Christoph Hellwig [Wed, 20 Dec 2017 14:55:40 +0000 (15:55 +0100)]
m32r: remove the unused dma_capable helper
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Wed, 20 Dec 2017 10:57:40 +0000 (11:57 +0100)]
arc: remove CONFIG_ARC_PLAT_NEEDS_PHYS_TO_DMA
We always use the stub definitions, so remove the unused other code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Christoph Hellwig [Wed, 20 Dec 2017 10:12:02 +0000 (11:12 +0100)]
powerpc: remove unused flush_write_buffers definition
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Wed, 20 Dec 2017 10:11:35 +0000 (11:11 +0100)]
m32r: remove unused flush_write_buffers definition
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Wed, 20 Dec 2017 10:11:13 +0000 (11:11 +0100)]
hexagon: remove unused flush_write_buffers definition
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Fri, 22 Dec 2017 09:42:06 +0000 (10:42 +0100)]
alpha: mark jensen as broken
CONFIG_ALPHA_JENSEN has failed to compile since commit
6aca0503
("alpha/dma: use common noop dma ops"), so mark it as broken.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Linus Torvalds [Sun, 7 Jan 2018 22:22:41 +0000 (14:22 -0800)]
Linux 4.15-rc7
Linus Torvalds [Sun, 7 Jan 2018 19:42:57 +0000 (11:42 -0800)]
Merge branch 'parisc-4.15-3' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Many small fixes to show the real physical addresses of devices
instead of hashed addresses.
- One important fix to unbreak 32-bit SMP support: We forgot to 16-byte
align the spinlocks in the assembler code.
- Qemu support: The host will get a chance to sleep when the parisc
guest is idle. We use the same mechanism as the power architecture by
overlaying the "or %r10,%r10,%r10" instruction which is simply a nop
on real hardware.
* 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: qemu idle sleep support
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
parisc: Show unhashed EISA EEPROM address
parisc: Show unhashed HPA of Dino chip
parisc: Show initial kernel memory layout unhashed
parisc: Show unhashed hardware inventory
Linus Torvalds [Sun, 7 Jan 2018 19:33:12 +0000 (11:33 -0800)]
Merge tag 'apparmor-pr-2018-01-07' of git://git./linux/kernel/git/jj/linux-apparmor
Pull apparmor fix from John Johansen:
"This fixes a regression when the kernel feature set is reported as
supporting mount and policy is pinned to a feature set that does not
support mount mediation"
* tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix regression in mount mediation when feature set is pinned
Linus Torvalds [Sun, 7 Jan 2018 19:01:59 +0000 (11:01 -0800)]
Merge tag 'led_fixes_for_4.15-rc7' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED fix from Jacek Anaszewski:
"The commit
2b83ff96f51d for 4.15-rc6, which was fixing LED brightness
setting after clearing delay_off broke the behavior on any alteration
of delay_on{off} properties, due to use of a LED core helper that does
too much for this particular case"
* tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: core: Fix regression caused by commit
2b83ff96f51d
Linus Torvalds [Sun, 7 Jan 2018 19:00:06 +0000 (11:00 -0800)]
Merge tag 'for-linus-
20180107' of git://git.infradead.org/linux-mtd
Pull MTD bugfix from Richard Weinberger:
"A single fix for the pxa3xx NAND driver"
* tag 'for-linus-
20180107' of git://git.infradead.org/linux-mtd:
mtd: nand: pxa3xx: Fix READOOB implementation
Jacek Anaszewski [Wed, 3 Jan 2018 20:13:45 +0000 (21:13 +0100)]
leds: core: Fix regression caused by commit
2b83ff96f51d
Commit
2b83ff96f51d ("led: core: Fix brightness setting when setting delay_off=0")
replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink()
in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as
zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev.
Cleansing of the latter ones wasn't required to fix the original issue but
wasn't considered harmful. It nonetheless turned out to be so in case when
pointer to one or both props is passed to led_blink_set() like in the
ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or
delay_off arguments to led_blink_setup(), which results either in stopping
the software blinking or setting blinking frequency always to 1Hz.
