lib/scatterlist: Introduce and export __sg_alloc_table_from_pages

Drivers like i915 benefit from being able to control the maxium
size of the sg coalesced segment while building the scatter-
gather list.

Introduce and export the __sg_alloc_table_from_pages function
which will allow it that control.

v2: Reorder parameters. (Chris Wilson)
v3: Fix incomplete reordering in v2.
v4: max_segment needs to be page aligned.
v5: Rebase.
v6: Rebase.
v7: Fix spelling in commit and mention max segment size in
    __sg_alloc_table_from_pages kerneldoc. (Andrew Morton)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-kernel@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803091351.23594-1-tvrtko.ursulin@linux.intel.com

lib/scatterlist: Avoid potential scatterlist entry overflow

Since the scatterlist length field is an unsigned int, make
sure that sg_alloc_table_from_pages does not overflow it while
coalescing pages to a single entry.

v2: Drop reference to future use. Use UINT_MAX.
v3: max_segment must be page aligned.
v4: Do not rely on compiler to optimise out the rounddown.
    (Joonas Lahtinen)
v5: Simplified loops and use post-increments rather than
    pre-increments. Use PAGE_MASK and fix comment typo.
    (Andy Shevchenko)
v6: Commit spelling fix.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803091312.22875-1-tvrtko.ursulin@linux.intel.com

lib/scatterlist: Fix offset type in sg_alloc_table_from_pages

Scatterlist entries have an unsigned int for the offset so
correct the sg_alloc_table_from_pages function accordingly.

Since these are offsets withing a page, unsigned int is
wide enough.

Also converts callers which were using unsigned long locally
with the lower_32_bits annotation to make it explicitly
clear what is happening.

v2: Use offset_in_page. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomasz Stanislawski <t.stanislaws@samsung.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> (v1)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731185512.20010-1-tvrtko.ursulin@linux.intel.com

drm/i915: Disable snooping (userptr, set-cache-level) on gen4

The original gen4 has an issue where writes (both render and blt) into
snoopable pages are lost. We've previously worked around this in
userspace (ddx, igt) by simply not requesting snoopable buffers, but upon
rediscovering this problem for a third time, make the kernel reject such
requests with -ENODEV.

This disables snooping on userspace buffers for i965g and i965gm (original
gen4) machines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906192424.26970-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20170907

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/cnl: WaThrottleEUPerfToAvoidTDBackPressure:cnl(pre-prod)

Wa for B-stepping only.

A for a hang issue that requires throttling EU performace
to 12.5% to avoid back pressure to thread dispatch

v2: Rebased. No change from v1.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906220325.24524-1-rodrigo.vivi@intel.com

drm/i915: Lift has-pinned-pages assert to caller of ____i915_gem_object_get_pages

i915_gem_object_attach_phys() is trying to swap out its shmemfs pages
for a new set of physically contiguous pages, but unfortunately triggers
an assert inside get-pages.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102561
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906135220.13508-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk

Skip compressing 1 segment at the end of the frame,
avoid a pixel count mismatch nuke event when last active
pixel and dummy pixel has same color for Odd Plane
Width / Height.

For both platforms Gemini Lake and Cannon Lake.

v2: Use function-like macro and also use mask to clean
    to make sure bit 11 is 0. (Suggested by Paulo).
v3: Add Display WA notation and also apply for GLK.
    Both Forgotten on v2.
    Using "GLK_" prefix since GLK came before CNL.
v4: Forgot to "|=" when moving directly macro to masked
    val. (Noticed by Paulo.)
v5: Rebased on top of 0a46ddd57c9e ("drm/i915/cnp: Wa 1181:
    Fix Backlight issue")

Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905193013.31710-1-rodrigo.vivi@intel.com

drm/i915/cnl: Allow the reg_read ioctl to read the RCS TIMESTAMP register

This enables the Mesa driver to advertise support for ARB_timer_query, and
thus an OpenGL version higher than 3.2.

Suggested-by: Ben Widawsky <ben@bwidawsk.net>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905184507.30046-1-nanley.g.chery@intel.com

drm/i915: Move device_info.has_snoop into the static tables

Currently we define any !llc machine as using snoop instead. However,
some platforms run into trouble using snoop that we would like to
disable, and to do so easily we want to be able to use the static
device_info tables.

v2: Leave the old snoop = !llc as a warning for the time being to check
that all stanzas are filled as either llc or snoop.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906105653.3665-1-chris@chris-wilson.co.uk

drm/i915: Disable MI_STORE_DATA_IMM for i915g/i915gm

The early gen3 machines (i915g/Grantsdale and i915gm/Alviso) share a lot
of characteristics in their MI/GTT blocks with gen2, and in particular
can only use physical addresses in MI_STORE_DATA_IMM. This makes it
incompatible with our usage, so include those two machines in the
blacklist to prevent usage.

v2: Make it easy for gcc and rewrite it as a switch to save some space.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20170906152859.5304-1-chris@chris-wilson.co.uk

drm/i915: Re-enable GTT following a device reset

Ville Syrjälä spotted that PGETBL_CTL was losing its enable bit upon a
reset. That was causing the display to show garbage on his 945gm. On my
i915gm the effect was far more severe; re-enabling the display following
the reset without PGETBL_CTL being enabled lead to an immediate hard
hang.

We do have a routine to re-enable PGETBL_CTL which is applicable to
gen2-4, although on gen4 it is documented that a graphics reset doesn't
alter the register (no such wording is given for gen3) and should be safe
to call to punch back in the enable bit. However, that leaves the question
of whether we need to completely re-initialise the register and the
rest of the GSM. For g33/pnv/gen4+, where we do have a configurable
page table, its contents do seem to be kept, and so we should be able to
recover without having to reinitialise the GTT from scratch (as prior to
g33, that register is configured by the BIOS and we leave alone except
for the enable bit).

