
- Add support for static user-mode queues. These queues are regular queues,
but because they belong to the debugged process, we need to make sure the CP
doesn't preempt them during a debug operation. Therefore, we mark them as
static for the CP ignore them during preemption.
- Support killing all the waves when a process is terminated. This is needed
in case a process is terminated but we can't UNMAP its queues (can occur due
to several reasons). In that case, the CP could be stuck unless we kill all
its waves. This function is *very* important as it provides the kernel a high
level of control over the GPU. The reason we didn't upstream this function
so far, is because it is implemented using the H/W debugger module functions,
so we had to wait until we can upstream the H/W debugger module.
- Replace declaration of bitmap from unsigned long to standard DECLARE_BITMAP
* tag 'drm-amdkfd-next-2015-06-03' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Enforce kill all waves on process termination
drm/radeon: Add ATC VMID<-->PASID functions to kfd->kgd
drm/amdkfd: Implement address watch debugger IOCTL
drm/amdkfd: Implement wave control debugger IOCTL
drm/amdkfd: Implement (un)register debugger IOCTLs
drm/amdkfd: Add address watch operation to debugger
drm/amdkfd: Add wave control operation to debugger
drm/amdkfd: Add skeleton H/W debugger module support
drm/amdkfd: Add static user-mode queues support
drm/amdkfd: add H/W debugger IOCTL set definitions
drm/radeon: Add H/W debugger kfd->kgd functions
drm/amdkfd: Use DECLARE_BITMAP
Gerd Hoffmann [Tue, 2 Jun 2015 08:49:03 +0000 (10:49 +0200)]
Add MAINTAINERS entry for virtio-gpu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Dave Airlie [Mon, 9 Sep 2013 00:02:56 +0000 (10:02 +1000)]
Add virtio gpu driver.
This patch adds a kms driver for the virtio gpu. The xorg modesetting
driver can handle the device just fine, the framebuffer for fbcon is
there too.
Qemu patches for the host side are under review currently.
The pci version of the device comes in two variants: with and without
vga compatibility. The former has a extra memory bar for the vga
framebuffer, the later is a pure virtio device. The only concern for
this driver is that in the virtio-vga case we have to kick out the
firmware framebuffer.
Initial revision has only 2d support, 3d (virgl) support requires
some more work on the qemu side and will be added later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Ben Goz [Wed, 20 May 2015 15:05:44 +0000 (18:05 +0300)]
drm/amdkfd: Enforce kill all waves on process termination
This commit makes sure that on process termination, after
we're destroying all the active queues, we're killing all the
existing wave front of the current process.
By doing this we're making sure that if any of the CUs were blocked
by infinite loop we're enforcing it to end the shader explicitly.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Alexey Skidanov [Tue, 19 May 2015 16:25:01 +0000 (19:25 +0300)]
drm/radeon: Add ATC VMID<-->PASID functions to kfd->kgd
This patch adds three new interfaces to kfd2kgd interface file of radeon.
The interfaces are:
- Check if a specific VMID has a valid PASID mapping
- Retrieve the PASID which is mapped to a specific VMID
- Issue a VMID invalidation request to the ATC
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Wed, 20 May 2015 11:09:39 +0000 (14:09 +0300)]
drm/amdkfd: Implement address watch debugger IOCTL
v2:
- rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
- change void* to uint64_t inside ioctl arguments
- use kmalloc instead of kzalloc because we use copy_from_user
immediately after it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Wed, 20 May 2015 11:09:24 +0000 (14:09 +0300)]
drm/amdkfd: Implement wave control debugger IOCTL
v2:
- rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
- change void* to uint64_t inside ioctl arguments
- use kmalloc instead of kzalloc because we use copy_from_user
immediately after it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Wed, 20 May 2015 11:08:55 +0000 (14:08 +0300)]
drm/amdkfd: Implement (un)register debugger IOCTLs
v2: rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Wed, 20 May 2015 10:59:17 +0000 (13:59 +0300)]
drm/amdkfd: Add address watch operation to debugger
The address watch operation gives the ability to specify watch points
which will generate a shader breakpoint, based on a specified single
address or range of addresses.
There is support for read/write/any access modes.
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Wed, 20 May 2015 10:58:12 +0000 (13:58 +0300)]
drm/amdkfd: Add wave control operation to debugger
The wave control operation supports several command types executed upon
existing wave fronts that belong to the currently debugged process.
The available commands are:
HALT - Freeze wave front(s) execution
RESUME - Resume freezed wave front(s) execution
KILL - Kill existing wave front(s)
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Wed, 20 May 2015 10:48:26 +0000 (13:48 +0300)]
drm/amdkfd: Add skeleton H/W debugger module support
This patch adds the skeleton H/W debugger module support. This code
enables registration and unregistration of a single HSA process at a
time.
