openwrt/staging/linusw.git
11 years agoar71xx: fix uimage split for ew-dorin
Felix Fietkau [Mon, 15 Jul 2013 16:59:58 +0000 (16:59 +0000)]
ar71xx: fix uimage split for ew-dorin

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37350

11 years agoar71xx: refresh patches
Felix Fietkau [Mon, 15 Jul 2013 15:12:41 +0000 (15:12 +0000)]
ar71xx: refresh patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37349

11 years agokernel: refresh 3.10 patches
Felix Fietkau [Mon, 15 Jul 2013 15:12:37 +0000 (15:12 +0000)]
kernel: refresh 3.10 patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37348

11 years agokernel: fix another corner case in the bridge state patch (#13874)
Felix Fietkau [Mon, 15 Jul 2013 15:12:33 +0000 (15:12 +0000)]
kernel: fix another corner case in the bridge state patch (#13874)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37347

11 years agobase-files: reject invalid uci keys in network_get_device() and related procedures...
Jo-Philipp Wich [Mon, 15 Jul 2013 13:42:58 +0000 (13:42 +0000)]
base-files: reject invalid uci keys in network_get_device() and related procedures (#13886)

SVN-Revision: 37345

11 years agonetfilter: remove use of obsolete compatibility config symbols for mark and connmark
Felix Fietkau [Mon, 15 Jul 2013 13:08:20 +0000 (13:08 +0000)]
netfilter: remove use of obsolete compatibility config symbols for mark and connmark

fixes duplication of xt_mark and xt_connmark module entries

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37344

11 years agomac80211: fix a crash in legacy minstrel when no STA exists
Felix Fietkau [Mon, 15 Jul 2013 12:35:23 +0000 (12:35 +0000)]
mac80211: fix a crash in legacy minstrel when no STA exists

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37342

11 years agokernel: fix a bridge issue that broke WDS client handling in 3.9+
Felix Fietkau [Mon, 15 Jul 2013 12:25:58 +0000 (12:25 +0000)]
kernel: fix a bridge issue that broke WDS client handling in 3.9+

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37341

11 years agobrcm47xx: fix name of patch
Hauke Mehrtens [Mon, 15 Jul 2013 11:42:54 +0000 (11:42 +0000)]
brcm47xx: fix name of patch

SVN-Revision: 37340

11 years agoramips: add a patch to make dwc2 work with boards that have an old bootloader
John Crispin [Mon, 15 Jul 2013 11:34:13 +0000 (11:34 +0000)]
ramips: add a patch to make dwc2 work with boards that have an old bootloader

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37339

11 years agokernel: add usb-dwc2 kmod
John Crispin [Mon, 15 Jul 2013 11:08:04 +0000 (11:08 +0000)]
kernel: add usb-dwc2 kmod

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37338

11 years agobcm63xx: update ralink wlan firmware hotplug script for new eeprom size
Felix Fietkau [Mon, 15 Jul 2013 11:07:59 +0000 (11:07 +0000)]
bcm63xx: update ralink wlan firmware hotplug script for new eeprom size

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37337

11 years agoprocd: make old button hotplug rules work until all packages are migrated
John Crispin [Mon, 15 Jul 2013 11:07:53 +0000 (11:07 +0000)]
procd: make old button hotplug rules work until all packages are migrated

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37336

11 years agolantiq: update ralink wlan firmware hotplug script for new eeprom size
Felix Fietkau [Mon, 15 Jul 2013 11:06:07 +0000 (11:06 +0000)]
lantiq: update ralink wlan firmware hotplug script for new eeprom size

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37334

11 years agokernel: fix block2mtd build after removing the device refresh ioctl
Felix Fietkau [Mon, 15 Jul 2013 11:01:48 +0000 (11:01 +0000)]
kernel: fix block2mtd build after removing the device refresh ioctl

fixes #13882

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37332

11 years agoramips: add ralink v3.10 support
John Crispin [Mon, 15 Jul 2013 10:06:55 +0000 (10:06 +0000)]
ramips: add ralink v3.10 support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37331

