ASoC: qdsp6: dt-bindings: Add q6afe display_port dt binding

This patch adds bindings required for DISPLAY_PORT_RX
port on AFE.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6asm-dai: Add support to compress offload

This patch adds MP3 playback support in q6asm dais, adding other codec
support should be pretty trivial.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6asm: add support to MP3 format

This patch adds support to mp3 format in ASM module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: q6asm-dai: dt-bindings: Add support to compress dais

This patch adds board specific bindings required for dais, In particular
for compressed dais and dai direction.

Board specific setup involves setting up some of dais as compressed dais
and also specify direction of any dai. Some of the dais might only
support capture/playback depending on the board level wiring.

These two new dt properties will allow such flexibilty at board level dts.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: compress: make use of runtime buffer for copy

Default copy function uses kmalloc to allocate buffers, lets check
if the runtime buffers are setup before making this allocations.
This can be useful if the buffers are dma buffers.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: soc-compress: add support to snd_compr_set_runtime_buffer()

Existing compress offload code allocates data buffers using simple kmalloc,
however there are situations where these buffers have to be mapped
in smmu. So provide a way to set the runtime buffer by the driver itself,
simillar to what we do with pcm.

This patch adds support to set runtime dma buffer on compressed stream.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Add more platform granularity

The current SKYLAKE kconfig is a all-you-can-eat selection that will
support all known plaforms. This is however not necessarily a good
thing: most platforms for SKL and KBL don't support the DSP, but a
number of CNL/WHL ones do. Selecting this driver in all cases isn't
really smart and will require users to muck with blacklists.

Partition the configs to allow distributions to select on which
platform this driver is used. Keep the existing SND_SOC_INTEL_SKYLAKE
config to select everything for backwards compatibility. This patch does
not provide new functionality, only finer-grained choices in supported
platforms.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: Add r8a774c0 support

Document RZ/G2E (R8A774C0) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card: tidyup prefix for snd_soc_codec_conf

Current simple-card is handling "prefix" by many ways.
But, it is not useful and readable.
We want to do is that allow having it everywere.
This patch supports it.
It will be overwrote if lower node has it.

sound {
simple-audio-card,prefix = "xxx"; // initial

simple-audio-card,dai-link {
prefix = "xxx"; // overwrite
cpu {
...
};
codec {
prefix = "xxx"; // overwrite
};
};
};

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card: tidyup convert_rate/channel method

Current simple-card is handling "convert_rate/channel"
by many ways. But, it is not useful and readable.
We want to do is that allow having it everywere.
This patch support it.
It will be overwrote if lower node has it.

sound {
simple-audio-card,convert_channels = <xxx>; // initial

simple-audio-card,dai-link {
convert_channels = <xxx>; // overwrite
cpu {
convert_channels = <xxx>; // overwrite
};
codec {
convert_channels = <xxx>; // overwrite
};
};
};

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card: tidyup mclk-fs method

Current simple-card is handling "mclk-fs" by many way.
But, it is not useful and readable.
We want to do is that allow having mclk-fs everywere.
This patch support it.
It will be overwrote if lower node has it.

sound {
simple-audio-card,mclk-fs = <xxx>; // for initial

simple-audio-card,dai-link {
mclk-fs = <xxx>; // overwrite
cpu {
mclk-fs = <xxx>; // overwrite
};
codec {
mclk-fs = <xxx>; // overwrite
};
};
};

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card: merge simple-scu-card

simple-card and simple-scu-card are very similar driver,
but the former is supporting normal sound card,
the latter is supporting DPCM sound card.

We couldn't use normal sound and DPCM sound in same time by
one sound card. This patch merges both sound card into
simple-card. Now we can use both feature on same driver.

simple-card is now supporting .compatible = "simple-scu-audio-card".

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card: merge simple-scu-card on Doc

simple-card and simple-scu-card are very similar driver,
but the former is supporting normal sound card,
the latter is supporting DPCM sound card.

We couldn't use normal sound and DPCM sound in same time by
one sound card. This patch merges both sound card into
simple-card. Now we can use both feature on same driver.

simple-card is now supporting .compatible = "simple-scu-audio-card".

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-card: tidyup prefix for snd_soc_codec_conf

Current audio-graph-card is handling "prefix" by many ways.
But, it is not useful and readable.
We want to do is that allow having it everywere.
This patch supports it.
It will be overwrote if lower node has it.

sound {
prefix = "xxx"; // initial
};

codec {
audio-graph-card,prefix = "xxx"; // overwrite
ports {
prefix = "xxx"; // overwrite
port {
prefix = "xxx"; // overwrite
};
};
};

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-card: tidyup convert_rate/channel method

Current audio-graph-card is handling "convert_rate/channel"
by many ways. But, it is not useful and readable.
We want to do is that allow having it everywere.
This patch support it.
It will be overwrote if lower node has it.

sound {
convert-channels = <xxx>; // initial
};

codec {
audio-graph-card,convert-channels = <xxx>; // overwrite
ports {
convert_channels = <xxx>; // overwrite
port {
convert_channels = <xxx>; // overwrite
endpoint {
convert_channels = <xxx>; // overwrite
};
};
};
};

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-card: tidyup mclk-fs method

Current audio-graph-card is handling "mclk-fs" by many way.
But, it is not useful and readable.
We want to do is that allow having mclk-fs everywere.
This patch support it.
It will be overwrote if lower node has it.

sound {
mclk-fs = <xxx>; // initial
};

codec {
ports {
mclk-fs = <xxx>; // overwrite
port {
mclk-fs = <xxx>; // overwrite
endpoint {
mclk-fs = <xxx>; // overwrite
};
};
};
};

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-card: merge audio-graph-scu-card

audio-graph-card and audio-graph-scu-card are very similar driver,
but the former is supporting normal sound card,
the latter is supporting DPCM sound card.

