drm/i915: Show engine state when hangcheck detects a stall

Knowing the state of the engine when hangcheck thinks it is stalling is
useful for both debugging hangcheck itself and the potential cause of an
unwanted stall.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214122613.26134-1-chris@chris-wilson.co.uk

drm/i915: make CS frequency read support missing more obvious

As suggested by Chris, we should make this more obvious for people
working with newer generations.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213171154.6201-1-lionel.g.landwerlin@intel.com

drm/i915/guc: Extract doorbell verification into a function

We have the selftest that's checking doorbell create/destroy, so there's
no need to check all doorbells delaying the reset every time.
We do want to have that extra sanity check at module load/unload though.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-7-michal.winiarski@intel.com

drm/i915/guc: Extract clients allocation to submission_init

We can now move the clients allocation to submission_init path, rather
than keeping the condition inside submission_enable called on every
reset.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-6-michal.winiarski@intel.com

drm/i915/guc: Extract doorbell creation from client allocation

Full GPU reset causes GuC to be reset. This means that every time we're
doing a reset, we need to talk to GuC and tell it about doorbells.
Let's separate the communication part (create_doorbell) from our
internal bookkeeping (reserve_doorbell) so that we can cleanly separate
the initialization done at module load from reinitialization done at
reset in the following patch.
While I'm here, let's also add a proper (although slightly asymetric)
cleanup that doesn't try to communicate with GuC after it's already
gone, getting rid of "expected" warnings caused by GuC action failures
on module unload.

Note that I've also removed one of the tests (bitmap out of sync), since
it doesn't make much sense anymore - bitmaps are now not expected to
change during the lifetime of a client.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-5-michal.winiarski@intel.com

drm/i915/guc: Call invalidate after changing the vfunc

To make this operation a bit cleaner, we should make sure that the HW
can catch up by calling the new implementation right away.
Note that currently we're only touching the vfunc at module load time
(before GuC is even loaded), so this shouldn't cause any functional
changes.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-4-michal.winiarski@intel.com

drm/i915/guc: Extract guc_init from guc_init_hw

After GPU reset, GuC HW needs to be reinitialized (with FW reload).
Unfortunately, we're doing some extra work there (mostly allocating stuff),
work that can be moved to guc_init and called once at driver load time.

As a side effect we're no longer hitting an assert in
i915_ggtt_enable_guc on suspend/resume.

v2: Do not duplicate disable_communication / reset_guc_interrupts
v3: Add proper teardown after rebase

References: 04f7b24eccdf ("drm/i915/guc: Assert that we switch between known ggtt->invalidate functions")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-3-michal.winiarski@intel.com

drm/i915/guc: Move GuC workqueue allocations outside of the mutex

This gets rid of the following lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc2-CI-Patchwork_7428+ #1 Not tainted
------------------------------------------------------
debugfs_test/1351 is trying to acquire lock:
 (&dev->struct_mutex){+.+.}, at: [<000000009d90d1a3>] i915_mutex_lock_interruptible+0x47/0x130 [i915]

but task is already holding lock:
 (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #6 (&mm->mmap_sem){++++}:
       __might_fault+0x63/0x90
       _copy_to_user+0x1e/0x70
       filldir+0x8c/0xf0
       dcache_readdir+0xeb/0x160
       iterate_dir+0xe6/0x150
       SyS_getdents+0xa0/0x130
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #5 (&sb->s_type->i_mutex_key#5){++++}:
       lockref_get+0x9/0x20

-> #4 ((completion)&req.done){+.+.}:
       wait_for_common+0x54/0x210
       devtmpfs_create_node+0x130/0x150
       device_add+0x5ad/0x5e0
       device_create_groups_vargs+0xd4/0xe0
       device_create+0x35/0x40
       msr_device_create+0x22/0x40
       cpuhp_invoke_callback+0xc5/0xbf0
       cpuhp_thread_fun+0x167/0x210
       smpboot_thread_fn+0x17f/0x270
       kthread+0x173/0x1b0
       ret_from_fork+0x24/0x30

-> #3 (cpuhp_state-up){+.+.}:
       cpuhp_issue_call+0x132/0x1c0
       __cpuhp_setup_state_cpuslocked+0x12f/0x2a0
       __cpuhp_setup_state+0x3a/0x50
       page_writeback_init+0x3a/0x5c
       start_kernel+0x393/0x3e2
       secondary_startup_64+0xa5/0xb0

-> #2 (cpuhp_state_mutex){+.+.}:
       __mutex_lock+0x81/0x9b0
       __cpuhp_setup_state_cpuslocked+0x4b/0x2a0
       __cpuhp_setup_state+0x3a/0x50
       page_alloc_init+0x1f/0x26
       start_kernel+0x139/0x3e2
       secondary_startup_64+0xa5/0xb0

-> #1 (cpu_hotplug_lock.rw_sem){++++}:
       cpus_read_lock+0x34/0xa0
       apply_workqueue_attrs+0xd/0x40
       __alloc_workqueue_key+0x2c7/0x4e1
       intel_guc_submission_init+0x10c/0x650 [i915]
       intel_uc_init_hw+0x29e/0x460 [i915]
       i915_gem_init_hw+0xca/0x290 [i915]
       i915_gem_init+0x115/0x3a0 [i915]
       i915_driver_load+0x9a8/0x16c0 [i915]
       i915_pci_probe+0x2e/0x90 [i915]
       pci_device_probe+0x9c/0x120
       driver_probe_device+0x2a3/0x480
       __driver_attach+0xd9/0xe0
       bus_for_each_dev+0x57/0x90
       bus_add_driver+0x168/0x260
       driver_register+0x52/0xc0
       do_one_initcall+0x39/0x150
       do_init_module+0x56/0x1ef
       load_module+0x231c/0x2d70
       SyS_finit_module+0xa5/0xe0
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #0 (&dev->struct_mutex){+.+.}:
       lock_acquire+0xaf/0x200
       __mutex_lock+0x81/0x9b0
       i915_mutex_lock_interruptible+0x47/0x130 [i915]
       i915_gem_fault+0x201/0x760 [i915]
       __do_fault+0x15/0x70
       __handle_mm_fault+0x85b/0xe40
       handle_mm_fault+0x14f/0x2f0
       __do_page_fault+0x2d1/0x560
       page_fault+0x22/0x30

other info that might help us debug this:

