Kristen Carlson Accardi [Thu, 12 Jun 2014 15:35:48 +0000 (08:35 -0700)]
drm/i915: make sure PC8 is enabled on suspend and disabled on resume v4
This matches the runtime suspend paths and allows the system to enter
the lowest power mode at freeze time.
v2: move disable_pc8 call to thaw_early (Imre)
move enable_pc8 to freeze_late (Imre/Jesse)
v3: drop spurious hunk from _freeze now that we have freeze_late (Jesse)
v4: move back to suspend_late (Imre was right)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Thu, 12 Jun 2014 15:35:47 +0000 (08:35 -0700)]
drm/i915: send proper opregion notifications on suspend/resume
This indicates to the firmware that it can power down various other
components or bring them back up, depending on the target system state.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 12 Jun 2014 15:48:52 +0000 (17:48 +0200)]
drm/i915: Unifiy GT powersave suspend logic
Jesse's patch to only quiescent our rps work and Imre's fix to address
a race with runtime pm and the forcewake reference held by the used
diverging means to address the same bug: Jesse's patch uses
flush_delayed_work while (since we want to make sure rps is set up)
while Imre's used a cancel+manuel refcount adjustment.
Unify them again by simply reusing intel_suspend_gt_powersave in
intel_disable_gt_powersave.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Thu, 12 Jun 2014 15:35:45 +0000 (08:35 -0700)]
drm/i915: leave rc6 enabled at suspend time v4
This allows the system to enter the lowest power mode during system freeze.
v2: delete force wake timer at suspend (Imre)
v3: add GT work suspend function (Imre)
v4: use uncore forcewake reset (Daniel)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Kristen Carlson Accardi [Thu, 12 Jun 2014 15:35:44 +0000 (08:35 -0700)]
drm/i915: disable power wells on suspend
We want to make sure everything is disabled and at its lowest power when
freezing.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 12 Jun 2014 15:46:02 +0000 (17:46 +0200)]
Merge commit '
e81a0e771c10de86fdb52c6baf534ff5fdeec72c' into topic/soix
Need to have a baseline of drm-next + acpi-next to merge new cool SOix
features for 3.17. No conflicts, so won't cause trouble.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Wed, 11 Jun 2014 06:28:10 +0000 (16:28 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
display rework fixes lots of displayport issues.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (43 commits)
drm/nouveau/disp/dp: fix tmds passthrough on dp connector
drm/nouveau/dp: probe dpcd to determine connectedness
drm/nv50-: trigger update after all connectors disabled
drm/nv50-: prepare for attaching a SOR to multiple heads
drm/gf119-/disp: fix debug output on update failure
drm/nouveau/disp/dp: make use of postcursor when its available
drm/g94-/disp/dp: take max pullup value across all lanes
drm/nouveau/bios/dp: parse lane postcursor data
drm/nouveau/dp: fix support for dpms
drm/nouveau: register a drm_dp_aux channel for each dp connector
drm/g94-/disp: add method to power-off dp lanes
drm/nouveau/disp/dp: maintain link in response to hpd signal
drm/g94-/disp: bash and wait for something after changing lane power regs
drm/nouveau/disp/dp: split link config/power into two steps
drm/nv50/disp: train PIOR-attached DP from second supervisor
drm/nouveau/disp/dp: make use of existing output data for link training
drm/gf119/disp: start removing direct vbios parsing from supervisor
drm/nv50/disp: start removing direct vbios parsing from supervisor
drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
drm/nouveau/disp/dp: create subclass for dp outputs
...