This appears to have been broken by commit 5fbd0418eef2 ("drm/i915:
Re-enable GGTT earlier during resume on pre-gen6 platforms"), which
moved the intel_enable_gtt() from i915_gem_init_hw() (also used by
reset) to add it earlier during hw init and resume, missing the reset
path.

v2: Find the culprit, rearrange ggtt_enable to be before gem_init_hw to
match init/resume

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 5fbd0418eef2 ("drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101852
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906111405.27110-1-chris@chris-wilson.co.uk
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/cnp: Wa 1181: Fix Backlight issue

This workaround fixes a CNL PCH bug when changing
backlight from a lower frequency to a higher frequency.

During random reboot cycles, display backlight seems to
be off/ dim for 2-3 mins.

The only functional change on this patch is to
set bit 13 of 0xC2020 for CNL PCH.

The rest of patch is organizing identation around
those bits definitions and re-organizing CFL workarounds.

v2: Only add the bit that matters without touching others
    around (Jani).
    Rebase on top of clock gating functions rename.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170831045223.3960-1-rodrigo.vivi@intel.com

drm/i915: Annotate user relocs with __user

Add the missing __user to the urelocs cast to fix the following sparse
warning:
i915_gem_execbuffer.c:1541:47: warning: cast removes address space of expression
i915_gem_execbuffer.c:1541:62: warning: incorrect type in argument 2 (different address spaces)
i915_gem_execbuffer.c:1541:62:    expected void const [noderef] <asn:1>*from
i915_gem_execbuffer.c:1541:62:    got char *

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165434.24636-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc

drm/i915: Constify load detect mode

Make the mode used for load detection const, and adjust all relevant
functions to accept a const mode.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170518193837.393-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/perf: Remove __user from u64 in drm_i915_perf_oa_config

Sparse complains that these integers from which we form void __user *,
and so we don't need the annotation itself inside the uABI.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901145729.21363-2-chris@chris-wilson.co.uk
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915: Silence sparse by using gfp_t

Sparse enforces that GFP flags are only manipulated inside gfp_t locals.

Fixes: 4d470f7359c4 ("drm/i915: Avoid undefined behaviour of "u32 >> 32"")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901145729.21363-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm-upstream/drm-next into drm-intel-next-queued

Catch up with upstream while it's easy.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: io unmap functions want __iomem

Don't cast away the __iomem from the io_mapping functions so that
sparse won't be so unhappy when we pass the pointer to the unmap
functions. Instead let's move the cast to where we actually use the
pointer.

Fixes the following sparse warnings:
i915_gem.c:1022:33: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:1022:33:    expected void [noderef] <asn:2>*vaddr
i915_gem.c:1022:33:    got void *[assigned] vaddr
i915_gem.c:1027:34: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:1027:34:    expected void [noderef] <asn:2>*vaddr
i915_gem.c:1027:34:    got void *[assigned] vaddr
i915_gem.c:1199:33: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:1199:33:    expected void [noderef] <asn:2>*vaddr
i915_gem.c:1199:33:    got void *[assigned] vaddr
i915_gem.c:1204:34: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:1204:34:    expected void [noderef] <asn:2>*vaddr
i915_gem.c:1204:34:    got void *[assigned] vaddr

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901171252.31025-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Add __rcu to radix tree slot pointer

radix_tree_for_each_slot() wants an __rcu annotated pointer for the
slot. So let's add the annotation.

Fixes the following sparse warnings:
i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces)
i915_gem.c:2217:9:    expected void **slot
i915_gem.c:2217:9:    got void [noderef] <asn:4>**
i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces)
i915_gem.c:2217:9:    expected void **slot
i915_gem.c:2217:9:    got void [noderef] <asn:4>**
i915_gem.c:2217:9: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:2217:9:    expected void [noderef] <asn:4>**slot
i915_gem.c:2217:9:    got void **slot
i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces)
i915_gem.c:2217:9:    expected void **slot
i915_gem.c:2217:9:    got void [noderef] <asn:4>**

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 96d776345277 ("drm/i915: Use a radixtree for random access to the object's backing storage")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901171252.31025-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Wake up the device for the fbdev setup

Our fbdev setup requires the device to be awake for access
through the GTT. If one boots without connected displays and
later plugs one in, we won't have any runtime PM references when
the fbdev setup runs. Explicitly grab a runtime PM reference during
the fbdev setup to avoid the following spew:

