git.openwrt.org Git - openwrt/staging/blogic.git/log

tipc: simplify stale link failure criteria

In commit a4dc70d46cf1 ("tipc: extend link reset criteria for stale
packet retransmission") we made link retransmission failure events
dependent on the link tolerance, and not only of the number of failed
retransmission attempts, as we did earlier. This works well. However,
keeping the original, additional criteria of 99 failed retransmissions
is now redundant, and may in some cases lead to failure detection
times in the order of minutes instead of the expected 1.5 sec link
tolerance value.

We now remove this criteria altogether.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tc-testing: Restore original behaviour for namespaces in tdc

This patch restores the original behaviour for tdc prior to the
introduction of the plugin system, where the network namespace
functionality was split from the main script.

It introduces the concept of required plugins for testcases,
and will automatically load any plugin that isn't already
enabled when said plugin is required by even one testcase.

Additionally, the -n option for the nsPlugin is deprecated
so the default action is to make use of the namespaces.
Instead, we introduce -N to not use them, but still create
the veth pair.

buildebpfPlugin's -B option is also deprecated.

If a test cases requires the features of a specific plugin
in order to pass, it should instead include a new key/value
pair describing plugin interactions:

 "plugins": {
 "requires": "buildebpfPlugin"
 },

A test case can have more than one required plugin: a list
can be inserted as the value for 'requires'.

Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patches contains Netfilter updates for net-next:

1) .br_defrag indirection depends on CONFIG_NF_DEFRAG_IPV6, from wenxu.

2) Remove unnecessary memset() in ipset, from Florent Fourcot.

3) Merge control plane addition and deletion in ipset, also from Florent.

4) A few missing check for nla_parse() in ipset, from Aditya Pakki
 and Jozsef Kadlecsik.

5) Incorrect cleanup in error path of xt_set version 3, from Jozsef.

6) Memory accounting problems when resizing in ipset, from Stefano Brivio.

7) Jozsef updates his email to @netfilter.org, this batch comes with a
 conflict resolution with recent SPDX header updates.

8) Add to create custom conntrack expectations via nftables, from
 Stephane Veyret.

9) A lookup optimization for conntrack, from Florian Westphal.

10) Check for supported flags in xt_owner.

11) Support for pernet sysctl in br_netfilter, patches
 from Christian Brauner.

12) Patches to move common synproxy infrastructure to nf_synproxy.c,
 to prepare the synproxy support for nf_tables, patches from
 Fernando Fernandez Mancera.

13) Support to restore expiration time in set element, from Laura Garcia.

14) Fix recent rewrite of netfilter IPv6 to avoid indirections
 when CONFIG_IPV6 is unset, from Arnd Bergmann.

15) Always reset vlan tag on skbuff fraglist when refragmenting in
 bridge conntrack, from wenxu.

16) Support to match IPv4 options in nf_tables, from Stephen Suryaputra.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net-next

Resolve conflict between d2912cb15bdd ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 500") removing the GPL disclaimer
and fe03d4745675 ("Update my email address") which updates Jozsef
Kadlecsik's email.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch 'cxgb4-Reference-count-MPS-TCAM-entries-within-a-PF'

Raju Rangoju says:

====================
cxgb4: Reference count MPS TCAM entries within a PF

Firmware reference counts the MPS TCAM entries by PF and VF,
but it does not do it for usage within a PF or VF. This patch
adds the support to track MPS TCAM entries within a PF.

v2->v3:
Fixed the compiler errors due to incorrect patch
Also, removed the new blank line at EOF
v1->v2:
Use refcount_t type instead of atomic_t for mps reference count
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: Add MPS refcounting for alloc/free mac filters

This patch adds reference counting support for
alloc/free mac filters

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: Add MPS TCAM refcounting for cxgb4 change mac

This patch adds TCAM reference counting
support for cxgb4 change mac path

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: Add MPS TCAM refcounting for raw mac filters

This patch adds TCAM reference counting
support for raw mac filters.

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: Re-work the logic for mps refcounting

Remove existing mps refcounting code which was
added only for encap filters and add necessary
data structures/functions to support mps reference
counting for all the mac filters. Also add wrapper
functions for allocating and freeing encap mac
filters.

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: sun8i: force select external PHY when no internal one

The PHY selection bit also exists on SoCs without an internal PHY; if it's
set to 1 (internal PHY, default value) then the MAC will not make use of
any PHY on such SoCs.

This problem appears when adapting for H6, which has no real internal PHY
(the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
connected via RMII interface at GPIO bank A).

Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
to address the problem of a wrong default value.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: sun8i: add support for Allwinner H6 EMAC

The EMAC on Allwinner H6 is just like the one on A64. The "internal PHY" on
H6 is on a co-packaged AC200 chip, and it's not really internal (it's
connected via RMII at PA GPIO bank).

Add support for the Allwinner H6 EMAC in the dwmac-sun8i driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'cached-route-listings'

Stefano Brivio says:

====================
Fix listing (IPv4, IPv6) and flushing (IPv6) of cached route exceptions

For IPv6 cached routes, the commands 'ip -6 route list cache' and
'ip -6 route flush cache' don't work at all after route exceptions have
been moved to a separate hash table in commit 2b760fcf5cfb ("ipv6: hook
up exception table to store dst cache").

For IPv4 cached routes, the command 'ip route list cache' has also
stopped working in kernel 3.5 after commit 4895c771c7f0 ("ipv4: Add FIB
nexthop exceptions.") introduced storage for route exceptions as a
separate entity.

Fix this by allowing userspace to clearly request cached routes with
the RTM_F_CLONED flag used as a filter (in conjuction with strict
checking) and by retrieving and dumping cached routes if requested.

If strict checking is not requested (iproute2 < 5.0.0), we don't have a
way to consistently filter results on other selectors (e.g. on tables),
so skip filtering entirely and dump both regular routes and exceptions.

For IPv4, cache flushing uses a completely different mechanism, so it
wasn't affected. Listing of exception routes (modified routes pre-3.5) was
tested against these versions of kernel and iproute2:

 iproute2
kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0
3.5-rc4 + + + + +
4.4
4.9
4.14
4.15
4.19
5.0
5.1
fixed + + + + +

For IPv6, a separate iproute2 patch is required. Versions of iproute2
and kernel tested:

 iproute2
kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 5.1.0, patched
3.18 list + + + + + +
 flush + + + + + +
4.4 list + + + + + +
 flush + + + + + +
4.9 list + + + + + +
 flush + + + + + +
4.14 list + + + + + +
 flush + + + + + +
4.15 list
 flush
4.19 list
 flush
5.0 list
 flush
5.1 list
 flush
with list + + + + + +
fix flush + + + +

v7: Make sure r->rtm_tos is initialised in 3/11, move loop over nexthop
 objects in 4/11, add comments about usage of "skip" counters in commit
 messages of 4/11 and 8/11

v6: Target for net-next, rebase and adapt to nexthop objects for IPv6 paths.
 Merge selftests into this series (as they were addressed for net-next).
 A number of minor changes detailed in logs of single patches.

v5: Skip filtering altogether if no strict checking is requested: selecting
 routes or exceptions only would be inconsistent with the fact we can't
 filter on tables. Drop 1/8 (non-strict dump filter function no longer
 needed), replace 2/8 (don't use NLM_F_MATCH, decide to skip routes or
 exceptions in filter function), drop 6/8 (2/8 is enough for IPv6 too).
 Introduce dump_routes and dump_exceptions flags in filter, adapt other
 patches to that.

v4: Fix the listing issue also for IPv4, making the behaviour consistent
 with IPv6. Honour NLM_F_MATCH as per RFC 3549 and allow usage of
 RTM_F_CLONED filter. Split patches into smaller logical changes.

v3: Drop check on RTM_F_CLONED and rework logic of return values of
 rt6_dump_route()

v2: Add count of routes handled in partial dumps, and skip them, in patch 1/2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: pmtu: Make list_flush_ipv6_exception test more demanding

Instead of just listing and flushing two cached exceptions, create
a relatively big number of them, and count how many are listed. Single
netlink dump messages contain approximately 25 entries each, and this
way we can make sure the partial dump tracking mechanism is working
properly.

