git.openwrt.org Git - openwrt/staging/blogic.git/log

dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings

The phy_mode "2000base-x" is actually supposed to be "1000base-x", even
though the commit title of the original patch says otherwise.

Fixes: 55601a880690 ("net: phy: Add 2000base-x, 2500base-x and rxaui modes")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Change interrupt and napi enable order in open

Current order in open:
-> Enable interrupts (macb_init_hw)
-> Enable NAPI
-> Start PHY

Sequence of RX handling:
-> RX interrupt occurs
-> Interrupt is cleared and interrupt bits disabled in handler
-> NAPI is scheduled
-> In NAPI, RX budget is processed and RX interrupts are re-enabled

With the above, on QEMU or fixed link setups (where PHY state doesn't
matter), there's a chance macb RX interrupt occurs before NAPI is
enabled. This will result in NAPI being scheduled before it is enabled.
Fix this macb open by changing the order.

Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vrf: sit mtu should not be updated when vrf netdev is the link

VRF netdev mtu isn't typically set and have an mtu of 65536. When the
link of a tunnel is set, the tunnel mtu is changed from 1480 to the link
mtu minus tunnel header. In the case of VRF netdev is the link, then the
tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in
this case.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: Fix error cleanup path in dsa_init_module

BUG: unable to handle kernel paging request at ffffffffa01c5430
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:raw_notifier_chain_register+0x16/0x40
Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08
RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282
RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b
RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068
RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700
R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78
FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0
Call Trace:
register_netdevice_notifier+0x43/0x250
? 0xffffffffa01e0000
dsa_slave_register_notifier+0x13/0x70 [dsa_core
? 0xffffffffa01e0000
dsa_init_module+0x2e/0x1000 [dsa_core
do_one_initcall+0x6c/0x3cc
? do_init_module+0x22/0x1f1
? rcu_read_lock_sched_held+0x97/0xb0
? kmem_cache_alloc_trace+0x325/0x3b0
do_init_module+0x5b/0x1f1
load_module+0x1db1/0x2690
? m_show+0x1d0/0x1d0
__do_sys_finit_module+0xc5/0xd0
__x64_sys_finit_module+0x15/0x20
do_syscall_64+0x6b/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cleanup allocated resourses if there are errors,
otherwise it will trgger memleak.

Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: Fix possible NULL pointer dereference

BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
PGD 0 P4D 0
Oops: 0000 [#1
CPU: 0 PID: 5697 Comm: modprobe Tainted: G        W         5.1.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__lock_acquire+0x53/0x10b0
Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a
RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128
RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000
FS:  00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0
Call Trace:
? __lock_acquire+0x24e/0x10b0
lock_acquire+0xdf/0x230
? flush_workqueue+0x71/0x530
flush_workqueue+0x97/0x530
? flush_workqueue+0x71/0x530
l2tp_exit_net+0x170/0x2b0 [l2tp_core
? l2tp_exit_net+0x93/0x2b0 [l2tp_core
ops_exit_list.isra.6+0x36/0x60
unregister_pernet_operations+0xb8/0x110
unregister_pernet_device+0x25/0x40
l2tp_init+0x55/0x1000 [l2tp_core
? 0xffffffffa018d000
do_one_initcall+0x6c/0x3cc
? do_init_module+0x22/0x1f1
? rcu_read_lock_sched_held+0x97/0xb0
? kmem_cache_alloc_trace+0x325/0x3b0
do_init_module+0x5b/0x1f1
load_module+0x1db1/0x2690
? m_show+0x1d0/0x1d0
__do_sys_finit_module+0xc5/0xd0
__x64_sys_finit_module+0x15/0x20
do_syscall_64+0x6b/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fead031a839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839
RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003
RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80
Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core
CR2: 0000000000000128
---[ end trace 8322b2b8bf83f8e1

If alloc_workqueue fails in l2tp_init, l2tp_net_ops
is unregistered on failure path. Then l2tp_exit_net
is called which will flush NULL workqueue, this patch
add a NULL check to fix it.

Fixes: 67e04c29ec0d ("l2tp: unregister l2tp_net_ops on failure path")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2019-05-06

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Two x32 JIT fixes: one which has buggy signed comparisons in 64
bit conditional jumps and another one for 64 bit negation, both
from Wang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Define __ipv4_neigh_lookup_noref when CONFIG_INET is disabled

Define __ipv4_neigh_lookup_noref to return NULL when CONFIG_INET is disabled.

Fixes: 4b2a2bfeb3f0 ("neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6: fix skb leak in ip6frag_expire_frag_queue()

Since ip6frag_expire_frag_queue() now pulls the head skb
from frag queue, we should no longer use skb_get(), since
this leads to an skb leak.

Stefan Bader initially reported a problem in 4.4.stable [1] caused
by the skb_get(), so this patch should also fix this issue.

296583.091021] kernel BUG at /build/linux-6VmqmP/linux-4.4.0/net/core/skbuff.c:1207!
[296583.091734] Call Trace:
[296583.091749]  [<ffffffff81740e50>] __pskb_pull_tail+0x50/0x350
[296583.091764]  [<ffffffff8183939a>] _decode_session6+0x26a/0x400
[296583.091779]  [<ffffffff817ec719>] __xfrm_decode_session+0x39/0x50
[296583.091795]  [<ffffffff818239d0>] icmpv6_route_lookup+0xf0/0x1c0
[296583.091809]  [<ffffffff81824421>] icmp6_send+0x5e1/0x940
[296583.091823]  [<ffffffff81753238>] ? __netif_receive_skb+0x18/0x60
[296583.091838]  [<ffffffff817532b2>] ? netif_receive_skb_internal+0x32/0xa0
[296583.091858]  [<ffffffffc0199f74>] ? ixgbe_clean_rx_irq+0x594/0xac0 [ixgbe]
[296583.091876]  [<ffffffffc04eb260>] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6]
[296583.091893]  [<ffffffff8183d431>] icmpv6_send+0x21/0x30
[296583.091906]  [<ffffffff8182b500>] ip6_expire_frag_queue+0xe0/0x120
[296583.091921]  [<ffffffffc04eb27f>] nf_ct_frag6_expire+0x1f/0x30 [nf_defrag_ipv6]
[296583.091938]  [<ffffffff810f3b57>] call_timer_fn+0x37/0x140
[296583.091951]  [<ffffffffc04eb260>] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6]
[296583.091968]  [<ffffffff810f5464>] run_timer_softirq+0x234/0x330
[296583.091982]  [<ffffffff8108a339>] __do_softirq+0x109/0x2b0

Fixes: d4289fcc9b16 ("net: IP6 defrag: use rbtrees for IPv6 defrag")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Cc: Peter Oskolkov <posk@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ucc_geth - fix Oops when changing number of buffers in the ring

When changing the number of buffers in the RX ring while the interface
is running, the following Oops is encountered due to the new number
of buffers being taken into account immediately while their allocation
is done when opening the device only.

[   69.882706] Unable to handle kernel paging request for data at address 0xf0000100
[   69.890172] Faulting instruction address: 0xc033e164
[   69.895122] Oops: Kernel access of bad area, sig: 11 [#1]
[   69.900494] BE PREEMPT CMPCPRO
[   69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269
[   69.915956] task: c0684310 task.stack: c06da000
[   69.920470] NIP:  c033e164 LR: c02e44d0 CTR: c02e41fc
[   69.925504] REGS: dfff1e20 TRAP: 0300   Not tainted  (4.14.115-00006-g179ade8ce3-dirty)
[   69.934161] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 22004428  XER: 20000000
[   69.940869] DAR: f0000100 DSISR: 20000000
[   69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f
[   69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0
[   69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001
[   69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044
[   69.978348] NIP [c033e164] skb_put+0x0/0x5c
[   69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8
[   69.987384] Call Trace:
[   69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable)
[   69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c
[   70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310
[   70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4
[   70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c
[   70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4
[   70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14
[   70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90
[   70.027964]     LR = rcu_idle_exit+0x74/0x90
[   70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable)
[   70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c
[   70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c
[   70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384
[   70.059153] [c06dbff0] [00003438] 0x3438
[   70.063062] Instruction dump:
[   70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910
[   70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910
[   70.081690] ---[ end trace be7ccd9c1e1a9f12 ]---

This patch forbids the modification of the number of buffers in the
ring while the interface is running.

Fixes: ac421852b3a0 ("ucc_geth: add ethtool support")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa_eth: fix SG frame cleanup

Fix issue with the entry indexing in the sg frame cleanup code being
off-by-1. This problem showed up when doing some basic iperf tests and
manifested in traffic coming to a halt.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rds: fix spelling mistake "syctl" -> "sysctl"

There is a spelling mistake in a pr_warn warning. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_cgroup: avoid panic when receiving a packet before filter set

When a cgroup classifier is added, there is a small time interval in
which tp->root is NULL. If we receive a packet in this small time slice
a NULL pointer dereference will happen, leading to a kernel panic:

    # mkdir /sys/fs/cgroup/net_cls/0
    # echo 0x100001 >  /sys/fs/cgroup/net_cls/0/net_cls.classid
    # echo $$ >/sys/fs/cgroup/net_cls/0/tasks
    # ping -qfb 255.255.255.255 -I eth0 &>/dev/null &
    # tc qdisc add dev eth0 root handle 10: htb
    # while : ; do
    > tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup
    > tc filter delete dev eth0
    > done
    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
    Mem abort info:
      ESR = 0x96000005
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000005
      CM = 0, WnR = 0
    user pgtable: 4k pages, 39-bit VAs, pgdp = 0000000098a7ff91
    [0000000000000028] pgd=0000000000000000, pud=0000000000000000
    Internal error: Oops: 96000005 [#1] SMP
    Modules linked in: sch_htb cls_cgroup algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore usb_common spi_orion sfp i2c_mv64xxx phy_generic mdio_i2c marvell10g i2c_core mvpp2 mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4
    Process ping (pid: 5421, stack limit = 0x00000000b20b1505)
    CPU: 3 PID: 5421 Comm: ping Not tainted 5.1.0-rc6 #31
    Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT)
    pstate: 60000005 (nZCv daif -PAN -UAO)
    pc : cls_cgroup_classify+0x80/0xec [cls_cgroup]
    lr : cls_cgroup_classify+0x34/0xec [cls_cgroup]
    sp : ffffff8012e6b850
    x29: ffffff8012e6b850 x28: ffffffc423dd3c00
    x27: ffffff801093ebc0 x26: ffffffc425a85b00
    x25: 0000000020000000 x24: 0000000000000000
    x23: ffffff8012e6b910 x22: ffffffc428db4900
    x21: ffffff8012e6b910 x20: 0000000000100001
    x19: 0000000000000000 x18: 0000000000000000
    x17: 0000000000000000 x16: 0000000000000000
    x15: 0000000000000000 x14: 0000000000000000
    x13: 0000000000000000 x12: 000000000000001c
    x11: 0000000000000018 x10: ffffff8012e6b840
    x9 : 0000000000003580 x8 : 000000000000009d
    x7 : 0000000000000002 x6 : ffffff8012e6b860
    x5 : 000000007cd66ffe x4 : 000000009742a193
    x3 : ffffff800865b4d8 x2 : ffffff8012e6b910
    x1 : 0000000000000400 x0 : ffffffc42c38f300
    Call trace:
     cls_cgroup_classify+0x80/0xec [cls_cgroup]
     tcf_classify+0x78/0x138
     htb_enqueue+0x74/0x320 [sch_htb]
     __dev_queue_xmit+0x3e4/0x9d0
     dev_queue_xmit+0x24/0x30
     ip_finish_output2+0x2e4/0x4d0
     ip_finish_output+0x1d8/0x270
     ip_mc_output+0xa8/0x240
     ip_local_out+0x58/0x68
     ip_send_skb+0x2c/0x88
     ip_push_pending_frames+0x44/0x50
     raw_sendmsg+0x458/0x830
     inet_sendmsg+0x54/0xe8
     sock_sendmsg+0x34/0x50
     __sys_sendto+0xd0/0x120
     __arm64_sys_sendto+0x30/0x40
     el0_svc_common.constprop.0+0x88/0xf8
     el0_svc_handler+0x2c/0x38
     el0_svc+0x8/0xc
    Code: 39496001 360002a1 b9425c14 34000274 (79405260)

Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: bas_gigaset: use usb_fill_int_urb() properly

The switch to make bas_gigaset use usb_fill_int_urb() - instead of
filling that urb "by hand" - missed the subtle ordering of the previous
code.