Avoid using led_stop_software_blink() and add a single call required
to clear LED_BLINK_SW flag, which was the only needed modification to
fix the original issue.
Fixes
2b83ff96f51d ("led: core: Fix brightness setting when setting delay_off=0")
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Linus Torvalds [Sun, 7 Jan 2018 01:13:21 +0000 (17:13 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
- untangle sys_close() abuses in xt_bpf
- deal with register_shrinker() failures in sget()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix "netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'"
sget(): handle failures of register_shrinker()
mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
Linus Torvalds [Sun, 7 Jan 2018 01:05:05 +0000 (17:05 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"s390:
- Two fixes for potential bitmap overruns in the cmma migration code
x86:
- Clear guest provided GPRs to defeat the Project Zero PoC for CVE
2017-5715"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vmx: Scrub hardware GPRs at VM-exit
KVM: s390: prevent buffer overrun on memory hotplug during migration
KVM: s390: fix cmma migration for multiple memory slots
Boris Brezillon [Mon, 18 Dec 2017 10:32:45 +0000 (11:32 +0100)]
mtd: nand: pxa3xx: Fix READOOB implementation
In the current driver, OOB bytes are accessed in raw mode, and when a
page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the
driver must read the whole spare area (64 bytes in case of a 2k page,
16 bytes for a 512 page). The driver was only reading the free OOB
bytes, which was leaving some unread data in the FIFO and was somehow
leading to a timeout.
We could patch the driver to read ->spare_size + ->ecc_size instead of
just ->spare_size when READOOB is requested, but we'd better make
in-band and OOB accesses consistent.
Since the driver is always accessing in-band data in non-raw mode (with
the ECC engine enabled), we should also access OOB data in this mode.
That's particularly useful when using the BCH engine because in this
mode the free OOB bytes are also ECC protected.
Fixes: 43bcfd2bb24a ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support")
Cc: stable@vger.kernel.org
Reported-by: Sean Nyekjær <sean.nyekjaer@prevas.dk>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Richard Weinberger <richard@nod.at>
Linus Torvalds [Sat, 6 Jan 2018 17:48:27 +0000 (09:48 -0800)]
Merge tag 'powerpc-4.15-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a
mapped region. The bug was introduced in the refactoring of the page
fault handler we did in the previous release.
Thanks to John Sperbeck"
* tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
Radim Krčmář [Sat, 6 Jan 2018 16:26:37 +0000 (17:26 +0100)]
Merge tag 'kvm-s390-master-4.15-2' of git://git./linux/kernel/git/kvms390/linux
KVM: s390: fixes for cmma migration
Two fixes for potential bitmap overruns in the cmma migration
code.
Helge Deller [Fri, 5 Jan 2018 20:55:38 +0000 (21:55 +0100)]
parisc: qemu idle sleep support
Add qemu idle sleep support when running under qemu with SeaBIOS PDC
firmware.
Like the power architecture we use the "or" assembler instructions,
which translate to nops on real hardware, to indicate that qemu shall
idle sleep.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
CC: stable@vger.kernel.org # v4.9+
Linus Torvalds [Sat, 6 Jan 2018 00:45:06 +0000 (16:45 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a few driver fixups, nothing exciting"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xen-kbdfront - do not advertise multi-touch pressure support
Input: hideep - fix compile error due to missing include file
Input: elants_i2c - do not clobber interrupt trigger on x86
Input: joystick/analog - riscv has get_cycles()
Input: elantech - add new icbody type 15
Input: ims-pcu - fix typo in the error message
Linus Torvalds [Sat, 6 Jan 2018 00:17:16 +0000 (16:17 -0800)]
Merge tag 'iommu-v4.15-rc7' of git://github.com/awilliam/linux-vfio
Pull IOMMU fixes from Alex Williamson:
"Fixes via Will Deacon for arm-smmu-v3.