While at it, also ensure that no cached routes can be listed after
flush, and remove 'sleep 1' calls, they are not actually needed.

v7: No changes

v6:
- Merge this patch into series including fix, as it's also targeted
for net-next. No actual changes

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: pmtu: Introduce list_flush_ipv4_exception test case

This test checks that route exceptions can be successfully listed and
flushed using ip -6 route {list,flush} cache.

v7: No changes

v6:
 - Merge this patch into series including fix, as it's also targeted
 for net-next
 - Drop left-over print of 'ip route list cache | wc -l'

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_fib: Don't discard nodes with valid routing information in fib6_locate_1()

When we perform an inexact match on FIB nodes via fib6_locate_1(), longer
prefixes will be preferred to shorter ones. However, it might happen that
a node, with higher fn_bit value than some other, has no valid routing
information.

In this case, we'll pick that node, but it will be discarded by the check
on RTN_RTINFO in fib6_locate(), and we might miss nodes with valid routing
information but with lower fn_bit value.

This is apparent when a routing exception is created for a default route:
# ip -6 route list
fc00:1::/64 dev veth_A-R1 proto kernel metric 256 pref medium
fc00:2::/64 dev veth_A-R2 proto kernel metric 256 pref medium
fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 pref medium
fe80::/64 dev veth_A-R1 proto kernel metric 256 pref medium
fe80::/64 dev veth_A-R2 proto kernel metric 256 pref medium
default via fc00:1::2 dev veth_A-R1 metric 1024 pref medium
# ip -6 route list cache
fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 expires 593sec mtu 1500 pref medium
fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 593sec mtu 1500 pref medium
# ip -6 route flush cache # node for default route is discarded
Failed to send flush request: No such process
# ip -6 route list cache
fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 586sec mtu 1500 pref medium

Check right away if the node has a RTN_RTINFO flag, before replacing the
'prev' pointer, that indicates the longest matching prefix found so far.

Fixes: 38fbeeeeccdb ("ipv6: prepare fib6_locate() for exception table")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Dump route exceptions if requested

Since commit 2b760fcf5cfb ("ipv6: hook up exception table to store dst
cache"), route exceptions reside in a separate hash table, and won't be
found by walking the FIB, so they won't be dumped to userspace on a
RTM_GETROUTE message.

This causes 'ip -6 route list cache' and 'ip -6 route flush cache' to
have no function anymore:

# ip -6 route get fc00:3::1
fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 539sec mtu 1400 pref medium
# ip -6 route get fc00:4::1
fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 536sec mtu 1500 pref medium
# ip -6 route list cache
# ip -6 route flush cache
# ip -6 route get fc00:3::1
fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 520sec mtu 1400 pref medium
# ip -6 route get fc00:4::1
fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 519sec mtu 1500 pref medium

because iproute2 lists cached routes using RTM_GETROUTE, and flushes them
by listing all the routes, and deleting them with RTM_DELROUTE one by one.

If cached routes are requested using the RTM_F_CLONED flag together with
strict checking, or if no strict checking is requested (and hence we can't
consistently apply filters), look up exceptions in the hash table
associated with the current fib6_info in rt6_dump_route(), and, if present
and not expired, add them to the dump.

We might be unable to dump all the entries for a given node in a single
message, so keep track of how many entries were handled for the current
node in fib6_walker, and skip that amount in case we start from the same
partially dumped node.

When a partial dump restarts, as the starting node might change when
'sernum' changes, we have no guarantee that we need to skip the same
amount of in-node entries. Therefore, we need two counters, and we need to
zero the in-node counter if the node from which the dump is resumed
differs.

Note that, with the current version of iproute2, this only fixes the
'ip -6 route list cache': on a flush command, iproute2 doesn't pass
RTM_F_CLONED and, due to this inconsistency, 'ip -6 route flush cache' is
still unable to fetch the routes to be flushed. This will be addressed in
a patch for iproute2.

To flush cached routes, a procfs entry could be introduced instead: that's
how it works for IPv4. We already have a rt6_flush_exception() function
ready to be wired to it. However, this would not solve the issue for
listing.

Versions of iproute2 and kernel tested:

 iproute2
kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 5.1.0, patched
3.18 list + + + + + +
 flush + + + + + +
4.4 list + + + + + +
 flush + + + + + +
4.9 list + + + + + +
 flush + + + + + +
4.14 list + + + + + +
 flush + + + + + +
4.15 list
 flush
4.19 list
 flush
5.0 list
 flush
5.1 list
 flush
with list + + + + + +
fix flush + + + +

v7:
 - Explain usage of "skip" counters in commit message (suggested by
 David Ahern)

v6:
 - Rebase onto net-next, use recently introduced nexthop walker
 - Make rt6_nh_dump_exceptions() a separate function (suggested by David
 Ahern)

v5:
 - Use dump_routes and dump_exceptions from filter, ignore NLM_F_MATCH,
 update test results (flushing works with iproute2 < 5.0.0 now)

v4:
 - Split NLM_F_MATCH and strict check handling in separate patches
 - Filter routes using RTM_F_CLONED: if it's not set, only return
 non-cached routes, and if it's set, only return cached routes:
 change requested by David Ahern and Martin Lau. This implies that
 iproute2 needs a separate patch to be able to flush IPv6 cached
 routes. This is not ideal because we can't fix the breakage caused
 by 2b760fcf5cfb entirely in kernel. However, two years have passed
 since then, and this makes it more tolerable

v3:
 - More descriptive comment about expired exceptions in rt6_dump_route()
 - Swap return values of rt6_dump_route() (suggested by Martin Lau)
 - Don't zero skip_in_node in case we don't dump anything in a given pass
 (also suggested by Martin Lau)
 - Remove check on RTM_F_CLONED altogether: in the current UAPI semantic,
 it's just a flag to indicate the route was cloned, not to filter on
 routes

v2: Add tracking of number of entries to be skipped in current node after
 a partial dump. As we restart from the same node, if not all the
 exceptions for a given node fit in a single message, the dump will
 not terminate, as suggested by Martin Lau. This is a concrete
 possibility, setting up a big number of exceptions for the same route
 actually causes the issue, suggested by David Ahern.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6/route: Change return code of rt6_dump_route() for partial node dumps

In the next patch, we are going to add optional dump of exceptions to
rt6_dump_route().

Change the return code of rt6_dump_route() to accomodate partial node
dumps: we might dump multiple routes per node, and might be able to dump
only a given number of them, so fib6_dump_node() will need to know how
many routes have been dumped on partial dump, to restart the dump from the
point where it was interrupted.

Note that fib6_dump_node() is the only caller and already handles all
non-negative return codes as success: those become -1 to signal that we're
done with the node. If we fail, return 0, as we were unable to dump the
single route in the node, but we're not done with it.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6/route: Don't match on fc_nh_id if not set in ip6_route_del()

If fc_nh_id isn't set, we shouldn't try to match against it. This
actually matters just for the RTF_CACHE below (where this case is
already handled): if iproute2 gets a route exception and tries to
delete it, it won't reference it by fc_nh_id, even if a nexthop
object might be associated to the originating route.

Fixes: 5b98324ebe29 ("ipv6: Allow routes to use nexthop objects")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net/ipv6: Bail early if user only wants cloned entries"

This reverts commit 08e814c9e8eb5a982cbd1e8f6bd255d97c51026f: as we
are preparing to fix listing and dumping of IPv6 cached routes, we
need to allow RTM_F_CLONED as a flag to match routes against while
dumping them.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Dump route exceptions if requested

Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached
exception routes are stored as a separate entity, so they are not dumped
on a FIB dump, even if the RTM_F_CLONED flag is passed.

This implies that the command 'ip route list cache' doesn't return any
result anymore.

If the RTM_F_CLONED is passed, and strict checking requested, retrieve
nexthop exception routes and dump them. If no strict checking is
requested, filtering can't be performed consistently: dump everything in
that case.

With this, we need to add an argument to the netlink callback in order to
track how many entries were already dumped for the last leaf included in
a partial netlink dump.

A single additional argument is sufficient, even if we traverse logically
nested structures (nexthop objects, hash table buckets, bucket chains): it
doesn't matter if we stop in the middle of any of those, because they are
always traversed the same way. As an example, s_i values in [], s_fa
values in ():

 node (fa) #1 [1]
 nexthop #1
 bucket #1 -> #0 in chain (1)
 bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4)
 bucket #3 -> #0 in chain (5) -> #1 in chain (6)

 nexthop #2
 bucket #1 -> #0 in chain (7) -> #1 in chain (8)
 bucket #2 -> #0 in chain (9)
 --
 node (fa) #2 [2]
 nexthop #1
 bucket #1 -> #0 in chain (1) -> #1 in chain (2)
 bucket #2 -> #0 in chain (3)

it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2)
for "node #2": walking flattens all that.