11 years agoubox: fix compile error (#13877)
Felix Fietkau [Mon, 15 Jul 2013 08:17:33 +0000 (08:17 +0000)]
ubox: fix compile error (#13877)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37330

11 years agoBump iptables version
Steven Barth [Mon, 15 Jul 2013 06:12:07 +0000 (06:12 +0000)]
Bump iptables version

SVN-Revision: 37329

11 years agoiptables: restore reap functionality to recent module
Steven Barth [Mon, 15 Jul 2013 06:12:03 +0000 (06:12 +0000)]
iptables: restore reap functionality to recent module

The reap functionality appears to have been accidentally disabled by
commit 74ded7257e5da5e309844d386290f24ae91950a6 to iptables.git, see:

  git://git.netfilter.org/iptables.git

and subsequently in iptables 1.4.15 and later.  This adds a patch to
restore reap functionality for recent_opts_v1.

Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 37328

11 years agoimx6: switch to askconsole
Luka Perkov [Mon, 15 Jul 2013 00:03:40 +0000 (00:03 +0000)]
imx6: switch to askconsole

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37326

11 years agoar71xx: remove patches for 3.8 (leftover after r37315)
Luka Perkov [Sun, 14 Jul 2013 22:57:47 +0000 (22:57 +0000)]
ar71xx: remove patches for 3.8 (leftover after r37315)

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37324

11 years agoremove broken mirrors for linux kernel
Mirko Vogt [Sun, 14 Jul 2013 21:26:35 +0000 (21:26 +0000)]
remove broken mirrors for linux kernel

ftp.de.kernel.org / ftp.fr.kernel.org don't resolv anymore,
ftp.all.kernel.org is DNS round robin anyway

Signed-off-by: Mirko Vogt <mirko@openwrt.org>
SVN-Revision: 37323

11 years agorealview: switch to 3.10 kernel
Florian Fainelli [Sun, 14 Jul 2013 21:04:36 +0000 (21:04 +0000)]
realview: switch to 3.10 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37322

11 years agorealview: add support for 3.10 kernel
Florian Fainelli [Sun, 14 Jul 2013 21:04:15 +0000 (21:04 +0000)]
realview: add support for 3.10 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37321

11 years agokernel: add some more ARM related configuration symbols
Florian Fainelli [Sun, 14 Jul 2013 21:03:53 +0000 (21:03 +0000)]
kernel: add some more ARM related configuration symbols

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37320

11 years agonetifd: update to latest version, add bridge_empty option
Luka Perkov [Sun, 14 Jul 2013 18:50:04 +0000 (18:50 +0000)]
netifd: update to latest version, add bridge_empty option

with this option enabled it's possible to create empty bridges

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37318

11 years agolantiq: apply [37258] also to the 3.9 kernel patches
John Crispin [Sun, 14 Jul 2013 18:28:02 +0000 (18:28 +0000)]
lantiq: apply [37258] also to the 3.9 kernel patches

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37317

11 years agoswconfig: fix dependency bug introduced by [37304]
John Crispin [Sun, 14 Jul 2013 18:16:42 +0000 (18:16 +0000)]
swconfig: fix dependency bug introduced by [37304]

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37316

11 years agoar71xx: fix maximum watchdog timeout
John Crispin [Sun, 14 Jul 2013 18:01:09 +0000 (18:01 +0000)]
ar71xx: fix maximum watchdog timeout

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37315

11 years agoramips: disable ill_acc driver by default
John Crispin [Sun, 14 Jul 2013 18:01:00 +0000 (18:01 +0000)]
ramips: disable ill_acc driver by default

The driver seems to be causoing boot rpoblems on some SoCs

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37314

11 years agoprocd: update to latest git revision
John Crispin [Sun, 14 Jul 2013 18:00:51 +0000 (18:00 +0000)]
procd: update to latest git revision

* improves logread over net code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37313