- Fix duplicate Stream ID handling in arm-smmu-v3
- Fix arm-smmu-v3 page table ops double free"
* tag 'iommu-v4.15-rc7' of git://github.com/awilliam/linux-vfio:
iommu/arm-smmu-v3: Cope with duplicated Stream IDs
iommu/arm-smmu-v3: Don't free page table ops twice
Linus Torvalds [Sat, 6 Jan 2018 00:06:35 +0000 (16:06 -0800)]
Merge tag 'arc-4.15-rc7' of git://git./linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- platform updates for setting up clock correctly
- fixes to accomodate newer gcc (__builtin_trap, removed inline asm
modifier)
- other fixes
* tag 'arc-4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: handle gcc generated __builtin_trap for older compiler
ARC: handle gcc generated __builtin_trap()
ARC: uaccess: dont use "l" gcc inline asm constraint modifier
ARC: [plat-axs103] refactor the quad core DT quirk code
ARC: [plat-axs103]: Set initial core pll output frequency
ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
ARC: [plat-hsdk]: Set initial core pll output frequency
ARC: [plat-hsdk] Switch DisplayLink driver from fbdev to DRM
arc: do not use __print_symbol()
ARC: Fix detection of dual-issue enabled
John Johansen [Thu, 7 Dec 2017 08:28:27 +0000 (00:28 -0800)]
apparmor: fix regression in mount mediation when feature set is pinned
When the mount code was refactored for Labels it was not correctly
updated to check whether policy supported mediation of the mount
class. This causes a regression when the kernel feature set is
reported as supporting mount and policy is pinned to a feature set
that does not support mount mediation.
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882697#41
Fixes: 2ea3ffb7782a ("apparmor: add mount mediation")
Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Linus Torvalds [Fri, 5 Jan 2018 21:02:46 +0000 (13:02 -0800)]
Merge tag 'for-4.15-rc7-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have two more fixes for 4.15, both aimed for stable.
The leak fix is obvious, the second patch fixes a bug revealed by the
refcount API, when it behaves differently than previous atomic_t and
reports refs going from 0 to 1 in one case"
* tag 'for-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes
btrfs: Fix flush bio leak
Linus Torvalds [Fri, 5 Jan 2018 20:59:32 +0000 (12:59 -0800)]
Merge tag 'xfs-4.15-fixes-10' of git://git./fs/xfs/xfs-linux
Pull XFS fixes from Darrick Wong:
"I have just a few fixes for bugs and resource cleanup problems this
week:
- Fix resource cleanup of failed quota initialization
- Fix integer overflow problems wrt s_maxbytes"
* tag 'xfs-4.15-fixes-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix s_maxbytes overflow problems
xfs: quota: check result of register_shrinker()
xfs: quota: fix missed destroy of qi_tree_lock
Linus Torvalds [Fri, 5 Jan 2018 20:56:20 +0000 (12:56 -0800)]
Merge tag 'mfd-fixes-4.15-1' of git://git./linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
"Late bugfix to plug a leak in rtsx_pcr"
* tag 'mfd-fixes-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: rtsx: Release IRQ during shutdown
Linus Torvalds [Fri, 5 Jan 2018 20:23:57 +0000 (12:23 -0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull more x86 pti fixes from Thomas Gleixner:
"Another small stash of fixes for fallout from the PTI work:
- Fix the modules vs. KASAN breakage which was caused by making
MODULES_END depend of the fixmap size. That was done when the cpu
entry area moved into the fixmap, but now that we have a separate
map space for that this is causing more issues than it solves.
- Use the proper cache flush methods for the debugstore buffers as
they are mapped/unmapped during runtime and not statically mapped
at boot time like the rest of the cpu entry area.
- Make the map layout of the cpu_entry_area consistent for 4 and 5
level paging and fix the KASLR vaddr_end wreckage.
- Use PER_CPU_EXPORT for per cpu variable and while at it unbreak
nvidia gfx drivers by dropping the GPL export. The subject line of
the commit tells it the other way around, but I noticed that too
late.
- Fix the ASM alternative macros so they can be used in the middle of
an inline asm block.
