git.openwrt.org Git - openwrt/staging/blogic.git/log

USB: host: sl811: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Show what USB release number the xHC supports from protocol capablity

xhci driver displays the supported xHC USB revision in a message during
driver load:

"Host supports USB 3.1 Enhanced SuperSpeed"

Get the USB minor revision number from the xhci protocol capability.
This will show the correct supported revisions for new USB 3.2 and later
hosts

Don't rely on the SBRN (serial bus revision number) register, it's often
showing 0x30 (USB3.0) for hosts that support USB 3.1

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Clear the host side toggle manually when endpoint is soft reset

Some devices use a clear endpoint halt request as a soft reset, even if
the endpoint is not halted. This will clear the toggle and sequence on the
device side.

xHCI however refuses to reset a non-halted endpoint, so instead
we need to issue a configure endpoint command on xHCI to clear its host
side toggle and sequence, and get it in sync with the device side.

This is a respin of a old patch that was reverted as it had a stale
endpoint context dequeue value which caused regression.
commit 27082e2654dc ("xhci: Clear the host side toggle manually when
endpoint is 'soft reset'")

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: refactor xhci_urb_enqueue a bit with minor changes

make the local ep_state variable a pointer to the actual ring ep_state.
This allows us to read fresh ep_state values every time, will be useful
later.

Also move the streams check out from bulk only case. Even if only
bulk tranfers can use streams we shouldn't continue if those flags
are set. Main reason for this change is really code readability and
grouping functionality

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Don't always run the default stop endpoint command completion handler

The default stop endpoint completion handler will give back cancelled
URBs, and clean, or move past those canceller TRBs on the ring.

This is not always the preferred action.

If the stop endpoint command issuer is waiting for a completion
skip the default handler and just call the completion.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: zero usb device slot_id member when disabling and freeing a xhci slot

set udev->slot_id to zero when disabling and freeing the xhci slot.
Prevents usb core from calling xhci with a stale slot id.

xHC controller may be reset during resume to recover from some error.
All slots are unusable as they are disabled and freed.
xhci driver starts slot enumeration again from 1 in the order they are
enabled. In the worst case a stale udev->slot_id for one device matches
a newly enabled slot_id for a different device, causing us to
perform a action on the wrong device.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Remove ep_trb from finish_td()

Function argument ep_trb for finish_td() isn't needed anymore.
Cleanup it.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Remove ep_trb from xhci_cleanup_halted_endpoint()

Function argument ep_trb for xhci_cleanup_halted_endpoint() isn't
needed anymore. Cleanup it.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Clean up error code in xhci_dbc_tty_register_device()

tty_port_register_device() returns error pointers on error, never NULL.
The IS_ERR_OR_NULL() function returns either 1 or 0 so it means we
return 1 on error instead of a proper error code. The caller only
checks for zero vs non-zero so this doesn't affect runtime.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: core: Add "quirks" parameter for usbcore"

This reverts commit b27560e4d9e5240b5544c9c5650c7442e482646e as it
breaks the build for some arches :(

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1d1d53f85ddd..70a7398c20e2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4368,6 +4368,61 @@

usbcore.nousb [USB] Disable the USB subsystem

+ usbcore.quirks=
+ [USB] A list of quirks entries to supplement or
+ override the built-in usb core quirk list.  List
+ entries are separated by commas.  Each entry has
+ the form VID:PID:Flags where VID and PID are Vendor
+ and Product ID values (4-digit hex numbers) and
+ Flags is a set of characters, each corresponding
+ to a common usb core quirk flag as follows:
+ a = USB_QUIRK_STRING_FETCH_255 (string
+ descriptors must not be fetched using
+ a 255-byte read);
+ b = USB_QUIRK_RESET_RESUME (device can't resume
+ correctly so reset it instead);
+ c = USB_QUIRK_NO_SET_INTF (device can't handle
+ Set-Interface requests);
+ d = USB_QUIRK_CONFIG_INTF_STRINGS (device can't
+ handle its Configuration or Interface
+ strings);
+ e = USB_QUIRK_RESET (device can't be reset
+ (e.g morph devices), don't use reset);
+ f = USB_QUIRK_HONOR_BNUMINTERFACES (device has
+ more interface descriptions than the
+ bNumInterfaces count, and can't handle
+ talking to these interfaces);
+ g = USB_QUIRK_DELAY_INIT (device needs a pause
+ during initialization, after we read
+ the device descriptor);
+ h = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL (For
+ high speed and super speed interrupt
+ endpoints, the USB 2.0 and USB 3.0 spec
+ require the interval in microframes (1
+ microframe = 125 microseconds) to be
+ calculated as interval = 2 ^
+ (bInterval-1).
+ Devices with this quirk report their
+ bInterval as the result of this
+ calculation instead of the exponent
+ variable used in the calculation);
+ i = USB_QUIRK_DEVICE_QUALIFIER (device can't
+ handle device_qualifier descriptor
+ requests);
+ j = USB_QUIRK_IGNORE_REMOTE_WAKEUP (device
+ generates spurious wakeup, ignore
+ remote wakeup capability);
+ k = USB_QUIRK_NO_LPM (device can't handle Link
+ Power Management);
+ l = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL
+ (Device reports its bInterval as linear
+ frames instead of the USB 2.0
+ calculation);
+ m = USB_QUIRK_DISCONNECT_SUSPEND (Device needs
+ to be disconnected before suspend to
+ prevent spurious wakeup)
+ Example: quirks=0781:5580:bk,0a5c:5834:gij
+
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f4a548471f0f..42faaeead81b 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -11,6 +11,143 @@
#include <linux/usb/hcd.h>
#include "usb.h"