11 years agoubox: update to latest git revison
John Crispin [Sun, 14 Jul 2013 18:00:43 +0000 (18:00 +0000)]
ubox: update to latest git revison

this fixes a stack corruption in kmodloader. lsmod should be fixed now

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37312

11 years agoralink: drop v3.8 support
John Crispin [Sun, 14 Jul 2013 18:00:34 +0000 (18:00 +0000)]
ralink: drop v3.8 support

Signed-off-by: John Crispin <blogic@opewnrt.org>
SVN-Revision: 37311

11 years agoar71xx: update to 3.10.1
Felix Fietkau [Sun, 14 Jul 2013 17:29:56 +0000 (17:29 +0000)]
ar71xx: update to 3.10.1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37310

11 years agomac80211: b43: load b43 on core rev 17 and 18.
Hauke Mehrtens [Sun, 14 Jul 2013 14:23:04 +0000 (14:23 +0000)]
mac80211: b43: load b43 on core rev 17 and 18.

This is now controlled by a module parameter and the default
configuration depends on brcmsmac being installed.
This patch causes b43 to take core rev 17 and 18 always by default.

SVN-Revision: 37307

11 years agomac80211: b43: activate LP-Phy support every time
Hauke Mehrtens [Sun, 14 Jul 2013 14:13:32 +0000 (14:13 +0000)]
mac80211: b43: activate LP-Phy support every time

SVN-Revision: 37305

11 years agobrcm47xx: use b53 phy driver for the switch in kernel 3.10
Hauke Mehrtens [Sun, 14 Jul 2013 14:11:17 +0000 (14:11 +0000)]
brcm47xx: use b53 phy driver for the switch in kernel 3.10

This makes it possible to use swconfig to controll the switch.

This was tested with devices using b43 and bgmac.
This was not tested on devices using tg3.
This does not support the adm switch used in some very old devices.

SVN-Revision: 37304

11 years agoar71xx: use uimage split for WHR-HP-G300N
Felix Fietkau [Sun, 14 Jul 2013 14:06:01 +0000 (14:06 +0000)]
ar71xx: use uimage split for WHR-HP-G300N

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37303

11 years agoar71xx: use uimage split for dlrtdev
Felix Fietkau [Sun, 14 Jul 2013 14:05:57 +0000 (14:05 +0000)]
ar71xx: use uimage split for dlrtdev

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37302

11 years agoar71xx: use uimage split for Allnet devices
Felix Fietkau [Sun, 14 Jul 2013 14:05:53 +0000 (14:05 +0000)]
ar71xx: use uimage split for Allnet devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37301

11 years agoar71xx: use uimage split for Cameo devices
Felix Fietkau [Sun, 14 Jul 2013 14:05:50 +0000 (14:05 +0000)]
ar71xx: use uimage split for Cameo devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37300

11 years agoar71xx: use uimage split for DIR-825B1
Felix Fietkau [Sun, 14 Jul 2013 14:05:46 +0000 (14:05 +0000)]
ar71xx: use uimage split for DIR-825B1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37299

11 years agoar71xx: use uimage split for Embedded Wireless Dorin
Felix Fietkau [Sun, 14 Jul 2013 14:05:42 +0000 (14:05 +0000)]
ar71xx: use uimage split for Embedded Wireless Dorin

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37298

11 years agoar71xx: use uimage split for Ubiquiti XM devices
Felix Fietkau [Sun, 14 Jul 2013 14:05:39 +0000 (14:05 +0000)]
ar71xx: use uimage split for Ubiquiti XM devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37297

11 years agoar71xx: increase kernel size for wndr3700 based devices
Felix Fietkau [Sun, 14 Jul 2013 14:05:35 +0000 (14:05 +0000)]
ar71xx: increase kernel size for wndr3700 based devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37296

11 years agoar71xx: use uimage split for WZR-HP-G300NH2
Felix Fietkau [Sun, 14 Jul 2013 14:05:31 +0000 (14:05 +0000)]
ar71xx: use uimage split for WZR-HP-G300NH2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37295

11 years agoar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
Felix Fietkau [Sun, 14 Jul 2013 14:05:27 +0000 (14:05 +0000)]
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37294

