fix cyclades.h for x86_64 (and probably others)

At least on x86_64 the present cyclades.h is broken due to the wrong size
of uclong.  This affects, of course, both the kernel and the user-level
utilities.  The symptom is that cyzload refuses to load the firmware.  I
also managed to freeze the machine when unloading the module.

The patch below fixes this in an architecture-independent way.  I have
tested it with 2.6.19 and the driver works fine again with a Cyclades-Z on
an Athlon 64 X2.

[akpm@linux-foundation.org: fix warnings]

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kprobes: Make kprobe.symbol_name const

Kprobes doesn't scribble the kprobe.symbol_name field.  Its only set by the
module when registering the probe.  Modules that exercise good hygiene
using the "const" qualifier will see warnings...

warning: assignment discards qualifiers from pointer target type

Make struct kprobe.symbol_name const char *

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: i386/x86_64 arbitary speed support

Adds the needed TCGETS2/TCSETS2 ioctl calls, structures, defines and the like.
Tested against the test suite and passes.  Other platforms should need
roughly the same change.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

VFS: delay the dentry name generation on sockets and pipes

1) Introduces a new method in 'struct dentry_operations'.  This method
   called d_dname() might be called from d_path() to build a pathname for
   special filesystems.  It is called without locks.

   Future patches (if we succeed in having one common dentry for all
   pipes/sockets) may need to change prototype of this method, but we now
   use : char *d_dname(struct dentry *dentry, char *buffer, int buflen);

2) Adds a dynamic_dname() helper function that eases d_dname() implementations

3) Defines d_dname method for sockets : No more sprintf() at socket
   creation.  This is delayed up to the moment someone does an access to
   /proc/pid/fd/...

4) Defines d_dname method for pipes : No more sprintf() at pipe
   creation.  This is delayed up to the moment someone does an access to
   /proc/pid/fd/...

A benchmark consisting of 1.000.000 calls to pipe()/close()/close() gives a
*nice* speedup on my Pentium(M) 1.6 Ghz :

3.090 s instead of 3.450 s

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

add file position info to proc

Add support for finding out the current file position, open flags and
possibly other info in the future.

These new entries are added:

  /proc/PID/fdinfo/FD
  /proc/PID/task/TID/fdinfo/FD

For each fd the information is provided in the following format:

pos: 1234
flags: 0100002

[bunk@stusta.de: make struct proc_fdinfo_file_operations static]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs: reorder struct pid_dentry to save space on 64bit archs, and constify them

Change the order of fields of struct pid_entry (file fs/proc/base.c) in order
to avoid a hole on 64bit archs.  (8 bytes saved per object)

Also change all pid_entry arrays to be const qualified, to make clear they
must not be modified.

Before (on x86_64) :

# size fs/proc/base.o
   text    data     bss     dec     hex filename
  15549    2192       0   17741    454d fs/proc/base.o

After :

# size fs/proc/base.o
   text    data     bss     dec     hex filename
  17229     176       0   17405    43fd fs/proc/base.o

Thats 336 bytes saved on kernel size on x86_64

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/synclink.c: check kmalloc() return value

Signed-off-by: Amit Choudhary <amit2030@gmail.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove unused header file: drivers/char/digi.h

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove unused header file: drivers/message/i2o/i2o_lan.h

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: maps protection

The /proc/pid/ "maps", "smaps", and "numa_maps" files contain sensitive
information about the memory location and usage of processes.  Issues:

- maps should not be world-readable, especially if programs expect any
  kind of ASLR protection from local attackers.
- maps cannot just be 0400 because "-D_FORTIFY_SOURCE=2 -O2" makes glibc
  check the maps when %n is in a *printf call, and a setuid(getuid())
  process wouldn't be able to read its own maps file.  (For reference
  see http://lkml.org/lkml/2006/1/22/150)
- a system-wide toggle is needed to allow prior behavior in the case of
  non-root applications that depend on access to the maps contents.

This change implements a check using "ptrace_may_attach" before allowing
access to read the maps contents.  To control this protection, the new knob
/proc/sys/kernel/maps_protect has been added, with corresponding updates to
the procfs documentation.

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: New sysctl numbers are old hat]
Signed-off-by: Kees Cook <kees@outflux.net>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

virtual_eisa_root_init() should be __init

WARNING: vmlinux - Section mismatch: reference to
.init.text:eisa_root_register from .text between 'virtual_eisa_root_init' (at
offset 0xc026b80f) and 'cpufreq_debug_disable_ratelimit'

Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rocket: remove modversions include

It misspelled "MODVERSIONS" preprocessor variable with "CONFIG_MODVERSIONS".
Just kill it all.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

floppy: handle device_create_file() failure while init

This patch kills the "ignoring return value of 'device_create_file'"
warning message.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

replace pci_find_device in drivers/telephony/ixj.c

Cleaning up of pci_find_device in drivers/telephony/ixj.c.

Signed-off-by: Surya Prabhakar <surya.prabhakar@wipro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tpm_infineon: add support for devices in mmio space

tAdd adds support for devices living in MMIO space to the Infineon TPM
driver.  These can be found on some of the newer HP ia64 systems.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Acked-by: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

namei.c: remove utterly outdated comment

We don't have a routine called namei() anymore since at least 2.3.x, and
the comment is just totally out of sync with the current lookup logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: remove superflous sb == NULL checks

inode->i_sb is always set, not need to check for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: remove pathetic ->deleted WARN_ON

WARN_ON(de && de->deleted); is sooo unreliable. Why?

proc_lookup remove_proc_entry
=========== =================
lock_kernel();
spin_lock(&proc_subdir_lock);
[find proc entry]
spin_unlock(&proc_subdir_lock);
spin_lock(&proc_subdir_lock);
[find proc entry]

proc_get_inode
==============
WARN_ON(de && de->deleted); ...

if (!atomic_read(&de->count))
free_proc_entry(de);
else
de->deleted = 1;

So, if you have some strange oops [1], and doesn't see this WARN_ON it means
nothing.