See, before the switch urb->dev was set to a member somewhere deep in a
complicated structure and then supplied to usb_rcvisocpipe() and
usb_sndisocpipe(). After that switch urb->dev wasn't set to anything
specific before being supplied to those two macros. This triggers a
nasty oops:

    BUG: unable to handle kernel NULL pointer dereference at 00000000
    #PF error: [normal kernel read fault]
    *pde = 00000000
    Oops: 0000 [#1] SMP
    CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc4.1.local0.fc28.i686 #1
    Hardware name: IBM 2525FAG/2525FAG, BIOS 74ET64WW (2.09 ) 12/14/2006
    EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
    Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
    EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: f30c9f20
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
    CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
    Call Trace:
     <SOFTIRQ>
     ? gigaset_isdn_connD+0xf6/0x140 [gigaset]
     gigaset_handle_event+0x173e/0x1b90 [gigaset]
     tasklet_action_common.isra.16+0x4e/0xf0
     tasklet_action+0x1e/0x20
     __do_softirq+0xb2/0x293
     ? __irqentry_text_end+0x3/0x3
     call_on_stack+0x45/0x50
     </SOFTIRQ>
     ? irq_exit+0xb5/0xc0
     ? do_IRQ+0x78/0xd0
     ? acpi_idle_enter_s2idle+0x50/0x50
     ? common_interrupt+0xd4/0xdc
     ? acpi_idle_enter_s2idle+0x50/0x50
     ? sched_cpu_activate+0x1b/0xf0
     ? acpi_fan_resume.cold.7+0x9/0x18
     ? cpuidle_enter_state+0x152/0x4c0
     ? cpuidle_enter+0x14/0x20
     ? call_cpuidle+0x21/0x40
     ? do_idle+0x1c8/0x200
     ? cpu_startup_entry+0x25/0x30
     ? rest_init+0x88/0x8a
     ? arch_call_rest_init+0xd/0x19
     ? start_kernel+0x42f/0x448
     ? i386_start_kernel+0xac/0xb0
     ? startup_32_smp+0x164/0x168
    Modules linked in: ppp_generic slhc capi bas_gigaset gigaset kernelcapi nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables sunrpc ipw2200 iTCO_wdt gpio_ich snd_intel8x0 libipw iTCO_vendor_support snd_ac97_codec lib80211 ppdev ac97_bus snd_seq cfg80211 snd_seq_device pcspkr thinkpad_acpi lpc_ich snd_pcm i2c_i801 snd_timer ledtrig_audio snd soundcore rfkill parport_pc parport pcc_cpufreq acpi_cpufreq i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sdhci_pci sysimgblt cqhci fb_sys_fops drm sdhci mmc_core tg3 ata_generic serio_raw yenta_socket pata_acpi video
    CR2: 0000000000000000
    ---[ end trace 1fe07487b9200c73 ]---
    EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
    Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
    EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: cddcb3bc
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
    CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
    Kernel panic - not syncing: Fatal exception in interrupt
    Kernel Offset: 0xcc00000 from 0xc0400000 (relocation range: 0xc0000000-0xf6ffdfff)
    ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

No-one noticed because this Oops is apparently only triggered by setting
up an ISDN data connection on a live ISDN line on a gigaset base (ie,
the PBX that the gigaset driver support). Very few people do that
running present day kernels.

Anyhow, a little code reorganization makes this problem go away, while
avoiding the subtle ordering that was used in the past. So let's do
that.

Fixes: 78c696c19578 ("isdn: gigaset: use usb_fill_int_urb()")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: fix phy_validate_pause

We have valid scenarios where ETHTOOL_LINK_MODE_Pause_BIT doesn't
need to be supported. Therefore extend the first check to check
for rx_pause being set.

See also phy_set_asym_pause:
rx=0 and tx=1: advertise asym pause only
rx=0 and tx=0: stop advertising both pause modes

The fixed commit isn't wrong, it's just the one that introduced the
linkmode bitmaps.

Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr_base: Do not reset index in mr_table_dump

e is the counter used to save the location of a dump when an
skb is filled. Once the walk of the table is complete, mr_table_dump
needs to return without resetting that index to 0. Dump of a specific
table is looping because of the reset because there is no way to
indicate the walk of the table is done.

Move the reset to the caller so the dump of each table starts at 0,
but the loop counter is maintained if a dump fills an skb.

Fixes: e1cedae1ba6b0 ("ipmr: Refactor mr_rtm_dumproute")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_matchall: avoid panic when receiving a packet before filter set

When a matchall classifier is added, there is a small time interval in
which tp->root is NULL. If we receive a packet in this small time slice
a NULL pointer dereference will happen, leading to a kernel panic:

    # tc qdisc replace dev eth0 ingress
    # tc filter add dev eth0 parent ffff: matchall action gact drop
    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000034
    Mem abort info:
      ESR = 0x96000005
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000005
      CM = 0, WnR = 0
    user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000a623d530
    [0000000000000034] pgd=0000000000000000, pud=0000000000000000
    Internal error: Oops: 96000005 [#1] SMP
    Modules linked in: cls_matchall sch_ingress nls_iso8859_1 nls_cp437 vfat fat m25p80 spi_nor mtd xhci_plat_hcd xhci_hcd phy_generic sfp mdio_i2c usbcore i2c_mv64xxx marvell10g mvpp2 usb_common spi_orion mvmdio i2c_core sbsa_gwdt phylink ip_tables x_tables autofs4
    Process ksoftirqd/0 (pid: 9, stack limit = 0x0000000009de7d62)
    CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 5.1.0-rc6 #21
    Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO)
    pc : mall_classify+0x28/0x78 [cls_matchall]
    lr : tcf_classify+0x78/0x138
    sp : ffffff80109db9d0
    x29: ffffff80109db9d0 x28: ffffffc426058800
    x27: 0000000000000000 x26: ffffffc425b0dd00
    x25: 0000000020000000 x24: 0000000000000000
    x23: ffffff80109dbac0 x22: 0000000000000001
    x21: ffffffc428ab5100 x20: ffffffc425b0dd00
    x19: ffffff80109dbac0 x18: 0000000000000000
    x17: 0000000000000000 x16: 0000000000000000
    x15: 0000000000000000 x14: 0000000000000000
    x13: ffffffbf108ad288 x12: dead000000000200
    x11: 00000000f0000000 x10: 0000000000000001
    x9 : ffffffbf1089a220 x8 : 0000000000000001
    x7 : ffffffbebffaa950 x6 : 0000000000000000
    x5 : 000000442d6ba000 x4 : 0000000000000000
    x3 : ffffff8008735ad8 x2 : ffffff80109dbac0
    x1 : ffffffc425b0dd00 x0 : ffffff8010592078
    Call trace:
     mall_classify+0x28/0x78 [cls_matchall]
     tcf_classify+0x78/0x138
     __netif_receive_skb_core+0x29c/0xa20
     __netif_receive_skb_one_core+0x34/0x60
     __netif_receive_skb+0x28/0x78
     netif_receive_skb_internal+0x2c/0xc0
     napi_gro_receive+0x1a0/0x1d8
     mvpp2_poll+0x928/0xb18 [mvpp2]
     net_rx_action+0x108/0x378
     __do_softirq+0x128/0x320
     run_ksoftirqd+0x44/0x60
     smpboot_thread_fn+0x168/0x1b0
     kthread+0x12c/0x130
     ret_from_fork+0x10/0x1c
    Code: aa0203f3 aa1e03e0 d503201f f9400684 (b9403480)
    ---[ end trace fc71e2ef7b8ab5a5 ]---
    Kernel panic - not syncing: Fatal exception in interrupt
    SMP: stopping secondary CPUs
    Kernel Offset: disabled
    CPU features: 0x002,00002000
    Memory Limit: none
    Rebooting in 1 seconds..

Fix this by adding a NULL check in mall_classify().

Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit

Commit cd9ff4de0107 changed the key for IFF_POINTOPOINT devices to
INADDR_ANY but neigh_xmit which is used for MPLS encapsulations was not
updated to use the altered key. The result is that every packet Tx does
a lookup on the gateway address which does not find an entry, a new one
is created only to find the existing one in the table right before the
insert since arp_constructor was updated to reset the primary key. This
is seen in the allocs and destroys counters:
ip -s -4 ntable show | head -10 | grep alloc

which increase for each packet showing the unnecessary overhread.

Fix by having neigh_xmit use __ipv4_neigh_lookup_noref for NEIGH_ARP_TABLE.

Fixes: cd9ff4de0107 ("ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY")
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

neighbor: Reset gc_entries counter if new entry is released before insert

Ian and Alan both reported seeing overflows after upgrades to 5.x kernels:
neighbour: arp_cache: neighbor table overflow!

Alan's mpls script helped get to the bottom of this bug. When a new entry
is created the gc_entries counter is bumped in neigh_alloc to check if a
new one is allowed to be created. ___neigh_create then searches for an
existing entry before inserting the just allocated one. If an entry
already exists, the new one is dropped in favor of the existing one. In
this case the cleanup path needs to drop the gc_entries counter. There
is no memory leak, only a counter leak.

Fixes: 58956317c8d ("neighbor: Improve garbage collection")
Reported-by: Ian Kumlien <ian.kumlien@gmail.com>
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ena-fixes'

Sameeh Jubran says:

====================
Bug fixes for ENA Ethernet driver

Sameeh Jubran (8):
  net: ena: fix swapped parameters when calling
    ena_com_indirect_table_fill_entry
  net: ena: fix: set freed objects to NULL to avoid failing future
    allocations
  net: ena: fix: Free napi resources when ena_up() fails
  net: ena: fix incorrect test of supported hash function
  net: ena: fix return value of ena_com_config_llq_info()
  net: ena: improve latency by disabling adaptive interrupt moderation
    by default
  net: ena: fix ena_com_fill_hash_function() implementation
  net: ena: gcc 8: fix compilation warning
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: gcc 8: fix compilation warning

GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.

In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.

This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:

https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix ena_com_fill_hash_function() implementation

ena_com_fill_hash_function() didn't configure the rss->hash_func.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: improve latency by disabling adaptive interrupt moderation by default

Adaptive interrupt moderation was erroneously enabled by default
in the driver.

In case the device supports adaptive interrupt moderation it will
be automatically used, which may potentially increase latency.