Chain exists of:
  &dev->struct_mutex --> &sb->s_type->i_mutex_key#5 --> &mm->mmap_sem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&mm->mmap_sem);
                               lock(&sb->s_type->i_mutex_key#5);
                               lock(&mm->mmap_sem);
  lock(&dev->struct_mutex);

 *** DEADLOCK ***

1 lock held by debugfs_test/1351:
 #0:  (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560

stack backtrace:
CPU: 2 PID: 1351 Comm: debugfs_test Not tainted 4.15.0-rc2-CI-Patchwork_7428+ #1
Hardware name:                  /NUC6i5SYB, BIOS SYSKLi35.86A.0057.2017.0119.1758 01/19/2017
Call Trace:
 dump_stack+0x5f/0x86
 print_circular_bug+0x230/0x3b0
 check_prev_add+0x439/0x7b0
 ? lockdep_init_map_crosslock+0x20/0x20
 ? unwind_get_return_address+0x16/0x30
 ? __lock_acquire+0x1385/0x15a0
 __lock_acquire+0x1385/0x15a0
 lock_acquire+0xaf/0x200
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 __mutex_lock+0x81/0x9b0
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? __pm_runtime_resume+0x4f/0x80
 i915_gem_fault+0x201/0x760 [i915]
 __do_fault+0x15/0x70
 __handle_mm_fault+0x85b/0xe40
 handle_mm_fault+0x14f/0x2f0
 __do_page_fault+0x2d1/0x560
 page_fault+0x22/0x30
RIP: 0033:0x7f98d6f49116
RSP: 002b:00007ffd6ffc3278 EFLAGS: 00010283
RAX: 00007f98d39a2bc0 RBX: 0000000000000000 RCX: 0000000000001680
RDX: 0000000000001680 RSI: 00007ffd6ffc3400 RDI: 00007f98d39a2bc0
RBP: 00007ffd6ffc33a0 R08: 0000000000000000 R09: 00000000000005a0
R10: 000055e847c2a830 R11: 0000000000000002 R12: 0000000000000001
R13: 000055e847c1d040 R14: 00007ffd6ffc3400 R15: 00007f98d6752ba0

v2: Init preempt_work unconditionally (Chris)
v3: Mention that we need the enable_guc=1 for lockdep splat (Chris)

Testcase: igt/debugfs_test/read_all_entries # with i915.enable_guc=1
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-2-michal.winiarski@intel.com

drm/i915/guc: Move shared data allocation away from submission path

We need shared data for actions (e.g. guc suspend/resume), and we're
using those with GuC submission disabled.
Let's introduce intel_guc_init and move shared data alloc there.

This fixes GPF during module unload with HuC, but without GuC submission:

BUG: unable to handle kernel NULL pointer dereference at 000000005aee7809
IP: intel_guc_suspend+0x34/0x140 [i915]
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: i915(O-) netconsole x86_pkg_temp_thermal
intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel
mei_me i2c_i801 mei prime_numbers [last unloaded: i915]
CPU: 2 PID: 2794 Comm: rmmod Tainted: G     U  W  O 4.15.0-rc2+ #297
Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0054.2016.0930.1102 09/30/2016
task: 0000000055945c61 task.stack: 00000000264ccb43
RIP: 0010:intel_guc_suspend+0x34/0x140 [i915]
RSP: 0018:ffffc90000483df8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff880829180000 RCX: 0000000000000000
RDX: 0000000000000006 RSI: ffff880844c2c938 RDI: ffff880844c2c000
RBP: ffff880829180000 R08: 00000000a29c58c1 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa040ba40
R13: ffffffffa040bab0 R14: ffff88084a195060 R15: 000055df3ef357a0
FS:  00007ff43c043740(0000) GS:ffff88084e200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000f9 CR3: 000000083f179005 CR4: 00000000003606e0
Call Trace:
 i915_gem_suspend+0x9d/0x130 [i915]
 ? i915_driver_unload+0x68/0x180 [i915]
 i915_driver_unload+0x70/0x180 [i915]
 i915_pci_remove+0x15/0x20 [i915]
 pci_device_remove+0x36/0xb0
 device_release_driver_internal+0x15f/0x220
 driver_detach+0x3a/0x80
 bus_remove_driver+0x58/0xd0
 pci_unregister_driver+0x29/0x90
 SyS_delete_module+0x150/0x1e0
 entry_SYSCALL_64_fastpath+0x23/0x9a
RIP: 0033:0x7ff43b51b5c7
RSP: 002b:00007ffe6825a758 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007ff43b51b5c7
RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055df3ef35808
RBP: 0000000000000000 R08: 00007ffe682596d1 R09: 0000000000000000
R10: 00007ff43b594880 R11: 0000000000000206 R12: 000055df3ef357a0
R13: 00007ffe68259740 R14: 000055df3ef35260 R15: 000055df3ef357a0
Code: 00 00 02 74 03 31 c0 c3 53 48 89 fb 48 83 ec 10 e8 52 0f
f8 ff 48 b8 01 05 00 00 02 00 00 00 48 89 44 24 04 48 8b 83 00 12 00 00 <f6> 80
f9 00 00 00 01 0f 84 a7 00 00 00 f6 80 98 00 00 00 01 0f
RIP: intel_guc_suspend+0x34/0x140 [i915] RSP: ffffc90000483df8
CR2: 00000000000000f9
---[ end trace 23a192a61d937a3e ]---

Fixes: b8e5eb960b28 ("drm/i915/guc: Allocate separate shared data object for GuC communication")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-1-michal.winiarski@intel.com

drm/i915: Unwind i915_gem_init() failure

Since Michal introduced new user controllable errors other than -EIO
during i915_gem_init(), we need to actually unwind on the error path as
we have to abort the module load (and we expect to do so cleanly!).

As we now teardown key state and then mark the driver as wedged (on
EIO), we have to be careful to not allow ourselves to resume and
unwedge, thus attempting to use the uninitialised driver.

v2: Try not to free driver state for the suppressed EIO
v3: Use load-fault-injection to test both error/recovery paths.

