project/netifd.git
11 years agobridge: fix corner case with network reload
Luka Perkov [Thu, 29 Aug 2013 13:28:27 +0000 (15:28 +0200)]
bridge: fix corner case with network reload

After removing all ifname options from bridge interface and executing network
reload the configuration was not applied properly on the system. With this
change that is no longer a issue.

Signed-off-by: Luka Perkov <luka@openwrt.org>
11 years agoIPv6: fix prefix assignment with continuous hints
Steven Barth [Tue, 16 Jul 2013 12:01:52 +0000 (14:01 +0200)]
IPv6: fix prefix assignment with continuous hints

11 years agobridge: add bridge_empty option which allows creation of empty bridges
Luka Perkov [Thu, 11 Jul 2013 22:20:59 +0000 (00:20 +0200)]
bridge: add bridge_empty option which allows creation of empty bridges

Signed-off-by: Luka Perkov <luka@openwrt.org>
11 years agointerface: fix NULL pointer defref in interface_set_main_dev
Felix Fietkau [Tue, 18 Jun 2013 16:24:37 +0000 (18:24 +0200)]
interface: fix NULL pointer defref in interface_set_main_dev

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoIPv6: Reverse assignment sorting order
Steven Barth [Mon, 17 Jun 2013 21:28:30 +0000 (23:28 +0200)]
IPv6: Reverse assignment sorting order

11 years agoIPv6: Satisfy unhinted assignments ordered by prefix length
Steven Barth [Mon, 17 Jun 2013 21:15:02 +0000 (23:15 +0200)]
IPv6: Satisfy unhinted assignments ordered by prefix length

11 years agoconfig: use the new uci_blob library code
Felix Fietkau [Mon, 10 Jun 2013 12:31:02 +0000 (14:31 +0200)]
config: use the new uci_blob library code

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoconfig: replace config_memdup with blob_memdup from libubox
Felix Fietkau [Mon, 10 Jun 2013 11:23:06 +0000 (13:23 +0200)]
config: replace config_memdup with blob_memdup from libubox

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoChange IP reloading order
Steven Barth [Mon, 10 Jun 2013 10:33:32 +0000 (12:33 +0200)]
Change IP reloading order

11 years agoReuse automatic ip6table value
Steven Barth [Mon, 10 Jun 2013 08:01:20 +0000 (10:01 +0200)]
Reuse automatic ip6table value

11 years agoIPv6: Improve source-routing policies
Steven Barth [Mon, 3 Jun 2013 16:42:10 +0000 (18:42 +0200)]
IPv6: Improve source-routing policies
* Set a default policy-failed rule per prefix (based on a patch by Jonas Gorski)
* Use input interface in addition to source for filtering
* Avoid duplicate routing policies

11 years agoIPv6: fix device_prefix vlist_key to not include prefix class
Steven Barth [Fri, 31 May 2013 15:05:58 +0000 (17:05 +0200)]
IPv6: fix device_prefix vlist_key to not include prefix class

11 years agomove excluded prefix and length out of key for device_prefix
Steven Barth [Fri, 31 May 2013 14:56:07 +0000 (16:56 +0200)]
move excluded prefix and length out of key for device_prefix

11 years agoAdd missing update-triggers for source-based routing
Steven Barth [Thu, 30 May 2013 14:33:44 +0000 (16:33 +0200)]
Add missing update-triggers for source-based routing

11 years agoIPv6: reorganize prefix assignment
Steven Barth [Thu, 30 May 2013 14:32:00 +0000 (16:32 +0200)]
IPv6: reorganize prefix assignment
* put parameters in a more suitable place
* add support for prefix classes

11 years agoIPv6: Log a warning if users have prefixes but haven't assigned them
Steven Barth [Thu, 30 May 2013 07:37:34 +0000 (09:37 +0200)]
IPv6: Log a warning if users have prefixes but haven't assigned them

11 years agoIPv6: remove ULA prefix-trigger (unused)
Steven Barth [Wed, 29 May 2013 07:36:20 +0000 (09:36 +0200)]
IPv6: remove ULA prefix-trigger (unused)