The adaptive moderation can be enabled from ethtool command in
case the feature is supported by the device.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Guy Tzalik <gtzalik@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix return value of ena_com_config_llq_info()

ena_com_config_llq_info() returns 0 even if ena_com_set_llq() fails.
Return the failure code of ena_com_set_llq() in case it fails.

fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com")

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix incorrect test of supported hash function

ena_com_set_hash_function() tests if a hash function is supported
by the device before setting it.
The test returns the opposite result than needed.
Reverse the condition to return the correct value.
Also use the BIT macro instead of inline shift.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix: Free napi resources when ena_up() fails

ena_up() calls ena_init_napi() but does not call ena_del_napi() in
case of failure. This causes a segmentation fault upon rmmod when
netif_napi_del() is called. Fix this bug by calling ena_del_napi()
before returning error from ena_up().

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix: set freed objects to NULL to avoid failing future allocations

In some cases when a queue related allocation fails, successful past
allocations are freed but the pointer that pointed to them is not
set to NULL. This is a problem for 2 reasons:
1. This is generally a bad practice since this pointer might be
accidentally accessed in the future.
2. Future allocations using the same pointer check if the pointer
is NULL and fail if it is not.

Fixed this by setting such pointers to NULL in the allocation of
queue related objects.

Also refactored the code of ena_setup_tx_resources() to goto-style
error handling to avoid code duplication of resource freeing.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entry

second parameter should be the index of the table rather than the value.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Saeed Bshara <saeedb@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: fix race that may miss tx queue wakeup

When the ring buffer is almost full due to RX completion messages, a
TX packet may reach the "low watermark" and cause the queue stopped.
If the TX completion arrives earlier than queue stopping, the wakeup
may be missed.

This patch moves the check for the last pending packet to cover both
EAGAIN and success cases, so the queue will be reliably waked up when
necessary.

Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Out of bounds access in xfrm IPSEC policy unlink, from Yue Haibing.

2) Missing length check for esp4 UDP encap, from Sabrina Dubroca.

3) Fix byte order of RX STBC access in mac80211, from Johannes Berg.

4) Inifnite loop in bpftool map create, from Alban Crequy.

5) Register mark fix in ebpf verifier after pkt/null checks, from Paul
    Chaignon.

6) Properly use rcu_dereference_sk_user_data in L2TP code, from Eric
    Dumazet.

7) Buffer overrun in marvell phy driver, from Andrew Lunn.

8) Several crash and statistics handling fixes to bnxt_en driver, from
    Michael Chan and Vasundhara Volam.

9) Several fixes to the TLS layer from Jakub Kicinski (copying negative
    amounts of data in reencrypt, reencrypt frag copying, blind nskb->sk
    NULL deref, etc).

10) Several UDP GRO fixes, from Paolo Abeni and Eric Dumazet.

11) PID/UID checks on ipv6 flow labels are inverted, from Willem de
    Bruijn.

12) Use after free in l2tp, from Eric Dumazet.

13) IPV6 route destroy races, also from Eric Dumazet.

14) SCTP state machine can erroneously run recursively, fix from Xin
    Long.

15) Adjust AF_PACKET msg_name length checks, add padding bytes if
    necessary. From Willem de Bruijn.

16) Preserve skb_iif, so that forwarded packets have consistent values
    even if fragmentation is involved. From Shmulik Ladkani.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  udp: fix GRO packet of death
  ipv6: A few fixes on dereferencing rt->from
  rds: ib: force endiannes annotation
  selftests: fib_rule_tests: print the result and return 1 if any tests failed
  ipv4: ip_do_fragment: Preserve skb_iif during fragmentation
  net/tls: avoid NULL pointer deref on nskb->sk in fallback
  selftests: fib_rule_tests: Fix icmp proto with ipv6
  packet: validate msg_namelen in send directly
  packet: in recvmsg msg_name return at least sizeof sockaddr_ll
  sctp: avoid running the sctp state machine recursively
  stmmac: pci: Fix typo in IOT2000 comment
  Documentation: fix netdev-FAQ.rst markup warning
  ipv6: fix races in ip6_dst_destroy()
  l2ip: fix possible use-after-free
  appletalk: Set error code if register_snap_client failed
  net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc
  rxrpc: Fix net namespace cleanup
  ipv6/flowlabel: wait rcu grace period before put_pid()
  vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach
  tcp: add sanity tests in tcp_add_backlog()
  ...

Merge tag 'for-linus-20190502' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"This is mostly io_uring fixes/tweaks. Most of these were actually done
  in time for the last -rc, but I wanted to ensure that everything
  tested out great before including them. The code delta looks larger
  than it really is, as it's mostly just comment additions/changes.

  Outside of the comment additions/changes, this is mostly removal of
  unnecessary barriers. In all, this pull request contains:

   - Tweak to how we handle errors at submission time. We now post a
     completion event if the error occurs on behalf of an sqe, instead
     of returning it through the system call. If the error happens
     outside of a specific sqe, we return the error through the system
     call. This makes it nicer to use and makes the "normal" use case
     behave the same as the offload cases. (me)

   - Fix for a missing req reference drop from async context (me)

   - If an sqe is submitted with RWF_NOWAIT, don't punt it to async
     context. Return -EAGAIN directly, instead of using it as a hint to
     do async punt. (Stefan)

   - Fix notes on barriers (Stefan)

   - Remove unnecessary barriers (Stefan)

   - Fix potential double free of memory in setup error (Mark)

   - Further improve sq poll CPU validation (Mark)

   - Fix page allocation warning and leak on buffer registration error
     (Mark)

   - Fix iov_iter_type() for new no-ref flag (Ming)

   - Fix a case where dio doesn't honor bio no-page-ref (Ming)"

* tag 'for-linus-20190502' of git://git.kernel.dk/linux-block:
  io_uring: avoid page allocation warnings
  iov_iter: fix iov_iter_type
  block: fix handling for BIO_NO_PAGE_REF
  io_uring: drop req submit reference always in async punt
  io_uring: free allocated io_memory once
  io_uring: fix SQPOLL cpu validation
  io_uring: have submission side sqe errors post a cqe
  io_uring: remove unnecessary barrier after unsetting IORING_SQ_NEED_WAKEUP
  io_uring: remove unnecessary barrier after incrementing dropped counter
  io_uring: remove unnecessary barrier before reading SQ tail
  io_uring: remove unnecessary barrier after updating SQ head
  io_uring: remove unnecessary barrier before reading cq head
  io_uring: remove unnecessary barrier before wq_has_sleeper
  io_uring: fix notes on barriers
  io_uring: fix handling SQEs requesting NOWAIT

Merge tag 'pci-v5.1-fixes-3' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
"I apologize for sending these so late in the cycle. We went back and
  forth about how to deal with the unexpected logging of intentional
  link state changes and finally decided to just config them off by
  default.

  PCI fixes:

   - Stop ignoring "pci=disable_acs_redir" parameter (Logan Gunthorpe)

   - Use shared MSI/MSI-X vector for Link Bandwidth Management (Alex
     Williamson)

   - Add Kconfig option for Link Bandwidth notification messages (Keith
     Busch)"

* tag 'pci-v5.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/LINK: Add Kconfig option (default off)
  PCI/portdrv: Use shared MSI/MSI-X vector for Bandwidth Management
  PCI: Fix issue with "pci=disable_acs_redir" parameter being ignored

Merge tag 'mtd/fixes-for-5.1-rc6' of git://git./linux/kernel/git/mtd/linux

Pull MTD fix from Richard Weinberger:
"A single regression fix for the marvell nand driver"

* tag 'mtd/fixes-for-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: marvell: Clean the controller state before each operation

PCI/LINK: Add Kconfig option (default off)

e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth
notification") added dmesg logging whenever a link changes speed or width
to a state that is considered degraded.  Unfortunately, it cannot
differentiate signal integrity-related link changes from those
intentionally initiated by an endpoint driver, including drivers that may
live in userspace or VMs when making use of vfio-pci.  Some GPU drivers
actively manage the link state to save power, which generates a stream of
messages like this:

  vfio-pci 0000:07:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)

Since we can't distinguish the intentional changes from the signal
integrity issues, leave the reporting turned off by default.  Add a Kconfig
option to turn it on if desired.

Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification")
Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

udp: fix GRO packet of death

syzbot was able to crash host by sending UDP packets with a 0 payload.

TCP does not have this issue since we do not aggregate packets without
payload.

Since dev_gro_receive() sets gso_size based on skb_gro_len(skb)
it seems not worth trying to cope with padded packets.

BUG: KASAN: slab-out-of-bounds in skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826
Read of size 16 at addr ffff88808893fff0 by task syz-executor612/7889

CPU: 0 PID: 7889 Comm: syz-executor612 Not tainted 5.1.0-rc7+ #96
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_load16_noabort+0x14/0x20 mm/kasan/generic_report.c:133
skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826
udp_gro_receive_segment net/ipv4/udp_offload.c:382 [inline]
call_gro_receive include/linux/netdevice.h:2349 [inline]
udp_gro_receive+0xb61/0xfd0 net/ipv4/udp_offload.c:414
udp4_gro_receive+0x763/0xeb0 net/ipv4/udp_offload.c:478
inet_gro_receive+0xe72/0x1110 net/ipv4/af_inet.c:1510
dev_gro_receive+0x1cd0/0x23c0 net/core/dev.c:5581
napi_gro_frags+0x36b/0xd10 net/core/dev.c:5843
tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981
tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027
call_write_iter include/linux/fs.h:1866 [inline]
do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681
do_iter_write fs/read_write.c:957 [inline]
do_iter_write+0x184/0x610 fs/read_write.c:938
vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002
do_writev+0x15e/0x370 fs/read_write.c:1037
__do_sys_writev fs/read_write.c:1110 [inline]
__se_sys_writev fs/read_write.c:1107 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1107
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441cc0
Code: 05 48 3d 01 f0 ff ff 0f 83 9d 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 3d 51 93 29 00 00 75 14 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 74 09 fc ff c3 48 83 ec 08 e8 ba 2b 00 00
RSP: 002b:00007ffe8c716118 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007ffe8c716150 RCX: 0000000000441cc0
RDX: 0000000000000001 RSI: 00007ffe8c716170 RDI: 00000000000000f0
RBP: 0000000000000000 R08: 000000000000ffff R09: 0000000000a64668
R10: 0000000020000040 R11: 0000000000000246 R12: 000000000000c2d9
R13: 0000000000402b50 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 5143:
save_stack+0x45/0xd0 mm/kasan/common.c:75
set_track mm/kasan/common.c:87 [inline]
__kasan_kmalloc mm/kasan/common.c:497 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505
slab_post_alloc_hook mm/slab.h:437 [inline]
slab_alloc mm/slab.c:3393 [inline]
kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555
mm_alloc+0x1d/0xd0 kernel/fork.c:1030
bprm_mm_init fs/exec.c:363 [inline]
__do_execve_file.isra.0+0xaa3/0x23f0 fs/exec.c:1791
do_execveat_common fs/exec.c:1865 [inline]
do_execve fs/exec.c:1882 [inline]
__do_sys_execve fs/exec.c:1958 [inline]
__se_sys_execve fs/exec.c:1953 [inline]
__x64_sys_execve+0x8f/0xc0 fs/exec.c:1953
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5351:
save_stack+0x45/0xd0 mm/kasan/common.c:75
set_track mm/kasan/common.c:87 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:459
kasan_slab_free+0xe/0x10 mm/kasan/common.c:467
__cache_free mm/slab.c:3499 [inline]
kmem_cache_free+0x86/0x260 mm/slab.c:3765
__mmdrop+0x238/0x320 kernel/fork.c:677
mmdrop include/linux/sched/mm.h:49 [inline]
finish_task_switch+0x47b/0x780 kernel/sched/core.c:2746
context_switch kernel/sched/core.c:2880 [inline]
__schedule+0x81b/0x1cc0 kernel/sched/core.c:3518
preempt_schedule_irq+0xb5/0x140 kernel/sched/core.c:3745
retint_kernel+0x1b/0x2d
arch_local_irq_restore arch/x86/include/asm/paravirt.h:767 [inline]
kmem_cache_free+0xab/0x260 mm/slab.c:3766
anon_vma_chain_free mm/rmap.c:134 [inline]
unlink_anon_vmas+0x2ba/0x870 mm/rmap.c:401
free_pgtables+0x1af/0x2f0 mm/memory.c:394
exit_mmap+0x2d1/0x530 mm/mmap.c:3144
__mmput kernel/fork.c:1046 [inline]
mmput+0x15f/0x4c0 kernel/fork.c:1067
exec_mmap fs/exec.c:1046 [inline]
flush_old_exec+0x8d9/0x1c20 fs/exec.c:1279
load_elf_binary+0x9bc/0x53f0 fs/binfmt_elf.c:864
search_binary_handler fs/exec.c:1656 [inline]
search_binary_handler+0x17f/0x570 fs/exec.c:1634
exec_binprm fs/exec.c:1698 [inline]
__do_execve_file.isra.0+0x1394/0x23f0 fs/exec.c:1818
do_execveat_common fs/exec.c:1865 [inline]
do_execve fs/exec.c:1882 [inline]
__do_sys_execve fs/exec.c:1958 [inline]
__se_sys_execve fs/exec.c:1953 [inline]
__x64_sys_execve+0x8f/0xc0 fs/exec.c:1953
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff88808893f7c0
which belongs to the cache mm_struct of size 1496
The buggy address is located 600 bytes to the right of
1496-byte region [ffff88808893f7c0, ffff88808893fd98)
The buggy address belongs to the page:
page:ffffea0002224f80 count:1 mapcount:0 mapping:ffff88821bc40ac0 index:0xffff88808893f7c0 compound_mapcount: 0
flags: 0x1fffc0000010200(slab|head)
raw: 01fffc0000010200 ffffea00025b4f08 ffffea00027b9d08 ffff88821bc40ac0
raw: ffff88808893f7c0 ffff88808893e440 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88808893fe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88808893ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808893ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888088940000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888088940080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-v5.1-rc' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from Sebastian Reichel:
"Two more fixes for the 5.1 cycle.