[   62.518435] RPM wakelock ref not held during HW access
[   62.518459] ------------[ cut here ]------------
[   62.518546] WARNING: CPU: 3 PID: 37 at ../drivers/gpu/drm/i915/intel_drv.h:1800 i915_vma_pin_iomap+0x144/0x150 [i915]
[   62.518585] Modules linked in: i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm intel_gtt agpgart netconsole nls_iso8859_1 nls_cp437 vfat fat efi_pstore coretemp hwmon intel_rapl x86_pkg_temp_thermal e1000e efivars ptp pps_core video evdev ip_tables x_tables ipv6 autofs4
[   62.518741] CPU: 3 PID: 37 Comm: kworker/3:1 Not tainted 4.13.0-rc7-skl+ #1077
[   62.518770] Hardware name:                  /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017
[   62.518827] Workqueue: events i915_hotplug_work_func [i915]
[   62.518853] task: ffff88046c00dc00 task.stack: ffffc90000184000
[   62.518896] RIP: 0010:i915_vma_pin_iomap+0x144/0x150 [i915]
[   62.518919] RSP: 0018:ffffc90000187cc8 EFLAGS: 00010292
[   62.518942] RAX: 000000000000002a RBX: ffff880460044000 RCX: 0000000000000006
[   62.518969] RDX: 0000000000000006 RSI: ffffffff819c3e6f RDI: ffffffff819f1c0e
[   62.518996] RBP: ffffc90000187cd8 R08: ffff88046c00e4f0 R09: 0000000000000000
[   62.519022] R10: ffff8804669ca800 R11: 0000000000000000 R12: ffff880461d20000
[   62.519049] R13: ffffc90000187d48 R14: ffff880461d20000 R15: ffff880460044000
[   62.519076] FS:  0000000000000000(0000) GS:ffff88047ed80000(0000) knlGS:0000000000000000
[   62.519107] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   62.519130] CR2: 000056478ae213f0 CR3: 0000000002c0f000 CR4: 00000000003406e0
[   62.519156] Call Trace:
[   62.519190]  intelfb_create+0x176/0x360 [i915]
[   62.519216]  __drm_fb_helper_initial_config_and_unlock+0x1c7/0x3c0 [drm_kms_helper]
[   62.519251]  drm_fb_helper_hotplug_event.part.18+0xac/0xc0 [drm_kms_helper]
[   62.519282]  drm_fb_helper_hotplug_event+0x1a/0x20 [drm_kms_helper]
[   62.519324]  intel_fbdev_output_poll_changed+0x1a/0x20 [i915]
[   62.519352]  drm_kms_helper_hotplug_event+0x27/0x30 [drm_kms_helper]
[   62.519395]  i915_hotplug_work_func+0x24e/0x2b0 [i915]
[   62.519420]  process_one_work+0x1d3/0x6d0
[   62.519440]  worker_thread+0x4b/0x400
[   62.519458]  ? schedule+0x4a/0x90
[   62.519475]  ? preempt_count_sub+0x97/0xf0
[   62.519495]  kthread+0x114/0x150
[   62.519511]  ? process_one_work+0x6d0/0x6d0
[   62.519530]  ? kthread_create_on_node+0x40/0x40
[   62.519551]  ret_from_fork+0x27/0x40
[   62.519569] Code: c4 78 e6 e0 0f ff e9 08 ff ff ff 80 3d d5 bc 0c 00 00 0f 85 0b ff ff ff 48 c7 c7 d8 50 32 a0 c6 05 c1 bc 0c 00 01 e8 9d 78 e6 e0 <0f> ff e9 f1 fe ff ff 0f 1f 44 00 00 0f 1f 44 00 00 0f b6 87 98
[   62.519771] ---[ end trace 5fbe271f991a58ae ]---

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901195456.6386-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Add interface to reserve fence registers for vGPU

In the past, vGPU alloc fence registers by walking through mm.fence_list
to find fence which pin_count = 0 and vma is empty. vGPU may not find
enough fence registers this way. Because a fence can be bind to vma even
though it is not in using. We have found such failure many times these
days.

An option to resolve this issue is that we can force-remove fence from
vma in this case.

This patch added two new api to the fence management code:
 - i915_reserve_fence() will try to find a free fence from fence_list
   and force-remove vma if need.
 - i915_unreserve_fence() reclaim a reserved fence after vGPU has
   finished.

With this change, the fence management is more clear to work with vGPU.
GVTg do not need remove fence from fence_list in private.

v3: (Chris)
  - Add struct_mutex lock assertion.
  - Only count for unpinned fence.

v2: (Chris)
  - Rename the new api for symmetry.
  - Add safeguard to ensure at least 1 fence remained for host display.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1504512061-5892-1-git-send-email-changbin.du@intel.com
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use correct path to trace include

The header comment in include/trace/define_trace.h specifies that the
TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header
rather than the trace file including it. Most instances get that wrong
and work around it by adding the $(src) directory to the include path.

While this works, it is preferable to refer to the correct path to the
trace file in the first place and avoid any workaround.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901144954.19620-4-thierry.reding@gmail.com

drm/i915: Fix the missing PPAT cache attributes on CNL

Add back the GEN8_PPAT_WB cache attributes in cnl_setup_private_ppat(),
which are missed on CNL.

Fixes: 4e34935fcf69 ("drm/i915/cnl: Setup PAT Index.")
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504208177-27784-1-git-send-email-zhi.a.wang@intel.com

drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder

Use enum pipe for PCH transcoders also in the FIFO underrun code.

Fixes the following new sparse warnings:
intel_fifo_underrun.c:340:49: warning: mixing different enum types
intel_fifo_underrun.c:340:49:     int enum pipe  versus
intel_fifo_underrun.c:340:49:     int enum transcoder
intel_fifo_underrun.c:344:49: warning: mixing different enum types
intel_fifo_underrun.c:344:49:     int enum pipe  versus
intel_fifo_underrun.c:344:49:     int enum transcoder
intel_fifo_underrun.c:397:57: warning: mixing different enum types
intel_fifo_underrun.c:397:57:     int enum pipe  versus
intel_fifo_underrun.c:397:57:     int enum transcoder
intel_fifo_underrun.c:398:17: warning: mixing different enum types
intel_fifo_underrun.c:398:17:     int enum pipe  versus
intel_fifo_underrun.c:398:17:     int enum transcoder

Cc: Matthias Kaehlcke <mka@chromium.org>
Fixes: a21960339c8c ("drm/i915: Consistently use enum pipe for PCH transcoders")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Make i2c lock ops static

Make gmbus_lock_ops and proxy_lock_ops static to appease sparse
intel_i2c.c:652:34: warning: symbol 'gmbus_lock_ops' was not declared. Should it be static?
intel_sdvo.c:2981:34: warning: symbol 'proxy_lock_ops' was not declared. Should it be static?

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: a85066840d29 ("drm/i915: Rework sdvo proxy i2c locking")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Make i9xx_load_ycbcr_conversion_matrix() static

Make i9xx_load_ycbcr_conversion_matrix() static to appease sparse:
intel_color.c:110:6: warning: symbol 'i9xx_load_ycbcr_conversion_matrix' was not declared. Should it be static?