- Rename the BUG_CPU_INSECURE flag to BUG_CPU_MELTDOWN so the attack
vector is properly identified. The Spectre mitigations will come
with their own bug bits later"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN
x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm
x86/tlb: Drop the _GPL from the cpu_tlbstate export
x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers
x86/kaslr: Fix the vaddr_end mess
x86/mm: Map cpu_entry_area at the same place on 4/5 level
x86/mm: Set MODULES_END to 0xffffffffff000000
Linus Torvalds [Fri, 5 Jan 2018 20:20:35 +0000 (12:20 -0800)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI updates from Thomas Gleixner:
- A fix for a add_efi_memmap parameter regression which ensures that
the parameter is parsed before it is used.
- Reinstate the virtual capsule mapping as the cached copy turned out
to break Quark and other things
- Remove Matt Fleming as EFI co-maintainer. He stepped back a few days
ago. Thanks Matt for all your great work!
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove Matt Fleming as EFI co-maintainer
efi/capsule-loader: Reinstate virtual capsule mapping
x86/efi: Fix kernel param add_efi_memmap regression
Linus Torvalds [Fri, 5 Jan 2018 20:17:33 +0000 (12:17 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Four bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix wrongly assigned configuration data
s390: fix preemption race in disable_sacf_uaccess
s390/sclp: disable FORTIFY_SOURCE for early sclp code
s390/pci: handle insufficient resources during dma tlb flush
Linus Torvalds [Fri, 5 Jan 2018 20:15:12 +0000 (12:15 -0800)]
Merge tag 'for-linus-4.15-rc7-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"One minor fix adjusting the kmalloc flags in the new pvcalls driver
added in rc1"
* tag 'for-linus-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: use GFP_ATOMIC under spin lock
Linus Torvalds [Fri, 5 Jan 2018 20:10:06 +0000 (12:10 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- racy use of ctx->rcvused in af_alg
- algif_aead crash in chacha20poly1305
- freeing bogus pointer in pcrypt
- build error on MIPS in mpi
- memory leak in inside-secure
- memory overwrite in inside-secure
- NULL pointer dereference in inside-secure
- state corruption in inside-secure
- build error without CRYPTO_GF128MUL in chelsio
- use after free in n2"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: inside-secure - do not use areq->result for partial results
crypto: inside-secure - fix request allocations in invalidation path
crypto: inside-secure - free requests even if their handling failed
crypto: inside-secure - per request invalidation
lib/mpi: Fix umul_ppmm() for MIPS64r6
crypto: pcrypt - fix freeing pcrypt instances
crypto: n2 - cure use after free
crypto: af_alg - Fix race around ctx->rcvused by making it atomic_t
crypto: chacha20poly1305 - validate the digest size
crypto: chelsio - select CRYPTO_GF128MUL
Linus Torvalds [Fri, 5 Jan 2018 19:26:09 +0000 (11:26 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"9 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: update Mark Yao's email address
userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails
mm/sparse.c: wrong allocation for mem_section
mm/zsmalloc.c: include fs.h
mm/debug.c: provide useful debugging information for VM_BUG
kernel/exit.c: export abort() to modules
mm/mprotect: add a cond_resched() inside change_pmd_range()
kernel/acct.c: fix the acct->needcheck check in check_free_space()
mm: check pfn_valid first in zero_resv_unavail
Al Viro [Sun, 3 Dec 2017 01:20:38 +0000 (20:20 -0500)]
fix "netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'"
Descriptor table is a shared object; it's not a place where you can
stick temporary references to files, especially when we don't need
an opened file at all.
Cc: stable@vger.kernel.org # v4.14
Fixes: 98589a0998b8 ("netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jim Mattson [Wed, 3 Jan 2018 22:31:38 +0000 (14:31 -0800)]
kvm: vmx: Scrub hardware GPRs at VM-exit
Guest GPR values are live in the hardware GPRs at VM-exit. Do not
leave any guest values in hardware GPRs after the guest GPR values are
saved to the vcpu_vmx structure.
This is a partial mitigation for CVE 2017-5715 and CVE 2017-5753.
Specifically, it defeats the Project Zero PoC for CVE 2017-5715.