We couldn't use normal sound and DPCM sound in same sound card by
audio-graph-card.
This patch merges both sound card into it.
Now we can use both feature on same driver.

audio-grap-card is now supporting .compatible = "audio-graph-scu-card".

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-card: merge audio-graph-scu-card on Doc

audio-graph-card and audio-graph-scu-card are very similar driver,
but the former is supporting normal sound card,
the latter is supporting DPCM sound card.

We couldn't use normal sound and DPCM sound in same sound card by
audio-graph-card.
This patch merges both feature into it on Documentation.
Now we can use both feature on same driver.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() ID method

commit b6f3fc005a2c8 ("ASoC: simple-card-utils: fixup
asoc_simple_card_get_dai_id() counting") fixuped getting DAI ID method.
It will get DAI ID from OF graph "port", but, we want to consider about
"endpoint", too.
And, we also want to keep compatibility.

This patch fixup it as

if (driver has specified DAI ID)
use it as DAI ID
else if (OF graph endpoint has reg)
use it as DAI ID
else if (OF graph port has reg)
use it as DAI ID
else
use endpoint count as DAI ID

Fixes: commit b6f3fc005a2c8 ("ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() counting")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: core: Invoke pcm_new() for all DAI-link

Remove no_pcm check to invoke pcm_new() for backend dai-links
too. This fixes crash in hdmi codec driver during hdmi_codec_startup()
while accessing chmap_info struct. chmap_info struct memory is
allocated in pcm_new() of hdmi codec driver which is not invoked
in case of DPCM when hdmi codec driver is part of backend dai-link.

Below is the crash stack:

[   61.635493] Unable to handle kernel NULL pointer dereference at virtual address 00000018
..
[   61.666696]   CM = 0, WnR = 1
[   61.669778] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffc0d6633000
[   61.676526] [0000000000000018] *pgd=0000000153fc8003, *pud=0000000153fc8003, *pmd=0000000000000000
[   61.685793] Internal error: Oops: 96000046 [#1] PREEMPT SMP
[   61.722955] CPU: 7 PID: 2238 Comm: aplay Not tainted 4.14.72 #21
..
[   61.740269] PC is at hdmi_codec_startup+0x124/0x164
[   61.745308] LR is at hdmi_codec_startup+0xe4/0x164

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pcm512x: Implement the digital_mute interface

Clicks and pops of various volumes can be produced while the device is
opened, closed, put into and taken out of standby, or reconfigured.
Fix this, by implementing the digital_mute interface, so that the
output is muted during such operations.

Signed-off-by: Dimitris Papavasiliou <dpapavas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: fix do_div warning in spdifin

Even if this spdif input driver is only supposed to be used on 64bits
platform, there is possible problem with 32bits and do_div, as reported
by the kbuild robot. Just fix it.

Fixes: 5ce5658375e6 ("ASoC: meson: add axg spdif input")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: add error logs on probe, remove dependency on NHLT

Add error logs to make probe debug easier.

Also remove hard-coded dependency on NHLT. NHLT literally stands for
NonHdaudioLinkTable and is only required for SSP/DMIC interfaces.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: remove useless tests on HDaudio capabilities

bus->ppcap is now tested upfront, there is no need to re-check if the
hardware is exposed as needed. Remove tests and remove indentation.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: stop probe if HDaudio capabilities don't exist

Check immediately if required HDaudio capabilities can't be found (no
PPCAP or no streams exposed in GCAP), and move all DMA inits after the
error tests.

PPCAP and GCAP are not reliable indicators of DSP presence, but if
they don't exist then the driver will not work.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Harden DSP detection with PCI class/subclass info

The existing PPCAP and GCAP fields cannot be used reliably to
determine if the DSP is enabled by the BIOS. Instead rely on the
class/subclass information to find out if this driver can run or
not. The values in the code don't seem to be documented in publicly
available documents but are part of recommendations made to BIOS
writers and have been verified to be accurate on a number of
platforms.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Add CFL-S support

It's with CNP, supposed to be equivalent with CNL entry.

Keep the existing declaration style for now, at a later point we may
transition and use PCI_DEVICE_DATA().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pcm3060: Add powersaving widgets for DAC and ADC

Enable DAC/ADC only when playing/capturing

Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: xlnx: enable i2s driver build

Enabled i2s driver build option.

Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: xlnx: Add i2s driver

I2S IP instance can work in transmitter/playback or receiver/capture mode
exclusively. The patch registers corresponding instance as ASoC component
with audio framework.

Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: ASoC: xlnx, i2s: Document i2s bindings

Added documentation for I2S IP core DT bindings.

Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: kbl_rt5660: Add a new machine driver for kbl with rt5660

The new Dell IoT platform uses kabylake + alc3277 codec, and alc3277
shares the driver with the codec rt5660, here we generate a new
machine driver based on kbl_da7219_max98357a.

The audio design on this IoT platform is as below:
 - Intel kabylake platform
 - connect the codec ALC3277 via SSP0
 - line-out and line-in with Micbias jacks
 - line-out mute control and jack detection of line-out and line-in
 - two HDMI ports with audio capability

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'for-4.20' of https://git./linux/kernel/git/broonie/sound into asoc-4.21 intel dep

MAINTAINERS: Add Amlogic sound drivers entry

Add sound/soc/meson drivers entry for Amlogic audio drivers.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: add axg spdif input

Add support for the spdif input decoder of the axg SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: add axg spdif input DT binding documentation

Add the DT binding documentation for axg's SPDIF input.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: axg-toddr: add support for spdifin backend

add IEC958_SUBFRAME_LE to the list of format accepted by the fifo frontend.

As opposed to what was initially noted in the toddr dai driver, the spdifin
does not place the msb at bit 28, it just output a whole spdif subframe.