+struct quirk_entry {
+ u16 vid;
+ u16 pid;
+ u32 flags;
+};
+
+static DEFINE_MUTEX(quirk_mutex);
+
+static struct quirk_entry *quirk_list;
+static unsigned int quirk_count;
+
+static char quirks_param[128];
+
+static int quirks_param_set(const char *val, const struct kernel_param *kp)
+{
+ char *p, *field;
+ u16 vid, pid;
+ u32 flags;
+ size_t i;
+
+ mutex_lock(&quirk_mutex);
+
+ if (!val || !*val) {
+ quirk_count = 0;
+ kfree(quirk_list);
+ quirk_list = NULL;
+ goto unlock;
+ }
+
+ for (quirk_count = 1, i = 0; val[i]; i++)
+ if (val[i] == ',')
+ quirk_count++;
+
+ if (quirk_list) {
+ kfree(quirk_list);
+ quirk_list = NULL;
+ }
+
+ quirk_list = kcalloc(quirk_count, sizeof(struct quirk_entry),
+      GFP_KERNEL);
+ if (!quirk_list) {
+ mutex_unlock(&quirk_mutex);
+ return -ENOMEM;
+ }
+
+ for (i = 0, p = (char *)val; p && *p;) {
+ /* Each entry consists of VID:PID:flags */
+ field = strsep(&p, ":");
+ if (!field)
+ break;
+
+ if (kstrtou16(field, 16, &vid))
+ break;
+
+ field = strsep(&p, ":");
+ if (!field)
+ break;
+
+ if (kstrtou16(field, 16, &pid))
+ break;
+
+ field = strsep(&p, ",");
+ if (!field || !*field)
+ break;
+
+ /* Collect the flags */
+ for (flags = 0; *field; field++) {
+ switch (*field) {
+ case 'a':
+ flags |= USB_QUIRK_STRING_FETCH_255;
+ break;
+ case 'b':
+ flags |= USB_QUIRK_RESET_RESUME;
+ break;
+ case 'c':
+ flags |= USB_QUIRK_NO_SET_INTF;
+ break;
+ case 'd':
+ flags |= USB_QUIRK_CONFIG_INTF_STRINGS;
+ break;
+ case 'e':
+ flags |= USB_QUIRK_RESET;
+ break;
+ case 'f':
+ flags |= USB_QUIRK_HONOR_BNUMINTERFACES;
+ break;
+ case 'g':
+ flags |= USB_QUIRK_DELAY_INIT;
+ break;
+ case 'h':
+ flags |= USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL;
+ break;
+ case 'i':
+ flags |= USB_QUIRK_DEVICE_QUALIFIER;
+ break;
+ case 'j':
+ flags |= USB_QUIRK_IGNORE_REMOTE_WAKEUP;
+ break;
+ case 'k':
+ flags |= USB_QUIRK_NO_LPM;
+ break;
+ case 'l':
+ flags |= USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL;
+ break;
+ case 'm':
+ flags |= USB_QUIRK_DISCONNECT_SUSPEND;
+ break;
+ /* Ignore unrecognized flag characters */
+ }
+ }
+
+ quirk_list[i++] = (struct quirk_entry)
+ { .vid = vid, .pid = pid, .flags = flags };
+ }
+
+ if (i < quirk_count)
+ quirk_count = i;
+
+unlock:
+ mutex_unlock(&quirk_mutex);
+
+ return param_set_copystring(val, kp);
+}
+
+static const struct kernel_param_ops quirks_param_ops = {
+ .set = quirks_param_set,
+ .get = param_get_string,
+};
+
+static struct kparam_string quirks_param_string = {
+ .maxlen = sizeof(quirks_param),
+ .string = quirks_param,
+};
+
+module_param_cb(quirks, &quirks_param_ops, &quirks_param_string, 0644);
+MODULE_PARM_DESC(quirks, "Add/modify USB quirks by specifying quirks=vendorID:productID:quirks");
+
/* Lists of quirky USB devices, split in device quirks and interface quirks.
  * Device quirks are applied at the very beginning of the enumeration process,
  * right after reading the device descriptor. They can thus only match on device
@@ -320,8 +457,8 @@ static int usb_amd_resume_quirk(struct usb_device *udev)
return 0;
}

-static u32 __usb_detect_quirks(struct usb_device *udev,
-        const struct usb_device_id *id)
+static u32 usb_detect_static_quirks(struct usb_device *udev,
+     const struct usb_device_id *id)
{
u32 quirks = 0;

@@ -339,21 +476,43 @@ static u32 __usb_detect_quirks(struct usb_device *udev,
return quirks;
}

+static u32 usb_detect_dynamic_quirks(struct usb_device *udev)
+{
+ u16 vid = le16_to_cpu(udev->descriptor.idVendor);
+ u16 pid = le16_to_cpu(udev->descriptor.idProduct);
+ int i, flags = 0;
+
+ mutex_lock(&quirk_mutex);
+
+ for (i = 0; i < quirk_count; i++) {
+ if (vid == quirk_list[i].vid && pid == quirk_list[i].pid) {
+ flags = quirk_list[i].flags;
+ break;
+ }
+ }
+
+ mutex_unlock(&quirk_mutex);
+
+ return flags;
+}
+
/*
  * Detect any quirks the device has, and do any housekeeping for it if needed.
  */
void usb_detect_quirks(struct usb_device *udev)
{
- udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
+ udev->quirks = usb_detect_static_quirks(udev, usb_quirk_list);

/*
* Pixart-based mice would trigger remote wakeup issue on AMD
* Yangtze chipset, so set them as RESET_RESUME flag.
*/
if (usb_amd_resume_quirk(udev))
- udev->quirks |= __usb_detect_quirks(udev,
+ udev->quirks |= usb_detect_static_quirks(udev,
usb_amd_resume_quirk_list);

+ udev->quirks ^= usb_detect_dynamic_quirks(udev);
+
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
udev->quirks);
@@ -372,7 +531,7 @@ void usb_detect_interface_quirks(struct usb_device *udev)
{
u32 quirks;

- quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
+ quirks = usb_detect_static_quirks(udev, usb_interface_quirk_list);
if (quirks == 0)
return;

@@ -380,3 +539,11 @@ void usb_detect_interface_quirks(struct usb_device *udev)
quirks);
udev->quirks |= quirks;
}
+
+void usb_release_quirk_list(void)
+{
+ mutex_lock(&quirk_mutex);
+ kfree(quirk_list);
+ quirk_list = NULL;
+ mutex_unlock(&quirk_mutex);
+}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 2f5fbc56a9dd..0adb6345ff2e 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1259,6 +1259,7 @@ static void __exit usb_exit(void)
if (usb_disabled())
return;

+ usb_release_quirk_list();
usb_deregister_device_driver(&usb_generic_driver);
usb_major_cleanup();
usb_deregister(&usbfs_driver);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 149cc7480971..546a2219454b 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -36,6 +36,7 @@ extern void usb_deauthorize_interface(struct usb_interface *);
extern void usb_authorize_interface(struct usb_interface *);
extern void usb_detect_quirks(struct usb_device *udev);
extern void usb_detect_interface_quirks(struct usb_device *udev);
+extern void usb_release_quirk_list(void);
extern int usb_remove_device(struct usb_device *udev);

extern int usb_get_device_descriptor(struct usb_device *dev,

staging: typec: modify parameter of tcpci_irq

The parameter, dev_id, of tcpci_irq should be tcpci_chip.
Remove definition of TCPC_CC_STATUS_DRPRST in tcpci.h.

Fixes: 8f9439022648("staging: typec: handle vendor defined part and modify drp toggling flow")
Signed-off-by: ShuFan Lee <shufan_lee@richtek.com>
Reviewed-by: Li Jun <jun.li@nxp.com>
Tested-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: typec: handle vendor defined part and modify drp toggling flow

Handle vendor defined behavior in tcpci_init, tcpci_set_vconn, tcpci_start_drp_toggling
and export tcpci_irq. More operations can be extended in tcpci_data if needed.
According to TCPCI specification, 4.4.5.2 ROLE_CONTROL,
TCPC shall not start DRP toggling until subsequently the TCPM
writes to the COMMAND register to start DRP toggling.
DRP toggling flow is changed as following:
- Write DRP = 1, Rp level and RC.CCx to Rd/Rd or Rp/Rp
- Set LOOK4CONNECTION command

Signed-off-by: ShuFan Lee <shufan_lee@richtek.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: Add "quirks" parameter for usbcore

Trying quirks in usbcore needs to rebuild the driver or the entire
kernel if it's builtin. It can save a lot of time if usbcore has similar
ability like "usbhid.quirks=" and "usb-storage.quirks=".

Rename the original quirk detection function to "static" as we introduce
this new "dynamic" function.

Now users can use "usbcore.quirks=" as short term workaround before the
next kernel release. Also, the quirk parameter can XOR the builtin
quirks for debugging purpose.

This is inspired by usbhid and usb-storage.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: Start using ERR_PTR

In order to allow the USB Type-C Class driver take care of
things like muxes and other possible dependencies for the
port drivers, returning ERR_PTR instead of NULL from the
registration functions in case of failure.

