[PATCH] powerpc/PCI hotplug: remove remove_bus_device()

The function rpaphp_eeh_remove_bus_device() is a dupe of
eeh_remove_bus_device(). Remove it.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] powerpc/PCI hotplug: merge config_pci_adapter

Remove general baroqueness.  The function rpaphp_config_pci_adapter()
is really just one line of code, once all the dbg printks are removed.
And its called in only one place. So replace the call by the one line.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] powerpc/PCI hotplug: remove rpaphp_fixup_new_pci_devices()

The function rpaphp_fixup_new_pci_devices() has been migrated to
pcibios_fixup_new_pci_devices() in
arch/powerpc/platforms/pseries/pci_dlpar.c
This patch removes the old version.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] powerpc/PCI hotplug: remove rpaphp_find_bus()

The function rpaphp_find_pci_bus() has been migrated to
pcibios_find_pci_bus() in arch/powerpc/platforms/pseries/pci_dlpar.c
This patch removes the old version.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug: shpchp: AMD POGO errata fix

This patch fixes the AMD POGO errata on the hotplug controller where the
platform will lock up or reboot if PERR/SERR generation is enabled and a
slot is sent an enable command.  This fix disables PERR/SERR generation
before a slot is sent the enable command by first saving related
registers, turning off SERR/PERR generation, enabling the slot, then
restoring the registers.

Signed-off-by: David Keck <david.keck@amd.com>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug: PCI panic on dlpar add (add pci slot to running partition)

Removing and then adding a PCI slot to a running partition results in
a kernel panic. The current code attempts to add iospace for an entire
root bus, which is inappropriate, and silently fails.  When a pci device
tries to use the iospace, a page fault is taken, as the iospace had not
been mapped, and of course the page fault cannot be resolved.

This only occurs for PCI adapters using pio, which may be why it hadn't
been seen earlier (this seems to have been broken for a while).
This patch has survived testing of dozens of slot add and removes.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug/powerpc: module build break

The RPAPHP hoplug driver will not build as a module, because it calls
on pci_claim_resource(), which is not exported. This exports the symbol.
Problem reported by Olaf Hering <olh@suse.de>

A grep indicates that building drivers/parisc/lba_pci.c
would have trouble building as a module for the same reason.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: pci_ids: remove duplicates gathered during merge period

pci_ids.h: remove duplicates.  Compile tested allmodconfig.

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: restore 2 missing pci ids

Somewhere between 2.6.14 and 2.6.15-rc3, some PCI ids were apparently
removed.  The ecc.c module, which is not a part of the kernel.org tree, but
included in some distributions, fails to compile.

Signed-off-by: Mark Rustad <mrustad@mac.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug: fix up Kconfig help text

Remove reference to pcihpfs that no longer exists.

Signed-off-by: Pavel Machek <pavel@suse.cz>

[PATCH] PCI Hotplug: fix up coding style issues

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: make it easier to see that set_msi_affinity() is used

I missed this usage in drivers/pci/msi.h:

#ifdef CONFIG_SMP
#define set_msi_irq_affinity    set_msi_affinity
#else
#define set_msi_irq_affinity    NULL
#endif

set_msi_affinity() is declared and exclusively used in msi.c.
Here's a better way so (hopefully) history doesn't repeat itself.

Signed-off-by: Grant Grundler <iod00d@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: drivers/pci/pci.c: #if 0 pci_find_ext_capability()

This patch #if 0's the unused global function pci_find_ext_capability().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: irq and pci_ids: patch for Intel ICH8

This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files.

Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] pci: Schedule removal of pci_module_init

Scheduled the removal of pci_module_init.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: schedule PCI_LEGACY_PROC for removal

PCI_LEGACY_PROC is deprecated since 2.5.53 in favor of lspci(8).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] "Fix uidhash_lock <-> RXU deadlock" fix

I get storms of warnings from local_bh_enable().  Better-tested patches,
please.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/davej/x86

Merge /pub/scm/linux/kernel/git/davej/agpgart

Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

Merge /pub/scm/linux/kernel/git/davej/cpufreq

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6

Fix ipv4/igmp.c compile with gcc-4 and IP_MULTICAST

Modern versions of gcc do not like case statements at the end of a block
statement: you need at least an empty statement.  Using just a "break;"
is preferred for visual style.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[SCSI] ServeRAID: prevent seeing DADSI devices

A critical thing the ServeRAID driver MUST do is hide the physical DASDI
devices from the OS. It does this by intercepting the INQUIRY commands.

In recent 2.6.15 testing, I discovered this to be failing.

The cause was the driver assuming that the INQUIRY response data was in a
simple single buffer, when it was actually a 1 element scatter gather list.