It would even be possible to drop the distinction between the in-tree
(s_i) and in-node (s_fa) counter, but a further improvement might
advise against this. This is only as accurate as the existing tracking
mechanism for leaves: if a partial dump is restarted after exceptions
are removed or expired, we might skip some non-dumped entries.

To improve this, we could attach a 'sernum' attribute (similar to the
one used for IPv6) to nexthop entities, and bump this counter whenever
exceptions change: having a distinction between the two counters would
make this more convenient.

Listing of exception routes (modified routes pre-3.5) was tested against
these versions of kernel and iproute2:

 iproute2
kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0
3.5-rc4 + + + + +
4.4
4.9
4.14
4.15
4.19
5.0
5.1
fixed + + + + +

v7:
 - Move loop over nexthop objects to route.c, and pass struct fib_info
 and table ID to it, not a struct fib_alias (suggested by David Ahern)
 - While at it, note that the NULL check on fa->fa_info is redundant,
 and the check on RTNH_F_DEAD is also not consistent with what's done
 with regular route listing: just keep it for nhc_flags
 - Rename entry point function for dumping exceptions to
 fib_dump_info_fnhe(), and rearrange arguments for consistency with
 fib_dump_info()
 - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle
 one bucket at a time
 - Expand commit message to describe why we can have a single "skip"
 counter for all exceptions stored in bucket chains in nexthop objects
 (suggested by David Ahern)

v6:
 - Rebased onto net-next
 - Loop over nexthop paths too. Move loop over fnhe buckets to route.c,
 avoids need to export rt_fill_info() and to touch exceptions from
 fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that
 (suggested by David Ahern)

Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4/route: Allow NULL flowinfo in rt_fill_info()

In the next patch, we're going to use rt_fill_info() to dump exception
routes upon RTM_GETROUTE with NLM_F_ROOT, meaning userspace is requesting
a dump and not a specific route selection, which in turn implies the input
interface is not relevant. Update rt_fill_info() to handle a NULL
flowinfo.

v7: If fl4 is NULL, explicitly set r->rtm_tos to 0: it's not initialised
otherwise (spotted by David Ahern)

v6: New patch

Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4/fib_frontend: Allow RTM_F_CLONED flag to be used for filtering

This functionally reverts the check introduced by commit
e8ba330ac0c5 ("rtnetlink: Update fib dumps for strict data checking")
as modified by commit e4e92fb160d7 ("net/ipv4: Bail early if user only
wants prefix entries").

As we are preparing to fix listing of IPv4 cached routes, we need to
give userspace a way to request them.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONED

The following patches add back the ability to dump IPv4 and IPv6 exception
routes, and we need to allow selection of regular routes or exceptions.

Use RTM_F_CLONED as filter to decide whether to dump routes or exceptions:
iproute2 passes it in dump requests (except for IPv6 cache flush requests,
this will be fixed in iproute2) and this used to work as long as
exceptions were stored directly in the FIB, for both IPv4 and IPv6.

Caveat: if strict checking is not requested (that is, if the dump request
doesn't go through ip_valid_fib_dump_req()), we can't filter on protocol,
tables or route types.

In this case, filtering on RTM_F_CLONED would be inconsistent: we would
fix 'ip route list cache' by returning exception routes and at the same
time introduce another bug in case another selector is present, e.g. on
'ip route list cache table main' we would return all exception routes,
without filtering on tables.

Keep this consistent by applying no filters at all, and dumping both
routes and exceptions, if strict checking is not requested. iproute2
currently filters results anyway, and no unwanted results will be
presented to the user. The kernel will just dump more data than needed.

v7: No changes

v6: Rebase onto net-next, no changes

v5: New patch: add dump_routes and dump_exceptions flags in filter and
 simply clear the unwanted one if strict checking is enabled, don't
 ignore NLM_F_MATCH and don't set filter_set if NLM_F_MATCH is set.
 Skip filtering altogether if no strict checking is requested:
 selecting routes or exceptions only would be inconsistent with the
 fact we can't filter on tables.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: use GRO

This patch updates the macb driver to use NAPI GRO helpers when
receiving SKBs. This improves performances.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: use NAPI_POLL_WEIGHT

Use NAPI_POLL_WEIGHT, the default NAPI poll() weight instead of
redefining our own value (which turns out to be 64 as well).

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ipv4-fix-bugs-when-enable-route_localnet'

Shijie Luo says:

====================
ipv4: fix bugs when enable route_localnet

When enable route_localnet, route of the 127/8 address is enabled.
But in some situations like arp_announce=2, ARP requests or reply
work abnormally.

This patchset fix some bugs when enable route_localnet.

Change History:
V2:
- Change a single patch to a patchset.
- Add bug fix for arp_ignore = 3.
- Add a couple of test for enabling route_localnet in selftests.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: add route_localnet test script

Add a simple scripts to exercise several situations when enable
route_localnet.

Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Zhiqiang liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: fix confirm_addr_indev() when enable route_localnet

When arp_ignore=3, the NIC won't reply for scope host addresses, but
if enable route_locanet, we need to reply ip address with head 127 and
scope RT_SCOPE_HOST.

Fixes: d0daebc3d622 ("ipv4: Add interface option to enable routing of 127.0.0.0/8")
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: fix inet_select_addr() when enable route_localnet

Suppose we have two interfaces eth0 and eth1 in two hosts, follow
the same steps in the two hosts:
# sysctl -w net.ipv4.conf.eth1.route_localnet=1
# sysctl -w net.ipv4.conf.eth1.arp_announce=2
# ip route del 127.0.0.0/8 dev lo table local
and then set ip to eth1 in host1 like:
# ifconfig eth1 127.25.3.4/24
set ip to eth2 in host2 and ping host1:
# ifconfig eth1 127.25.3.14/24
# ping -I eth1 127.25.3.4
Well, host2 cannot connect to host1.

When set a ip address with head 127, the scope of the address defaults
to RT_SCOPE_HOST. In this situation, host2 will use arp_solicit() to
send a arp request for the mac address of host1 with ip
address 127.25.3.14. When arp_announce=2, inet_select_addr() cannot
select a correct saddr with condition ifa->ifa_scope > scope, because
ifa_scope is RT_SCOPE_HOST and scope is RT_SCOPE_LINK. Then,
inet_select_addr() will go to no_in_dev to lookup all interfaces to find
a primary ip and finally get the primary ip of eth0.

Here I add a localnet_scope defaults to RT_SCOPE_HOST, and when
route_localnet is enabled, this value changes to RT_SCOPE_LINK to make
inet_select_addr() find a correct primary ip as saddr of arp request.

Fixes: d0daebc3d622 ("ipv4: Add interface option to enable routing of 127.0.0.0/8")
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: remove the unnecessary msg->req check from tipc_nl_compat_bearer_set

tipc_nl_compat_bearer_set() is only called by tipc_nl_compat_link_set()
which already does the check for msg->req check, so remove it from
tipc_nl_compat_bearer_set(), and do the same in tipc_nl_compat_media_set().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mlxsw-Thermal-and-hwmon-extensions'

Ido Schimmel says:

====================
mlxsw: Thermal and hwmon extensions

This patchset from Vadim includes various enhancements to thermal and
hwmon code in mlxsw.

Patch #1 adds a thermal zone for each inter-connect device (gearbox).
These devices are present in SN3800 systems and code to expose their
temperature via hwmon was added in commit 2e265a8b6c09 ("mlxsw: core:
Extend hwmon interface with inter-connect temperature attributes").

Currently, there are multiple thermal zones in mlxsw and only a few
cooling devices. Patch #2 detects the hottest thermal zone and the
cooling devices are switched to follow its trends. RFC was sent last
month [1].

Patch #3 allows to read and report negative temperature of the sensors
mlxsw exposes via hwmon and thermal subsystems.

v2 (Andrew Lunn):
* In patch #3, replace '%u' with '%d' in mlxsw_hwmon_module_temp_show()

[1] https://patchwork.ozlabs.org/patch/1107161/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: core: Add support for negative temperature readout

Extend macros MLXSW_REG_MTMP_TEMP_TO_MC() to allow support of negative
temperature readout, since chip and others thermal components are
capable of operating within the negative temperature.
With no such support negative temperature will be consider as very high
temperature and it will cause wrong readout and thermal shutdown.
For negative values 2`s complement is used.
Tested in chamber.
Example of chip ambient temperature readout with chamber temperature:
-10 Celsius:
temp1: -6.0C (highest = -5.0C)
-5 Celsius:
temp1: -1.0C (highest = -1.0C)

v2 (Andrew Lunn):
* Replace '%u' with '%d' in mlxsw_hwmon_module_temp_show()

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: core: Add the hottest thermal zone detection

When multiple sensors are mapped to the same cooling device, the
cooling device should be set according the worst sensor from the
sensors associated with this cooling device.

