Florian Fainelli [Sat, 13 Dec 2014 08:08:30 +0000 (08:08 +0000)]
netlogic: fix XLR network driver build
Backport an upstream submission to fix xlr_net
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43682
John Crispin [Sat, 13 Dec 2014 08:07:03 +0000 (08:07 +0000)]
ramips:Add support for Aigale Ai-BR100
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 43681
John Crispin [Sat, 13 Dec 2014 08:06:22 +0000 (08:06 +0000)]
mxs: indention and whitespace fixes
Align this file with the style of most other modules.mk.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43680
John Crispin [Sat, 13 Dec 2014 08:06:01 +0000 (08:06 +0000)]
ar71xx: add an extra check on board_name for ath10k firmware patchs
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.
SVN-Revision: 43679
John Crispin [Sat, 13 Dec 2014 08:04:54 +0000 (08:04 +0000)]
oxnas: fix gpio-fan on kd20
define speed-map and include kmod-hwmon-gpiofan in kd20 profile
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43678
John Crispin [Sat, 13 Dec 2014 08:02:52 +0000 (08:02 +0000)]
oxnas: also make use of the GPIO poweroff driver
Works great to power-off the kd20 ;)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43677
John Crispin [Sat, 13 Dec 2014 08:00:22 +0000 (08:00 +0000)]
kernel/generic: remove some left-over garbage from ledtrig patch
cosmetics. clean a style issue introduced by r43674.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43676
John Crispin [Fri, 12 Dec 2014 20:24:33 +0000 (20:24 +0000)]
oxnas: use libata ledtrig support for kd20 hdd leds
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43675
John Crispin [Fri, 12 Dec 2014 20:24:21 +0000 (20:24 +0000)]
kernel/generic: add ledtrig support to libata
SVN-Revision: 43674
John Crispin [Fri, 12 Dec 2014 20:24:13 +0000 (20:24 +0000)]
oxnas: clean up default package selection
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43673
Felix Fietkau [Fri, 12 Dec 2014 18:28:13 +0000 (18:28 +0000)]
kernel.mk: Handle the x86_64 LINUX_KARCH case
x64 is handled by the x86 architecture in Linux, add a case for it in
LINUX_KARCH.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43672
Felix Fietkau [Fri, 12 Dec 2014 18:28:03 +0000 (18:28 +0000)]
kernel.mk: Refactor LINUX_KARCH affectation
Switch to a dumber implementation that will be easier to maintain in the long
run, with only if statements instead of having nested subst calls.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43671
John Crispin [Fri, 12 Dec 2014 17:14:14 +0000 (17:14 +0000)]
kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43670
Felix Fietkau [Fri, 12 Dec 2014 17:01:57 +0000 (17:01 +0000)]
gcc: don't clobber stamp-bits with a symlink to itself
Several versions of gcc have an issue in libstdc++v3 where the build may
clobber stamp-bits with a link to itself. This doesn't manifest itself
on all systems. On several Ubuntu systems, this doesn't appear to be a
problem, but it is an issue on Fedora 16 systems.
To fix the issue, we'll simply filter out stamp-bits from the symlinks
to be generated.
Note: gcc 4.4.7 is unaffected by this issue, so no fix is necessary
there.