  One division by zero fix in a specific driver and one core workaround
  for bad userspace behaviour from systemd regarding uevents. IMHO this
  can be considered to be a userspace bug, but the debug messages are
  useless anyways

   - cpcap-battery: fix a division by zero

   - core: fix systemd issue due to log messages produced by uevent"

* tag 'for-v5.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUG
  power: supply: cpcap-battery: Fix division by zero

bpf, x32: Fix bug for BPF_ALU64 | BPF_NEG

The current implementation has two errors:

1: The second xor instruction will clear carry flag which
is necessary for following sbb instruction.
2: The select coding for sbb instruction is wrong, the coding
is "sbb dreg_hi,ecx", but what we need is "sbb ecx,dreg_hi".

This patch rewrites the implementation and fixes the errors.

This patch fixes below errors reported by bpf/test_verifier in x32
platform when the jit is enabled:

"
0: (b4) w1 = 4
1: (b4) w2 = 4
2: (1f) r2 -= r1
3: (4f) r2 |= r1
4: (87) r2 = -r2
5: (c7) r2 s>>= 63
6: (5f) r1 &= r2
7: (bf) r0 = r1
8: (95) exit
processed 9 insns (limit 131072), stack depth 0
0: (b4) w1 = 4
1: (b4) w2 = 4
2: (1f) r2 -= r1
3: (4f) r2 |= r1
4: (87) r2 = -r2
5: (c7) r2 s>>= 63
6: (5f) r1 &= r2
7: (bf) r0 = r1
8: (95) exit
processed 9 insns (limit 131072), stack depth 0
......
Summary: 1189 PASSED, 125 SKIPPED, 15 FAILED
"

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf, x32: Fix bug for BPF_JMP | {BPF_JSGT, BPF_JSLE, BPF_JSLT, BPF_JSGE}

The current method to compare 64-bit numbers for conditional jump is:

1) Compare the high 32-bit first.

2) If the high 32-bit isn't the same, then goto step 4.

3) Compare the low 32-bit.

4) Check the desired condition.

This method is right for unsigned comparison, but it is buggy for signed
comparison, because it does signed comparison for low 32-bit too.

There is only one sign bit in 64-bit number, that is the MSB in the 64-bit
number, it is wrong to treat low 32-bit as signed number and do the signed
comparison for it.

This patch fixes the bug and adds a testcase in selftests/bpf for such bug.

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

ipv6: A few fixes on dereferencing rt->from

It is a followup after the fix in
commit 9c69a1320515 ("route: Avoid crash from dereferencing NULL rt->from")

rt6_do_redirect():
1. NULL checking is needed on rt->from because a parallel
   fib6_info delete could happen that sets rt->from to NULL.
   (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()).

2. fib6_info_hold() is not enough.  Same reason as (1).
   Meaning, holding dst->__refcnt cannot ensure
   rt->from is not NULL or rt->from->fib6_ref is not 0.

   Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc()
   is already doing, this patch chooses to extend the rcu section
   to keep "from" dereference-able after checking for NULL.

inet6_rtm_getroute():
1. NULL checking is also needed on rt->from for a similar reason.
   Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED.

Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rds: ib: force endiannes annotation

While the endiannes is being handled correctly as indicated by the comment
above the offending line - sparse was unhappy with the missing annotation
as be64_to_cpu() expects a __be64 argument. To mitigate this annotation
all involved variables are changed to a consistent __le64 and the
conversion to uint64_t delayed to the call to rds_cong_map_updated().

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'arc-5.1-final' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
"A few minor fixes for ARC.

   - regression in memset if line size !64

   - avoid panic if PAE and IOC"

* tag 'arc-5.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: memset: fix build with L1_CACHE_SHIFT != 6
  ARC: [hsdk] Make it easier to add PAE40 region to DTB
  ARC: PAE40: don't panic and instead turn off hw ioc

PCI/portdrv: Use shared MSI/MSI-X vector for Bandwidth Management

The Interrupt Message Number in the PCIe Capabilities register (PCIe r4.0,
sec 7.5.3.2) indicates which MSI/MSI-X vector is shared by interrupts
related to the PCIe Capability, including Link Bandwidth Management and
Link Autonomous Bandwidth Interrupts (Link Control, 7.5.3.7), Command
Completed and Hot-Plug Interrupts (Slot Control, 7.5.3.10), and the PME
Interrupt (Root Control, 7.5.3.12).

pcie_message_numbers() checked whether we want to enable PME or Hot-Plug
interrupts but neglected to check for Link Bandwidth Management, so if we
only wanted the Bandwidth Management interrupts, it decided we didn't need
any vectors at all. Then pcie_port_enable_irq_vec() tried to reallocate
zero vectors, which failed, resulting in fallback to INTx.

On some systems, e.g., an X79-based workstation, that INTx seems broken or
not handled correctly, so we got spurious IRQ16 interrupts for Bandwidth
Management events.

Change pcie_message_numbers() so that if we want Link Bandwidth Management
interrupts, we use the shared MSI/MSI-X vector from the PCIe Capabilities
register.

Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification")
Link: https://lore.kernel.org/lkml/155597243666.19387.1205950870601742062.stgit@gimli.home
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Merge tag 'acpi-5.1-rc8' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"Revert a recent ACPICA change that caused initialization to fail on
systems with Thunderbolt docking stations connected at the init time"

* tag 'acpi-5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Clear status of GPEs before enabling them"

gcc-9: don't warn about uninitialized btrfs extent_type variable

The 'extent_type' variable does seem to be reliably initialized, but
it's _very_ non-obvious, since there's a "goto next" case that jumps
over the normal initialization. That will then always trigger the
"start >= extent_end" test, which will end up never falling through to
the use of that variable.

But the code is certainly not obvious, and the compiler warning looks
reasonable. Make 'extent_type' an int, and initialize it to an invalid
negative value, which seems to be the common pattern in other places.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests: fib_rule_tests: print the result and return 1 if any tests failed

Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc-9: properly declare the {pv,hv}clock_page storage

The pvlock_page and hvclock_page variables are (as the name implies)
addresses to pages, created by the linker script.

But we declared them as just "extern u8" variables, which _works_, but
now that gcc does some more bounds checking, it causes warnings like

warning: array subscript 1 is outside array bounds of ‘u8[1]’

when we then access more than one byte from those variables.

Fix this by simply making the declaration of the variables match
reality, which makes the compiler happy too.

Signed-off-by: Linus Torvalds <torvalds@-linux-foundation.org>

gcc-9: don't warn about uninitialized variable

I'm not sure what made gcc warn about this code now. The 'ret' variable
does end up initialized in all cases, but it's definitely not obvious,
so the compiler is quite reasonable to warn about this.

So just add initialization to make it all much more obvious both to
compilers and to humans.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-9: silence 'address-of-packed-member' warning

We already did this for clang, but now gcc has that warning too. Yes,
yes, the address may be unaligned. And that's kind of the point.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipv4: ip_do_fragment: Preserve skb_iif during fragmentation

Previously, during fragmentation after forwarding, skb->skb_iif isn't
preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given
'from' skb.

As a result, ip_do_fragment's creates fragments with zero skb_iif,
leading to inconsistent behavior.

Assume for example an eBPF program attached at tc egress (post
forwarding) that examines __sk_buff->ingress_ifindex:
- the correct iif is observed if forwarding path does not involve
fragmentation/refragmentation
- a bogus iif is observed if forwarding path involves
fragmentation/refragmentatiom

Fix, by preserving skb_iif during 'ip_copy_metadata'.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

io_uring: avoid page allocation warnings

In io_sqe_buffer_register() we allocate a number of arrays based on the
iov_len from the user-provided iov. While we limit iov_len to SZ_1G,
we can still attempt to allocate arrays exceeding MAX_ORDER.

On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and
iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to
allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320
bytes, which is greater than 4MiB. This results in SLUB warning that
we're trying to allocate greater than MAX_ORDER, and failing the
allocation.

Avoid this by using kvmalloc() for allocations dependent on the
user-provided iov_len. At the same time, fix a leak of imu->bvec when
registration fails.

Full splat from before this patch:

WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193
show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x110/0x190 lib/dump_stack.c:113
panic+0x384/0x68c kernel/panic.c:214
__warn+0x2bc/0x2c0 kernel/panic.c:571
report_bug+0x228/0x2d8 lib/bug.c:186
bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956
call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline]
brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316
do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831
el1_dbg+0x18/0x8c
__alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595
alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132
alloc_pages include/linux/gfp.h:509 [inline]
kmalloc_order+0x20/0x50 mm/slab_common.c:1231
kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243
kmalloc_large include/linux/slab.h:480 [inline]
__kmalloc+0x3dc/0x4f0 mm/slub.c:3791
kmalloc_array include/linux/slab.h:670 [inline]
io_sqe_buffer_register fs/io_uring.c:2472 [inline]
__io_uring_register fs/io_uring.c:2962 [inline]
__do_sys_io_uring_register fs/io_uring.c:3008 [inline]
__se_sys_io_uring_register fs/io_uring.c:2990 [inline]
__arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:47 [inline]
el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83
el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129
el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948
SMP: stopping secondary CPUs
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
CPU features: 0x002,23000438
Memory Limit: none
Rebooting in 1 seconds..

Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

net/tls: avoid NULL pointer deref on nskb->sk in fallback

update_chksum() accesses nskb->sk before it has been set
by complete_skb(), move the init up.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: fib_rule_tests: Fix icmp proto with ipv6

A recent commit returns an error if icmp is used as the ip-proto for
IPv6 fib rules. Update fib_rule_tests to send ipv6-icmp instead of icmp.

Fixes: 5e1a99eae8499 ("ipv4: Add ICMPv6 support when parse route ipproto")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

packet: validate msg_namelen in send directly

Packet sockets in datagram mode take a destination address. Verify its
length before passing to dev_hard_header.

Prior to 2.6.14-rc3, the send code ignored sll_halen. This is
established behavior. Directly compare msg_namelen to dev->addr_len.

Change v1->v2: initialize addr in all paths

Fixes: 6b8d95f1795c4 ("packet: validate address length if non-zero")
Suggested-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

packet: in recvmsg msg_name return at least sizeof sockaddr_ll

Packet send checks that msg_name is at least sizeof sockaddr_ll.
Packet recv must return at least this length, so that its output
can be passed unmodified to packet send.

This ceased to be true since adding support for lladdr longer than
sll_addr. Since, the return value uses true address length.

Always return at least sizeof sockaddr_ll, even if address length
is shorter. Zero the padding bytes.

Change v1->v2: do not overwrite zeroed padding again. use copy_len.

Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.")
Suggested-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

iov_iter: fix iov_iter_type

Commit 875f1d0769cd ("iov_iter: add ITER_BVEC_FLAG_NO_REF flag")
introduces one extra flag of ITER_BVEC_FLAG_NO_REF, and this flag
is stored into iter->type.

However, iov_iter_type() doesn't consider the new added flag, fix
it by masking this flag in iov_iter_type().

Fixes: 875f1d0769cd ("iov_iter: add ITER_BVEC_FLAG_NO_REF flag")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix handling for BIO_NO_PAGE_REF

Commit 399254aaf489211 ("block: add BIO_NO_PAGE_REF flag") introduces
BIO_NO_PAGE_REF, and once this flag is set for one bio, all pages
in the bio won't be get/put during IO.

However, if one bio is submitted via __blkdev_direct_IO_simple(),
even though BIO_NO_PAGE_REF is set, pages still may be put.

Fixes this issue by avoiding to put pages if BIO_NO_PAGE_REF is
set.

Fixes: 399254aaf489211 ("block: add BIO_NO_PAGE_REF flag")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: drop req submit reference always in async punt

If we don't end up actually calling submit in io_sq_wq_submit_work(),
we still need to drop the submit reference to the request. If we
don't, then we can leak the request. This can happen if we race
with ring shutdown while flushing the workqueue for requests that
require use of the mm_struct.

Fixes: e65ef56db494 ("io_uring: use regular request ref counts")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: free allocated io_memory once

If io_allocate_scq_urings() fails to allocate an sq_* region, it will
call io_mem_free() for any previously allocated regions, but leave
dangling pointers to these regions in the ctx. Any regions which have
not yet been allocated are left NULL. Note that when returning
-EOVERFLOW, the previously allocated sq_ring is not freed, which appears
to be an unintentional leak.

When io_allocate_scq_urings() fails, io_uring_create() will call
io_ring_ctx_wait_and_kill(), which calls io_mem_free() on all the sq_*
regions, assuming the pointers are valid and not NULL.

This can result in pages being freed multiple times, which has been
observed to corrupt the page state, leading to subsequent fun. This can
also result in virt_to_page() on NULL, resulting in the use of bogus
page addresses, and yet more subsequent fun. The latter can be detected
with CONFIG_DEBUG_VIRTUAL on arm64.

Adding a cleanup path to io_allocate_scq_urings() complicates the logic,
so let's leave it to io_ring_ctx_free() to consistently free these
pointers, and simplify the io_allocate_scq_urings() error paths.

Full splats from before this patch below. Note that the pointer logged
by the DEBUG_VIRTUAL "non-linear address" warning has been hashed, and
is actually NULL.

[   26.098129] page:ffff80000e949a00 count:0 mapcount:-128 mapping:0000000000000000 index:0x0
[   26.102976] flags: 0x63fffc000000()
[   26.104373] raw: 000063fffc000000 ffff80000e86c188 ffff80000ea3df08 0000000000000000
[   26.108917] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000
[   26.137235] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
[   26.143960] ------------[ cut here ]------------
[   26.146020] kernel BUG at include/linux/mm.h:547!
[   26.147586] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   26.149163] Modules linked in:
[   26.150287] Process syz-executor.21 (pid: 20204, stack limit = 0x000000000e9cefeb)
[   26.153307] CPU: 2 PID: 20204 Comm: syz-executor.21 Not tainted 5.1.0-rc7-00004-g7d30b2ea43d6 #18
[   26.156566] Hardware name: linux,dummy-virt (DT)
[   26.158089] pstate: 40400005 (nZcv daif +PAN -UAO)
[   26.159869] pc : io_mem_free+0x9c/0xa8
[   26.161436] lr : io_mem_free+0x9c/0xa8
[   26.162720] sp : ffff000013003d60
[   26.164048] x29: ffff000013003d60 x28: ffff800025048040
[   26.165804] x27: 0000000000000000 x26: ffff800025048040
[   26.167352] x25: 00000000000000c0 x24: ffff0000112c2820
[   26.169682] x23: 0000000000000000 x22: 0000000020000080
[   26.171899] x21: ffff80002143b418 x20: ffff80002143b400
[   26.174236] x19: ffff80002143b280 x18: 0000000000000000
[   26.176607] x17: 0000000000000000 x16: 0000000000000000
[   26.178997] x15: 0000000000000000 x14: 0000000000000000
[   26.181508] x13: 00009178a5e077b2 x12: 0000000000000001
[   26.183863] x11: 0000000000000000 x10: 0000000000000980
[   26.186437] x9 : ffff000013003a80 x8 : ffff800025048a20
[   26.189006] x7 : ffff8000250481c0 x6 : ffff80002ffe9118
[   26.191359] x5 : ffff80002ffe9118 x4 : 0000000000000000
[   26.193863] x3 : ffff80002ffefe98 x2 : 44c06ddd107d1f00
[   26.196642] x1 : 0000000000000000 x0 : 000000000000003e
[   26.198892] Call trace:
[   26.199893]  io_mem_free+0x9c/0xa8
[   26.201155]  io_ring_ctx_wait_and_kill+0xec/0x180
[   26.202688]  io_uring_setup+0x6c4/0x6f0
[   26.204091]  __arm64_sys_io_uring_setup+0x18/0x20
[   26.205576]  el0_svc_common.constprop.0+0x7c/0xe8
[   26.207186]  el0_svc_handler+0x28/0x78
[   26.208389]  el0_svc+0x8/0xc
[   26.209408] Code: aa0203e0 d0006861 9133a021 97fcdc3c (d4210000)
[   26.211995] ---[ end trace bdb81cd43a21e50d ]---

[   81.770626] ------------[ cut here ]------------
[   81.825015] virt_to_phys used for non-linear address: 000000000d42f2c7 (          (null))
[   81.827860] WARNING: CPU: 1 PID: 30171 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x48/0x68
[   81.831202] Modules linked in:
[   81.832212] CPU: 1 PID: 30171 Comm: syz-executor.20 Not tainted 5.1.0-rc7-00004-g7d30b2ea43d6 #19
[   81.835616] Hardware name: linux,dummy-virt (DT)
[   81.836863] pstate: 60400005 (nZCv daif +PAN -UAO)
[   81.838727] pc : __virt_to_phys+0x48/0x68
[   81.840572] lr : __virt_to_phys+0x48/0x68
[   81.842264] sp : ffff80002cf67c70
[   81.843858] x29: ffff80002cf67c70 x28: ffff800014358e18
[   81.846463] x27: 0000000000000000 x26: 0000000020000080
[   81.849148] x25: 0000000000000000 x24: ffff80001bb01f40
[   81.851986] x23: ffff200011db06c8 x22: ffff2000127e3c60
[   81.854351] x21: ffff800014358cc0 x20: ffff800014358d98
[   81.856711] x19: 0000000000000000 x18: 0000000000000000
[   81.859132] x17: 0000000000000000 x16: 0000000000000000
[   81.861586] x15: 0000000000000000 x14: 0000000000000000
[   81.863905] x13: 0000000000000000 x12: ffff1000037603e9
[   81.866226] x11: 1ffff000037603e8 x10: 0000000000000980
[   81.868776] x9 : ffff80002cf67840 x8 : ffff80001bb02920
[   81.873272] x7 : ffff1000037603e9 x6 : ffff80001bb01f47
[   81.875266] x5 : ffff1000037603e9 x4 : dfff200000000000
[   81.876875] x3 : ffff200010087528 x2 : ffff1000059ecf58
[   81.878751] x1 : 44c06ddd107d1f00 x0 : 0000000000000000
[   81.880453] Call trace:
[   81.881164]  __virt_to_phys+0x48/0x68
[   81.882919]  io_mem_free+0x18/0x110
[   81.886585]  io_ring_ctx_wait_and_kill+0x13c/0x1f0
[   81.891212]  io_uring_setup+0xa60/0xad0
[   81.892881]  __arm64_sys_io_uring_setup+0x2c/0x38
[   81.894398]  el0_svc_common.constprop.0+0xac/0x150
[   81.896306]  el0_svc_handler+0x34/0x88
[   81.897744]  el0_svc+0x8/0xc
[   81.898715] ---[ end trace b4a703802243cbba ]---

Fixes: 2b188cc1bb857a9d ("Add io_uring IO interface")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-block@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix SQPOLL cpu validation

In io_sq_offload_start(), we call cpu_possible() on an unbounded cpu
value from userspace. On v5.1-rc7 on arm64 with
CONFIG_DEBUG_PER_CPU_MAPS, this results in a splat:

  WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 cpu_max_bits_warn include/linux/cpumask.h:121 [inline]

There was an attempt to fix this in commit:

  917257daa0fea7a0 ("io_uring: only test SQPOLL cpu after we've verified it")

... by adding a check after the cpu value had been limited to NR_CPU_IDS
using array_index_nospec(). However, this left an unbound check at the
start of the function, for which the warning still fires.

Let's fix this correctly by checking that the cpu value is bound by
nr_cpu_ids before passing it to cpu_possible(). Note that only
nr_cpu_ids of a cpumask are guaranteed to exist at runtime, and
nr_cpu_ids can be significantly smaller than NR_CPUs. For example, an
arm64 defconfig has NR_CPUS=256, while my test VM has 4 vCPUs.

Following the intent from the commit message for 917257daa0fea7a0, the
check is moved under the SQ_AFF branch, which is the only branch where
the cpu values is consumed. The check is performed before bounding the
value with array_index_nospec() so that we don't silently accept bogus
cpu values from userspace, where array_index_nospec() would force these
values to 0.

I suspect we can remove the array_index_nospec() call entirely, but I've
conservatively left that in place, updated to use nr_cpu_ids to match
the prior check.

