Staging: convert hv network driver to hw_features

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: batman-adv: remove rx_csum ethtool_ops

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: remove ethtool_ops->set_sg

Remove set_sg from DSA slave ethtool_ops. Features inheritance looks
broken/not fully implemented anyway.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: Release all routes when processing acks ADD_IP or DEL_IP

When processing an ACK for ADD_IP parameter, we only release
the routes on non-active transports.  This can cause a wrong
source address to be used.  We can release the routes and
cause new route lookups and source address selection so that
new addresses can be used as source.  Additionally, we don't need
to lookup routes for all transports at the same time.  We can let
the transmit code path update the cached route when the transport
actually sends something.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: Allow bindx_del to accept 0 port

We allow 0 port when adding new addresses.  It only
makes sence to allow 0 port when removing addresses.
When removing the currently bound port will be used
when the port in the address is set to 0.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: teach CACC algorithm about removed transports

When we have have to remove a transport due to ASCONF, we move
the data to a new active path.  This can trigger CACC algorithm
to not mark that data as missing when SACKs arrive.  This is
because the transport passed to the CACC algorithm is the one
this data is sitting on, not the one it was sent on (that one
may be gone).  So, by sending the original transport (even if
it's NULL), we may start marking data as missing.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: use memdup_user to copy data from userspace

Use common function to simply code.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: kill abandoned SCTP_CMD_TRANSMIT command

Remove SCTP_CMD_TRANSMIT command as it never be used.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: use common head of addr parameter to access member in addr-unrelated code

The 'p' member of struct sctp_paramhdr is common part for
IPv4 addr parameter and IPv6 addr parameter in union sctp_addr_param.

For addr-related code, use specified addr parameter.
Otherwise, use common header to access type/length member.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix the comment of sctp_sf_violation_paramlen()

Update the comment about sctp_sf_violation_paramlen() to be
more precise.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: delete unused macro definition of sctp_chunk_is_control

The macro never be used.
And if needed, can use !sctp_chunk_is_data instead of.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: add code to display default value of tx rate for VFs

This change will allow the default value of tx rate to be displayed
when ip link show is called on a PF interface.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: pass domain id to be_cmd_link_status_query

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: fix be_mcc_compl_process to identify eth_get_stat command

eth_get_statistics and vlan_config command have same opcode.
Use opcode subsystem id to differentiate one from other.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Add code to display nic speeds other than 1Gbps/10Gbps

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: allow register dump only for PFs

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net:bna: fix compile warning of ‘bfa_ioc_smem_pgoff’ defined but not used

Fix the below compile warning:

drivers/net/bna/bfa_ioc.c:1922: warning: ‘bfa_ioc_smem_pgoff’ defined but not used

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: forcedeth: fix compile warning of not used nv_set_tso function

Fix the below compile warning:
drivers/net/forcedeth.c:4266: warning: ‘nv_set_tso’ defined but not used

commit 569e146 converts forcedeth driver to use hw_features.
So, implement function of .set_tso is abandoned.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-next-2.6

Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:
drivers/net/bnx2x/bnx2x_ethtool.c

net: qlge: convert to hw_features

Another simple conversion.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: vmxnet3: convert to hw_features

This also removes private feature flags that were always set to true.

You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following
cleanup.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: vxge: convert to hw_features

Side effect: ->gro_enable is removed as napi_gro_receive() does the
fallback itself.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: chelsio: convert to hw_features

Also remove flags that were not used or are now redundant to hw_features bits.
No device had UDP_CSUM_CAPABLE set.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: s2io: convert to hw_features

This removes advertising HW_CSUM as driver does not support it.

Note: driver advertises TSO6 but not IPV6_CSUM - bug maybe?

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix section mismatches

Fix build warnings like the following:

WARNING: drivers/net/built-in.o(.data+0x12434): Section mismatch in reference from the variable madgemc_driver to the variable .init.data:madgemc_adapter_ids

And add some consts to EISA device ID tables along the way.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: TSO fixes.

- the MSS value is actually contained in a 11 bits wide (0x7ff) field.
  The extra bit in the former MSSMask did encompass the TSO command
  bit ("LargeSend") as well (0xfff). Oops.