Placing the msb at bit 28 in the toddr driver just filters out the parity,
user, channel status and validity bits. It is better to just provide the
whole spdif subframe to the userspace and let the iec958 plugin deal with
it.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card: Dereference pointer for memcpy sizeof in asoc_simple_card_probe

Commit 4fb7f4df49d3 ("ASoC: simple-card: use cpu/codec pointer on
simple_dai_props") updated {cpu,codec}_dai to be pointers in struct
simple_dai_props but didn't update these locations to dereference the
pointers.
This patch fixup it for non DT simple-card use case.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl-sai: Fix typo in "transmitter"

Fix the spelling of "transmitter".

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: Fix SND_SOC_EUKREA_TLV320 build error on i.MX8M

eukrea-tlv320.c machine driver runs on non-DT platforms
and include <asm/mach-types.h> header file in order to be able
to use some machine_is_eukrea_xxx() macros.

Building it for ARM64 causes the following build error:

sound/soc/fsl/eukrea-tlv320.c:28:10: fatal error: asm/mach-types.h: No such file or directory

Avoid this error by not allowing to build the SND_SOC_EUKREA_TLV320
driver when ARM64 is selected.

This is needed in preparation for the i.MX8M support.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: remove RSND_REG_ from rsnd_reg

Current rsnd is using RSND_REG_xxx for register naming,
and using RSND_REG_##f style macro for read/write.
The biggest reason why it uses this style is that
we can avoid non-existing register access.
But, its demerit is sequential register access code will
be very ugly.
Current rsnd driver is well tested, so, let's remove RSND_REG_
from rsnd_reg, and cleanup sequential register access code.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-scu-card: care multi DPCM codec_conf

Current simple-scu-card didn't care about codec_conf
for multi DPCM case. This patch cares it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-scu-card: use cpu/codec pointer on graph_dai_props

In  DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.

Now, we want to merge simple-card and simple-scu-card.

These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on simple-scu-card.
It is same logic with simple-card, thus easy merging.
This is prepare for merging simple card

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-scu-card: tidyup "convert-rate/channels" parsing

simple-scu-card.c is supporting "convert-rate/channels" which is
used for DPCM.
But, sound card might have multi codecs, and each codec might need
each convert-rate/channels.

This patch supports each codec's convert-rate/channles support.
top node convert-rate/channels will overwrite settings if exist.

It can't support each codec's convert-rate/channels if sound card had
multi codecs without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-scu-card: care link / dai count

In DPCM case, it uses CPU-dummy / dummy-Codec dai links.
If sound card is caring only DPCM, link count = dai count,
but, if non DPCM case, link count != dai count.
Now, we want to merge simple-card and simple-scu-card,
then, we need to care both link / dai count more carefly
This patch cares it, and prepare for merging simple card

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-scu-card: add dai-link support

simple-card is supporting dai-link support, but simple-scu-card
doesn't have it.
This patch support it. This is prepare for merging simple-card
and simple-scu-card.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-scu-card: tidyup asoc_simple_card_parse_daifmt() timing

Current simple-scu-card driver is parsing codec position for DPCM
and consider DAI format. But, current operation is doing totally pointless,
because it should be called for each CPU/Codec pair.
Let's tidyup asoc_simple_card_parse_daifmt() timing.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card: use cpu/codec pointer on simple_dai_props

In  DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.

Now, we want to merge simple-card and simple-scu-card.

These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on simple-card.
It is same logic with simple-scu-card, thus easy merging.
This is prepare for merging audio card

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card-utils: fix build warning without CONFIG_OF

When CONFIG_OF is disabled, of_graph_parse_endpoint() does not
initialize 'info', and gcc can see that:

sound/soc/generic/simple-card-utils.c: In function 'asoc_simple_card_parse_graph_dai':
sound/soc/generic/simple-card-utils.c:284:13: error: 'info.port' may be used uninitialized in this function [-Werror=maybe-uninitialized]

It's probably best to check the return code anyway, and that also
takes care of the warning.

Fixes: b6f3fc005a2c ("ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() counting")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sdm845: add rt5663 codec select

Calling into the codec driver adds a dependency on that being reachable
from the module:

ERROR: "rt5663_sel_asrc_clk_src" [sound/soc/qcom/snd-soc-sdm845.ko]
undefined!

Add the corresponding select statement, as it is done in the other user
(Intel).

Fixes: f7485875a687 ("ASoC: sdm845: Add configuration for headset codec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: kbl_da7219_max98927: fix the audio jack button remapping

From the da7219 spec, the button A, B, C and D are remapped to
0, 1, 2 and 3 respectively where button A is KEY_PLAYPAUSE,
B is KEY_VOLUMEUP, C is KEY_VOLUMEDOWN and D is KEY_VOICECOMMAND.

Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Signed-off-by: Max Chang <changmax@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Point of View Mobii TAB-P1005W-232

Add a quirk for the Point of View Mobii TAB-P1005W-232 v2.0 tablet, this
BYTCR device uses IN1 for its MIC and JD2 for jack-detect, rather then the
default IN3 and JD1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Prowise PT301 tablet

Add a quirk for the Prowise PT301 tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

Also it uses IN1 for its MIC and JD2 for jack-detect, rather then the
default IN3 and JD1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9867: Add copyright and module author

Driver rewritten, assign copyright notice and change module author
as original one remains silent and I want to be notified about bugs.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sdm845: Add configuration for headset codec

Set DAI format and sysclk for headset codec.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sdm845: Add TDM configuration for speaker

Set TDM time slots and DAI format for speaker codec.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9867: Fix signal paths

Sound capture and line bypass currently do not work as well as
some mixer controls. Fix that by building proper audio paths and
adjusting volume controls to match datasheet.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9867: Calculate LRCLK divider

Drop "Common NI Values Table" and calculate LRCLK divider, then
add allowed rate constraints based on master clock frequency.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9867: Fix power management

Implement set_bias_level to drive shutdown bit, so device is
put to sleep when unused.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9867: Remove useless assignment

ret is assigned later, no need to initialize it.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5660: Add a new ACPI match ID