11 years agoIPv6: fix address-lifetime overflows on 64-bit architectures
Steven Barth [Tue, 28 May 2013 18:47:33 +0000 (20:47 +0200)]
IPv6: fix address-lifetime overflows on 64-bit architectures

11 years agoIPv6: fix wrap-arounds in address lifetimes
Steven Barth [Tue, 28 May 2013 17:59:19 +0000 (19:59 +0200)]
IPv6: fix wrap-arounds in address lifetimes

11 years agoMake sure that iprule flushing happens after system_init(), otherwise the rtnl_socket...
Jo-Philipp Wich [Tue, 28 May 2013 10:11:12 +0000 (12:11 +0200)]
Make sure that iprule flushing happens after system_init(), otherwise the rtnl_socket is not available

11 years agoMove iprule flushing to the init function to make the timing predictable
Jo-Philipp Wich [Mon, 27 May 2013 17:57:58 +0000 (19:57 +0200)]
Move iprule flushing to the init function to make the timing predictable

11 years agoMove initial iprule flushing to system_add_iprule() to not collide with generic multi...
Jo-Philipp Wich [Mon, 27 May 2013 17:45:20 +0000 (19:45 +0200)]
Move initial iprule flushing to system_add_iprule() to not collide with generic multiwan support

11 years agoAdd option to define target routing table for protocol routes.
Steven Barth [Fri, 17 May 2013 14:24:37 +0000 (16:24 +0200)]
Add option to define target routing table for protocol routes.
This unifies source-routing for both IPv6 and IPv4 (default off).

Based on a patch by Kristian Evensen

11 years agoIPv6: Set loopback-policy for output traffic
Steven Barth [Mon, 13 May 2013 16:41:00 +0000 (18:41 +0200)]
IPv6: Set loopback-policy for output traffic

Signed-off-by: Steven Barth <steven@midlink.org>
11 years agoUse logical instead of physical name for tunnel underlying link.
Steven Barth [Mon, 13 May 2013 09:12:10 +0000 (11:12 +0200)]
Use logical instead of physical name for tunnel underlying link.

Signed-off-by: Steven Barth <steven@midlink.org>
11 years agoAdd support for IPv6 and interface target-routes & dependencies
Steven Barth [Mon, 13 May 2013 08:55:01 +0000 (10:55 +0200)]
Add support for IPv6 and interface target-routes & dependencies

Signed-off-by: Steven Barth <steven@midlink.org>
11 years agoAdd support for IP in IPv6 tunnels (DS-Lite)
Steven Barth [Mon, 13 May 2013 07:23:06 +0000 (09:23 +0200)]
Add support for IP in IPv6 tunnels (DS-Lite)

Signed-off-by: Steven Barth <steven@midlink.org>
11 years agoIPv6: Use source-routing to allow multi-wan
Steven Barth [Sat, 11 May 2013 10:56:02 +0000 (12:56 +0200)]
IPv6: Use source-routing to allow multi-wan

11 years agoIPv6: Use key=val format for prefix options
Steven Barth [Wed, 8 May 2013 14:47:55 +0000 (16:47 +0200)]
IPv6: Use key=val format for prefix options

11 years agoutils: use list_add_tail() in vlist_simple_add() to preserve user-defined order of...
Jo-Philipp Wich [Thu, 2 May 2013 08:47:40 +0000 (10:47 +0200)]
utils: use list_add_tail() in vlist_simple_add() to preserve user-defined order of entries

11 years agobridge: disable multicast snooping by default
Jo-Philipp Wich [Sat, 27 Apr 2013 09:14:07 +0000 (11:14 +0200)]
bridge: disable multicast snooping by default

11 years agointerface: fix removing main_dev on config reload changes if ifname is reset to NULL
Felix Fietkau [Thu, 25 Apr 2013 16:27:20 +0000 (18:27 +0200)]
interface: fix removing main_dev on config reload changes if ifname is reset to NULL

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agointerface: rework reload, ensure that all changes are applied before restarting the...
Felix Fietkau [Thu, 25 Apr 2013 16:19:45 +0000 (18:19 +0200)]
interface: rework reload, ensure that all changes are applied before restarting the interface

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoset default bridge priority to 0x7FFF
Jo-Philipp Wich [Tue, 23 Apr 2013 14:04:36 +0000 (16:04 +0200)]
set default bridge priority to 0x7FFF

11 years agoadd bridge priority option
Niels Boehm [Mon, 4 Feb 2013 18:05:17 +0000 (18:05 +0000)]
add bridge priority option

[netifd] add bridge priority option

Using the bridge priority (lower numbers are higher in the
hierarchy), one can ensure that the router is chosen as root
bridge in a setup with spanning tree protocol.