[1] try_module_get() of module which doesn't exist, two lines below
    should suffice, or not?

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix race between proc_readdir and remove_proc_entry

Fix the following race:

proc_readdir remove_proc_entry
============ =================

spin_lock(&proc_subdir_lock);
[choose PDE to start filldir from]
spin_unlock(&proc_subdir_lock);
spin_lock(&proc_subdir_lock);
[find PDE]
[free PDE, refcount is 0]
spin_unlock(&proc_subdir_lock);
    /* boom */
if (filldir(dirent, de->name, ...

[de_put on error path --adobriyan]
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix race between proc_get_inode() and remove_proc_entry()

proc_lookup remove_proc_entry
=========== =================

lock_kernel();
spin_lock(&proc_subdir_lock);
[find PDE with refcount 0]
spin_unlock(&proc_subdir_lock);
spin_lock(&proc_subdir_lock);
[find PDE with refcount 0]
[check refcount and free PDE]
spin_unlock(&proc_subdir_lock);
proc_get_inode:
de_get(de); /* boom */

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

add filesystem subtype support

There's a slight problem with filesystem type representation in fuse
based filesystems.

From the kernel's view, there are just two filesystem types: fuse and
fuseblk.  From the user's view there are lots of different filesystem
types.  The user is not even much concerned if the filesystem is fuse based
or not.  So there's a conflict of interest in how this should be
represented in fstab, mtab and /proc/mounts.

The current scheme is to encode the real filesystem type in the mount
source.  So an sshfs mount looks like this:

  sshfs#user@server:/   /mnt/server    fuse   rw,nosuid,nodev,...

This url-ish syntax works OK for sshfs and similar filesystems.  However
for block device based filesystems (ntfs-3g, zfs) it doesn't work, since
the kernel expects the mount source to be a real device name.

A possibly better scheme would be to encode the real type in the type
field as "type.subtype".  So fuse mounts would look like this:

  /dev/hda1       /mnt/windows   fuseblk.ntfs-3g   rw,...
  user@server:/   /mnt/server    fuse.sshfs        rw,nosuid,nodev,...

This patch adds the necessary code to the kernel so that this can be
correctly displayed in /proc/mounts.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oss: strlcpy is smart enough

strlcpy already accounts for the trailing zero in its length
computation, so there is no need to substract one to the buffer size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epoll: optimizations and cleanups

Epoll is doing multiple passes over the ready set at the moment, because of
the constraints over the f_op->poll() call.  Looking at the code again, I
noticed that we already hold the epoll semaphore in read, and this
(together with other locking conditions that hold while doing an
epoll_wait()) can lead to a smarter way [1] to "ship" events to userspace
(in a single pass).

This is a stress application that can be used to test the new code.  It
spwans multiple thread and call epoll_wait() and epoll_ctl() from many
threads.  Stress tested on my dual Opteron 254 w/out any problems.

http://www.xmailserver.org/totalmess.c

This is not a benchmark, just something that tries to stress and exploit
possible problems with the new code.
Also, I made a stupid micro-benchmark:

http://www.xmailserver.org/epwbench.c

[1] Considering that epoll must be thread-safe, there are five ways we can
    be hit during an epoll_wait() transfer loop (ep_send_events()):

    1) The epoll fd going away and calling ep_free
       This just can't happen, since we did an fget() in sys_epoll_wait

    2) An epoll_ctl(EPOLL_CTL_DEL)
       This can't happen because epoll_ctl() gets ep->sem in write, and
       we're holding it in read during ep_send_events()

    3) An fd stored inside the epoll fd going away
       This can't happen because in eventpoll_release_file() we get
       ep->sem in write, and we're holding it in read during
       ep_send_events()

    4) Another epoll_wait() happening on another thread
       They both can be inside ep_send_events() at the same time, we get
       (splice) the ready-list under the spinlock, so each one will get
       its own ready list. Note that an fd cannot be at the same time
       inside more than one ready list, because ep_poll_callback() will
       not re-queue it if it sees it already linked:

       if (ep_is_linked(&epi->rdllink))
                goto is_linked;

       Another case that can happen, is two concurrent epoll_wait(),
       coming in with a userspace event buffer of size, say, ten.
       Suppose there are 50 event ready in the list. The first
       epoll_wait() will "steal" the whole list, while the second, seeing
       no events, will go to sleep. But at the end of ep_send_events() in
       the first epoll_wait(), we will re-inject surplus ready fds, and we
       will trigger the proper wake_up to the second epoll_wait().

    5) ep_poll_callback() hitting us asyncronously
       This is the tricky part. As I said above, the ep_is_linked() test
       done inside ep_poll_callback(), will guarantee us that until the
       item will result linked to a list, ep_poll_callback() will not try
       to re-queue it again (read, write data on any of its members). When
       we do a list_del() in ep_send_events(), the item will still satisfy
       the ep_is_linked() test (whatever data is written in prev/next,
       it'll never be its own pointer), so ep_poll_callback() will still
       leave us alone. It's only after the eventual smp_mb()+INIT_LIST_HEAD(&epi->rdllink)
       that it'll become visible to ep_poll_callback(), but at the point
       we're already past it.