The Realtek codec ALC3277 is 100% compatible with the codec RT5660
in I2S mode. And on the Dell IoT platform, the codec is ALC3277,
and the HID of the codec in the BIOS is 10EC3277, so adding this
ID to the ACPI match table.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: ak4104: move to GPIO consumer API

Get the reset GPIO through the GPIO consumer API. This allows specifying the
DT property as "reset-gpios" without breaking existing DT users.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: ak4104: use 'reset-gpios' rather than 'reset-gpio'

Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to
switch to the gpiod consume API to handle this correctly.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: cs4270: move to GPIO consumer API

Get the reset GPIO through the GPIO consumer API. This allows specifying the
DT property as "reset-gpios" without breaking existing DT users.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: cs4270: use 'reset-gpios' rather than 'reset-gpio'

Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to
switch to the gpiod consume API to handle this correctly.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Use of_node_name_eq for node name comparisons

Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

For the FSL ASoC card, the full node names appear to be "ssi", "esai",
and "sai", so there's not any reason to use strstr and of_node_name_eq
can be used instead.

Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: use dma_ops of parent device for acp_audio_dma

AMD platform device acp_audio_dma can only be created by parent PCI
device driver (drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c). Pass struct
device of the parent to snd_pcm_lib_preallocate_pages() so
dma_alloc_coherent() can use correct dma_ops. Otherwise, it will
use default dma_ops which is nommu_dma_ops on x86_64 even when
IOMMU is enabled and set to non passthrough mode.

Though platform device inherits some dma related fields during its
creation in mfd_add_device(), we can't simply pass its struct device
to snd_pcm_lib_preallocate_pages() because dma_ops is not among the
inherited fields. Even it were, drivers/iommu/amd_iommu.c would
ignore it because get_device_id() doesn't handle platform device.

This change shouldn't give us any trouble even struct device of the
parent becomes null or represents some non PCI device in the future,
because get_dma_ops() correctly handles null struct device or uses
the default dma_ops if struct device doesn't have it set.

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: use DMA addr rather than CPU pa for acp_audio_dma

We shouldn't assume CPU physical address we get from page_to_phys()
is same as DMA address we get from dma_alloc_coherent(). On x86_64,
we won't run into any problem with the assumption when dma_ops is
nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled.
And it's most likely different from CPU physical address when AMD
IOMMU is not in passthrough mode.

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: cht_bsw_max98090_ti: Add pmc_plt_clk_0 quirk for Chromebook Gnawty

The Gnawty model Chromebook uses pmc_plt_clk_0 instead of pmc_plt_clk_3
for the mclk, just like the Clapper and Swanky models.

This commit adds a DMI based quirk for this.

This fixing audio no longer working on these devices after
commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
that commit fixes us unnecessary keeping unused clocks on, but in case of
the Gnawty that was breaking audio support since we were not using the
right clock in the cht_bsw_max98090_ti machine driver.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201787
Cc: stable@vger.kernel.org
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-and-tested-by: Jaime Pérez <19.jaime.91@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98373: Added max98373_reset for stable amp reset

This patch added max98373_reset function to avoid amp software reset failure and code duplication.
Reset verification step has been added for stable amp reset and it repeats verification maximum 3 times when it is failed.
Chip revision ID is available when the amp is in the idle state which means software reset is completed well.
Additional 10ms delay was added for every retrial and maximum 30ms delay can be applied.

Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-card: use cpu/codec pointer on graph_dai_props

In  DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.

Now, we want to merge audio-graph-card and audio-graph-scu-card.

These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on audio-graph-card.
It is same logic with audio-graph-scu-card, thus easy merging.
This is prepare for merging audio card

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-scu-card: care multi DPCM codec_conf

Current audio-graph-scu-card didn't care about codec_conf
for multi DPCM case. This patch cares it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-scu-card: use cpu/codec pointer on graph_dai_props

In  DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.

Now, we want to merge audio-graph-card and audio-graph-scu-card.

These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on audio-graph-scu-card.
It is same logic with audio-graph-card, thus easy merging.
This is prepare for merging audio card

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-scu-card: care link / dai count

In DPCM case, it uses CPU-dummy / dummy-Codec dai links.
If sound card is caring only DPCM, link count = dai count,
but, if non DPCM case, link count != dai count.
Now, we want to merge audio-graph-card and audio-graph-scu-card,
then, we need to care both link / dai count more carefly
This patch cares it, and prepare for merging audio card

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() counting

asoc_simple_card_get_dai_id() returns DAI ID, but it is based on
DT node's "endpoint" position.
Almost all cases 1 port has 1 endpoint, thus, it was no problem.
But in reality, port : endpoint = 1 : N, thus, counting endpoint
is BUG, it should based on "port" ID.
This patch fixup it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: add missing TDM Split mode support for simple-card

commit f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support")
added TDM Split mode support for rsnd driver.
But, it cares audio-graph-card style only. We can't use TDM Split
mode on simple-card style now.
This patch fixup this issue.

Fixes: f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: fixup mod ID for CTU regmap read/write

commit c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub")
add new .get_id/.get_id_sub to indicate module ID/subID.
It is used for SSIU and CTU. In SSIU case, subID indicates BUSIF,
but register settings is based on SSIU ID.
OTOH, in CTU case, subID indicates CTU channel, and register settings
is based on it. This means regmap read/write function needs to care it.
This patch fixup this issue. It can't play MIXed sound without this
patch.

Fixes: c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: indicates Channel and Mode for debug

For TDM debug purpose, indicating Channel and Mode is very
useful. This patch indicate it if it has #define DEBUG

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: cht_bsw_max98090_ti: Add pmc_plt_clk_0 quirk for Chromebook Clapper

The Clapper model Chromebook uses pmc_plt_clk_0 instead of pmc_plt_clk_3
for the mclk, just like the Swanky model.