Signed-off-by: John Szakmeister <john@szakmeister.net>
SVN-Revision: 43669
Felix Fietkau [Fri, 12 Dec 2014 16:23:29 +0000 (16:23 +0000)]
ar8216: enable cpu port to receive arp and broadcast frames for ar8236
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43668
John Crispin [Fri, 12 Dec 2014 16:17:31 +0000 (16:17 +0000)]
ralink: fix lenovo y1 wan port mapping
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43667
John Crispin [Fri, 12 Dec 2014 16:17:24 +0000 (16:17 +0000)]
iwinfo: bump to latest git HEAD
http://patchwork.ozlabs.org/patch/420128/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43666
John Crispin [Fri, 12 Dec 2014 16:17:13 +0000 (16:17 +0000)]
oxnas: build S-ATA driver as a module
From: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43665
John Crispin [Fri, 12 Dec 2014 16:17:03 +0000 (16:17 +0000)]
ralink: make uartf functional on AWM002
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43664
John Crispin [Fri, 12 Dec 2014 16:16:57 +0000 (16:16 +0000)]
oxnas: use u-boot.bin in KDIR
This fixes building *u-boot-initramfs.bin images using ImageBuilder
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43663
John Crispin [Fri, 12 Dec 2014 16:16:45 +0000 (16:16 +0000)]
uboot-oxnas: install u-boot.bin also to KERNEL_BUILD_DIR
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43662
Zoltan Herpai [Fri, 12 Dec 2014 16:11:17 +0000 (16:11 +0000)]
sunxi: fix led on bananapi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43661
Felix Fietkau [Fri, 12 Dec 2014 14:52:29 +0000 (14:52 +0000)]
igmpproxy: do not attempt to ifstatus error messages as json
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43660
Felix Fietkau [Fri, 12 Dec 2014 14:52:24 +0000 (14:52 +0000)]
igmpproxy: do not start instance if no upstream interface is available
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43659
Felix Fietkau [Fri, 12 Dec 2014 14:52:18 +0000 (14:52 +0000)]
igmpproxy: fix init script indentation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43658
Zoltan Herpai [Fri, 12 Dec 2014 13:37:21 +0000 (13:37 +0000)]
mxs: allow bootloader to pass kernel cmdline
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43657
Zoltan Herpai [Fri, 12 Dec 2014 13:18:29 +0000 (13:18 +0000)]
mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43656
Jo-Philipp Wich [Fri, 12 Dec 2014 12:37:51 +0000 (12:37 +0000)]
scripts/config: remove debug statement
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43655
Felix Fietkau [Fri, 12 Dec 2014 12:35:23 +0000 (12:35 +0000)]
scripts/download.pl: add support for adding mirrors through an environment variable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43654
Jo-Philipp Wich [Fri, 12 Dec 2014 12:33:34 +0000 (12:33 +0000)]
busybox: include config files relative to the main Config.in (#18522)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43653
Jo-Philipp Wich [Fri, 12 Dec 2014 12:29:58 +0000 (12:29 +0000)]
scripts/config: support includes relative to the currently processed file
When the initial glob() attempt on a path specified with "source" statement
yields no result, then retry the globbing on the same path with the directory
part of the currently processed file prepended.
This allows us to reference Config.in files relative to their parent instead
of relative to the top dir.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43652
Zoltan Herpai [Fri, 12 Dec 2014 12:14:40 +0000 (12:14 +0000)]
mxs: add i2c and spi packages to profiles
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43651
Zoltan Herpai [Fri, 12 Dec 2014 12:01:39 +0000 (12:01 +0000)]
mxs: fix automatic status led detection
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43650
Zoltan Herpai [Fri, 12 Dec 2014 11:43:56 +0000 (11:43 +0000)]
mxs: update dts file for Duckbill
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43649
Zoltan Herpai [Fri, 12 Dec 2014 11:39:22 +0000 (11:39 +0000)]
mxs: i2c changes - add package for i2c module - remove i2c debug
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43648
Zoltan Herpai [Fri, 12 Dec 2014 11:10:04 +0000 (11:10 +0000)]
mxs: add kernel module for spi interface
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43647
Zoltan Herpai [Fri, 12 Dec 2014 11:03:55 +0000 (11:03 +0000)]
mxs: make boardname consistent with other targets
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43646
Steven Barth [Fri, 12 Dec 2014 09:39:07 +0000 (09:39 +0000)]
netifd: Set source IP for DHCP static routes as well
Commit
ce92f6650bd8a86db04c7a6cbb58e7fdb200a7e6 added source IP support
for DHCP default routes. As a side effect of this change the default route
could be present twice in netifd (once with source IP set and once with
source IP unset) if it was sent by the server in both the router and static
route options. Therefore add source IP support as well for static routes as this
case was not considered. Additional remove unused parameter type.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 43645
Luka Perkov [Thu, 11 Dec 2014 23:29:07 +0000 (23:29 +0000)]
kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43643
Luka Perkov [Thu, 11 Dec 2014 23:29:04 +0000 (23:29 +0000)]
kirkwood: sort 110-nas profile
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43642
John Crispin [Thu, 11 Dec 2014 22:27:56 +0000 (22:27 +0000)]
au1000: revert 43626 due to syntax errors
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43641
John Crispin [Thu, 11 Dec 2014 20:41:51 +0000 (20:41 +0000)]
oxnas: use ARM BCJ filter for XZ decompression
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.