- the Tx descriptor layout is not the same through the whole chipset
  family. The 8169 documentation, the 8168c documentation and Realtek's
  drivers (8.020.00, 1.019.00, 6.014.00) highlight two layouts:
  1. 8169, 8168 up to 8168b (included) and 8101
  2. {8102e, 8168c} and beyond

- notwithstanding the "first descriptor" and "last descriptor" bits, the
  same Tx descriptor content is enforced when a packet consists of several
  descriptors. The chipsets are documented to require it.

Credits go to David Dillow <dave@thedillows.org> for the original patch.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Realtek <nic_swsd@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: myri10ge: convert to hw_features

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Jon Mason <jon.mason@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dm9000: Fix build

Commit c88fcb (net: dm9000: convert to hw_features) broke the build of
the dm9000 driver since it merged functions which use different names
for the board info structure used for I/O operations without updating
all the references to use the same name. Fix that.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding, ipv4, ipv6, vlan: Handle NETDEV_BONDING_FAILOVER like NETDEV_NOTIFY_PEERS

It is undesirable for the bonding driver to be poking into higher
level protocols, and notifiers provide a way to avoid that.  This does
mean removing the ability to configure reptitition of gratuitous ARPs
and unsolicited NAs.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vlan: Propagate NETDEV_NOTIFY_PEERS notifier

The NETDEV_NOTIFY_PEERS notifier indicates that a device moved to a

different physical link; this also applies to any VLAN devices on top
of it.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Send unsolicited neighbour advertismements when notified

The NETDEV_NOTIFY_PEERS notifier is a request to send such
advertisements following migration to a different physical link,
e.g. virtual machine migration.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: cosmetics: Using ethtool_cmd_speed() API

This updates bnx2x to use the ethtool_cmd_speed() family of functions
(see b11f8d8c in 2.6.27-rc3 aka. "ethtool: Expand ethtool_cmd.speed to
32 bits") to get and set the link speed via ethtool. This allows to
avoid manually accessing ethtool_cmd's speed_hi field.

Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_pol_route panic: Do not allow VLAN on loopback

Several tests in the ipv6 routing code check IFF_LOOPBACK, and
allowing stacking such as VLAN'ing on top of loopback results in a
netdevice which reports IFF_LOOPBACK but really isn't the loopback
device.

Instead of spamming the ipv6 routing code with even more special tests,
simply disallow VLAN over loopback.

The result of this patch is:

# modprobe 8021q
# vconfig add lo 43
ERROR: trying to add VLAN #43 to IF -:lo:-  error: Operation not supported

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

decnet: Don't leak entries when rebuilding zone.

As noticed by Ben Hutchings, when we move entries from
one table to another we leak all except the first entry.

Put back the "next" variable removed by commit
9bf9055eb716f85372c41b3fbc51f90bc7653740 ("decnet: Fix set-but-unused
variable.") and use it properly.

Reported-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

via-rhine: Assign random MAC address if necessary

Roger Luethi has had several reports of Rhine NICs providing
an invalid MAC address.  If so, assign a random MAC address so
the hardware can still be used.

Tested as a standalone interface, as carrier for ppp, and as a
bonding slave.

Original-patch-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

via_rhine: Use netdev_<level> and pr_<level>

Use the more current logging styles.

Add #define DEBUG to make netdev_dbg always active.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: fix accidental creation of sysfs directory

Commit bb900b27a2f49b37bc38c08e656ea13048fee13b ("bridge: allow
creating bridge devices with netlink") introduced a bug in net-next
because of a typo in notifier. Every device would have the sysfs
bridge directory (and files).

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cxgb4{,vf}: convert to hw_features

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix port identification problem

This patch fixes port identification on optic devices when there's no link on the port.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/usbnet.c: Use FIELD_SIZEOF macro in usbnet_init() function.

Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ibm_newemac: convert to hw_features

Side effect: allow toggling of TX offloads.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: greth: convert to hw_features

Note: Driver modifies its struct net_device_ops. This will break if used for
multiple devices that are not all the same (if that HW config is possible).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: niu: convert to hw_features

Side effect: allow toggling of TX offloads.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ehea: convert to hw_features

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: benet: convert to hw_features - fixup

Remove be_set_flags() as it's already covered by hw_features.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ajit Khaparde ajit.khaparde@emulex.com
Signed-off-by: David S. Miller <davem@davemloft.net>

net: typhoon: convert to hw_features

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mv643xx: convert to hw_features

Side effect: don't reenable RXCSUM on every ifdown/ifup.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: tehuti: convert to hw_features

As a side effect, make TX offloads changeable.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: add Realtek as maintainer.