Cc: Shashank Sharma <shashank.sharma@intel.com>
Fixes: 25edf91501b8 ("drm/i915: prepare csc unit for YCBCR420 output")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Eliminate crtc->state usage from intel_atomic_commit_tail and .crtc_update()

We already have the correct new crtc state so just use that instead of
crtc->state.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-7-ville.syrjala@linux.intel.com

drm/i915: Eliminate crtc->state usage from intel_update_pipe_config()

Pass the correct new crtc state to intel_update_pipe_config() instead
of using crtc->state.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-6-ville.syrjala@linux.intel.com

drm/i915: Eliminate obj->state usage from pre/post plane update

Dig up the appropriate new crtc and plane states from the top level
atomic state in intel_pre_plane_update() and intel_post_plane_update().

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-5-ville.syrjala@linux.intel.com

drm/i915: Pass proper old/new states to intel_plane_atomic_check_with_state()

Eliminate plane->state and crtc->state usage from
intel_plane_atomic_check_with_state() and its callers. Instead pass the
proper states in or dig them up from the top level atomic state.

Note that intel_plane_atomic_check_with_state() itself isn't allowed to
use the top level atomic state as there is none when it gets called from
the legacy cursor short circuit path.

v2: Rename some variables for easier comprehension (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: rework IS_*_GT* macros

We can now make use of the intel_device_info.gt field.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-4-lionel.g.landwerlin@intel.com

drm/i915: mark all device info struct with __initconst

As recommended by Chris.

v2: Switch from __initdata to __initconst.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-3-lionel.g.landwerlin@intel.com

drm/i915: add GT number to intel_device_info

Up to Coffeelake we could deduce this GT number from the device ID.
This doesn't seem to be the case anymore. This change reorders pciids
per GT and adds a gt field to intel_device_info. We set this field on
the following platforms :

   - SNB/IVB/HSW/BDW/SKL/KBL/CFL/CNL

Before & After :

$ modinfo drivers/gpu/drm/i915/i915.ko | grep ^alias | wc -l
209

v2: Add SNB & IVB (Chris)

v3: Fix compilation error in early-quirks (Lionel)

v4: Fix inconsistency between FEATURE/PLATFORM macros (Ville)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-2-lionel.g.landwerlin@intel.com

drm/i915/edp: Increase T12 panel delay to 900 ms to fix DP AUX CH timeouts

This patch fixes the DP AUX CH timeouts observed during CI runs causing
CI Failures on a specific PCI device. This issue was fixed previously
by adding a quirk but looks like we need to increase this delay even more
in order to get rid all the DP AUX CH timeouts.

Fixes: c99a259b4b5192ba ("drm/i915/edp: Add a T12 panel delay quirk to fix
DP AUX CH timeouts")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502823591-25310-1-git-send-email-manasi.d.navare@intel.com

drm/i915: Eliminate obj->state usage in g4x/vlv/chv wm computation

Use explicit old/new states instead of relying on obj->state.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-4-ville.syrjala@linux.intel.com

drm/i915: Pass the crtc state explicitly to intel_pipe_update_start/end()

Pass the appropriate new crtc state explicitly to
intel_pipe_update_start/end() instead of of mucking around with
crtc->state.

v2: The mmio flip stuff is gone

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-2-ville.syrjala@linux.intel.com

drm/i915: Pass the new crtc state to color management code

In an effort to eliminate the obj->state usage let's pass on the
new crtc state pointer (which we already have!) to the color management
code.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-1-ville.syrjala@linux.intel.com

drm/i915: Consolidate max_cdclk_freq check in intel_crtc_compute_min_cdclk()

Currently the .modeset_calc_cdclk() hooks check the final cdclk value
against the max allowed. That's not really sufficient since the low
level calc_cdclk() functions effectively clamp the minimum required
cdclk to the max supported by the platform. Hence if the minimum
required exceeds the platforms capabilities we'd keep going anyway
using the max cdclk frequency.

To fix that let's move the check earlier into
intel_crtc_compute_min_cdclk() and we'll check the minimum required
cdclk of the pipe against the maximum supported by the platform.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170710193347.8734-2-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915: Track minimum acceptable cdclk instead of "minimum dotclock"

Make the min_pixclk thing less confusing by changing it to track
the minimum acceptable cdclk frequency instead. This means moving
the application of the guardbands to a slightly higher level from
the low level platform specific calc_cdclk() functions.

The immediate benefit is elimination of the confusing 2x factors
on GLK/CNL+ in the audio workarounds (which stems from the fact
that the pipes produce two pixels per clock).

v2: Keep cdclk higher on CNL to workaround missing DDI clock voltage handling
v3: Squash with the CNL cdclk limits patch (DK)
v4: s/intel_min_cdclk/intel_pixel_rate_to_cdclk/ (DK)

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830185703.8189-1-ville.syrjala@linux.intel.com

drm/i915/cnl: Fix DP max voltage

On clock recovery this function is called to find out
the max voltage swing level that we could go.

However gen 9 functions use the old buffer translation tables
to figure that out. That table is not valid for CNL
causing an invalid number of entries and an invalid selection
on the max voltage swing level.

v2: Let's use same approach that previous platforms.
v3: Actually use n_entries and avoid duplicated -1.
v4: Avoid cnl_max_level and use current style.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170831145356.15932-1-rodrigo.vivi@intel.com

drm/i915/cnl: Fix DDI hdmi level selection.

Let's get a proper HDMI DDI entry level for vswing programming
sequences on CNL.

Spec doesn't specify any default for HDMI tables,
so let's pick the last entry as the default for now.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-7-rodrigo.vivi@intel.com

drm/i915/cnl: Move ddi buf trans related functions up.

No functional changes. But those functions will be needed
to get max level for HDMI and DP, so let's move those
up closer to other similar functions existent for previous
platforms.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-6-rodrigo.vivi@intel.com

drm/i915/cnl: Move voltage check into ddi buf trans functions.