in include/image.mk: BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43640
Rafał Miłecki [Thu, 11 Dec 2014 20:31:07 +0000 (20:31 +0000)]
bcm53xx: failsafe support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43639
Felix Fietkau [Thu, 11 Dec 2014 20:07:58 +0000 (20:07 +0000)]
cfg80211: add support for changing the device mac address via sysfs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43638
Felix Fietkau [Thu, 11 Dec 2014 20:07:52 +0000 (20:07 +0000)]
xburst: fix subtarget config file names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43637
Felix Fietkau [Thu, 11 Dec 2014 20:07:45 +0000 (20:07 +0000)]
x86: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43636
Felix Fietkau [Thu, 11 Dec 2014 20:07:39 +0000 (20:07 +0000)]
octeon: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43635
Felix Fietkau [Thu, 11 Dec 2014 20:07:31 +0000 (20:07 +0000)]
adm8668: remove linux 3.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43634
Jonas Gorski [Thu, 11 Dec 2014 19:35:48 +0000 (19:35 +0000)]
libnl-tiny: fix receiving netlink messages larger than 4K
Apply libnl commit
807fddc4cd9ecb12ba64e1b7fa26d86b6c2f19b0 ("nl:
Increase receive buffer size to 4 pages") also to libnl-tiny to ensure
netlink messages larger than 4KiB can be received, as the restart logic
seems to be broken.
This fixes iwinfo accessing info on dual band b43 cards, as they can
support a lot of channels, breaking the 4K default limit (seen was >5k).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43633
Jonas Gorski [Thu, 11 Dec 2014 19:35:43 +0000 (19:35 +0000)]
ar7: remove config-3.10
Remove a leftover file from the 3.10 support removal.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43632
Jonas Gorski [Thu, 11 Dec 2014 19:35:36 +0000 (19:35 +0000)]
kernel/acx-mac80211: fix autoloading on boot
The kernel build system cannot track dependencies of out-of-tree
modules, making the buildsystem fail to load mac80211.
Add mac80211 as an explicit load to ensure all required modules are
loaded.
