José Roberto de Souza [Wed, 21 Nov 2018 22:54:40 +0000 (14:54 -0800)]
drm/i915: Keep PSR disabled after a driver reload after a PSR error
If a PSR error happened and the driver is reloaded, the EDP_PSR_IIR
will still keep the error set even after the reset done in the
irq_preinstall and irq_uninstall hooks.
And enabling in this situation cause the screen to freeze in the
first time that PSR HW tries to activate so lets keep PSR disabled
to avoid any rendering problems.
v5: rebased: using edp_psr_shift()
v4: Moved handling from intel_psr_compute_config() to
intel_psr_init() to avoid hardware access during compute(Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
squash
Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-5-jose.souza@intel.com
José Roberto de Souza [Wed, 21 Nov 2018 22:54:39 +0000 (14:54 -0800)]
drm/i915: Disable PSR when a PSR aux error happen
While PSR is active hardware will do aux transactions by it self to
wakeup sink to receive a new frame when necessary. If that
transaction is not acked by sink, hardware will trigger this
interruption.
So let's disable PSR as it is a hint that there is problem with this
sink.
The removed FIXME was asking to manually train the link but we don't
need to do that as by spec sink should do a short pulse when it is
out of sync with source, we just need to make sure it is awaken and
the SDP header with PSR inactive set it will trigger the short pulse
with a error set in the link status.
v3: added workarround to fix scheduled work starvation cause by
to frequent PSR error interruption
v4: only setting irq_aux_error as we don't care in clear it and
not using dev_priv->irq_lock as consequence.
v5: rebased: using edp_psr_shift()
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-4-jose.souza@intel.com
José Roberto de Souza [Wed, 21 Nov 2018 22:54:38 +0000 (14:54 -0800)]
drm/i915: Do not enable PSR in the next modeset after a error
When we detect a error and disable PSR, it is kept disabled until the
next modeset but as the sink already show signs that it do not
properly work with PSR lets disabled it for good to avoid any
additional flickering.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-3-jose.souza@intel.com
José Roberto de Souza [Wed, 21 Nov 2018 22:54:37 +0000 (14:54 -0800)]
drm/i915: Check PSR errors instead of retrain while PSR is enabled
When a PSR error happens sink sets the PSR error register and also
set the link status to a error status.
So in the short pulse handling it was returning earlier and doing a
full detection and attempting to retrain but it fails as PSR HW is
in change of the main-link.
Just call intel_psr_short_pulse() before
intel_dp_needs_link_retrain() is not the right fix as
intel_dp_needs_link_retrain() would return true and trigger a full
detection while PSR HW is still in change of main-link.
Check for PSR active is also not safe as it could be inactive due a
frontbuffer invalidate and still doing the PSR exit sequence.
v3: added comment in intel_dp_needs_link_retrain()
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-2-jose.souza@intel.com
José Roberto de Souza [Wed, 21 Nov 2018 22:54:36 +0000 (14:54 -0800)]
drm/i915: Avoid a full port detection in the first eDP short pulse
Some eDP panels do not set a valid sink count value and even for the
ones that sets is should always be one for eDP, that is why it is not
cached in intel_edp_init_dpcd().
But intel_dp_short_pulse() compares the old count with the read one
if there is a mistmatch a full port detection will be executed, what
was happening in the first short pulse interruption of eDP panels
that sets sink count.
Instead of just skip the compasison for eDP panels, lets not read
the sink count at all for eDP.
v2: the previous version of this patch it was caching the sink count
in intel_edp_init_dpcd() but I was pointed out by Ville a patch that
handled a case of a eDP panel that do not set sink count and as sink
count is not used to eDP certification was choosed to just not read
it at all.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-1-jose.souza@intel.com
Lyude Paul [Wed, 21 Nov 2018 00:37:17 +0000 (19:37 -0500)]
drm/i915: Synchronize hpd work in i915_hpd_storm_ctl_show()
While trying to add a chamelium test for short HPD IRQs, I ran into
issues where a hotplug storm would be triggered, but the point at which
it would be reported by the kernel would be after igt actually finished
checking i915_hpd_storm_ctl's status. So, fix this by simply
synchronizing our IRQ work, dig_port_work, and hotplug_work before
printing out the HPD storm status in i915_hpd_storm_ctl_show().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121003718.17704-1-lyude@redhat.com
Ville Syrjälä [Mon, 29 Oct 2018 18:34:53 +0000 (20:34 +0200)]
drm/i915: Eliminate the horrendous format check code
Replace the messy framebuffer format/modifier validation code
with a single call to drm_any_plane_has_format(). The code was
extremely annoying to maintain as you had to have a lot of platform
checks for different formats. The new code requires zero maintenance.
v2: Nuke the modifier checks as well since the core does that too now
v3: Call drm_any_plane_has_format() from the driver code
v4: Rebase
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029183453.28541-2-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Jani Nikula [Thu, 22 Nov 2018 14:49:47 +0000 (16:49 +0200)]
drm/i915: Update DRIVER_DATE to
20181122
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Jani Nikula [Thu, 22 Nov 2018 14:03:03 +0000 (16:03 +0200)]
drm/i915: Update DRIVER_DATE to
20181122
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Hans Holmberg [Wed, 21 Nov 2018 09:54:23 +0000 (10:54 +0100)]
drm/i915: avoid rebuilding i915_gpu_error.o on version string updates
There is no need to rebuild i915_gpu_error.o when the version string
changes as the version is available in init_utsname()->release.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121095423.20760-1-hans.ml.holmberg@owltronix.com
Chris Wilson [Wed, 21 Nov 2018 15:16:53 +0000 (15:16 +0000)]
drm/i915: Show waiter's status on engine dump
When showing the list of waiters, include the task's status so that we
can tell if they have been woken up and are waiting for the CPU, or if
they are still waiting to be woken.
v2: task_state_to_char()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121151653.24595-1-chris@chris-wilson.co.uk
Ville Syrjälä [Tue, 20 Nov 2018 13:54:50 +0000 (15:54 +0200)]
drm/i915: Add rotation readout for plane initial config
If we need to force a full plane update before userspace/fbdev
have given us a proper plane state we should try to maintain the
current plane state as much as possible (apart from the parts
of the state we're trying to fix up with the plane update).
To that end add basic readout for the plane rotation and
maintain it during the initial fb takeover.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Ville Syrjälä [Tue, 20 Nov 2018 13:54:49 +0000 (15:54 +0200)]
drm/i915: Force a LUT update in intel_initial_commit()
If we force a plane update to fix up our half populated plane state
we'll also force on the pipe gamma for the plane (since we always
enable pipe gamma currently). If the BIOS hasn't programmed a sensible
LUT into the hardware this will cause the image to become corrupted.
Typical symptoms are a purple/yellow/etc. flash when the driver loads.
To avoid this let's program something sensible into the LUT when
we do the plane update. In the future I plan to add proper plane
gamma enable readout so this is just a temporary measure.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Imre Deak [Mon, 19 Nov 2018 18:00:21 +0000 (20:00 +0200)]
drm/i915: Make CHICKEN_TRANS reg not depend on enum value
Depending on the transcoder enum values to translate from transcoder to
the corresponding CHICKEN_TRANS register can easily break if we add a
new transcoder. Add an explicit mapping instead, by using helpers to
look up the register instance either by transcoder or port (since
unconveniently the registers have both port and transcoder specific
bits).
While at it also check for the correctness of GEN, port, transcoder. I
wasn't sure if psr2_enabled can only be set for GEN9+, but that seems to
be the case indeed (see setting of sink_psr2_support in
intel_psr_init_dpcd()).
v2 (Ville):
- Make gen9_chicken_trans_reg() internal to intel_psr.c.
- s/trans/cpu_transcoder/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181119180021.370-1-imre.deak@intel.com
Imre Deak [Tue, 20 Nov 2018 09:23:25 +0000 (11:23 +0200)]
drm/i915: Add code comment on assumption of pipe==transcoder
Add a comment to the pipe and transcoder enum definitions about our
assumption in the code about enum values for pipes and transcoders
with a 1:1 transcoder -> pipe mapping.
v2:
- Clarify more what are the assumptions about the enum values. (Ville)
v3: (Lucas)
- s/->/ -> / so it looks less like pointer dereferencing.