For instance, one can set the priority of network lan to 32767,
causing the router to win over all directly and indirectly
connected nodes that have a default priority of 32768.

The reason for doing that is that otherwise it has a default
priority 32768 as well and any other connected node could win and
get root bridge. In a home setup, those nodes are often desktop
or laptop boxes and get switched off from time to time. As a
consequence, root bridges vanish or new root bridges get chosen
relatively often, resulting in frequent topology changes to the
STP network. While the new topology has not settled, packets can
get lost, causing noticeable interruptions of network traffic.

Setting the router's bridge on a lower numbered priority (and thus
higher in the selection hierarchy) solves the problem in the vast
majority of the cases by ensuring that the device that is most
likely powered on 24/7 gets chosen as root and prevents topology
changes.

Signed-off-by: Niels Boehm <blubberdiblub@gmail.com>
11 years agoIPv6: Try harder to assign prefix parts
Steven Barth [Fri, 19 Apr 2013 13:36:19 +0000 (15:36 +0200)]
IPv6: Try harder to assign prefix parts

11 years agodevice: use safe_list for device event, fixes some hang issues
Felix Fietkau [Mon, 15 Apr 2013 14:20:50 +0000 (16:20 +0200)]
device: use safe_list for device event, fixes some hang issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoIPv6: Remove local ULA if there is an external one
Steven Barth [Tue, 9 Apr 2013 13:41:00 +0000 (15:41 +0200)]
IPv6: Remove local ULA if there is an external one

11 years agoFix comparisation conditions in route_cmp()
Jo-Philipp Wich [Tue, 9 Apr 2013 12:16:19 +0000 (14:16 +0200)]
Fix comparisation conditions in route_cmp()

11 years agoFix a memory corruption when updating IPv6 prefixes
Steven Barth [Fri, 5 Apr 2013 13:25:38 +0000 (15:25 +0200)]
Fix a memory corruption when updating IPv6 prefixes

11 years agoMaintain config order of ip rules unless user explicitely provides priority
Jo-Philipp Wich [Fri, 5 Apr 2013 11:45:08 +0000 (13:45 +0200)]
Maintain config order of ip rules unless user explicitely provides priority

11 years agofix route sorting order
Felix Fietkau [Fri, 5 Apr 2013 11:14:44 +0000 (13:14 +0200)]
fix route sorting order

New sorting order:
 - prefix length (descending)
 - metric (ascending)
 - flags
 - target address

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoAdd myself to header for IPv6 work
Steven Barth [Fri, 5 Apr 2013 11:31:37 +0000 (13:31 +0200)]
Add myself to header for IPv6 work

11 years agoFix system_resolve_rt_table() stub in system-dummy.c
Jo-Philipp Wich [Fri, 5 Apr 2013 10:24:13 +0000 (12:24 +0200)]
Fix system_resolve_rt_table() stub in system-dummy.c

11 years agoIncorperate route table into avl key
Jo-Philipp Wich [Fri, 5 Apr 2013 09:15:58 +0000 (11:15 +0200)]
Incorperate route table into avl key

11 years agoExpose route table if route is not in the main table
Jo-Philipp Wich [Thu, 4 Apr 2013 12:41:40 +0000 (14:41 +0200)]
Expose route table if route is not in the main table

11 years agoAdd support for ip rules
Jo-Philipp Wich [Thu, 4 Apr 2013 12:41:39 +0000 (14:41 +0200)]
Add support for ip rules

11 years agoImplement support for route / route6 table attribute
Jo-Philipp Wich [Thu, 4 Apr 2013 12:41:38 +0000 (14:41 +0200)]
Implement support for route / route6 table attribute

11 years agoRewrite IPv6 prefix assignment
Steven Barth [Wed, 3 Apr 2013 18:03:15 +0000 (20:03 +0200)]
Rewrite IPv6 prefix assignment