Provide the hottest thermal zone detection and enforce cooling device
to follow the temperature trends of the hottest zone only.
Prevent competition for the cooling device control from others zones,
by "stable trend" indication. A cooling device will not perform any
actions associated with a zone with a "stable trend".

When other thermal zone is detected as a hottest, a cooling device is
to be switched to following temperature trends of new hottest zone.

Thermal zone score is represented by 32 bits unsigned integer and
calculated according to the next formula:
For T < TZ<t>, where t from {normal trip = 0, high trip = 1, hot
trip = 2, critical = 3}:
TZ score = (T + (TZ<t> - T) / 2) / (TZ<t> - T) * 256 ** j;
Highest thermal zone score s is set as MAX(TZscore);
Following this formula, if TZ is in trip point higher than TZ<k>,
the higher score is to be always assigned to TZ.

For two thermal zones located at the same kind of trip point, the higher
score will be assigned to the zone which is closer to the next trip
point. Thus, the highest score will always be assigned objectively to
the hottest thermal zone.

All the thermal zones initially are to be configured with mode
"enabled" with the "step_wise" governor.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: core: Extend thermal core with per inter-connect device thermal zones

Add a dedicated thermal zone for each inter-connect device. The
current temperature is obtained from inter-connect temperature sensor
and the default trip points are set to the same values as default ASIC
trip points. These settings could be changed from the user space.
A cooling device (fan) is bound to all inter-connect devices.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix missing indentation in source code

Fix misalignment of policy statement in netlink.c due to automatic
spatch code transformation.

Fixes: 3b0f31f2b8c9 ("genetlink: make policy common to family")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: John Rutherford <john.rutherford@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpsw: Fix suspend/resume break

Commit bfe59032bd6127ee190edb30be9381a01765b958 ("net: ethernet:
ti: cpsw: use cpsw as drv data")changes
the driver data to struct cpsw_common *cpsw. This is done
only in probe/remove but the suspend/resume functions are
still left with struct net_device *ndev. Hence fix both
suspend & resume also to fetch the updated driver data.

Fixes: bfe59032bd6127ee1 ("net: ethernet: ti: cpsw: use cpsw as drv data")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hinic: implement the statistical interface of ethtool

This patch implement the statistical interface of ethtool, user can use
ethtool -S to show hinic statistics.

Signed-off-by: Xue Chaojing <xuechaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ipv6-avoid-taking-refcnt-on-dst-during-route-lookup'

Wei Wang says:

====================
ipv6: avoid taking refcnt on dst during route lookup

Ipv6 route lookup code always grabs refcnt on the dst for the caller.
But for certain cases, grabbing refcnt is not always necessary if the
call path is rcu protected and the caller does not cache the dst.
Another issue in the route lookup logic is:
When there are multiple custom rules, we have to do the lookup into
each table associated to each rule individually. And when we can't
find the route in one table, we grab and release refcnt on
net->ipv6.ip6_null_entry before going to the next table.
This operation is completely redundant, and causes false issue because
net->ipv6.ip6_null_entry is a shared object.

This patch set introduces a new flag RT6_LOOKUP_F_DST_NOREF for route
lookup callers to set, to avoid any manipulation on the dst refcnt. And
it converts the major input and output path to use it.

The performance gain is noticable.
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix: 5.50Mpps

v2->v3:
- Handled fib6_rule_lookup() when CONFIG_IPV6_MULTIPLE_TABLES is not
 configured in patch 03 (suggested by David Ahern)
- Removed the renaming of l3mdev_link_scope_lookup() in patch 05
 (suggested by David Ahern)
- Moved definition of ip6_route_output_flags() from an inline function
 in /net/ipv6/route.c to net/ipv6/route.c in order to address kbuild
 error in patch 05

v1->v2:
- Added a helper ip6_rt_put_flags() in patch 3 suggested by David Miller
====================

Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF

For tx path, in most cases, we still have to take refcnt on the dst
cause the caller is caching the dst somewhere. But it still is
beneficial to make use of RT6_LOOKUP_F_DST_NOREF flag while doing the
route lookup. It is cause this flag prevents manipulating refcnt on
net->ipv6.ip6_null_entry when doing fib6_rule_lookup() to traverse each
routing table. The null_entry is a shared object and constant updates on
it cause false sharing.

We converted the current major lookup function ip6_route_output_flags()
to make use of RT6_LOOKUP_F_DST_NOREF.

Together with the change in the rx path, we see noticable performance
boost:
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix: 5.50Mpps

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: convert rx data path to not take refcnt on dst

ip6_route_input() is the key function to do the route lookup in the
rx data path. All the callers to this function are already holding rcu
lock. So it is fairly easy to convert it to not take refcnt on the dst:
We pass in flag RT6_LOOKUP_F_DST_NOREF and do skb_dst_set_noref().
This saves a few atomic inc or dec operations and should boost
performance overall.
This also makes the logic more aligned with v4.

Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: honor RT6_LOOKUP_F_DST_NOREF in rule lookup logic

This patch specifically converts the rule lookup logic to honor this
flag and not release refcnt when traversing each rule and calling
lookup() on each routing table.
Similar to previous patch, we also need some special handling of dst
entries in uncached list because there is always 1 refcnt taken for them
even if RT6_LOOKUP_F_DST_NOREF flag is set.

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: initialize rt6->rt6i_uncached in all pre-allocated dst entries

Initialize rt6->rt6i_uncached on the following pre-allocated dsts:
net->ipv6.ip6_null_entry
net->ipv6.ip6_prohibit_entry
net->ipv6.ip6_blk_hole_entry

This is a preparation patch for later commits to be able to distinguish
dst entries in uncached list by doing:
!list_empty(rt6->rt6i_uncached)

Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: introduce RT6_LOOKUP_F_DST_NOREF flag in ip6_pol_route()

This new flag is to instruct the route lookup function to not take
refcnt on the dst entry. The user which does route lookup with this flag
must properly use rcu protection.
ip6_pol_route() is the major route lookup function for both tx and rx
path.
In this function:
Do not take refcnt on dst if RT6_LOOKUP_F_DST_NOREF flag is set, and
directly return the route entry. The caller should be holding rcu lock
when using this flag, and decide whether to take refcnt or not.

One note on the dst cache in the uncached_list:
As uncached_list does not consume refcnt, one refcnt is always returned
back to the caller even if RT6_LOOKUP_F_DST_NOREF flag is set.
Uncached dst is only possible in the output path. So in such call path,
caller MUST check if the dst is in the uncached_list before assuming
that there is no refcnt taken on the returned dst.

Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

doc: phy: document some PHY_INTERFACE_MODE_xxx settings

There seems to be some confusion surrounding three PHY interface modes,
specifically 1000BASE-X, 2500BASE-X and SGMII. Add some documentation
to phylib detailing precisely what these interface modes refer to.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: fix compilation warnings in fqdir_pre_exit()

The linux-next commit "inet: fix various use-after-free in defrags
units" [1] introduced compilation warnings,

./include/net/inet_frag.h:117:1: warning: 'inline' is not at beginning
of declaration [-Wold-style-declaration]
static void inline fqdir_pre_exit(struct fqdir *fqdir)
^~~~~~
In file included from ./include/net/netns/ipv4.h:10,
 from ./include/net/net_namespace.h:20,
 from ./include/linux/netdevice.h:38,
 from ./include/linux/icmpv6.h:13,
 from ./include/linux/ipv6.h:86,
 from ./include/net/ipv6.h:12,
 from ./include/rdma/ib_verbs.h:51,
 from ./include/linux/mlx5/device.h:37,
 from ./include/linux/mlx5/driver.h:51,
 from
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:37:

[1] https://lore.kernel.org/netdev/20190618180900.88939-3-edumazet@google.com/

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: introduce helpers for handling chip->reg_lock

This is a no-op that simply moves all locking and unlocking of
->reg_lock into trivial helpers. I did that to be able to easily add
some ad hoc instrumentation to those helpers to get some information
on contention and hold times of the mutex. Perhaps others want to do
something similar at some point, so this frees them from doing the
'sed -i' yoga, and have a much smaller 'git diff' while fiddling.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: Fix bug where ring allocation backoff stopped too late

The current code of create_queues_with_size_backoff() allows the ring size
to become as small as ENA_MIN_RING_SIZE/2. This is a bug since we don't
want the queue ring to be smaller than ENA_MIN_RING_SIZE

In this commit we change the loop's termination condition to look at the
queue size of the next iteration instead of that of the current one,
so that the minimal queue size again becomes ENA_MIN_RING_SIZE.