- Use pipe enums as initializers in the transcoder enum definition.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Link: https://patchwork.freedesktop.org/patch/msgid/20181120092325.21249-3-imre.deak@intel.com
Imre Deak [Tue, 20 Nov 2018 09:23:24 +0000 (11:23 +0200)]
drm/i915: Make EDP PSR flags not depend on enum values
Depending on the transcoder enum values to translate from transcoder
to EDP PSR flags can easily break if we add a new transcoder. So remove
the dependency by using an explicit mapping.
While at it also add a WARN for unexpected trancoders.
v2:
- Simplify things by defining flag shift values instead of indices.
- s/trans/cpu_transcoder/ (Ville)
v3:
- Define flags to look like separate bits instead of the values of
the same bitfield. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120092325.21249-2-imre.deak@intel.com
Imre Deak [Tue, 20 Nov 2018 09:23:23 +0000 (11:23 +0200)]
drm/i915: Make pipe/transcoder offsets not depend on enum values
Depending on the transcoder enum values to translate from transcoder
to pipe/transcoder register addresses can easily break if we add a new
transcoder. So remove the dependency by using named initializers.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120092325.21249-1-imre.deak@intel.com
Alexandre Belloni [Tue, 20 Nov 2018 15:14:15 +0000 (16:14 +0100)]
drm/i915: fix spelling mistake "reserverd" -> "reserved"
Fix a spelling mistake in a comment.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120151415.32419-1-alexandre.belloni@bootlin.com
Lucas De Marchi [Sat, 17 Nov 2018 00:42:34 +0000 (16:42 -0800)]
drm/i915: Downgrade unknown CSR firmware warnings
Like it was done in commit
9e180d9991dc ("drm/i915: Downgrade unknown
firmware warnings") for huc and guc: downgrade CSR firmware warnings. If
we have released no firmware yet for a platform, stop scaring the
consumer and merely note its expected absence.
By simply removing the warning and early return we hit the condition
with the appropriate message.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181117004234.23437-2-lucas.demarchi@intel.com
Lucas De Marchi [Sat, 17 Nov 2018 00:42:33 +0000 (16:42 -0800)]
drm/i915: allow to load DMC firmware on next gen
Before commit
d8a5b7d79fb7 ("drm/i915/csr: keep max firmware size together
with firmare name and version") it was possible to load the firmware for
testing purposes via parameter. Let's use the size of the last known
platform to recover that behavior.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181117004234.23437-1-lucas.demarchi@intel.com
José Roberto de Souza [Mon, 19 Nov 2018 23:01:01 +0000 (15:01 -0800)]
drm/i915/ilk: Fix warning when reading emon_status with no output
When there is no output no one will hold a runtime_pm reference
causing a warning when trying to read emom_status in debugfs.
[22.756480] ------------[ cut here ]------------
[22.756489] RPM wakelock ref not held during HW access
[22.756578] WARNING: CPU: 0 PID: 1058 at drivers/gpu/drm/i915/intel_drv.h:2104 gen5_read32+0x16b/0x1a0 [i915]
[22.756580] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core e1000e snd_pcm mei_me prime_numbers mei lpc_ich
[22.756595] CPU: 0 PID: 1058 Comm: debugfs_test Not tainted 4.20.0-rc1-CI-Trybot_3219+ #1
[22.756597] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
[22.756634] RIP: 0010:gen5_read32+0x16b/0x1a0 [i915]
[22.756637] Code: a4 ea e0 0f 0b e9 d2 fe ff ff 80 3d a5 71 19 00 00 0f 85 d3 fe ff ff 48 c7 c7 48 d0 2d a0 c6 05 91 71 19 00 01 e8 35 a4 ea e0 <0f> 0b e9 b9 fe ff ff e8 69 c6 f2 e0 85 c0 75 92 48 c7 c2 78 d0 2d
[22.756639] RSP: 0018:
ffffc90000f1fd38 EFLAGS:
00010282
[22.756642] RAX:
0000000000000000 RBX:
ffff8801f7ab0000 RCX:
0000000000000006
[22.756643] RDX:
0000000000000006 RSI:
ffffffff8212886a RDI:
ffffffff820d6d57
[22.756645] RBP:
0000000000011020 R08:
0000000043e3d1a8 R09:
0000000000000000
[22.756647] R10:
ffffc90000f1fd80 R11:
0000000000000000 R12:
0000000000000001
[22.756649] R13:
ffff8801f7ab0068 R14:
0000000000000001 R15:
ffff88020d53d188
[22.756651] FS:
00007f2878849980(0000) GS:
ffff880213a00000(0000) knlGS:
0000000000000000
[22.756653] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[22.756655] CR2:
00005638deedf028 CR3:
0000000203292001 CR4:
00000000000206f0
[22.756657] Call Trace:
[22.756689] i915_mch_val+0x1b/0x60 [i915]
[22.756721] i915_emon_status+0x45/0xd0 [i915]
[22.756730] seq_read+0xdb/0x3c0
[22.756736] ? lockdep_hardirqs_off+0x94/0xd0
[22.756740] ? __slab_free+0x24e/0x510
[22.756746] full_proxy_read+0x52/0x90
[22.756752] __vfs_read+0x31/0x170
[22.756759] ? do_sys_open+0x13b/0x240
[22.756763] ? rcu_read_lock_sched_held+0x6f/0x80
[22.756766] vfs_read+0x9e/0x140
[22.756770] ksys_read+0x50/0xc0
[22.756775] do_syscall_64+0x55/0x190
[22.756781] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[22.756783] RIP: 0033:0x7f28781dc34e
[22.756786] Code: 00 00 00 00 48 8b 15 71 8c 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff c3 0f 1f 40 00 8b 05 ba d0 20 00 85 c0 75 16 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5a f3 c3 0f 1f 84 00 00 00 00 00 41 54 55 49
[22.756787] RSP: 002b:
00007ffd33fa0d08 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
[22.756790] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f28781dc34e
[22.756792] RDX:
0000000000000200 RSI:
00007ffd33fa0d50 RDI:
0000000000000008
[22.756794] RBP:
00007ffd33fa0f60 R08:
0000000000000000 R09:
0000000000000020
[22.756796] R10:
0000000000000000 R11:
0000000000000246 R12:
00005638de45c2c0
[22.756797] R13:
00007ffd33fa14b0 R14:
0000000000000000 R15:
0000000000000000
[22.756806] irq event stamp: 47950
[22.756811] hardirqs last enabled at (47949): [<
ffffffff810fba74>] vprintk_emit+0x124/0x320
[22.756813] hardirqs last disabled at (47950): [<
ffffffff810019b0>] trace_hardirqs_off_thunk+0x1a/0x1c
[22.756816] softirqs last enabled at (47518): [<
ffffffff81c0033a>] __do_softirq+0x33a/0x4b9
[22.756820] softirqs last disabled at (47479): [<
ffffffff8108df29>] irq_exit+0xa9/0xc0
[22.756858] WARNING: CPU: 0 PID: 1058 at drivers/gpu/drm/i915/intel_drv.h:2104 gen5_read32+0x16b/0x1a0 [i915]
[22.756860] ---[ end trace
bf56fa7d6a3cbf7a ]
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181119230101.32460-1-jose.souza@intel.com
Chris Wilson [Tue, 20 Nov 2018 12:06:01 +0000 (12:06 +0000)]
drm/i915/selftests: Hold task reference to reset worker
As the worker may exit by itself, we need to hold a task reference to it
in the parent.
References: https://bugs.freedesktop.org/show_bug.cgi?id=108735
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120120601.24083-1-chris@chris-wilson.co.uk
Jani Nikula [Tue, 20 Nov 2018 11:14:08 +0000 (13:14 +0200)]
Merge drm/drm-next into drm-intel-next-queued
Pull in v4.20-rc3 via drm-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Jani Nikula [Fri, 16 Nov 2018 12:07:29 +0000 (14:07 +0200)]
drm/i915/fixed: cosmetic cleanup
Clean up fixed point temp variable initialization, use the more
conventional tmp name for temp variables, add empty lines before
return. No functional changes.