The reason for taking over control of the muxes for example
is because handling them in the port drivers would be just
boilerplate.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hcd: remove support for initializing a single PHY

With the new PHY wrapper in place we can now handle multiple PHYs.
Remove the code which handles only one generic PHY as this is now
covered (with support for multiple PHYs as well as suspend/resume
support) by the new PHY wrapper.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci-platform: remove custom USB PHY handling

The new PHY wrapper is now wired up in the core HCD code. This means
that PHYs are now controlled (initialized, enabled, disabled, exited)
without requiring any host-driver specific code.
Remove the custom USB PHY handling from the ohci-platform driver as the
core HCD code now handles this.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ehci-platform: remove custom USB PHY handling

The new PHY wrapper is now wired up in the core HCD code. This means
that PHYs are now controlled (initialized, enabled, disabled, exited)
without requiring any host-driver specific code.
Remove the custom USB PHY handling from the ehci-platform driver as the
core HCD code now handles this.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-mtk: remove custom USB PHY handling

The new PHY wrapper is now wired up in the core HCD code. This means
that PHYs are now controlled (initialized, enabled, disabled, exited)
without requiring any host-driver specific code.
Remove the custom USB PHY handling from the xhci-mtk driver as the core
HCD code now handles this.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hcd: integrate the PHY wrapper into the HCD core

This integrates the PHY wrapper into the core hcd infrastructure.
Multiple PHYs which are part of the HCD's device tree node are now
managed (= powered on/off when needed), by the new usb_phy_roothub code.

Suspend and resume is also supported, however not for
runtime/auto-suspend (which is triggered for example when no devices are
connected to the USB bus). This is needed on some SoCs (for example
Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend
then devices which are plugged in afterwards are not seen by the host.

One example where this is required is the Amlogic GXL and GXM SoCs:
They are using a dwc3 USB controller with up to three ports enabled on
the internal roothub. Each port has it's own PHY which must be enabled
(if one of the PHYs is left disabled then none of the USB ports works at
all).
The new logic works on the Amlogic GXL and GXM SoCs because the dwc3
driver internally creates a xhci-hcd which then registers a HCD which
then triggers our new PHY wrapper.

USB controller drivers can opt out of this by setting
"skip_phy_initialization" in struct usb_hcd to true. This is identical
to how it works for a single USB PHY, so the "multiple PHY" handling is
disabled for drivers that opted out of the management logic of a single
PHY.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: add a wrapper for the USB PHYs on the HCD

Many SoC platforms have separate devices for the USB PHY which are
registered through the generic PHY framework. These PHYs have to be
enabled to make the USB controller actually work. They also have to be
disabled again on shutdown/suspend.

Currently (at least) the following HCI platform drivers are using custom
code to obtain all PHYs via devicetree for the roothub/controller and
disable/enable them when required:
- ehci-platform.c has ehci_platform_power_{on,off}
- xhci-mtk.c has xhci_mtk_phy_{init,exit,power_on,power_off}
- ohci-platform.c has ohci_platform_power_{on,off}

With this new wrapper the USB PHYs can be specified directly in the
USB controller's devicetree node (just like on the drivers listed
above). This allows SoCs like the Amlogic Meson GXL family to operate
correctly once this is wired up correctly. These SoCs use a dwc3
controller and require all USB PHYs to be initialized (if one of the USB
PHYs it not initialized then none of USB port works at all).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: add a flag to skip PHY initialization to struct usb_hcd

The USB HCD core driver parses the device-tree node for "phys" and
"usb-phys" properties. It also manages the power state of these PHYs
automatically.
However, drivers may opt-out of this behavior by setting "phy" or
"usb_phy" in struct usb_hcd to a non-null value. An example where this
is required is the "Qualcomm USB2 controller", implemented by the
chipidea driver. The hardware requires that the PHY is only powered on
after the "reset completed" event from the controller is received.

A follow-up patch will allow the USB HCD core driver to manage more than
one PHY. Add a new "skip_phy_initialization" bitflag to struct usb_hcd
so drivers can opt-out of any PHY management provided by the USB HCD
core driver.

This also updates the existing drivers so they use the new flag if they
want to opt out of the PHY management provided by the USB HCD core
driver. This means that for these drivers the new "multiple PHY"
handling (which will be added in a follow-up patch) will be disabled as
well.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: usb: add the documentation for USB HCDs

A USB HCD may have several PHYs which need to be configured before the
the HCD starts working.
This adds the documentation for such a USB HCD as well as a reference to
the new "usb-hcd.txt" from all bindings that implement a USB HCD which
support one USB PHY per port.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: isp1760: Use kasprintf

Use kasprintf instead of combination of kmalloc and sprintf and
therefore avoid unnecessary computation of string length.
Also, remove the useless local variable.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: clarify ACPI spec version and section number for _UPC & _PLD

ACPI spec inserts sections for new features frequently and section
numbers are changed. It is easy to refer to ACPI spec if ACPI version
is available in comments.

There are no functional changes.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Don't disable Latency tolerance Messaging (LTM) before port reset

Disabing Latency Tolerance Messaging before port reset is unnecessary.
LTM is automatically disabled at port reset.

If host can't communicate with the device the LTM message will fail, and
the hub driver will unnecessarily do a logical disconnect.
Broken communication is ofter the reason for a reset in the first place.

Additionally we can't guarantee device is in a configured state,
epecially in reset-resume case when root hub lost power.
LTM can't be modified unless device is in a configured state.

Just remove LTM disabling before port reset.

Details about LTM and port reset in USB 3 specification:

USB 3 spec section 9.4.5
"The LTM Enable field can be modified by the SetFeature() and
ClearFeature() requests using the LTM_ENABLE feature selector.
This field is reset to zero when the device is reset."

USB 3 spec section 9.4.1
"The device shall process a Clear Feature (U1_Enable or U2_Enable or
LTM_Enable) only if the device is in the configured state."

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: adutux: Add waiting in transfer abortion

Add waiting for an URB transmit finish that let the last URB to be sent
(to be not discarded) during 'release' procedure. W/o this waiting,the
last frame will be nearly always lost.

A test case: an attempt of sending a single frame:
echo -en "\001mk255" >/dev/adutux0

Signed-off-by: Kirill Kapranov <kirill.kirillovich.kapranov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uwb: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: typec: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: host: whci: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: host: isp116x: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Cc: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: host: imx21: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: host: fhci: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: pxa27x: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: pxa25x: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: gr: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: bcm63xx: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: musb: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dwc2: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Cc: John Youn <johnyoun@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: chipidea: Re-use DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

typec: tcpm: Add SDB header for Status message handling

This commit adds a header providing definitions for handling
Status messages. Currently the header only focuses on handling
incoming Status messages.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

typec: tcpm: Add ADO header for Alert message handling

This commit adds a header providing definitions for handling Alert
messages. Currently the header only focuses on handling incoming
alerts.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

typec: tcpm: Add PD Rev 3.0 definitions to PD header

This commit adds definitions for PD Rev 3.0 messages, including
APDO PPS and extended message support for TCPM.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: tools: change to use new error codes in server reply messages

Changed usbip_network, usbip_attach, usbip_list, and usbipd to use
and propagate the new error codes in server reply messages.

usbip_net_recv_op_common() is changed to take a pointer to status
return the status returned in the op_common.status to callers.

usbip_attach and usbip_list use the common interface to print error
messages to indicate why the request failed.

With this change the messages say why a request failed:

- when a client requests a device that is already exported:

usbip attach -r server_name -b 3-10.2
usbip: error: Attach Request for 3-10.2 failed - Device busy (exported)

- when a client requests a device that isn't exportable,

usbip attach -r server_name -b 3-10.4
usbip: error: Attach Request for 3-10.4 failed - Device not found

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: usbip_host_common: Use new error codes to return request status

Currently ST_OK and ST_NA are the only values used to communicate
status of a request from a client. Use new error codes to clearly
indicate what failed. For example, when client sends request to
import a device that isn't export-able, send ST_DEV_BUSY to the client.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: tools: add more error codes for usbip request/reply messages

Currently ST_OK and ST_NA are the only values defined to communicate
status of a request from a client. Add more error codes to clearly
indicate what failed. For example, when client sends request to import
a device that isn't export-able, server can send a specific error code
to the client.