Fixes: eece4d2ab9d2 ("net: ena: add ethtool function for changing io queue sizes")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hinic: fix dereference of pointer hwdev before it is null checked

Currently pointer hwdev is dereferenced when assigning hwif before
hwdev is null checked. Fix this by only derefencing hwdev after the
null check.

Addresses-Coverity: ("Dereference before null check")
Fixes: 4fdc51bb4e92 ("hinic: add support for rss parameters with ethtool")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-mediatek-Add-MT7621-TRGMII-mode-support'

René van Dorst says:

====================
net: mediatek: Add MT7621 TRGMII mode support

Like many other mediatek SOCs, the MT7621 SOC and the internal MT7530
switch both supports TRGMII mode. MT7621 TRGMII speed is fix 1200MBit.

v1->v2:
- Fix breakage on non MT7621 SOC
- Support 25MHz and 40MHz XTAL as MT7530 clocksource
====================

Tested-by: "Frank Wunderlich" <frank-w@public-files.de>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mt7530: Add MT7621 TRGMII mode support

This patch add support TRGMII mode for MT7621 internal MT7530 switch.
MT7621 TRGMII has only one fix speed mode of 1200MBit.

Also adding support for mt7530 25MHz and 40MHz crystal clocksource.
Values are based on Banana Pi R2 bsp [1].

Don't change MT7623 registers on a MT7621 device.

[1] https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/master/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L769

Signed-off-by: René van Dorst <opensource@vdorst.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mediatek: Add MT7621 TRGMII mode support

MT7621 SOC also supports TRGMII.
TRGMII speed is 1200MBit.

Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netns: restore ops before calling ops_exit_list

ops has been iterated to first element when call pre_exit, and
it needs to restore from save_ops, not save ops to save_ops

Fixes: d7d99872c144 ("netns: add pre_exit method to struct pernet_operations")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Error when route does not have any valid nexthops

When user space sends invalid information in RTA_MULTIPATH, the nexthop
list in ip6_route_multipath_add() is empty and 'rt_notif' is set to
NULL.

The code that emits the in-kernel notifications does not check for this
condition, which results in a NULL pointer dereference [1].

Fix this by bailing earlier in the function if the parsed nexthop list
is empty. This is consistent with the corresponding IPv4 code.

v2:
* Check if parsed nexthop list is empty and bail with extack set

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9190 Comm: syz-executor149 Not tainted 5.2.0-rc5+ #38
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:call_fib6_multipath_entry_notifiers+0xd1/0x1a0
net/ipv6/ip6_fib.c:396
Code: 8b b5 30 ff ff ff 48 c7 85 68 ff ff ff 00 00 00 00 48 c7 85 70 ff ff
ff 00 00 00 00 89 45 88 4c 89 e0 48 c1 e8 03 4c 89 65 80 <42> 80 3c 28 00
0f 85 9a 00 00 00 48 b8 00 00 00 00 00 fc ff df 4d
RSP: 0018:ffff88809788f2c0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff11012f11e59 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88809788f390 R08: ffff88809788f8c0 R09: 000000000000000c
R10: ffff88809788f5d8 R11: ffff88809788f527 R12: 0000000000000000
R13: dffffc0000000000 R14: ffff88809788f8c0 R15: ffffffff89541d80
FS: 000055555632c880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 000000009ba7c000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ip6_route_multipath_add+0xc55/0x1490 net/ipv6/route.c:5094
 inet6_rtm_newroute+0xed/0x180 net/ipv6/route.c:5208
 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5219
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:646 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:665
 ___sys_sendmsg+0x803/0x920 net/socket.c:2286
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2324
 __do_sys_sendmsg net/socket.c:2333 [inline]
 __se_sys_sendmsg net/socket.c:2331 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2331
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4401f9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc09fd0028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401f9
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a80
R13: 0000000000401b10 R14: 0000000000000000 R15: 0000000000000000

Reported-by: syzbot+382566d339d52cd1a204@syzkaller.appspotmail.com
Fixes: ebee3cad835f ("ipv6: Add IPv6 multipath notifications for add / replace")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fjes: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fastopen: robustness and endianness fixes for SipHash

Some changes to the TCP fastopen code to make it more robust
against future changes in the choice of key/cookie size, etc.

- Instead of keeping the SipHash key in an untyped u8[] buffer
 and casting it to the right type upon use, use the correct
 type directly. This ensures that the key will appear at the
 correct alignment if we ever change the way these data
 structures are allocated. (Currently, they are only allocated
 via kmalloc so they always appear at the correct alignment)

- Use DIV_ROUND_UP when sizing the u64[] array to hold the
 cookie, so it is always of sufficient size, even if
 TCP_FASTOPEN_COOKIE_MAX is no longer a multiple of 8.

- Drop the 'len' parameter from the tcp_fastopen_reset_cipher()
 function, which is no longer used.

- Add endian swabbing when setting the keys and calculating the hash,
 to ensure that cookie values are the same for a given key and
 source/destination address pair regardless of the endianness of
 the server.

Note that none of these are functional changes wrt the current
state of the code, with the exception of the swabbing, which only
affects big endian systems.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Minor SPDX change conflict.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
    Nault.

2) Don't access the DDM interface unless the transceiver implements it
    in bnx2x, from Mauro S. M. Rodrigues.

3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
    JingYi Hou.

4) Sign extension overflow in lio_core, from Colin Ian King.

5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.

6) Fix epollout hang in hvsock, from Sunil Muthuswamy.

7) Fix regression in default fib6_type, from David Ahern.

8) Handle memory limits in tcp_fragment more appropriately, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
  tcp: refine memory limit test in tcp_fragment()
  inet: clear num_timeout reqsk_alloc()
  net: mvpp2: debugfs: Add pmap to fs dump
  ipv6: Default fib6_type to RTN_UNICAST when not set
  net: hns3: Fix inconsistent indenting
  net/af_iucv: always register net_device notifier
  net/af_iucv: build proper skbs for HiperTransport
  net/af_iucv: remove GFP_DMA restriction for HiperTransport
  net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
  hvsock: fix epollout hang from race condition
  net/udp_gso: Allow TX timestamp with UDP GSO
  net: netem: fix use after free and double free with packet corruption
  net: netem: fix backlog accounting for corrupted GSO frames
  net: lio_core: fix potential sign-extension overflow on large shift
  tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
  ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
  ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
  tun: wake up waitqueues after IFF_UP is set
  net: remove duplicate fetch in sock_getsockopt
  tipc: fix issues with early FAILOVER_MSG from peer
  ...

Merge branch 'PCI-let-pci_disable_link_state-propagate-errors'

Heiner Kallweit says:

====================
PCI: let pci_disable_link_state propagate errors

Drivers like r8169 rely on pci_disable_link_state() having disabled
certain ASPM link states. If OS can't control ASPM then
pci_disable_link_state() turns into a no-op w/o informing the caller.
The driver therefore may falsely assume the respective ASPM link
states are disabled. Let pci_disable_link_state() propagate errors
to the caller, enabling the caller to react accordingly.

I'd propose to let this series go through the netdev tree if the PCI
core extension is acked by the PCI people.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: don't activate ASPM in chip if OS can't control ASPM

Certain chip version / board combinations have massive problems if
ASPM is active. If BIOS enables ASPM and doesn't let OS control it,
then we may have a problem with the current code. Therefore check the
return code of pci_disable_link_state() and don't enable ASPM in the
network chip if OS can't control ASPM.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI: let pci_disable_link_state propagate errors

Drivers may rely on pci_disable_link_state() having disabled certain
ASPM link states. If OS can't control ASPM then pci_disable_link_state()
turns into a no-op w/o informing the caller. The driver therefore may
falsely assume the respective ASPM link states are disabled.
Let pci_disable_link_state() propagate errors to the caller, enabling
the caller to react accordingly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: refine memory limit test in tcp_fragment()

tcp_fragment() might be called for skbs in the write queue.

Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.

Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.

Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Doug Ledford:
"This is probably our last -rc pull request. We don't have anything
  else outstanding at the moment anyway, and with the summer months on
  us and people taking trips, I expect the next weeks leading up to the
  merge window to be pretty calm and sedate.

  This has two simple, no brainer fixes for the EFA driver.

  Then it has ten not quite so simple fixes for the hfi1 driver. The
  problem with them is that they aren't simply one liner typo fixes.
  They're still fixes, but they're more complex issues like livelock
  under heavy load where the answer was to change work queue usage and
  spinlock usage to resolve the problem, or issues with orphaned
  requests during certain types of failures like link down which
  required some more complex work to fix too. They all look like
  legitimate fixes to me, they just aren't small like I wish they were.

  Summary:

   - 2 minor EFA fixes

   - 10 hfi1 fixes related to scaling issues"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/efa: Handle mmap insertions overflow
  RDMA/efa: Fix success return value in case of error
  IB/hfi1: Handle port down properly in pio
  IB/hfi1: Handle wakeup of orphaned QPs for pio
  IB/hfi1: Wakeup QPs orphaned on wait list after flush
  IB/hfi1: Use aborts to trigger RC throttling
  IB/hfi1: Create inline to get extended headers
  IB/hfi1: Silence txreq allocation warnings
  IB/hfi1: Avoid hardlockup with flushlist_lock
  IB/hfi1: Correct tid qp rcd to match verbs context
  IB/hfi1: Close PSM sdma_progress sleep window
  IB/hfi1: Validate fault injection opcode user input

Merge tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull more NFS client fixes from Anna Schumaker:
"These are mostly refcounting issues that people have found recently.
  The revert fixes a suspend recovery performance issue.

   - SUNRPC: Fix a credential refcount leak

   - Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"

   - SUNRPC: Fix xps refcount imbalance on the error path

   - NFS4: Only set creation opendata if O_CREAT"

* tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: Fix a credential refcount leak
  Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
  net :sunrpc :clnt :Fix xps refcount imbalance on the error path
  NFS4: Only set creation opendata if O_CREAT

x86/vdso: Prevent segfaults due to hoisted vclock reads

GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock
pages before the vclock mode checks. This creates a path through
vclock_gettime() in which no vclock is enabled at all (due to disabled
TSC on old CPUs, for example) but the pvclock or hvclock page
nevertheless read. This will segfault on bare metal.

This fixes commit 459e3a21535a ("gcc-9: properly declare the
{pv,hv}clock_page storage") in the sense that, before that commit, GCC
didn't seem to generate the offending code. There was nothing wrong
with that commit per se, and -stable maintainers should backport this to
all supported kernels regardless of whether the offending commit was
present, since the same crash could just as easily be triggered by the
phase of the moon.

On GCC 9.1.1, this doesn't seem to affect the generated code at all, so
I'm not too concerned about performance regressions from this fix.

Cc: stable@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SUNRPC: Fix a credential refcount leak

All callers of __rpc_clone_client() pass in a value for args->cred,
meaning that the credential gets assigned and referenced in
the call to rpc_new_client().

Reported-by: Ido Schimmel <idosch@idosch.org>
Fixes: 79caa5fad47c ("SUNRPC: Cache cred of process creating the rpc_client")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"

Jon Hunter reports:
 "I have been noticing intermittent failures with a system suspend test on
 some of our machines that have a NFS mounted root file-system. Bisecting
 this issue points to your commit 431235818bc3 ("SUNRPC: Declare RPC
 timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does
 appear to resolve the problem.

 The cause of the suspend failure appears to be a long delay observed
 sometimes when resuming from suspend, and this is causing our test to
 timeout."

This reverts commit 431235818bc3a919ca7487500c67c3144feece80.

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

net :sunrpc :clnt :Fix xps refcount imbalance on the error path

rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget
to release it before return, may lead to a memory leak.

Signed-off-by: Lin Yi <teroincn@163.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFS4: Only set creation opendata if O_CREAT

We can end up in nfs4_opendata_alloc during task exit, in which case
current->fs has already been cleaned up. This leads to a crash in
current_umask().

Fix this by only setting creation opendata if we are actually doing an open
with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since
O_CREAT will never be set for the recovery path.

Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fix from Russell King:
"Just one ARM fix this time around for Jason Donenfeld, fixing a
problem with the VDSO generation on big endian"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8867/1: vdso: pass --be8 to linker if necessary

Merge tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Just catching up on the week since back from holidays, everything
  seems quite sane.

  core:
   - copy_to_user fix for really legacy codepaths.

  vmwgfx:
   - two dma fixes
   - one virt hw interaction fix

  i915:
   - modesetting fix
   - gvt fix

  panfrost:
   - BO unmapping fix

  imx:
   - image converter fixes"

* tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: Don't clobber M/N values during fastset check
  drm: return -EFAULT if copy_to_user() fails
  drm/panfrost: Make sure a BO is only unmapped when appropriate
  drm/i915/gvt: ignore unexpected pvinfo write
  gpu: ipu-v3: image-convert: Fix image downsize coefficients
  gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats
  gpu: ipu-v3: image-convert: Fix input bytesperline width/height align
  drm/vmwgfx: fix a warning due to missing dma_parms
  drm/vmwgfx: Honor the sg list segment size limitation
  drm/vmwgfx: Use the backdoor port if the HB port is not available

Merge tag 'staging-5.2-rc6' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO/counter fixes from Greg KH:
"Here are some small driver bugfixes for some staging/iio/counter
  drivers.

  Staging and IIO have been lumped together for a while, as those
  subsystems cross the areas a log, and counter is used by IIO, so
  that's why they are all in one pull request here.

  These are small fixes for reported issues in some iio drivers, the
  erofs filesystem, and a build issue for counter code.

  All have been in linux-next with no reported issues"

* tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: erofs: add requirements field in superblock
  counter/ftm-quaddec: Add missing dependencies in Kconfig
  staging: iio: adt7316: Fix build errors when GPIOLIB is not set
  iio: temperature: mlx90632 Relax the compatibility check
  iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
  staging:iio:ad7150: fix threshold mode config bit

Merge tag 'char-misc-5.2-rc6' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.2-rc6

  Nothing major, just fixes for reported issues:
   - soundwire fixes
   - thunderbolt fixes
   - MAINTAINERS update for fpga maintainer change
   - binder bugfix
   - habanalabs 64bit pointer fix
   - documentation updates

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: use u64_to_user_ptr() for reading user pointers
  doc: fix documentation about UIO_MEM_LOGICAL using
  MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk
  docs: fb: Add TER16x32 to the available font names
  MAINTAINERS: fpga: hand off maintainership to Moritz
  thunderbolt: Implement CIO reset correctly for Titan Ridge
  binder: fix possible UAF when freeing buffer
  thunderbolt: Make sure device runtime resume completes before taking domain lock
  soundwire: intel: set dai min and max channels correctly
  soundwire: stream: fix bad unlock balance
  soundwire: stream: fix out of boundary access on port properties

Merge tag 'usb-5.2-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are four small USB fixes for 5.2-rc6.

  They include two xhci bugfixes, a chipidea fix, and a small dwc2 fix.
  Nothing major, just nice things to get resolved for reported issues.

  All have been in linux-next with no reported issues"

* tag 'usb-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: detect USB 3.2 capable host controllers correctly
  usb: xhci: Don't try to recover an endpoint if port is in error state.
  usb: dwc2: Use generic PHY width in params setup
  usb: chipidea: udc: workaround for endpoint conflict issue

Merge tag 'spdx-5.2-rc6' of git://git./linux/kernel/git/gregkh/spdx

Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6

  Here is what I am guessing is going to be the last "big" SPDX update
  for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
  that were "easy" to determine by pattern matching. The ones after this
  are going to be a bit more difficult and the people on the spdx list
  will be discussing them on a case-by-case basis now.

  Another 5000+ files are fixed up, so our overall totals are:
Files checked:            64545
Files with SPDX:          45529

  Compared to the 5.1 kernel which was:
Files checked:            63848
Files with SPDX:          22576

  This is a huge improvement.

  Also, we deleted another 20000 lines of boilerplate license crud,
  always nice to see in a diffstat"

* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
  ...

