Alex Deucher [Mon, 13 Jun 2016 22:59:17 +0000 (18:59 -0400)]
Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx"
This reverts commit
2ba272d7bde27e1db2cf1c6cee49b01b7ea08989.
The issue fixed by this patch is specific to compute rings and the
previous patch was enough. Additionally, this patch as been traced
to strange behavior on some CZ systems so we might as well drop it.
Alex Deucher [Mon, 13 Jun 2016 22:26:24 +0000 (18:26 -0400)]
drm/amdgpu/gfx7: fix broken condition check
Wrong operator.
Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Mon, 13 Jun 2016 19:37:34 +0000 (15:37 -0400)]
drm/radeon: fix asic initialization for virtualized environments
When executing in a PCI passthrough based virtuzliation environment, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.
Ported from amdgpu commit:
amdgpu: fix asic initialization for virtualized environments
Cc: Andres Rodriguez <andres.rodriguez@amd.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Andres Rodriguez [Sat, 11 Jun 2016 06:51:32 +0000 (02:51 -0400)]
amdgpu: fix asic initialization for virtualized environments (v2)
When executing in a PCI passthrough based virtuzliation environemnt, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.
However, if we are operating in SR-IOV mode it is up to the GIM driver
to manage the asic state, therefore we should not post the card (and
shouldn't be able to do it either).
v2: add missing semi-colon
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 13 Jun 2016 14:09:53 +0000 (16:09 +0200)]
drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled
Seems to cause problems for some older hardware. Kudos to Thom Kouwenhoven
for working a lot with the PLLs and figuring this out.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jérôme Glisse [Tue, 7 Jun 2016 21:43:04 +0000 (17:43 -0400)]
drm/radeon: do not hard reset GPU while freezing on r600/r700 family
Seems r600/r700 does not like hard reset while freezing for hibernation
(regression due to
274ad65c9d02bdcbee9bae045517864c3521d530 which itself
is a fix for hibernation on some GPU families). Until i can debug further
issue with r600, let just disable this for r600/r700 as they are very
similar family and bug affecting one likely affect the other.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 10 Jun 2016 23:34:20 +0000 (09:34 +1000)]
Merge tag 'drm-amdkfd-fixes-2016-06-03' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
* tag 'drm-amdkfd-fixes-2016-06-03' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: print once about mem_banks truncation
drm/amdkfd: destroy dbgmgr in notifier release
drm/amdkfd: unbind only existing processes
Dave Airlie [Fri, 10 Jun 2016 02:17:46 +0000 (12:17 +1000)]
Merge branch 'fixes-for-v4.7-rc3' of git.agner.ch/git/linux-drm-fsl-dcu into drm-fixes
* 'fixes-for-v4.7-rc3' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: use flat regmap cache
Dave Airlie [Fri, 10 Jun 2016 01:40:49 +0000 (11:40 +1000)]
drm/amdgpu: fix warning with powerplay disabled.
This just fixes a warning when you disable powerplay.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 9 Jun 2016 23:46:59 +0000 (09:46 +1000)]
Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Mostly memory leak and firmware leak fixes for amdgpu. A bit bigger than
usual since this is several weeks worth of fixes.
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: (28 commits)
drm/amd/powerplay: delete useless code as pptable changed in vbios.
drm/amd/powerplay: fix bug visit array out of bounds
drm/amdgpu: fix smu ucode memleak (v2)
drm/amdgpu: add release firmware for cgs
drm/amdgpu: fix tonga smu_fini mem leak
drm/amdgpu: fix fiji smu fini mem leak
drm/amdgpu: fix cik sdma ucode memleak
drm/amdgpu: fix sdma24 ucode mem leak
drm/amdgpu: fix sdma3 ucode mem leak
drm/amdgpu: fix uvd fini mem leak
drm/amdgpu: fix gfx 7 ucode mem leak
drm/amdgpu: fix gfx8 ucode mem leak
drm/amdgpu: fix missing free wb for cond_exec
drm/amdgpu: fix memleak in pptable_init
drm/amdgpu: fix mem leak in atombios
drm/amdgpu: fix mem leak in pplib/hwmgr
drm/amdgpu: fix mem leak in smumgr
drm/amdgpu: add pipeline sync while vmid switch in same ctx
drm/amdgpu: vBIOS post only call when mem_size zero
drm/amdgpu: modify sdma start sequence
...
Dave Airlie [Thu, 9 Jun 2016 23:45:42 +0000 (09:45 +1000)]
Merge branch 'msm-fixes-4.7-rc3' of git://people.freedesktop.org/~robclark/linux into drm-fixes
* 'msm-fixes-4.7-rc3' of git://people.freedesktop.org/~robclark/linux:
drm/msm: fix potential submit error path issue
drm/msm: fix some crashes in submit fail path
drm/msm: deal with exhausted vmap space better
Rex Zhu [Fri, 3 Jun 2016 11:12:42 +0000 (19:12 +0800)]
drm/amd/powerplay: delete useless code as pptable changed in vbios.
The vbios table changed so this code is useless now.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 2 Jun 2016 11:11:01 +0000 (19:11 +0800)]
drm/amd/powerplay: fix bug visit array out of bounds
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 31 May 2016 05:44:48 +0000 (13:44 +0800)]
drm/amdgpu: fix smu ucode memleak (v2)
Properly release the smu ucode in powerplay.
v2: agd: add polaris as well
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 31 May 2016 05:44:30 +0000 (13:44 +0800)]
drm/amdgpu: add release firmware for cgs
Powerplay uses cgs to load the firmware so add a function
to release it as well to avoid leaking it on driver unload.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 07:16:26 +0000 (15:16 +0800)]
drm/amdgpu: fix tonga smu_fini mem leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 07:16:04 +0000 (15:16 +0800)]
drm/amdgpu: fix fiji smu fini mem leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 08:07:40 +0000 (16:07 +0800)]
drm/amdgpu: fix cik sdma ucode memleak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 08:05:58 +0000 (16:05 +0800)]
drm/amdgpu: fix sdma24 ucode mem leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 07:15:32 +0000 (15:15 +0800)]
drm/amdgpu: fix sdma3 ucode mem leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 07:13:59 +0000 (15:13 +0800)]
drm/amdgpu: fix uvd fini mem leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 08:01:48 +0000 (16:01 +0800)]
drm/amdgpu: fix gfx 7 ucode mem leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 06:18:57 +0000 (14:18 +0800)]
drm/amdgpu: fix gfx8 ucode mem leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 06:17:42 +0000 (14:17 +0800)]
drm/amdgpu: fix missing free wb for cond_exec
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 30 May 2016 05:43:45 +0000 (13:43 +0800)]
drm/amdgpu: fix memleak in pptable_init
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 27 May 2016 11:34:11 +0000 (19:34 +0800)]
drm/amdgpu: fix mem leak in atombios
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 27 May 2016 11:09:06 +0000 (19:09 +0800)]
drm/amdgpu: fix mem leak in pplib/hwmgr
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 27 May 2016 09:52:58 +0000 (17:52 +0800)]
drm/amdgpu: fix mem leak in smumgr
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chunming Zhou [Wed, 27 Apr 2016 10:07:41 +0000 (18:07 +0800)]
drm/amdgpu: add pipeline sync while vmid switch in same ctx
Since vmid-mgr supports vmid sharing in one vm, the same ctx could
get different vmids for two emits without vm flush, vm_flush could
be done in another ring.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 24 May 2016 05:23:46 +0000 (13:23 +0800)]
drm/amdgpu: vBIOS post only call when mem_size zero
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 25 May 2016 08:57:14 +0000 (16:57 +0800)]
drm/amdgpu: modify sdma start sequence
should fist halt engine, and then doing the register
programing, and later unhalt engine, and finally run
ring_test.