Existing defines are moved to a common header in libsrc to be included
in the libusbip_la-usbip_common.o to be used by all the usbip tools.
Supporting interface to print error strings is added to the common lib.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: tools usbip_network: Fix cryptic error messages

Kernel and tool version mismatch message is cryptic. Fix it to be
informative.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: tools usbip_attach: Fix cryptic error messages

Attach device error message is cryptic and useless. Fix it to be
informative.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: wusbcore: remove redundant re-assignment to pointer 'dev'

Pointer dev is initialized and then re-assigned with the same value
a little later, hence the second assignment is redundant and can be
removed.

Cleans up clang warning:
drivers/usb/wusbcore/wa-nep.c:88:17: warning: Value stored to 'dev'
during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS

Now that usbip supports USB3, the maximum number of ports allowed
on a hub is 15 (USB_SS_MAXPORTS), not 31 (USB_MAXCHILDREN).

Reported-by: Gianluigi Tiesi <sherpya@netfarm.it>
Reported-by: Borissh1983 <borissh1983@gmail.com>
References: https://bugs.debian.org/878866
Fixes: 1c9de5bf4286 ("usbip: vhci-hcd: Add USB3 SuperSpeed support")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usbtest: Remove stack VLA usage

The kernel would like to have all stack VLA usage removed[1]. We
already have a pre-processor constant defined MAX_SGLEN. We can use
this instead of the variable param-sglen.

[1]: https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: adutux: Delete a misleading comment

Delete a misleading comment to an obvious definition.

Signed-off-by: Kirill Kapranov <kirill.kirillovich.kapranov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usb-skeleton: make MODULE_LICENSE and SPDX tag match

GPL v2 is the original license according to the old license text.
See f64cdd0e94f1faf3b7f2b03af71f70dc6d8da0c2.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 4.16-rc3 into usb-next

We want the USB fixes in here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.16-rc3

Merge tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa fixes from Max Filippov:
"Two fixes for reserved memory/DMA buffers allocation in high memory on
  xtensa architecture

   - fix memory accounting when reserved memory is in high memory region

   - fix DMA allocation from high memory"

* tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: support DMA buffers in high memory
  xtensa: fix high memory/reserved memory collision

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"A small set of fixes:

   - UAPI data type correction for hyperv

   - correct the cpu cores field in /proc/cpuinfo on CPU hotplug

   - return proper error code in the resctrl file system failure path to
     avoid silent subsequent failures

   - correct a subtle accounting issue in the new vector allocation code
     which went unnoticed for a while and caused suspend/resume
     failures"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
  x86/topology: Fix function name in documentation
  x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system
  x86/apic/vector: Handle vector release on CPU unplug correctly
  genirq/matrix: Handle CPU offlining proper
  x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fix from Thomas Gleixner:
"A single commit which shuts up a bogus GCC-8 warning"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
"Three patches to fix memory ordering issues on ALPHA and a comment to
  clarify the usage scope of a mutex internal function"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
  locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB
  locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
  locking/mutex: Add comment to __mutex_owner() to deter usage

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull cleanup patchlet from Thomas Gleixner:
"A single commit removing a bunch of bogus double semicolons all over
the tree"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide/trivial: Remove ';;$' typo noise

Merge tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:

- fix a broken cast in nfs4_callback_recallany()

- fix an Oops during NFSv4 migration events

- make struct nlmclnt_fl_close_lock_ops static

* tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: make struct nlmclnt_fl_close_lock_ops static
  nfs: system crashes after NFS4ERR_MOVED recovery
  NFSv4: Fix broken cast in nfs4_callback_recallany()

Merge tag 'powerpc-4.16-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Add handling for a missing instruction in our 32-bit BPF JIT so that
   it can be used for seccomp filtering.

- Add a missing NULL pointer check before a function call in new EEH
   code.

- Fix an error path in the new ocxl driver to correctly return EFAULT.

- The support for the new ibm,drc-info device tree property turns out
   to need several fixes, so for now we just stop advertising to
   firmware that we support it until the bugs can be ironed out.

- One fix for the new drmem code which was incorrectly modifying the
   device tree in place.

- Finally two fixes for the RFI flush support, so that firmware can
   advertise to us that it should be disabled entirely so as not to
   affect performance.

Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord,
Michael Bringmann.

* tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Support firmware disable of RFI flush
  powerpc/pseries: Support firmware disable of RFI flush
  powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2
  powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
  powerpc/pseries: Revert support for ibm,drc-info devtree property
  powerpc/pseries: Fix duplicate firmware feature for DRC_INFO
  ocxl: Fix potential bad errno on irq allocation
  powerpc/eeh: Fix crashes in eeh_report_resume()

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh.

2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang.

3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song.

4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang.

5) Fix potential deadlocks in netfilter getsockopt() code paths, from
    Paolo Abeni.

6) Netfilter stackpointer size checks really are needed to validate
    user input, from Florian Westphal.

7) Missing timer init in x_tables, from Paolo Abeni.

8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg.

9) When an ibmvnic device is brought down then back up again, it can be
    sent queue entries from a previous session, handle this properly
    instead of crashing. From Thomas Falcon.

10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman.

11) When we are dumping filters in cls_api, the output SKB is empty, and
    the filter we are dumping is too large for the space in the SKB, we
    should return -EMSGSIZE like other netlink dump operations do.
    Otherwise userland has no signal that is needs to increase the size
    of its read buffer. From Roman Kapl.

12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer.

13) Module refcount leak in netlink when a dump start fails, from Jason
    Donenfeld.

14) Handle sub-optimal GSO sizes better in TCP BBR congestion control,
    from Eric Dumazet.

15) Releasing bpf per-cpu arraymaps can take a long time, add a
    condtional scheduling point. From Eric Dumazet.

16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From
    Daniel Borkmann.

17) Fix page leak in gianfar driver, from Andy Spencer.

18) Missed clearing of estimator scratch buffer, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  net_sched: gen_estimator: fix broken estimators based on percpu stats
  gianfar: simplify FCS handling and fix memory leak
  ipv6 sit: work around bogus gcc-8 -Wrestrict warning
  macvlan: fix use-after-free in macvlan_common_newlink()
  bpf, arm64: fix out of bounds access in tail call
  bpf, x64: implement retpoline for tail call
  rxrpc: Fix send in rxrpc_send_data_packet()
  net: aquantia: Fix error handling in aq_pci_probe()
  bpf: fix rcu lockdep warning for lpm_trie map_free callback
  bpf: add schedule points in percpu arrays management
  regulatory: add NUL to request alpha2
  ibmvnic: Fix early release of login buffer
  net/smc9194: Remove bogus CONFIG_MAC reference
  net: ipv4: Set addr_type in hash_keys for forwarded case
  tcp_bbr: better deal with suboptimal GSO
  smsc75xx: fix smsc75xx_set_features()
  netlink: put module reference if dump start fails
  selftests/bpf/test_maps: exit child process without error in ENOMEM case
  selftests/bpf: update gitignore with test_libbpf_open
  selftests/bpf: tcpbpf_kern: use in6_* macros from glibc
  ..