Suggested-by: Eric Northup <digitaleric@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Eric Northup <digitaleric@google.com>
Reviewed-by: Benjamin Serebrin <serebrin@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
[Paolo: Add AMD bits, Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Gleixner [Fri, 5 Jan 2018 14:27:34 +0000 (15:27 +0100)]
x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN
Use the name associated with the particular attack which needs page table
isolation for mitigation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Koshina <jikos@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Lutomirski <luto@amacapital.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Greg KH <gregkh@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801051525300.1724@nanos
David Woodhouse [Thu, 4 Jan 2018 14:37:05 +0000 (14:37 +0000)]
x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm
Where an ALTERNATIVE is used in the middle of an inline asm block, this
would otherwise lead to the following instruction being appended directly
to the trailing ".popsection", and a failed compile.
Fixes: 9cebed423c84 ("x86, alternative: Use .pushsection/.popsection")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: ak@linux.intel.com
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180104143710.8961-8-dwmw@amazon.co.uk
Sinan Kaya [Wed, 3 Jan 2018 12:32:45 +0000 (07:32 -0500)]
mfd: rtsx: Release IRQ during shutdown
'Commit
cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' revealed a resource leak in rtsx_pci driver during shutdown.
Issue shows up as a warning during shutdown as follows:
remove_proc_entry: removing non-empty directory 'irq/17', leaking at least
'rtsx_pci'
WARNING: CPU: 0 PID: 1578 at fs/proc/generic.c:572
remove_proc_entry+0x11d/0x130
Modules linked in <long list but none that are out-of-tree>
...
Call Trace:
unregister_irq_proc
free_desc
irq_free_descs
mp_unmap_irq
acpi_unregister_gsi_apic
acpi_pci_irq_disable
do_pci_disable_device
pci_disable_device
device_shutdown
kernel_restart
Sys_reboot
Even though rtsx_pci driver implements a shutdown callback, it is not
releasing the interrupt that it registered during probe. This is causing
the ACPI layer to complain that the shared IRQ is in use while freeing
IRQ.
This code releases the IRQ to prevent resource leak and eliminate the
warning.
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198141
Reported-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Torvalds [Fri, 5 Jan 2018 02:02:55 +0000 (18:02 -0800)]
Merge tag 'drm-fixes-for-v4.15-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just collecting some fixes to finish my hoildays :-).
A few fixes for i915 (one documentation build fix), one ttm fix, one
AMD display fix, one omapdrm fix, and a set of armada fixes from
Russell.
All seem pretty small, you can now return to your latest security news
site"
* tag 'drm-fixes-for-v4.15-rc7' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
drm/ttm: check the return value of kzalloc
drm/amd/display: call set csc_default if enable adjustment is false
docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c
omapdrm/dss/hdmi4_cec: fix interrupt handling
documentation/gpu/i915: fix docs build error after file rename
drm/i915: Put all non-blocking modesets onto an ordered wq
drm/i915: Disable DC states around GMBUS on GLK
drm/i915/psr: Fix register name mess up.
drm/armada: fix YUV planar format framebuffer offsets
drm/armada: improve efficiency of armada_drm_plane_calc_addrs()
drm/armada: fix UV swap code
drm/armada: fix SRAM powerdown
drm/armada: fix leak of crtc structure
Jeffy Chen [Fri, 5 Jan 2018 00:18:12 +0000 (16:18 -0800)]
mailmap: update Mark Yao's email address
Change the previous employers email addresses to the current email
address.
Link: http://lkml.kernel.org/r/20171229121726.31589-1-jeffy.chen@rock-chips.com
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Fri, 5 Jan 2018 00:18:09 +0000 (16:18 -0800)]
userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails
The previous fix in commit
384632e67e08 ("userfaultfd: non-cooperative:
fix fork use after free") corrected the refcounting in case of
UFFD_EVENT_FORK failure for the fork userfault paths.
That still didn't clear the vma->vm_userfaultfd_ctx of the vmas that
were set to point to the aborted new uffd ctx earlier in
dup_userfaultfd.
Link: http://lkml.kernel.org/r/20171223002505.593-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Fri, 5 Jan 2018 00:18:06 +0000 (16:18 -0800)]
mm/sparse.c: wrong allocation for mem_section
In commit
83e3c48729d9 ("mm/sparsemem: Allocate mem_section at runtime
for CONFIG_SPARSEMEM_EXTREME=y") mem_section is allocated at runtime to
save memory.