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116120729.7580-5-jani.nikula@intel.com
Jani Nikula [Fri, 16 Nov 2018 12:07:28 +0000 (14:07 +0200)]
drm/i915/fixed: simplify is_fixed16_zero()
Simply return the condition. No functional changes.
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116120729.7580-4-jani.nikula@intel.com
Jani Nikula [Fri, 16 Nov 2018 12:07:27 +0000 (14:07 +0200)]
drm/i915/fixed: simplify FP_16_16_MAX definition
No need to use a compound statement enclosed in parenthesis where a C99
compound literal will do. No functional changes.
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116120729.7580-3-jani.nikula@intel.com
Jani Nikula [Fri, 16 Nov 2018 12:07:26 +0000 (14:07 +0200)]
drm/i915/fixed: prefer kernel types over stdint types
While at it, conform to kernel spacing (i.e. no space) after cast. No
functional changes.
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116120729.7580-2-jani.nikula@intel.com
Jani Nikula [Fri, 16 Nov 2018 12:07:25 +0000 (14:07 +0200)]
drm/i915: extract fixed point math to i915_fixed.h
Reduce bloat in one of the bigger header files. Fix some indentation
while at it. No functional changes.
v2: Add include guards (Joonas)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116120729.7580-1-jani.nikula@intel.com
Chris Wilson [Mon, 19 Nov 2018 15:41:53 +0000 (15:41 +0000)]
drm/i915: Write GPU relocs harder with gen3
Under moderate amounts of GPU stress, we can observe on Bearlake and
Pineview (later gen3 models) that we execute the following batch buffer
before the write into the batch is coherent. Adding extra (tested with
upto 32x) MI_FLUSH to either the invalidation, flush or both phases does
not solve the incoherency issue with the relocations, but emitting the
MI_STORE_DWORD_IMM twice does. So be it.
Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 2 Nov 2018 16:12:12 +0000 (16:12 +0000)]
drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture
Since capturing the error state requires fiddling around with the GGTT
to read arbitrary buffers and is itself run under stop_machine(), it
deadlocks the machine (effectively a hard hang) when run in conjunction
with Broxton's VTd workaround to serialize GGTT access.
v2: Store the ERR_PTR in first_error so that the error can be reported
to the user via sysfs.
v3: Mention the quirk in dmesg (using info as per usual)
Fixes: 0ef34ad6222a ("drm/i915: Serialize GTT/Aperture accesses on BXT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: John Harrison <john.C.Harrison@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-5-chris@chris-wilson.co.uk
Joonas Lahtinen [Fri, 16 Nov 2018 14:44:47 +0000 (16:44 +0200)]
drm/i915: Hide enable_gvt modparam when not compiled in
Hide the enable_gvt modparam in the default scenario where
support has not been compiled in.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116144447.7836-1-joonas.lahtinen@linux.intel.com
Joonas Lahtinen [Fri, 16 Nov 2018 13:55:10 +0000 (15:55 +0200)]
Revert "drm/i915/perf: Fix warning in documentation"
Userspace portion is still missing.
This reverts commit
9fa6e2f7609fdbb7d6f86be86371a5719bec0376.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116135510.13807-2-joonas.lahtinen@linux.intel.com
Joonas Lahtinen [Fri, 16 Nov 2018 13:55:09 +0000 (15:55 +0200)]
Revert "drm/i915/perf: add a parameter to control the size of OA buffer"
Userspace portion is still missing.
This reverts commit
cd956bfcd0f58d20485ac0a785415f7d9327a95f.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116135510.13807-1-joonas.lahtinen@linux.intel.com
Dave Airlie [Mon, 19 Nov 2018 01:07:52 +0000 (11:07 +1000)]
Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux into drm-next
New features for 4.21:
amdgpu:
- Support for SDMA paging queue on vega
- Put compute EOP buffers into vram for better performance
- Share more code with amdkfd
- Support for scanout with DCC on gfx9
- Initial kerneldoc for DC
- Updated SMU firmware support for gfx8 chips
- Rework CSA handling for eventual support for preemption
- XGMI PSP support
- Clean up RLC handling
- Enable GPU reset by default on VI, SOC15 dGPUs
- Ring and IB test cleanups
amdkfd:
- Share more code with amdgpu
ttm:
- Move global init out of the drivers
scheduler:
- Track if schedulers are ready for work
- Timeout/fault handling changes to facilitate GPU recovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
Dave Airlie [Mon, 19 Nov 2018 00:40:00 +0000 (10:40 +1000)]
Merge tag 'drm-misc-next-2018-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.21, part 1:
UAPI Changes:
- Add syncobj timeline support to drm.
Cross-subsystem Changes:
- Remove shared fence staging in dma-buf's fence object, and allow
reserving more than 1 fence and add more paranoia when debugging.
- Constify infoframe functions in video/hdmi.
Core Changes:
- Add vkms todo, and a lot of assorted doc fixes.
- Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown().
- Move atomic state helper functions to drm_atomic_state_helper.[ch]
- Refactor drm selftests, and add new tests.
- DP MST atomic state cleanups.
- Drop EXPORT_SYMBOL from drm leases.
- Lease cleanups and fixes.
- Create render node for vgem.
Driver Changes:
- Fix build failure in imx without fbdev emulation.
- Add rotation quirk for GPD win2 panel.
- Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG,
Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
Himax HX8357D, simulated RTSM AEMv8.
- Add dw_hdmi support to rockchip driver.
- Fix YUV support in vc4.
- Fix resource id handling in virtio.
- Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support.
- Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR.
- Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup().
- Add Mali linear tiled formats, and enable them in the Mali-DP driver.
- Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP.
- Assorted driver cleanups and fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
Linus Torvalds [Sun, 18 Nov 2018 21:33:44 +0000 (13:33 -0800)]
Linux 4.20-rc3
Linus Torvalds [Sun, 18 Nov 2018 20:21:09 +0000 (12:21 -0800)]
Merge tag 'libnvdimm-fixes-4.20-rc3' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A small batch of fixes for v4.20-rc3.
The overflow continuation fix addresses something that has been broken
for several releases. Arguably it could wait even longer, but it's a
one line fix and this finishes the last of the known address range
scrub bug reports. The revert addresses a lockdep regression. The unit
tests are not critical to fix, but no reason to hold this fix back.
Summary:
- Address Range Scrub overflow continuation handling has been broken
since it was initially merged. It was only recently that error
injection and platform-BIOS support enabled this corner case to be
exercised.
- The recent attempt to provide more isolation for the kernel Address
Range Scrub state machine from userapace initiated sessions
triggers a lockdep report. Revert and try again at the next merge
window.
- Fix a kasan reported buffer overflow in libnvdimm unit test
infrastrucutre (nfit_test)"
* tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
Revert "acpi, nfit: Further restrict userspace ARS start requests"
acpi, nfit: Fix ARS overflow continuation
tools/testing/nvdimm: Fix the array size for dimm devices.
Linus Torvalds [Sun, 18 Nov 2018 19:31:26 +0000 (11:31 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
mm, page_alloc: check for max order in hot path
scripts/spdxcheck.py: make python3 compliant
tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
mm/vmstat.c: fix NUMA statistics updates
mm/gup.c: fix follow_page_mask() kerneldoc comment
ocfs2: free up write context when direct IO failed
scripts/faddr2line: fix location of start_kernel in comment
mm: don't reclaim inodes with many attached pages
mm, memory_hotplug: check zone_movable in has_unmovable_pages
mm/swapfile.c: use kvzalloc for swap_info_struct allocation
MAINTAINERS: update OMAP MMC entry
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
kernel/sched/psi.c: simplify cgroup_move_task()
z3fold: fix possible reclaim races
Linus Torvalds [Sun, 18 Nov 2018 18:58:20 +0000 (10:58 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix an exec() related scalability/performance regression, which was
caused by incorrectly calculating load and migrating tasks on exec()
when they shouldn't be"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix cpu_util_wake() for 'execl' type workloads
Linus Torvalds [Sun, 18 Nov 2018 18:54:59 +0000 (10:54 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Fix uncore PMU enumeration for CofeeLake CPUs"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Support CoffeeLake 8th CBOX
perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs
Linus Torvalds [Sun, 18 Nov 2018 18:52:26 +0000 (10:52 -0800)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc fixes: two warning splat fixes, a leak fix and persistent memory
allocation fixes for ARM"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Permit calling efi_mem_reserve_persistent() from atomic context
efi/arm: Defer persistent reservations until after paging_init()
efi/arm/libstub: Pack FDT after populating it
efi/arm: Revert deferred unmap of early memmap mapping
efi: Fix debugobjects warning on 'efi_rts_work'
Linus Torvalds [Sun, 18 Nov 2018 18:45:09 +0000 (10:45 -0800)]
Merge branch 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM spectre updates from Russell King:
"These are the currently known final bits that resolve the Spectre
issues. big.Little systems used to be sufficiently identical in that
there were no differences between individual CPUs in the system that
mattered to the kernel. With the advent of the Spectre problem, the
CPUs now have differences in how the workaround is applied.