Merge branch 'fixes-v4.16-rc3' of git://git./linux/kernel/git/jmorris/linux-security

Pull security subsystem fixes from James Morris:

- keys fixes via David Howells:
      "A collection of fixes for Linux keyrings, mostly thanks to Eric
       Biggers:

        - Fix some PKCS#7 verification issues.

        - Fix handling of unsupported crypto in X.509.

        - Fix too-large allocation in big_key"

- Seccomp updates via Kees Cook:
      "These are fixes for the get_metadata interface that landed during
       -rc1. While the new selftest is strictly not a bug fix, I think
       it's in the same spirit of avoiding bugs"

- an IMA build fix from Randy Dunlap

* 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  integrity/security: fix digsig.c build error with header file
  KEYS: Use individual pages in big_key for crypto buffers
  X.509: fix NULL dereference when restricting key with unsupported_sig
  X.509: fix BUG_ON() when hash algorithm is unsupported
  PKCS#7: fix direct verification of SignerInfo signature
  PKCS#7: fix certificate blacklisting
  PKCS#7: fix certificate chain verification
  seccomp: add a selftest for get_metadata
  ptrace, seccomp: tweak get_metadata behavior slightly
  seccomp, ptrace: switch get_metadata types to arch independent

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:
"arm64 and perf fixes:

   - build error when accessing MPIDR_HWID_BITMASK from .S

   - fix CTR_EL0 field definitions

   - remove/disable some kernel messages on user faults (unhandled
     signals, unimplemented syscalls)

   - fix kernel page fault in unwind_frame() with function graph tracing

   - fix perf sleeping while atomic errors when booting with ACPI"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix unwind_frame() for filtered out fn for function graph tracing
  arm64: Enforce BBM for huge IO/VMAP mappings
  arm64: perf: correct PMUVer probing
  arm_pmu: acpi: request IRQs up-front
  arm_pmu: note IRQs and PMUs per-cpu
  arm_pmu: explicitly enable/disable SPIs at hotplug
  arm_pmu: acpi: check for mismatched PPIs
  arm_pmu: add armpmu_alloc_atomic()
  arm_pmu: fold platform helpers into platform code
  arm_pmu: kill arm_pmu_platdata
  ARM: ux500: remove PMU IRQ bouncer
  arm64: __show_regs: Only resolve kernel symbols when running at EL1
  arm64: Remove unimplemented syscall log message
  arm64: Disable unhandled signal log messages by default
  arm64: cpufeature: Fix CTR_EL0 field definitions
  arm64: uaccess: Formalise types for access_ok()
  arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files

Merge tag 'mips_fixes_4.16_3' of git://git./linux/kernel/git/jhogan/mips

Pull MIPS fix from James Hogan:
"A single MIPS fix for mismatching struct compat_flock, resulting in
bus errors starting Firefox on Debian 8 since 4.13"

* tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Drop spurious __unused in struct compat_flock

Merge branch 'for-linus' of git://git./linux/kernel/git/pmladek/printk

Pull printk fixlet from Petr Mladek:
"People expect to see the real pointer value for %px.

  Let's substitute '(null)' only for the other %p? format modifiers that
  need to deference the pointer"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  vsprintf: avoid misleading "(null)" for %px

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Two bugfixes, one v4.16 regression fix, and two documentation fixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Consider SCL GPIO optional
  i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula".
  i2c: bcm2835: Set up the rising/falling edge delays
  i2c: i801: Add missing documentation entries for Braswell and Kaby Lake
  i2c: designware: must wait for enable

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"These are mostly fixes for problems with merge window code.

  In addition we have one doc update (alua) and two dead code removals
  (aiclib and octogon) a spurious assignment removal (csiostor) and a
  performance improvement for storvsc involving better interrupt
  spreading and increasing the command per lun handling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla4xxx: skip error recovery in case of register disconnect.
  scsi: aacraid: fix shutdown crash when init fails
  scsi: qedi: Cleanup local str variable
  scsi: qedi: Fix truncation of CHAP name and secret
  scsi: qla2xxx: Fix incorrect handle for abort IOCB
  scsi: qla2xxx: Fix double free bug after firmware timeout
  scsi: storvsc: Increase cmd_per_lun for higher speed devices
  scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
  scsi: scsi_dh: Document alua_rtpg_queue() arguments
  scsi: Remove Makefile entry for oktagon files
  scsi: aic7xxx: remove aiclib.c
  scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
  scsi: sym53c8xx_2: iterator underflow in sym_getsync()
  scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
  scsi: csiostor: remove redundant assignment to pointer 'ln'
  scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
  scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
  scsi: qla2xxx: Fix memory corruption during hba reset test
  scsi: mpt3sas: fix an out of bound write

Merge tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"A bunch of fixes for rc3:

  Exynos:
   - fixes for using monotonic timestamps
   - register definitions
   - removal of unused file

  ipu-v3L
   - minor changes
   - make some register arrays const+static
   - fix some leaks

  meson:
   - fix for vsync

  atomic:
   - fix for memory leak

  EDID parser:
   - add quirks for some more non-desktop devices
   - 6-bit panel fix.

  drm_mm:
   - fix a bug in the core drm mm hole handling

  cirrus:
   - fix lut loading regression

  Lastly there is a deadlock fix around runtime suspend for secondary
  GPUs.

  There was a deadlock between one thread trying to wait for a workqueue
  job to finish in the runtime suspend path, and the workqueue job it
  was waiting for in turn waiting for a runtime_get_sync to return.

  The fixes avoids it by not doing the runtime sync in the workqueue as
  then we always wait for all those tasks to complete before we runtime
  suspend"

* tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits)
  drm/tve200: fix kernel-doc documentation comment include
  drm/edid: quirk Sony PlayStation VR headset as non-desktop
  drm/edid: quirk Windows Mixed Reality headsets as non-desktop
  drm/edid: quirk Oculus Rift headsets as non-desktop
  drm/meson: fix vsync buffer update
  drm: Handle unexpected holes in color-eviction
  drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1
  drm/exynos: remove exynos_drm_rotator.h
  drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions
  drm/exynos: fix comparison to bitshift when dealing with a mask
  drm/exynos: g2d: use monotonic timestamps
  drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
  gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg
  gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image
  gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle
  gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle
  drm/amdgpu: Fix deadlock on runtime suspend
  drm/radeon: Fix deadlock on runtime suspend
  drm/nouveau: Fix deadlock on runtime suspend
  drm: Allow determining if current task is output poll worker
  ...

net_sched: gen_estimator: fix broken estimators based on percpu stats

pfifo_fast got percpu stats lately, uncovering a bug I introduced last
year in linux-4.10.

I missed the fact that we have to clear our temporary storage
before calling __gnet_stats_copy_basic() in the case of percpu stats.

Without this fix, rate estimators (tc qd replace dev xxx root est 1sec
4sec pfifo_fast) are utterly broken.

Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2018-02-22

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel.

2) cond_resched points in percpu array alloc/free paths, from Eric.

3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

gianfar: simplify FCS handling and fix memory leak

Previously, buffer descriptors containing only the frame check sequence
(FCS) were skipped and not added to the skb. However, the page reference
count was still incremented, leading to a memory leak.

Fixing this inside gfar_add_rx_frag() is difficult due to reserved
memory handling and page reuse. Instead, move the FCS handling to
gfar_process_frame() and trim off the FCS before passing the skb up the
networking stack.

Signed-off-by: Andy Spencer <aspencer@spacex.com>
Signed-off-by: Jim Gruen <jgruen@spacex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6 sit: work around bogus gcc-8 -Wrestrict warning

gcc-8 has a new warning that detects overlapping input and output arguments
in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
which is actually correct:

net/ipv6/sit.c: In function 'sit_init_net':
net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

The problem here is that the logic detecting the memcpy() arguments finds them
to be the same, but the conditional that tests for the input and output of
ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.