Ben Skeggs [Wed, 11 Jun 2014 03:06:48 +0000 (13:06 +1000)]
drm/nouveau/disp/dp: fix tmds passthrough on dp connector
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 6 Jun 2014 08:09:55 +0000 (18:09 +1000)]
drm/nouveau/dp: probe dpcd to determine connectedness
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 5 Jun 2014 02:56:35 +0000 (12:56 +1000)]
drm/nv50-: trigger update after all connectors disabled
We were sending the necessary state changes to unset the mode, but
never actually hit the big GO button unless another modeset happens
afterwards.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 5 Jun 2014 00:59:55 +0000 (10:59 +1000)]
drm/nv50-: prepare for attaching a SOR to multiple heads
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 4 Jun 2014 01:43:50 +0000 (11:43 +1000)]
drm/gf119-/disp: fix debug output on update failure
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 3 Jun 2014 04:48:18 +0000 (14:48 +1000)]
drm/nouveau/disp/dp: make use of postcursor when its available
And at the same time, obey the spec better wrt out-of-range requests.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 3 Jun 2014 02:56:18 +0000 (12:56 +1000)]
drm/g94-/disp/dp: take max pullup value across all lanes
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 3 Jun 2014 02:47:31 +0000 (12:47 +1000)]
drm/nouveau/bios/dp: parse lane postcursor data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 30 May 2014 15:48:06 +0000 (01:48 +1000)]
drm/nouveau/dp: fix support for dpms
SOR_PWR has no effect to power-off DP links, unlike other SOR protocols.
Instead, on the source side, we cut power to the lanes after having put
the sink into D3. Link training takes care of everything required to
bring it back again.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 30 May 2014 06:20:58 +0000 (16:20 +1000)]
drm/nouveau: register a drm_dp_aux channel for each dp connector
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 26 May 2014 02:09:06 +0000 (12:09 +1000)]
drm/g94-/disp: add method to power-off dp lanes
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 20 May 2014 00:18:03 +0000 (10:18 +1000)]
drm/nouveau/disp/dp: maintain link in response to hpd signal
This previously worked for the most part due to userspace doing a
modeset in response to HPD interrupts. This will allow us to
properly handle cases where sync is lost for other reasons, or if
userspace isn't caring.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 26 May 2014 02:00:07 +0000 (12:00 +1000)]
drm/g94-/disp: bash and wait for something after changing lane power regs
Some kind of update? Needed to make the power-down take effect at least.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 26 May 2014 01:57:57 +0000 (11:57 +1000)]
drm/nouveau/disp/dp: split link config/power into two steps
We want to be able to power down the lanes for DPMS off.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 27 May 2014 05:00:36 +0000 (15:00 +1000)]
drm/nv50/disp: train PIOR-attached DP from second supervisor
Same place as for SOR, between detach and attach phases.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 19 May 2014 04:06:07 +0000 (14:06 +1000)]
drm/nouveau/disp/dp: make use of existing output data for link training
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 21 May 2014 01:39:07 +0000 (11:39 +1000)]
drm/gf119/disp: start removing direct vbios parsing from supervisor
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 21 May 2014 01:24:43 +0000 (11:24 +1000)]
drm/nv50/disp: start removing direct vbios parsing from supervisor
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 19 May 2014 01:54:09 +0000 (11:54 +1000)]
drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 17 May 2014 01:19:54 +0000 (11:19 +1000)]
drm/nouveau/disp/dp: create subclass for dp outputs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 30 May 2014 02:49:17 +0000 (12:49 +1000)]
drm/nouveau: use connector events for HPD instead of GPIO watching
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 16 May 2014 04:36:15 +0000 (14:36 +1000)]
drm/nouveau/disp: add internal representaion of output paths and connectors
This will, at some point, be used to replace various bits and pieces of
code doing direct bios parsing. For now, it'll just be used for some
DP improvements.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 May 2014 01:10:02 +0000 (11:10 +1000)]
drm/nouveau/bios: extend connector table parsing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 May 2014 00:26:02 +0000 (10:26 +1000)]
drm/nouveau/disp: nothing to see here
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 11 Jun 2014 00:28:18 +0000 (10:28 +1000)]
drm/nouveau/i2c/anx9805: add debugging to aux transactions
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 29 May 2014 01:35:10 +0000 (11:35 +1000)]
drm/nouveau/i2c: introduce locking at a per-port level
There's also provisions to allow a pad to be locked with a specific
routing, for an indefinite period of time. This will be used in
future patches.
The G94+ pad driver will now also power-down pads when not required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 29 May 2014 01:07:16 +0000 (11:07 +1000)]
drm/nouveau/i2c: balance port acquire/release
This was a half-finished hack before, just enough to handle the shared
aux/i2c pad thing on G94 and up.