[akpm@osdl.org: 80 cols]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

the scheduled removal of OBSOLETE_OSS options

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext3: dirindex error pointer issues

- ext3_dx_find_entry() exit with out setting proper error pointer

- do_split() exit with out setting proper error pointer
  it is realy painful because many callers contain folowing code:

          de = do_split(handle,dir, &bh, frame, &hinfo, &retval);
          if (!(de))
                       return retval;
          <<< WOW retval wasn't changed by do_split(), so caller failed
          <<< but return SUCCESS :)

- Rearrange do_split() error path. Current error path is realy ugly, all
  this up and down jump stuff doesn't make code easy to understand.

[dmonakhov@sw.ru: fix annoying fake error messages]
Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Optimize timespec_trunc()

The first thing done by timespec_trunc() is :

  if (gran <= jiffies_to_usecs(1) * 1000)

This should really be a test against a constant known at compile time.

Alas, it isnt. jiffies_to_usec() was unilined so C compiler emits a function
call and a multiply to compute : a CONSTANT.

mov    $0x1,%edi
mov    %rbx,0xffffffffffffffe8(%rbp)
mov    %r12,0xfffffffffffffff0(%rbp)
mov    %edx,%ebx
mov    %rsi,0xffffffffffffffc8(%rbp)
mov    %rsi,%r12
callq  ffffffff80232010 <jiffies_to_usecs>
imul   $0x3e8,%eax,%eax
cmp    %ebx,%eax

This patch reorders kernel/time.c a bit so that jiffies_to_usecs() is defined
before timespec_trunc() so that compiler now generates :

cmp    $0x3d0900,%edx  (HZ=250 on my machine)

This gives a better code (timespec_trunc() becoming a leaf function), and
shorter kernel size as well.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init dma masks in pnp_dev

PNP now initializes device dma masks, which prevents oopses when generic
dma calls are made using pnp device nodes.

This assumes PNP only uses ISA DMA, with 24 bit addresses; and that it's
safe to init those masks for all devices (rather than finding out which
devices have been assigned DMA channels, and handling only those).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Adam Belay <abelay@novell.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rcutorture: Mark rcu_torture_init as __init

The corresponding rcu_torture_cleanup cannot get marked as __exit, because
rcu_torture_init uses it to clean up if init fails.

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge sys_clone()/sys_unshare() nsproxy and namespace handling

sys_clone() and sys_unshare() both makes copies of nsproxy and its associated
namespaces.  But they have different code paths.

This patch merges all the nsproxy and its associated namespace copy/clone
handling (as much as possible).  Posted on container list earlier for
feedback.

- Create a new nsproxy and its associated namespaces and pass it back to
  caller to attach it to right process.

- Changed all copy_*_ns() routines to return a new copy of namespace
  instead of attaching it to task->nsproxy.

- Moved the CAP_SYS_ADMIN checks out of copy_*_ns() routines.

- Removed unnessary !ns checks from copy_*_ns() and added BUG_ON()
  just incase.

- Get rid of all individual unshare_*_ns() routines and make use of
  copy_*_ns() instead.

[akpm@osdl.org: cleanups, warning fix]
[clg@fr.ibm.com: remove dup_namespaces() declaration]
[serue@us.ibm.com: fix CONFIG_IPC_NS=n, clone(CLONE_NEWIPC) retval]
[akpm@linux-foundation.org: fix build with CONFIG_SYSVIPC=n]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <containers@lists.osdl.org>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: fix remove_arg_zero

Petr Tesarik discovered a problem in remove_arg_zero(). He writes:

 When a script is loaded, load_script() replaces argv[0] with the
 name of the interpreter and the filename passed to the exec syscall.
 However, there is no guarantee that the length of the interpreter
 name plus the length of the filename is greater than the length of
 the original argv[0]. If the difference happens to cross a page boundary,
 setup_arg_pages() will call put_dirty_page() [aka install_arg_page()]
 with an address outside the VMA.

 Therefore, remove_arg_zero() must free all pages which would be unused
 after the argument is removed.

So, rewrite the remove_arg_zero function without gotos, with a few comments,
and with the commonly used explicit index/offset. This fixes the problem
and makes it easier to understand as well.

[a.p.zijlstra@chello.nl: add comment]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Cap shmmax at INT_MAX in compat shminfo

The value of shmmax may be larger than will fit in the struct used by
the 32bit compat version of sys_shmctl. This change mirrors what the
normal sys_shmctl does when called with the old IPC_INFO command.

Signed-off-by: Guy Streeter <streeter@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use stop_machine_run in the Intel RNG driver

Replace call_smp_function with stop_machine_run in the Intel RNG driver.

CPU A has done read_lock(&lock)
CPU B has done write_lock_irq(&lock) and is waiting for A to release the lock.

A third CPU calls call_smp_function and issues the IPI.  CPU A takes CPU
C's IPI.  CPU B is waiting with interrupts disabled and does not see the
IPI.  CPU C is stuck waiting for CPU B to respond to the IPI.

Deadlock.

The solution is to use stop_machine_run instead of call_smp_function
(call_smp_function should not be called in situations where the CPUs may be
suspended).