The module saves the process's pasid and use it to verify that only the
registered process is allowed to execute debugger operations through the
kernel driver.
v2: rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Wed, 20 May 2015 10:43:04 +0000 (13:43 +0300)]
drm/amdkfd: Add static user-mode queues support
This patch adds support for static user-mode queues in QCM.
Queues which are designated as static can NOT be preempted by
the CP microcode when it is executing its scheduling algorithm.
This is needed for supporting the debugger feature, because we
can't allow the CP to preempt queues which are currently being debugged.
The number of queues that can be designated as static is limited by the
number of HQDs (Hardware Queue Descriptors).
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Sun, 7 Dec 2014 15:05:22 +0000 (17:05 +0200)]
drm/amdkfd: add H/W debugger IOCTL set definitions
This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W
debugger functionality to the userspace.
The IOCTLs are:
- AMDKFD_IOC_DBG_REGISTER:
The purpose of this IOCTL is to notify amdkfd that a process wants to use
GPU debugging facilities on itself only.
It is expected that this IOCTL would be called before any other H/W
debugger requests are sent to amdkfd and for each GPU where the H/W
debugging needs to be enabled. The use of this IOCTL ensures that only
one instance of a debugger is active in the system.
- AMDKFD_IOC_DBG_UNREGISTER:
This IOCTL detaches the debugger/debugged process from the H/W
Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL.
- AMDKFD_IOC_DBG_ADDRESS_WATCH:
This IOCTL allows to set different watchpoints with various conditions as
indicated by the IOCTL's arguments. The available number of watchpoints
is retrieved from topology. This operation is confined to the current
debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER.
- AMDKFD_IOC_DBG_WAVE_CONTROL:
This IOCTL allows to control a wavefront as indicated by the IOCTL's
arguments. For example, you can halt/resume or kill either a
single wavefront or a set of wavefronts. This operation is confined to
the current debugged process, which was registered through
AMDKFD_IOC_DBG_REGISTER.
Because the arguments for the address watch IOCTL and wave control IOCTL
are dynamic, meaning that they could vary in size, the userspace passes a
pointer to a structure (in userspace) that contains the value of the
arguments. The kernel driver is responsible to parse this structure and
validate its contents.
v2: change void* to uint64_t inside ioctl arguments
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yair Shachar [Sun, 28 Sep 2014 08:51:15 +0000 (11:51 +0300)]
drm/radeon: Add H/W debugger kfd->kgd functions
This patch adds new interface functions to the kfd2kgd interface file. The
new functions allow to perform H/W debugger operations by writing to GPU
registers.
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Joe Perches [Wed, 20 May 2015 01:37:51 +0000 (18:37 -0700)]
drm/amdkfd: Use DECLARE_BITMAP
Use the generic mechanism to declare a bitmap instead of unsigned long.
It seems that "struct kfd_process.allocated_queue_bitmap" is unused.
Maybe it could be deleted instead.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Gerd Hoffmann [Mon, 30 Mar 2015 10:50:50 +0000 (12:50 +0200)]
drm_vblank_get: don't WARN_ON in case vblanks are not initialized
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Gerd Hoffmann [Tue, 11 Nov 2014 08:17:00 +0000 (09:17 +0100)]
break kconfig dependency loop
After adding virtio-gpu I get this funky kconfig dependency loop.
scripts/kconfig/conf --oldconfig Kconfig
drivers/video/fbdev/Kconfig:5:error: recursive dependency detected!
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:34: symbol DRM_KMS_FB_HELPER is selected by DRM_VIRTIO_GPU
drivers/gpu/drm/virtio/Kconfig:1: symbol DRM_VIRTIO_GPU depends on VIRTIO
drivers/virtio/Kconfig:1: symbol VIRTIO is selected by REMOTEPROC
drivers/remoteproc/Kconfig:4: symbol REMOTEPROC is selected by OMAP_REMOTEPROC
drivers/remoteproc/Kconfig:12: symbol OMAP_REMOTEPROC depends on OMAP_IOMMU
drivers/iommu/Kconfig:141: symbol OMAP_IOMMU is selected by VIDEO_OMAP3
drivers/media/platform/Kconfig:96: symbol VIDEO_OMAP3 depends on VIDEO_V4L2
drivers/media/v4l2-core/Kconfig:6: symbol VIDEO_V4L2 depends on I2C
drivers/i2c/Kconfig:7: symbol I2C is selected by FB_DDC
drivers/video/fbdev/Kconfig:59: symbol FB_DDC is selected by FB_CYBER2000_DDC
drivers/video/fbdev/Kconfig:374: symbol FB_CYBER2000_DDC depends on FB_CYBER2000
drivers/video/fbdev/Kconfig:362: symbol FB_CYBER2000 depends on FB
Making VIDEO_OMAP3 depend on OMAP_IOMMU instead of selecting it breaks the
loop, which looks like the best way to handle it to me. Updated OMAP_IOMMU
help text accordingly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Dave Airlie [Tue, 2 Jun 2015 08:10:50 +0000 (18:10 +1000)]
Merge tag 'drm-intel-next-fixes-2015-05-29' of git://anongit.freedesktop.org/drm-intel into drm-next
Fixes for 4.2. Nothing too serious (given that it's still pre merge
window). With that it's off for 2 weeks of vacation for me and taking care
of 4.2 fixes for Jani.