We got lucky with locking etc up until now, as this was (generally) all
protected by the DRM mode_config lock. It's about to become a lot more
likely to hit the races.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 04:53:34 +0000 (14:53 +1000)]
drm/gk104/i2c: add aux channel interrupt driver
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 04:50:25 +0000 (14:50 +1000)]
drm/g94/i2c: add aux channel interrupt driver
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 04:47:36 +0000 (14:47 +1000)]
drm/nouveau/i2c: add interfaces to support handling aux channel interrupts
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 03:59:26 +0000 (13:59 +1000)]
drm/nouveau/i2c: start hiding subdev-internal interfaces
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 7 May 2014 02:41:29 +0000 (12:41 +1000)]
drm/nouveau/i2c: remove unnecessary i2c_set_adapdata()
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 7 May 2014 05:13:45 +0000 (15:13 +1000)]
drm/nouveau/i2c: properly hand aux reply back to caller, and only retry on defer
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 04:36:49 +0000 (14:36 +1000)]
drm/nv50-/mc: also pass PMGR interrupts onto I2C subdev
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 05:54:17 +0000 (15:54 +1000)]
drm/nouveau/gpio: send separate event types for high/low transitions
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 00:33:23 +0000 (10:33 +1000)]
drm/nouveau/gpio: use base constructor for all implementations
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 00:17:35 +0000 (10:17 +1000)]
drm/nouveau/gpio: move on-reset intr disable-and-ack to common code
Re-uses the implementation's accessor functions rather than requiring
and init/fini implementation for each chipset.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 12 May 2014 06:14:11 +0000 (16:14 +1000)]
drm/nouveau/gpio: split "toggled" interrupt into "went high" / "went low"
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 12 May 2014 05:22:42 +0000 (15:22 +1000)]
drm/nouveau/gpio: split g92 class from nv50
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 12 May 2014 04:18:06 +0000 (14:18 +1000)]
drm/nouveau/gpio: use indirect pointer to base class definition
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 16 May 2014 00:49:28 +0000 (10:49 +1000)]
drm/nouveau/disp/dp: support training to highest rate, rather than a target
We really want this for, at least, MST devices.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 15 May 2014 12:20:40 +0000 (22:20 +1000)]
drm/nouveau/disp/dp: support postcursor in link training
Not enabled at the backends yet, but will read status and send back max
reached at level 0.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 May 2014 05:30:15 +0000 (15:30 +1000)]
drm/nouveau/core: allow event source to handle multiple event types per index
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Wed, 11 Jun 2014 00:13:58 +0000 (10:13 +1000)]
Merge branch 'topic/ipu-destaging' of git://git.pengutronix.de/git/pza/linux into drm-next
Destage IPUv3
* 'topic/ipu-destaging' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Register the CSI modules
gpu: ipu-v3: Add CSI and SMFC module enable wrappers
gpu: ipu-v3: Add ipu_idmac_get_current_buffer function
gpu: ipu-v3: Add SMFC code
gpu: ipu-v3: Move i.MX IPUv3 core driver out of staging
Dave Airlie [Tue, 10 Jun 2014 06:39:21 +0000 (16:39 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
There's really not a great deal this time due to me spending most of this window on Maxwell. But, here's the random bits and pieces that's currently queued.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (25 commits)
drm/gk208/gr: add missing registers to grctx init
drm/nouveau/kms/nv04-nv40: fix pageflip events via special case.
drm/nv50-/mc: fix kms pageflip events by reordering irq handling order.
drm/nouveau/disp/nv04-nv40: abort scanoutpos query on vga analog.
drm/nv50-/kms: wait for enough ring space in crtc_prepare()
drm/nouveau/disp/dp: support training pattern 3
drm/nouveau/disp/dp: support aux read interval during link training
drm/gk104/gpio: fix incorrect interrupt register usage
drm/nouveau/core: punt all object state change messages to trace level
drm/nouveau/clk: allow end-user reclocking for nv40, nvaa, and nve0 clock types
drm/nouveau/fb: default NvMemExec to on, turning it off is used for debugging only
drm/nouveau/bios: fix a potential NULL deref in the PROM shadowing function
drm/nouveau/i2c: bump the i2c delay for the adt7473
drm/nouveau/therm/fan/tach: default to 2 pulses per revolution
drm/nvf0/device: enable video decoding engines on gk110/gk208
drm/nvf1/device: add support for 0xf1 (gk110b)
drm/nouveau/device: support for probing GK20A
drm/nouveau/graph: add GK20A support
drm/nouveau/graph: pad firmware code at load time
drm/nouveau/graph: enable when using external fw
...