References: 8620eb1dbbf2 ("drm/i915/uc: Don't use -EIO to report missing firmware")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213134347.4608-1-chris@chris-wilson.co.uk

drm/i915: Ratelimit request allocation under oom

If we fail to allocate a request, we can reap the outstanding requests
and push them to the request's slab's freelist before trying again. This
forces us to ratelimit malicious clients that tie up all of the system
resources in requests, instead of causing a system-wide oom.

Testcase: igt/gem_shrink/execbuf1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-3-chris@chris-wilson.co.uk

drm/i915: Allow fence allocations to fail

If a fence allocation fails in a blocking context, we will sleep on the
fence as a last resort. We can therefore allow ourselves to fail and
sleep on the fence instead of triggering a system-wide oom. This allows
us to throttle malicious clients that are consuming lots of system
resources by capping the amount of memory used by fences.

Testcase: igt/gem_shrink/execbufX
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-2-chris@chris-wilson.co.uk

drm/i915: Mark up potential allocation paths within i915_sw_fence as might_sleep

As kmalloc is allowed to block (if given the right flags), mark up the
two i915_sw_fence routines that may call kmalloc as potential sleeping
routines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-1-chris@chris-wilson.co.uk

drm/i915: Don't check #active_requests from i915_gem_wait_for_idle()

i915_gem_wait_for_idle() is called from inside the shrinker, to ensure
that we drain the last resources from the GPU in dire circumstances (OOM).
As we may allocate whilst building a request, it is then possible to hit
the shrinker with a request under construction, and so we must account
for the incomplete request whilst waiting. In particular, we
preincrement (in reserve_engine) the i915->gt.active_requests counter
and mark the GPU as busy, therefore we can not use that counter for
shortcircuiting the wait-for-idle.

[  950.859024] GEM_BUG_ON(i915->gt.active_requests)
[  950.859041] WARNING: CPU: 2 PID: 2178 at drivers/gpu/drm/i915/i915_gem.c:3615 i915_gem_wait_for_idle.part.56+0x166/0x4e0
[  950.859041] Modules linked in: ccm tun fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_mangle iptable_security iptable_raw arc4 iwldvm mac80211 snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec btusb snd_hda_core btrtl btbcm iwlwifi snd_hwdep btintel bluetooth snd_seq snd_seq_device snd_pcm ecdh_generic x86_pkg_temp_thermal tpm_infineon coretemp tpm_tis crc32_pclmul wmi_bmof crc32c_intel iTCO_wdt hp_wmi snd_timer iTCO_vendor_support sparse_keymap tpm_tis_core mei_me cfg80211
[  950.859082]  snd joydev tpm mei rfkill pcspkr wmi soundcore lpc_ich hp_accel lis3lv02d input_polldev binfmt_misc e1000e ptp serio_raw pps_core
[  950.859094] CPU: 2 PID: 2178 Comm: gem_exec_nop Tainted: G     U           4.15.0-rc2+ #900
[  950.859102] Hardware name: Hewlett-Packard HP ProBook 6360b/1620, BIOS 68SCF Ver. B.42 12/29/2010
[  950.859107] task: c5119cb4 task.stack: f3ccb8d8
[  950.859112] EIP: i915_gem_wait_for_idle.part.56+0x166/0x4e0
[  950.859113] EFLAGS: 00010296 CPU: 2
[  950.859114] EAX: 00000024 EBX: f36c1888 ECX: f777a044 EDX: 00000007
[  950.859115] ESI: f36c1888 EDI: edd53958 EBP: edd53970 ESP: edd53938
[  950.859116]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  950.859117] CR0: 80050033 CR2: b7f39000 CR3: 2f2b3000 CR4: 000406d0
[  950.859118] Call Trace:
[  950.859125]  ? drm_printk+0x70/0x70
[  950.859129]  i915_gem_wait_for_idle+0x18/0x30
[  950.859133]  i915_gem_shrink+0x360/0x410
[  950.859138]  ? vmpressure+0xa8/0xf0
[  950.859142]  ? ktime_get+0x4a/0x100
[  950.859147]  i915_gem_shrink_all+0x21/0x40
[  950.859151]  i915_gem_shrinker_oom+0x23/0x130
[  950.859156]  notifier_call_chain+0x4e/0x70
[  950.859160]  __blocking_notifier_call_chain+0x2f/0x60
[  950.859164]  blocking_notifier_call_chain+0x11/0x20
[  950.859169]  out_of_memory+0x207/0x280
[  950.859174]  __alloc_pages_nodemask+0xd47/0xe60
[  950.859179]  new_slab+0x32d/0x450
[  950.859183]  ___slab_alloc.constprop.81+0x358/0x4e0
[  950.859189]  ? i915_sw_fence_await_dma_fence+0x53/0x160
[  950.859193]  ? __slab_free+0x1fe/0x310
[  950.859197]  ? native_sched_clock+0x1e/0xc0
[  950.859201]  ? i915_gem_request_alloc+0xcf/0x510
[  950.859205]  ? sched_clock+0x9/0x10
[  950.859209]  __slab_alloc.constprop.80+0x29/0x40
[  950.859212]  ? __slab_alloc.constprop.80+0x29/0x40
[  950.859216]  kmem_cache_alloc_trace+0x160/0x1a0
[  950.859220]  ? i915_sw_fence_await_dma_fence+0x53/0x160
[  950.859224]  i915_sw_fence_await_dma_fence+0x53/0x160
[  950.859229]  i915_gem_request_await_dma_fence+0x1eb/0x390
[  950.859233]  i915_gem_request_await_object+0xee/0x230
[  950.859239]  i915_gem_do_execbuffer+0xc16/0x1200
[  950.859246]  ? irqtime_account_irq+0x3e/0xc0
[  950.859251]  ? irq_exit+0x4f/0xb0
[  950.859257]  ? smp_apic_timer_interrupt+0x5f/0x110
[  950.859261]  ? apic_timer_interrupt+0x35/0x3c
[  950.859266]  i915_gem_execbuffer2_ioctl+0x212/0x440
[  950.859270]  ? apic_timer_interrupt+0x35/0x3c
[  950.859274]  ? i915_gem_do_execbuffer+0x1200/0x1200
[  950.859279]  ? insn_get_seg_base+0x1b/0x50
[  950.859283]  ? i915_gem_do_execbuffer+0x1200/0x1200
[  950.859287]  drm_ioctl_kernel+0x51/0xa0
[  950.859291]  drm_ioctl+0x2a3/0x350
[  950.859294]  ? i915_gem_do_execbuffer+0x1200/0x1200
[  950.859300]  ? sched_clock+0x9/0x10
[  950.859303]  ? drm_getunique+0x70/0x70
[  950.859308]  do_vfs_ioctl+0x7d/0x640
[  950.859311]  ? native_sched_clock+0x1e/0xc0
[  950.859315]  ? sched_clock+0x9/0x10
[  950.859319]  ? sched_clock_cpu+0x13/0x120
[  950.859323]  SyS_ioctl+0x4e/0x80
[  950.859326]  do_fast_syscall_32+0x75/0x250
[  950.859331]  ? irq_exit+0x4f/0xb0
[  950.859334]  entry_SYSENTER_32+0x47/0x71
[  950.859338] EIP: 0xb7f81d11
[  950.859339] EFLAGS: 00000296 CPU: 2
[  950.859340] EAX: ffffffda EBX: 00000003 ECX: 40406469 EDX: bfde4c20
[  950.859340] ESI: 00000003 EDI: 40406469 EBP: 00000003 ESP: bfde4b38
[  950.859341]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[  950.859343] Code: e8 30 60 01 00 83 c4 10 83 c3 04 39 f3 75 e0 8b 45 d8 8b 80 14 37 00 00 85 c0 74 13 68 dd 33 e4 c0 68 49 6f e3 c0 e8 4a 55 be ff <0f> ff 5e 5f b8 fe ff ff 3f bb 0a 00 00 00 e8 b7 14 c4 ff 8b 15