this help fix reloading driver hang issue of SDMA
ring
original sequence is wrong for it programing engine
after unhalt, which will lead to fault behavior when
doing driver reloading after unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 25 May 2016 08:55:50 +0000 (16:55 +0800)]
drm/amdgpu: init more register for sdma
This help fix reloading driver hang issue of SDMA
ring
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 25 May 2016 08:55:07 +0000 (16:55 +0800)]
drm/amdgpu: clear SA bo when created
This help fix reloading driver hang issue of SDMA
ring
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Jun 2016 15:09:01 +0000 (11:09 -0400)]
drm/amdgpu: fix fw leak in non-powerplay dpm code
We need to release the firmware on driver tear down.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 19 May 2016 06:36:34 +0000 (14:36 +0800)]
drm/amdgpu: fix pplib finish bug
1,should use late_fini to kfree all resource otherwise
the released pointer maybe accessed in IRQ ip fini routine.
2,hwmgr should not be kfree by pem_fini which is invoked
by hw fini path.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 19 May 2016 06:36:01 +0000 (14:36 +0800)]
drm/amdgpu: impl late_fini for amdgpu_pp_ip
This implements late_init support for powerplay.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 19 May 2016 06:35:17 +0000 (14:35 +0800)]
drm/amdgpu: add late_fini for ip_funcs
This give IP modules an optional late cleanup
function. This is needed to handle tricky inter-module
dependencies during tear down.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 23 May 2016 10:24:41 +0000 (18:24 +0800)]
drm/admgpu/powerplay/polaris: fix powertune table upload
Exclude AVFS related fields when update powertune table to hw.
The driver shouldn't set them directly.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ken Wang [Tue, 24 May 2016 01:26:27 +0000 (09:26 +0800)]
drm/amdgpu/iceland: Set SC_PA_RASTER_CONFIG according to different RB enabled
fix the raster config setting for different iceland configs.
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 9 Jun 2016 02:32:09 +0000 (12:32 +1000)]
Merge tag 'drm-vc4-fixes-2016-06-06' of github.com:anholt/linux into drm-fixes
This pull request brings in vblank/pageflip fixes I had hoped to see
merged before 4.7rc1, plus two new fixes that have come in since then.
* tag 'drm-vc4-fixes-2016-06-06' of github.com:anholt/linux:
drm/vc4: Make pageflip completion handling more robust.
drm/vc4: Fix ioctl permissions for render nodes.
drm/vc4: Return -EBUSY if there's already a pending flip event.
drm/vc4: Fix drm_vblank_put/get imbalance in page flip path.
drm/vc4: Fix get_vblank_counter with proper no-op for Linux 4.4+
Tomi Valkeinen [Fri, 3 Jun 2016 11:27:03 +0000 (14:27 +0300)]
drm/omap: fix unused variable warning in dsi & hdmi
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 9 Jun 2016 02:30:29 +0000 (12:30 +1000)]
Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-fixes
Fixes for two issues reported by KASAN, a display engine hang due to
incorrect BIOS table parsing, and incorrect LTC interrupt handling on
Maxwell which could lead to a never-ending interrupt storm.
* 'linux-4.7' of git://github.com/skeggsb/linux:
drm/nouveau/disp/sor/gm107: training pattern registers are like gm200
drm/nouveau/disp/sor/gf119: both links use the same training register
drm/nouveau/core: swap the order of imem/fb
drm/nouveau/fbcon: fix out-of-bounds memory accesses
drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers
drm/nouveau/ltc/gm107-: fix typo in the address of NV_PLTCG_LTC0_LTS0_INTR
drm/nouveau/bios/disp: fix handling of "match any protocol" entries
Stefan Agner [Fri, 3 Jun 2016 21:21:34 +0000 (14:21 -0700)]
drm/fsl-dcu: use flat regmap cache
Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x15c/0x160()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the FSL DCU driver uses MMIO, the regmap bus of type
regmap_mmio is being used which has fast_io set to true.
Use flat regmap cache and specify max register to be large
enouth to cover all registers available in LS1021a and Vybrids
register space.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Cc: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Ben Skeggs [Fri, 3 Jun 2016 05:05:52 +0000 (15:05 +1000)]
drm/nouveau/disp/sor/gm107: training pattern registers are like gm200
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Ben Skeggs [Fri, 3 Jun 2016 04:37:40 +0000 (14:37 +1000)]
drm/nouveau/disp/sor/gf119: both links use the same training register
It appears that, for whatever reason, both link A and B use the same
register to control the training pattern. It's a little odd, as the
GPUs before this (Tesla/Fermi1) have per-link registers, as do newer
GPUs (Maxwell).
Fixes the third DP output on NVS 510 (GK107).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Mario Kleiner [Wed, 18 May 2016 12:02:46 +0000 (14:02 +0200)]
drm/vc4: Make pageflip completion handling more robust.
Protect both the setup of the pageflip event and the
latching of the new requested displaylist head pointer
by the event lock, so we can't get into a situation
where vc4_atomic_flush latches the new display list via
HVS_WRITE, then immediately gets preempted before queueing
the pageflip event, then the page-flip completes in hw and
the vc4_crtc_handle_page_flip() runs and no-ops due to
lack of a pending pageflip event, then vc4_atomic_flush
continues and only then queues the pageflip event - after
the page flip handling already no-oped. This would cause
flip completion handling only at the next vblank - one
frame too late.
In vc4_crtc_handle_page_flip() check the actual DL head
pointer in SCALER_DISPLACTX against the requested pointer
for page flip to make sure that the flip actually really
completed in the current vblank and doesn't get deferred
to the next one because the DL head pointer was written
a bit too late into SCALER_DISPLISTX, after start of
vblank, and missed the boat. This avoids handling a
pageflip completion too early - one frame too early.
According to Eric, DL head pointer updates which were
written into the HVS DISPLISTX reg get committed to hardware
at the last pixel of active scanout. Our vblank interrupt
handler, as triggered by PV_INT_VFP_START irq, gets to run
earliest at the first pixel of HBLANK at the end of the
last scanline of active scanout, ie. vblank irq handling
runs at least 1 pixel duration after a potential pageflip
completion happened in hardware.
This ordering of events in the hardware, together with the
lock protection and SCALER_DISPLACTX sampling of this patch,
guarantees that pageflip completion handling only runs at
exactly the vblank irq of actual pageflip completion in all
cases.
Background info from Eric about the relative timing of
HVS, PV's and trigger points for interrupts, DL updates:
https://lists.freedesktop.org/archives/dri-devel/2016-May/107510.html
Tested on RPi 2B with hardware timing measurement equipment
and shown to no longer complete flips too early or too late.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Herve Jourdain [Tue, 31 May 2016 18:24:46 +0000 (02:24 +0800)]
drm/vc4: Fix ioctl permissions for render nodes.
Contrary to other flags to DRM_IOCTL_DEF_DRV(), which restrict usage,
the flag for render node is an enabler (the IOCTL can't be used from
render node if it's not present). So DRM_RENDER_ALLOW needs to be
added to all the flags that were previously 0.