Ilia Mirkin [Sat, 7 Jun 2014 19:39:45 +0000 (15:39 -0400)]
drm/gk208/gr: add missing registers to grctx init
This fixes hangs on GK208 which happen instantaneously on trying to use a
geometry shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org # v3.14+
Mario Kleiner [Mon, 12 May 2014 22:42:08 +0000 (00:42 +0200)]
drm/nouveau/kms/nv04-nv40: fix pageflip events via special case.
Cards with nv04 display engine can't reliably use vblank
counts and timestamps computed via drm_handle_vblank(), as
the function gets invoked after sending the pageflip events.
Fix this by defaulting to the old crtcid = -1 fallback path
on <= NV-50 cards, and only using the precise path on NV-50
and later.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: <stable@vger.kernel.org> # 3.13+
Mario Kleiner [Wed, 19 Mar 2014 07:12:51 +0000 (08:12 +0100)]
drm/nv50-/mc: fix kms pageflip events by reordering irq handling order.
Whenever a single nouveau_mc_intr() main gpu irq-handler invocation was
responsible for calling both, the vblank-irq handler (display engine irq)
and kms-pageflip completion handler (from fifo irq), the order of
invocation was wrong. nouveau_finish_flip() was called before
drm_handle_vblank() for the vblank of pageflip completion, so the
emitted pageflip event contained stale vblank count and timestamp
from previous vblank. This caused failure in userspace to timestamp
properly.
Reorder order of invocation of engine irq handlers: Put
NVDEV_ENGINE_DISP always on top, and thereby before NVDEV_ENGINE_FIFO,
so that drm_handle_vblank() gets called to update vblank timestamps
and count before potential pageflip events make use of that
information.
This works on nv-50 and later, where kms-pageflip completion triggers
an irq either after a separate vblank irq, or both pageflip and vblank
trigger one common irq invocation, but never before vblank irqs.
v2 (Ben):
- removed mods for nv04-nv40, it doesn't help there anyway
- this is considered a hack, and a better solution should be found
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: <stable@vger.kernel.org> # 3.13+
Mario Kleiner [Wed, 28 May 2014 03:22:18 +0000 (05:22 +0200)]
drm/nouveau/disp/nv04-nv40: abort scanoutpos query on vga analog.
nv04_disp_scanoutpos() must abort to trigger simple timestamping
fallback if vtotal/htotal regs return zero. This happens if the
output isn't a digital output, but a vga analog output, as the
regs don't get initialized in that case.
Fixes timestamping failure on nv-40 and earlier with vga output.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: <stable@vger.kernel.org> # 3.14+
Ben Skeggs [Mon, 19 May 2014 04:54:33 +0000 (14:54 +1000)]
drm/nv50-/kms: wait for enough ring space in crtc_prepare()
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 15 May 2014 12:00:06 +0000 (22:00 +1000)]
drm/nouveau/disp/dp: support training pattern 3
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 15 May 2014 11:50:07 +0000 (21:50 +1000)]
drm/nouveau/disp/dp: support aux read interval during link training
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 12 May 2014 04:12:32 +0000 (14:12 +1000)]
drm/gk104/gpio: fix incorrect interrupt register usage
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 16 May 2014 03:52:19 +0000 (13:52 +1000)]
drm/nouveau/core: punt all object state change messages to trace level
Leave debug for the more interesting bits of info.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Sun, 18 May 2014 05:04:16 +0000 (01:04 -0400)]
drm/nouveau/clk: allow end-user reclocking for nv40, nvaa, and nve0 clock types
Use with caution.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Sun, 18 May 2014 05:04:15 +0000 (01:04 -0400)]
drm/nouveau/fb: default NvMemExec to on, turning it off is used for debugging only
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Thu, 3 Apr 2014 20:12:41 +0000 (22:12 +0200)]
drm/nouveau/bios: fix a potential NULL deref in the PROM shadowing function
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 25 May 2014 22:42:13 +0000 (00:42 +0200)]
drm/nouveau/i2c: bump the i2c delay for the adt7473
Some adt7473 can't manage the 20µs delay we use for the bitbanging, bumping
it to 40µs seem to do the trick.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Tested-by: Marcel Dopita <mdop@seznam.cz>
Martin Peres [Mon, 12 May 2014 21:19:07 +0000 (23:19 +0200)]
drm/nouveau/therm/fan/tach: default to 2 pulses per revolution
I spent some time this weekend trying to find in the vbios the number of
pulses per revolutions in the vbios but couldn't find it. It would seem
all my cards have 2 pulses per revolution so let's stick to that until
further notice.