* tag 'drm-intel-next-fixes-2015-05-29' of git://anongit.freedesktop.org/drm-intel:
drm/i915: limit PPGTT size to 2GB in 32-bit platforms
drm/i915: Another fbdev hack to avoid PSR on fbcon.
drm/i915: Return the frontbuffer flip to enable intel_crtc_enable_planes.
drm/i915: disable IPS while getting the sink CRCs
drm/i915: Disable 12bpc hdmi for now
drm/i915: Adjust sideband locking a bit for CHV/VLV
drm/i915: s/dpio_lock/sb_lock/
drm/i915: Kill intel_flush_primary_plane()
drm/i915: Throw out WIP CHV power well definitions
drm/i915: Use the default 600ns LDO programming sequence delay
drm/i915: Remove unnecessary null check in execlists_context_unqueue
drm/i915: Use spinlocks for checking when to waitboost
drm/i915: Fix the confusing comment about the ioctl limits
Revert "drm/i915: Force clean compilation with -Werror"
Alexandre Courbot [Fri, 15 May 2015 07:09:54 +0000 (16:09 +0900)]
drm/ttm: dma: Don't crash on memory in the vmalloc range
dma_alloc_coherent() can return memory in the vmalloc range.
virt_to_page() cannot handle such addresses and crashes. This
patch detects such cases and obtains the struct page * using
vmalloc_to_page() instead.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Mon, 1 Jun 2015 02:01:07 +0000 (19:01 -0700)]
Linux 4.1-rc6
Linus Torvalds [Sun, 31 May 2015 23:00:34 +0000 (16:00 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"Off-by-one in d_walk()/__dentry_kill() race fix.
It's very hard to hit; possible in the same conditions as the original
bug, except that you need the skipped branch to contain all the
remaining evictables, so that the d_walk()-calling loop in
d_invalidate() decides there's nothing more to do and doesn't go for
another pass - otherwise that next pass will sweep the sucker.
So it's not too urgent, but seeing that the fix is obvious and the
original commit has spread into all -stable branches..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
d_walk() might skip too much
Linus Torvalds [Sun, 31 May 2015 19:20:59 +0000 (12:20 -0700)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Three fixes this time around:
- fix a memory leak which occurs when probing performance monitoring
unit interrupts
- fix handling of non-PMD aligned end of RAM causing boot failures
- fix missing syscall trace exit path with syscall tracing enabled
causing a kernel oops in the audit code"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8357/1: perf: fix memory leak when probing PMU PPIs
ARM: fix missing syscall trace exit
ARM: 8356/1: mm: handle non-pmd-aligned end of RAM
Linus Torvalds [Sun, 31 May 2015 19:03:42 +0000 (12:03 -0700)]
Merge branch 'upstream' of git://git./linux/kernel/git/ralf/linux
Pull MIPS fixes from Ralf Baechle:
"MIPS fixes for 4.1 all across the tree"
* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux:
MIPS: strnlen_user.S: Fix a CPU_DADDI_WORKAROUNDS regression
MIPS: BMIPS: Fix bmips_wr_vec()
MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set
MIPS: Fuloong 2E: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760
MIPS: irq: Use DECLARE_BITMAP
ttyFDC: Fix to use native endian MMIO reads
MIPS: Fix CDMM to use native endian MMIO reads
Linus Torvalds [Sun, 31 May 2015 18:39:25 +0000 (11:39 -0700)]
Merge branch 'turbostat' of git://git./linux/kernel/git/lenb/linux
Pull turbostat tool fixes from Len Brown:
"Just one minor kernel dependency in this batch -- added a #define to
msr-index.h"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number to 4.7
tools/power turbostat: allow running without cpu0
tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
tools/power turbostat: enable turbostat to support Knights Landing (KNL)
tools/power turbostat: correctly display more than 2 threads/core
Linus Torvalds [Sun, 31 May 2015 18:31:42 +0000 (11:31 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"These are mostly minor fixes, with the exception of the following that
address fall-out from recent v4.1-rc1 changes:
- regression fix related to the big fabric API registration changes
and configfs_depend_item() usage, that required cherry-picking one
of HCH's patches from for-next to address the issue for v4.1 code.