We know that netdev_priv(t->dev) is the same as t for a tunnel device,
and comparing "dev" directly here lets the compiler figure out as well
that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
it no longer warns.

This code is old, so Cc stable to make sure that we don't get the warning
for older kernels built with new gcc.

Cc: Martin Sebor <msebor@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

macvlan: fix use-after-free in macvlan_common_newlink()

The following use-after-free was reported by KASan when running
LTP macvtap01 test on 4.16-rc2:

[10642.528443] BUG: KASAN: use-after-free in
               macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10642.626607] Read of size 8 at addr ffff880ba49f2100 by task ip/18450
...
[10642.963873] Call Trace:
[10642.994352]  dump_stack+0x5c/0x7c
[10643.035325]  print_address_description+0x75/0x290
[10643.092938]  kasan_report+0x28d/0x390
[10643.137971]  ? macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10643.207963]  macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10643.275978]  macvtap_newlink+0x171/0x260 [macvtap]
[10643.334532]  rtnl_newlink+0xd4f/0x1300
...
[10646.256176] Allocated by task 18450:
[10646.299964]  kasan_kmalloc+0xa6/0xd0
[10646.343746]  kmem_cache_alloc_trace+0xf1/0x210
[10646.397826]  macvlan_common_newlink+0x6de/0x14a0 [macvlan]
[10646.464386]  macvtap_newlink+0x171/0x260 [macvtap]
[10646.522728]  rtnl_newlink+0xd4f/0x1300
...
[10647.022028] Freed by task 18450:
[10647.061549]  __kasan_slab_free+0x138/0x180
[10647.111468]  kfree+0x9e/0x1c0
[10647.147869]  macvlan_port_destroy+0x3db/0x650 [macvlan]
[10647.211411]  rollback_registered_many+0x5b9/0xb10
[10647.268715]  rollback_registered+0xd9/0x190
[10647.319675]  register_netdevice+0x8eb/0xc70
[10647.370635]  macvlan_common_newlink+0xe58/0x14a0 [macvlan]
[10647.437195]  macvtap_newlink+0x171/0x260 [macvtap]

Commit d02fd6e7d293 ("macvlan: Fix one possible double free") handles
the case when register_netdevice() invokes ndo_uninit() on error and
as a result free the port. But 'macvlan_port_get_rtnl(dev))' check
(returns dev->rx_handler_data), which was added by this commit in order
to prevent double free, is not quite correct:

* for macvlan it always returns NULL because 'lowerdev' is the one that
  was used to register rx handler (port) in macvlan_port_create() as
  well as to unregister it in macvlan_port_destroy().
* for macvtap it always returns a valid pointer because macvtap registers
  its own rx handler before macvlan_common_newlink().

Fixes: d02fd6e7d293 ("macvlan: Fix one possible double free")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arm64: fix unwind_frame() for filtered out fn for function graph tracing

do_task_stat() calls get_wchan(), which further does unwind_frame().
unwind_frame() restores frame->pc to original value in case function
graph tracer has modified a return address (LR) in a stack frame to hook
a function return. However, if function graph tracer has hit a filtered
function, then we can't unwind it as ftrace_push_return_trace() has
biased the index(frame->graph) with a 'huge negative'
offset(-FTRACE_NOTRACE_DEPTH).

Moreover, arm64 stack walker defines index(frame->graph) as unsigned
int, which can not compare a -ve number.

Similar problem we can have with calling of walk_stackframe() from
save_stack_trace_tsk() or dump_backtrace().

This patch fixes unwind_frame() to test the index for -ve value and
restore index accordingly before we can restore frame->pc.

Reproducer:

cd /sys/kernel/debug/tracing/
echo schedule > set_graph_notrace
echo 1 > options/display-graph
echo wakeup > current_tracer
ps -ef | grep -i agent

Above commands result in:
Unable to handle kernel paging request at virtual address ffff801bd3d1e000
pgd = ffff8003cbe97c00
[ffff801bd3d1e000] *pgd=0000000000000000, *pud=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
[...]
CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33
[...]
task: ffff8003c21ba000 task.stack: ffff8003cc6c0000
PC is at unwind_frame+0x12c/0x180
LR is at get_wchan+0xd4/0x134
pc : [<ffff00000808892c>] lr : [<ffff0000080860b8>] pstate: 60000145
sp : ffff8003cc6c3ab0
x29: ffff8003cc6c3ab0 x28: 0000000000000001
x27: 0000000000000026 x26: 0000000000000026
x25: 00000000000012d8 x24: 0000000000000000
x23: ffff8003c1c04000 x22: ffff000008c83000
x21: ffff8003c1c00000 x20: 000000000000000f
x19: ffff8003c1bc0000 x18: 0000fffffc593690
x17: 0000000000000000 x16: 0000000000000001
x15: 0000b855670e2b60 x14: 0003e97f22cf1d0f
x13: 0000000000000001 x12: 0000000000000000
x11: 00000000e8f4883e x10: 0000000154f47ec8
x9 : 0000000070f367c0 x8 : 0000000000000000
x7 : 00008003f7290000 x6 : 0000000000000018
x5 : 0000000000000000 x4 : ffff8003c1c03cb0
x3 : ffff8003c1c03ca0 x2 : 00000017ffe80000
x1 : ffff8003cc6c3af8 x0 : ffff8003d3e9e000

Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000)
Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000)
[...]
[<ffff00000808892c>] unwind_frame+0x12c/0x180
[<ffff000008305008>] do_task_stat+0x864/0x870
[<ffff000008305c44>] proc_tgid_stat+0x3c/0x48
[<ffff0000082fde0c>] proc_single_show+0x5c/0xb8
[<ffff0000082b27e0>] seq_read+0x160/0x414
[<ffff000008289e6c>] __vfs_read+0x58/0x164
[<ffff00000828b164>] vfs_read+0x88/0x144
[<ffff00000828c2e8>] SyS_read+0x60/0xc0
[<ffff0000080834a0>] __sys_trace_return+0x0/0x4

Fixes: 20380bb390a4 (arm64: ftrace: fix a stack tracer's output under function graph tracer)
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
[catalin.marinas@arm.com: replace WARN_ON with WARN_ON_ONCE]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations

Without this fix, /proc/cpuinfo will display an incorrect amount
of CPU cores, after bringing them offline and online again, as
exemplified below:

  $ cat /proc/cpuinfo | grep cores
  cpu cores : 4
  cpu cores : 8
  cpu cores : 8
  cpu cores : 20
  cpu cores : 4
  cpu cores : 3
  cpu cores : 2
  cpu cores : 2

This patch fixes this by always zeroing the booted_cores variable
upon turning off a logical CPU.

Tested-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jgross@suse.com
Cc: luto@kernel.org
Cc: prarit@redhat.com
Cc: vkuznets@redhat.com
Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.pt
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/topology: Fix function name in documentation

topology_sibling_cpumask() is the correct thread-related topology
function in the kernel:

s/topology_sibling_mask/topology_sibling_cpumask

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: corbet@lwn.net
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222084812.14497-1-douly.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs

Successful RMW operations are supposed to be fully ordered, but
Alpha's xchg() and cmpxchg() do not meet this requirement.

Will Deacon noticed the bug:

  > So MP using xchg:
  >
  > WRITE_ONCE(x, 1)
  > xchg(y, 1)
  >
  > smp_load_acquire(y) == 1
  > READ_ONCE(x) == 0
  >
  > would be allowed.