Signed-off-by: Herve Jourdain <herve.jourdain@neuf.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes: 0cd3e2747662 ("drm/vc4: Add missing render node support")
Linus Torvalds [Sun, 5 Jun 2016 21:31:26 +0000 (14:31 -0700)]
Linux 4.7-rc2
Linus Torvalds [Sun, 5 Jun 2016 18:15:33 +0000 (11:15 -0700)]
Merge branch 'parisc-4.7-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix printk time stamps on SMP systems which got wrong due to a patch
which was added during the merge window
- Fix two bugs in the stack backtrace code: Races in module unloading
and possible invalid accesses to memory due to wrong instruction
decoding (Mikulas Patocka)
- Fix userspace crash when syscalls access invalid unaligned userspace
addresses. Those syscalls will now return EFAULT as expected.
(tagged for stable kernel series)
* 'parisc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Move die_if_kernel() prototype into traps.h header
parisc: Fix pagefault crash in unaligned __get_user() call
parisc: Fix printk time during boot
parisc: Fix backtrace on PA-RISC
Linus Torvalds [Sun, 5 Jun 2016 18:02:00 +0000 (11:02 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull key handling update from James Morris:
"This alters a new keyctl function added in the current merge window to
allow for a future extension planned for the next merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: Add placeholder for KDF usage with DH
Eric W. Biederman [Thu, 2 Jun 2016 15:29:47 +0000 (10:29 -0500)]
devpts: Make each mount of devpts an independent filesystem.
The /dev/ptmx device node is changed to lookup the directory entry "pts"
in the same directory as the /dev/ptmx device node was opened in. If
there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx
uses that filesystem. Otherwise the open of /dev/ptmx fails.
The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that
userspace can now safely depend on each mount of devpts creating a new
instance of the filesystem.
Each mount of devpts is now a separate and equal filesystem.
Reserved ttys are now available to all instances of devpts where the
mounter is in the initial mount namespace.
A new vfs helper path_pts is introduced that finds a directory entry
named "pts" in the directory of the passed in path, and changes the
passed in path to point to it. The helper path_pts uses a function
path_parent_directory that was factored out of follow_dotdot.
In the implementation of devpts:
- devpts_mnt is killed as it is no longer meaningful if all mounts of
devpts are equal.
- pts_sb_from_inode is replaced by just inode->i_sb as all cached
inodes in the tty layer are now from the devpts filesystem.
- devpts_add_ref is rolled into the new function devpts_ptmx. And the
unnecessary inode hold is removed.
- devpts_del_ref is renamed devpts_release and reduced to just a
deacrivate_super.
- The newinstance mount option continues to be accepted but is now
ignored.
In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as
they are never used.
Documentation/filesystems/devices.txt is updated to describe the current
situation.
This has been verified to work properly on openwrt-15.05, centos5,
centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3,
ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1,
slackware-14.1, gentoo-
20151225 (13.0?), archlinux-2015-12-01. With the
caveat that on centos6 and on slackware-14.1 that there wind up being
two instances of the devpts filesystem mounted on /dev/pts, the lower
copy does not end up getting used.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Helge Deller [Sat, 4 Jun 2016 15:38:09 +0000 (17:38 +0200)]
parisc: Move die_if_kernel() prototype into traps.h header
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sat, 4 Jun 2016 15:21:33 +0000 (17:21 +0200)]
parisc: Fix pagefault crash in unaligned __get_user() call
One of the debian buildd servers had this crash in the syslog without
any other information:
Unaligned handler failed, ret = -2
clock_adjtime (pid 22578): Unaligned data reference (code 28)
CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G E 4.5.0-2-parisc64-smp #1 Debian 4.5.4-1
task:
000000007d9960f8 ti:
00000001bde7c000 task.ti:
00000001bde7c000
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW:
00001000000001001111100000001111 Tainted: G E
r00-03
000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0
r04-07
00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff
r08-11
0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4
r12-15
000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b
r16-19
0000000000028800 0000000000000001 0000000000000070 00000001bde7c218
r20-23
0000000000000000 00000001bde7c210 0000000000000002 0000000000000000
r24-27
0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0
r28-31
0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218
sr00-03
0000000001200000 0000000001200000 0000000000000000 0000000001200000
sr04-07
0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ:
0000000000000000 0000000000000000 IAOQ:
00000000402d2e84 00000000402d2e88
IIR:
0ca0d089 ISR:
0000000001200000 IOR:
00000000fa6f7fff
CPU: 1 CR30:
00000001bde7c000 CR31:
ffffffffffffffff
ORIG_R28:
00000002369fe628
IAOQ[0]: compat_get_timex+0x2dc/0x3c0
IAOQ[1]: compat_get_timex+0x2e0/0x3c0
RP(r2): compat_get_timex+0x40/0x3c0
Backtrace:
[<
00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0
[<
0000000040205024>] syscall_exit+0x0/0x14
This means the userspace program clock_adjtime called the clock_adjtime()
syscall and then crashed inside the compat_get_timex() function.
Syscalls should never crash programs, but instead return EFAULT.
The IIR register contains the executed instruction, which disassebles
into "ldw 0(sr3,r5),r9".
This load-word instruction is part of __get_user() which tried to read the word
at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in. The
unaligned handler is able to emulate all ldw instructions, but it fails if it
fails to read the source e.g. because of page fault.
The following program reproduces the problem:
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>
int main(void) {
/* allocate 8k */
char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
/* free second half (upper 4k) and make it invalid. */
munmap(ptr+4096, 4096);
/* syscall where first int is unaligned and clobbers into invalid memory region */
/* syscall should return EFAULT */
return syscall(__NR_clock_adjtime, 0, ptr+4095);
}
To fix this issue we simply need to check if the faulting instruction address
is in the exception fixup table when the unaligned handler failed. If it
is, call the fixup routine instead of crashing.
While looking at the unaligned handler I found another issue as well: The
target register should not be modified if the handler was unsuccessful.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Helge Deller [Fri, 3 Jun 2016 17:22:31 +0000 (19:22 +0200)]
parisc: Fix printk time during boot
Avoid showing invalid printk time stamps during boot.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Mikulas Patocka [Tue, 28 Jun 2011 22:48:19 +0000 (00:48 +0200)]
parisc: Fix backtrace on PA-RISC
This patch fixes backtrace on PA-RISC
There were several problems:
1) The code that decodes instructions handles instructions that subtract
from the stack pointer incorrectly. If the instruction subtracts the
number X from the stack pointer the code increases the frame size by
(0x100000000-X). This results in invalid accesses to memory and
recursive page faults.
2) Because gcc reorders blocks, handling instructions that subtract from
the frame pointer is incorrect. For example, this function
int f(int a)
{
if (__builtin_expect(a, 1))
return a;
g();
return a;
}
is compiled in such a way, that the code that decreases the stack
pointer for the first "return a" is placed before the code for "g" call.
If we recognize this decrement, we mistakenly believe that the frame
size for the "g" call is zero.
To fix problems 1) and 2), the patch doesn't recognize instructions that
decrease the stack pointer at all. To further safeguard the unwind code
against nonsense values, we don't allow frame size larger than
Total_frame_size.
3) The backtrace is not locked. If stack dump races with module unload,
invalid table can be accessed.
This patch adds a spinlock when processing module tables.
Note, that for correct backtrace, you need recent binutils.