Tested on arm64 with the Syzkaller reproducer:

  https://syzkaller.appspot.com/bug?extid=cd714a07c6de2bc34293
  https://syzkaller.appspot.com/x/repro.syz?x=15d8b397200000

Full splat from before this patch:

WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 cpu_max_bits_warn include/linux/cpumask.h:121 [inline]
WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 cpumask_check include/linux/cpumask.h:128 [inline]
WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 cpumask_test_cpu include/linux/cpumask.h:344 [inline]
WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 io_sq_offload_start fs/io_uring.c:2244 [inline]
WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 io_uring_create fs/io_uring.c:2864 [inline]
WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 io_uring_setup+0x1108/0x15a0 fs/io_uring.c:2916
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 27601 Comm: syz-executor.0 Not tainted 5.1.0-rc7 #3
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193
show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x110/0x190 lib/dump_stack.c:113
panic+0x384/0x68c kernel/panic.c:214
__warn+0x2bc/0x2c0 kernel/panic.c:571
report_bug+0x228/0x2d8 lib/bug.c:186
bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956
call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline]
brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316
do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831
el1_dbg+0x18/0x8c
cpu_max_bits_warn include/linux/cpumask.h:121 [inline]
cpumask_check include/linux/cpumask.h:128 [inline]
cpumask_test_cpu include/linux/cpumask.h:344 [inline]
io_sq_offload_start fs/io_uring.c:2244 [inline]
io_uring_create fs/io_uring.c:2864 [inline]
io_uring_setup+0x1108/0x15a0 fs/io_uring.c:2916
__do_sys_io_uring_setup fs/io_uring.c:2929 [inline]
__se_sys_io_uring_setup fs/io_uring.c:2926 [inline]
__arm64_sys_io_uring_setup+0x50/0x70 fs/io_uring.c:2926
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:47 [inline]
el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83
el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129
el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948
SMP: stopping secondary CPUs
Dumping ftrace buffer:
   (ftrace buffer empty)
Kernel Offset: disabled
CPU features: 0x002,23000438
Memory Limit: none
Rebooting in 1 seconds..

Fixes: 917257daa0fea7a0 ("io_uring: only test SQPOLL cpu after we've verified it")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-block@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Simplied the logic

Signed-off-by: Jens Axboe <axboe@kernel.dk>

sctp: avoid running the sctp state machine recursively

Ying triggered a call trace when doing an asconf testing:

  BUG: scheduling while atomic: swapper/12/0/0x10000100
  Call Trace:
   <IRQ>  [<ffffffffa4375904>] dump_stack+0x19/0x1b
   [<ffffffffa436fcaf>] __schedule_bug+0x64/0x72
   [<ffffffffa437b93a>] __schedule+0x9ba/0xa00
   [<ffffffffa3cd5326>] __cond_resched+0x26/0x30
   [<ffffffffa437bc4a>] _cond_resched+0x3a/0x50
   [<ffffffffa3e22be8>] kmem_cache_alloc_node+0x38/0x200
   [<ffffffffa423512d>] __alloc_skb+0x5d/0x2d0
   [<ffffffffc0995320>] sctp_packet_transmit+0x610/0xa20 [sctp]
   [<ffffffffc098510e>] sctp_outq_flush+0x2ce/0xc00 [sctp]
   [<ffffffffc098646c>] sctp_outq_uncork+0x1c/0x20 [sctp]
   [<ffffffffc0977338>] sctp_cmd_interpreter.isra.22+0xc8/0x1460 [sctp]
   [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp]
   [<ffffffffc099443d>] sctp_primitive_ASCONF+0x3d/0x50 [sctp]
   [<ffffffffc0977384>] sctp_cmd_interpreter.isra.22+0x114/0x1460 [sctp]
   [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp]
   [<ffffffffc097b3a4>] sctp_assoc_bh_rcv+0xf4/0x1b0 [sctp]
   [<ffffffffc09840f1>] sctp_inq_push+0x51/0x70 [sctp]
   [<ffffffffc099732b>] sctp_rcv+0xa8b/0xbd0 [sctp]

As it shows, the first sctp_do_sm() running under atomic context (NET_RX
softirq) invoked sctp_primitive_ASCONF() that uses GFP_KERNEL flag later,
and this flag is supposed to be used in non-atomic context only. Besides,
sctp_do_sm() was called recursively, which is not expected.

Vlad tried to fix this recursive call in Commit c0786693404c ("sctp: Fix
oops when sending queued ASCONF chunks") by introducing a new command
SCTP_CMD_SEND_NEXT_ASCONF. But it didn't work as this command is still
used in the first sctp_do_sm() call, and sctp_primitive_ASCONF() will
be called in this command again.

To avoid calling sctp_do_sm() recursively, we send the next queued ASCONF
not by sctp_primitive_ASCONF(), but by sctp_sf_do_prm_asconf() in the 1st
sctp_do_sm() directly.

Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: pci: Fix typo in IOT2000 comment

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation: fix netdev-FAQ.rst markup warning

Fix ReST underline warning:

./Documentation/networking/netdev-FAQ.rst:135: WARNING: Title underline too short.

Q: I made changes to only a few patches in a patch series should I resend only those changed?
--------------------------------------------------------------------------------------------

Fixes: ffa91253739c ("Documentation: networking: Update netdev-FAQ regarding patches")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

io_uring: have submission side sqe errors post a cqe

Currently we only post a cqe if we get an error OUTSIDE of submission.
For submission, we return the error directly through io_uring_enter().
This is a bit awkward for applications, and it makes more sense to
always post a cqe with an error, if the error happens on behalf of an
sqe.

This changes submission behavior a bit. io_uring_enter() returns -ERROR
for an error, and > 0 for number of sqes submitted. Before this change,
if you wanted to submit 8 entries and had an error on the 5th entry,
io_uring_enter() would return 4 (for number of entries successfully
submitted) and rewind the sqring. The application would then have to
peek at the sqring and figure out what was wrong with the head sqe, and
then skip it itself. With this change, we'll return 5 since we did
consume 5 sqes, and the last sqe (with the error) will result in a cqe
being posted with the error.

This makes the logic easier to handle in the application, and it cleans
up the submission part.

Suggested-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ipv6: fix races in ip6_dst_destroy()

We had many syzbot reports that seem to be caused by use-after-free
of struct fib6_info.

ip6_dst_destroy(), fib6_drop_pcpu_from() and rt6_remove_exception()
are writers vs rt->from, and use non consistent synchronization among
themselves.

Switching to xchg() will solve the issues with no possible
lockdep issues.

BUG: KASAN: user-memory-access in atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline]
BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:294 [inline]
BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:292 [inline]
BUG: KASAN: user-memory-access in fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline]
BUG: KASAN: user-memory-access in fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960
Write of size 4 at addr 0000000000ffffb4 by task syz-executor.1/7649

CPU: 0 PID: 7649 Comm: syz-executor.1 Not tainted 5.1.0-rc6+ #183
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
kasan_report.cold+0x5/0x40 mm/kasan/report.c:321
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x123/0x190 mm/kasan/generic.c:191
kasan_check_write+0x14/0x20 mm/kasan/common.c:108
atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline]
fib6_info_release include/net/ip6_fib.h:294 [inline]
fib6_info_release include/net/ip6_fib.h:292 [inline]
fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline]
fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960
fib6_del_route net/ipv6/ip6_fib.c:1813 [inline]
fib6_del+0xac2/0x10a0 net/ipv6/ip6_fib.c:1844
fib6_clean_node+0x3a8/0x590 net/ipv6/ip6_fib.c:2006
fib6_walk_continue+0x495/0x900 net/ipv6/ip6_fib.c:1928
fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:1976
fib6_clean_tree+0xe0/0x120 net/ipv6/ip6_fib.c:2055
__fib6_clean_all+0x118/0x2a0 net/ipv6/ip6_fib.c:2071
fib6_clean_all+0x2b/0x40 net/ipv6/ip6_fib.c:2082
rt6_sync_down_dev+0x134/0x150 net/ipv6/route.c:4057
rt6_disable_ip+0x27/0x5f0 net/ipv6/route.c:4062
addrconf_ifdown+0xa2/0x1220 net/ipv6/addrconf.c:3705
addrconf_notify+0x19a/0x2260 net/ipv6/addrconf.c:3630
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1753
call_netdevice_notifiers_extack net/core/dev.c:1765 [inline]
call_netdevice_notifiers net/core/dev.c:1779 [inline]
dev_close_many+0x33f/0x6f0 net/core/dev.c:1522
rollback_registered_many+0x43b/0xfd0 net/core/dev.c:8177
rollback_registered+0x109/0x1d0 net/core/dev.c:8242
unregister_netdevice_queue net/core/dev.c:9289 [inline]
unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9282
unregister_netdevice include/linux/netdevice.h:2658 [inline]
__tun_detach+0xd5b/0x1000 drivers/net/tun.c:727
tun_detach drivers/net/tun.c:744 [inline]
tun_chr_close+0xe0/0x180 drivers/net/tun.c:3443
__fput+0x2e5/0x8d0 fs/file_table.c:278
____fput+0x16/0x20 fs/file_table.c:309
task_work_run+0x14a/0x1c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x90a/0x2fa0 kernel/exit.c:876
do_group_exit+0x135/0x370 kernel/exit.c:980
__do_sys_exit_group kernel/exit.c:991 [inline]
__se_sys_exit_group kernel/exit.c:989 [inline]
__x64_sys_exit_group+0x44/0x50 kernel/exit.c:989
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458da9
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffeafc2a6a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 000000000000001c RCX: 0000000000458da9
RDX: 0000000000412a80 RSI: 0000000000a54ef0 RDI: 0000000000000043
RBP: 00000000004be552 R08: 000000000000000c R09: 000000000004c0d1
R10: 0000000002341940 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00007ffeafc2a7f0 R14: 000000000004c065 R15: 00007ffeafc2a800

Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'fsnotify_for_v5.1-rc8' of git://git./linux/kernel/git/jack/linux-fs

Pull fsnotify fix from Jan Kara:
"A fix of user trigerable NULL pointer dereference syzbot has recently
  spotted.

  The problem was introduced in this merge window so no CC stable is
  needed"

* tag 'fsnotify_for_v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: Fix NULL ptr deref in fanotify_get_fsid()

Revert "ACPICA: Clear status of GPEs before enabling them"

Revert commit c8b1917c8987 ("ACPICA: Clear status of GPEs before
enabling them") that causes problems with Thunderbolt controllers
to occur if a dock device is connected at init time (the xhci_hcd
and thunderbolt modules crash which prevents peripherals connected
through them from working).

Commit c8b1917c8987 effectively causes commit ecc1165b8b74 ("ACPICA:
Dispatch active GPEs at init time") to get undone, so the problem
addressed by commit ecc1165b8b74 appears again as a result of it.