As a result of previous Spectre patches, these systems ended up
reporting quite a lot of:
"CPUx: Spectre v2: incorrect context switching function, system vulnerable"
messages due to the action of the big.Little switcher causing the CPUs
to be re-initialised regularly. This series resolves that issue by
making the CPU vtable unique to each CPU.
However, since this is used very early, before per-cpu is setup,
per-cpu can't be used. We also have a problem that two of the methods
are not called from preempt-safe paths, but thankfully these remain
identical between all CPUs in the system. To make sure, we validate
that these are identical during boot"
* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: spectre-v2: per-CPU vtables to work around big.Little systems
ARM: add PROC_VTABLE and PROC_TABLE macros
ARM: clean up per-processor check_bugs method call
ARM: split out processor lookup
ARM: make lookup_processor_type() non-__init
Chen Chang [Fri, 16 Nov 2018 23:08:57 +0000 (15:08 -0800)]
mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.com
Signed-off-by: Chen Chang <rainccrun@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 16 Nov 2018 23:08:53 +0000 (15:08 -0800)]
mm, page_alloc: check for max order in hot path
Konstantin has noticed that kvmalloc might trigger the following
warning:
WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60
[...]
Call Trace:
fragmentation_index+0x76/0x90
compaction_suitable+0x4f/0xf0
shrink_node+0x295/0x310
node_reclaim+0x205/0x250
get_page_from_freelist+0x649/0xad0
__alloc_pages_nodemask+0x12a/0x2a0
kmalloc_large_node+0x47/0x90
__kmalloc_node+0x22b/0x2e0
kvmalloc_node+0x3e/0x70
xt_alloc_table_info+0x3a/0x80 [x_tables]
do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables]
nf_setsockopt+0x44/0x60
SyS_setsockopt+0x6f/0xc0
do_syscall_64+0x67/0x120
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
the problem is that we only check for an out of bound order in the slow
path and the node reclaim might happen from the fast path already. This
is fixable by making sure that kvmalloc doesn't ever use kmalloc for
requests that are larger than KMALLOC_MAX_SIZE but this also shows that
the code is rather fragile. A recent UBSAN report just underlines that
by the following report
UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19
shift exponent 51 is too large for 32-bit type 'int'
CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xd2/0x148 lib/dump_stack.c:113
ubsan_epilogue+0x12/0x94 lib/ubsan.c:159
__ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425
__zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117
zone_watermark_fast mm/page_alloc.c:3216 [inline]
get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300
__alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370
alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093
alloc_pages include/linux/gfp.h:509 [inline]
__get_free_pages+0x12/0x60 mm/page_alloc.c:4414
dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156
raw_cmd_copyin drivers/block/floppy.c:3159 [inline]
raw_cmd_ioctl drivers/block/floppy.c:3206 [inline]
fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544
fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571
__blkdev_driver_ioctl block/ioctl.c:303 [inline]
blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601
block_ioctl+0x105/0x150 fs/block_dev.c:1883
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687
ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702
__do_sys_ioctl fs/ioctl.c:709 [inline]
__se_sys_ioctl fs/ioctl.c:707 [inline]
__x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707
do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Note that this is not a kvmalloc path. It is just that the fast path
really depends on having sanitzed order as well. Therefore move the
order check to the fast path.
Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Byoungyoung Lee <lifeasageek@gmail.com>
Cc: "Dae R. Jeong" <threeearcat@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 16 Nov 2018 23:08:43 +0000 (15:08 -0800)]
scripts/spdxcheck.py: make python3 compliant
Without this change the following happens when using Python3 (3.6.6):
$ echo "GPL-2.0" | python3 scripts/spdxcheck.py -
FAIL: 'str' object has no attribute 'decode'
Traceback (most recent call last):
File "scripts/spdxcheck.py", line 253, in <module>
parser.parse_lines(sys.stdin, args.maxlines, '-')
File "scripts/spdxcheck.py", line 171, in parse_lines
line = line.decode(locale.getpreferredencoding(False), errors='ignore')
AttributeError: 'str' object has no attribute 'decode'
So as the line is already a string, there is no need to decode it and
the line can be dropped.
/usr/bin/python on Arch is Python 3. So this would indeed be worth
going into 4.19.
Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yufen Yu [Fri, 16 Nov 2018 23:08:39 +0000 (15:08 -0800)]
tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
Other filesystems such as ext4, f2fs and ubifs all return ENXIO when
lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset.
man 2 lseek says
: EINVAL whence is not valid. Or: the resulting file offset would be
: negative, or beyond the end of a seekable device.
:
: ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond
: the end of the file.
Make tmpfs return ENXIO under these circumstances as well. After this,
tmpfs also passes xfstests's generic/448.
[akpm@linux-foundation.org: rewrite changelog]
Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 16 Nov 2018 23:08:35 +0000 (15:08 -0800)]
lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
gcc-8 complains about the prototype for this function:
lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes]
This is actually a GCC's bug. In GCC internals
__ubsan_handle_builtin_unreachable() declared with both 'noreturn' and
'const' attributes instead of only 'noreturn':
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210
Workaround this by removing the noreturn attribute.
[aryabinin: add information about GCC bug in changelog]
Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Janne Huttunen [Fri, 16 Nov 2018 23:08:32 +0000 (15:08 -0800)]
mm/vmstat.c: fix NUMA statistics updates
Scan through the whole array to see if an update is needed. While we're
at it, use sizeof() to be safe against any possible type changes in the
future.
The bug here is that we wouldn't sync per-cpu counters into global ones
if there was an update of numa_stats for higher cpus. Highly
theoretical one though because it is much more probable that zone_stats
are updated so we would refresh anyway. So I wouldn't bother to mark
this for stable, yet something nice to fix.
[mhocko@suse.com: changelog enhancement]
Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com
Fixes: 1d90ca897cb0 ("mm: update NUMA counter threshold size")
Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Fri, 16 Nov 2018 23:08:29 +0000 (15:08 -0800)]
mm/gup.c: fix follow_page_mask() kerneldoc comment
Commit
df06b37ffe5a ("mm/gup: cache dev_pagemap while pinning pages")
modified the signature of follow_page_mask() but left the parameter
description behind.
Update the description to make the code and comments agree again.
While at it, update formatting of the return value description to match
Documentation/doc-guide/kernel-doc.rst guidelines.
Link: http://lkml.kernel.org/r/1541603316-27832-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wengang Wang [Fri, 16 Nov 2018 23:08:25 +0000 (15:08 -0800)]
ocfs2: free up write context when direct IO failed
The write context should also be freed even when direct IO failed.
Otherwise a memory leak is introduced and entries remain in
oi->ip_unwritten_list causing the following BUG later in unlink path:
ERROR: bug expression: !list_empty(&oi->ip_unwritten_list)
ERROR: Clear inode of 215043, inode has unwritten extents
...
Call Trace:
? __set_current_blocked+0x42/0x68
ocfs2_evict_inode+0x91/0x6a0 [ocfs2]
? bit_waitqueue+0x40/0x33
evict+0xdb/0x1af
iput+0x1a2/0x1f7
do_unlinkat+0x194/0x28f
SyS_unlinkat+0x1b/0x2f
do_syscall_64+0x79/0x1ae
entry_SYSCALL_64_after_hwframe+0x151/0x0
This patch also logs, with frequency limit, direct IO failures.
Link: http://lkml.kernel.org/r/20181102170632.25921-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 16 Nov 2018 23:08:22 +0000 (15:08 -0800)]
scripts/faddr2line: fix location of start_kernel in comment
Fix a source file reference location to the correct path name.
