drm/radeon: export reservation_object from dmabuf to ttm

Adds an extra argument to radeon_bo_create, which is only used in radeon_prime.c.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: cope with foreign fences inside the reservation object

Not the whole world is a radeon! :-)

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: cope with foreign fences inside display

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/cik: write gfx ucode version to ucode addr reg

Helpful for debugging as the version shows up in a
register dump.

Cc: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/si: print full CS when we hit a packet 0

We should never have a packet 0 in the command stream.
Dump the full command stream to help debug.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=84500

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove unecessary includes

The requirement for these was removed in:
0a168933976eb483da91161316bbbbcb74d00486

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/combios: declare legacy_connector_convert as static

legacy_connector_convert is used in radeon_combios.c only, so declare it as static.

Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/atombios: declare connector convert tables as static

The tables:
 * supported_devices_connector_convert
 * supported_devices_connector_object_id_convert
 * object_connector_convert
are used in redeon_atombios.c only, so declare them as static.

Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table

It's no longer used now that the underlying bugs are fixed.

Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: drop clk/voltage dependency filters for BTC

No longer needed now that the underlying bug was fixed in
e07929810f0a19ddd756558290c7d72827cbfcd9
(drm/radeon/dpm: fix typo in vddci setup for eg/btc).

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721

Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: drop clk/voltage dependency filters for CI

Not sure this was ever necessary for CI, was just done
to be on the safe side.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721

Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: drop clk/voltage dependency filters for SI

Not sure this was ever necessary for SI, was just done
to be on the safe side.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721

Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: drop clk/voltage dependency filters for NI

No longer needed now that the underlying bug was fixed in
b0880e87c1fd038b84498944f52e52c3e86ebe59
(drm/radeon/dpm: fix vddci setup typo on cayman).

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721

Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: disable audio when we disable hdmi (v2)

This should allow the audio driver to get a better
idea of whether the sink is connected or not.

v2: fix copy/paste typo noticed by David Henningsson

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: split audio enable between eg and r600 (v2)

Clean up the enable sequence as well.

V2: clean up duplicate defines

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: consolidate r600_audio.c into r600_hdmi.c

Most of that functionality is only used by r600_hdmi.c
and I'm planning to change that further.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: consolidate duplicate encode is digital function

Only need one copy.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix register name to match internal name

no functional change.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux into drm-next

fixups for nouveau and fencing

* 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux:
  drm/nouveau: export reservation_object from dmabuf to ttm
  drm/ttm: add reservation_object as argument to ttm_bo_init
  drm: Pass dma-buf as argument to gem_prime_import_sg_table
  drm/nouveau: assign fence_chan->name correctly
  drm/nouveau: specify if interruptible wait is desired in nouveau_fence_sync
  drm/nouveau: bump driver patchlevel to 1.2.1

Merge tag 'topic/core-stuff-2014-09-29' of git://anongit.freedesktop.org/drm-intel into drm-next

Ok, here's the update core-stuff pull request with the locking fixup patch
fixed up with another patch.

* tag 'topic/core-stuff-2014-09-29' of git://anongit.freedesktop.org/drm-intel:
  drm: Drop grab fpriv->fbs_lock in drm_fb_release
  drm/udl: use container_of to resolve udl_fbdev from drm_fb_helper
  drm/ast: use container_of to resolve ast_fbdev from drm_fb_helper
  drm/gma500: use container_of to resolve psb_fbdev from drm_fb_helper
  drm/qxl: use container_of to resolve qxl_fbdev from drm_fb_helper
  drm/nouveau: use container_of to resolve nouveau_plane from drm_plane
  drm/nouveau: use container_of to resolve nouveau_fbdev from drm_fb_helper
  drm/radeon: use container_of to resolve radeon_fbdev from drm_fb_helper
  drm/mgag200: use container_of to resolve mga_fbdev from drm_fb_helper
  drm/cirrus: use container_of to resolve cirrus_fbdev from drm_fb_helper
  drm: Improve debug output for drm_wait_one_vblank
  drm: Fixup locking for universal cursor planes
  drm: Don't update vblank timestamp when the counter didn't change

drm/nouveau: export reservation_object from dmabuf to ttm

Adds an extra argument to nouveau_bo_new, which is only used in nouveau_prime.c.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>

drm/ttm: add reservation_object as argument to ttm_bo_init

This allows importing reservation objects from dma-bufs.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>

drm: Pass dma-buf as argument to gem_prime_import_sg_table

Allows importing dma_reservation_objects from a dma-buf.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>

drm/nouveau: assign fence_chan->name correctly

Make nouveau_fence_chan refcounted, to make trace_fence_destroy
always return the correct name without a race condition.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>

drm/nouveau: specify if interruptible wait is desired in nouveau_fence_sync

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>

drm/nouveau: bump driver patchlevel to 1.2.1

Allows userspace to detect shared fences are supported.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>

drm/nouveau: nv84+: fix fence context seqno's

This fixes a regression introduced by "drm/nouveau: rework to new fence interface"
(commit 29ba89b2371d466).