Thermal table's id 0x48 may indicate this information but it would seem
that changing the value results in the blob power or clock gating the
RPM counter... We should ask NVIDIA about that, should be trivial-enough
for them to answer.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
John Rowley [Mon, 12 May 2014 21:34:57 +0000 (21:34 +0000)]
drm/nvf0/device: enable video decoding engines on gk110/gk208
Only tested on nvf1, was advised to enable on all.
Signed-off-by: John Rowley <john.rowley08@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
John Rowley [Mon, 12 May 2014 21:34:56 +0000 (21:34 +0000)]
drm/nvf1/device: add support for 0xf1 (gk110b)
Signed-off-by: John Rowley <john.rowley08@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:42 +0000 (18:32 +0900)]
drm/nouveau/device: support for probing GK20A
Set the correct subdev/engine classes when GK20A (0xea) is probed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:41 +0000 (18:32 +0900)]
drm/nouveau/graph: add GK20A support
Add a GR device for GK20A based on NVE4, with the correct classes
definitions (GK20A's 3D class is 0xa297).
Most of the NVE4 code can be used on GK20A, so make relevant bits of
NVE4 available to other chips as well.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:40 +0000 (18:32 +0900)]
drm/nouveau/graph: pad firmware code at load time
Pad the microcode to a multiple of 0x40 words, otherwise firmware will
fail to run from non-prepadded firmware files.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:39 +0000 (18:32 +0900)]
drm/nouveau/graph: enable when using external fw
nvc0_graph_ctor() would only let the graphics engine be enabled if its
oclass has a proper microcode linked to it. This prevents GR from being
enabled at all on chips that rely exclusively on external firmware, even
though such a use-case is valid.
Relax the conditions enabling the GR engine to also include the case
where an external firmware has also been loaded.
Also switch to external firmware if the graph class has no microcode
linked to it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:38 +0000 (18:32 +0900)]
drm/nouveau/fifo: add GK20A support
GK20A's FIFO is compatible with NVE0, but only features 128 channels and
1 runlist.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:37 +0000 (18:32 +0900)]
drm/nouveau/fb: add GK20A support
Add a simple FB device for GK20A, as well as a RAM implementation
suitable for chips that use system memory as video RAM.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:36 +0000 (18:32 +0900)]
drm/nouveau/ibus: add GK20A support
Add support for initializing the priv ring of GK20A. This is done by the
BIOS on desktop GPUs, but needs to be done by hand on Tegra.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:35 +0000 (18:32 +0900)]
drm/nvc0/bar: support chips without BAR3
Adapt the NVC0 BAR driver to make it able to support chips that do not
expose a BAR3. When this happens, BAR1 is then used for USERD mapping
and the BAR alloc() functions is disabled, making GPU objects unable
to rely on BAR for data access and falling back to PRAMIN.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Fri, 2 May 2014 09:32:34 +0000 (18:32 +0900)]
drm/nouveau/bar: only ioremap BAR3 if it exists
Some chips that use system memory exclusively (e.g. GK20A) do not
expose 2 BAR regions. For them only BAR1 exists, and it should be used
for USERD mapping. Do not map BAR3 if its resource does not exist.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Tue, 10 Jun 2014 03:09:01 +0000 (13:09 +1000)]
Merge branch 'drm-next-3.16' of git://people.freedesktop.org/~agd5f/linux into drm-next
Some additional patches for radeon for 3.16 now that -fixes has been merged.