11 years agoar71xx: use uimage split for WZR-HP-G300NH
Felix Fietkau [Sun, 14 Jul 2013 14:05:23 +0000 (14:05 +0000)]
ar71xx: use uimage split for WZR-HP-G300NH

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37293

11 years agoar71xx: use uimage split for WZR-HP-G450H
Felix Fietkau [Sun, 14 Jul 2013 14:05:19 +0000 (14:05 +0000)]
ar71xx: use uimage split for WZR-HP-G450H

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37292

11 years agoar71xx: enable uimage split and use it for carambola2
Felix Fietkau [Sun, 14 Jul 2013 14:05:16 +0000 (14:05 +0000)]
ar71xx: enable uimage split and use it for carambola2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37291

11 years agoar71xx: remove linux 3.8
Felix Fietkau [Sun, 14 Jul 2013 14:05:12 +0000 (14:05 +0000)]
ar71xx: remove linux 3.8

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37290

11 years agoar71xx: move the watchdog driver to the kernel
Felix Fietkau [Sun, 14 Jul 2013 14:05:08 +0000 (14:05 +0000)]
ar71xx: move the watchdog driver to the kernel

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37289

11 years agoar71xx: set linux 3.10 as default
Felix Fietkau [Sun, 14 Jul 2013 14:05:04 +0000 (14:05 +0000)]
ar71xx: set linux 3.10 as default

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37288

11 years agobrcm47xx: add initial support for kernel 3.10
Hauke Mehrtens [Sun, 14 Jul 2013 13:44:45 +0000 (13:44 +0000)]
brcm47xx: add initial support for kernel 3.10

SVN-Revision: 37287

11 years agobrcm47xx: fix switch handling
Hauke Mehrtens [Sun, 14 Jul 2013 13:19:58 +0000 (13:19 +0000)]
brcm47xx: fix switch handling

This fixes some problems with the switch handling

 * It now send the messages again to indicate a button for failsafe mode should be pressed
 * it does not leak packages between wan and lan any more
 * the switch works again in normal mode

The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.

This should close #13869, #13868 and #13716

SVN-Revision: 37286

11 years agokernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848)
Felix Fietkau [Sun, 14 Jul 2013 13:10:22 +0000 (13:10 +0000)]
kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37285

11 years agobrcm47xx: do not load the kernel modules needed for Ethernet manually
Hauke Mehrtens [Sun, 14 Jul 2013 12:59:00 +0000 (12:59 +0000)]
brcm47xx: do not load the kernel modules needed for Ethernet manually

add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.

SVN-Revision: 37284

11 years agokernel: implement automatic rootfs split from the firmware partition in linux 3.10...
Felix Fietkau [Sun, 14 Jul 2013 12:57:03 +0000 (12:57 +0000)]
kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37283

11 years agokernel/base-files: clean up old code related to refreshing mtd partitions, it is...
Felix Fietkau [Sun, 14 Jul 2013 12:56:58 +0000 (12:56 +0000)]
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37282

11 years agobrcm47xx: do not change nvram without user interaction
Hauke Mehrtens [Sun, 14 Jul 2013 12:56:42 +0000 (12:56 +0000)]
brcm47xx: do not change nvram without user interaction

SVN-Revision: 37281

11 years agobroadcom-diag: make it work with kernel 3.10
Hauke Mehrtens [Sun, 14 Jul 2013 11:30:31 +0000 (11:30 +0000)]
broadcom-diag: make it work with kernel 3.10

In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.

SVN-Revision: 37280

11 years agobroadcom-diag: check the correct value for not null.
Hauke Mehrtens [Sun, 14 Jul 2013 11:28:37 +0000 (11:28 +0000)]
broadcom-diag: check the correct value for not null.

This also fixes a compile warning.

SVN-Revision: 37279

11 years agobroadcom-diag: reoder some parts.
Hauke Mehrtens [Sun, 14 Jul 2013 11:26:35 +0000 (11:26 +0000)]
broadcom-diag: reoder some parts.

This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.