Binutils 2.18 from Debian 5 produce garbage unwind tables.
Binutils 2.21 work better (it sometimes forgets function frames, but at
least it doesn't generate garbage).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Linus Torvalds [Sat, 4 Jun 2016 19:30:36 +0000 (12:30 -0700)]
Merge tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of ARM drivers got into the fixes vibe this time around, so
this contains a bunch of fixes for imx, atmel hlcdc, arm hdlcd (only
so many combos of hlcd), mediatek and omap drm.
Other than that there is one mgag200 fix and a few core drm regression
fixes"
* tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux: (34 commits)
drm/omap: fix unused variable warning.
drm: hdlcd: Add information about the underlying framebuffers in debugfs
drm: hdlcd: Cleanup the atomic plane operations
drm/hdlcd: Fix up crtc_state->event handling
drm: hdlcd: Revamp runtime power management
drm/mediatek: mtk_dsi: Remove spurious drm_connector_unregister
drm/mediatek: mtk_dpi: remove invalid error message
drm: atmel-hlcdc: fix a NULL check
drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation
drm/mgag200: Black screen fix for G200e rev 4
drm: Wrap direct calls to driver->gem_free_object from CMA
drm: fix fb refcount issue with atomic modesetting
drm: make drm_atomic_set_mode_prop_for_crtc() more reliable
drm/sti: remove extra mode fixup
drm: add missing drm_mode_set_crtcinfo call
drm/omap: include gpio/consumer.h where needed
drm/omap: include linux/seq_file.h where needed
Revert "drm/omap: no need to select OMAP2_DSS"
drm/omap: Remove regulator API abuse
OMAPDSS: HDMI5: Change DDC timings
...
Linus Torvalds [Sat, 4 Jun 2016 19:25:36 +0000 (12:25 -0700)]
Merge tag 'vfio-v4.7-rc2' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
"Fix irqfd shutdown ordering, build warning, and VPD short read"
* tag 'vfio-v4.7-rc2' of git://github.com/awilliam/linux-vfio:
vfio/pci: Allow VPD short read
vfio/type1: Fix build warning
vfio/pci: Fix ordering of eventfd vs virqfd shutdown
Linus Torvalds [Sat, 4 Jun 2016 19:20:26 +0000 (12:20 -0700)]
Merge tag 'mmc-v4.7-rc1-2' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix/restore behaviour when selecting bus width for (e)MMC
MMC host:
- sunxi: Fix eMMC HS-DDR modes on Allwinner A80"
* tag 'mmc-v4.7-rc1-2' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sunxi: Re-enable eMMC HS-DDR modes on Allwinner A80
mmc: sunxi: Fix DDR MMC timings for A80
mmc: fix mmc mode selection for HS-DDR and higher
Linus Torvalds [Sat, 4 Jun 2016 18:56:28 +0000 (11:56 -0700)]
Merge branch 'for-linus-4.7' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"The important part of this pull is Filipe's set of fixes for btrfs
device replacement. Filipe fixed a few issues seen on the list and a
number he found on his own"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent
Btrfs: fix race between device replace and read repair
Btrfs: fix race between device replace and discard
Btrfs: fix race between device replace and chunk allocation
Btrfs: fix race setting block group back to RW mode during device replace
Btrfs: fix unprotected assignment of the left cursor for device replace
Btrfs: fix race setting block group readonly during device replace
Btrfs: fix race between device replace and block group removal
Btrfs: fix race between readahead and device replace/removal
Rob Clark [Wed, 1 Jun 2016 18:02:51 +0000 (14:02 -0400)]
drm/msm: fix potential submit error path issue
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 24 May 2016 22:43:26 +0000 (18:43 -0400)]
drm/msm: fix some crashes in submit fail path
If submit fails, before fence is created or before submit is added to
submit-list, then unitialized fields cause problems in the clean-up
path.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 24 May 2016 22:29:38 +0000 (18:29 -0400)]
drm/msm: deal with exhausted vmap space better
Some, but not all, callers of obj->vmap() would check if return
IS_ERR(). So let's actually return an error if vmap() fails. And fixup
the call-sites that were not handling this properly.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Linus Torvalds [Sat, 4 Jun 2016 18:37:53 +0000 (11:37 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"We have a few follow-up fixes for the libceph refactor from Ilya, and
then some cephfs + fscache fixes from Zheng.
The first two FS-Cache patches are acked by David Howells and deemed
trivial enough to go through our tree. The rest fix some issues with
the ceph fscache handling (disable cache for inodes opened for write,
and simplify the revalidation logic accordingly, dropping the
now-unnecessary work queue)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: use i_version to check validity of fscache
ceph: improve fscache revalidation
ceph: disable fscache when inode is opened for write
ceph: avoid unnecessary fscache invalidation/revlidation
ceph: call __fscache_uncache_page() if readpages fails
FS-Cache: make check_consistency callback return int
FS-Cache: wake write waiter after invalidating writes
libceph: use %s instead of %pE in dout()s
libceph: put request only if it's done in handle_reply()
libceph: change ceph_osdmap_flag() to take osdc
Linus Torvalds [Sat, 4 Jun 2016 18:26:49 +0000 (11:26 -0700)]
Merge tag 'acpi-4.7-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Two fixes for problems introduced recently (ACPICA and the ACPI
backlight driver) and one fix for an older issue that prevents at
least one system from booting.
Specifics:
- Fix an incorrect check introduced by recent ACPICA changes which
causes problems with booting KVM guests to happen, among other
things (Lv Zheng).
- Fix a backlight issue introduced by recent changes to the ACPI
video driver (Aaron Lu).
- Fix the ACPI processor initialization which attempts to register an
IO region without checking if that really is necessary and
sometimes prevents drivers loaded subsequently from registering
their resources which leads to boot issues (Rafael Wysocki)"
* tag 'acpi-4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Avoid reserving IO regions too early
ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width()
ACPI / Thermal / video: fix max_level incorrect value
Linus Torvalds [Sat, 4 Jun 2016 18:07:57 +0000 (11:07 -0700)]
Merge tag 'pm-4.7-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Two fixes for problems introduced recently in the cpufreq core and the
intel_pstate driver.
Specifics:
- Fix a silly mistake related to the clamp_val() usage in a function
added by a recent commit (Rafael Wysocki).
- Reduce the log level of an annoying message added to intel_pstate
during the recent merge window (Srinivas Pandruvada)"
* tag 'pm-4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Fix clamp_val() usage in cpufreq_driver_fast_switch()
cpufreq: intel_pstate: Downgrade print level for _PPC
Linus Torvalds [Sat, 4 Jun 2016 17:51:29 +0000 (10:51 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge various fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, page_alloc: recalculate the preferred zoneref if the context can ignore memory policies
mm, page_alloc: reset zonelist iterator after resetting fair zone allocation policy
mm, oom_reaper: do not use siglock in try_oom_reaper()
mm, page_alloc: prevent infinite loop in buffered_rmqueue()
checkpatch: reduce git commit description style false positives
mm/z3fold.c: avoid modifying HEADLESS page and minor cleanup
memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()
mm: check the return value of lookup_page_ext for all call sites
kdump: fix dmesg gdbmacro to work with record based printk
mm: fix overflow in vm_map_ram()
Linus Torvalds [Fri, 3 Jun 2016 23:12:35 +0000 (16:12 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- a few simple fixes for fallout from the recent gic-v3 changes
- a workaround for a Cavium thunderX erratum
- a bugfix for the pic32 irqchip to make external interrupts work proper
- a missing return value in the generic IPI management code
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-pic32-evic: Fix bug with external interrupts.
irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144
irqchip/gic-v3: Fix quiescence check in gic_enable_redist
irqchip/gic-v3: Fix copy+paste mistakes in defines
irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask
genirq: Fix missing return value in irq_destroy_ipi()
Mel Gorman [Fri, 3 Jun 2016 21:56:01 +0000 (14:56 -0700)]
mm, page_alloc: recalculate the preferred zoneref if the context can ignore memory policies
The optimistic fast path may use cpuset_current_mems_allowed instead of
of a NULL nodemask supplied by the caller for cpuset allocations. The
preferred zone is calculated on this basis for statistic purposes and as
a starting point in the zonelist iterator.