Link: http://lkml.kernel.org/r/1d50bd3d-178e-dcd8-779f-9711887440eb@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Fri, 16 Nov 2018 23:08:18 +0000 (15:08 -0800)]
mm: don't reclaim inodes with many attached pages
Spock reported that commit
172b06c32b94 ("mm: slowly shrink slabs with a
relatively small number of objects") leads to a regression on his setup:
periodically the majority of the pagecache is evicted without an obvious
reason, while before the change the amount of free memory was balancing
around the watermark.
The reason behind is that the mentioned above change created some
minimal background pressure on the inode cache. The problem is that if
an inode is considered to be reclaimed, all belonging pagecache page are
stripped, no matter how many of them are there. So, if a huge
multi-gigabyte file is cached in the memory, and the goal is to reclaim
only few slab objects (unused inodes), we still can eventually evict all
gigabytes of the pagecache at once.
The workload described by Spock has few large non-mapped files in the
pagecache, so it's especially noticeable.
To solve the problem let's postpone the reclaim of inodes, which have
more than 1 attached page. Let's wait until the pagecache pages will be
evicted naturally by scanning the corresponding LRU lists, and only then
reclaim the inode structure.
Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Spock <dairinin@gmail.com>
Tested-by: Spock <dairinin@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [4.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 16 Nov 2018 23:08:15 +0000 (15:08 -0800)]
mm, memory_hotplug: check zone_movable in has_unmovable_pages
Page state checks are racy. Under a heavy memory workload (e.g. stress
-m 200 -t 2h) it is quite easy to hit a race window when the page is
allocated but its state is not fully populated yet. A debugging patch to
dump the struct page state shows
has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0
page:
ffffea0437fb0000 count:1 mapcount:1 mapping:
ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1
flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked)
Note that the state has been checked for both PageLRU and PageSwapBacked
already. Closing this race completely would require some sort of retry
logic. This can be tricky and error prone (think of potential endless
or long taking loops).
Workaround this problem for movable zones at least. Such a zone should
only contain movable pages. Commit
15c30bc09085 ("mm, memory_hotplug:
make has_unmovable_pages more robust") has told us that this is not
strictly true though. Bootmem pages should be marked reserved though so
we can move the original check after the PageReserved check. Pages from
other zones are still prone to races but we even do not pretend that
memory hotremove works for those so pre-mature failure doesn't hurt that
much.
Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org
Fixes: 15c30bc09085 ("mm, memory_hotplug: make has_unmovable_pages more robust")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Baoquan He <bhe@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Fri, 16 Nov 2018 23:08:11 +0000 (15:08 -0800)]
mm/swapfile.c: use kvzalloc for swap_info_struct allocation
Commit
a2468cc9bfdf ("swap: choose swap device according to numa node")
changed 'avail_lists' field of 'struct swap_info_struct' to an array.
In popular linux distros it increased size of swap_info_struct up to 40
Kbytes and now swap_info_struct allocation requires order-4 page.
Switch to kvzmalloc allows to avoid unexpected allocation failures.
Link: http://lkml.kernel.org/r/fc23172d-3c75-21e2-d551-8b1808cbe593@virtuozzo.com
Fixes: a2468cc9bfdf ("swap: choose swap device according to numa node")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aaro Koskinen [Fri, 16 Nov 2018 23:08:08 +0000 (15:08 -0800)]
MAINTAINERS: update OMAP MMC entry
Jarkko's e-mail address hasn't worked for a long time. We still want to
keep this driver working as it is critical for some of the OMAP boards.
I use and test this driver frequently, so change myself as a maintainer
with "Odd Fixes" status.
Link: http://lkml.kernel.org/r/20181106222750.12939-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Fri, 16 Nov 2018 23:08:04 +0000 (15:08 -0800)]
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Fri, 16 Nov 2018 23:08:00 +0000 (15:08 -0800)]
kernel/sched/psi.c: simplify cgroup_move_task()
The existing code triggered an invalid warning about 'rq' possibly being
used uninitialized. Instead of doing the silly warning suppression by
initializa it to NULL, refactor the code to bail out early instead.
Warning was:
kernel/sched/psi.c: In function `cgroup_move_task':
kernel/sched/psi.c:639:13: warning: `rq' may be used uninitialized in this function [-Wmaybe-uninitialized]
Link: http://lkml.kernel.org/r/20181103183339.8669-1-olof@lixom.net
Fixes: 2ce7135adc9ad ("psi: cgroup support")
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vitaly Wool [Fri, 16 Nov 2018 23:07:56 +0000 (15:07 -0800)]
z3fold: fix possible reclaim races
Reclaim and free can race on an object which is basically fine but in
order for reclaim to be able to map "freed" object we need to encode
object length in the handle. handle_to_chunks() is then introduced to
extract object length from a handle and use it during mapping.
Moreover, to avoid racing on a z3fold "headless" page release, we should
not try to free that page in z3fold_free() if the reclaim bit is set.
Also, in the unlikely case of trying to reclaim a page being freed, we
should not proceed with that page.
While at it, fix the page accounting in reclaim function.
This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups".
Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Signed-off-by: Jongseok Kim <ks77sj@gmail.com>
Reported-by-by: Jongseok Kim <ks77sj@gmail.com>
Reviewed-by: Snild Dolkow <snild@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 16 Nov 2018 19:18:36 +0000 (13:18 -0600)]
Merge tag 'fsnotify_for_v4.20-rc3' of git://git./linux/kernel/git/jack/linux-fs
Pull fsnotify fix from Jan Kara:
"One small fsnotify fix for duplicate events"
* tag 'fsnotify_for_v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: fix handling of events on child sub-directory
Linus Torvalds [Fri, 16 Nov 2018 17:38:14 +0000 (11:38 -0600)]
Merge tag 'gfs2-4.20.fixes3' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull bfs2 fixes from Andreas Gruenbacher:
"Fix two bugs leading to leaked buffer head references:
- gfs2: Put bitmap buffers in put_super
- gfs2: Fix iomap buffer head reference counting bug
And one bug leading to significant slow-downs when deleting large
files:
- gfs2: Fix metadata read-ahead during truncate (2)"
* tag 'gfs2-4.20.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix iomap buffer head reference counting bug
gfs2: Fix metadata read-ahead during truncate (2)
gfs2: Put bitmap buffers in put_super
Andreas Gruenbacher [Sun, 11 Nov 2018 11:15:21 +0000 (11:15 +0000)]
gfs2: Fix iomap buffer head reference counting bug
GFS2 passes the inode buffer head (dibh) from gfs2_iomap_begin to
gfs2_iomap_end in iomap->private. It sets that private pointer in
gfs2_iomap_get. Users of gfs2_iomap_get other than gfs2_iomap_begin
would have to release iomap->private, but this isn't done correctly,
leading to a leak of buffer head references.
To fix this, move the code for setting iomap->private from
gfs2_iomap_get to gfs2_iomap_begin.
Fixes: 64bc06bb32 ("gfs2: iomap buffered write support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 16 Nov 2018 16:37:27 +0000 (10:37 -0600)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Potential memory overwrite in simd
- Kernel info leaks in crypto_user
- NULL dereference and use-after-free in hisilicon"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: user - Zeroize whole structure given to user space
crypto: user - fix leaking uninitialized memory to userspace
crypto: simd - correctly take reqsize of wrapped skcipher into account
crypto: hisilicon - Fix reference after free of memories on error path
crypto: hisilicon - Fix NULL dereference for same dst and src
Linus Torvalds [Fri, 16 Nov 2018 16:17:29 +0000 (10:17 -0600)]
Merge tag 'drm-fixes-2018-11-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Live from Vancouver, SoC maintainer talk, this weeks drm fixes pull
for rc3:
omapdrm:
- regression fixes for the reordering bridge stuff that went into rc1
i915:
- incorrect EU count fix
- HPD storm fix
- MST fix
- relocation fix for gen4/5
amdgpu:
- huge page handling fix
- IH ring setup
- XGMI aperture setup
- watermark setup fix
misc:
- docs and MST fix"
* tag 'drm-fixes-2018-11-16' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/i915: Account for scale factor when calculating initial phase
drm/i915: Clean up skl_program_scaler()
drm/i915: Move programming plane scaler to its own function.
drm/i915/icl: Drop spurious register read from icl_dbuf_slices_update
drm/i915: fix broadwell EU computation
drm/amdgpu: fix huge page handling on Vega10
drm/amd/pp: Fix truncated clock value when set watermark
drm/amdgpu: fix bug with IH ring setup
drm/meson: venc: dmt mode must use encp
drm/amdgpu: set system aperture to cover whole FB region
drm/i915: Fix hpd handling for pins with two encoders
drm/i915/execlists: Force write serialisation into context image vs execution
drm/i915/icl: Fix power well 2 wrt. DC-off toggling order
drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST
drm/i915: Fix possible race in intel_dp_add_mst_connector()
drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5
drm/omap: dsi: Fix missing of_platform_depopulate()
drm/omap: Move DISPC runtime PM handling to omapdrm
drm/omap: dsi: Ensure the device is active during probe
drm/omap: hdmi4: Ensure the device is active during bind
...