Per Hayes's request.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cxgb3: convert to hw_features

This removes some of the remnants of LRO -> GRO conversion.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macvlan: convert to hw_features

Not much of a conversion anyway - macvlan has no way to change the offload
settings independently to its base device.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-merge

be2net: Fix unused-but-set variables.

The variables 'tx_min' and 'tx_max' are set but not used in
be_set_coalesce().

Similarly for 'region' in be_do_flash().

Just kill them off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: i4l: isdn_tty: Fix unused-but-set variables.

The variable 'fcr' is set but not used in isdn_tty_change_speed().

Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ip6table_mangle: Fix set-but-unused variables.

The variable 'flowlabel' is set but unused in ip6t_mangle_out().

The intention here was to compare this key to the header value after
mangling, and trigger a route lookup on mismatch.

Make it so.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ip6_tables: Fix set-but-unused variables.

The variable 'target' is set but unused in compat_copy_entry_from_user().

Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nf_conntrack_standalone: Fix set-but-unused variables.

The variable 'ret' is set but unused in ct_seq_show().

This was obviously meant to be used to propagate error codes
to the caller, so make it so.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nfnetlink_log: Fix set-but-unused variables.

The variable 'tmp_uint' is set but unused in __build_packet_message().

Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

netlabel: Fix set-but-unused variables.

The variable 'type_str' is set but unused in netlbl_cipsov4_add().

Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: Fix set-but-unused variables.

The variable 'ret' is set but unused in l2tp_nl_register_ops().

This was obviously meant to maintain error codes which are
returned to the caller, make it so.

Signed-off-by: David S. Miller <davem@davemloft.net>

irda: irproc: Fix set-but-unused variables.

The variable 'd' is set but unused in irda_proc_register().

Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

irda: irlap_event: Fix set-but-unused variables.

The variable 'ret' is set but unused in irlap_state_sclose().

Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Fix set-but-unused variables.

The variable 'caifdef' is set but unused in modemcmd().

Similarly for 'net' in receive(), and 'res' in
caif_device_notify() and caif_exit_net().

Just kill them off.

Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix set-but-unused variables.

The variable 'rc' is set but unused in bnx2x_timer().

Similarly for 'hc_index_p' in bnx2x_init_sb(), and 'port' in
bnx2x_get_hwinfo().

Just kill them off.

Signed-off-by: David S. Miller <davem@davemloft.net>

bna: Fix set-but-unused variables.

The variable 'pgoff' is set but unused in bfa_nw_ioc_fwver_get()
and bfa_ioc_download_fw().

Similarly for 'cmd_h' in bna_mbox_flush_q and the entirety of
bna_rit_mod_uninit() is unused since variables are purely set but no
action is made using them.

Same for 'bna' in bna_rit_create() and 'ret' in bna_rx_create().

Just kill them off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: mISDN: socket: Fix set-but-unused variables.

The variable 'len' is set but unused in data_sock_getsockopt().

The code should use 'len' to validate that the user's socket option is
indeed the right size.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: i4l: isdn_net: Fix set-but-unused variables.

The variable 'unused' is set but unused in
isdn_net_ciscohdlck_slarp_in().  Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: i4l: isdn_common: Fix set-but-unused variables.

The variable 'ch' is set but unused in isdn_capi_rec_hl_msg().  Just
kill it off.

Similarly for 'chidx' in isdn_ioctl() and 'di' in
isdn_capi_rec_hl_msg().

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: teles_cs: Fix set-but-unused variables.

The variable 'dev' is set but unused in teles_cs_config().  Just
kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: l3ni1: Fix set-but-unused variables.

The variable 'cause' is set but unused in ni1up().  Just
kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: l3dss1: Fix set-but-unused variables.

The variable 'cause' is set but unused in dss1up().  Just
kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: jade: Fix set-but-unused variables.

The variable 'i' is set but unused in JadeVersion().  Just
kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: ipacx: Fix set-but-unused variables.

The variable 'cda2_cr' is set but unused in ctrl_complete().  Just
kill it off.

Keep the cs->readisac() call just in case the register read has side
effects.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: hfc_usb: Fix set-but-unused variables.

The variable 'buf' is set but unused in
ctrl_complete().  Just kill it off.

Similarly for 'err' in hfc_usb_init().