However, if the context can ignore memory policies due to being atomic
or being able to ignore watermarks then the starting point in the
zonelist iterator is no longer correct. This patch resets the zonelist
iterator in the allocator slowpath if the context can ignore memory
policies. This will alter the zone used for statistics but only after
it is known that it makes sense for that context. Resetting it before
entering the slowpath would potentially allow an ALLOC_CPUSET allocation
to be accounted for against the wrong zone. Note that while nodemask is
not explicitly set to the original nodemask, it would only have been
overwritten if cpuset_enabled() and it was reset before the slowpath was
entered.
Link: http://lkml.kernel.org/r/20160602103936.GU2527@techsingularity.net
Fixes: c33d6c06f60f710 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Fri, 3 Jun 2016 21:55:58 +0000 (14:55 -0700)]
mm, page_alloc: reset zonelist iterator after resetting fair zone allocation policy
Geert Uytterhoeven reported the following problem that bisected to
commit
c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone
in a zonelist twice") on m68k/ARAnyM
BUG: scheduling while atomic: cron/668/0x10c9a0c0
Modules linked in:
CPU: 0 PID: 668 Comm: cron Not tainted
4.6.0-atari-05133-gc33d6c06f60f710f #364
Call Trace: [<
0003d7d0>] __schedule_bug+0x40/0x54
__schedule+0x312/0x388
__schedule+0x0/0x388
prepare_to_wait+0x0/0x52
schedule+0x64/0x82
schedule_timeout+0xda/0x104
set_next_entity+0x18/0x40
pick_next_task_fair+0x78/0xda
io_schedule_timeout+0x36/0x4a
bit_wait_io+0x0/0x40
bit_wait_io+0x12/0x40
__wait_on_bit+0x46/0x76
wait_on_page_bit_killable+0x64/0x6c
bit_wait_io+0x0/0x40
wake_bit_function+0x0/0x4e
__lock_page_or_retry+0xde/0x124
do_scan_async+0x114/0x17c
lookup_swap_cache+0x24/0x4e
handle_mm_fault+0x626/0x7de
find_vma+0x0/0x66
down_read+0x0/0xe
wait_on_page_bit_killable_timeout+0x77/0x7c
find_vma+0x16/0x66
do_page_fault+0xe6/0x23a
res_func+0xa3c/0x141a
buserr_c+0x190/0x6d4
res_func+0xa3c/0x141a
buserr+0x20/0x28
res_func+0xa3c/0x141a
buserr+0x20/0x28
The relationship is not obvious but it's due to a failure to rescan the
full zonelist after the fair zone allocation policy exhausts the batch
count. While this is a functional problem, it's also a performance
issue. A page allocator microbenchmark showed the following
4.7.0-rc1 4.7.0-rc1
vanilla reset-v1r2
Min alloc-odr0-1 327.00 ( 0.00%) 326.00 ( 0.31%)
Min alloc-odr0-2 235.00 ( 0.00%) 235.00 ( 0.00%)
Min alloc-odr0-4 198.00 ( 0.00%) 198.00 ( 0.00%)
Min alloc-odr0-8 170.00 ( 0.00%) 170.00 ( 0.00%)
Min alloc-odr0-16 156.00 ( 0.00%) 156.00 ( 0.00%)
Min alloc-odr0-32 150.00 ( 0.00%) 150.00 ( 0.00%)
Min alloc-odr0-64 146.00 ( 0.00%) 146.00 ( 0.00%)
Min alloc-odr0-128 145.00 ( 0.00%) 145.00 ( 0.00%)
Min alloc-odr0-256 155.00 ( 0.00%) 155.00 ( 0.00%)
Min alloc-odr0-512 168.00 ( 0.00%) 165.00 ( 1.79%)
Min alloc-odr0-1024 175.00 ( 0.00%) 174.00 ( 0.57%)
Min alloc-odr0-2048 180.00 ( 0.00%) 180.00 ( 0.00%)
Min alloc-odr0-4096 187.00 ( 0.00%) 186.00 ( 0.53%)
Min alloc-odr0-8192 190.00 ( 0.00%) 190.00 ( 0.00%)
Min alloc-odr0-16384 191.00 ( 0.00%) 191.00 ( 0.00%)
Min alloc-odr1-1 736.00 ( 0.00%) 445.00 ( 39.54%)
Min alloc-odr1-2 343.00 ( 0.00%) 335.00 ( 2.33%)
Min alloc-odr1-4 277.00 ( 0.00%) 270.00 ( 2.53%)
Min alloc-odr1-8 238.00 ( 0.00%) 233.00 ( 2.10%)
Min alloc-odr1-16 224.00 ( 0.00%) 218.00 ( 2.68%)
Min alloc-odr1-32 210.00 ( 0.00%) 208.00 ( 0.95%)
Min alloc-odr1-64 207.00 ( 0.00%) 203.00 ( 1.93%)
Min alloc-odr1-128 276.00 ( 0.00%) 202.00 ( 26.81%)
Min alloc-odr1-256 206.00 ( 0.00%) 202.00 ( 1.94%)
Min alloc-odr1-512 207.00 ( 0.00%) 202.00 ( 2.42%)
Min alloc-odr1-1024 208.00 ( 0.00%) 205.00 ( 1.44%)
Min alloc-odr1-2048 213.00 ( 0.00%) 212.00 ( 0.47%)
Min alloc-odr1-4096 218.00 ( 0.00%) 216.00 ( 0.92%)
Min alloc-odr1-8192 341.00 ( 0.00%) 219.00 ( 35.78%)
Note that order-0 allocations are unaffected but higher orders get a
small boost from this patch and a large reduction in system CPU usage
overall as can be seen here:
4.7.0-rc1 4.7.0-rc1
vanilla reset-v1r2
User 85.32 86.31
System 2221.39 2053.36
Elapsed 2368.89 2202.47
Fixes: c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Link: http://lkml.kernel.org/r/20160531100848.GR2527@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 3 Jun 2016 21:55:55 +0000 (14:55 -0700)]
mm, oom_reaper: do not use siglock in try_oom_reaper()
Oleg has noted that siglock usage in try_oom_reaper is both pointless
and dangerous. signal_group_exit can be checked lockless. The problem
is that sighand becomes NULL in __exit_signal so we can crash.