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212132148.8124-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/fence: Use rcu to defer freeing of irq_work

It is illegal to perform an immediate free of the struct irq_work from
inside the irq_work callback (as irq_work_run_list modifies work->flags
after execution of the work->func()). As we use the irq_work to
coordinate the freeing of the callback from two different softirq paths,
we need to defer the kfree from inside our irq_work callback, for which
we can use kfree_rcu.

Fixes: 81c0ed21aa91 ("drm/i915/fence: Avoid del_timer_sync() from inside a timer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213094802.28243-1-chris@chris-wilson.co.uk

drm/i915: Dump the engine state before declaring wedged from wait_for_engines()

If wait_for_engines() fails and we resort to declaring the HW wedged,
dump the engine state for debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-2-chris@chris-wilson.co.uk

drm/i915: Bump timeout for wait_for_engines()

Extract the timeout we use in i915_gem_idle_work_handler() and reuse it
for wait_for_engines() in i915_gem_wait_for_idle(). It too has the same
problem in sometimes having to wait for an extended period before the HW
settles, so make use of the same timeout.

References: 5427f207852d ("drm/i915: Bump wait-times for the final CS interrupt before parking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-1-chris@chris-wilson.co.uk

drm/i915: Downgrade misleading "Memory usable" message

It never meant what it said, as it was always the total size of the
Global GTT and not a limit upon memory usage. Originally it served as a
quick guide to the largest batch that could be submitted by userspace,
an approximation to its maximum RSS, but was phrased badly. Today with
the 48b ppgtt, it is even more meaningless. Replace with a more specific
debug message; those wanting to know how much "video ram" they have
should consult the userspace libraries for the relevant approximation.

v2: Rebase

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212113532.22574-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Print an error message for a reset failure on gen2

Since on gen2, we do not universally have a GPU reset implementation, we
fail i915_reset() at intel_has_gpu_reset(). However, this is also
intentionally disabled for CI testing and so it only has a debug
message. Promote that debug message to a user-facing error message that
should explain why their machine became unusable following the GPU hang.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211204040.22858-1-chris@chris-wilson.co.uk

docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c

With commit d9e2e0143c the 'GuC-specific firmware loader' doc
section was removed from intel_guc_loader.c without a
replacement.  So lets remove it from the Kernel-doc::

  .. kernel-doc:: drivers/gpu/drm/i915/intel_guc_loader.c
     :doc: GuC-specific firmware loader

With commit e8668bbcb0 intel_guc_loader.c was renamed to to
intel_guc_fw.c and to name just one, intel_guc_init_hw() was
renamed to intel_guc_fw_upload(). Since we get errors in the
Sphinx build like:

- Error: Cannot open file ./drivers/gpu/drm/i915/intel_guc_loader.c

Change the kernel-doc directive from intel_guc_loader.c to
intel_guc_fw.c

Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
[danvet: Rebase onto the partial fix 006c23327f8d
("documentation/gpu/i915: fix docs build error after file rename")]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1513078717-12373-1-git-send-email-markus.heiser@darmarit.de

drm/i915: prefer resource_size_t for everything stolen

Keeps things consistent now that we make use of struct resource. This
should keep us covered in case we ever get huge amounts of stolen
memory.

v2: bunch of missing conversions (Chris)

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-10-matthew.auld@intel.com

drm/i915: give stolen_usable_size a more suitable home

Kick it out of i915_ggtt and keep it grouped with dsm and dsm_reserved,
where it makes the most sense.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-9-matthew.auld@intel.com

drm/i915: make mappable struct resource centric

Now that we are using struct resource to track the stolen region, it is
more convenient if we track the mappable region in a resource as well.

v2: prefer iomap and gmadr naming scheme
    prefer DEFINE_RES_MEM

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-8-matthew.auld@intel.com

drm/i915: make reserved struct resource centric

Now that we are using struct resource to track the stolen region, it is
more convenient if we track the reserved portion of that region in a
resource as well.

v2: s/<= end + 1/< end/ (Chris)
v3: prefer DEFINE_RES_MEM

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-7-matthew.auld@intel.com

drm/i915: make dsm struct resource centric

Now that we are using struct resource to track the stolen region, it is
more convenient if we track dsm in a resource as well.

v2: check range_overflow when writing to 32b registers (Chris)
    pepper in some comments (Chris)
v3: refit i915_stolen_to_dma()
v4: kill ggtt->stolen_size
v5: some more polish