... which thus violates the above requirement.

Fix it by adding a leading smp_mb() to the xchg() and cmpxchg() implementations.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/1519291488-5752-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB

Replace each occurrence of __ASM__MB with a (trailing) smp_mb() in
xchg(), cmpxchg(), and remove the now unused __ASM__MB definitions;
this improves readability, with no additional synchronization cost.

Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/1519291469-5702-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system

If no monitoring feature is detected because all monitoring features are
disabled during boot time or there is no monitoring feature in hardware,
creating rdtgroup sub-directory by "mkdir" command reports error:

mkdir: cannot create directory ‘/sys/fs/resctrl/p1’: No such file or directory

But the sub-directory actually is generated and content is correct:

cpus cpus_list schemata tasks

The error is because rdtgroup_mkdir_ctrl_mon() returns non zero value after
the sub-directory is created and the returned value is reported as an error
to user.

Clear the returned value to report to user that the sub-directory is
actually created successfully.

Signed-off-by: Wang Hui <john.wanghui@huawei.com>
Signed-off-by: Zhang Yanfei <yanfei.zhang@huawei.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vikas <vikas.shivappa@intel.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Link: http://lkml.kernel.org/r/1519356363-133085-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/apic/vector: Handle vector release on CPU unplug correctly

When a irq vector is replaced, then the previous vector is normally
released when the first interrupt happens on the new vector. If the target
CPU of the previous vector is already offline when the new vector is
installed, then the previous vector is silently discarded, which leads to
accounting issues causing suspend failures and other problems.

Adjust the logic so that the previous vector is freed in the underlying
matrix allocator to ensure that the accounting stays correct.

Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180222112316.930791749@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

powerpc/powernv: Support firmware disable of RFI flush

Some versions of firmware will have a setting that can be configured
to disable the RFI flush, add support for it.

Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/pseries: Support firmware disable of RFI flush

Some versions of firmware will have a setting that can be configured
to disable the RFI flush, add support for it.

Fixes: 8989d56878a7 ("powerpc/pseries: Query hypervisor for RFI flush settings")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2

Memory addtion and removal by count and indexed-count methods
temporarily mark the LMBs that are being added/removed by a special
flag value DRMEM_LMB_RESERVED. Accessing flags value directly at a few
places without proper accessor method is causing two unexpected
side-effects:

- DRMEM_LMB_RESERVED bit is becoming part of the flags word of
  drconf_cell_v2 entries in ibm,dynamic-memory-v2 DT property.
- This results in extra drconf_cell entries in ibm,dynamic-memory-v2.
  For example if 1G memory is added, it leads to one entry for 3 LMBs
  and 1 separate entry for the last LMB. All the 4 LMBs should be
  defined by one entry here.

Fix this by always accessing the flags by its accessor method
drmem_lmb_flags().

Fixes: 2b31e3aec1db ("powerpc/drmem: Add support for ibm, dynamic-memory-v2 property")
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

integrity/security: fix digsig.c build error with header file

security/integrity/digsig.c has build errors on some $ARCH due to a
missing header file, so add it.

security/integrity/digsig.c:146:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: linux-integrity@vger.kernel.org
Link: http://kisskb.ellerman.id.au/kisskb/head/13396/
Signed-off-by: James Morris <james.morris@microsoft.com>

Merge tag 'keys-fixes-20180222-2' of https://git./linux/kernel/git/dhowells/linux-fs into fixes-v4.16-rc3

Keyrings fixes.

Merge tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux into drm-fixes

drm/imx: ipu-v3 fixups and grayscale support

- Make const interrupt register arrays static, reduces object size.
- Fix device_node leaks in PRE/PRG phandle lookup functions.
- Add 8-bit and 16-bit grayscale buffer support to ipu_cpmem_set_image,
- add 10-bit and 12-bit grayscale media bus support to ipu-csi,
  to be used by the imx-media driver.

* tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg
  gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image
  gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle
  gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle
  gpu: ipu-cpmem: add 8-bit grayscale support to ipu_cpmem_set_image
  gpu: ipu-v3: make const arrays int_reg static, shrinks object size

MIPS: boot: Define __ASSEMBLY__ for its.S build

The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant
when compiler_types.h was added to kconfig.h, unexpected things appeared
(e.g. struct declarations) which should not have been present. As done in
the general %.S compiler command, __ASSEMBLY__ is now included here too.

The failure was:

    Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error
    FATAL ERROR: Unable to parse input tree
    /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument
    /usr/bin/mkimage Can't add hashes to FIT blob

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'siginfo-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull siginfo fix from Eric Biederman:
"This fixes a build error that only shows up on blackfin"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
fs/signalfd: fix build error for BUS_MCEERR_AR

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
"Fix an oops in the s5p-sss driver when used with ecb(aes)"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s5p-sss - Fix kernel Oops in AES-ECB mode

bpf, arm64: fix out of bounds access in tail call

I recently noticed a crash on arm64 when feeding a bogus index
into BPF tail call helper. The crash would not occur when the
interpreter is used, but only in case of JIT. Output looks as
follows:

  [  347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510
  [...]
  [  347.043065] [fffb850e96492510] address between user and kernel address ranges
  [  347.050205] Internal error: Oops: 96000004 [#1] SMP
  [...]
  [  347.190829] x13: 0000000000000000 x12: 0000000000000000
  [  347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10
  [  347.201427] x9 : 0000000000000000 x8 : 0000000000000000
  [  347.206726] x7 : 0000000000000000 x6 : 001c991738000000
  [  347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a
  [  347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500
  [  347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500
  [  347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61)
  [  347.235221] Call trace:
  [  347.237656]  0xffff000002f3a4fc
  [  347.240784]  bpf_test_run+0x78/0xf8
  [  347.244260]  bpf_prog_test_run_skb+0x148/0x230
  [  347.248694]  SyS_bpf+0x77c/0x1110
  [  347.251999]  el0_svc_naked+0x30/0x34
  [  347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b)
  [...]

In this case the index used in BPF r3 is the same as in r1
at the time of the call, meaning we fed a pointer as index;
here, it had the value 0xffff808fd7cf0500 which sits in x2.

While I found tail calls to be working in general (also for
hitting the error cases), I noticed the following in the code
emission:

  # bpftool p d j i 988
  [...]
  38:   ldr     w10, [x1,x10]
  3c:   cmp     w2, w10
  40:   b.ge    0x000000000000007c              <-- signed cmp
  44:   mov     x10, #0x20                      // #32
  48:   cmp     x26, x10
  4c:   b.gt    0x000000000000007c
  50:   add     x26, x26, #0x1
  54:   mov     x10, #0x110                     // #272
  58:   add     x10, x1, x10
  5c:   lsl     x11, x2, #3
  60:   ldr     x11, [x10,x11]                  <-- faulting insn (f86b694b)
  64:   cbz     x11, 0x000000000000007c
  [...]

Meaning, the tests passed because commit ddb55992b04d ("arm64:
bpf: implement bpf_tail_call() helper") was using signed compares
instead of unsigned which as a result had the test wrongly passing.

Change this but also the tail call count test both into unsigned
and cap the index as u32. Latter we did as well in 90caccdd8cc0
("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here,
too. Tested on HiSilicon Hi1616.

Result after patch:

  # bpftool p d j i 268
  [...]
  38: ldr w10, [x1,x10]
  3c: add w2, w2, #0x0
  40: cmp w2, w10
  44: b.cs 0x0000000000000080
  48: mov x10, #0x20                   // #32
  4c: cmp x26, x10
  50: b.hi 0x0000000000000080
  54: add x26, x26, #0x1
  58: mov x10, #0x110                  // #272
  5c: add x10, x1, x10
  60: lsl x11, x2, #3
  64: ldr x11, [x10,x11]
  68: cbz x11, 0x0000000000000080
  [...]