This patch makes ips always look at the correct data when examining an
INQUIRY response.

Signed-off-by: Jack Hammer <jack_hammer@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: add message sanity check

This adds a sanity check in the interrupt routine
insures incoming message frames are a valid
message frames.

The code for setting 0xdeadbeaf in the freed message
frames, apparently was already submitted by Christoph
in previous patch submission.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: unloading the driver - only set asyn narrow for configured devices

This patch inhibits sending spi negotiation parameters
for non-configured devices from the slave_destroy function.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: unloading the driver results in panic - fix

The ioc->alt_ioc->alt_ioc pointer is not getting cleared
during driver unload time.   This dangling pointer
can result in panic in certain circumstances, such
as error recovery, or firmware download in flashless
environments. This only impacts dual functions controllers,
such as 1030. Please apply.

This patch also includes a small cosmetic name change
for mpt_spi_log_info.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] mptsas: don't complain on bogus slave_alloc calls

When people use the userspace scanning facilities on SAS hardware the
LLDD gets bogus slave_alloc calls.  Just fail those gracefully instead
of printing a warning in mptsas and another one in the midlayer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: add task managment response code info

Adding verbose message returned from firmware
when a task mangment request fails.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: add MSI support

On Mon, Jan 16, 2006 at 06:53:24PM -0700, Moore, Eric wrote:
> Adding MSI support, and command line for enabling
> it.  By default, the command line option has MSI disabled.

mpt_msi_enable is initialized to 0 implicitly, no need to do that.  Also
replace if (mpt_msi_enable == 1) tests with just if (mpt_msi_enable).

Updated patch below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: overrun tape fix

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: add verbose messages for RAID actions

A customer request to send raid asyn actions
from firmware to the event syslog.  This shows
when raid volumes go degraded, or complete resync,
or volumes created/deleted, etc.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytes

Increasing the reply frame size by 16 bytes, to
be in sync with the other fusion drivers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spi

On Mon, Jan 16, 2006 at 06:53:13PM -0700, Moore, Eric wrote:
> The task managment request timeout in the eh threads was set
> for U320 timing, which is between 2-5 seconds.
> This is too small for FC and SAS.
> According to the firmware engineers, Fibre needs to be 40 seconds
> and SAS needs to be 10 seconds.

The timeout selection should probably be done in a little helper instead
of duplicated in a few places.  Updated patch below.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: mptsas, increase discovery timout to 300 seconds

Increase the port enable timeout only for SAS from 30 to 300 seconds.
A customer request for the handling large topologies.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: spi bus reset when driver loads

This patch is for spi.  This issues bus reset when driver
loads. Handling cases when initator has negotiated for packetized,
and target negotiated for non-packetized; effectly this bus reset
is getting both target and initiator on the same sheet of music.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: Fix timer handling

Fix the timer handling in aic79xx to use the SCSI-ML provided handling
instead of implementing our own.
It also fixes a deadlock in the command recovery code.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic7xxx: update documentation

This patch updates the documentation for aic7xxx and aic79xx with fixes
from the adaptec driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: SLOWCRC fix

This patch introduces the SLOWCRC handling for certain buggy chipsets.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: sequencer fixes

This patch updates the aic79xx sequencer with latest fixes from adaptec.
The sequencer code now corresponds with adaptec version 2.0.15.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic7xxx: Update aicasm

This patchset updates aicasm code with the latest fixes from adaptec.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: fix compile

The prior fusion patches moved an invocation of a function,
mptscsih_TMHandler(), static to mptscsih.c into mptsas.c

Make the function unstatic, move the header to mptscsih.h and export it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: bump version

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: FC rport code fixes

This fix's problems with recent fc submission regarding
i/o being redirected to the wrong target.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: move sas persistent event handling over to the mptsas module

This moves code intented for SAS from
the generic mptscsih module over to the
mptsas module.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: target reset when drive is being removed

The issuing of the target reset
used in device hot removal case so the
firmware queue is flushed out off outstanding
commands.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion: add support for raid hot add/del support

RAID event support.

This will hot add and remove raid volumes
when managment application creates and
deletes the volumes.  The driver is basically
responding to firmware asyn events, and reporting
the changes to the above layers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] scsi_transport_sas.c: display port identifier

This patch displays the port identifier on
the folder attribute; located in the middle digit.

/sys/class/sas_rphy/rphy-%x:%x:%x

The port identifier is basically the unique identifier
for each sas domain.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Merge master.kernel.org:/home/rmk/linux-2.6-serial

Merge master.kernel.org:/home/rmk/linux-2.6-arm

[PATCH] rcu_torture_lock deadlock fix

rcu_torture_lock is used in a softirq-unsafe manner, but it is also
taken by rcu_torture_cb(), which may execute in softirq-context,
resulting in potential deadlocks.