Fixes: 3ef22dfff239 ("oom, oom_reaper: try to reap tasks which skip regular OOM killer path")
Link: http://lkml.kernel.org/r/1464679423-30218-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Fri, 3 Jun 2016 21:55:52 +0000 (14:55 -0700)]
mm, page_alloc: prevent infinite loop in buffered_rmqueue()
In DEBUG_VM kernel, we can hit infinite loop for order == 0 in
buffered_rmqueue() when check_new_pcp() returns 1, because the bad page
is never removed from the pcp list. Fix this by removing the page
before retrying. Also we don't need to check if page is non-NULL,
because we simply grab it from the list which was just tested for being
non-empty.
Fixes: 479f854a207c ("mm, page_alloc: defer debugging checks of pages allocated from the PCP")
Link: http://lkml.kernel.org/r/20160530090154.GM2527@techsingularity.net
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Fri, 3 Jun 2016 21:55:49 +0000 (14:55 -0700)]
checkpatch: reduce git commit description style false positives
Some lines in a commit log appear to be commit SHA1 ids like:
ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit
0123456789ab ("commit description")'
Link: http://lkml.kernel.org/r/40e03fd7aaf1f55c75d787128d6d17c5a71226c2.1464358556.git.vdavydov@virtuozzo.com
Reduce the false positives.
Link: http://lkml.kernel.org/r/eda977eaa8328fef42bb3c87935d97e10ea8ff67.1464384023.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vitaly Wool [Fri, 3 Jun 2016 21:55:47 +0000 (14:55 -0700)]
mm/z3fold.c: avoid modifying HEADLESS page and minor cleanup
Fix erroneous z3fold header access in a HEADLESS page in reclaim
function, and change one remaining direct handle-to-buddy conversion to
use the appropriate helper.
Link: http://lkml.kernel.org/r/5748706F.9020208@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Fri, 3 Jun 2016 21:55:44 +0000 (14:55 -0700)]
memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()
memcg_offline_kmem() may be called from memcg_free_kmem() after a css
init failure. memcg_free_kmem() is a ->css_free callback which is
called without cgroup_mutex and memcg_offline_kmem() ends up using
css_for_each_descendant_pre() without any locking. Fix it by adding rcu
read locking around it.
mkdir: cannot create directory `65530': No space left on device
===============================
[ INFO: suspicious RCU usage. ]
4.6.0-work+ #321 Not tainted
-------------------------------
kernel/cgroup.c:4008 cgroup_mutex or RCU read lock required!
[ 527.243970] other info that might help us debug this:
[ 527.244715]
rcu_scheduler_active = 1, debug_locks = 0
2 locks held by kworker/0:5/1664:
#0: ("cgroup_destroy"){.+.+..}, at: [<
ffffffff81060ab5>] process_one_work+0x165/0x4a0
#1: ((&css->destroy_work)#3){+.+...}, at: [<
ffffffff81060ab5>] process_one_work+0x165/0x4a0
[ 527.248098] stack backtrace:
CPU: 0 PID: 1664 Comm: kworker/0:5 Not tainted 4.6.0-work+ #321
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014
Workqueue: cgroup_destroy css_free_work_fn
Call Trace:
dump_stack+0x68/0xa1
lockdep_rcu_suspicious+0xd7/0x110
css_next_descendant_pre+0x7d/0xb0
memcg_offline_kmem.part.44+0x4a/0xc0
mem_cgroup_css_free+0x1ec/0x200
css_free_work_fn+0x49/0x5e0
process_one_work+0x1c5/0x4a0
worker_thread+0x49/0x490
kthread+0xea/0x100
ret_from_fork+0x1f/0x40
Link: http://lkml.kernel.org/r/20160526203018.GG23194@mtj.duckdns.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 3 Jun 2016 22:37:27 +0000 (15:37 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer bugfix from Thomas Gleixner:
"A single bugfix for the error check wreckage we introduced in the
merge window"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Make settimeofday error checking work again
Yang Shi [Fri, 3 Jun 2016 21:55:38 +0000 (14:55 -0700)]
mm: check the return value of lookup_page_ext for all call sites
Per the discussion with Joonsoo Kim [1], we need check the return value
of lookup_page_ext() for all call sites since it might return NULL in
some cases, although it is unlikely, i.e. memory hotplug.
Tested with ltp with "page_owner=0".
[1] http://lkml.kernel.org/r/
20160519002809.GA10245@js1304-P5Q-DELUXE
[akpm@linux-foundation.org: fix build-breaking typos]
[arnd@arndb.de: fix build problems from lookup_page_ext]
Link: http://lkml.kernel.org/r/6285269.2CksypHdYp@wuerfel
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1464023768-31025-1-git-send-email-yang.shi@linaro.org
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Corey Minyard [Fri, 3 Jun 2016 21:55:36 +0000 (14:55 -0700)]
kdump: fix dmesg gdbmacro to work with record based printk
Commit
7ff9554bb578 ("printk: convert byte-buffer to variable-length
record buffer") introduced a record based printk buffer. Modify
gdbmacros.txt to parse this new structure so dmesg will work properly.
Link: http://lkml.kernel.org/r/1463515794-1599-1-git-send-email-minyard@acm.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guillermo Julián Moreno [Fri, 3 Jun 2016 21:55:33 +0000 (14:55 -0700)]
mm: fix overflow in vm_map_ram()
When remapping pages accounting for 4G or more memory space, the
operation 'count << PAGE_SHIFT' overflows as it is performed on an
integer. Solution: cast before doing the bitshift.
[akpm@linux-foundation.org: fix vm_unmap_ram() also]
[akpm@linux-foundation.org: fix vmap() as well, per Guillermo]
Link: http://lkml.kernel.org/r/etPan.57175fb3.7a271c6b.2bd@naudit.es
Signed-off-by: Guillermo Julián Moreno <guillermo.julian@naudit.es>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 3 Jun 2016 21:39:29 +0000 (14:39 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"Just one fix to the ptrace code, spotted by Simon Marchi, where if a
thread migrates to a different CPU and the VFP registers are changed
through ptrace, the application doesn't see the updated VFP registers"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix PTRACE_SETVFPREGS on SMP systems
Linus Torvalds [Fri, 3 Jun 2016 21:29:47 +0000 (14:29 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main thing here is reviving hugetlb support using contiguous ptes,
which we ended up reverting at the last minute in 4.5 pending a fix
which went into the core mm/ code during the recent merge window.