Let's start converging CNL buf translations to same style
used on previous platforms. So first thing is to use the
standard signature so we don't need to propagate the voltage
check into other parts of the code, but only on the parts
that it is really useful.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-5-rodrigo.vivi@intel.com

drm/i915: Enable voltage swing before enabling DDI_BUF_CTL.

Sequences for DisplayPort asks us to
" Configure voltage swing and related IO settings.
Refer to DDI Buffer section."

before "Configure and enable DDI_BUF_CTL"

On BXT and CNL this means to execute the ddi vswing sequences.

At this point these sequences calls are getting duplicated for DP
because they are all called from DP link trainning sequences.

However this patch is not yet removing it before a futher discussion
since spec also allows that during link training without disabling
anything:

"
Notes
Changing voltage swing during link training:
Change the swing setting following the DDI Buffer section.
The port does not need to be disabled.
"

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-4-rodrigo.vivi@intel.com

drm/i915: Align vswing sequences with old ddi buffer registers.

Vswing sequences on BXT and CNL are equivalent
to the ddi buffer registers setting on other platforms.

For some reason it got aligned with skl_ddi_set_iboost what
is semantically incorrect. This forced us to keep skipping
ddi buffer translation tables on the platforms that has
the vswing sequences.

v2: Don't mess with DP signal levels on this patch.

Cc: Vandana Kannan <vandana.kannan@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-3-rodrigo.vivi@intel.com

drm/i915: decouple gen9 and gen10 dp signal levels.

Let's decouple bxt, glk and cnl dp signal levels
from other DDIs to avoid confusion.

No functional change. Only a reorg to avoid messing
with currently working DP signal levels when
moving voltage swing sequences around to match spec.

v2: ddi_signal_levels is also called from other ddi
    platforms, so don't remove IS_GEN9_BC check from
    skl_ddi_set_iboos. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-2-rodrigo.vivi@intel.com

drm/i915: Introduce intel_ddi_dp_level.

No functional changes. This only moves the DP level
selection to a separated function that will be later
used to organize better the vswing sequences.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-1-rodrigo.vivi@intel.com

drm/i915/cnl: Avoid ioremap_wc on Cannonlake as well.

Driver’s CPU access to GTT is via the GTTMMADR BAR.

The current HW implementation of that BAR is to only
support <= DW (and maybe QW) writes—not 16/32/64B writes
that could occur with WC and/or SSE/AVX moves.

GTTMMADR must be marked uncacheable (UC).
Accesses to GTTMMADR(GTT), must be 64 bits or less (ie. 1 GTT entry).

v2: Get clarification on the reasons and spec is getting
    updated to reflect it now.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Suggested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230907.21363-1-rodrigo.vivi@intel.com

drm/i915/cnl: WaDisableI2mCycleOnWRPort

On CNL B0 stepping GAM is not able to detect some deadlock
condition and then rise the rise the gam_coh_flush.

WA database and spec both mentions to set 4AB8[24]=1 as
workaround. Although register offset 0x4AB8 is not
documented for any platform.

References: HSD#1945815, BSID#1112

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230751.21047-1-rodrigo.vivi@intel.com

drm/i915/cnl: WA FtrEnableFastAnisoL1BankingFix

WA to enable HW L1 Banking fix that allows aniso to operate
at full sample rate.

References: HSD#1937670

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Anuj Phogat <anuj.phogat@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230723.20898-1-rodrigo.vivi@intel.com

drm/i915: Stop using long platform names on clock gating functions.

No functional changes.

Our code was only a bit messy with mixed style there so
let's clean up a bit using the short codenames for the platforms.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829052026.15038-1-rodrigo.vivi@intel.com

drm/i915: Skip fence alignemnt check for the CCS plane

The CCS won't have the same stride as the main surface anyway so trying
to guard against the fence stride not matching the CCS stride is
not sensible. Just skip the fence vs. fb alignment check for the aux
plane.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-3-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb05736c ("drm/i915: Add render decompression support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Treat fb->offsets[] as a raw byte offset instead of a linear offset

Userspace wants to treat fb->offsets[] as raw byte offsets into the gem
bo. Adjust the kernel code to match.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-2-ville.syrjala@linux.intel.com
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb05736c ("drm/i915: Add render decompression support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Always wake the device to flush the GTT

Since we hold the device wakeref when writing through the GTT (otherwise
the writes would fail), we presumed that before the device sleeps those
writes would naturally be flushed and that we wouldn't need our mmio
read trick. However, that presumption seems false and a sleepy bxt seems
to require us to always manually flush the GTT writes prior to direct
access.

Fixes: e2a2aa36a509 ("drm/i915: Check we have an wake device before flushing GTT writes")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829192546.1087-1-chris@chris-wilson.co.uk

drm/i915: Discard the request queue if we fail to sleep before suspend

If we fail to clear the outstanding request queue before suspending,
mark those requests as lost.

References: https://bugs.freedesktop.org/show_bug.cgi?id=102037
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Clear wedged status upon resume

When we wake up from suspend, the device has been powered down and
should come back afresh. We should be able to safely remove the wedged
status from the previous session and start afresh.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Always sanity check engine state upon idling

When we do a locked idle we know that afterwards all requests have been
completed and the engines have been cleared of tasks. For whatever
reason, this doesn't always happen and we may go into a suspend with
ELSP still full, and this causes an issue upon resume as we get very,
very confused.

If the engines refuse to idle, mark the device as wedged. In the process
we get rid of the maybe unused open-coded version of wait_for_engines
reported by Nick Desaulniers and Matthias Kaehlcke.

v2: Suppress the -EIO before suspend, but keep it for seqno wrap.