This commit adds a DMI based quirk for this.

This fixing audio no longer working on these devices after
commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
that commit fixes us unnecessary keeping unused clocks on, but in case of
the Clapper that was breaking audio support since we were not using the
right clock in the cht_bsw_max98090_ti machine driver.

Cc: stable@vger.kernel.org
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pxa: remove raumfeld machine driver

These boards are now fully ported to devicetree and make use of the
simple-card driver, so the platform specific machine driver can be
removed.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: common: add ACPI matching tables for ICL

Entry needed for ICL RVP w/ RT274

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: use a generic node name for rt5631

The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: au8540: use 64-bit arithmetic instead of 32-bit

Add suffix ULL to constant 256 in order to give the compiler complete
information about the proper arithmetic to use.

Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

    256 * fs * 2 * mclk_src_scaling[i].param

Signed-off-by: Young_X <YangX92@hotmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pcm3168a: Don't disable pcm3168a when CONFIG_PM defined

pcm3168 codec support runtime_[resume|suspend], whenever it
is not active, it enters suspend mode, and it's clock and regulators
will be disabled. so there is no need to disable them again in
remove callback.  Otherwise we got following kernel warnings,
when unload pcm3168a driver

[  222.257514] unbalanced disables for amp-en-regulator
[  222.262526] ------------[ cut here ]------------
[  222.267158] WARNING: CPU: 0 PID: 2423 at drivers/regulator/core.c:2264 _regulator_disable+0x28/0x108
[  222.276291] Modules linked in:
[  222.279343]  snd_soc_pcm3168a_i2c(-)
[  222.282916]  snd_aloop
[  222.285272]  arc4
[  222.287194]  wl18xx
[  222.289289]  wlcore
[  222.291385]  mac80211
[  222.293654]  cfg80211
[  222.295923]  aes_ce_blk
[  222.298366]  crypto_simd
[  222.300896]  cryptd
[  222.302992]  aes_ce_cipher
[  222.305696]  crc32_ce
[  222.307965]  ghash_ce
[  222.310234]  aes_arm64
[  222.312590]  gf128mul
[  222.314860]  snd_soc_rcar
[  222.317476]  sha2_ce
[  222.319658]  xhci_plat_hcd
[  222.322362]  sha256_arm64
[  222.324978]  xhci_hcd
[  222.327247]  sha1_ce
[  222.329430]  renesas_usbhs
[  222.332133]  evdev
[  222.334142]  sha1_generic
[  222.336758]  rcar_gen3_thermal
[  222.339810]  cpufreq_dt
[  222.342253]  ravb_streaming(C)
[  222.345304]  wlcore_sdio
[  222.347834]  thermal_sys
[  222.350363]  udc_core
[  222.352632]  mch_core(C)
[  222.355161]  usb_dmac
[  222.357430]  snd_soc_pcm3168a
[  222.360394]  snd_soc_ak4613
[  222.363184]  gpio_keys
[  222.365540]  virt_dma
[  222.367809]  nfsd
[  222.369730]  ipv6
[  222.371652]  autofs4
[  222.373834]  [last unloaded: snd_soc_pcm3168a_i2c]
[  222.378629] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  222.388196] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  222.396199] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  222.402117] PC is at _regulator_disable+0x28/0x108
[  222.406906] LR is at _regulator_disable+0x28/0x108
[  222.411695] pc : [<ffff0000083bd89c>] lr : [<ffff0000083bd89c>] pstate: 00000145
[  222.419089] sp : ffff00000a0a3c80
[  222.422401] x29: ffff00000a0a3c80
[  222.425799] x28: ffff8006fa8c6200
[  222.429199] x27: ffff0000086f1000
[  222.432597] x26: 000000000000006a
[  222.435997] x25: 0000000000000124
[  222.439395] x24: 0000000000000018
[  222.442795] x23: 0000000000000006
[  222.446193] x22: ffff8006f925d490
[  222.449592] x21: ffff8006f9ac2068
[  222.452991] x20: ffff8006f9ac2000
[  222.456390] x19: 0000000000000005
[  222.459787] x18: 000000000000000a
[  222.463186] x17: 0000000000000000
[  222.466584] x16: 0000000000000000
[  222.469984] x15: 000000000d3f616a
[  222.473382] x14: 0720072007200720
[  222.476781] x13: 0720072007200720
[  222.480179] x12: 0720072007200720
[  222.483578] x11: 0720072007200720
[  222.486975] x10: 0720072007200720
[  222.490375] x9 : 0720072007200720
[  222.493773] x8 : 07200772076f0774
[  222.497172] x7 : 0000000000000000
[  222.500570] x6 : 0000000000000007
[  222.503969] x5 : 0000000000000000
[  222.507367] x4 : 0000000000000000
[  222.510766] x3 : 0000000000000000
[  222.514164] x2 : c790b852091e2600
[  222.517563] x1 : 0000000000000000
[  222.520961] x0 : 0000000000000028
[  222.524361] Call trace:
[  222.526805] Exception stack(0xffff00000a0a3b40 to 0xffff00000a0a3c80)
[  222.533245] 3b40: 0000000000000028 0000000000000000 c790b852091e2600 0000000000000000
[  222.541075] 3b60: 0000000000000000 0000000000000000 0000000000000007 0000000000000000
[  222.548905] 3b80: 07200772076f0774 0720072007200720 0720072007200720 0720072007200720
[  222.556735] 3ba0: 0720072007200720 0720072007200720 0720072007200720 000000000d3f616a
[  222.564564] 3bc0: 0000000000000000 0000000000000000 000000000000000a 0000000000000005
[  222.572394] 3be0: ffff8006f9ac2000 ffff8006f9ac2068 ffff8006f925d490 0000000000000006
[  222.580224] 3c00: 0000000000000018 0000000000000124 000000000000006a ffff0000086f1000
[  222.588053] 3c20: ffff8006fa8c6200 ffff00000a0a3c80 ffff0000083bd89c ffff00000a0a3c80
[  222.595883] 3c40: ffff0000083bd89c 0000000000000145 0000000000000000 0000000000000000
[  222.603713] 3c60: 0000ffffffffffff ffff00000a0a3c30 ffff00000a0a3c80 ffff0000083bd89c
[  222.611543] [<ffff0000083bd89c>] _regulator_disable+0x28/0x108
[  222.617375] [<ffff0000083bd9c4>] regulator_disable+0x48/0x68
[  222.623033] [<ffff0000083be8e4>] regulator_bulk_disable+0x58/0xc0
[  222.629134] [<ffff0000007d831c>] pcm3168a_remove+0x30/0x50 [snd_soc_pcm3168a]