Fixes: c8b1917c8987 ("ACPICA: Clear status of GPEs before enabling them")
Link: https://lore.kernel.org/lkml/s5hy33siofw.wl-tiwai@suse.de/T/#u
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1132943
Reported-by: Michael Hirmke <opensuse@mike.franken.de>
Reported-by: Takashi Iwai <tiwai@suse.de>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'wireless-drivers-for-davem-2019-04-30' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 5.1

Third set of fixes for 5.1.

iwlwifi

* fix an oops when creating debugfs entries

* fix bug when trying to capture debugging info while in rfkill

* prevent potential uninitialized memory dumps into debugging logs

* fix some initialization parameters for AX210 devices

* fix an oops with non-MSIX devices

* fix an oops when we receive a packet with bogus lengths

* fix a bug that prevented 5350 devices from working

* fix a small merge damage from the previous series

mwifiex

* fig regression with resume on SDIO

ath10k

* fix locking problem with crashdump

* fix warnings during suspend and resume

Also note that this pull conflicts with net-next. And I want to emphasie
that it's really net-next, so when you pull this to net tree it should
go without conflicts. Stephen reported the conflict here:

https://lkml.kernel.org/r/20190429115338.5decb50b@canb.auug.org.au

In iwlwifi oddly commit 154d4899e411 adds the IS_ERR_OR_NULL() in
wireless-drivers but commit c9af7528c331 removes the whole check in
wireless-drivers-next. The fix is easy, just drop the whole check for
mvmvif->dbgfs_dir in iwlwifi/mvm/debugfs-vif.c, it's unneeded anyway.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'usb-5.1-rc8' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB fixes for a bunch of warnings/errors that the
  syzbot has been finding with it's new-found ability to stress-test the
  USB layer.

  All of these are tiny, but fix real issues, and are marked for stable
  as well. All of these have had lots of testing in linux-next as well"

* tag 'usb-5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: w1 ds2490: Fix bug caused by improper use of altsetting array
  USB: yurex: Fix protection fault after device removal
  usb: usbip: fix isoc packet num validation in get_pipe
  USB: core: Fix bug caused by duplicate interface PM usage counter
  USB: dummy-hcd: Fix failure to give back unlinked URBs
  USB: core: Fix unterminated string returned by usb_string()

io_uring: remove unnecessary barrier after unsetting IORING_SQ_NEED_WAKEUP

There is no operation to order with afterwards, and removing the flag is
not critical in any way.

There will always be a "race condition" where the application will
trigger IORING_ENTER_SQ_WAKEUP when it isn't actually needed.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: remove unnecessary barrier after incrementing dropped counter

smp_store_release in io_commit_sqring already orders the store to
dropped before the update to SQ head.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: remove unnecessary barrier before reading SQ tail

There is no operation before to order with.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: remove unnecessary barrier after updating SQ head

There is no operation afterwards to order with.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: remove unnecessary barrier before reading cq head

The memory operations before reading cq head are unrelated and we
don't care about their order.

Document that the control dependency in combination with READ_ONCE and
WRITE_ONCE forms a barrier we need.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: remove unnecessary barrier before wq_has_sleeper

wq_has_sleeper has a full barrier internally. The smp_rmb barrier in
io_uring_poll synchronizes with it.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix notes on barriers

The application reading the CQ ring needs a barrier to pair with the
smp_store_release in io_commit_cqring, not the barrier after it.

Also a write barrier *after* writing something (but not *before*
writing anything interesting) doesn't order anything, so an smp_wmb()
after writing SQ tail is not needed.

Additionally consider reading SQ head and writing CQ tail in the notes.

Also add some clarifications how the various other fields in the ring
buffers are used.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix handling SQEs requesting NOWAIT

Not all request types set REQ_F_FORCE_NONBLOCK when they needed async
punting; reverse logic instead and set REQ_F_NOWAIT if request mustn't
be punted.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Merged with my previous patch for this.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'selinux-pr-20190429' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fix from Paul Moore:
"One small patch for the stable folks to fix a problem when building
  against the latest glibc.

  I'll be honest and say that I'm not really thrilled with the idea of
  sending this up right now, but Greg is a little annoyed so here I
  figured I would at least send this"

* tag 'selinux-pr-20190429' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: use kernel linux/socket.h for genheaders and mdp

l2ip: fix possible use-after-free

Before taking a refcount on a rcu protected structure,
we need to make sure the refcount is not zero.

syzbot reported :

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked lib/refcount.c:156 [inline]
WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked+0x61/0x70 lib/refcount.c:154
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 23533 Comm: syz-executor.2 Not tainted 5.1.0-rc7+ #93
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
panic+0x2cb/0x65c kernel/panic.c:214
__warn.cold+0x20/0x45 kernel/panic.c:571
report_bug+0x263/0x2b0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:179 [inline]
fixup_bug arch/x86/kernel/traps.c:174 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:refcount_inc_checked lib/refcount.c:156 [inline]
RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:154
Code: 1d 98 2b 2a 06 31 ff 89 de e8 db 2c 40 fe 84 db 75 dd e8 92 2b 40 fe 48 c7 c7 20 7a a1 87 c6 05 78 2b 2a 06 01 e8 7d d9 12 fe <0f> 0b eb c1 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41
RSP: 0018:ffff888069f0fba8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 000000000000f353 RSI: ffffffff815afcb6 RDI: ffffed100d3e1f67
RBP: ffff888069f0fbb8 R08: ffff88809b1845c0 R09: ffffed1015d23ef1
R10: ffffed1015d23ef0 R11: ffff8880ae91f787 R12: ffff8880a8f26968
R13: 0000000000000004 R14: dffffc0000000000 R15: ffff8880a49a6440
l2tp_tunnel_inc_refcount net/l2tp/l2tp_core.h:240 [inline]
l2tp_tunnel_get+0x250/0x580 net/l2tp/l2tp_core.c:173
pppol2tp_connect+0xc00/0x1c70 net/l2tp/l2tp_ppp.c:702
__sys_connect+0x266/0x330 net/socket.c:1808
__do_sys_connect net/socket.c:1819 [inline]
__se_sys_connect net/socket.c:1816 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1816

Fixes: 54652eb12c1b ("l2tp: hold tunnel while looking up sessions in l2tp_netlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

appletalk: Set error code if register_snap_client failed

If register_snap_client fails in atalk_init,
error code should be set, otherwise it will
triggers NULL pointer dereference while unloading
module.

Fixes: 9804501fa122 ("appletalk: Fix potential NULL pointer dereference in unregister_snap_client")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc

The "fs->location" is a u32 that comes from the user in ethtool_set_rxnfc().
We can't pass unclamped values to test_bit() or it results in an out of
bounds access beyond the end of the bitmap.

Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix net namespace cleanup

In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the
->calls list is empty, emitting error messages if not, and (2) wait for the
RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0).

To avoid taking the call_lock, the function prechecks ->calls and if empty,
it returns to avoid taking the lock - this is wrong, however: it still
needs to go and do the second phase and wait for ->nr_calls to become 0.

Without this, the rxrpc_net struct may get deallocated before we get to the
RCU cleanup for the last calls.  This can lead to:

  Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384
  050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkakkkkkkk

Note the "61" at offset 0x58.  This corresponds to the ->nr_calls member of
struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k
slab).

Fix this by flipping the condition on the if-statement, putting the locked
section inside the if-body and dropping the return from there.  The
function will then always go on to wait for the RCU cleanup on outstanding
calls.

Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2019-04-30

1) Fix an out-of-bound array accesses in __xfrm_policy_unlink.
   From YueHaibing.

2) Reset the secpath on failure in the ESP GRO handlers
   to avoid dereferencing an invalid pointer on error.
   From Myungho Jung.

3) Add and revert a patch that tried to add rcu annotations
   to netns_xfrm. From Su Yanjun.

4) Wait for rcu callbacks before freeing xfrm6_tunnel_spi_kmem.
   From Su Yanjun.

5) Fix forgotten vti4 ipip tunnel deregistration.
   From Jeremy Sowden:

6) Remove some duplicated log messages in vti4.
   From Jeremy Sowden.

7) Don't use IPSEC_PROTO_ANY when flushing states because
   this will flush only IPsec portocol speciffic states.
   IPPROTO_ROUTING states may remain in the lists when
   doing net exit. Fix this by replacing IPSEC_PROTO_ANY
   with zero. From Cong Wang.

8) Add length check for UDP encapsulation to fix "Oversized IP packet"
   warnings on receive side. From Sabrina Dubroca.

9) Fix xfrm interface lookup when the interface is associated to
   a vrf layer 3 master device. From Martin Willi.

10) Reload header pointers after pskb_may_pull() in _decode_session4(),
    otherwise we may read from uninitialized memory.

11) Update the documentation about xfrm[46]_gc_thresh, it
    is not used anymore after the flowcache removal.
    From Nicolas Dichtel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6/flowlabel: wait rcu grace period before put_pid()

syzbot was able to catch a use-after-free read in pid_nr_ns() [1]

ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid
but fl_free() releases fl->owner.pid before rcu grace period is started.

[1]

BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407
Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087

CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131
pid_nr_ns+0x128/0x140 kernel/pid.c:407
ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794
seq_read+0xad3/0x1130 fs/seq_file.c:268
proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227
do_loop_readv_writev fs/read_write.c:701 [inline]
do_loop_readv_writev fs/read_write.c:688 [inline]
do_iter_read+0x4a9/0x660 fs/read_write.c:922
vfs_readv+0xf0/0x160 fs/read_write.c:984
kernel_readv fs/splice.c:358 [inline]
default_file_splice_read+0x475/0x890 fs/splice.c:413
do_splice_to+0x12a/0x190 fs/splice.c:876
splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953
do_splice_direct+0x1da/0x2a0 fs/splice.c:1062
do_sendfile+0x597/0xd00 fs/read_write.c:1443
__do_sys_sendfile64 fs/read_write.c:1498 [inline]
__se_sys_sendfile64 fs/read_write.c:1490 [inline]
__x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458da9
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9
RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4
R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff

Allocated by task 17543:
save_stack+0x45/0xd0 mm/kasan/common.c:75
set_track mm/kasan/common.c:87 [inline]
__kasan_kmalloc mm/kasan/common.c:497 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505
slab_post_alloc_hook mm/slab.h:437 [inline]
slab_alloc mm/slab.c:3393 [inline]
kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555
alloc_pid+0x55/0x8f0 kernel/pid.c:168
copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932
copy_process kernel/fork.c:1709 [inline]
_do_fork+0x257/0xfd0 kernel/fork.c:2226
__do_sys_clone kernel/fork.c:2333 [inline]
__se_sys_clone kernel/fork.c:2327 [inline]
__x64_sys_clone+0xbf/0x150 kernel/fork.c:2327
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7789:
save_stack+0x45/0xd0 mm/kasan/common.c:75
set_track mm/kasan/common.c:87 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:459
kasan_slab_free+0xe/0x10 mm/kasan/common.c:467
__cache_free mm/slab.c:3499 [inline]
kmem_cache_free+0x86/0x260 mm/slab.c:3765
put_pid.part.0+0x111/0x150 kernel/pid.c:111
put_pid+0x20/0x30 kernel/pid.c:105
fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102
ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152
call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
expire_timers kernel/time/timer.c:1362 [inline]
__run_timers kernel/time/timer.c:1681 [inline]
__run_timers kernel/time/timer.c:1649 [inline]
run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
__do_softirq+0x266/0x95a kernel/softirq.c:293

The buggy address belongs to the object at ffff888094012a00
which belongs to the cache pid_2 of size 88
The buggy address is located 4 bytes inside of
88-byte region [ffff888094012a00, ffff888094012a58)
The buggy address belongs to the page:
page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080
raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
>ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
^
ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc

Fixes: 4f82f45730c6 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach

When there is no route to an IPv6 dest addr, skb_dst(skb) points
to loopback dev in the case of that the IP6CB(skb)->iif is
enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the
loopback dev. This also causes the lookup to fail on icmpv6_send() and
the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on
the loopback dev.