References: https://bugs.freedesktop.org/show_bug.cgi?id=101891
References: https://bugs.freedesktop.org/show_bug.cgi?id=102456
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Don't use GPU relocations prior to cmdparser stalls

If we are using the cmdparser, we will have to copy the batch and so
stall for the relocations. Rather than prolong that stall by adding more
relocation requests, just use CPU relocations and do the stall upfront.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826135620.25949-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Recreate vmapping even when the object is pinned

Sometimes we know we are the only user of the bo, but since we take a
protective pin_pages early on, an attempt to change the vmap on the
object is denied because it is busy. i915_gem_object_pin_map() cannot
tell from our single pin_count if the operation is safe. Instead we must
pass that information down from the caller in the manner of
I915_MAP_OVERRIDE.

This issue has existed from the introduction of the mapping, but was
never noticed as the only place where this conflict might happen is for
cached kernel buffers (such as allocated by i915_gem_batch_pool_get()).
Until recently there was only a single user (the cmdparser) so no
conflicts ever occurred. However, we now use it to allocate batches for
different operations (using MAP_WC on !llc for writes) in addition to the
existing shadow batch (using MAP_WB for reads).

We could either keep both mappings cached, or use a different write
mechanism if we detect a MAP_WB already exists (i.e. clflush
afterwards), but as we haven't seen this issue in the wild (it requires
hitting the GPU reloc path in addition to the cmdparser) for simplicity
just allow the mappings to be recreated.

v2: Include the i915_MAP_OVERRIDE bit in the enum so the compiler knows
about all the valid values.

Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_lut_handle # byt, completely by accident
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828104631.8606-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Remove excess indent in intel_finish_reset() caught by sparse

  CHECK   drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_display.c:3753 intel_finish_reset() warn: inconsistent indenting

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828104604.8552-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge branch 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux into drm-next

vmwgfx add fence fd support.

* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux:
  drm/vmwgfx: Bump the version for fence FD support
  drm/vmwgfx: Add export fence to file descriptor support
  drm/vmwgfx: Add support for imported Fence File Descriptor
  drm/vmwgfx: Prepare to support fence fd
  drm/vmwgfx: Fix incorrect command header offset at restart
  drm/vmwgfx: Support the NOP_ERROR command
  drm/vmwgfx: Restart command buffers after errors
  drm/vmwgfx: Move irq bottom half processing to threads
  drm/vmwgfx: Don't use drm_irq_[un]install

Merge tag 'exynos-drm-next-for-v4.14' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
- Provide NV12MT pixel format support of Mixer driver in generic way.
- Refactor Exynos KMS drivers
  . Refactoring to panel detection way
  . Refactoring to setting up possible_crtcs
  . Refactoring to video and command mode support
- Some cleanups

* tag 'exynos-drm-next-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: simplify set_pixfmt() in DECON and FIMD drivers
  drm/exynos: consistent use of cpp
  drm/exynos: mixer: remove src offset from mixer_graph_buffer()
  drm/exynos: mixer: simplify mixer_graph_buffer()
  drm/exynos: mixer: simplify vp_video_buffer()
  drm/exynos: mixer: enable NV12MT support for the video plane
  drm/exynos: mixer: fix chroma comment in vp_video_buffer()
  arm64: dts: exynos: remove i80-if-timings nodes
  dt-bindings: exynos5433-decon: remove i80-if-timings property
  drm/exynos/decon5433: use mode info stored in CRTC to detect i80 mode
  drm/exynos: add mode_valid callback to exynos_drm
  drm/exynos/decon5433: refactor irq requesting code
  drm/exynos/mic: use mode info stored in CRTC to detect i80 mode
  drm/exynos/dsi: propagate info about command mode from panel
  drm/exynos/dsi: refactor panel detection logic
  drm/exynos: use helper to set possible crtcs
  drm/exynos/decon5433: use readl_poll_timeout helpers

Merge tag 'drm-misc-next-fixes-2017-08-28' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:
- Rename u32 to __u32 in struct drm_format_modifier_blob (Lionel)

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
* tag 'drm-misc-next-fixes-2017-08-28' of git://anongit.freedesktop.org/git/drm-misc:
  drm: rename u32 in __u32 in uapi

drm/syncobj: Add a signal ioctl (v3)

This IOCTL provides a mechanism for userspace to trigger a sync object
directly.  There are other ways that userspace can trigger a syncobj
such as submitting a dummy batch somewhere or hanging on to a triggered
sync_file and doing an import.  This just provides an easy way to
manually trigger the sync object without weird hacks.

The motivation for this IOCTL is Vulkan fences.  Vulkan lets you create
a fence already in the signaled state so that you can wait on it
immediatly without stalling.  We could also handle this with a new
create flag to ask the driver to create a syncobj that is already
signaled but the IOCTL seemed a bit cleaner and more generic.

v2:
 - Take an array of sync objects (Dave Airlie)
v3:
 - Throw -EINVAL if pad != 0

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/syncobj: Add a reset ioctl (v3)

This just resets the dma_fence to NULL so it looks like it's never been
signaled.  This will be useful once we add the new wait API for allowing
wait on "submit and signal" behavior.

v2:
 - Take an array of sync objects (Dave Airlie)
v3:
 - Throw -EINVAL if pad != 0

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/syncobj: Add a syncobj_array_find helper

The wait ioctl has a bunch of code to read an syncobj handle array from
userspace and turn it into an array of syncobj pointers.  We're about to
add two new IOCTLs which will need to work with arrays of syncobj
handles so let's make some helpers.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/syncobj: Allow wait for submit and signal behavior (v5)

Vulkan VkFence semantics require that the application be able to perform
a CPU wait on work which may not yet have been submitted.  This is
perfectly safe because the CPU wait has a timeout which will get
triggered eventually if no work is ever submitted.  This behavior is
advantageous for multi-threaded workloads because, so long as all of the
threads agree on what fences to use up-front, you don't have the extra
cross-thread synchronization cost of thread A telling thread B that it
has submitted its dependent work and thread B is now free to wait.