Merge tag '5.2-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Four small SMB3 fixes, all for stable"

* tag '5.2-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix GlobalMid_Lock bug in cifs_reconnect
  SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write
  cifs: add spinlock for the openFileList to cifsInodeInfo
  cifs: fix panic in smb2_reconnect

netfilter: nf_tables: add support for matching IPv4 options

This is the kernel change for the overall changes with this description:
Add capability to have rules matching IPv4 options. This is developed
mainly to support dropping of IP packets with loose and/or strict source
route route options.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: synproxy: fix manual bump of the reference counter

This operation is handled by nf_synproxy_ipv4_init() now.

Fixes: d7f9b2f18eae ("netfilter: synproxy: extract SYNPROXY infrastructure from {ipt, ip6t}_SYNPROXY")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: bridge: Fix non-untagged fragment packet

ip netns exec ns1 ip a a dev eth0 10.0.0.7/24
ip netns exec ns2 ip link a link eth0 name vlan type vlan id 200
ip netns exec ns2 ip a a dev vlan 10.0.0.8/24

ip l add dev br0 type bridge vlan_filtering 1
brctl addif br0 veth1
brctl addif br0 veth2

bridge vlan add dev veth1 vid 200 pvid untagged
bridge vlan add dev veth2 vid 200

A two fragment packet sent from ns2 contains the vlan tag 200. In the
bridge conntrack, this packet will defrag to one skb with fraglist.
When the packet is forwarded to ns1 through veth1, the first skb vlan
tag will be cleared by the "untagged" flags. But the vlan tag in the
second skb is still tagged, so the second fragment ends up with tag 200
to ns1. So if the first fragment packet doesn't contain the vlan tag,
all of the remain should not contain vlan tag.

Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: fix nf_conntrack_bridge/ipv6 link error

When CONFIG_IPV6 is disabled, the bridge netfilter code
produces a link error:

ERROR: "br_ip6_fragment" [net/bridge/netfilter/nf_conntrack_bridge.ko] undefined!
ERROR: "nf_ct_frag6_gather" [net/bridge/netfilter/nf_conntrack_bridge.ko] undefined!

The problem is that it assumes that whenever IPV6 is not a loadable
module, we can call the functions direction. This is clearly
not true when IPV6 is disabled.

There are two other functions defined like this in linux/netfilter_ipv6.h,
so change them all the same way.

Fixes: 764dd163ac92 ("netfilter: nf_conntrack_bridge: add support for IPv6")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'imx-drm-fixes-2019-06-20' of git://git.pengutronix.de/git/pza/linux into drm-fixes

drm/imx: ipu-v3 image converter fixes

This series fixes input buffer alignment and downsizer configuration
to adhere to IPU mem2mem CSC/scaler hardware restrictions in certain
downscaling ratios.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1561040798.14349.20.camel@pengutronix.de

Merge tag 'drm-intel-fixes-2019-06-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.2-rc6:
- GVT: Fix reserved PVINFO register write (Weinan)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pnn8sbdp.fsf@intel.com

Merge tag 'drm-misc-fixes-2019-06-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

panfrost- Only unmap BO's if they're mapped (Boris)
core- Handle buffer desc copy_to_user failure properly (Dan)

Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619192745.GA145841@art_vandelay

Merge branch 'vmwgfx-fixes-5.2' of git://people.freedesktop.org/~thomash/linux into drm-fixes

A couple of fixes for vmwgfx. Two fixes for a DMA sg-list debug warning
message. These are not cc'd stable since there is no evidence of actual
breakage.
On fix for the high-bandwidth backdoor port which is cc'd stable due to
upcoming hardware, on which the code would otherwise break.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <VMware> <thomas@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618072255.2720-1-thomas@shipmail.org

ARM: 8867/1: vdso: pass --be8 to linker if necessary

The commit fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC)
to link VDSO") removed the passing of CFLAGS, since ld doesn't take
those directly. However, prior, big-endian ARM was relying on gcc to
translate its -mbe8 option into ld's --be8 option. Lacking this, ld
generated be32 code, making the VDSO generate SIGILL when called by
userspace.

This commit passes --be8 if CONFIG_CPU_ENDIAN_BE8 is enabled.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Merge tag 'ovl-fixes-5.2-rc6' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs fixes from Miklos Szeredi:
"Fix two regressions in this cycle, and a couple of older bugs"

* tag 'ovl-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: make i_ino consistent with st_ino in more cases
  ovl: fix typo in MODULE_PARM_DESC
  ovl: fix bogus -Wmaybe-unitialized warning
  ovl: don't fail with disconnected lower NFS
  ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctls

Merge tag 'fuse-fixes-5.2-rc6' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse fix from Miklos Szeredi:
"Just a single revert, fixing a regression in -rc1"

* tag 'fuse-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
Revert "fuse: require /dev/fuse reads to have enough buffer capacity"

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and x86, plus selftest patches and nicer structs for
  nested state save/restore"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: reorganize initial steps of vmx_set_nested_state
  KVM: arm/arm64: Fix emulated ptimer irq injection
  tests: kvm: Check for a kernel warning
  kvm: tests: Sort tests in the Makefile alphabetically
  KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT
  KVM: x86: Modify struct kvm_nested_state to have explicit fields for data
  KVM: fix typo in documentation
  KVM: nVMX: use correct clean fields when copying from eVMCS
  KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy
  KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST
  KVM: arm64: Implement vq_present() as a macro

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"This is mainly a couple of email address updates to MAINTAINERS, but
 we've also fixed a UAPI build issue with musl libc and an accidental
 double-initialisation of our pgd_cache due to a naming conflict with a
 weak symbol.

 There are a couple of outstanding issues that have been reported, but
 it doesn't look like they're new and we're still a long way off from
 fully debugging them.

 Summary:

 - Fix use of #include in UAPI headers for compatability with musl libc

 - Update email addresses in MAINTAINERS

 - Fix initialisation of pgd_cache due to name collision with weak symbol"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
 arm64/mm: don't initialize pgd_cache twice
 MAINTAINERS: Update my email address
 arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>
 arm64: ssbd: explicitly depend on <linux/prctl.h>
 MAINTAINERS: Update my email address to use @kernel.org

Merge tag 's390-5.2-5' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- Disable address-of-packed-member warning in s390 specific boot code
   to get rid of a gcc9 warning which otherwise is already disabled for
   the whole kernel.

- Fix yet another compiler error seen with CONFIG_OPTIMIZE_INLINING
   enabled.

- Fix memory leak in vfio-ccw code on module exit.

* tag 's390-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  vfio-ccw: Destroy kmem cache region on module exit
  s390/ctl_reg: mark __ctl_set_bit and __ctl_clear_bit as __always_inline
  s390/boot: disable address-of-packed-member warning

Merge tag 'for_v5.2-rc6' of git://git./linux/kernel/git/jack/linux-fs

Pull two misc vfs fixes from Jan Kara:
"One small quota fix fixing spurious EDQUOT errors and one fanotify fix
  fixing a bug in the new fanotify FID reporting code"

* tag 'for_v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: update connector fsid cache on add mark
  quota: fix a problem about transfer quota

Merge tag 'mmc-v5.2-rc4' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"Here's quite a few MMC fixes intended for v5.2-rc6. This time it also
  contains fixes for a WiFi driver, which device is attached to the SDIO
  interface. Patches for the WiFi driver have been acked by the
  corresponding maintainers.

  Summary:

  MMC core:
   - Make switch to eMMC HS400 more robust for some controllers
   - Add two SDIO func API to manage re-tuning constraints
   - Prevent processing SDIO IRQs when the card is suspended

  MMC host:
   - sdhi: Disallow broken HS400 for M3-W ES1.2, RZ/G2M and V3H
   - mtk-sd: Fixup support for SDIO IRQs
   - sdhci-pci-o2micro: Fixup support for tuning

  Wireless BRCMFMAC (SDIO):
   - Deal with expected transmission errors related to the idle states
     (handled by the Always-On-Subsystem or AOS) on the SDIO-based WiFi
     on rk3288-veyron-minnie, rk3288-veyron-speedy and
     rk3288-veyron-mickey"

* tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Prevent processing SDIO IRQs when the card is suspended
  mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
  brcmfmac: sdio: Don't tune while the card is off
  mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
  brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  mmc: core: API to temporarily disable retuning for SDIO CRC errors
  Revert "brcmfmac: disable command decode in sdio_aos"
  mmc: mediatek: fix SDIO IRQ detection issue
  mmc: mediatek: fix SDIO IRQ interrupt handle flow
  mmc: core: complete HS400 before checking status
  mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H

Merge tag 'for-linus-20190620' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Three fixes that should go into this series.