Linus Torvalds [Fri, 16 Nov 2018 16:14:54 +0000 (10:14 -0600)]
Merge tag 'powerpc-4.20-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two weeks worth of fixes since rc1.
- I broke 16-byte alignment of the stack when we moved PPR into
pt_regs. Despite being required by the ABI this broke almost
nothing, we eventually hit it in code where GCC does arithmetic on
the stack pointer assuming the bottom 4 bits are clear. Fix it by
padding the in-kernel pt_regs by 8 bytes.
- A couple of commits fixing minor bugs in the recent SLB rewrite.
- A build fix related to tracepoints in KVM in some configurations.
- Our old "IO workarounds" code written for Cell couldn't coexist in
a kernel that runs on Power9 with the Radix MMU, fix that.
- Remove the NPU DMA ops, these just printed a warning and should
never have been called.
- Suppress an overly chatty message triggered by CPU hotplug in some
configs.
- Two small selftest fixes.
Thanks to: Alistair Popple, Gustavo Romero, Nicholas Piggin, Satheesh
Rajendran, Scott Wood"
* tag 'powerpc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Adjust wild_bctr to build with old binutils
powerpc/64: Fix kernel stack 16-byte alignment
powerpc/numa: Suppress "VPHN is not supported" messages
selftests/powerpc: Fix wild_bctr test to work on ppc64
powerpc/io: Fix the IO workarounds code to work with Radix
powerpc/mm/64s: Fix preempt warning in slb_allocate_kernel()
KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE
powerpc/mm/64s: Only use slbfee on CPUs that support it
powerpc/mm/64s: Use PPC_SLBFEE macro
powerpc/mm/64s: Consolidate SLB assertions
powerpc/powernv/npu: Remove NPU DMA ops
Linus Torvalds [Fri, 16 Nov 2018 16:10:27 +0000 (10:10 -0600)]
Merge tag 'xtensa-
20181115' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix stack alignment for bFLT binaries.
- fix physical-to-virtual address translation for boot parameters in
MMUv3 256+256 and 512+512 virtual memory layouts.
* tag 'xtensa-
20181115' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix boot parameters address translation
xtensa: make sure bFLT stack is 16 byte aligned
Chris Wilson [Tue, 9 Oct 2018 11:12:59 +0000 (12:12 +0100)]
drm/i915: Downgrade unknown firmware warnings
If we have released no firmware yet for a platform, stop scaring the
consumer and merely note its expected absence.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009111259.20807-1-chris@chris-wilson.co.uk
Linus Torvalds [Fri, 16 Nov 2018 15:31:59 +0000 (09:31 -0600)]
Merge tag 'for-linus-
20181115' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Discard loop fix, caused by integer overflow (Dave)
- Blacklist of Samsung drive that hangs with power management (Diego)
- Copy bio priority when cloning it (Hannes)
- Fix race condition exposed in floppy (me)
- Fix SCSI queue cleanup regression. While elusive, it caused oopses in
queue running (Ming)
- Fix bad string copy in kyber tracing (Omar)
* tag 'for-linus-
20181115' of git://git.kernel.dk/linux-block:
SCSI: fix queue cleanup race before queue initialization is done
block: fix 32 bit overflow in __blkdev_issue_discard()
libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD
block: copy ioprio in __bio_clone_fast() and bounce
kyber: fix wrong strlcpy() size in trace_kyber_latency()
floppy: fix race condition in __floppy_read_block_0()
Linus Torvalds [Fri, 16 Nov 2018 15:30:13 +0000 (09:30 -0600)]
Merge tag 'fuse-fixes-4.20-rc3' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"A couple of fixes, all bound for -stable (i.e. not regressions in this
cycle)"
* tag 'fuse-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix use-after-free in fuse_direct_IO()
fuse: fix possibly missed wake-up after abort
fuse: fix leaked notify reply
Ville Syrjälä [Wed, 14 Nov 2018 17:34:40 +0000 (19:34 +0200)]
drm/i915: Disable LP3 watermarks on all SNB machines
I have a Thinkpad X220 Tablet in my hands that is losing vblank
interrupts whenever LP3 watermarks are used.
If I nudge the latency value written to the WM3 register just
by one in either direction the problem disappears. That to me
suggests that the punit will not enter the corrsponding
powersave mode (MPLL shutdown IIRC) unless the latency value
in the register matches exactly what we read from SSKPD. Ie.
it's not really a latency value but rather just a cookie
by which the punit can identify the desired power saving state.
On HSW/BDW this was changed such that we actually just write
the WM level number into those bits, which makes much more
sense given the observed behaviour.
We could try to handle this by disallowing LP3 watermarks
only when vblank interrupts are enabled but we'd first have
to prove that only vblank interrupts are affected, which
seems unlikely. Also we can't grab the wm mutex from the
vblank enable/disable hooks because those are called with
various spinlocks held. Thus we'd have to redesigne the
watermark locking. So to play it safe and keep the code
simple we simply disable LP3 watermarks on all SNB machines.
To do that we simply zero out the latency values for
watermark level 3, and we adjust the watermark computation
to check for that. The behaviour now matches that of the
g4x/vlv/skl wm code in the presence of a zeroed latency
value.
v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris)
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
Chris Wilson [Thu, 15 Nov 2018 20:38:51 +0000 (20:38 +0000)]
drm/i915/selftests: Workaround an issue with unused lockdep subclass
lockdep insists that if we give a lock a subclass, it must be used.
Failure to do so triggers a self-consistency check when reading
lockdep_stats:
[ 49.902002] DEBUG_LOCKS_WARN_ON(debug_atomic_read(nr_unused_locks) != nr_unused)
[ 49.902009] WARNING: CPU: 3 PID: 383 at kernel/locking/lockdep_proc.c:249 lockdep_stats_show+0x984/0xa10
[ 49.902026] Modules linked in: nls_ascii nls_cp437 vfat fat crct10dif_pclmul crc32_pclmul crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper intel_cstate intel_uncore intel_rapl_perf intel_gtt efivars prime_numbers ahci libahci i2c_i801 video button efivarfs [last unloaded: drm_kms_helper]
[ 49.902059] CPU: 3 PID: 383 Comm: cat Tainted: G U 4.20.0-rc2+ #304
[ 49.902068] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 49.902079] RIP: 0010:lockdep_stats_show+0x984/0xa10
[ 49.902086] Code: 00 85 c0 0f 84 aa f8 ff ff 8b 05 77 37 e2 00 85 c0 0f 85 9c f8 ff ff 48 c7 c6 e0 57 bc 81 48 c7 c7 28 30 bb 81 e8 6b 77 fa ff <0f> 0b e9 82 f8 ff ff 48 c7 44 24 50 00 00 00 00 45 31 e4 31 db 31
[ 49.902103] RSP: 0018:
ffffc90000247d58 EFLAGS:
00010292
[ 49.902110] RAX:
0000000000000044 RBX:
00000000000002f0 RCX:
0000000000000000
[ 49.902118] RDX:
0000000000000002 RSI:
0000000000000001 RDI:
ffffffff810b3464
[ 49.902126] RBP:
0000000000000039 R08:
0000000000000002 R09:
0000000000000000
[ 49.902133] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000007ead
[ 49.902141] R13:
0000000000000001 R14:
ffff88884c021000 R15:
0000000000000097
[ 49.902150] FS:
00007fb347e66540(0000) GS:
ffff88885e600000(0000) knlGS:
0000000000000000
[ 49.902159] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 49.902165] CR2:
00007fb347aeb000 CR3:
00000008544bd005 CR4:
00000000001606e0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115203851.25739-1-chris@chris-wilson.co.uk
Lucas De Marchi [Wed, 14 Nov 2018 01:15:09 +0000 (17:15 -0800)]
drm/i195: spell out reverse on for_each macros
Do like it's done for list.h macros, and use "reverse" suffix rather
than "rev".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114011509.3667-3-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 14 Nov 2018 01:15:08 +0000 (17:15 -0800)]
drm/i915/icl: reverse uninit order
Bspec 21257 says "DDIA PHY is the comp master, so it must
not be un-initialized if other combo PHYs are in use". Here
we are shutting down all phys, so it's not strictly required.