Fixes: ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf, x64: implement retpoline for tail call

Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).

JIT dump after patch:

  # bpftool p d x i 1
   0: (18) r2 = map[id:1]
   2: (b7) r3 = 0
   3: (85) call bpf_tail_call#12
   4: (b7) r0 = 2
   5: (95) exit

With CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33: cmp    %edx,0x24(%rsi)
  36: jbe    0x0000000000000072  |*
  38: mov    0x24(%rbp),%eax
  3e: cmp    $0x20,%eax
  41: ja     0x0000000000000072  |
  43: add    $0x1,%eax
  46: mov    %eax,0x24(%rbp)
  4c: mov    0x90(%rsi,%rdx,8),%rax
  54: test   %rax,%rax
  57: je     0x0000000000000072  |
  59: mov    0x28(%rax),%rax
  5d: add    $0x25,%rax
  61: callq  0x000000000000006d  |+
  66: pause                      |
  68: lfence                     |
  6b: jmp    0x0000000000000066  |
  6d: mov    %rax,(%rsp)         |
  71: retq                       |
  72: mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  + retpoline for indirect jump

Without CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33: cmp    %edx,0x24(%rsi)
  36: jbe    0x0000000000000063  |*
  38: mov    0x24(%rbp),%eax
  3e: cmp    $0x20,%eax
  41: ja     0x0000000000000063  |
  43: add    $0x1,%eax
  46: mov    %eax,0x24(%rbp)
  4c: mov    0x90(%rsi,%rdx,8),%rax
  54: test   %rax,%rax
  57: je     0x0000000000000063  |
  59: mov    0x28(%rax),%rax
  5d: add    $0x25,%rax
  61: jmpq   *%rax               |-
  63: mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  - plain indirect jump as before

  [0] https://support.google.com/faqs/answer/7625886
  [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

genirq/matrix: Handle CPU offlining proper

At CPU hotunplug the corresponding per cpu matrix allocator is shut down and
the allocated interrupt bits are discarded under the assumption that all
allocated bits have been either migrated away or shut down through the
managed interrupts mechanism.

This is not true because interrupts which are not started up might have a
vector allocated on the outgoing CPU. When the interrupt is started up
later or completely shutdown and freed then the allocated vector is handed
back, triggering warnings or causing accounting issues which result in
suspend failures and other issues.

Change the CPU hotplug mechanism of the matrix allocator so that the
remaining allocations at unplug time are preserved and global accounting at
hotplug is correctly readjusted to take the dormant vectors into account.

Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator")
Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180222112316.849980972@linutronix.de

fs/signalfd: fix build error for BUS_MCEERR_AR

Fix build error in fs/signalfd.c by using same method that is used in
kernel/signal.c: separate blocks for different signal si_code values.

./fs/signalfd.c: error: 'BUS_MCEERR_AR' undeclared (first use in this function)

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

rxrpc: Fix send in rxrpc_send_data_packet()

All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send
both parts of the iov[] buffer, but one of them does not. Fix it so that
it does.

Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc
header included, but no payload.

Fixes: 5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: Fix error handling in aq_pci_probe()

We should check "self->aq_hw" for allocation failure, and also we should
free it on the error paths.

Fixes: 23ee07ad3c2f ("net: aquantia: Cleanup pci functions module")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: fix rcu lockdep warning for lpm_trie map_free callback

Commit 9a3efb6b661f ("bpf: fix memory leak in lpm_trie map_free callback function")
fixed a memory leak and removed unnecessary locks in map_free callback function.
Unfortrunately, it introduced a lockdep warning. When lockdep checking is turned on,
running tools/testing/selftests/bpf/test_lpm_map will have:

  [   98.294321] =============================
  [   98.294807] WARNING: suspicious RCU usage
  [   98.295359] 4.16.0-rc2+ #193 Not tainted
  [   98.295907] -----------------------------
  [   98.296486] /home/yhs/work/bpf/kernel/bpf/lpm_trie.c:572 suspicious rcu_dereference_check() usage!
  [   98.297657]
  [   98.297657] other info that might help us debug this:
  [   98.297657]
  [   98.298663]
  [   98.298663] rcu_scheduler_active = 2, debug_locks = 1
  [   98.299536] 2 locks held by kworker/2:1/54:
  [   98.300152]  #0:  ((wq_completion)"events"){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0
  [   98.301381]  #1:  ((work_completion)(&map->work)){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0

Since actual trie tree removal happens only after no other
accesses to the tree are possible, replacing
  rcu_dereference_protected(*slot, lockdep_is_held(&trie->lock))
with
  rcu_dereference_protected(*slot, 1)
fixed the issue.

Fixes: 9a3efb6b661f ("bpf: fix memory leak in lpm_trie map_free callback function")
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: add schedule points in percpu arrays management

syszbot managed to trigger RCU detected stalls in
bpf_array_free_percpu()

It takes time to allocate a huge percpu map, but even more time to free
it.

Since we run in process context, use cond_resched() to yield cpu if
needed.

Fixes: a10423b87a7e ("bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Merge tag 'mac80211-for-davem-2018-02-22' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Various fixes across the tree, the shortlog basically says it all:

  cfg80211: fix cfg80211_beacon_dup
  -> old bug in this code

  cfg80211: clear wep keys after disconnection
  -> certain ways of disconnecting left the keys

  mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
  -> alignment issues with using 14 bytes

  mac80211: Do not disconnect on invalid operating class
  -> if the AP has a bogus operating class, let it be

  mac80211: Fix sending ADDBA response for an ongoing session
  -> don't send the same frame twice

  cfg80211: use only 1Mbps for basic rates in mesh
  -> interop issue with old versions of our code

  mac80211_hwsim: don't use WQ_MEM_RECLAIM
  -> it causes splats because it flushes work on a non-reclaim WQ

  regulatory: add NUL to request alpha2
  -> nla_put_string() issue from Kees

  mac80211: mesh: fix wrong mesh TTL offset calculation
  -> protocol issue

  mac80211: fix a possible leak of station stats
  -> error path might leak memory

  mac80211: fix calling sleeping function in atomic context
  -> percpu allocations need to be made with gfp flags
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'usb-4.16-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 4.16-rc3

  Nothing major, but a number of different fixes all over the place in
  the USB stack for reported issues. Mostly gadget driver fixes,
  although the typical set of xhci bugfixes are there, along with some
  new quirks additions as well.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
  Revert "usb: musb: host: don't start next rx urb if current one failed"
  usb: musb: fix enumeration after resume
  usb: cdc_acm: prevent race at write to acm while system resumes
  Add delay-init quirk for Corsair K70 RGB keyboards
  usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
  usb: host: ehci: always enable interrupt for qtd completion at test mode
  usb: ldusb: add PIDs for new CASSY devices supported by this driver
  usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path
  usb: host: ehci: use correct device pointer for dma ops
  usbip: keep usbip_device sockfd state in sync with tcp_socket
  ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
  USB: serial: option: Add support for Quectel EP06
  xhci: fix xhci debugfs errors in xhci_stop
  xhci: xhci debugfs device nodes weren't removed after device plugged out
  xhci: Fix xhci debugfs devices node disappearance after hibernation
  xhci: Fix NULL pointer in xhci debugfs
  xhci: Don't print a warning when setting link state for disabled ports
  xhci: workaround for AMD Promontory disabled ports wakeup
  usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
  USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
  ...