Within a single process, this can be implemented in the userspace driver
by doing exactly the same kind of tracking the app would have to do
using posix condition variables or similar.  However, in order for this
to work cross-process (as is required by VK_KHR_external_fence), we need
to handle this in the kernel.

This commit adds a WAIT_FOR_SUBMIT flag to DRM_IOCTL_SYNCOBJ_WAIT which
instructs the IOCTL to wait for the syncobj to have a non-null fence and
then wait on the fence.  Combined with DRM_IOCTL_SYNCOBJ_RESET, you can
easily get the Vulkan behavior.

v2:
 - Fix a bug in the invalid syncobj error path
 - Unify the wait-all and wait-any cases
v3:
 - Unify the timeout == 0 case a bit with the timeout > 0 case
 - Use wait_event_interruptible_timeout
v4:
 - Use proxy fence
v5:
 - Revert to a combination of v2 and v3
 - Don't use proxy fences
 - Don't use wait_event_interruptible_timeout because it just adds an
   extra layer of callbacks

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/syncobj: Add a CREATE_SIGNALED flag

This requests that the driver create the sync object such that it
already has a signaled dma_fence attached.  Because we don't need
anything in particular (just something signaled), we use a dummy null
fence.  This is useful for Vulkan which has a similar flag that can be
passed to vkCreateFence.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/syncobj: Add a callback mechanism for replace_fence (v3)

It is useful in certain circumstances to know when the fence is replaced
in a syncobj.  Specifically, it may be useful to know when the fence
goes from NULL to something valid.  This does make syncobj_replace_fence
a little more expensive because it has to take a lock but, in the common
case where there is no callback list, it spends a very short amount of
time inside the lock.

v2:
 - Don't lock in drm_syncobj_fence_get.  We only really need to lock
   around fence_replace to make the callback work.
v3:
 - Fix the cb_list comment to make kbuild happy

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/syncobj: add sync obj wait interface. (v8)

This interface will allow sync object to be used to back
Vulkan fences. This API is pretty much the vulkan fence waiting
API, and I've ported the code from amdgpu.

v2: accept relative timeout, pass remaining time back
to userspace.
v3: return to absolute timeouts.
v4: absolute zero = poll,
    rewrite any/all code to have same operation for arrays
    return -EINVAL for 0 fences.
v4.1: fixup fences allocation check, use u64_to_user_ptr
v5: move to sec/nsec, and use timespec64 for calcs.
v6: use -ETIME and drop the out status flag. (-ETIME
is suggested by ickle, I can feel a shed painting)
v7: talked to Daniel/Arnd, use ktime and ns everywhere.
v8: be more careful in the timeout calculations
    use uint32_t for counter variables so we don't overflow
    graciously handle -ENOINT being returned from dma_fence_wait_timeout

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i915: Use drm_syncobj_fence_get

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)

The atomic exchange operation in drm_syncobj_replace_fence is sufficient
for the case where it races with itself.  However, if you have a race
between a replace_fence and dma_fence_get(syncobj->fence), you may end
up with the entire replace_fence happening between the point in time
where the one thread gets the syncobj->fence pointer and when it calls
dma_fence_get() on it.  If this happens, then the reference may be
dropped before we get a chance to get a new one.  The new helper uses
dma_fence_get_rcu_safe to get rid of the race.

This is also needed because it allows us to do a bit more than just get
a reference in drm_syncobj_fence_get should we wish to do so.

v2:
 - RCU isn't that scary
 - Call rcu_read_lock/unlock
 - Don't rename fence to _fence
 - Make the helper static inline

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/syncobj: Rename fence_get to find_fence

The function has far more in common with drm_syncobj_find than with
any in the get/put functions.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate

Currently the hikey dsi logic cannot generate accurate byte
clocks values for all pixel clock values. Thus if a mode clock
is selected that cannot match the calculated byte clock, the
device will boot with a blank screen.

This patch uses the new mode_valid callback (many thanks to
Jose Abreu for upstreaming it!) to ensure we don't select
modes we cannot generate.

Also, since the ade crtc code will adjust the mode in mode_set,
this patch also adds a mode_fixup callback which we use to make
sure we are validating the mode clock that will eventually be
used.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/vmwgfx: Bump the version for fence FD support

Minor version bump to indicate support for fence FD

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Add export fence to file descriptor support

Added code to link a fence to a out_fence_fd file descriptor and
thread out_fence_fd down to vmw_execbuf_copy_fence_user() so it can be
copied into the IOCTL reply and be passed back up the the user.

v2:
Make sure to sync and clean up in case of failure

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Add support for imported Fence File Descriptor

This allows vmwgfx to wait on a fence created by another
device.

v2:
* Remove special handling for vmwgfx fence and just use dma_fence_wait()
* Use interruptible waits
* Added function documentation

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Prepare to support fence fd

Make the fields and flags available.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Fix incorrect command header offset at restart

Sometimes it appears like the device modifies the command header offset
member. So explicitly clear it when restarting after an error.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Support the NOP_ERROR command

Can be used by user-space applications to test and verify the kernel
command buffer error recovery functionality.

Malicious user-space apps could potentially use this command to slow down
graphics processing somewhat, but they could also accomplish the same thing
using a random malformed command so this should be considered safe.
At least as safe as it gets.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Restart command buffers after errors

Previously we skipped the command buffer and added an extra fence to
avoid hangs due to skipped fence commands.
Now we instead restart the command buffer after the failing command,
if there are any commands left.
In addition we print out some information about the failing command
and its location in the command buffer.

Testing Done: ran glxgears using mesa modified to send the NOP_ERROR
command before each 10th clear and verified that we detected the device
error properly and that there were no other device errors caused by
incorrectly ordered command buffers. Also ran the piglit "quick" test
suite which generates a couple of device errors and verified that
they were handled as intended.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Move irq bottom half processing to threads

This gets rid of the irq bottom half tasklets and instead performs the
work needed in process context. We also convert irq-disabling spinlocks to
ordinary spinlocks.