- Gart fix for all asics r6xx+
- Add some VM tuning parameters
- misc fixes
* 'drm-next-3.16' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Move fb update from radeon_flip_work_func to radeon_crtc_page_flip
drm/radeon/dpm: powertune updates for SI
Revert "drm/radeon: use variable UVD clocks"
drm/radeon: add query for number of active CUs
drm/radeon: add debugfs file to trigger GPU reset
drm/radeon: make vm_block_size a module parameter
drm/radeon: make VM size a module parameter (v2)
drm/radeon: rename alt_domain to allowed_domains
drm/radeon: use the SDMA on for buffer moves on CIK again
drm/radeon: remove range check from *_gart_set_page
drm/radeon: stop poisoning the GART TLB
drm/radeon: hdmi deep color modes must obey clock limit of sink.
drm/edid: Store all supported hdmi deep color modes in drm_display_info
drm/radeon: add missing vce init case for hawaii
drm/radeon: use lower_32_bits where appropriate
Michel Dänzer [Tue, 10 Jun 2014 01:21:57 +0000 (10:21 +0900)]
drm/radeon: Move fb update from radeon_flip_work_func to radeon_crtc_page_flip
Fixes WARN()s from the DRM core since the page flip rework.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77521
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 6 Jun 2014 22:58:10 +0000 (18:58 -0400)]
drm/radeon/dpm: powertune updates for SI
Updated powertune settings for certain SI asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Sat, 7 Jun 2014 15:31:25 +0000 (11:31 -0400)]
Revert "drm/radeon: use variable UVD clocks"
This caused reduced performance for some users with advanced post
processing enabled. We need a better method to pick the
UVD state based on the amount of post processing required or tune
the advanced post processing to fit within the lower power state
envelope.
This reverts commit
14a9579ddbf15dd1992a9481a4ec80b0b91656d5.
Cc: "3.15" <stable@vger.kernel.org>
Alex Deucher [Mon, 2 Jun 2014 20:13:21 +0000 (16:13 -0400)]
drm/radeon: add query for number of active CUs
Query to find out how many compute units on a GPU.
Useful for OpenCL usermode drivers.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 2 Jun 2014 15:33:10 +0000 (17:33 +0200)]
drm/radeon: add debugfs file to trigger GPU reset
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 6 Jun 2014 03:56:50 +0000 (23:56 -0400)]
drm/radeon: make vm_block_size a module parameter
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 6 Jun 2014 03:47:32 +0000 (23:47 -0400)]
drm/radeon: make VM size a module parameter (v2)
v2: agd5f: simplify patch
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 2 Jun 2014 15:33:07 +0000 (17:33 +0200)]
drm/radeon: rename alt_domain to allowed_domains
And also domain to prefered_domains. That matches better
what those values represent.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 4 Jun 2014 13:29:58 +0000 (15:29 +0200)]
drm/radeon: use the SDMA on for buffer moves on CIK again
The underlying reason for the crashes seems to be fixed now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 4 Jun 2014 13:29:57 +0000 (15:29 +0200)]
drm/radeon: remove range check from *_gart_set_page
We never check the return value anyway and if the
index isn't valid would crash way before calling
the functions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 4 Jun 2014 13:29:56 +0000 (15:29 +0200)]
drm/radeon: stop poisoning the GART TLB
When we set the valid bit on invalid GART entries they are
loaded into the TLB when an adjacent entry is loaded. This
poisons the TLB with invalid entries which are sometimes
not correctly removed on TLB flush.
For stable inclusion the patch probably needs to be modified a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Thu, 5 Jun 2014 13:58:24 +0000 (09:58 -0400)]
drm/radeon: hdmi deep color modes must obey clock limit of sink.
Make sure that a hdmi deep color mode can't exceed the max tmds
clock limit of a hdmi sink if such a limit is defined by edid.
If requested deep color bpc would exceed the limit given the mode
to be set, try to degrade gracefully to lower supported deep color
bpc or to standard 8 bpc if needed.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Thu, 5 Jun 2014 13:52:10 +0000 (09:52 -0400)]
drm/edid: Store all supported hdmi deep color modes in drm_display_info
HDMI deep color setup must know which modes are supported if
it needs to degrade gracefully, as only 12 bpc / dc_36 is
guaranteed, but 10 bpc / dc_30 is optional. The maximum bpc
is not sufficient for this.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 6 Jun 2014 03:01:03 +0000 (23:01 -0400)]
drm/radeon: add missing vce init case for hawaii
Hawaii has the same version of VCE as other CIK parts.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Christian König [Tue, 3 Jun 2014 18:51:46 +0000 (20:51 +0200)]
drm/radeon: use lower_32_bits where appropriate
Replace occurrences of "v & 0xffffffff" with lower_32_bits(v)
when it's next to an upper_32_bits(v). Also remove unnecessary
"upper_32_bits(v) & 0xffffffff" code snippets.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Damien Lespiau [Mon, 9 Jun 2014 13:39:49 +0000 (14:39 +0100)]
drm: Remove DRM_ARRAY_SIZE() for ARRAY_SIZE()
I cannot see a need to provide a DRM_ version of ARRAY_SIZE(), only used
in a few places. I suspect its usage has been spread by copy & paste
rather than anything else.