The fence sequence should not be reset after creation, the old value is used instead.
On destruction the final value is written, to prevent another source of accidental
wraparound in case of a channel being destroyed after a hang, and unblocking any other
channel that may wait on the about-to-be-deleted channel to signal.

I'm nothing if not optimistic about any hope of recovery from that. ;-)

Reported-by: Ted Percival <ted@tedp.id.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Ted Percival <ted@tedp.id.au>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Drop grab fpriv->fbs_lock in drm_fb_release

Paulo Zanoni reported a lockdep splat with a locking inversion between
fpriv->fbs_lock and the modeset locks. This issue was introduced in

commit f2b50c1161590c3bcdbf3455fe4c575f1c1bd293
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Sep 12 17:07:32 2014 +0200

    drm: Fixup locking for universal cursor planes

This here is actually one of the rare cases where lockdep hits a false
positive: The deadlock only happens in drm_fb_release, which cleans up
the file private structure when all the references are gone. So the
locking is the very last one and no one else can deadlock. It also
doesn't protect anything at all, since all ioctls are guaranteed to
have returned at this point - otherwise they'd still hold a reference
on the file.

So let's just drop it and replace it with a big comment.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reported-and-Tested-by: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/udl: use container_of to resolve udl_fbdev from drm_fb_helper

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/ast: use container_of to resolve ast_fbdev from drm_fb_helper

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/gma500: use container_of to resolve psb_fbdev from drm_fb_helper

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/qxl: use container_of to resolve qxl_fbdev from drm_fb_helper

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/nouveau: use container_of to resolve nouveau_plane from drm_plane

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/nouveau: use container_of to resolve nouveau_fbdev from drm_fb_helper

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/radeon: use container_of to resolve radeon_fbdev from drm_fb_helper

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/mgag200: use container_of to resolve mga_fbdev from drm_fb_helper

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/cirrus: use container_of to resolve cirrus_fbdev from drm_fb_helper

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Improve debug output for drm_wait_one_vblank

This replicates what we've done in i915 in

commit 31e4b89acbd7b19c9a8557e6e660a583a0b97daa
Author: Damien Lespiau <damien.lespiau@intel.com>
Date:   Mon Aug 18 13:51:00 2014 +0100

    drm/i915: Print the pipe on which the vblank wait times out

to make sure that when we switch i915 to drm_wait_one_vblank that the
debug output doesn't regress.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm: Fixup locking for universal cursor planes

Bunch of things amiss:
- Updating crtc->cursor_x/y was done without any locking. Spotted by
  David Herrmann.
- Dereferencing crtc->cursor->fb was using the wrong lock, should take
  the crtc lock.
- Grabbing _all_ modeset locks torpedoes the reason why we added
  fine-grained locks originally: Cursor updates shouldn't stall on
  background stuff like probing outputs.

Best is to just grab the crtc lock around everything and drop all the
other locking. The only issue is that we can't switch planes between
crtcs with that, so make sure that never happens when someone uses
universal plane helpers. This shouldn't be a possible regression ever
since legacy ioctls also only grabbed the crtc lock, so switching
crtcs was never possible for the underlying plane object. And i915
(the only user of universal cursors thus far) has fixed cursor->crtc
links.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Pallavi G<pallavi.g@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm: Don't update vblank timestamp when the counter didn't change

If we already have a timestamp for the current vblank counter, don't
update it with a new timestmap. Small errors can creep in between two
timestamp queries for the same vblank count, which could be confusing to
userspace when it queries the timestamp for the same vblank sequence
number twice.

This problem gets exposed when the vblank disable timer is not used
(or is set to expire quickly) and thus we can get multiple vblank
disable<->enable transition during the same frame which would all
attempt to update the timestamp with the latest estimate.

Testcase: igt/kms_flip/flip-vs-expired-vblank
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
v2:Mario: Trivial rebase on top of current drm-next (13-Sep-2014)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/doc: Fixup drm_irq kerneldoc includes.

Only !P can be used together with a function list.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Extract <drm/drm_gem.h>

v2: Don't forget git add, noticed by David.

Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Move internal debugfs functions to drm_internal.h

In my header cleanup I've missed the debugfs functions completely.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Move leftover ioctl declarations to drm_internal.h

Somehow I've missed these three, fix this up asap. Plus move
drm_master_create since while at it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Move drm_vm_open_locked into drm_internal.h

Leftover from my previous header cleanup.

This depends upon the patch to rework exynos mmap support, otherwise
it'll break exynos.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: move drm_mmap to <drm/drm_legacy.h>

Now that we've removed the copypasted users in gem/ttm we can
relegate the legacy buffer mapping support to where it belongs.
Also give it the proper drm_legacy_ prefix.

While at it statify drm_mmap_locked, somehow I've missed that in my
previous header rework.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/gem: Don't call drm_mmap from drm_gem_mmap

The only user I could dig out was i915 back when ums+gem was still a
thing. But we've just very much killed that, and even when someone
screams about that we should resurrect that with a special hack
(wrapping drm_gem_mmap) in i915, not in the core code.

So good riddance to another entry point of the legacy buffer mapping
code.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/<ttm-based-drivers>: Don't call drm_mmap

Really, the legacy buffer api should be dead, especially for all these
newfangled drivers. I suspect this is copypasta from the transitioning
days, which probably originated in radeon.

Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Rashika <rashika.kheria@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: change drm_err return type to void

The return value is not used by callers of this function
nor by uses of the DRM_ERROR macro so change the function
to return void.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ttm: Clean usage of ttm_io_prot() with TTM_PL_FLAG_CACHED

Today, most callers of ttm_io_prot() check TTM_PL_FLAG_CACHED before
calling it since on some archs it will unconditionally create non-cached
mappings.

But not all callers do which is incorrect as far as I can tell.

Instead, move that check inside ttm_io_port() itself for all archs
and make powerpc use the same implementation as ia64 and arm

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: powerpc can use a simpler drm_io_prot()

What the code does is equivalent to the x86 code, so let's use
it as well

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

   Sorry for late. This pull request includes some enhancements
   for Exynos drm, new feature supports, cleanups and fixups
   like below,

   - Consider low power transmission for drm mipi dsi module,
     and also add non-continuous clock mode support for Exynos
     mipi dsi driver.
   - Add Exynos3250 SoC support.
   - Enhance and clean up ipp framework and fimc driver.
   - Update to use component match support and fix up
     de-initialization order.
   - Remove a direct mmap interface and relevant stuff specific to
     Exynos drm, use drm generic mmap interface instead.
     And we will remove the specific interface from userspace
     library, libdrm soon.
   - Use universal plane which allows to replace fake primary plane
     with the real one.
   - Some code cleanups and fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (40 commits)
  drm/exynos: switch to universal plane API
  drm/exynos: use drm generic mmap interface
  drm/exynos: remove DRM_EXYNOS_GEM_MAP_OFFSET ioctl
  drm/exynos: factor out initial setting of each driver
  drm/exynos/hdmi: unregister connector on removal
  drm/exynos/dp: unregister connector on removal
  drm/exynos/dpi: unregister connector and panel on removal
  drm/exynos/dsi: unregister connector on removal
  drm/exynos/fb: free exynos framebuffer on error
  drm/exynos/fbdev: fix fbdev gem object cleanup
  drm/exynos: fix drm driver de-initialization order
  drm/exynos/ipp: traverse ipp drivers list safely
  drm/exynos: update to use component match support
  drm/exynos/ipp: add file checks for ioctls
  drm/exynos/ipp: remove file argument from node related functions
  drm/exynos/fimc: fix source buffer registers
  drm/exynos/fimc: simplify buffer queuing
  drm/exynos/fimc: do not enable fimc twice
  drm/exynos/fimc: avoid clearing overflow bits
  drm/exynos/ipp: remove events during command cleaning
  ...

drm/exynos: switch to universal plane API

The patch replaces legacy functions
drm_plane_init() / drm_crtc_init() with
drm_universal_plane_init() and drm_crtc_init_with_planes().
It allows to replace fake primary plane with the real one.
Additionally the patch leaves cleanup of crtcs to core,
this way planes and crtcs are cleaned in correct order.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: use drm generic mmap interface

This patch removes DRM_EXYNOS_GEM_MMAP ictrl feature specific
to Exynos drm and instead uses drm generic mmap.

We had used the interface specific to Exynos drm to do mmap directly,
not to use demand paging which maps each page with physical memory
at page fault handler. We don't need the specific mmap interface
because the drm generic mmap which uses vm offset manager stuff can
also do mmap directly.

This patch makes a userspace region to be mapped with whole physical
memory region allocated by userspace request when mmap system call is
requested.