Fixes #16522.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43631
John Crispin [Thu, 11 Dec 2014 18:58:12 +0000 (18:58 +0000)]
netlogic: sync kernel config
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43630
John Crispin [Thu, 11 Dec 2014 18:54:30 +0000 (18:54 +0000)]
ralink: mt7621 was missing a symbol that made the CC builder fail
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43629
John Crispin [Thu, 11 Dec 2014 18:39:22 +0000 (18:39 +0000)]
mcp85xx/p1020: fixup config-default
this was missed during the 3.14 bump
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43628
John Crispin [Thu, 11 Dec 2014 18:35:41 +0000 (18:35 +0000)]
kernel/modules: fix chipidea
it should needs to depend on imx and mxs
also remove duplicate kmod definition from mxs target
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43627
John Crispin [Thu, 11 Dec 2014 18:28:44 +0000 (18:28 +0000)]
au1000: distinguish different models and set correct MAC-address
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43626
Felix Fietkau [Thu, 11 Dec 2014 18:18:16 +0000 (18:18 +0000)]
mpc85xx: fix another typo in the image makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43625
Felix Fietkau [Thu, 11 Dec 2014 18:18:10 +0000 (18:18 +0000)]
mpc85xx: add missing devicetree ranges property for ethernet devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43624
Felix Fietkau [Thu, 11 Dec 2014 17:52:22 +0000 (17:52 +0000)]
toolchain: disable libatomic for gcc 4.6
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43623
Felix Fietkau [Thu, 11 Dec 2014 17:52:12 +0000 (17:52 +0000)]
mpc85xx: fix typo in image name
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43622
Felix Fietkau [Thu, 11 Dec 2014 17:03:04 +0000 (17:03 +0000)]
sdk: add missing kernel include files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43621
Felix Fietkau [Thu, 11 Dec 2014 15:29:39 +0000 (15:29 +0000)]
mpc85xx: fix initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43620
Felix Fietkau [Thu, 11 Dec 2014 15:29:33 +0000 (15:29 +0000)]
kernel: allow specifying kernel images to be copied separately from kernel make command line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43619
Felix Fietkau [Thu, 11 Dec 2014 14:38:50 +0000 (14:38 +0000)]
uClibc: fix ptrace header files for powerpc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43617
Rafał Miłecki [Thu, 11 Dec 2014 11:23:26 +0000 (11:23 +0000)]
bcm53xx: support LEDs on Buffalo devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43616
Steven Barth [Thu, 11 Dec 2014 10:30:51 +0000 (10:30 +0000)]
Move telephony feed to github
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43614
Luka Perkov [Thu, 11 Dec 2014 01:20:41 +0000 (01:20 +0000)]
kirkwood: add 3.18 support
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43613
Rafał Miłecki [Wed, 10 Dec 2014 21:50:57 +0000 (21:50 +0000)]
bcm53xx: backport NVRAM driver sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43612
Rafał Miłecki [Wed, 10 Dec 2014 21:24:11 +0000 (21:24 +0000)]
bcm53xx: use bcma callback in SPROM driver to fill the SPROM
This is required because it has to be called at very precise moment. See
comment in driver for details.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43611
Felix Fietkau [Wed, 10 Dec 2014 21:17:14 +0000 (21:17 +0000)]
mt76: update to the latest version, adds a few minor build fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43610
Felix Fietkau [Wed, 10 Dec 2014 21:17:05 +0000 (21:17 +0000)]
mac80211: do not export the backports linux/module.h, it breaks out-of-tree driver builds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43609
Rafał Miłecki [Wed, 10 Dec 2014 19:56:56 +0000 (19:56 +0000)]
bcm53xx: use static NVRAM pointer for now
This will allow us to sync with code sent for upstream.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43608
Luka Perkov [Wed, 10 Dec 2014 18:55:53 +0000 (18:55 +0000)]
kernel: drop CONFIG_PROC_DEVICETREE in 3.18
This option was removed in upstream commit
8357041.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43607
Rafał Miłecki [Wed, 10 Dec 2014 18:29:26 +0000 (18:29 +0000)]
bcm53xx: clean up nvram header
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43606
Luka Perkov [Wed, 10 Dec 2014 18:13:34 +0000 (18:13 +0000)]
kernel: add missing config symbols for 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43605
Rafał Miłecki [Wed, 10 Dec 2014 18:07:01 +0000 (18:07 +0000)]
bcm53xx: move SPROM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43604
Rafał Miłecki [Wed, 10 Dec 2014 18:01:24 +0000 (18:01 +0000)]
bcm53xx: move NVRAM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43603
Rafał Miłecki [Wed, 10 Dec 2014 17:37:24 +0000 (17:37 +0000)]
bcm53xx: move NVRAM header to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43602
Felix Fietkau [Wed, 10 Dec 2014 16:03:02 +0000 (16:03 +0000)]
uclient: update to the latest version, fixes HTTP digest auth processing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43600
Felix Fietkau [Wed, 10 Dec 2014 16:02:49 +0000 (16:02 +0000)]
libnl-tiny: remove dead code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43599
John Crispin [Wed, 10 Dec 2014 15:51:07 +0000 (15:51 +0000)]
oxnas: add support for 2nd S-ATA port to sata_oxnas driver
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.