SVN-Revision: 37278

11 years agobusybox: disable features marked as broken (#13782)
Felix Fietkau [Sun, 14 Jul 2013 11:00:59 +0000 (11:00 +0000)]
busybox: disable features marked as broken (#13782)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37277

11 years agokernel: refresh patches for kernel 3.8.13
Hauke Mehrtens [Sat, 13 Jul 2013 22:45:56 +0000 (22:45 +0000)]
kernel: refresh patches for kernel 3.8.13

SVN-Revision: 37276

11 years agokernel: update to kernel 3.10.1 and refresh patches
Hauke Mehrtens [Sat, 13 Jul 2013 22:45:09 +0000 (22:45 +0000)]
kernel: update to kernel 3.10.1 and refresh patches

SVN-Revision: 37275

11 years agokernel: update to kernel 3.9.10 and refresh patches
Hauke Mehrtens [Sat, 13 Jul 2013 22:43:10 +0000 (22:43 +0000)]
kernel: update to kernel 3.9.10 and refresh patches

SVN-Revision: 37274

11 years agoar71xx: fix ar933x watchdog clock (#13866)
Felix Fietkau [Sat, 13 Jul 2013 22:29:53 +0000 (22:29 +0000)]
ar71xx: fix ar933x watchdog clock (#13866)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37273

11 years agobrcm47xx: proc gets mounted without this patch
Hauke Mehrtens [Sat, 13 Jul 2013 21:42:19 +0000 (21:42 +0000)]
brcm47xx: proc gets mounted without this patch

SVN-Revision: 37272

11 years agobrcm47xx: remove obsolete hotplug stuff
Hauke Mehrtens [Sat, 13 Jul 2013 20:38:33 +0000 (20:38 +0000)]
brcm47xx: remove obsolete hotplug stuff

SVN-Revision: 37271

11 years agomac80211: tweak mac address allocation
Felix Fietkau [Sat, 13 Jul 2013 11:39:48 +0000 (11:39 +0000)]
mac80211: tweak mac address allocation

Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37269

11 years agobcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
Hauke Mehrtens [Fri, 12 Jul 2013 13:46:27 +0000 (13:46 +0000)]
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs

This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37268

11 years agomac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel...
Felix Fietkau [Fri, 12 Jul 2013 08:10:19 +0000 (08:10 +0000)]
mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37265

11 years agomac80211: merge a fix for PS-Poll handling, refresh patches
Felix Fietkau [Fri, 12 Jul 2013 07:59:59 +0000 (07:59 +0000)]
mac80211: merge a fix for PS-Poll handling, refresh patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37264

11 years agomac80211: remove bogus module params from compat.ko
Felix Fietkau [Fri, 12 Jul 2013 07:59:51 +0000 (07:59 +0000)]
mac80211: remove bogus module params from compat.ko

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37263

11 years agoar71xx: add carambola2 support
John Crispin [Thu, 11 Jul 2013 21:16:53 +0000 (21:16 +0000)]
ar71xx: add carambola2 support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37260

11 years agoprocd: update to latest git revision
John Crispin [Thu, 11 Jul 2013 21:16:43 +0000 (21:16 +0000)]
procd: update to latest git revision

this fixes a regression in the watchdog init code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37259

11 years agolantiq: revert 36778 as it breaks irq assignment to pci devices
John Crispin [Thu, 11 Jul 2013 21:16:34 +0000 (21:16 +0000)]
lantiq: revert 36778 as it breaks irq assignment to pci devices

Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37258

11 years agoprocd: make the log port default to 514 if none is specified
John Crispin [Thu, 11 Jul 2013 21:16:25 +0000 (21:16 +0000)]
procd: make the log port default to 514 if none is specified

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37257

11 years agokernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed
Felix Fietkau [Thu, 11 Jul 2013 20:56:30 +0000 (20:56 +0000)]
kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37256

11 years agokernel: add a patch that reduces module size by removing non-essential information...
Felix Fietkau [Thu, 11 Jul 2013 20:56:27 +0000 (20:56 +0000)]
kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37255