[  222.636270] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  222.644106] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  222.649766] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  222.656640] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  222.661951] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  222.667609] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  222.673268] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  222.678666] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  222.687019] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  222.692850] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  222.699289] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  222.707119] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  222.714948] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  222.722778] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  222.730607] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  222.738436] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  222.746266] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  222.754096] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  222.761926] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  222.769755] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  222.777589] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  222.782899] ---[ end trace eaf8939a3698b1a8 ]---
[  222.787609] Failed to disable VCCDA2: -5
[  222.791649] ------------[ cut here ]------------
[  222.796283] WARNING: CPU: 0 PID: 2423 at drivers/clk/clk.c:595 clk_core_disable+0xc/0x1d8
[  222.804460] Modules linked in:
[  222.807511]  snd_soc_pcm3168a_i2c(-)
[  222.811083]  snd_aloop
[  222.813439]  arc4
[  222.815360]  wl18xx
[  222.817456]  wlcore
[  222.819551]  mac80211
[  222.821820]  cfg80211
[  222.824088]  aes_ce_blk
[  222.826531]  crypto_simd
[  222.829060]  cryptd
[  222.831155]  aes_ce_cipher
[  222.833859]  crc32_ce
[  222.836127]  ghash_ce
[  222.838396]  aes_arm64
[  222.840752]  gf128mul
[  222.843020]  snd_soc_rcar
[  222.845637]  sha2_ce
[  222.847818]  xhci_plat_hcd
[  222.850522]  sha256_arm64
[  222.853138]  xhci_hcd
[  222.855407]  sha1_ce
[  222.857589]  renesas_usbhs
[  222.860292]  evdev
[  222.862300]  sha1_generic
[  222.864917]  rcar_gen3_thermal
[  222.867968]  cpufreq_dt
[  222.870410]  ravb_streaming(C)
[  222.873461]  wlcore_sdio
[  222.875991]  thermal_sys
[  222.878520]  udc_core
[  222.880789]  mch_core(C)
[  222.883318]  usb_dmac
[  222.885587]  snd_soc_pcm3168a
[  222.888551]  snd_soc_ak4613
[  222.891341]  gpio_keys
[  222.893696]  virt_dma
[  222.895965]  nfsd
[  222.897886]  ipv6
[  222.899808]  autofs4
[  222.901990]  [last unloaded: snd_soc_pcm3168a_i2c]
[  222.906783] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  222.916349] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  222.924351] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  222.930270] PC is at clk_core_disable+0xc/0x1d8
[  222.934799] LR is at clk_core_disable_lock+0x20/0x34
[  222.939761] pc : [<ffff0000083ab9b8>] lr : [<ffff0000083acd28>] pstate: 800001c5
[  222.947154] sp : ffff00000a0a3cf0
[  222.950466] x29: ffff00000a0a3cf0
[  222.953864] x28: ffff8006fa8c6200
[  222.957263] x27: ffff0000086f1000
[  222.960661] x26: 000000000000006a
[  222.964061] x25: 0000000000000124
[  222.967458] x24: 0000000000000015
[  222.970858] x23: ffff8006f9ffa8d0
[  222.974256] x22: ffff8006faf16480
[  222.977655] x21: ffff0000007e7040
[  222.981053] x20: ffff8006faadd100
[  222.984452] x19: 0000000000000140
[  222.987850] x18: 000000000000000a
[  222.991249] x17: 0000000000000000
[  222.994647] x16: 0000000000000000
[  222.998046] x15: 000000000d477819
[  223.001444] x14: 0720072007200720
[  223.004843] x13: 0720072007200720
[  223.008242] x12: 0720072007200720
[  223.011641] x11: 0720072007200720
[  223.015039] x10: 0720072007200720
[  223.018438] x9 : 0720072007200720
[  223.021837] x8 : 0720072007200720
[  223.025236] x7 : 0000000000000000
[  223.028634] x6 : 0000000000000007
[  223.032034] x5 : 0000000000000000
[  223.035432] x4 : 0000000000000000
[  223.038831] x3 : 0000000000000000
[  223.042229] x2 : 0000000004720471
[  223.045628] x1 : 0000000000000000
[  223.049026] x0 : ffff8006faadd100
[  223.052426] Call trace:
[  223.054870] Exception stack(0xffff00000a0a3bb0 to 0xffff00000a0a3cf0)
[  223.061309] 3ba0:                                   ffff8006faadd100 0000000000000000
[  223.069139] 3bc0: 0000000004720471 0000000000000000 0000000000000000 0000000000000000
[  223.076969] 3be0: 0000000000000007 0000000000000000 0720072007200720 0720072007200720
[  223.084798] 3c00: 0720072007200720 0720072007200720 0720072007200720 0720072007200720
[  223.092628] 3c20: 0720072007200720 000000000d477819 0000000000000000 0000000000000000
[  223.100458] 3c40: 000000000000000a 0000000000000140 ffff8006faadd100 ffff0000007e7040
[  223.108287] 3c60: ffff8006faf16480 ffff8006f9ffa8d0 0000000000000015 0000000000000124
[  223.116117] 3c80: 000000000000006a ffff0000086f1000 ffff8006fa8c6200 ffff00000a0a3cf0
[  223.123947] 3ca0: ffff0000083acd28 ffff00000a0a3cf0 ffff0000083ab9b8 00000000800001c5
[  223.131777] 3cc0: ffff00000a0a3cf0 ffff0000083acd1c 0000ffffffffffff ffff8006faadd100
[  223.139606] 3ce0: ffff00000a0a3cf0 ffff0000083ab9b8
[  223.144483] [<ffff0000083ab9b8>] clk_core_disable+0xc/0x1d8
[  223.150054] [<ffff0000083acd58>] clk_disable+0x1c/0x28
[  223.155198] [<ffff0000007d8328>] pcm3168a_remove+0x3c/0x50 [snd_soc_pcm3168a]
[  223.162334] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  223.170167] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  223.175826] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  223.182700] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  223.188012] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  223.193669] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  223.199329] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  223.204726] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  223.213079] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  223.218909] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  223.225349] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  223.233179] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  223.241008] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  223.248838] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  223.256668] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  223.264497] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  223.272327] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  223.280157] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  223.287986] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  223.295816] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  223.303648] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  223.308958] ---[ end trace eaf8939a3698b1a9 ]---