11 years agoFix IPv6 RDNSS writing to resolv.conf (buffer was too short)
Steven Barth [Tue, 19 Mar 2013 10:13:15 +0000 (11:13 +0100)]
Fix IPv6 RDNSS writing to resolv.conf (buffer was too short)

11 years agofix libnl detection
Thomas Gstädtner [Sun, 3 Mar 2013 17:20:10 +0000 (18:20 +0100)]
fix libnl detection

11 years agoOnly update resolv.conf if changed (avoid logspam)
Steven Barth [Tue, 19 Feb 2013 08:36:23 +0000 (09:36 +0100)]
Only update resolv.conf if changed (avoid logspam)

11 years agoprefer to link against libjson-c over libjson (the new library name in git versions...
Felix Fietkau [Mon, 11 Feb 2013 21:10:03 +0000 (22:10 +0100)]
prefer to link against libjson-c over libjson (the new library name in git versions of json-c)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agodevice: protect device event broadcast against simultaneous deletions of multiple...
Felix Fietkau [Sun, 10 Feb 2013 18:14:35 +0000 (19:14 +0100)]
device: protect device event broadcast against simultaneous deletions of multiple receivers in the callback (can happen with aliases)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoproto: default to 128 instead of the "netmask" option for ipv6 addresses
Felix Fietkau [Sun, 10 Feb 2013 18:02:49 +0000 (19:02 +0100)]
proto: default to 128 instead of the "netmask" option for ipv6 addresses

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoImproved IPv6 featureset
Steven Barth [Fri, 1 Feb 2013 12:17:41 +0000 (13:17 +0100)]
Improved IPv6 featureset
* Fix reloading of ula-prefixes
* Added support for temporary addresses and routes
* Added support for offlink addresses
* Improved status-output for assigned prefixes

11 years agoproto-shell: use the new network.interface object
Felix Fietkau [Tue, 29 Jan 2013 14:36:51 +0000 (15:36 +0100)]
proto-shell: use the new network.interface object

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoubus: add a network.interface object to access network.interface.* methods without...
Felix Fietkau [Tue, 29 Jan 2013 14:33:22 +0000 (15:33 +0100)]
ubus: add a network.interface object to access network.interface.* methods without racing wrt. object add/remove

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agofix cleaning up interface state for reload
Felix Fietkau [Tue, 29 Jan 2013 14:00:01 +0000 (15:00 +0100)]
fix cleaning up interface state for reload

Do not clean up config related state or interface dependencies

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoAdd deprecation for static IPv6 prefixes
Steven Barth [Tue, 29 Jan 2013 10:57:18 +0000 (11:57 +0100)]
Add deprecation for static IPv6 prefixes

11 years agoIPv6 prefixes: conform to RFC 6204 requirement L13
Steven Barth [Tue, 29 Jan 2013 10:36:32 +0000 (11:36 +0100)]
IPv6 prefixes: conform to RFC 6204 requirement L13

11 years agoalias: set ifindex on alias device to fix setting addresses/routes
Felix Fietkau [Mon, 28 Jan 2013 20:33:05 +0000 (21:33 +0100)]
alias: set ifindex on alias device to fix setting addresses/routes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoalias: if the underlying device changes (or goes away), set the device present status...
Felix Fietkau [Tue, 22 Jan 2013 16:04:40 +0000 (17:04 +0100)]
alias: if the underlying device changes (or goes away), set the device present status to false to make its users shut down

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoDon't segfault with an unset ula_prefix
Steven Barth [Tue, 22 Jan 2013 15:42:40 +0000 (16:42 +0100)]
Don't segfault with an unset ula_prefix

11 years agoFix segfaults in prefix handling
Steven Barth [Mon, 21 Jan 2013 08:50:43 +0000 (09:50 +0100)]
Fix segfaults in prefix handling

11 years agoalias: rework device updates
Felix Fietkau [Sun, 20 Jan 2013 15:45:59 +0000 (16:45 +0100)]
alias: rework device updates