- Revert a previous revert and get hugetlb going with contiguous hints
- Wire up missing compat syscalls
- Enable CONFIG_SET_MODULE_RONX by default
- Add missing line to our compat /proc/cpuinfo output
- Clarify levels in our page table dumps
- Fix booting with RANDOMIZE_TEXT_OFFSET enabled
- Misc fixes to the ARM CPU PMU driver (refcounting, probe failure)
- Remove some dead code and update a comment"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix alignment when RANDOMIZE_TEXT_OFFSET is enabled
arm64: move {PAGE,CONT}_SHIFT into Kconfig
arm64: mm: dump: log span level
arm64: update stale PAGE_OFFSET comment
drivers/perf: arm_pmu: Avoid leaking pmu->irq_affinity on error
drivers/perf: arm_pmu: Defer the setting of __oprofile_cpu_pmu
drivers/perf: arm_pmu: Fix reference count of a device_node in of_pmu_irq_cfg
arm64: report CPU number in bad_mode
arm64: unistd32.h: wire up missing syscalls for compat tasks
arm64: Provide "model name" in /proc/cpuinfo for PER_LINUX32 tasks
arm64: enable CONFIG_SET_MODULE_RONX by default
arm64: Remove orphaned __addr_ok() definition
Revert "arm64: hugetlb: partial revert of
66b3923a1a0f"
Linus Torvalds [Fri, 3 Jun 2016 21:20:22 +0000 (14:20 -0700)]
Merge tag 'powerpc-4.7-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Handle RTAS delay requests in configure_bridge from Russell Currey
- Refactor the configure_bridge RTAS tokens from Russell Currey
- Fix definition of SIAR and SDAR registers from Thomas Huth
- Use privileged SPR number for MMCR2 from Thomas Huth
- Update LPCR only if it is powernv from Aneesh Kumar K.V
- Fix the reference bit update when handling hash fault from Aneesh
Kumar K.V
- Add missing tlb flush from Aneesh Kumar K.V
- Add POWER8NVL support to ibm,client-architecture-support call from
Thomas Huth
* tag 'powerpc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call
powerpc/mm/radix: Add missing tlb flush
powerpc/mm/hash: Fix the reference bit update when handling hash fault
powerpc/mm/radix: Update LPCR only if it is powernv
powerpc: Use privileged SPR number for MMCR2
powerpc: Fix definition of SIAR and SDAR registers
powerpc/pseries/eeh: Refactor the configure_bridge RTAS tokens
powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge
Rafael J. Wysocki [Fri, 3 Jun 2016 20:35:05 +0000 (22:35 +0200)]
Merge branches 'acpica-fixes', 'acpi-video' and 'acpi-processor'
* acpica-fixes:
ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width()
* acpi-video:
ACPI / Thermal / video: fix max_level incorrect value
* acpi-processor:
ACPI / processor: Avoid reserving IO regions too early
Rafael J. Wysocki [Fri, 3 Jun 2016 20:34:18 +0000 (22:34 +0200)]
Merge branch 'pm-cpufreq-fixes'
* pm-cpufreq-fixes:
cpufreq: Fix clamp_val() usage in cpufreq_driver_fast_switch()
cpufreq: intel_pstate: Downgrade print level for _PPC
Chris Mason [Sat, 19 Sep 2015 18:28:25 +0000 (11:28 -0700)]
Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent
When dealing with inline extents, btrfs_get_extent will incorrectly try
to insert a duplicate extent_map. The dup hits -EEXIST from
add_extent_map, but then we try to merge with the existing one and end
up trying to insert a zero length extent_map.
This actually works most of the time, except when there are extent maps
past the end of the inline extent. rocksdb will trigger this sometimes
because it preallocates an extent and then truncates down.
Josef made a script to trigger with xfs_io:
#!/bin/bash
xfs_io -f -c "pwrite 0 1000" inline
xfs_io -c "falloc -k 4k 1M" inline
xfs_io -c "pread 0 1000" -c "fadvise -d 0 1000" -c "pread 0 1000" inline
xfs_io -c "fadvise -d 0 1000" inline
cat inline
You'll get EIOs trying to read inline after this because add_extent_map
is returning EEXIST
Signed-off-by: Chris Mason <clm@fb.com>
Thomas Gleixner [Fri, 3 Jun 2016 13:05:51 +0000 (15:05 +0200)]
Merge tag 'irqchip-4.7-rc1' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent
Merge irqchip updates from Marc Zyngier:
- A number of embarassing buglets (GICv3, PIC32)
- A more substential errata workaround for Cavium's GICv3 ITS
(kept for post-rc1 due to its dependency on NUMA)
Mark Rutland [Tue, 31 May 2016 14:58:00 +0000 (15:58 +0100)]
arm64: fix alignment when RANDOMIZE_TEXT_OFFSET is enabled
With ARM64_64K_PAGES and RANDOMIZE_TEXT_OFFSET enabled, we hit the
following issue on the boot:
kernel BUG at arch/arm64/mm/mmu.c:480!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0 #310
Hardware name: ARM Juno development board (r2) (DT)
task:
ffff000008d58a80 ti:
ffff000008d30000 task.ti:
ffff000008d30000
PC is at map_kernel_segment+0x44/0xb0
LR is at paging_init+0x84/0x5b0
pc : [<
ffff000008c450b4>] lr : [<
ffff000008c451a4>] pstate:
600002c5
Call trace:
[<
ffff000008c450b4>] map_kernel_segment+0x44/0xb0
[<
ffff000008c451a4>] paging_init+0x84/0x5b0
[<
ffff000008c42728>] setup_arch+0x198/0x534
[<
ffff000008c40848>] start_kernel+0x70/0x388
[<
ffff000008c401bc>] __primary_switched+0x30/0x74
Commit
7eb90f2ff7e3 ("arm64: cover the .head.text section in the .text
segment mapping") removed the alignment between the .head.text and .text
sections, and used the _text rather than the _stext interval for mapping
the .text segment.
Prior to this commit _stext was always section aligned and didn't cause
any issue even when RANDOMIZE_TEXT_OFFSET was enabled. Since that
alignment has been removed and _text is used to map the .text segment,
we need ensure _text is always page aligned when RANDOMIZE_TEXT_OFFSET
is enabled.
This patch adds logic to TEXT_OFFSET fuzzing to ensure that the offset
is always aligned to the kernel page size. To ensure this, we rely on
the PAGE_SHIFT being available via Kconfig.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 7eb90f2ff7e3 ("arm64: cover the .head.text section in the .text segment mapping")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Mark Rutland [Tue, 31 May 2016 14:57:59 +0000 (15:57 +0100)]
arm64: move {PAGE,CONT}_SHIFT into Kconfig
In some cases (e.g. the awk for CONFIG_RANDOMIZE_TEXT_OFFSET) we would
like to make use of PAGE_SHIFT outside of code that can include the
usual header files.
Add a new CONFIG_ARM64_PAGE_SHIFT for this, likewise with
ARM64_CONT_SHIFT for consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Mark Rutland [Tue, 31 May 2016 13:49:02 +0000 (14:49 +0100)]
arm64: mm: dump: log span level
The page table dump code logs spans of entries at the same level
(pgd/pud/pmd/pte) which have the same attributes. While we log the
(decoded) attributes, we don't log the level, which leaves the output
ambiguous and/or confusing in some cases.
For example:
0xffff800800000000-0xffff800980000000 6G RW NX SHD AF BLK UXN MEM/NORMAL
If using 4K pages, this may describe a span of 6 1G block entries at the
PGD/PUD level, or 3072 2M block entries at the PMD level.
This patch adds the page table level to each output line, removing this
ambiguity. For the example above, this will produce:
0xffffffc800000000-0xffffffc980000000 6G PUD RW NX SHD AF BLK UXN MEM/NORMAL
When 3 level tables are in use, and we use the asm-generic/nopud.h
definitions, the dump code treats each entry in the PGD as a 1 element
table at the PUD level, and logs spans as being PUDs, which can be
confusing. To counteract this, the "PUD" mnemonic is replaced with "PGD"
when CONFIG_PGTABLE_LEVELS <= 3. Likewise for "PMD" when
CONFIG_PGTABLE_LEVELS <= 2.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Huang Shijie <shijie.huang@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Mark Rutland [Wed, 1 Jun 2016 11:07:17 +0000 (12:07 +0100)]
arm64: update stale PAGE_OFFSET comment
Commit
ab893fb9f1b17f02 ("arm64: introduce KIMAGE_VADDR as the virtual
base of the kernel region") logically split KIMAGE_VADDR from
PAGE_OFFSET, and since commit
f9040773b7bbbd9e ("arm64: move kernel
image to base of vmalloc area") the two have been distinct values.