[haruo.tomita@toshiba.co.jp: fix a typo in mod_init()]
[haruo.tomita@toshiba.co.jp: fix memory leak]
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: "Tomita, Haruo" <haruo.tomita@toshiba.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IRQ: add __must_check to request_irq

This could help to find buggy drivers where request_irq return value wasn't
checked.  There's just no reason to ignore errors which can and do occur.
Anyone who got warning during compilation have to realise what it is't
realy safe code.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kconfig: centralize the selection of semaphore debugging in lib/Kconfig.debug

Remove the Kconfig selection of semaphore debugging from the ALPHA and FRV
Kconfig files, and centralize it in lib/Kconfig.debug.

There doesn't seem to be much point in letting individual architectures
independently define the same Kconfig option when it can just as easily be
put in a single Kconfig file and made dependent on a subset of
architectures.  that way, at least the option shows up in the same relative
location in the menu each time.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reiserfs: correct misspelled "REISERFS_PROC_INFO" to "CONFIG_REISERFS_PROC_INFO"

Correct the misspelling of the preprocessor check of a Kconfig option to refer
to CONFIG_REISERFS_PROC_INFO and not just the incorrect REISERFS_PROC_INFO.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

module: use krealloc

This converts an open-coded krealloc() to use the shiny new API.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reiserfs: shrink superblock if no xattrs

This makes in-core superblock fit into one cacheline here.

Before:
    struct dentry *            xattr_root;           /*   124     4 */
    /* --- cacheline 1 boundary (128 bytes) --- */
    struct rw_semaphore        xattr_dir_sem;        /*   128    12 */
    int                        j_errno;              /*   140     4 */
    }; /* size: 144, cachelines: 2 */
       /* sum members: 142, holes: 1, sum holes: 2 */
       /* last cacheline: 16 bytes */

After:
    int                        j_errno;              /*   124     4 */
    /* --- cacheline 1 boundary (128 bytes) --- */
    }; /* size: 128, cachelines: 1 */
       /* sum members: 126, holes: 1, sum holes: 2 */

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Apple SMC driver (hardware monitoring and control)

This driver provides support for the Apple System Management Controller, which
provides an accelerometer (Apple Sudden Motion Sensor), light sensors,
temperature sensors, keyboard backlight control and fan control. Only
Intel-based Apple's computers are supported (MacBook Pro, MacBook, MacMini).

[bunk@stusta.de: make drivers/hwmon/applesmc.c:backlight_work stati]
[khali@linux-fr.org: fix temperature attribute file names]
Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix compilation of drivers with -O0

It is sometimes useful to compile individual drivers with optimization
disabled for easier debugging.  Currently drivers which use htonl() and
similar functions don't compile with -O0.  This patch fixes it.  It also
removes obsolete and misleading comments.  This header is not for
userspace, so we don't have to care about strange programs these comments
mention.

(akpm: -O0 probably isn't a good idea, but this code looks pretty crufty and
unuseful)

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/do_mounts.c: proper prepare_namespace() prototype

Add a proper protype for prepare_namespace() in include/linux/init.h.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix section mismatch warning in lib/swiotlb.c

kbuild spits outs following warning on a
defconfig x86_64 build:
WARNING: swiotlb.o - Section mismatch: reference to .init.text:swiotlb_init from __ksymtab between '__ksymtab_swiotlb_init' (at offset 0xa0) and '__ksymtab_swiotlb_free_coherent'

This warning happens because the function swiotlb_init is marked __init and
EXPORT_SYMBOL().  A 'git grep swiotlb_init' showed no users in drivers/ so
remove the EXPORT_SYMBOL.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts: kernel-doc whitespace cleanup

Whitespace cleanup only:  convert some series of spaces to tabs.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reiserfs: possible null pointer dereference during resize

sb_read may return NULL, let's explicitly check it.  If so free new bitmap
blocks array, after this we may safely exit as it done above during bitmap
allocation.

Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

freevxfs: possible null pointer dereference fix

sb_read may return NULL, so let's explicitly check it.

Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

is_power_of_2 in fs/block_dev.c

Replace (n & (n-1)) in the context of power of 2 checks with is_power_of_2

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

is_power_of_2 in fs/hfs

Replace (n & (n-1)) in the context of power of 2 checks with is_power_of_2

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

is_power_of_2 in fat

Replacing (n & (n-1)) in the context of power of 2 checks with
is_power_of_2

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/hvc_console.c: cleanups

- make needlessly global code static
- remove the unused EXPORT_SYMBOL's

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: Clarify documentation of ->write()

The tty driver write method is different to the usual fops device write
methods as the buffer is already in kernel space. Clarify the docs since
someone writing a driver made that mistake.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

devpts: add fsnotify create event

Currently, devpts doesn't generate an fsnotify event upon pts creation
because the regular vfs paths aren't involved.  Deallocation, on the other
hand, correctly generates a nameremove event thanks to the d_delete()
invocation in devpts_pty_kill().

This patch adds the missing fsnotify_create() trigger in devpts_pty_new().

Signed-off-by: Florin Malita <fmalita@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

use use SEEK_MAX to validate user lseek arguments

Add SEEK_MAX and use it to validate lseek arguments from userspace.

Signed-off-by: Chris Snook <csnook@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

use symbolic constants in generic lseek code

Convert magic numbers to SEEK_* values from fs.h

Signed-off-by: Chris Snook <csnook@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: Ask driver writers to provide PM support

Add a paragraph in Documentation/SubmittingDrivers requesting that the
basic PM support be provided by new device drivers.

Add two new documents in Documentation/power/ giving general instructions
on debugging the suspend/resume functionality and testing the suspend and
resume support in device drivers.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: David Brownell <david-b@pacbell.net>
Cc: Nigel Cunningham <ncunningham@linuxmail.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix constant folding and poor optimization in byte swapping code

Constant folding does not work for the swabXX() byte swapping functions,
and the C versions optimize poorly.