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-6-matthew.auld@intel.com

drm/i915: nuke the duplicated stolen discovery

We duplicate the stolen discovery code in early-quirks and in i915,
however now that the stolen region is exported as a resource from
early-quirks we can nuke the duplication.

v2: check overflows_type

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-5-matthew.auld@intel.com

x86/early-quirks: replace the magical increment start values

Replace the magical +2, +9 etc. with +MB, which is far easier to read.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-4-matthew.auld@intel.com

x86/early-quirks: export the stolen region as a resource

We duplicate the stolen discovery code in early-quirks and in i915,
however if we just export the region as a resource from early-quirks we
can nuke the duplication.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-3-matthew.auld@intel.com

x86/early-quirks: Extend Intel graphics stolen memory placement to 64bit

To give upcoming SKU BIOSes more flexibility in placing the Intel
graphics stolen memory, make all variables storing the placement or size
compatible with full 64 bit range.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-2-matthew.auld@intel.com

drm/i915: Only report a wakeup if the waiter was truly asleep

If we attempt to wake up a waiter, who is currently checking the seqno
it will be in the TASK_INTERRUPTIBLE state and ttwu will report success.
However, it is actually awake and functioning -- so delay reporting the
actual wake up until it sleeps. This fixes some spurious claims of
missed_breadcrumbs when running under heavy load; i.e. sufficient load to
preempt away the newly woken waiter before they complete their checks.
However, it does so at the cost of a rare false negative; where the
waiter changes between the check and ttwu -- the only way to fix that
would be to extend the reporting from ttwu where the check could be done
atomically.

v2: Defend against !CONFIG_SMP
v3: Don't filter out calls to wake_up_process
v4: Drop risky microoptimisation to skip wakeups

Testcase: igt/drv_missed_irq # sanity check we do detect missed_breadcrumb()
Testcase: igt/gem_concurrent_blit # for generating false positives
References: https://bugs.freedesktop.org/show_bug.cgi?id=100007
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209124710.1606-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Stop listening to request resubmission from the signaler kthread

The intent here was that we would be listening to
i915_gem_request_unsubmit in order to cancel the signaler quickly and
release the reference on the request. Cancelling the signaler is done
directly via intel_engine_cancel_signaling (called from unsubmit), but
that does not directly wake up the signaling thread, and neither does
setting the request->global_seqno back to zero wake up listeners to the
request->execute waitqueue. So the only time that listening to the
request->execute waitqueue would wake up the signaling kthread would be
on the request resubmission, during which time we would already receive
wake ups from rejoining the global breadcrumbs wait rbtree.

Trying to wake up to release the request remains an issue. If the
signaling was cancelled and no other request required signaling, then it
is possible for us to shutdown with the reference on the request still
held. To ensure that we do not try to shutdown, leaking that request, we
kick the signaling threads whenever we disarm the breadcrumbs, i.e. on
parking the engine when idle.

v2: We do need to be sure to release the last reference on stopping the
kthread; asserting that it has been dropped already is insufficient.

Fixes: d6a2289d9d6b ("drm/i915: Remove the preempted request from the execution queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208121033.5236-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>

drm/i915/selftests: Free mock_i915->drm.mode_config

Even for the mock i915 device, we need to initialise the
drm.mode_config, as we may ultimately query whether there are any KMS
users deep in the bowels of some paths (e.g. eviction). As we initialise
drm.mode_config we must cleanup after ourselves!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209210835.32609-1-chris@chris-wilson.co.uk

agp/intel: Flush all chipset writes after updating the GGTT

Before accessing the GGTT we must flush the PTE writes and make them
visible to the chipset, or else the indirect access may end up in the
wrong page. In commit 3497971a71d8 ("agp/intel: Flush chipset writes
after updating a single PTE"), we noticed corruption of the uploads for
pwrite and for capturing GPU error states, but it was presumed that the
explicit calls to intel_gtt_chipset_flush() were sufficient for the
execbuffer path. However, we have not been flushing the chipset between
the PTE writes and access via the GTT itself.

For simplicity, do the flush after any PTE update rather than try and
batch the flushes on a just-in-time basis.

References: 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.uk

drm/i915: Stop showing seqno info from debugfs/i915_interrupt_info

Since the seqno information shown from i915_interrupt_info is just a
small subset of i915_engine_info, remove it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209104418.4223-2-chris@chris-wilson.co.uk

drm/i915: Remove debugfs/i915_seqno_info

The per-engine seqno info is now available from
debugfs/i915_engine_info obsoleting debugfs/i915_seqno_info, so remove it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209104418.4223-1-chris@chris-wilson.co.uk

drm/i915: Add is-wedged flag to intel_engine_dump()

Comparing the state tested by intel_engine_is_idle() and printed by
intel_engine_dump(), the only bit not shown is whether or not the device
is wedged. Add that little bit of information to the pretty printer so
that if the engine fails to idle we can see why.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-5-chris@chris-wilson.co.uk

drm/i915: Include the global reset count for intel_engine_dump()

Since a global reset affects the engine, include that along side the
per-engine reset counter when pretty printing the engine state in
intel_engine_dump().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-4-chris@chris-wilson.co.uk

drm/i915: Include engine state on detecting a missed breadcrumb/seqno

Now that we have a common engine state pretty printer, we can use that
instead of the adhoc information printed when we miss a breadcrumb.

v2: Rearrange intel_engine_disarm_breadcrumbs() to avoid calling
intel_engine_dump() under the rb spinlock (Mika) and to pretty-print the
error state early so that we include the full list of waiters.
v3: Pass missed breadcrumb msg to pretty-printer as the header
v4: Preserve DRM_DEBUG_DRIVER filtering.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-3-chris@chris-wilson.co.uk

drm/i915: Make engine state pretty-printer header configurable

Pass in a format string (and args) to specify the header to be emitted
along with the engine state when pretty-printing. This allows the header
to be emitted inside the drm_printer stream, so sharing the same prefix
and output characteristics (e.g. debug level and filtering).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-2-chris@chris-wilson.co.uk

drm/i915: Use snprintf to avoid line-break when pretty-printing engines

When printing the execlist ports, we first print the ELSP header then
follow it with the pretty-printed request. Since switching to
drm_printer and show the output via printk, it automatically appends a
newline to each call (unlike the old seq_printf output). To avoid the
unwanted line break, construct the ELSP request header in a temporary
buffer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-1-chris@chris-wilson.co.uk

Merge airlied/drm-next into drm-intel-next-queued

Chris requested this backmerge for a reconciliation on
drm_print.h between drm-misc-next and drm-intel-next-queued

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Drop fb reference on load_detect_pipe failure path

When intel_modeset_setup_plane_state() fails drop the local framebuffer
reference before jumping to the error, otherwise we leak the framebuffer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: edde361711ef ("drm/i915: Use atomic state to obtain load detection crtc, v3.")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207220025.22698-1-chris@chris-wilson.co.uk

intel/atomic: Stop updating legacy fb parameters

Even fbc isn't using this stuff anymore, so time to remove it.