However let's be consistent on deinitializing things in the
reversed order we initialized them.
v2: simplify protection for enum port being unsigned in future
v3: spell out reverse rather than rev
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114011509.3667-2-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 14 Nov 2018 01:15:07 +0000 (17:15 -0800)]
drm/i915/icl: replace check for combo phy
These are the only places that assume ports A and B are the ones with
combo phy. Let's use intel_port_is_combophy() there to make sure
it checks for combo phy ports the same way everywhere.
v2: define for_each_combo_port() helper to check the ports
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114011509.3667-1-lucas.demarchi@intel.com
Dave Airlie [Thu, 15 Nov 2018 22:52:14 +0000 (08:52 +1000)]
Merge tag 'drm-intel-fixes-2018-11-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix Bugzilla #108712: Fix incorrect EU count report from kernel
- Fix to account for scale factor when calculating initial phase on scaled output
- Avoid too trigger-happy HPD storm detection and fix a race and an OOPS for MST systems.
- Relocation race fix for Gen4/5
- A couple ICL fixes and dependencies for above Fixes:.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115164709.GA13430@jlahtine-desk.ger.corp.intel.com
Linus Torvalds [Thu, 15 Nov 2018 17:26:09 +0000 (11:26 -0600)]
Merge tag 'selinux-pr-
20181115' of git://git./linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Two small SELinux fixes for v4.20.
Ondrej's patch adds a check on user input, and my patch ensures we
don't look past the end of a buffer.
Both patches are quite small and pass the selinux-testsuite"
* tag 'selinux-pr-
20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix non-MLS handling in mls_context_to_sid()
selinux: check length properly in SCTP bind hook
Linus Torvalds [Thu, 15 Nov 2018 17:20:06 +0000 (11:20 -0600)]
Merge tag 'pinctrl-v4.20-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- A bunch of fixes for the Allwinner meson platform
- Establish a git repo for Intel pin control in MAINTAINERS
* tag 'pinctrl-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: Add tree link for Intel pin control driver
pinctrl: meson: fix meson8b ao pull register bits
pinctrl: meson: fix meson8 ao pull register bits
pinctrl: meson: fix gxl ao pull register bits
pinctrl: meson: fix gxbb ao pull register bits
pinctrl: meson: fix pinconf bias disable
Linus Torvalds [Thu, 15 Nov 2018 16:59:37 +0000 (10:59 -0600)]
Merge tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Don't exit the NFSv4 state manager without clearing
NFS4CLNT_MANAGER_RUNNING
Bugfixes:
- Fix an Oops when destroying the RPCSEC_GSS credential cache
- Fix an Oops during delegation callbacks
- Ensure that the NFSv4 state manager exits the loop on SIGKILL
- Fix a bogus get/put in generic_key_to_expire()"
* tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix an Oops during delegation callbacks
SUNRPC: Fix a bogus get/put in generic_key_to_expire()
SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache
NFSv4: Ensure that the state manager exits the loop on SIGKILL
NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING
Dave Airlie [Thu, 15 Nov 2018 16:14:42 +0000 (02:14 +1000)]
Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.20:
- Fix for huge page handling that caused a GPUVM fault in some cases
- Fix IH ring setup
- Fix for xgmi aperture setup
- Fix for watermark setup for SMU
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114171853.2866-1-alexander.deucher@amd.com
Dave Airlie [Thu, 15 Nov 2018 16:12:27 +0000 (02:12 +1000)]
Merge tag 'drm-misc-fixes-2018-11-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Cross-subsystem:
- omap: Instantiate dss children in omapdss instead of mach (Laurent)
Other:
- htmldocs build warning (Sean)
- MST NULL deref fix (Stanislav)
- omap: Various runtime ref gets on probe/bind (Laurent)
- omap: Fix to the above dss children patch (Tony)
Cc: Sean Paul <sean@poorly.run>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114204542.GA52569@art_vandelay
Jani Nikula [Thu, 15 Nov 2018 10:52:37 +0000 (12:52 +0200)]
drm/i915/bios: make the aux channel macros private to the vbt parser
Hide the aux channel macros in intel_vbt_defs.h now that their use has
been abstracted in intel_bios_port_aux_ch().
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115105237.1237-3-jani.nikula@intel.com
Jani Nikula [Thu, 15 Nov 2018 10:52:36 +0000 (12:52 +0200)]
drm/i915: remove unused DDC PIN macros
Their user has vanished in the course of history. Remove.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115105237.1237-2-jani.nikula@intel.com
Jani Nikula [Thu, 15 Nov 2018 10:52:35 +0000 (12:52 +0200)]
drm/i915/bios: rename intel_aux_ch() to intel_bios_port_aux_ch()
Conform to function naming in intel_bios.c.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115105237.1237-1-jani.nikula@intel.com
Clint Taylor [Wed, 31 Oct 2018 20:54:55 +0000 (13:54 -0700)]
drm/i915/hdmi: Reorder structure to match specification
reorder structure of 297, 594 N values to group Audio Sample Frequencies
together to make updating from HDMI specification easier.
V2: Match patch 1/2 version
V3: Arrange by sample freq, then pixel clock.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541019295-20016-1-git-send-email-clinton.a.taylor@intel.com
Gustavo Romero [Thu, 15 Nov 2018 02:33:30 +0000 (21:33 -0500)]
selftests/powerpc: Adjust wild_bctr to build with old binutils
Currently the selftest wild_bctr can fail to build when an old gcc is
used, notably on gcc using a binutils version <= 2.27, because the
assembler does not support the integer suffix UL.
This patch adjusts the wild_bctr test so the REG_POISON value is still
treated as an unsigned long for the shifts on compilation but the UL
suffix is absent on the stringification, so the inline asm code
generated has no UL suffixes.
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
[mpe: Wrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ville Syrjälä [Wed, 14 Nov 2018 13:32:55 +0000 (15:32 +0200)]
drm/i915: Account for scale factor when calculating initial phase
To get the initial phase correct we need to account for the scale
factor as well. I forgot this initially and was mostly looking at
heavily upscaled content where the minor difference between -0.5
and the proper initial phase was not readily apparent.
And let's toss in a comment that tries to explain the formula
a little bit.
v2: The initial phase upper limit is 1.5, not 24.0!
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com
Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit
e7a278a329dd8aa2c70c564849f164cb5673689c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Ville Syrjälä [Wed, 14 Nov 2018 11:49:24 +0000 (13:49 +0200)]
drm/i915: Clean up skl_program_scaler()
Remove the "sizes are 0 based" stuff that is not even true for the
scaler.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit
d0105af939769393d6447a04cee2d1ae12e3f09a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Maarten Lankhorst [Wed, 14 Nov 2018 11:49:23 +0000 (13:49 +0200)]
drm/i915: Move programming plane scaler to its own function.
This cleans the code up slightly, and will make other changes easier.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-8-maarten.lankhorst@linux.intel.com
(cherry picked from commit
ab5c60bf76755d24ae8de5c1c6ac594934656ace)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Jani Nikula [Wed, 14 Nov 2018 11:21:30 +0000 (13:21 +0200)]
drm/i915: remove excess line continuation backslashes
While removing .palette_offsets, I removed the commas after
.trans_offsets in the macros, but failed to remove the line continuation
backslashes.
While at it, also remove another extra comma to be in line with the
other related macros.