Attempting to initialize a global variable to swab16(0x1234) or put
something like "case swab32(42):" in a switch statement will not compile.
It can work, swab.h just isn't doing it correctly.  This patch fixes that.

Contrary to the comment in asm-i386/byteorder.h, gcc does not recognize the
"C" version of swab16 and turn it into efficient code.  gcc can do this,
just not with the current code.  The simple function:

u16 foo(u16 x) { return swab16(x); }

Would compile to:
        movzwl  %ax, %eax
        movl    %eax, %edx
        shrl    $8, %eax
        sall    $8, %edx
        orl     %eax, %edx

With this patch, it will compile to:
        rolw    $8, %ax

I also attempted to document the maze different macros/inline functions
that are used to create the final product.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Cc: Francois-Rene Rideau <fare@tunes.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

softlockup: s/99/MAX_RT_PRIO/

Don't use hardcoded 99 value, use MAX_RT_PRIO.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

freezer: task->exit_state should be treated as bolean

Except for BUG_ON() checks, we should not use EXIT_XXXX defines outside of
exit/wait paths.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipmi: add pci remove handling

Add pci_remove handling to the driver, so it will clean up if
the device is hot-removed.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipmi: add new IPMI nmi watchdog handling

Convert over to the new NMI handling for getting IPMI watchdog timeouts via an
NMI.  This add config options to know if there is the ability to receive NMIs
and if it has an NMI post processing call.  Then it modifies the IPMI watchdog
to take advantage of this so that it can know if an NMI comes in.

It also adds testing that the IPMI NMI watchdog works.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipmi: allow shared interrupts

The IPMI driver used enable_irq and disable_irq when it got into situations
where it couldn't allocate memory; it did this to avoid having the interrupt
just lock the machine when it couldn't get memory to perform the transaction
to disable the interrupt.

This patch modifies the driver to not use disable_irq and enable_irq.  It
instead sends the messages to the BMC to perform this operation.  It also
makes sure interrupts are cleanly disabled when the interface is shut down and
cleans up some shutdown things that are no longer necessary.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipmi: add powerpc openfirmware sensing

Add support for of_platform_driver to the ipmi_si module.  When loading the
module, the driver will be registered to of_platform.  The driver will be
probed for all devices with the type ipmi.  It's supporting devices with
compatible settings ipmi-kcs, ipmi-smic and ipmi-bt.  Only ipmi-kcs could be
tested.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Acked-by: Heiko J Schick <schihei@de.ibm.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: shrink parent dentries when shrinking slab

Teach the dentry slab shrinker to aggressively shrink parent dentries when
shrinking the dentry cache.

This is done to attempt to improve the situation where the dentry slab cache
gets a lot of internal fragmentation due to pages containing directory
dentries.  It is expected that this change will cause some of those dentries
to be reaped earlier, and with less scanning.

Needs careful testing.

Cc: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix quadratic behavior of shrink_dcache_parent()

The time shrink_dcache_parent() takes, grows quadratically with the depth
of the tree under 'parent'.  This starts to get noticable at about 10,000.

These kinds of depths don't occur normally, and filesystems which invoke
shrink_dcache_parent() via d_invalidate() seem to have other depth
dependent timings, so it's not even easy to expose this problem.

However with FUSE it's easy to create a deep tree and d_invalidate()
will also get called.  This can make a syscall hang for a very long
time.

This is the original discovery of the problem by Russ Cox:

  http://article.gmane.org/gmane.comp.file-systems.fuse.devel/3826

The following patch fixes the quadratic behavior, by optionally allowing
prune_dcache() to prune ancestors of a dentry in one go, instead of doing
it one at a time.

Common code in dput() and prune_one_dentry() is extracted into a new helper
function d_kill().

shrink_dcache_parent() as well as shrink_dcache_sb() are converted to use
the ancestry-pruner option.  Only for shrink_dcache_memory() is this
behavior not desirable, so it keeps using the old algorithm.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reduce size of task_struct on 64-bit machines

This past week I was playing around with that pahole tool
(http://oops.ghostprotocols.net:81/acme/dwarves/) and looking at the size
of various struct in the kernel.  I was surprised by the size of the
task_struct on x86_64, approaching 4K.  I looked through the fields in
task_struct and found that a number of them were declared as "unsigned
long" rather than "unsigned int" despite them appearing okay as 32-bit
sized fields.  On x86_64 "unsigned long" ends up being 8 bytes in size and
forces 8 byte alignment.  Is there a reason there a reason they are
"unsigned long"?

The patch below drops the size of the struct from 3808 bytes (60 64-byte
cachelines) to 3760 bytes (59 64-byte cachelines).  A couple other fields
in the task struct take a signficant amount of space:

struct thread_struct       thread;               688
struct held_lock           held_locks[30];       1680

CONFIG_LOCKDEP is turned on in the .config

[akpm@linux-foundation.org: fix printk warnings]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2/3/4: fix file date underflow on ext2 3 filesystems on 64 bit systems

Taken from http://bugzilla.kernel.org/show_bug.cgi?id=5079

signed long ranges from -2.147.483.648 to 2.147.483.647 on x86 32bit

10000011110110100100111110111101 .. -2,082,844,739
10000011110110100100111110111101 ..  2,212,122,557 <- this currently gets
stored on the disk but when converting it to a 64bit signed long value it loses
its sign and becomes positive.