The fix is to acquire rcu_torture_lock in a softirq-safe manner.  With
this fix applied, the rcu-torture code passes validation.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix deadlock in drivers/pci/msi.c

The lock validator caught another one: drivers/pci/msi.c is accessing
&irq_desc[i].lock with interrupts enabled (!).

The fix is to disable interrupts properly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix uidhash_lock <-> RCU deadlock

RCU task-struct freeing can call free_uid(), which is taking
uidhash_lock - while other users of uidhash_lock are softirq-unsafe.

The fix is to always take the uidhash_spinlock in a softirq-safe manner.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

[PATCH] Fix boot-time slowdown for measure_migration_cost

This reduces the amount of time the migration cost calculations cost
during bootup. Based on numbers by Tony Luck <tony.luck@intel.com>.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

Don't try to "validate" a non-existing timeval.

settime() with a NULL timeval is silly but legal.

Noticed by Dave Jones <davej@redhat.com>

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Clarify help text of SKGE/SK98LIN/SKY2

Some users have commented that it is unclear which driver they should be
using for their Marvell/SysKonnect network adapter, and which ones
are/aren't interchangable.

This patch attempts to reduce the confusion.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6

[BLOCK] A few kerneldoc fixups

Signed-off-by: Jens Axboe <axboe@suse.de>

[TCP] H-TCP: Fix accounting

This fixes the accounting in H-TCP, the ccount variable is also
adjusted a few lines above this one.

This line was not supposed to be there and wasn't there in the patches
originally submitted, the four patches submitted were merged to one
and in that merge the bug was introduced.

Signed-Off-By: Baruch Even <baruch@ev-en.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4] igmp: remove pointless printk

This is easily triggerable by sending bogus packets,
allowing a malicious user to flood remote logs.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: Fix compile failures in math-emu.

Kill debugging default switch cases in do_one_mathemu().
That case is handled properly already and gcc hates
the empty statement that results when the debug code is
disabled.

Pointed out by kaffe.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: heartbeats exceed maximum retransmssion limit

The number of HEARTBEAT chunks that an association may transmit is
limited by Association.Max.Retrans count; however, the code allows
us to send one extra heartbeat.

This patch limits the number of heartbeats to the maximum count.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: correct the number of INIT retransmissions

We currently count the initial INIT/COOKIE_ECHO chunk toward the
retransmit count and thus sends a total of sctp_max_retrans_init chunks.
The correct behavior is to retransmit the chunk sctp_max_retrans_init in
addition to sending the original.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] PCMCIA=m, HOSTAP_CS=y is not a legal configuration

CONFIG_PCMCIA=m, CONFIG_HOSTAP_CS=y doesn't compile.

Reported by "Gabriel C." <crazy@pimpmylinux.org>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] Typo corrections for ieee80211

This patch, generated against 2.6.16-rc1-git4, corrects two typographical
errors in ieee80211_rx.c and adds the facility name to a bare printk.

Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] ipw2200: Fix a variable referenced after kfree() bug

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] ipw2200: Fix sw_reset doesn't clear the static essid problem

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] ipw2200: Fix "iwspy ethx off" causes kernel panic

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] ipw2100: Fix setting txpower failed problem

The ipw2100 driver misunderstood the parameter of txpower.
Tx Power off means turn off the radio, but the driver interpret it as
"can't set txpower". So when getting the txpower, it sets disabled=1 to
the iwconifg tool in managed mode. And the tool will display "Tx Power off"
when disabled=1.

Now, in managed mode, iwconfig will not show "TX Power" if the radio is not
switched off. It will only display "Tx Power off" only if the radio is killed.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] ipw2100: Fix a gcc compile warning

drivers/net/wireless/ipw2100.c:2236: warning: `ipw2100_match_buf' defined
but not used

Cc: Yi Zhu <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[LIBATA] Blacklist certain Maxtor firmware revisions for FUA support

It looks like they are either discarding or corrupting data when the FUA
command is used, bad.

Signed-off-by: Jens Axboe <axboe@suse.de>

[SPARC64]: Kill compat_sys_clock_settime sign extension stub.