11 years agokernel: make libsas depend on x86
Felix Fietkau [Thu, 11 Jul 2013 20:56:22 +0000 (20:56 +0000)]
kernel: make libsas depend on x86

It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37254

11 years agokernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed
Felix Fietkau [Thu, 11 Jul 2013 20:56:19 +0000 (20:56 +0000)]
kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37253

11 years agokernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed
Felix Fietkau [Thu, 11 Jul 2013 20:56:15 +0000 (20:56 +0000)]
kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37252

11 years agoar71xx: set priority of ath79_wdt to 1
John Crispin [Thu, 11 Jul 2013 17:01:08 +0000 (17:01 +0000)]
ar71xx: set priority of ath79_wdt to 1

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37251

11 years agoprocd: update to latest git version
John Crispin [Thu, 11 Jul 2013 17:01:03 +0000 (17:01 +0000)]
procd: update to latest git version

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37250

11 years agoprocd: add proto and trigger support to the /etc/init.d/log
John Crispin [Thu, 11 Jul 2013 17:00:59 +0000 (17:00 +0000)]
procd: add proto and trigger support to the /etc/init.d/log

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37249

11 years agoprocd: add a small script that handles config reloads until configd is ready
John Crispin [Thu, 11 Jul 2013 17:00:54 +0000 (17:00 +0000)]
procd: add a small script that handles config reloads until configd is ready

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37248

11 years agoprocd: the delete ubus call was passed the wrong field name for services
John Crispin [Thu, 11 Jul 2013 17:00:49 +0000 (17:00 +0000)]
procd: the delete ubus call was passed the wrong field name for services

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37247

11 years agoubox: upgrade to latest version
John Crispin [Thu, 11 Jul 2013 17:00:45 +0000 (17:00 +0000)]
ubox: upgrade to latest version

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37246

11 years agodropbear: register a config.change trigger
John Crispin [Thu, 11 Jul 2013 17:00:40 +0000 (17:00 +0000)]
dropbear: register a config.change trigger

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37245

11 years agobase-files: convert sysntpd init script to procd
John Crispin [Thu, 11 Jul 2013 17:00:35 +0000 (17:00 +0000)]
base-files: convert sysntpd init script to procd

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37244

11 years agobusybox: convert crond init script to procd
John Crispin [Thu, 11 Jul 2013 17:00:30 +0000 (17:00 +0000)]
busybox: convert crond init script to procd

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37243

11 years agobusybox: convert telnet init script to procd
John Crispin [Thu, 11 Jul 2013 17:00:26 +0000 (17:00 +0000)]
busybox: convert telnet init script to procd

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37242

11 years agobase-files: run readlink on initscript name before opening services
John Crispin [Thu, 11 Jul 2013 17:00:21 +0000 (17:00 +0000)]
base-files: run readlink on initscript name before opening services

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37241

11 years agobase-file: usbfs is no longer mounted under /proc/bus/usb
John Crispin [Thu, 11 Jul 2013 17:00:17 +0000 (17:00 +0000)]
base-file: usbfs is no longer mounted under /proc/bus/usb

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37240

11 years agoar71xx: fix TPLINK/TPLINKOLD initramfs images typos
Florian Fainelli [Wed, 10 Jul 2013 21:28:34 +0000 (21:28 +0000)]
ar71xx: fix TPLINK/TPLINKOLD initramfs images typos

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37237

11 years agobrcm2708: drop support for 3.3 kernel
Florian Fainelli [Wed, 10 Jul 2013 19:43:11 +0000 (19:43 +0000)]
brcm2708: drop support for 3.3 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37236

11 years agobrcm2708: package the i2c master driver module
Florian Fainelli [Wed, 10 Jul 2013 19:43:07 +0000 (19:43 +0000)]
brcm2708: package the i2c master driver module

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37235

11 years agobrcm2708: package the SPI master controller driver
Florian Fainelli [Wed, 10 Jul 2013 19:43:02 +0000 (19:43 +0000)]
brcm2708: package the SPI master controller driver

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37234