Cc: Andreas Dilger <adilger@dilger.ca>
Cc: <linux-ext4@vger.kernel.org>
Andreas says:

This patch is now treating timestamps with the high bit set as negative
times (before Jan 1, 1970).  This means we lose 1/2 of the possible range
of timestamps (lopping off 68 years before unix timestamp overflow -
now only 30 years away :-) to handle the extremely rare case of setting
timestamps into the distant past.

If we are only interested in fixing the underflow case, we could just
limit the values to 0 instead of storing negative values.  At worst this
will skew the timestamp by a few hours for timezones in the far east
(files would still show Jan 1, 1970 in "ls -l" output).

That said, it seems 32-bit systems (mine at least) allow files to be set
into the past (01/01/1907 works fine) so it seems this patch is bringing
the x86_64 behaviour into sync with other kernels.

On the plus side, we have a patch that is ready to add nanosecond timestamps
to ext3 and as an added bonus adds 2 high bits to the on-disk timestamp so
this extends the maximum date to 2242.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow access to /proc/$PID/fd after setuid()

/proc/$PID/fd has r-x------ permissions, so if process does setuid(), it
will not be able to access /proc/*/fd/. This breaks fstatat() emulation
in glibc.

open("foo", O_RDONLY|O_DIRECTORY)       = 4
setuid32(65534)                         = 0
stat64("/proc/self/fd/4/bar", 0xbfafb298) = -1 EACCES (Permission denied)

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Acked-By: Kirill Korotaev <dev@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

simplify the stacktrace code

Simplify the stacktrace code:

 - remove the unused task argument to save_stack_trace, it's always
   current
 - remove the all_contexts flag, it's alwasy 0

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <ak@suse.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

block_write_full_page(): report ENOSPC

block_write_full_page() forgot to propagate ENPSOC into the address_space.

Cc: Guillaume Chazarain <guichaz@yahoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Factor outstanding I/O error handling

Cleanup: setting an outstanding error on a mapping was open coded too many
times.  Factor it out in mapping_set_error().

Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: an idle system should have zero load average

The ever-vigilant users of linode.com noticed that an idle 2.6 UML has a
persistent load average of ~.4.

It turns out that because the UML timer handler processed softirqs before
actually delivering the tick, the tick was counted in the context of the idle
thread about half the time.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: hostfs style fixes

hostfs needed some style goodness.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: make hostfs_setattr() support operations on unlinked open files

This patch allows hostfs_setattr() to work on unlinked open files by calling
set_attr() (the userspace part) with the inode's fd.

Without this, applications that depend on doing attribute changes to unlinked
open files will fail.

It works by using the fd versions instead of the path ones (for example
fchmod() instead of chmod(), fchown() instead of chown()) when an fd is
available.

Signed-off-by: Alberto Bertogli <albertito@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

use SLAB_PANIC flag cleanup

Use SLAB_PANIC and delete duplicated panic().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add white list into modpost.c for memory hotplug code and ia64's machvec section

This patch is add white list into modpost.c for some functions and
ia64's section to fix section mismatchs.

  sparse_index_alloc() and zone_wait_table_init() calls bootmem allocator
  at boot time, and kmalloc/vmalloc at hotplug time. If config
  memory hotplug is on, there are references of bootmem allocater(init text)
  from them (normal text). This is cause of section mismatch.

  Bootmem is called by many functions and it must be
  used only at boot time. I think __init of them should keep for
  section mismatch check. So, I would like to register sparse_index_alloc()
  and zone_wait_table_init() into white list.

  In addition, ia64's .machvec section is function table of some platform
  dependent code. It is mixture of .init.text and normal text. These
  reference of __init functions are valid too.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix section mismatch of memory hotplug related code.

This is to fix many section mismatches of code related to memory hotplug.
I checked compile with memory hotplug on/off on ia64 and x86-64 box.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move common segment checks to separate helper function

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Anton Altaparmakov <aia21@cam.ac.uk>
Acked-by: David Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Increase slab redzone to 64bits

There are two problems with the existing redzone implementation.

Firstly, it's causing misalignment of structures which contain a 64-bit
integer, such as netfilter's 'struct ipt_entry' -- causing netfilter
modules to fail to load because of the misalignment.  (In particular, the
first check in
net/ipv4/netfilter/ip_tables.c::check_entry_size_and_hooks())

On ppc32 and sparc32, amongst others, __alignof__(uint64_t) == 8.

With slab debugging, we use 32-bit redzones. And allocated slab objects
aren't sufficiently aligned to hold a structure containing a uint64_t.

By _just_ setting ARCH_KMALLOC_MINALIGN to __alignof__(u64) we'd disable
redzone checks on those architectures.  By using 64-bit redzones we avoid that
loss of debugging, and also fix the other problem while we're at it.

When investigating this, I noticed that on 64-bit platforms we're using a
32-bit value of RED_ACTIVE/RED_INACTIVE in the 64-bit memory location set
aside for the redzone.  Which means that the four bytes immediately before
or after the allocated object at 0x00,0x00,0x00,0x00 for LE and BE
machines, respectively.  Which is probably not the most useful choice of
poison value.

One way to fix both of those at once is just to switch to 64-bit
redzones in all cases.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SCSI] esp_scsi: Fix section mismatch warnings.
  [VIDEO] sunxvr2500: Fix PCI device ID table.

Fix bluetooth HCI sysfs compile

More fallout from the removal of "struct subsystem" from the core device
model.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[SCSI] esp_scsi: Fix section mismatch warnings.

Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[VIDEO] sunxvr2500: Fix PCI device ID table.