Cleaning up one small piece of the atomic conversion cruft at the time
...

Quick explanation on why the plane->fb assignment is ok to delete: The
core code takes care of the refcounting and legacy ->fb pointer
updating, but drivers are allowed to update it ahead of time. Most
legacy modeset drivers did that as part of their set_config callback
(since that's how the legacy/crtc helpers worked). In i915 we only
need that to make the fbc code happy.

v2: don't nuke the assignement of intel_crtc->config, I accidentally
set CI ablaze :-) Spotted by Maarten. And better explain why nuking
the ->fb assignement shouldn't set off alarm bells.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207143202.6021-1-daniel.vetter@ffwll.ch

drm/i915: Restore GT performance in headless mode with DMC loaded

It seems that the DMC likes to transition between the DC states a lot when
there are no connected displays (no active power domains) during command
submission.

This activity on DC states has a negative impact on the performance of the
chip with huge latencies observed in the interrupt handlers and elsewhere.
Simple tests like igt/gem_latency -n 0 are slowed down by a factor of
eight.

Work around it by introducing a new power domain named,
POWER_DOMAIN_GT_IRQ, associtated with the "DC off" power well, which is
held for the duration of command submission activity.

CNL has the same problem which will be addressed as a follow-up. Doing
that requires a fix for a DC6 context corruption problem in the CNL DMC
firmware which is yet to be released.

v2:
 * Add commit text as comment in i915_gem_mark_busy. (Chris Wilson)
 * Protect macro body with braces. (Jani Nikula)

v3:
 * Add dedicated power domain for clarity. (Chris, Imre)
 * Commit message and comment text updates.
 * Apply to all big-core GEN9 parts apart for Skylake which is pending DMC
   firmware release.

v4:
 * Power domain should be inner to device runtime pm. (Chris)
 * Simplify NEEDS_CSR_GT_PERF_WA macro. (Chris)
 * Handle async DMC loading by moving the GT_IRQ power domain logic into
   intel_runtime_pm. (Daniel, Chris)
 * Include small core GEN9 as well. (Imre)

v5
 * Special handling for async DMC load is not needed since on failure the
   power domain reference is kept permanently taken. (Imre)

v6:
 * Drop the NEEDS_CSR_GT_PERF_WA macro since all firmwares have now been
   deployed. (Imre, Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100572
Testcase: igt/gem_exec_nop/headless
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v5)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Imre: Add note about applying the WA on CNL as a follow-up]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205132854.26380-1-tvrtko.ursulin@linux.intel.com

drm/i915/execlists: Cache ELSP register offset

Currently on every submission, we recalculate the ELSP register offset
for the engine, after chasing the pointers to find the iomem base. Since
this is fixed for the lifetime of the driver, record the offset in the
execlists struct.

In practice the difference is negligible, it just happens to remove 27
bytes of eyesore pointer dancing from next to the hottest instruction
(which is itself due to stalling for a cache miss) in perf profiles of
the execlists_submission_tasklet().

v2: Trim off one more elsp local.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207222434.17686-1-chris@chris-wilson.co.uk

drm/i915: Refactor common list iteration over GGTT vma

In quite a few places, we have a list iteration over the vma on an
object that only want to inspect GGTT vma. By construction, these are
placed at the start of the list, so we have copied that knowledge into
many callsites. Pull that knowledge back to i915_vma.h and provide a
for_each_ggtt_vma() to tidy up the code.

v2: Add a backreference from vma_create() to remind ourselves why we put
ggtt vma at the head of the obj->vma_list (and ppgtt vma at the tail).
v3: Fixup s/vma/V/

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207211407.31549-1-chris@chris-wilson.co.uk

Merge tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

[airlied: fix conflict in intel_dsi.c]

drm-intel-next-2017-12-01:

- Init clock gate fix (Ville)
- Execlists event handling corrections (Chris, Michel)
- Improvements on GPU Cache invalidation and context switch (Chris)
- More perf OA changes (Lionel)
- More selftests improvements and fixes (Chris, Matthew)
- Clean-up on modules parameters (Chris)
- Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris)
- More Cannonlake stabilization effort (David, James)
- Display planes clean-up and improvements (Ville)
- New PMU interface for perf queries... (Tvrtko)
- ... and other subsequent PMU changes and fixes (Tvrtko, Chris)
- Remove success dmesg noise from rotation (Chris)
- New DMC for Kabylake (Anusha)
- Fixes around atomic commits (Daniel)
- GuC updates and fixes (Sagar, Michal, Chris)
- Couple gmbus/i2c fixes (Ville)
- Use exponential backoff for all our wait_for() (Chris)
- Fixes for i915/fbdev (Chris)
- Backlight fixes (Arnd)
- Updates on shrinker (Chris)
- Make Hotplug enable more robuts (Chris)
- Disable huge pages (TPH) on lack of a needed workaround (Joonas)
- New GuC images for SKL, KBL, BXT (Sagar)
- Add HW Workaround for Geminilake performance (Valtteri)
- Fixes for PPS timings (Imre)
- More IPS fixes (Maarten)
- Many fixes for Display Port on gen2-gen4 (Ville)
- Retry GPU reset making the recover from hang more robust (Chris)

* tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel: (101 commits)
  drm/i915: Update DRIVER_DATE to 20171201
  drm/i915/cnl: Mask previous DDI - PLL mapping
  drm/i915: Remove unsafe i915.enable_rc6
  drm/i915: Sleep and retry a GPU reset if at first we don't succeed
  drm/i915: Interlaced DP output doesn't work on VLV/CHV
  drm/i915: Pass crtc state to intel_pipe_{enable,disable}()
  drm/i915: Wait for pipe to start on i830 as well
  drm/i915: Fix vblank timestamp/frame counter jumps on gen2
  drm/i915: Fix deadlock in i830_disable_pipe()
  drm/i915: Fix has_audio readout for DDI A
  drm/i915: Don't add the "force audio" property to DP connectors that don't support audio
  drm/i915: Disable DP audio for g4x
  drm/i915/selftests: Wake the device before executing requests on the GPU
  drm/i915: Set fake_vma.size as well as fake_vma.node.size for capture
  drm/i915: Tidy up signed/unsigned comparison
  drm/i915: Enable IPS with only sprite plane visible too, v4.
  drm/i915: Make ips_enabled a property depending on whether IPS is enabled, v3.
  drm/i915: Avoid PPS HW/SW state mismatch due to rounding
  drm/i915: Skip switch-to-kernel-context on suspend when wedged
  drm/i915/glk: Apply WaProgramL3SqcReg1DefaultForPerf for GLK too
  ...

Merge tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

UAPI Changes:

- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)

Core Changes:

- misc doc and bug fixes

Driver Changes:

- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)

* tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc: (50 commits)
  drm/sun4i: Fix uninitialized variables in vi layer
  drm/fb-helper: Fix potential NULL pointer dereference
  gpu: drm: stm: Adopt SPDX identifiers
  gpu: drm: sti: Adopt SPDX identifiers
  drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()
  drm/sun4i: Wire in DE2 YUV support
  drm/sun4i: Expand DE2 scaler lib with YUV support
  drm/sun4i: Add DE2 definitions for YUV formats
  drm/sun4i: Add DE2 CSC library
  drm/sun4i: Add CCSC property to DE2 configuration
  drm/sun4i: Add support for HW scaling to DE2
  drm/sun4i: Add scaler configuration to DE2 mixers
  drm/sun4i: Add support for DE2 VI planes
  drm/sun4i: Reorganize UI layer code in DE2
  drm/sun4i: Add support for all HW supported DE2 RGB formats
  drm/sun4i: Add multi plane support to DE2 driver
  drm/sun4i: Move interlace related code in DE2
  drm/sun4i: Move channel size related code in DE2
  drm/sun4i: Move line width setting in DE2
  drm/sun4i: Use values calculated by atomic check
  ...

drm/i915: Track GGTT writes on the vma

As writes through the GTT and GGTT PTE updates do not share the same
path, they are not strictly ordered and so we must explicitly flush the
indirect writes prior to modifying the PTE. We do track outstanding GGTT
writes on the object itself, but since the object may have multiple GGTT
vma, that is overly coarse as we can track and flush individual vma as
required.

Whilst here, update the GGTT flushing behaviour for Cannonlake.

v2: Hard-code ring offset to allow use during unload (after RCS may have
been freed, or never existed!)

References: https://bugs.freedesktop.org/show_bug.cgi?id=104002
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206124914.19960-2-chris@chris-wilson.co.uk

drm/i915: Remove vma from object on destroy, not close

Originally we translated from the object to the vma by walking
obj->vma_list to find the matching vm (for user lookups). Now we process
user lookups using the rbtree, and we only use obj->vma_list itself for
maintaining state (e.g. ensuring that all vma are flushed or rebound).
As such maintenance needs to go on beyond the user's awareness of the
vma, defer removal of the vma from the obj->vma_list from i915_vma_close()
to i915_vma_destroy()

Fixes: 5888fc9eac3c ("drm/i915: Flush pending GTT writes before unbinding")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104155
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206124914.19960-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/sun4i: Fix uninitialized variables in vi layer

min_scale and max_scale in sun8i_vi_layer_atomic_check() can be used
without initialization.

Fix that.

Fixes: b862a648de3b ("drm/sun4i: Add support for HW scaling to DE2")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206152603.25937-1-jernej.skrabec@siol.net

drm/fb-helper: Fix potential NULL pointer dereference

fb_helper is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.

Fix this by moving the pointer dereference after fb_helper
has been null checked.

This issue was detected with the help of Coccinelle.

Fixes: c777990fb45b ("drm/fb-helper: Handle function NULL argument")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205174628.GA31189@embeddedor.com

Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next

First feature request for 4.16.  Highlights:
- RV and Vega header cleanups
- TTM operation context support
- 48 bit GPUVM fixes for Vega/RV
- More smatch fixes
- ECC support for vega10
- Resizeable BAR support
- Multi-display sync support in DC
- SR-IOV fixes
- Various scheduler improvements
- GPU reset fixes and vram lost tracking
- Clean up DC/powerplay interfaces
- DCN display fixes
- Various DC fixes

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (291 commits)
  drm/radeon: Use drm_fb_helper_lastclose() and _poll_changed()
  drm/amdgpu: Use drm_fb_helper_lastclose() and _poll_changed()
  drm/amd/display: Use drm_fb_helper_poll_changed()
  drm/ttm: swap consecutive allocated pooled pages v4
  drm/amdgpu: fix amdgpu_sync_resv v2
  drm/ttm: swap consecutive allocated cached pages v3
  drm/amd/amdgpu: set gtt size according to system memory size only
  drm/amdgpu: Get rid of dep_sync as a seperate object.
  drm/amdgpu: allow specifying vm_block_size for multi level PDs v2
  drm/amdgpu: move validation of the VM size into the VM code
  drm/amdgpu: allow non pot VM size values
  drm/amdgpu: choose number of VM levels based on VM size
  drm/amdgpu: unify VM size handling of Vega10 with older generation
  drm/amdgpu: fix amdgpu_vm_num_entries
  drm/amdgpu: fix VM PD addr shift
  drm/amdgpu: correct vce4.0 fw config for SRIOV (V2)
  drm/amd/display: Don't call dm_log_to_buffer directly in dc_conn_log
  drm/amd/display: Add dm_logger_append_va API
  drm/ttm: Use a static string instead of an array of char *
  drm/amd/display: remove usage of legacy_cursor_update
  ...

drm/radeon: Use drm_fb_helper_lastclose() and _poll_changed()

This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use drm_fb_helper_lastclose() and _poll_changed()

This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Remove the unused driver implementations.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use drm_fb_helper_poll_changed()

This driver can use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: swap consecutive allocated pooled pages v4

When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.

v2: use swap
v3: check if it's really the first allocated page
v4: don't touch the loop variable

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix amdgpu_sync_resv v2

Fixes a bug introduced by AMDGPU_GEM_CREATE_EXPLICIT_SYNC. We still need
to wait for pipelined moves in the shared fences list.

v2: fix typo

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: swap consecutive allocated cached pages v3

When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.

v2: use swap
v3: check if it's really the first allocated page

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: set gtt size according to system memory size only

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Get rid of dep_sync as a seperate object.