Changelog v2:
- do not set VM_IO, VM_DONTEXPEND and VM_DONTDUMP. These flags were already
  set by drm_gem_mmap
- do not include <linux/anon_inodes.h>, which isn't needed anymore.

Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove DRM_EXYNOS_GEM_MAP_OFFSET ioctl

This interface and relevant codes aren't used anymore.

Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: factor out initial setting of each driver

From fimd driver and vidi driver, dev->irq_enabled and
dev->vblank_disable_allowed are set and also mixer needs them even if
missed. It's duplicated so set them when loads drm driver.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/hdmi: unregister connector on removal

During component removal driver should unregister connector.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/dp: unregister connector on removal

During component removal driver should unregister connector.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/dpi: unregister connector and panel on removal

During component removal it should unregister connector
and optionally detach the panel.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/dsi: unregister connector on removal

During component unbind connector should be unregistered.
Also DSI host should be unregistered after KMS cleanup.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fb: free exynos framebuffer on error

In case drm_framebuffer_init fails exynos_fb should be freed
before returning an error.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fbdev: fix fbdev gem object cleanup

exynos_gem_obj is used by exynos_drm_fbdev_destroy so it cannot be destroyed
before calling the latter. exynos_gem_obj will be destroyed anyway by
exynos_drm_fbdev_destroy->...->exynos_drm_fb_destroy.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix drm driver de-initialization order

Since components have their own cleanup routines calling
drm_mode_config_cleanup before component_unbind_all causes errors
due to double free of KMS objects. The patch fixes it by changing
de-initialization order. Now it is exactly opposite to init order.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: traverse ipp drivers list safely

On ipp subsystem removal list of ipp drivers is traversed
and their members are deleted. To do it properly safe version
of list_for_each* should be used.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: update to use component match support

Update Exynos's DRM driver to use component match support rater than
add_components.

Changelog v2:
- release devices and drivers if failed.
- change compare_of to compare_dev.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>

drm/exynos/ipp: add file checks for ioctls

Process should not have access to ipp nodes created by another
process. The patch adds necessary checks.
It also simplifies lookup for command node.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: remove file argument from node related functions

Since file pointer is preserved in c_node passing it
as argument in node functions is redundant.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fimc: fix source buffer registers

FIMC in default mode of operation uses only one input buffer,
but the driver used also second buffer, as a result only the
first frame was processed correctly. The patch fixes it.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fimc: simplify buffer queuing

The patch removes redundant checks, redundant HW reads
and simplifies code.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fimc: do not enable fimc twice

The patch removes redundant H/W activation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fimc: avoid clearing overflow bits

Overflow bits shall be cleared by H/W.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: remove events during command cleaning

Events were removed only during stop command, as a result
there were memory leaks if program prematurely exited.
This patch fixes it.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: stop hardware before freeing memory

Memory shouldn't be freed when hardware is still running.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: replace work_struct casting with better constructs

Type casting should be avoided if possible. In case of
work_struct it can be simply replaced by reference to member field.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: clean memory nodes on command node cleaning

The nodes should be removed before removing command node.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: move nodes cleaning to separate function

The patch introduces ipp_clean_mem_nodes function which replaces
redundant code. Additionally memory node function definitions
are moved up to increase its visibility.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: free partially allocated resources on error

In case of allocation errors some already allocated buffers
were not freed. The patch fixes it.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: remove unused field in command node

Since command node have file pointer dev field became useless.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: remove only related commands on file close

On file close driver should remove only command nodes created
via this file.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: move file reference from memory to command node

Command node should contain file reference to distinguish commands
created by different processes.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: cancel works before command node clean

All pending works should be canceled prior to its removal.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/ipp: remove fake pm callbacks

PM callbacks in ipp core do nothing, so the patch removes it.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: fix window clear code

To correctly disable hardware window during driver init, both enable bits
(WINCONx_ENWIN in WINCON and SHADOWCON_CHx_ENABLE in SHADOWCON) must be
cleared, otherwise hardware fails to re-enable such window later.

While touching this function, also temporarily disable ctx->suspended flag
to let fimd_wait_for_vblank function really to do its job.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fbdev: set smem_len for fbdev

Commit [0] stopped setting fix.smem_start and fix.smem_len when creating
the fbdev.

[0] 2f1eab8d8ab59e799f7d51d62410b398607a7bc3
  drm/exynos/fbdev: don't set fix.smem/mmio_{start,len}

However, smem_len is used by some userland applications to calculate the
size for mmap.  In particular, it is used by xf86-video-fbdev:

http://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/fbdevhw/fbdevhw.c?id=xorg-server-1.15.99.903#n571

So, let's restore setting the smem_len to unbreak things for these users.