Noticed by Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/aegl/linux-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] update memory attribute aliasing documentation & test cases
  [IA64] fail mmaps that span areas with incompatible attributes
  [IA64] allow WB /sys/.../legacy_mem mmaps
  [IA64] make ioremap avoid unsupported attributes
  [IA64] rename ioremap variables to match i386
  [IA64] relax per-cpu TLB requirement to DTC
  [IA64] remove per-cpu ia64_phys_stacked_size_p8
  [IA64] Fix example error injection program
  [IA64] Itanium MC Error Injection Tool: pal_mc_error_inject() interface
  [IA64] Itanium MC Error Injection Tool: Makefile changes
  [IA64] Itanium MC Error Injection Tool: Driver sysfs interface
  [IA64] Itanium MC Error Injection Tool: Doc and sample application
  [IA64] Itanium MC Error Injection Tool: Kernel configuration

Merge branch 'server-cluster-locking-api' of git://linux-nfs.org/~bfields/linux

* 'server-cluster-locking-api' of git://linux-nfs.org/~bfields/linux:
  gfs2: nfs lock support for gfs2
  lockd: add code to handle deferred lock requests
  lockd: always preallocate block in nlmsvc_lock()
  lockd: handle test_lock deferrals
  lockd: pass cookie in nlmsvc_testlock
  lockd: handle fl_grant callbacks
  lockd: save lock state on deferral
  locks: add fl_grant callback for asynchronous lock return
  nfsd4: Convert NFSv4 to new lock interface
  locks: add lock cancel command
  locks: allow {vfs,posix}_lock_file to return conflicting lock
  locks: factor out generic/filesystem switch from setlock code
  locks: factor out generic/filesystem switch from test_lock
  locks: give posix_test_lock same interface as ->lock
  locks: make ->lock release private data before returning in GETLK case
  locks: create posix-to-flock helper functions
  locks: trivial removal of unnecessary parentheses

Fix up SLUB compile

The newly merged SLUB allocator patches had been generated before the
removal of "struct subsystem", and ended up applying fine, but wouldn't
build based on the current tree as a result.

Fix up that merge error - not that SLUB is likely really ready for
showtime yet, but at least I can fix the trivial stuff.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (34 commits)
  [GFS2] Uncomment sprintf_symbol calling code
  [DLM] lowcomms style
  [GFS2] printk warning fixes
  [GFS2] Patch to fix mmap of stuffed files
  [GFS2] use lib/parser for parsing mount options
  [DLM] Lowcomms nodeid range & initialisation fixes
  [DLM] Fix dlm_lowcoms_stop hang
  [DLM] fix mode munging
  [GFS2] lockdump improvements
  [GFS2] Patch to detect corrupt number of dir entries in leaf and/or inode blocks
  [GFS2] bz 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump)
  [DLM] fs/dlm/ast.c should #include "ast.h"
  [DLM] Consolidate transport protocols
  [DLM] Remove redundant assignment
  [GFS2] Fix bz 234168 (ignoring rgrp flags)
  [DLM] change lkid format
  [DLM] interface for purge (2/2)
  [DLM] add orphan purging code (1/2)
  [DLM] split create_message function
  [GFS2] Set drop_count to 0 (off) by default
  ...

Merge branch 'drm-patches' of /linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Add 965GM pci id update
  drm: just use io_remap_pfn_range on all archs..
  drm: fix DRM_CONSISTENT mapping
  drm: fix up mmap locking in preparation for ttm changes
  drm: fix driver deadlock with AIGLX and reclaim_buffers_locked
  drm: fix warning in drm_fops.c
  drm: allow for more generic drm ioctls
  drm: fix alpha domain handling
  via: fix CX700 pci id
  drm: make drm_io_prot static.
  drm: remove via_mm.h
  drm: add missing NULL assignment
  drm/radeon: Fix u32 overflows when determining AGP base address in card space.
  drm: port over use_vmalloc code from git hashtab
  drm: fix crash with fops lock and fixup sarea/page size locking
  drm: bring bufs code from git tree.
  drm: move protection stuff into separate function
  drm: Use ARRAY_SIZE macro when appropriate
  drm: update README.drm (bugzilla #7933)
  drm: remove unused exports

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: rfkill: add support for input key to control wireless radio
  [NET] net/core: Fix error handling
  [TG3]: Update version and reldate.
  [TG3]: Eliminate spurious interrupts.
  [TG3]: Add ASPM workaround.
  [Bluetooth] Correct SCO buffer for another Broadcom based dongle
  [Bluetooth] Add support for Targus ACB10US USB dongle
  [Bluetooth] Disconnect L2CAP connection after last RFCOMM DLC
  [Bluetooth] Check that device is in rfcomm_dev_list before deleting
  [Bluetooth] Use in-kernel sockets API
  [Bluetooth] Attach host adapters to the Bluetooth bus
  [Bluetooth] Fix L2CAP and HCI setsockopt() information leaks

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SERIAL] sunsu: Fix section mismatch warnings.
  [SPARC64]: pgtable_cache_init() should be __init.
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/prom.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/pci.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/console.c
  [MM]: sparse_init() should be __init.
  [SPARC64]: Update defconfig.
  [VIDEO]: Add Sun XVR-2500 framebuffer driver.
  [VIDEO]: Add Sun XVR-500 framebuffer driver.
  [SPARC64]: SUN4U PCI-E controller support.
  [SPARC]: Fix comment typo in smp4m_blackbox_current().
  [SCSI] SUNESP: sun_esp.c needs linux/delay.h