To reproduce:
* Gateway configuration:
        ip link add dev vrf_258 type vrf table 258
        ip link set dev enp0s9 master vrf_258
        ip addr add 66:1/64 dev enp0s9
        ip -6 route add unreachable default metric 8192 table 258
        sysctl -w net.ipv6.conf.all.forwarding=1
        sysctl -w net.ipv6.conf.enp0s9.forwarding=1
* Sender configuration:
        ip addr add 66::2/64 dev enp0s9
        ip -6 route add default via 66::1
and ping 67::1 for example from the sender.

Fix this by counting on the original netdev and reset the skb dst to
force a fresh lookup.

v2: Fix typo of destination address in the repro steps.
v3: Simplify the loopback check (per David Ahern) and use reverse
    Christmas tree format (per David Miller).

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: add sanity tests in tcp_add_backlog()

Richard and Bruno both reported that my commit added a bug,
and Bruno was able to determine the problem came when a segment
wih a FIN packet was coalesced to a prior one in tcp backlog queue.

It turns out the header prediction in tcp_rcv_established()
looks back to TCP headers in the packet, not in the metadata
(aka TCP_SKB_CB(skb)->tcp_flags)

The fast path in tcp_rcv_established() is not supposed to
handle a FIN flag (it does not call tcp_fin())

Therefore we need to make sure to propagate the FIN flag,
so that the coalesced packet does not go through the fast path,
the same than a GRO packet carrying a FIN flag.

While we are at it, make sure we do not coalesce packets with
RST or SYN, or if they do not have ACK set.

Many thanks to Richard and Bruno for pinpointing the bad commit,
and to Richard for providing a first version of the fix.

Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Bruno Prémont <bonbons@sysophe.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: invert flowlabel sharing check in process and user mode

A request for a flowlabel fails in process or user exclusive mode must
fail if the caller pid or uid does not match. Invert the test.

Previously, the test was unsafe wrt PID recycling, but indeed tested
for inequality: fl1->owner != fl->owner

Fixes: 4f82f45730c68 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ieee802154-for-davem-2019-04-25' of git://git./linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
ieee802154 for net 2019-04-25

An update from ieee802154 for your *net* tree.

Another fix from Kangjie Lu to ensure better checking regmap updates in the
mcr20a driver. Nothing else I have pending for the final release.

If there are any problems let me know.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'seccomp-v5.1-rc8' of git://git./linux/kernel/git/kees/linux

Pull seccomp fixes from Kees Cook:
"Syzbot found a use-after-free bug in seccomp due to flags that should
  not be allowed to be used together.

  Tycho fixed this, I updated the self-tests, and the syzkaller PoC has
  been running for several days without triggering KASan (before this
  fix, it would reproduce). These patches have also been in -next for
  almost a week, just to be sure.

   - Add logic for making some seccomp flags exclusive (Tycho)

   - Update selftests for exclusivity testing (Kees)"

* tag 'seccomp-v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Make NEW_LISTENER and TSYNC flags exclusive
  selftests/seccomp: Prepare for exclusive seccomp flags

x86: make ZERO_PAGE() at least parse its argument

This doesn't really do anything, but at least we now parse teh
ZERO_PAGE() address argument so that we'll catch the most obvious errors
in usage next time they'll happen.

See commit 6a5c5d26c4c6 ("rdma: fix build errors on s390 and MIPS due to
bad ZERO_PAGE use") what happens when we don't have any use of the macro
argument at all.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rdma: fix build errors on s390 and MIPS due to bad ZERO_PAGE use

The parameter to ZERO_PAGE() was wrong, but since all architectures
except for MIPS and s390 ignore it, it wasn't noticed until 0-day
reported the build error.

Fixes: 67f269b37f9b ("RDMA/ucontext: Fix regression with disassociate")
Cc: stable@vger.kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge ath-current from git://git./linux/kernel/git/kvalo/ath.git

ath.git fixes for 5.1. Major changes:

ath10k

* fix locking problem with crashdump

* fix warnings during suspend and resume

selinux: use kernel linux/socket.h for genheaders and mdp

When compiling genheaders and mdp from a newer host kernel, the
following error happens:

    In file included from scripts/selinux/genheaders/genheaders.c:18:
    ./security/selinux/include/classmap.h:238:2: error: #error New
    address family defined, please update secclass_map.  #error New
    address family defined, please update secclass_map.  ^~~~~
    make[3]: *** [scripts/Makefile.host:107:
    scripts/selinux/genheaders/genheaders] Error 1 make[2]: ***
    [scripts/Makefile.build:599: scripts/selinux/genheaders] Error 2
    make[1]: *** [scripts/Makefile.build:599: scripts/selinux] Error 2
    make[1]: *** Waiting for unfinished jobs....

Instead of relying on the host definition, include linux/socket.h in
classmap.h to have PF_MAX.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara <paulo@paulo.ac>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: manually merge in mdp.c, subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>

Merge tag 'mac80211-for-davem-2019-04-26' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
* fix use-after-free in mac80211 TXQs
* fix RX STBC byte order
* fix debugfs rename crashing due to ERR_PTR()
* fix missing regulatory notification
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ath10k: Drop WARN_ON()s that always trigger during system resume

ath10k_mac_vif_chan() always returns an error for the given vif
during system-wide resume which reliably triggers two WARN_ON()s
in ath10k_bss_info_changed() and they are not particularly
useful in that code path, so drop them.

Tested: QCA6174 hw3.2 PCI with WLAN.RM.2.0-00180-QCARMSWPZ-1
Tested: QCA6174 hw3.2 SDIO with WLAN.RMH.4.4.1-00007-QCARMSWP-1

Fixes: cd93b83ad927 ("ath10k: support for multicast rate control")
Fixes: f279294e9ee2 ("ath10k: add support for configuring management packet rate")
Cc: stable@vger.kernel.org
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

ath10k: perform crash dump collection in workqueue

Commit 25733c4e67df ("ath10k: pci: use mutex for diagnostic window CE
polling") introduced a regression where we try to sleep (grab a mutex)
in an atomic context:

[  233.602619] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254
[  233.602626] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0
[  233.602636] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.1.0-rc2 #4
[  233.602642] Hardware name: Google Scarlet (DT)
[  233.602647] Call trace:
[  233.602663]  dump_backtrace+0x0/0x11c
[  233.602672]  show_stack+0x20/0x28
[  233.602681]  dump_stack+0x98/0xbc
[  233.602690]  ___might_sleep+0x154/0x16c
[  233.602696]  __might_sleep+0x78/0x88
[  233.602704]  mutex_lock+0x2c/0x5c
[  233.602717]  ath10k_pci_diag_read_mem+0x68/0x21c [ath10k_pci]
[  233.602725]  ath10k_pci_diag_read32+0x48/0x74 [ath10k_pci]
[  233.602733]  ath10k_pci_dump_registers+0x5c/0x16c [ath10k_pci]
[  233.602741]  ath10k_pci_fw_crashed_dump+0xb8/0x548 [ath10k_pci]
[  233.602749]  ath10k_pci_napi_poll+0x60/0x128 [ath10k_pci]
[  233.602757]  net_rx_action+0x140/0x388
[  233.602766]  __do_softirq+0x1b0/0x35c
[...]

ath10k_pci_fw_crashed_dump() is called from NAPI contexts, and firmware
memory dumps are retrieved using the diag memory interface.

A simple reproduction case is to run this on QCA6174A /
WLAN.RM.4.4.1-00132-QCARMSWP-1, which happens to be a way to b0rk the
firmware:

  dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value bs=4K count=1
of=/dev/null

(NB: simulated firmware crashes, via debugfs, don't trigger firmware
dumps.)

The fix is to move the crash-dump into a workqueue context, and avoid
relying on 'data_lock' for most mutual exclusion. We only keep using it
here for protecting 'fw_crash_counter', while the rest of the coredump
buffers are protected by a new 'dump_mutex'.

I've tested the above with simulated firmware crashes (debugfs 'reset'
file), real firmware crashes (the 'dd' command above), and a variety of
reboot and suspend/resume configurations on QCA6174A.

Reported here:
http://lkml.kernel.org/linux-wireless/20190325202706.GA68720@google.com

Fixes: 25733c4e67df ("ath10k: pci: use mutex for diagnostic window CE polling")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Linux 5.1-rc7

fsnotify: Fix NULL ptr deref in fanotify_get_fsid()

fanotify_get_fsid() is reading mark->connector->fsid under srcu. It can
happen that it sees mark not fully initialized or mark that is already
detached from the object list. In these cases mark->connector
can be NULL leading to NULL ptr dereference. Fix the problem by
being careful when reading mark->connector and check it for being NULL.
Also use WRITE_ONCE when writing the mark just to prevent compiler from
doing something stupid.

Reported-by: syzbot+15927486a4f1bfcbaf91@syzkaller.appspotmail.com
Fixes: 77115225acc6 ("fanotify: cache fsid in fsnotify_mark_connector")
Signed-off-by: Jan Kara <jack@suse.cz>

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"A small number of ARM fixes

   - Fix function tracer and unwinder dependencies so that we don't end
     up building kernels that will crash

   - Fix ARMv7M nommu initialisation (missing register initialisation)

   - Fix EFI decompressor entry (ensuring barrier instructions are
     enabled prior to use)"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache
  ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled
  ARM: fix function graph tracer and unwinder dependencies

Merge tag 'powerpc-5.1-6' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We
  use some of the hugetlb inlines (eg. pud_huge()) when operating on the
  linear mapping and if they're compiled into empty wrappers we can
  corrupt memory.

  Then two fixes to our VFIO IOMMU code. The first is not a regression
  but fixes the locking to avoid a user-triggerable deadlock.

  The second does fix a regression since rc1, and depends on the first
  fix. It makes it possible to run guests with large amounts of memory
  again (~256GB).

  Thanks to Alexey Kardashevskiy"

* tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm_iommu: Allow pinning large regions
  powerpc/mm_iommu: Fix potential deadlock
  powerpc/mm/radix: Make Radix require HUGETLB_PAGE

Merge tag 'for-linus-20190428' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"A set of io_uring fixes that should go into this release. In
  particular, this contains:

   - The mutex lock vs ctx ref count fix (me)

   - Removal of a dead variable (me)

   - Two race fixes (Stefan)

   - Ring head/tail condition fix for poll full SQ detection (Stefan)"

* tag 'for-linus-20190428' of git://git.kernel.dk/linux-block:
  io_uring: remove 'state' argument from io_{read,write} path
  io_uring: fix poll full SQ detection
  io_uring: fix race condition when sq threads goes sleeping
  io_uring: fix race condition reading SQ entries
  io_uring: fail io_uring_register(2) on a dying io_uring instance

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"One core bug fix and a few driver ones

   - FRWR memory registration for hfi1/qib didn't work with with some
     iovas causing a NFSoRDMA failure regression due to a fix in the NFS
     side

   - A command flow error in mlx5 allowed user space to send a corrupt
     command (and also smash the kernel stack we've since learned)

   - Fix a regression and some bugs with device hot unplug that was
     discovered while reviewing Andrea's patches

   - hns has a failure if the user asks for certain QP configurations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Bugfix for mapping user db
  RDMA/ucontext: Fix regression with disassociate
  RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
  RDMA/mlx5: Do not allow the user to write to the clock page
  IB/mlx5: Fix scatter to CQE in DCT QP creation
  IB/rdmavt: Fix frwr memory registration