Apply immediately if alias device is not claimed, otherwise defer until release

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoalias: use layer 3 device instead of main device
Steven Barth [Wed, 16 Jan 2013 13:56:10 +0000 (14:56 +0100)]
alias: use layer 3 device instead of main device

11 years agoFix a race-condition in prefix-assignment
Steven Barth [Tue, 15 Jan 2013 12:19:34 +0000 (13:19 +0100)]
Fix a race-condition in prefix-assignment

11 years agointerface-ip: use calloc_a to get rid of an extra allocation
Felix Fietkau [Tue, 15 Jan 2013 10:08:19 +0000 (11:08 +0100)]
interface-ip: use calloc_a to get rid of an extra allocation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agointerface-ip: replace prefix_assignment_cmp with avl_strcmp
Felix Fietkau [Tue, 15 Jan 2013 10:00:23 +0000 (11:00 +0100)]
interface-ip: replace prefix_assignment_cmp with avl_strcmp

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoremove commented out TODO items
Felix Fietkau [Tue, 15 Jan 2013 09:57:14 +0000 (10:57 +0100)]
remove commented out TODO items

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoInitial IPv6 prefix support
Steven Barth [Tue, 8 Jan 2013 17:52:32 +0000 (18:52 +0100)]
Initial IPv6 prefix support

Signed-off-by: Steven Barth <steven@midlink.org>
11 years agoadd mac os x compat #define for in6_addr s6_addr32
Felix Fietkau [Tue, 15 Jan 2013 09:54:37 +0000 (10:54 +0100)]
add mac os x compat #define for in6_addr s6_addr32

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agosystem-linux.c: use uin64_t datatype to read and store interface statistics, pass...
Jo-Philipp Wich [Sun, 13 Jan 2013 19:34:36 +0000 (20:34 +0100)]
system-linux.c: use uin64_t datatype to read and store interface statistics, pass values as u64 blob type

11 years agofix removal of unknown device
Nathan Hintz [Sun, 6 Jan 2013 02:41:45 +0000 (18:41 -0800)]
fix removal of unknown device

Netifd will crash if an attempt is made to remove a device that is not
known to netifd.  For instance:

  ubus call network.interface.lan remove_device "{ \"name\": \"xxx\" }"

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
11 years agoproto-shell: use calloc_a
Felix Fietkau [Sat, 5 Jan 2013 15:13:29 +0000 (16:13 +0100)]
proto-shell: use calloc_a

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoutils.h: get rid of the duplicate BUILD_BUG_ON definition, use the one from libubox
Felix Fietkau [Sat, 5 Jan 2013 14:48:57 +0000 (15:48 +0100)]
utils.h: get rid of the duplicate BUILD_BUG_ON definition, use the one from libubox

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agouse calloc_a for interface error allocations
Felix Fietkau [Mon, 31 Dec 2012 15:36:01 +0000 (16:36 +0100)]
use calloc_a for interface error allocations

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agointerface: do not clear errors after an interface is marked as down, the user might...
Felix Fietkau [Mon, 31 Dec 2012 15:35:13 +0000 (16:35 +0100)]
interface: do not clear errors after an interface is marked as down, the user might like to read them

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agolog: fix processing of incomplete lines
Felix Fietkau [Sat, 29 Dec 2012 17:54:54 +0000 (18:54 +0100)]
log: fix processing of incomplete lines

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agoduplicate error subsystem and code for interface errors to prevent accessing stale...
Felix Fietkau [Mon, 17 Dec 2012 22:22:46 +0000 (23:22 +0100)]
duplicate error subsystem and code for interface errors to prevent accessing stale data

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agonetifd: stop using jshn_append
Felix Fietkau [Mon, 17 Dec 2012 14:55:45 +0000 (15:55 +0100)]
netifd: stop using jshn_append

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agorewrite resolv.conf after any interface state change (not just up)
Felix Fietkau [Thu, 13 Dec 2012 16:13:43 +0000 (17:13 +0100)]
rewrite resolv.conf after any interface state change (not just up)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agorewrite resolv.conf after interface up setting updates
Felix Fietkau [Wed, 5 Dec 2012 13:26:09 +0000 (14:26 +0100)]
rewrite resolv.conf after interface up setting updates

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agofix error checking of asprintf
Frank Meerkötter [Mon, 3 Dec 2012 18:29:16 +0000 (19:29 +0100)]
fix error checking of asprintf

see man asprintf
  [...]
  RETURN VALUE
   When  successful, these  functions return the number of bytes printed, just like sprintf(3).
   If memory allocation wasn't possible, or some other error occurs, these functions will return -1,
   and the contents of strp is undefined.