[  223.313752] ------------[ cut here ]------------
[  223.318383] WARNING: CPU: 0 PID: 2423 at drivers/clk/clk.c:477 clk_core_unprepare+0xc/0x1ac
[  223.326733] Modules linked in:
[  223.329784]  snd_soc_pcm3168a_i2c(-)
[  223.333356]  snd_aloop
[  223.335712]  arc4
[  223.337633]  wl18xx
[  223.339728]  wlcore
[  223.341823]  mac80211
[  223.344092]  cfg80211
[  223.346360]  aes_ce_blk
[  223.348803]  crypto_simd
[  223.351332]  cryptd
[  223.353428]  aes_ce_cipher
[  223.356131]  crc32_ce
[  223.358400]  ghash_ce
[  223.360668]  aes_arm64
[  223.363024]  gf128mul
[  223.365293]  snd_soc_rcar
[  223.367909]  sha2_ce
[  223.370091]  xhci_plat_hcd
[  223.372794]  sha256_arm64
[  223.375410]  xhci_hcd
[  223.377679]  sha1_ce
[  223.379861]  renesas_usbhs
[  223.382564]  evdev
[  223.384572]  sha1_generic
[  223.387188]  rcar_gen3_thermal
[  223.390239]  cpufreq_dt
[  223.392682]  ravb_streaming(C)
[  223.395732]  wlcore_sdio
[  223.398261]  thermal_sys
[  223.400790]  udc_core
[  223.403059]  mch_core(C)
[  223.405588]  usb_dmac
[  223.407856]  snd_soc_pcm3168a
[  223.410820]  snd_soc_ak4613
[  223.413609]  gpio_keys
[  223.415965]  virt_dma
[  223.418234]  nfsd
[  223.420155]  ipv6
[  223.422076]  autofs4
[  223.424258]  [last unloaded: snd_soc_pcm3168a_i2c]
[  223.429050] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  223.438616] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  223.446618] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  223.452536] PC is at clk_core_unprepare+0xc/0x1ac
[  223.457239] LR is at clk_unprepare+0x28/0x3c
[  223.461506] pc : [<ffff0000083ab5a4>] lr : [<ffff0000083ace4c>] pstate: 60000145
[  223.468900] sp : ffff00000a0a3d00
[  223.472211] x29: ffff00000a0a3d00
[  223.475609] x28: ffff8006fa8c6200
[  223.479009] x27: ffff0000086f1000
[  223.482407] x26: 000000000000006a
[  223.485807] x25: 0000000000000124
[  223.489205] x24: 0000000000000015
[  223.492604] x23: ffff8006f9ffa8d0
[  223.496003] x22: ffff8006faf16480
[  223.499402] x21: ffff0000007e7040
[  223.502800] x20: ffff8006faf16420
[  223.506199] x19: ffff8006faadd100
[  223.509597] x18: 000000000000000a
[  223.512997] x17: 0000000000000000
[  223.516395] x16: 0000000000000000
[  223.519794] x15: 0000000000000000
[  223.523192] x14: 00000033fe89076c
[  223.526591] x13: 0000000000000400
[  223.529989] x12: 0000000000000400
[  223.533388] x11: 0000000000000000
[  223.536786] x10: 00000000000009e0
[  223.540185] x9 : ffff00000a0a3be0
[  223.543583] x8 : ffff8006fa8c6c40
[  223.546982] x7 : ffff8006fa8c6400
[  223.550380] x6 : 0000000000000001
[  223.553780] x5 : 0000000000000000
[  223.557178] x4 : ffff8006fa8c6200
[  223.560577] x3 : 0000000000000000
[  223.563975] x2 : ffff8006fa8c6200
[  223.567374] x1 : 0000000000000000
[  223.570772] x0 : ffff8006faadd100
[  223.574170] Call trace:
[  223.576615] Exception stack(0xffff00000a0a3bc0 to 0xffff00000a0a3d00)
[  223.583054] 3bc0: ffff8006faadd100 0000000000000000 ffff8006fa8c6200 0000000000000000
[  223.590884] 3be0: ffff8006fa8c6200 0000000000000000 0000000000000001 ffff8006fa8c6400
[  223.598714] 3c00: ffff8006fa8c6c40 ffff00000a0a3be0 00000000000009e0 0000000000000000
[  223.606544] 3c20: 0000000000000400 0000000000000400 00000033fe89076c 0000000000000000
[  223.614374] 3c40: 0000000000000000 0000000000000000 000000000000000a ffff8006faadd100
[  223.622204] 3c60: ffff8006faf16420 ffff0000007e7040 ffff8006faf16480 ffff8006f9ffa8d0
[  223.630033] 3c80: 0000000000000015 0000000000000124 000000000000006a ffff0000086f1000
[  223.637863] 3ca0: ffff8006fa8c6200 ffff00000a0a3d00 ffff0000083ace4c ffff00000a0a3d00
[  223.645693] 3cc0: ffff0000083ab5a4 0000000060000145 0000000000000140 ffff8006faadd100
[  223.653523] 3ce0: 0000ffffffffffff ffff0000083ace44 ffff00000a0a3d00 ffff0000083ab5a4
[  223.661353] [<ffff0000083ab5a4>] clk_core_unprepare+0xc/0x1ac
[  223.667103] [<ffff0000007d8330>] pcm3168a_remove+0x44/0x50 [snd_soc_pcm3168a]
[  223.674239] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  223.682070] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  223.687731] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  223.694604] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  223.699915] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  223.705572] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  223.711230] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  223.716628] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  223.724980] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  223.730811] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  223.737250] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  223.745079] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  223.752909] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  223.760739] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  223.768568] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  223.776398] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  223.784227] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  223.792057] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  223.799886] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  223.807715] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  223.815546] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  223.820855] ---[ end trace eaf8939a3698b1aa ]---