It's wrong and totally unneeded.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SCSI] megaraid_sas: new template defined to represent each type of controllers

This patch defines a new template to represent each type of
controllers (identified by the processor used). The template has
members that is set with appropriate values during driver
initialisation. This change is done to support new controllers with
minimal change to existing code. In future, for a new controller
support, a template will be declared and its members initialised
appropriately.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] megaraid_sas: cleanup queue command path

This patch (originally submitted by Christoph Hellwig) removes code
duplication in megasas_build_cmd.  It also defines
MEGASAS_IOC_FIRMWARE32 to allow 64 bit compiled applications to work.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6

[ARM] 3289/1: Enable the LCD support for Integrator/CP

Patch from Catalin Marinas

The LCD displays were no longer working with Integrator/CP after some
changes to the setup code. This patch re-enables them.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[PATCH] ieee80211: Fix A band min and max channel definitions

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] ieee80211: Fix iwlist scan can only show about 20 APs

Limit the amount of output given to iwlist scan.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] ieee80211: Fix problem with not decrypting broadcast packets

The code for pulling the key to use for decrypt was correctly using
the host_mc_decrypt flag.  The code that actually decrypted,
however, was based on host_decrypt.  This patch changes this
behavior.

Signed-off-by: Etay Bogner <etay.bogner@gmail.com>
Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[PATCH] orinoco_cs: tweak Vcc debugging messages

The current orinoco_cs.c can issue the exact same error message for
2 different tests that can fail.  Alter them so we can tell which
one of the two failed.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[CPUFREQ] Get rid of userspace policy struct, make userspace gov _PPC safe.

Userspace governor need not to hold it's own cpufreq_policy,
better make use of the global core policy.
Also fixes a bug in case of frequency changes via _PPC.
Old min/max values have wrongly been passed to __cpufreq_driver_target()
(kind of buffered) and when max freq was available again, only the old
max(normally lowest freq) was still active.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
 cpufreq_userspace.c |   53 +++++++++++++++++++++++++++-------------------------
 1 files changed, 28 insertions(+), 25 deletions(-)

[PATCH] mv643xx_eth: Fix for building as a module

Enable mv643xx_eth driver to work when built as a module on
mv64x60-based embedded systems.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] mv643xx_eth: Whitespace cleanup

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] mv643xx_eth: Update dev->last_rx on packet receive

Update dev->last_rx on packet receive

This fix corrects errors seen during configuration of the bonding driver.

Signed-off-by: Paolo Galtieri <pgaltieri@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] mv643xx_eth: Fix spinlock recursion bug

This patch eliminates a spinlock recursion bug introduced recently.
Since eth_port_send() is always called with the lock held, we simply
remove the locking inside the function itself.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[X86] Add new Intel cache descriptors.

From http://www.intel.com/design/xeon/applnots/24161830.pdf

16MB of 16-way assoc 64 byte per cacheline L3 cache anyone? Yum.

Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] s2io: scatter-gather fix

There is a problem with fragmented skb in s2io driver version 2.0.9.4
available in 2.6.16-rc1 kernel. The adapter will fail to transmit if
any scatter-gather skb arrives.  This patch provides fix for the above
described problem.

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] b44: fix laptop carrier detect

On my laptop, the b44 device is created and the carrier state defaults
to ON when created by alloc_etherdev. This means tools like NetworkManager
see the carrier as On and try and bring the device up.  The correct thing
to do is mark the carrier as Off when device is created.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] acenic: fix checking of read_eeprom_byte() return values

tmp in ace_init is u32 thus rendering read_eeprom_byte() return values
checks useless.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] bonding: fix ->get_settings error checking

Since get_settings() returns a signed int and it gets checked
for < 0 to catch an error, res should be a signed int too.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[IA64-SGI] Add PROM feature set for device flush list

Introduce PRF_DEVICE_FLUSH_LIST flag for older PROMs.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[SCSI] Prevent scsi_execute_async from guessing cdb length

When the scsi_execute_async interface was added it ended up reducing
the flexibility of userspace to send arbitrary scsi commands through
sg using SG_IO. The SG_IO interface allows userspace to specify the
CDB length. This is now ignored in scsi_execute_async and it is
guessed using the COMMAND_SIZE macro, which is not always correct,
particularly for vendor specific commands. This patch adds a cmd_len
parameter to the scsi_execute_async interface to allow the caller
to specify the length of the CDB.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[CPUFREQ] _PPC frequency change issues

BIOS might change frequency behind our back when BIOS changes allowed
frequencies via _PPC.  In this case cpufreq core got out of sync.
Ask driver for current freq and notify governors about a change

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] p4-clockmod: Workaround for CPU's with N60 errata

Ignore clock frequencies below 2Ghz for CPU's detected with N60 errata bug.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[ARM] 3269/1: Add ARMv6 MT_NONSHARED_DEVICE mem_types[] index

Patch from George G. Davis

This Freescale Semiconductor, Inc. contributed patch adds mem_types[]
support for ARMv6 non-shared device memory region attributes. This
implementation provides support for only first level section mapped
non-shared devices. Second level non-shared device mappings are not
yet supported.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>