Let's just remove it for plain ARRAY_SIZE().
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Damien Lespiau [Mon, 9 Jun 2014 13:21:08 +0000 (14:21 +0100)]
drm: Remove spurious ';'
One small step after another, the never-ending crusade towards better
code continues.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Damien Lespiau [Mon, 9 Jun 2014 13:20:22 +0000 (14:20 +0100)]
drm/doc: Add the "type" plane property to the list of properties
Matt aded this plane property before we had a table giving a summary of
the properties. Add it there.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Damien Lespiau [Mon, 9 Jun 2014 13:40:35 +0000 (14:40 +0100)]
drm/doc: Fix nouveau typo
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 9 Jun 2014 22:53:00 +0000 (08:53 +1000)]
Merge tag 'drm/panel/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v3.16-rc1
This set of commits contains a couple of fixes to existing panel drivers
and support for some new panels.
One commit touches the DRM core in that in modifies the MIPI DSI support
to hook up the shutdown function so that drivers can provide code that's
run on shutdown. This is used by a subsequent commit to make the simple
panel driver power off the backlight on shutdown.
* tag 'drm/panel/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: simple - Add AUO B133XTN01 panel support
drm/panel: simple - Disable panel on shutdown
drm/panel: add support for EDT ET057090DHU panel
drm/panel: Add support for EDT ETM0700G0DH6 and ET070080DH6 panels
drm/panel: ld9040: add power control sequence
drm/panel: s6e8aa0: silence array overflow warning
drm/dsi: Support device shutdown
Dave Airlie [Mon, 9 Jun 2014 22:51:19 +0000 (08:51 +1000)]
Merge tag 'drm/tegra/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.16-rc1
The majority of these changes are a slew of cleanups across the board.
A more noteworthy change is the addition of drm_dev_set_unique() and the
conversion of the Tegra DRM driver to use it. This allows us to get rid
of the host1x drm_bus implementation. Other USB and platform drivers can
be changed in a similar way. Unfortunately for most PCI devices there is
some userspace that relies on the old functionality and cannot be as
easily converted.
HDMI and hardware cursor support is added for Tegra124. The SOR output
gains support for exposing CRCs via debugfs, which can be used for
automated testing. Many values that were hardcoded in the SOR/eDP code
are now computed at runtime to increase compatibility with more devices.
* tag 'drm/tegra/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux: (47 commits)
drm/tegra: sor - Remove obsolete comment
drm/tegra: sor - Enable only the necessary number of lanes
drm/tegra: sor - Power on only the necessary lanes
drm/tegra: sor - Do not program interlaced mode registers
drm/tegra: sor - Do not hardcode link speed
drm/tegra: sor - Do not hardcode number of blank symbols
drm/tegra: sor - Don't hardcode link parameters
drm/tegra: sor - Change power down ordering
drm/tegra: sor - Fix copy/paste error
drm/tegra: sor - Remove pixel clock rounding
drm/tegra: sor - Make debugfs setup consistent
drm/tegra: sor - Recursively remove debugfs tree
drm/tegra: dp - Mark the connector as hotplug capable
drm/tegra: dp - Implement hotplug detection in work queue
drm/tegra: Add hardware cursor support
drm/tegra: Remove host1x drm_bus implementation
drm: Document how to register devices without struct drm_bus
drm: Add device registration documentation
drm: Introduce drm_dev_set_unique()
gpu: host1x: Rename internal functions for clarity
...
Stéphane Marchesin [Sat, 24 May 2014 02:27:59 +0000 (19:27 -0700)]
drm/panel: simple - Add AUO B133XTN01 panel support
This panel is used by nyan-big and can be supported by the simple-panel
driver.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
[treding@nvidia.com: add device tree binding document]
Signed-off-by: Thierry Reding <treding@nvidia.com>
projects / openwrt / staging / blogic.git / log