Fix this issue by only disable clock and regulators in remove callback
when CONFIG_PM isn't defined

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dmic: introduce module_param wakeup_delay

Introducing a module param for wakeup_delay in order to
align with modeswitch_delay parameter. With this change, both
wakeup_delay and modeswitch_delay parameters can be passed
as module parameters.

Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dmic: introduce mode switch delay

On startup, applications such as PulseAudio or CRAS enable playback or
capture on all PCM devices to verify that configurations are correct,
and close them immediately. For DMICs, this can result in the clock
being turned off very quickly, which may not compatible with internal
state machine transition requirements.

This patch add a mode-switch delay which will prevent the clock from
being turned off without complying with manufacturer timing
specifications. While the DMIC clock may be controlled at a lower level,
be it with hardware or firmware, applying the delay during the
STOP_TRIGGER phase ensures that there is no race condition, e.g. with
the hardware/firmware turning off the clock earlier

Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: sound: omap-mcpdm: Update documentation for pdmclk

McPDM module receives it's functional clock from external source. This
clock is the pdmclk provided by the twl6040 audio IC. If the clock is not
available all register accesses to McPDM fails and the module is not
operational.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qcom: sdm845: Create and setup jack in init callback

Add a callback for init ops on dai_link to create and setup jack.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qcom: sdm845: Add board specific dapm widgets

Add board specific dapm widgets so these widgets can be used
in the route.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: davinci-mcasp: Implement configurable dismod handling

If the dismod is specified in the DT node, use the specified custom value
to configure the drive on state of the inactive TX slots.

If the dismod is not present or booted in legacy mode, the dismod is set
to low as it was the original behavior.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: davinci-mcasp: Document dismod optional property

The dismod property can be used to specify the drive on level of inactive
TX slots.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: davinci-mcasp: Update PDIR (pin direction) register handling

When McASP is master and the PDIR for the clock pins are configured as
outputs before the clocking is configured it will output whatever clock
is generated at the moment internally.
The clock will switch to the correct rate only when the we start the clock
generators.

To avoid this we must only set the pin as output after the clock is
configured and enabled.

AXR pins configured as outputs behaves somehow interesting as well:
when McASP is not enabled and the pin is selected as output it will not
honor the DISMOD settings for the inactive state, but will pull the pin
down.

Add a new bitfield and mark the pins there which needs to be output and
set the pins only at the time when they will behave correctly.

On stream stop configure the pins back to input which makes them to obey
the global pin configuration regarding to pull up/down.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: davinci-mcasp: Clear TXSTAT register before activating serializers

Follow the guideline from the TRM:
Before starting, clear the respective transmitter and receiver status
registers

To avoid stale state stored in the status registers.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPC

If mclk/sclk is already running, FW responds with IPC reply MCLK/SCLK
already running. Add these to the IPC reply lookup table.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Make DSP replies more human readable

Add more meaning to the IPC replies for easy debugging. Replace the switch
case with a lookup table to lookup for the IPC replies and print in human
readable form.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()

Current rsnd dvc.c is using flags to avoid duplicating register for
MIXer case. OTOH, commit e894efef9ac7 ("ASoC: core: add support to card
rebind") allows to rebind sound card without rebinding all drivers.

Because of above patch and dvc.c flags, it can't re-register kctrl if
only sound card was rebinded, because dvc is keeping old flags.
(Of course it will be no problem if rsnd driver also be rebinded,
but it is not purpose of above patch).

This patch checks current card registered kctrl when registering.
In MIXer case, it can avoid duplicate register if card already has same
kctrl. In rebind case, it can re-register kctrl because card registered
kctl had been removed when unbinding.

This patch is updated version of commit b918f1bc7f1ce ("ASoC: rsnd: DVC
kctrl sets once")

Reported-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9867: Fix whitespace

Minor changes to match coding style.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc.h: makes snd_soc_of_parse_audio_prefix() inline

commit 3b7103562c03c ("ASoC: soc-core: add
snd_soc_of_parse_node_prefix()") maked snd_soc_of_parse_audio_prefix()
as #define. But it'd be better to make this a static inline rather than
a #define. It helps with error messages and type safety.
This patch makes it inline.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: tidyup for SSIU subnode

commit da48a6eb82ea2 ("ASoC: rsnd: add SSIU BUSIF support for
Document") updated Documentation for SSIU, but 1) we want to
keep old/deprecated DMA description, 2) it is missing SSIU
subnode properties. This patch tidyup these

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: Fix a NULL vs IS_ERR() check in probe

The platform_device_register_full() function doesn't return NULL, it
returns error pointers.

Fixes: 7894a7e7ea3d ("ASoC: amd: create ACP3x PCM platform device")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>