This should decrease system latency for other system components, like
sound for example but has the potential to increase latency for processes
that wait on the GPU.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Don't use drm_irq_[un]install

We're not allowed to change the upstream version of the drm_irq_install
function to be able to incorporate threaded irqs. So roll our own irq
install- and uninstall functions instead of relying on the drm core ones.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/i915: Beef up of Beef up the IPS vs. CRC workaround

Commit 6e644626945c ("drm/i915: Beef up the IPS vs. CRC
workaround") was supposed to solve below bug. However, the
patch I tested is not the same as the one that got merged.
With this addition the test pass.

V2: removed unused: "struct intel_crtc *intel_crtc"

Fixes: 6e644626945c ("drm/i915: Beef up the IPS vs. CRC workaround")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101664
Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828121810.13112-1-marta.lofstedt@intel.com

drm/i915/bios: amend edp block based on intel_vbt_decode

Copy over some fields defined in the intel_vbt_decode tool. No
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a42f0e4d1bba2679e9cd78da1e31b66133d562f.1503670197.git.jani.nikula@intel.com

drm/i915/bios: amend child device flags based on intel_vbt_decode

Copy over some fields defined in the intel_vbt_decode tool. No
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bce6907fa24d80643b33d58091d7675ff3b4f30e.1503670197.git.jani.nikula@intel.com

drm/i915/bios: amend bdb_general_features

Copy over some fields defined in the intel_vbt_tool. No functional
changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/884cf56c019999a2c826da7e50a5fbf1aec5146b.1503670197.git.jani.nikula@intel.com

drm/i915/bios: split up iboost to hdmi and dp bitfields

This is according to the style all over the place. No functional
changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf5f0e5d10851db3796e632836d23551f59cc412.1503670197.git.jani.nikula@intel.com

drm/i915: Quietly cancel FBC activation if CRTC is turned off before worker

Since we use a worker to enable FBC on the CRTC, it is possible for the
CRTC to be switched off before we run. In this case, the CRTC will not
allow us to wait upon a vblank, so remove the DRM_ERROR as this is very
much expected.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102410
Fixes: ca18d51d77eb ("drm/i915/fbc: wait for a vblank instead of 50ms when enabling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170825150215.19236-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Fix FBC cfb stride programming for non X-tiled FB

When FBC is enabled for linear, legacy Y-tiled and Yf-tiled
surfaces on gen9, the cfb stride must be programmed by SW as

cfb_stride = ceiling[(at least plane width in pixels)/
     (32 * compression limit factor)] * 8

v2: Minor fix for a build error
v3: Fixed subject, register name and platform check (Ville)
v4: Added WA details in comment (Paulo)
v5:
 - Read modified reg write to preserve other bit values (Paulo)
 - Store modified stride value in reg_params (Paulo)
 - Keep GLK out of the WA (Paulo)
v6:
 - added additional field in reg_params for gen9_wa_cfb_stride (Paulo)
 - Used appropriate bit mask while writing the register (Paulo)
v7 (from Paulo):
 - Fix coding style and spacing issues.
 - Mask the old values before writing.
 - Bikeshed comments and unnecessary checks.

Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502389833-32621-1-git-send-email-praveen.paneri@intel.com

drm/i915/cnl: don't hardcode DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT

We have the macro, use it. Makes the code a little easier to
understand.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170825194004.26571-1-paulo.r.zanoni@intel.com

drm/i915/bios: drop the rest of the p_ prefixes from pointers

Not really kernel style, and sticks out like a sore thumb. No functional
changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/76b4f643e727bae39acd6f73d085f718eb012235.1503600621.git.jani.nikula@intel.com

drm/i915/bios: throw away unused DVO_* macros

Apparently meant to be additional DEVICE_PORT_* or DVO_PORT_* macros,
but left unused at some point. Remove. No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/76a1b91bfe05e9e1c04d921b9c4364461f754905.1503600621.git.jani.nikula@intel.com

drm/i915/bios: group device type definitions together

No idea why some definitions were defined at a different place from the
rest. Move them together. No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6433a24240ef965f9c032e8f66fcce0ea33277ef.1503600621.git.jani.nikula@intel.com

drm/i915/bios: document child device config dvo_port values a bit better

Move closer to child device config struct while at it. No functional
changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/abbad7b4a3f0c35d48844cc0950af3606e9a3142.1503600621.git.jani.nikula@intel.com

drm/i915/bios: throw away struct old_child_dev_config

The old_child_dev_config struct is no longer needed except for its size;
replace with a macro. No functional change.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4bfa6e45fecd33af797ec218635504ec8a09f788.1503600621.git.jani.nikula@intel.com

drm/i915/bios: throw away high level child device union

All the child device config fields, including legacy, are now available
in the same struct, so use it for everything.

As this change touches plenty of code with "p_child", rename them to
"child" while at it. Also do some simple unification and constification
where not intrusive. This in the name of avoiding extra cleanup churn
for the same lines as here.

No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/103300a9ae8629624619fc8df2c533e745cc5a78.1503600621.git.jani.nikula@intel.com

drm/i915/bios: add legacy contents to common child device config

Add legacy contents to common child device config, in preparation for
using a single child device config. Use unions where BDB versions of the
config differ. Use the naming from old_child_dev_config for legacy
fields.

No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b606456da4d52f1aedf383aab4275d81013d3178.1503600621.git.jani.nikula@intel.com

drm/i915/bios: remove the raw version of child device config

Convert the only user of the raw field, switching to the recently added
struct fields. No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/83e6a2058553a43e0d08a49df1f86821f38b206b.1503600621.git.jani.nikula@intel.com