- remaining TCM-USER -v2 related changes to enforce full CDB
passthrough from Andy + Ilias.
Also included is a target_core_pscsi driver fix from Andy that
addresses a long standing issue with a Scsi_Host reference being
leaked on PSCSI device shutdown"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iser-target: Fix error path in isert_create_pi_ctx()
target: Use a PASSTHROUGH flag instead of transport_types
target: Move passthrough CDB parsing into a common function
target/user: Only support full command pass-through
target/user: Update example code for new ABI requirements
target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem
target: Drop signal_pending checks after interruptible lock acquire
target: Add missing parentheses
target: Fix bidi command handling
target/user: Disallow full passthrough (pass_level=0)
ISCSI: fix minor memory leak
Linus Torvalds [Sun, 31 May 2015 18:24:49 +0000 (11:24 -0700)]
Merge tag 'hwmon-for-linus-v4.1-rc6' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Some late hwmon patches, all headed for -stable
- fix sysfs attribute initialization in nct6775 and nct6683 drivers
- do not attempt to auto-detect tmp435 on I2C address 0x37
- ensure iio channel is of type IIO_VOLTAGE in ntc_thermistor driver"
* tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6683) Add missing sysfs attribute initialization
hwmon: (nct6775) Add missing sysfs attribute initialization
hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37
hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE
Roland Dreier [Sat, 30 May 2015 06:12:10 +0000 (23:12 -0700)]
iser-target: Fix error path in isert_create_pi_ctx()
We don't assign pi_ctx to desc->pi_ctx until we're certain to succeed
in the function. That means the cleanup path should use the local
pi_ctx variable, not desc->pi_ctx.
This was detected by Coverity (CID
1260062).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Tue, 19 May 2015 21:44:41 +0000 (14:44 -0700)]
target: Use a PASSTHROUGH flag instead of transport_types
It seems like we only care if a transport is passthrough or not. Convert
transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a
flag, TRANSPORT_FLAG_PASSTHROUGH.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Tue, 19 May 2015 21:44:40 +0000 (14:44 -0700)]
target: Move passthrough CDB parsing into a common function
Aside from whether they handle BIDI ops or not, parsing of the CDB by
kernel and user SCSI passthrough modules should be identical. Move this
into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user.
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Tue, 19 May 2015 21:44:39 +0000 (14:44 -0700)]
target/user: Only support full command pass-through
After much discussion, give up on only passing a subset of SCSI commands
to userspace and pass them all. Based on what pscsi is doing, make sure
to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to
pscsi.
Make hw_block_size configurable via dev param.
Remove mention of command filtering from tcmu-design.txt.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Tue, 19 May 2015 21:44:38 +0000 (14:44 -0700)]
target/user: Update example code for new ABI requirements
We now require that the userspace handler set a bit if the command is not
handled.
Update calls to tcmu_hdr_get_op for v2.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Fri, 22 May 2015 21:07:44 +0000 (14:07 -0700)]
target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
See https://bugzilla.redhat.com/show_bug.cgi?id=
1025672
We need to put() the reference to the scsi host that we got in
pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with
the dev_virt, not the hba_virt.
Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Christoph Hellwig [Sun, 3 May 2015 06:50:52 +0000 (08:50 +0200)]
target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem
There is just one configfs subsystem in the target code, so we might as
well add two helpers to reference / unreference it from the core code
instead of passing pointers to it around.
This fixes a regression introduced for v4.1-rc1 with commit
9ac8928e6,
where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would
fail, because the assignment from the original target_core_subsystem[]
is no longer happening at target_register_template() time.
(Fix target_core_exit_configfs pointer dereference - Sagi)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Guenter Roeck [Thu, 28 May 2015 16:12:23 +0000 (09:12 -0700)]
hwmon: (nct6683) Add missing sysfs attribute initialization
The following error message is seen when loading the nct6683 driver
with DEBUG_LOCK_ALLOC enabled.
BUG: key
ffff88040b2f0030 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988
lockdep_init_map+0x469/0x630()
DEBUG_LOCKS_WARN_ON(1)
Caused by a missing call to sysfs_attr_init() when initializing
sysfs attributes.