Unfortunately, neither commit updated the comment above these
definitions, which now erroneously states that PAGE_OFFSET is the start
of the kernel image rather than the start of the linear mapping.
This patch fixes said comment, and introduces an explanation of
KIMAGE_VADDR.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Julien Grall [Tue, 31 May 2016 11:41:23 +0000 (12:41 +0100)]
drivers/perf: arm_pmu: Avoid leaking pmu->irq_affinity on error
pmu->irq_affinity will not be freed if an error occurred within
arm_pmu_device_probe after of_pmu_irq_cfg has been called.
Note that in the case of_pmu_irq_cfg is returning an error,
pmu->irq_affinity will not be set, but it should be NULL as pmu was
kzalloc'd. Therefore the result kfree(NULL) is benign.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Julien Grall [Tue, 31 May 2016 11:41:22 +0000 (12:41 +0100)]
drivers/perf: arm_pmu: Defer the setting of __oprofile_cpu_pmu
The global variable __oprofile_cpu_pmu is set before the PMU is fully
initialized. If an error occurs before the end of the initialization,
the PMU will be freed and the variable will contain an invalid pointer.
This will result in a kernel crash when perf will be used.
Fix it by moving the setting of __oprofile_cpu_pmu when the PMU is fully
initialized (i.e when it is no longer possible to fail).
Cc: <stable@vger.kernel.org>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Julien Grall [Tue, 31 May 2016 11:41:21 +0000 (12:41 +0100)]
drivers/perf: arm_pmu: Fix reference count of a device_node in of_pmu_irq_cfg
The only function called by of_pmu_irq_cfg that will increment the
reference count on dn is of_parse_phandle.
Each time we successfully parse a possible CPU from an
interrupt-affinity property, we increment the refcount of that CPU node
once via of_parse_handle. After validating the CPU is possible, we
decrement the refcount once. Subsequently, we decrement the refcount
again, either as part of an early break if we don't have a matching SPI,
or as part of the end of the loop body.
This will lead to decrementing twice the refcounnt.
Remove the second pairs of call to of_node_put as nobody is using dn
between the first and second call to of_node_put.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Mark Rutland [Tue, 31 May 2016 11:07:47 +0000 (12:07 +0100)]
arm64: report CPU number in bad_mode
If we take an exception we don't expect (e.g. SError), we report this in
the bad_mode handler with pr_crit. Depending on the configured log
level, we may or may not log additional information in functions called
subsequently. Notably, the messages in dump_stack (including the CPU
number) are printed with KERN_DEFAULT and may not appear.
Some exceptions have an IMPLEMENTATION DEFINED ESR_ELx.ISS encoding, and
knowing the CPU number is crucial to correctly decode them. To ensure
that this is always possible, we should log the CPU number along with
the ESR_ELx value, so we are not reliant on subsequent logs or
additional printk configuration options.
This patch logs the CPU number in bad_mode such that it is possible for
a developer to decode these exceptions, provided access to sufficient
documentation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Al Grant <Al.Grant@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Stephan Mueller [Thu, 26 May 2016 21:38:12 +0000 (23:38 +0200)]
KEYS: Add placeholder for KDF usage with DH
The values computed during Diffie-Hellman key exchange are often used
in combination with key derivation functions to create cryptographic
keys. Add a placeholder for a later implementation to configure a
key derivation function that will transform the Diffie-Hellman
result returned by the KEYCTL_DH_COMPUTE command.
[This patch was stripped down from a patch produced by Mat Martineau that
had a bug in the compat code - so for the moment Stephan's patch simply
requires that the placeholder argument must be NULL]
Original-signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Oded Gabbay [Sun, 29 May 2016 05:21:53 +0000 (08:21 +0300)]
drm/amdkfd: print once about mem_banks truncation
This print can really spam the kernel log in case we are truncating
mem_banks, so just print this info once. It should also not be classified
as warning.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Thu, 26 May 2016 05:41:48 +0000 (08:41 +0300)]
drm/amdkfd: destroy dbgmgr in notifier release
amdkfd need to destroy the debug manager in case amdkfd's notifier
function is called before the unbind function, because in that case,
the unbind function will exit without destroying debug manager.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
CC: Stable <stable@vger.kernel.org>
Oded Gabbay [Thu, 26 May 2016 05:41:08 +0000 (08:41 +0300)]
drm/amdkfd: unbind only existing processes
When unbinding a process from a device (initiated by amd_iommu_v2), the
driver needs to make sure that process still exists in the process table.
There is a possibility that amdkfd's own notifier handler -
kfd_process_notifier_release() - was called before the unbind function
and it already removed the process from the process table.
v2:
Because there can be only one process with the specified pasid, and
because *p can't be NULL inside the hash_for_each_rcu macro, it is more
reasonable to just put the whole code inside the if statement that
compares the pasid value. That way, when we exit hash_for_each_rcu, we
simply exit the function as well.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
CC: Stable <stable@vger.kernel.org>
Dave Airlie [Fri, 3 Jun 2016 04:39:41 +0000 (14:39 +1000)]
drm/omap: fix unused variable warning.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 3 Jun 2016 04:35:00 +0000 (14:35 +1000)]
Merge tag 'omapdrm-4.7-fixes' of git://git./linux/kernel/git/tomba/linux into drm-fixes
omapdrm fixes for 4.7
* multiple compile break fixes for missing includes, bad kconfig dependencies.
* remove regulator API misuse causing deprecation warnings
* OMAP5 HDMI fixes for DDC and AVI infoframe
* OMAP4 HDMI fix for CEC
* tag 'omapdrm-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
drm/omap: include gpio/consumer.h where needed
drm/omap: include linux/seq_file.h where needed
Revert "drm/omap: no need to select OMAP2_DSS"
drm/omap: Remove regulator API abuse
OMAPDSS: HDMI5: Change DDC timings
OMAPDSS: HDMI5: Fix AVI infoframe
drm/omap: fix OMAP4 hdmi_core_powerdown_disable()
drm/omap: Fix missing includes
drm/omapdrm: include pinctrl/consumer.h where needed
Dave Airlie [Fri, 3 Jun 2016 04:11:49 +0000 (14:11 +1000)]
Merge tag 'imx-drm-next-2016-06-01' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm updates
- add support for reading LVDS panel EDID over DDC
- enable UYVY/VYUY support
- add support for pixel clock polarity configuration
- honor the native-mode DT property for LVDS
- various fixes and cleanups
* tag 'imx-drm-next-2016-06-01' of git://git.pengutronix.de/git/pza/linux:
drm/imx: plane: Don't set plane->crtc in ipu_plane_update()
drm/imx: ipuv3-plane: Constify ipu_plane_funcs
drm/imx: imx-ldb: honor 'native-mode' property when selecting video mode from DT
drm/imx: parallel-display: remove dead code
drm/imx: use bus_flags for pixel clock polarity
drm/imx: ipuv3-plane: enable UYVY and VYUY formats
drm/imx: parallel-display: use of_graph_get_endpoint_by_regs helper
drm/imx: imx-ldb: use of_graph_get_endpoint_by_regs helper
dt-bindings: imx: ldb: Add ddc-i2c-bus property
drm/imx: imx-ldb: Add DDC support
projects / openwrt / staging / blogic.git / log