this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43598
John Crispin [Wed, 10 Dec 2014 15:51:00 +0000 (15:51 +0000)]
oxnas: add copyright header to sata_oxnas
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43597
John Crispin [Wed, 10 Dec 2014 15:50:52 +0000 (15:50 +0000)]
scripts: use extended-remote for greater compatibility
Plain "remote" results in failure to connect using the gdb built with
the toolchain. (On atheros target at least) extended-remote also allows
"run" to restart the target process.
Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 43596
John Crispin [Wed, 10 Dec 2014 15:50:43 +0000 (15:50 +0000)]
umbim: fix build for 64bit targets
the CC builder fails to build umbim for 64bit targets (xlp, malta64, ....)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43595
Luka Perkov [Wed, 10 Dec 2014 14:00:53 +0000 (14:00 +0000)]
kernel/modules: add f2fs support
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43594
Steven Barth [Wed, 10 Dec 2014 10:41:51 +0000 (10:41 +0000)]
odhcp6c: correctly handle renew-replies with short lease times
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43592
Luka Perkov [Tue, 9 Dec 2014 23:29:52 +0000 (23:29 +0000)]
kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43591
Luka Perkov [Tue, 9 Dec 2014 23:29:49 +0000 (23:29 +0000)]
kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43590
Felix Fietkau [Tue, 9 Dec 2014 12:35:18 +0000 (12:35 +0000)]
kernel: add netfilter.mk to modules makefile SCAN_DEPS
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43589
Felix Fietkau [Tue, 9 Dec 2014 12:28:46 +0000 (12:28 +0000)]
ar71xx: improve ethernet driver cache footprint by removing an unnecessary pointer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43588
Felix Fietkau [Tue, 9 Dec 2014 11:01:49 +0000 (11:01 +0000)]
kernel: add a patch to make netfilter conntrack cache routing information
Significantly improves routing / NAT performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43587
Felix Fietkau [Tue, 9 Dec 2014 09:38:33 +0000 (09:38 +0000)]
ar71xx: remove another leftover broken chunk of code in the unaligned access hacks patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43586
Rafał Miłecki [Mon, 8 Dec 2014 18:28:54 +0000 (18:28 +0000)]
bcm53xx: bcm_nand: fix compilation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43584
Steven Barth [Mon, 8 Dec 2014 17:43:14 +0000 (17:43 +0000)]
netifd: several fixes and optimizations
Thanks to Hans Dedecker and Kristian Evensen
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43583
Steven Barth [Mon, 8 Dec 2014 17:43:03 +0000 (17:43 +0000)]
This patch depends on "Pass source address to proto_add_ipv4_route".
I have not found a scenario that would break by setting the source address on
default, but please let me know if any special considerations should be taken.
Signed-off-by: Kristian Evensen <kristian.evensen at gmail.com>
SVN-Revision: 43582
John Crispin [Mon, 8 Dec 2014 17:40:53 +0000 (17:40 +0000)]
opkg: make PKG_UPGRADE available during preinst hook
https://dev.openwrt.org/ticket/18479
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43581
Rafał Miłecki [Mon, 8 Dec 2014 17:39:07 +0000 (17:39 +0000)]
bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43580
Rafał Miłecki [Mon, 8 Dec 2014 17:02:28 +0000 (17:02 +0000)]
brcm47xx: add WNDR3400 V3 buttons
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43579
Jonas Gorski [Mon, 8 Dec 2014 16:11:52 +0000 (16:11 +0000)]
brcm63xx: fix a few issues in irq chip drivers
Fix locking and lock usage, making it compile for SMP.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43578
Jonas Gorski [Mon, 8 Dec 2014 16:11:32 +0000 (16:11 +0000)]
brcm63xx: alphabetically order image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43577
projects / openwrt / staging / neocturne.git / log