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: elsa_ser: Fix set-but-unused variables.

The variable 'bits' is set but unused in
change_speed().  Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: elsa_cs: Fix set-but-unused variables.

The variable 'dev' is set but unused in
elsa_cs_config().  Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: arcofi: Fix set-but-unused variables.

The variable 'val' is set but unused in
send_arcofi().  Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: hfcsusb: Fix set-but-unused variables.

The variable 'buf' is set but unused in
ctrl_complete().  Just kill it off.

Similarly for the variable 'err' in setup_hfcsusb().

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: hfcpci: Fix set-but-unused variables.

The variable 'total' is set but unused in
hfcpci_empty_bfifo().  Just kill it off.

Similarly for the variable 'val' in ph_state_nt().

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: eicon: Fix set-but-unused variables.

The variable 'best_id' is set but unused in
diva_mnt_add_xdi_adapter().  Just kill it off.

Similarly for the variable 'CIP' in connect_req(), 'Number' in
sig_ind(), 'Info' in dtmf_confirmation() mixer_command()
fax_connect_ack_command() fax_edata_ack_command()
rtp_connect_b3_res_command() and rtp_connect_b3_res_command(), and 'a'
in mixer_indication_coefs_set(),

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: gigaset: Fix set-but-unused variable.

The variable 'offset' is set but unused in
write_iso_tasklet().  Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

batman-adv: Set the txqueuelen to zero when creating soft interface

Like other virtual interfaces, e.g. br0, we don't need a transmit
queue. Packets should only be queued on real interfaces which are
underneath. In practice this patch makes little difference since the
virtual interfaces can accept packets as fast as they come, but the
patch will avoid bufferbloat questions to the mailling lists in the
future.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: protect softif_neigh by rcu

Add get/set wrapper functions for softif_neigh and
use rcu functions to manipulate the pointers.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: concentrate all curr_gw related rcu operations in select/deselect functions

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Protect global TQ window with a spinlock

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Make orig_node->router an rcu protected pointer

The rcu protected macros rcu_dereference() and rcu_assign_pointer()
for the orig_node->router need to be used, as well as spin/rcu locking.
Otherwise we might end up using a router pointer pointing to already
freed memory.

Therefore this commit introduces the safe getter method
orig_node_get_router().

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Simplify gw_check_election(), use gw_get_selected()

gw_get_selected() can get us the desired orig_node directly, therefore
reusing that function in gw_check_election().

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Make gateway_get_selected type safe

Make the return value explicit instead of (void *).

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Move bonding / iface alternating router search to own functions

This decreases the size of find_router() by outsourcing the router
search for the bonding and interface alternating modes to their own sub
functions. This shall make it easier to keep track of the correct
refcounting later.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

atl1c: Fix set-but-unused variable.

The variable 'extra_size' is set but unused in
atl1c_configure_tx().  Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

atl1e: Fix set-but-unused variable.

The variable 'tx_ring' is set but unused in
atl1e_init_ring_resources().  Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

atlx: Fix set-but-unused variable.

The variable 'tpc' is set but unused in atl1_intr_tx().
Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: Fix set-but-unused variable.

The variable 'vlan_dev' is set but unused in
bond_send_gratuitous_arp().  Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

atm: lec: Fix set-but-unused variables.

The variable 'eth' is set but unused in lec_handle_bridge().  Also,
the variable 'priv' is set but unused in lane_module_cleanup().

Just kill them off.

Signed-off-by: David S. Miller <davem@davemloft.net>

ax25: Fix set-but-unused variable.

The variable 's' is set but unused in ax25_protocol_release().
Just kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

econet: Fix set-but-unused variable.

#if 0'd out code for IP handling in aun_data_available() has
been commented out since the beginning, which makes the variable
"ip" set but not used.

Kill it off as well as the stub code.

Signed-off-by: David S. Miller <davem@davemloft.net>

decnet: Fix set-but-unused variable.

"next" in dn_rebuild_zone() is set but not actually used,
kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

pktgen: Fix set-but-unused variable.

"iph" in pktgen_output_ipsec() is set but never actually
used.  Kill it off.

Signed-off-by: David S. Miller <davem@davemloft.net>

atm: solos-pci: Fix set-but-unused variable.

This is just a readback to entire completion of a register
write, keep the readback but kill the unused variable.

Signed-off-by: David S. Miller <davem@davemloft.net>