Instead mark fence as explicit in it's amdgpu_sync_entry.

v2:
Fix use after free bug and add new parameter description.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow specifying vm_block_size for multi level PDs v2

This patch allows specifying the vm_block_size even when multi level
page directories are active.

v2: fix signed/unsigned compare warning

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move validation of the VM size into the VM code

This moves validation of the VM size parameter into amdgpu_vm_adjust_size().

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow non pot VM size values

The VM size actually doesn't need to be a power of two.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: choose number of VM levels based on VM size

This allows us limiting the VM size for testing even of Vega10.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: unify VM size handling of Vega10 with older generation

One function to rule them all.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix amdgpu_vm_num_entries

The block size only affects the leave nodes, everything else is fixed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix VM PD addr shift

The block size only affects the leave nodes, everything else is fixed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct vce4.0 fw config for SRIOV (V2)

1. program vce 4.0 fw with 48 bit address
2. correct vce 4.0 fw stack and date offset

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't call dm_log_to_buffer directly in dc_conn_log

dm_log_to_buffer logs unconditionally, so calling it directly resulted
in the main message being logged even when the event type isn't enabled
in the event mask.

To fix this, use the new dm_logger_append_va API.

Fixes spurious messages like

 [drm] {1920x1200, 2080x1235@154000Khz}

in dmesg when a mode is set.

v2:
* Use new dm_logger_append_va API, fixes incorrect va_list usage in v1
* Just use and decrease entry.buf_offset to get rid of the trailing
  newline

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dm_logger_append_va API

Same as dm_logger_append, except it takes a va_list instead of a
variable number of arguments. dm_logger_append is now a minimal wrapper
around dm_logger_append_va.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Use a static string instead of an array of char *

Make the object a bit smaller by using a simple string instead
of a format string and array of char *.

$ size drivers/gpu/drm/ttm/ttm_page_alloc_dma.o*
   text    data     bss     dec     hex filename
   8820     216    4136   13172    3374 drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.defconfig.new
   8910     216    4136   13262    33ce drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.defconfig.old
  25383    5044    4384   34811    87fb drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.allyesconfig.new
  25797    5428    4384   35609    8b19 drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.allyesconfig.old

Miscellanea:

o The h array had more entries than were emitted, all are now removed

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove usage of legacy_cursor_update

Currently the atomic check code uses legacy_cursor_update
to differnetiate if the cursor plane is being requested by
the user, which is not required as we shall be updating
plane only if modeset is requested/required.

Have tested cursor plane and underlay get updated seamlessly,
without any lag or frame drops.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 vcn header files.

Cleanup asic_reg/raven1/VCN folder. Remove unused vcn_1_0_default.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 thm header files.

Cleanup asic_reg/raven1/THM folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 nbio header files.

Cleanup asic_reg/raven1/NBIO folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 mp header files.

Cleanup asic_reg/raven1/MP folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 mmhub header files.

Cleanup asic_reg/raven1/MMHUB folder.Remove unused mmhub_9_1_default.h

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 gc header files.

Cleanup asic_reg/raven1/GC folder. Remove unused files:
    gc_9_1_default.h  gc_9_1_sh_mask.h

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 dcn header files.

Cleanup asic_reg/raven1/DCN folder.Remove unused
dcn_1_0_default.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 sdma header files.

Cleanup asic_reg/raven1/SDMA0 folder.Remove unused sdma0_4_1_sh_mask.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 header files.

Remove asic_reg/vega10 folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 osssys header files.

Cleanup asic_reg/vega10/OSSSYS folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 smuio header files.

Cleanup asic_reg/vega10/SMUIO folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 nbif header files.

Cleanup asic_reg/vega10/NBIF folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 nbio header files.

Cleanup asic_reg/vega10/NBIO folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 mmhub header files.

Cleanup asic_reg/vega10/MMHUB folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 gc header files.

Cleanup asic_reg/vega10/GC folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 vce header files.

Cleanup asic_reg/vega10/VCE folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 uvd header files.

Cleanup asic_reg/vega10/UVD folder,remove unused uvd_7_0_default.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 dce header files.

Cleanup asic_reg/vega10/DC folder.Remove dce_12_0_default.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include: cleanup vega10 umc header files.

Remove asic/vega10/UMC folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 thm header files.

Cleanup asic_reg/vega10/THM folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 athub header files.

Cleanup asic_reg/vega10/ATHUB folder,remove unused files.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 mp header files.

Cleanup asic_reg/vega10/MP folder, remove mp_9_0_default.h

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 hdp header files.

Cleanup asic_reg/vega10/HDP folder, remove hdp_4_0_default.h

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 sdma0/1 header files.

To remove include/asic_reg/vega10 folder,create IP folders sdma0/1.
This patch cleanup asic_reg/vega10/SDMA folders.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:partially revert 1cfd8e237f0318e330190ac21d63c58ae6a1f66c

found RING0 test fail after S3 resume regression, which is
introduced by 1cfd8e237f0318e330190ac21d63c58ae6a1f66c

Because after suspend VRAM will be cleared, so driver must
unpin the GART table(resident in VRAM) during suspend so it
can be evicted to system ram and must correspondingly pin it
during resume so the GART table could be restored to VRAM.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: roundup the shrink request to prevent skip huge pool

e.g. shrink reqeust is less than 512, the logic will skip huge pool

Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add page order support in ttm_pages_put

Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>