Signed-off-by: Frank Meerkötter <frank@meerkoetter.org>
12 years agoalias: add (and call) a check_state function to fix dynamically creating aliases...
Felix Fietkau [Tue, 30 Oct 2012 00:21:35 +0000 (01:21 +0100)]
alias: add (and call) a check_state function to fix dynamically creating aliases for interfaces that are already up

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agofix container_of for the log ustream
Felix Fietkau [Tue, 30 Oct 2012 00:13:17 +0000 (01:13 +0100)]
fix container_of for the log ustream

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agomove uloop_process_delete call to get rid of an unnecessary check
Felix Fietkau [Tue, 30 Oct 2012 00:12:35 +0000 (01:12 +0100)]
move uloop_process_delete call to get rid of an unnecessary check

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agoproto-shell: ensure that the teardown timeout gets killed
Felix Fietkau [Mon, 29 Oct 2012 23:50:47 +0000 (00:50 +0100)]
proto-shell: ensure that the teardown timeout gets killed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agolog: the ustream notify_state callback is now optional, remove the stub
Felix Fietkau [Mon, 29 Oct 2012 23:03:47 +0000 (00:03 +0100)]
log: the ustream notify_state callback is now optional, remove the stub

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
12 years agouse ustream for process message logging
Felix Fietkau [Mon, 29 Oct 2012 22:55:14 +0000 (23:55 +0100)]
use ustream for process message logging

12 years agouse FD_CLOEXEC instead of tracking lists of fds
Felix Fietkau [Mon, 29 Oct 2012 22:08:01 +0000 (23:08 +0100)]
use FD_CLOEXEC instead of tracking lists of fds

12 years agobridge: toggle device present state after freeing a bridge member to ensure that...
Felix Fietkau [Fri, 19 Oct 2012 13:49:46 +0000 (15:49 +0200)]
bridge: toggle device present state after freeing a bridge member to ensure that it can be reassigned to a different bridge

12 years agofree unused devices after cleaning up interfaces to get rid of recently-freed bridge...
Felix Fietkau [Fri, 19 Oct 2012 13:49:21 +0000 (15:49 +0200)]
free unused devices after cleaning up interfaces to get rid of recently-freed bridge devices

12 years agofix device_lock/device_unlock imbalances
Felix Fietkau [Fri, 19 Oct 2012 13:48:52 +0000 (15:48 +0200)]
fix device_lock/device_unlock imbalances

12 years agosystem-linux: do not delete kernel-generated ipv6 routes to fix using advertised...
Felix Fietkau [Fri, 28 Sep 2012 23:07:59 +0000 (01:07 +0200)]
system-linux: do not delete kernel-generated ipv6 routes to fix using advertised routes

12 years agodevice.c: use format_macaddr() helper to convert mac addresses to strings, ether_ntoa...
Jo-Philipp Wich [Fri, 28 Sep 2012 15:41:08 +0000 (17:41 +0200)]
device.c: use format_macaddr() helper to convert mac addresses to strings, ether_ntoa() does not guarantee a canonical format

12 years agoutils.c: add helper function to format mac addresses as strings
Jo-Philipp Wich [Fri, 28 Sep 2012 15:40:38 +0000 (17:40 +0200)]
utils.c: add helper function to format mac addresses as strings

12 years agoubus.c: now that disabled routes are in the inactive subtable it makes no sense to...
Jo-Philipp Wich [Thu, 13 Sep 2012 07:24:12 +0000 (10:24 +0300)]
ubus.c: now that disabled routes are in the inactive subtable it makes no sense to expose the enabled attribute anymore

12 years agoubus.c: move disabled routes, ips, dns server into an "inactive" subtable
Jo-Philipp Wich [Thu, 13 Sep 2012 06:57:16 +0000 (09:57 +0300)]
ubus.c: move disabled routes, ips, dns server into an "inactive" subtable