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Guenter Roeck [Thu, 28 May 2015 16:08:09 +0000 (09:08 -0700)]
hwmon: (nct6775) Add missing sysfs attribute initialization
The following error message is seen when loading the nct6775 driver
with DEBUG_LOCK_ALLOC enabled.
BUG: key
ffff88040b2f0030 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988
lockdep_init_map+0x469/0x630()
DEBUG_LOCKS_WARN_ON(1)
Caused by a missing call to sysfs_attr_init() when initializing
sysfs attributes.
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Sat, 30 May 2015 00:09:39 +0000 (17:09 -0700)]
Merge tag 'acpi-pci-4.1-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull PCI / ACPI fix from Rafael Wysocki:
"This fixes a bug uncovered by a recent driver core change that
modified the implementation of the ACPI_COMPANION_SET() macro to
strictly rely on its second argument to be either NULL or a valid
pointer to struct acpi_device.
As it turns out, pcibios_root_bridge_prepare() on x86 and ia64 works
with the assumption that the only code path calling pci_create_root_bus()
is pci_acpi_scan_root() and therefore the sysdata argument passed to
it will always match the expectations of pcibios_root_bridge_prepare().
That need not be the case, however, and in particular it is not the
case for the Xen pcifront driver that passes a pointer to its own
private data strcture as sysdata to pci_scan_bus_parented() which then
passes it to pci_create_root_bus() and it ends up being used incorrectly
by pcibios_root_bridge_prepare()"
* tag 'acpi-pci-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / ACPI: Do not set ACPI companions for host bridges with parents
Linus Torvalds [Fri, 29 May 2015 23:45:45 +0000 (16:45 -0700)]
Merge tag 'xfs-for-linus-4.1-rc6' of git://git./linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a little larger than I'd like late in the release cycle, but
all the fixes are for regressions introduced in the 4.1-rc1 merge, or
are needed back in -stable kernels fairly quickly as they are
filesystem corruption or userspace visible correctness issues.
Changes in this update:
- regression fix for new rename whiteout code
- regression fixes for new superblock generic per-cpu counter code
- fix for incorrect error return sign introduced in 3.17
- metadata corruption fixes that need to go back to -stable kernels"
* tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: fix broken i_nlink accounting for whiteout tmpfile inode
xfs: xfs_iozero can return positive errno
xfs: xfs_attr_inactive leaves inconsistent attr fork state behind
xfs: extent size hints can round up extents past MAXEXTLEN
xfs: inode and free block counters need to use __percpu_counter_compare
percpu_counter: batch size aware __percpu_counter_compare()
xfs: use percpu_counter_read_positive for mp->m_icount
Linus Torvalds [Fri, 29 May 2015 21:48:58 +0000 (14:48 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Two weeks worth of small bug fixes this time, nothing sticking out
this time:
- one defconfig change to adapt to a modified Kconfig symbol
- two fixes for i.MX for backwards compatibility with older DT files
that was accidentally broken
- one regression fix for irq handling on pxa
- three small dt files on omap, and one each for imx and exynos"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: multi_v7_defconfig: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760
ARM: imx6: gpc: don't register power domain if DT data is missing
ARM: imx6: allow booting with old DT
ARM: dts: set display clock correctly for exynos4412-trats2
ARM: pxa: pxa_cplds: signedness bug in probe
ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK
ARM: dts: omap3-devkit8000: Fix NAND DT node
ARM: dts: am335x-boneblack: disable RTC-only sleep
ARM: dts: fix imx27 dtb build rule
ARM: dts: imx27: only map 4 Kbyte for fec registers
Linus Torvalds [Fri, 29 May 2015 21:39:24 +0000 (14:39 -0700)]
Merge tag 'dm-4.1-fixes-3' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device-mapper fixes from Mike Snitzer:
"Quite a few fixes for DM's blk-mq support thanks to extra DM multipath
testing from Junichi Nomura and Bart Van Assche.
Also fix a casting bug in dm_merge_bvec() that could cause only a
single page to be added to a bio (Joe identified this while testing
dm-cache writeback)"
* tag 'dm-4.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix casting bug in dm_merge_bvec()
dm: fix reload failure of 0 path multipath mapping on blk-mq devices
dm: fix false warning in free_rq_clone() for unmapped requests
dm: requeue from blk-mq dm_mq_queue_rq() using BLK_MQ_RQ_QUEUE_BUSY
dm mpath: fix leak of dm_mpath_io structure in blk-mq .queue_rq error path
dm: fix NULL pointer when clone_and_map_rq returns !DM_MAPIO_REMAPPED
dm: run queue on re-queue
projects / openwrt / staging / blogic.git / log