Fix up conflict in arch/sparc64/mm/init.c manually due to removal of
pgtable_cache_init() through the -mm patches (even though that patch was
also by David ;)

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Convert to NAPI
  IB: Return "maybe missed event" hint from ib_req_notify_cq()
  IB: Add CQ comp_vector support
  IB/ipath: Fix a race condition when generating ACKs
  IB/ipath: Fix two more spin lock problems
  IB/fmr_pool: Add prefix to all printks
  IB/srp: Set proc_name
  IB/srp: Add orig_dgid sysfs attribute to scsi_host
  IPoIB/cm: Don't crash if remote side uses one QP for both directions
  RDMA/cxgb3: Support for new abort logic
  RDMA/cxgb3: Initialize cpu_idx field in cpl_close_listserv_req message
  RDMA/cxgb3: Fail qp creation if the requested max_inline is too large
  RDMA/cxgb3: Fix TERM codes
  IPoIB/cm: Fix error handling in ipoib_cm_dev_open()
  IB/ipath: Don't corrupt pending mmap list when unmapped objects are freed
  IB/mthca: Work around kernel QP starvation
  IB/ipath: Don't put QP in timeout queue if waiting to send
  IB/ipath: Don't call spin_lock_irq() from interrupt context

Merge /pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (38 commits)
  sh: R7785RP board updates.
  sh: Update r7780rp defconfig.
  sh: Add die chain notifiers.
  sh: Fix APM emulation on hp6xx.
  sh: Wire up more IRQs for SH7709.
  sh: Solution Engine 7722 board support.
  sh: Fix r7780rp build.
  sh: kdump support.
  sh: Move clock reporting to its own proc entry.
  sh: Solution Engine SH7705 board and CPU updates.
  serial: sh-sci: Fix module clock refcount for serial console.
  serial: sh-sci: Fix module clock refcounting.
  sh: SH7722 clock framework support.
  sh: hp6xx pata_platform support.
  sh: Obey CONFIG_HZ for HZ definition.
  sh: Fix fstatat64() syscall.
  sh: se7780 PCI support.
  sh: SH7780 Solution Engine board support.
  sh: Add a dummy SH-4 PCIC fixup.
  sh: Tidy up L-BOX area5 addresses.
  ...

spi_s3c24xx.c: Fix build

Commit a836f5856ae46ccb2464ea76031ea05ae967b832 removes the shutdown
member of the bitbang structure, breaking the build of spi_s3c24xx.c.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rename TANBAC TB0219 config

Rename config for TANBAC TB0219 GPIO support to something more appropriate.

Fixes this:

drivers/char/Kconfig:906:warning: type of 'TANBAC_TB0219' redefined from 'boolean' to 'tristate'
drivers/char/Kconfig:907:warning: choice values currently only support a single
prompt

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ehci-ps3, ohci-ps3: fix compilation

As seen on powerpc-cell et al:

  CC [M]  drivers/usb/host/ehci-hcd.o
In file included from drivers/usb/host/ehci-hcd.c:941:
drivers/usb/host/ehci-ps3.c:79: error: conflicting types for 'dev_dbg'
include/linux/device.h:576: error: previous definition of 'dev_dbg' was here
make[4]: *** [drivers/usb/host/ehci-hcd.o] Error 1
  CC [M]  drivers/usb/host/ohci-hcd.o
In file included from drivers/usb/host/ohci-hcd.c:921:
drivers/usb/host/ohci-ps3.c:83: error: conflicting types for 'dev_dbg'
include/linux/device.h:576: error: previous definition of 'dev_dbg' was here

dev_dbg() will check format string for you in dummy case also, so remove
buggers.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix ppp_deflate issues with recent zlib_inflate changes

The last zlib_inflate update broke certain corner cases for ppp_deflate
decompression handling.  This patch fixes some logic to make things work
properly again.  Users other than ppp_deflate (the only Z_PACKET_FLUSH
user) should be unaffected.

Fixes bug 8405 (confirmed by Stefan)

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Stefan Wenk <stefan.wenk@gmx.at>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cx88-video build fix

alpha:

drivers/media/video/cx88/cx88-video.c: In function 'cx8800_initdev':
drivers/media/video/cx88/cx88-video.c:1782: error: 'DMA_32BIT_MASK' undeclared (first use in this function)
drivers/media/video/cx88/cx88-video.c:1782: error: (Each undeclared identifier is reported only once
drivers/media/video/cx88/cx88-video.c:1782: error: for each function it appears in.)

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xtensa: strlcpy is smart enough

strlcpy already accounts for the trailing zero in its length
computation, so there is no need to substract one to the buffer size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

v850: generic timekeeping conversion

Convert an arch that does not currently implement sub-jiffy timekeeping to
use the generic timekeeping code.

v850 looks like it has some intent to implement sub-jiffy timekeeping, so
it may not yet be appropriate to try to convert, but I figured I'd get the
maintainer's input and submit the patch for comment.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix prototypes

Declare strlcpy and strlcat more correctly.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: virtualized time fix

With the current timekeeping, !CONFIG_UML_REAL_TIME_CLOCK has
inconsistent behavior.  Previously, gettimeofday could be (and was)
isolated from the clock ticking.  Now, it's not, so when
CONFIG_UML_REAL_TIME_CLOCK is disabled, gettimeofday must progress in
lockstep with the clock, making it fully virtual.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: out of tmpfs space error clarification

It turns out that the message complaining about a lack of tmpfs space
on the host can be misunderstood as referring to the UML.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: only flush areas covered by VMA

When doing a full address space flush, only look at areas covered by a VMA.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>