  One is a set of two patches from Christoph, fixing a page leak on same
  page merges. Boiled down version of a bigger fix, but this one is more
  appropriate for this late in the cycle (and easier to backport to
  stable).

  The last patch is for a divide error in MD, from Mariusz (via Song)"

* tag 'for-linus-20190620' of git://git.kernel.dk/linux-block:
  md: fix for divide error in status_resync
  block: fix page leak when merging to same page
  block: return from __bio_try_merge_page if merging occured in the same page

Merge tag 'kvmarm-fixes-for-5.2-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm fixes for 5.2, take #2

- SVE cleanup killing a warning with ancient GCC versions
- Don't report non-existent system registers to userspace
- Fix memory leak when freeing the vgic ITS
- Properly lower the interrupt on the emulated physical timer

KVM: nVMX: reorganize initial steps of vmx_set_nested_state

Commit 332d079735f5 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS
state before setting new state", 2019-05-02) broke evmcs_test because the
eVMCS setup must be performed even if there is no VMXON region defined,
as long as the eVMCS bit is set in the assist page.

While the simplest possible fix would be to add a check on
kvm_state->flags & KVM_STATE_NESTED_EVMCS in the initial "if" that
covers kvm_state->hdr.vmx.vmxon_pa == -1ull, that is quite ugly.

Instead, this patch moves checks earlier in the function and
conditionalizes them on kvm_state->hdr.vmx.vmxon_pa, so that
vmx_set_nested_state always goes through vmx_leave_nested
and nested_enable_evmcs.

Fixes: 332d079735f5 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state")
Cc: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'misc-habanalabs-fixes-2019-06-20' of git://people.freedesktop.org/~gabbayo/linux into char-misc-linus

Oded writes:

This tag contains the following fix:

- Casting warning of a 64-bit integer in 32-bit architecture. Use the
macro that was defined for this purpose.

* tag 'misc-habanalabs-fixes-2019-06-20' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: use u64_to_user_ptr() for reading user pointers

netfilter: bridge: prevent UAF in brnf_exit_net()

Prevent a UAF in brnf_exit_net().

When unregister_net_sysctl_table() is called the ctl_hdr pointer will
obviously be freed and so accessing it righter after is invalid. Fix
this by stashing a pointer to the table we want to free before we
unregister the sysctl header.

Note that syzkaller falsely chased this down to the drm tree so the
Fixes tag that syzkaller requested would be wrong. This commit uses a
different but the correct Fixes tag.

/* Splat */

BUG: KASAN: use-after-free in br_netfilter_sysctl_exit_net
net/bridge/br_netfilter_hooks.c:1121 [inline]
BUG: KASAN: use-after-free in brnf_exit_net+0x38c/0x3a0
net/bridge/br_netfilter_hooks.c:1141
Read of size 8 at addr ffff8880a4078d60 by task kworker/u4:4/8749

CPU: 0 PID: 8749 Comm: kworker/u4:4 Not tainted 5.2.0-rc5-next-20190618 #17
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
Workqueue: netns cleanup_net
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0xd4/0x306 mm/kasan/report.c:351
__kasan_report.cold+0x1b/0x36 mm/kasan/report.c:482
kasan_report+0x12/0x20 mm/kasan/common.c:614
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
br_netfilter_sysctl_exit_net net/bridge/br_netfilter_hooks.c:1121 [inline]
brnf_exit_net+0x38c/0x3a0 net/bridge/br_netfilter_hooks.c:1141
ops_exit_list.isra.0+0xaa/0x150 net/core/net_namespace.c:154
cleanup_net+0x3fb/0x960 net/core/net_namespace.c:553
process_one_work+0x989/0x1790 kernel/workqueue.c:2269
worker_thread+0x98/0xe40 kernel/workqueue.c:2415
kthread+0x354/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Allocated by task 11374:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_kmalloc mm/kasan/common.c:489 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
__do_kmalloc mm/slab.c:3645 [inline]
__kmalloc+0x15c/0x740 mm/slab.c:3654
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:743 [inline]
__register_sysctl_table+0xc7/0xef0 fs/proc/proc_sysctl.c:1327
register_net_sysctl+0x29/0x30 net/sysctl_net.c:121
br_netfilter_sysctl_init_net net/bridge/br_netfilter_hooks.c:1105 [inline]
brnf_init_net+0x379/0x6a0 net/bridge/br_netfilter_hooks.c:1126
ops_init+0xb3/0x410 net/core/net_namespace.c:130
setup_net+0x2d3/0x740 net/core/net_namespace.c:316
copy_net_ns+0x1df/0x340 net/core/net_namespace.c:439
create_new_namespaces+0x400/0x7b0 kernel/nsproxy.c:103
unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:202
ksys_unshare+0x444/0x980 kernel/fork.c:2822
__do_sys_unshare kernel/fork.c:2890 [inline]
__se_sys_unshare kernel/fork.c:2888 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:2888
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
__cache_free mm/slab.c:3417 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3746
__rcu_reclaim kernel/rcu/rcu.h:215 [inline]
rcu_do_batch kernel/rcu/tree.c:2092 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2310 [inline]
rcu_core+0xcc7/0x1500 kernel/rcu/tree.c:2291
__do_softirq+0x25c/0x94c kernel/softirq.c:292

The buggy address belongs to the object at ffff8880a4078d40
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 32 bytes inside of
512-byte region [ffff8880a4078d40, ffff8880a4078f40)
The buggy address belongs to the page:
page:ffffea0002901e00 refcount:1 mapcount:0 mapping:ffff8880aa400a80
index:0xffff8880a40785c0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea0001d636c8 ffffea0001b07308 ffff8880aa400a80
raw: ffff8880a40785c0 ffff8880a40780c0 0000000100000004 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8880a4078c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4078c80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
> ffff8880a4078d00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^
ffff8880a4078d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4078e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Reported-by: syzbot+43a3fa52c0d9c5c94f41@syzkaller.appspotmail.com
Fixes: 22567590b2e6 ("netfilter: bridge: namespace bridge netfilter sysctls")
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: synproxy: use nf_cookie_v6_check() from core

This helper function is never used and it is intended to avoid a direct
dependency with the ipv6 module.

Fixes: d7f9b2f18eae ("netfilter: synproxy: extract SYNPROXY infrastructure from {ipt, ip6t}_SYNPROXY")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: synproxy: fix building syncookie calls

When either CONFIG_IPV6 or CONFIG_SYN_COOKIES are disabled, the kernel
fails to build:

include/linux/netfilter_ipv6.h:180:9: error: implicit declaration of function '__cookie_v6_init_sequence'
 [-Werror,-Wimplicit-function-declaration]
 return __cookie_v6_init_sequence(iph, th, mssp);
include/linux/netfilter_ipv6.h:194:9: error: implicit declaration of function '__cookie_v6_check'
 [-Werror,-Wimplicit-function-declaration]
 return __cookie_v6_check(iph, th, cookie);
net/ipv6/netfilter.c:237:26: error: use of undeclared identifier '__cookie_v6_init_sequence'; did you mean 'cookie_init_sequence'?
net/ipv6/netfilter.c:238:21: error: use of undeclared identifier '__cookie_v6_check'; did you mean '__cookie_v4_check'?

Fix the IS_ENABLED() checks to match the function declaration
and definitions for these.

Fixes: 3006a5224f15 ("netfilter: synproxy: remove module dependency on IPv6 SYNPROXY")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'fixes-for-v5.2-rc5' of git://git./linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v5.2-rc5

A single fix to take into account the PHY width during initialization of
dwc2 driver. This change allows deviceTree to pass PHY width if
necessary.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* tag 'fixes-for-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: dwc2: Use generic PHY width in params setup

habanalabs: use u64_to_user_ptr() for reading user pointers

We cannot cast a 64-bit integer to a pointer on 32-bit architectures
without a warning:

drivers/misc/habanalabs/habanalabs_ioctl.c: In function 'debug_coresight':
drivers/misc/habanalabs/habanalabs_ioctl.c:143:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
input = memdup_user((const void __user *) args->input_ptr,

Use the macro that was defined for this purpose.

Fixes: 315bc055ed56 ("habanalabs: add new IOCTL for debug, tracing and profiling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>