Fixes: 74c1e826427a ("drm/i915: remove palette_offsets from device info in favor of _PICK()")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114112130.22264-1-jani.nikula@intel.com
Maarten Lankhorst [Tue, 13 Nov 2018 09:28:04 +0000 (10:28 +0100)]
drm/i915: Fix plane allocation/free functions
Use intel_plane_destroy_state in intel_plane_free to free the state.
Also fix intel_plane_alloc() to use __drm_atomic_helper_plane_reset(),
to get sane defaults from the atomic core.
This is needed to get the correct alpha value and blend mode from the
core, and any new default values added from new properties.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.")
[mlankhorst: Update commit description to mention alpha blend support]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113092804.13304-1-maarten.lankhorst@linux.intel.com
Ard Biesheuvel [Wed, 14 Nov 2018 17:55:44 +0000 (09:55 -0800)]
efi: Permit calling efi_mem_reserve_persistent() from atomic context
Currently, efi_mem_reserve_persistent() may not be called from atomic
context, since both the kmalloc() call and the memremap() call may
sleep.
The kmalloc() call is easy enough to fix, but the memremap() call
needs to be moved into an init hook since we cannot control the
memory allocation behavior of memremap() at the call site.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ard Biesheuvel [Wed, 14 Nov 2018 17:55:43 +0000 (09:55 -0800)]
efi/arm: Defer persistent reservations until after paging_init()
The new memory EFI reservation feature we introduced to allow memory
reservations to persist across kexec may trigger an unbounded number
of calls to memblock_reserve(). The memblock subsystem can deal with
this fine, but not before memblock resizing is enabled, which we can
only do after paging_init(), when the memory we reallocate the array
into is actually mapped.
So break out the memreserve table processing into a separate routine
and call it after paging_init() on arm64. On ARM, because of limited
reviewing bandwidth of the maintainer, we cannot currently fix this,
so instead, disable the EFI persistent memreserve entirely on ARM so
we can fix it later.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ard Biesheuvel [Wed, 14 Nov 2018 17:55:42 +0000 (09:55 -0800)]
efi/arm/libstub: Pack FDT after populating it
Commit:
24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
increased the allocation size for the FDT image created by the stub to a
fixed value of 2 MB, to simplify the former code that made several
attempts with increasing values for the size. This is reasonable
given that the allocation is of type EFI_LOADER_DATA, which is released
to the kernel unless it is explicitly memblock_reserve()d by the early
boot code.
However, this allocation size leaked into the 'size' field of the FDT
header metadata, and so the entire allocation remains occupied by the
device tree binary, even if most of it is not used to store device tree
information.
So call fdt_pack() to shrink the FDT data structure to its minimum size
after populating all the fields, so that the remaining memory is no
longer wasted.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ard Biesheuvel [Wed, 14 Nov 2018 17:55:41 +0000 (09:55 -0800)]
efi/arm: Revert deferred unmap of early memmap mapping
Commit:
3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT")
deferred the unmap of the early mapping of the UEFI memory map to
accommodate the ACPI BGRT code, which looks up the memory type that
backs the BGRT table to validate it against the requirements of the UEFI spec.
Unfortunately, this causes problems on ARM, which does not permit
early mappings to persist after paging_init() is called, resulting
in a WARN() splat. Since we don't support the BGRT table on ARM anway,
let's revert ARM to the old behaviour, which is to take down the
early mapping at the end of efi_init().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...")
Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Waiman Long [Wed, 14 Nov 2018 17:55:40 +0000 (09:55 -0800)]
efi: Fix debugobjects warning on 'efi_rts_work'
The following commit:
9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")
converted 'efi_rts_work' from an auto variable to a global variable.
However, when submitting the work, INIT_WORK_ONSTACK() was still used,
causing the following complaint from debugobjects:
ODEBUG: object
00000000ed27b500 is NOT on stack
00000000c7d38760, but annotated.
Change the macro to just INIT_WORK() to eliminate the warning.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")
Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nicholas Piggin [Thu, 15 Nov 2018 02:34:27 +0000 (12:34 +1000)]
powerpc/64: Fix kernel stack 16-byte alignment
Commit
4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather
than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8,
which causes the interrupt frame allocation on kernel entry to put the
kernel stack out of alignment.
Quadword (16-byte) alignment for the stack is required by both the
64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1).
Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this
in future.
Fixes: 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Wed, 14 Nov 2018 23:14:40 +0000 (17:14 -0600)]
Merge tag 'riscv-for-linus-4.20-rc2' of git://git./linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a few patches that fix various issues in the RISC-V
port:
- enable printk timestamps in the RISC-V defconfig.
- a whitespace fix to "struct pt_regs".
- add a "vdso_install" target for RISC-V.
- a pair of build fixes: one to fix a typo in our makefile, and one
to clean up some warnings.
There will probably be more patches from us for 4.20, but I don't have
anything that's ready to go right now so I'm going to hold off a bit.
Right now the only concrete thing I know I want to make sure gets
sorted out is our 32-bit stat interface, which I don't want sitting in
limbo for another cycle as we have to get RV32I glibc sone"
* tag 'riscv-for-linus-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Silence some module warnings on 32-bit
RISC-V: lib: Fix build error for 64-bit
riscv: add missing vdso_install target
riscv: fix spacing in struct pt_regs
RISC-V: defconfig: Enable printk timestamps
Linus Torvalds [Wed, 14 Nov 2018 23:07:01 +0000 (17:07 -0600)]
Merge tag 'kgdb-fixes-4.20-rc3' of https://git.linaro.org/people/daniel.thompson/linux
Pull kgdb fixes from Daniel Thompson:
"The most important changes here are two fixes for kdb regressions
causes by the hashing of %p pointers together with a fix for a
potential overflow in kdb tab completion handling (and warning fix).
Also included are a set of changes in preparation to (eventually)
enable -Wimplicit-fallthrough"
* tag 'kgdb-fixes-4.20-rc3' of https://git.linaro.org/people/daniel.thompson/linux:
kdb: kdb_support: mark expected switch fall-throughs
kdb: kdb_keyboard: mark expected switch fall-throughs
kdb: kdb_main: refactor code in kdb_md_line
kdb: Use strscpy with destination buffer size
kdb: print real address of pointers instead of hashed addresses
kdb: use correct pointer when 'btc' calls 'btt'
Linus Torvalds [Wed, 14 Nov 2018 23:03:24 +0000 (17:03 -0600)]
Merge branch 'fixes-v4.20-rc3' of git://git./linux/kernel/git/jmorris/linux-security
Pull integrity fix from James Morris:
"Fix a bug introduced with in this merge window in
82f94f24475c ("KEYS:
Provide software public key query function [ver #2]")"
* 'fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
integrity: support new struct public_key_signature encoding field
Linus Torvalds [Wed, 14 Nov 2018 21:36:45 +0000 (15:36 -0600)]
Merge tag 'acpi-4.20-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recently introduced build issue in the xpower PMIC driver (Arnd
Bergmann)"
* tag 'acpi-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PMIC: xpower: fix IOSF_MBI dependency
Linus Torvalds [Wed, 14 Nov 2018 21:33:45 +0000 (15:33 -0600)]
Merge tag 'pm-4.20-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These remove a stale DT entry left behind after recent removal of a
cpufreq driver without users, fix up error handling in the imx6q
cpufreq driver, fix two issues in the cpufreq documentation, and
update the ARM cpufreq driver.
Specifics:
- Drop stale DT binding for the arm_big_little_dt driver removed
recently (Sudeep Holla).
- Fix up error handling in the imx6q cpufreq driver to make it report
voltage scaling failures (Anson Huang).
- Fix two issues in the cpufreq documentation (Viresh Kumar, Zhao Wei
Liew).
- Fix ARM cpuidle driver initialization regression from the 4.19 time
frame and rework the driver registration part of it to simplify
code (Ulf Hansson)"
* tag 'pm-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: cpuidle: Convert to use cpuidle_register|unregister()
ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO
dt-bindings: cpufreq: remove stale arm_big_little_dt entry
Documentation: cpufreq: Correct a typo
cpufreq: imx6q: add return value check for voltage scale
Documentation: cpu-freq: Frequencies aren't always sorted
projects / openwrt / staging / blogic.git / log