Note: we are still leaving smem_start set to 0.

Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reported-by: Gunther Noack <me@guenthernoack.de>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

ARM: dts: add mipi dsi device node to exynos3250.dtsi

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

ARM: dts: add mipi_phy device node to exynos3250.dtsi

This patch adds mipi_phy device node to reset, disable and enable
DSIM and CSIS PHY.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

ARM: dts: add fimd device node to exynos3250.dsti

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

drm/exynos: fimd: add Exynos3 SoC support

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

drm/exynos: mipi-dsi: add Exynos3 SoC support

This patch adds Exynos3250/3472 SoCs support.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

drm/exynos: mipi-dsi: consider non-continuous clock mode

This patch adds non-continuous clock mode support

Clock mode on Clock Lane is continuous clock by default.
So if we want to transmit data in non-continuous clock mode
to reduce power consumption, then host driver should set
DSIM_CLKLANE_STOP bit. In this case, host controller turns off
HS clock between high speed transmissions.

For this, this patch adds a new bit, DSIM_CLKLANE_STOP, and makes
the host driver sets this bit only in case that dsi->mode_flags has
MIPI_DSI_CLOCK_NON_CONTINUOUS flag.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

drm/mipi-dsi: consider low power transmission

This patch adds a new flag, MIPI_DSI-MODE_LPM, to transmit data
in low power. With this flag, msg.flags has MIPI_DSI_MSG_USE_LPM
so that host driver of each SoC can clear or set relevant register
bit for low power transmission.

All host drivers shall support continuous clock behavior on the
Clock Lane, and optionally may support non-continuous clock behavior.
Both of them can transmit data in high speed of low power.

With each clock behavior, non-continuous or continuous clock mode,
host controller will transmit data in high speed by default so if
peripheral wants to receive data in low power, the peripheral driver
should set MIPI_DSI_MODE_LPM flag.

Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: dsi: fix exynos_dsi_set_pll() wrong return value

The type of this function is unsigned long, and it is expected
to return proper fout value or zero if something is wrong.
So this patch fixes wrong return value for error cases.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge branch 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-next

single AGP fix

* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix AGP userptr handling

drm/radeon: fix AGP userptr handling

AGP mappings are not cache coherent, so userptr support
won't work. Additional to that the AGP implementation uses
a different ttm_tt container structure so we run into
problems if we cast the pointer without checking if it's
the right type.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next

Commit "drm/rcar-du: Use struct videomode in platform data" touches board code
in arch/arm/mach-shmobile. There is, to the best of my knowledge, no risk of
conflict for v3.18. Simon, are you fine with getting those changes merged
through Dave's tree (and could you confirm that no conflict should occur) ?

Simon acked the merge:
Acked-by: Simon Horman <horms+renesas@verge.net.au>
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
  drm/rcar-du: Add OF support
  drm/rcar-du: Use struct videomode in platform data
  video: Add DT bindings for the R-Car Display Unit
  video: Add THC63LVDM83D DT bindings documentation
  video: Add ADV7123 DT bindings documentation
  video: Add DT binding documentation for VGA connector
  devicetree: Add vendor prefix "thine" to vendor-prefixes.txt
  devicetree: Add vendor prefix "mitsubishi" to vendor-prefixes.txt
  drm/shmob: Update copyright notice
  drm/rcar-du: Update copyright notice

drm/ttm: make sure format string cannot leak in

While zone->name is currently hard coded, the call to kobject_init_and_add()
should follow the more defensive argument list usage (as already done in
other places in ttm_memory.c) where "%s" is used instead of directly passing
in a variable as a format string.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/tilcdc: panel: Add support for enable GPIO

In order to support the "enable GPIO" available in many panel devices,
this commit adds a proper devicetree binding.

By providing an enable GPIO in the devicetree, the driver can now turn
off and on the panel device, and/or the backlight device. Both the
backlight and the GPIO are optional properties.

Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/tilcdc: panel: Set return value explicitly

Instead of setting an initial value for the return code, set it explicitly
on each error path. This is just a cosmetic cleanup, as preparation for the
enable GPIO support.

Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/tilcdc: panel: Fix backlight devicetree support

The current backlight support is broken; the driver expects a backlight-class
in the panel devicetree node. Fix this by implementing it properly, getting
an optional backlight from a phandle.

This shouldn't cause any backward-compatibility DT issue because the current
implementation doesn't work and is not even documented.

Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/tilcdc: panel: Use devm_kzalloc to simplify the error path

Using the managed variant to allocate the resource makes the code simpler
and less error-prone.

Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>