It allocates the first dimension of array with sizeof(struct mem_section).
It costs extra memory, should be sizeof(struct mem_section *).
Fix it.
Link: http://lkml.kernel.org/r/1513932498-20350-1-git-send-email-bhe@redhat.com
Fixes: 83e3c48729 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergey Senozhatsky [Fri, 5 Jan 2018 00:18:02 +0000 (16:18 -0800)]
mm/zsmalloc.c: include fs.h
`struct file_system_type' and alloc_anon_inode() function are defined in
fs.h, include it directly.
Link: http://lkml.kernel.org/r/20171219104219.3017-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Fri, 5 Jan 2018 00:17:59 +0000 (16:17 -0800)]
mm/debug.c: provide useful debugging information for VM_BUG
With the recent addition of hashed kernel pointers, places which need to
produce useful debug output have to specify %px, not %p. This patch
fixes all the VM debug to use %px. This is appropriate because it's
debug output that the user should never be able to trigger, and kernel
developers need to see the actual pointers.
Link: http://lkml.kernel.org/r/20171219133236.GE13680@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Fri, 5 Jan 2018 00:17:56 +0000 (16:17 -0800)]
kernel/exit.c: export abort() to modules
gcc -fisolate-erroneous-paths-dereference can generate calls to abort()
from modular code too.
[arnd@arndb.de: drop duplicate exports of abort()]
Link: http://lkml.kernel.org/r/20180102103311.706364-1-arnd@arndb.de
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anshuman Khandual [Fri, 5 Jan 2018 00:17:52 +0000 (16:17 -0800)]
mm/mprotect: add a cond_resched() inside change_pmd_range()
While testing on a large CPU system, detected the following RCU stall
many times over the span of the workload. This problem is solved by
adding a cond_resched() in the change_pmd_range() function.
INFO: rcu_sched detected stalls on CPUs/tasks:
154-....: (670 ticks this GP) idle=022/
140000000000000/0 softirq=2825/2825 fqs=612
(detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864)
Sending NMI from CPU 955 to CPUs 154:
NMI backtrace for cpu 154
CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3
NIP:
c0000000000b3f64 LR:
c0000000000b33d4 CTR:
000000000000aa18
REGS:
00000000a4b0fb44 TRAP: 0501 Not tainted (4.15.0-rc3+)
MSR:
8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR:
22422082 XER:
00000000
CFAR:
00000000006cf8f0 SOFTE: 1
GPR00:
0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000
GPR04:
8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00
GPR08:
8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00
GPR12:
ffffffffffffffff c00000000fb25100
NIP [
c0000000000b3f64] plpar_hcall9+0x44/0x7c
LR [
c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420
Call Trace:
flush_hash_range+0x48/0x100
__flush_tlb_pending+0x44/0xd0
hpte_need_flush+0x408/0x470
change_protection_range+0xaac/0xf10
change_prot_numa+0x30/0xb0
task_numa_work+0x2d0/0x3e0
task_work_run+0x130/0x190
do_notify_resume+0x118/0x120
ret_from_except_lite+0x70/0x74
Instruction dump:
60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378
e9410060 e9610068 e9810070 44000022 <
7d806378>
e9810028 f88c0000 f8ac0008
Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Fri, 5 Jan 2018 00:17:49 +0000 (16:17 -0800)]
kernel/acct.c: fix the acct->needcheck check in check_free_space()
As Tsukada explains, the time_is_before_jiffies(acct->needcheck) check
is very wrong, we need time_is_after_jiffies() to make sys_acct() work.
Ignoring the overflows, the code should "goto out" if needcheck >
jiffies, while currently it checks "needcheck < jiffies" and thus in the
likely case check_free_space() does nothing until jiffies overflow.
In particular this means that sys_acct() is simply broken, acct_on()
sets acct->needcheck = jiffies and expects that check_free_space()
should set acct->active = 1 after the free-space check, but this won't
happen if jiffies increments in between.
This was broken by commit
32dc73086015 ("get rid of timer in
kern/acct.c") in 2011, then another (correct) commit
795a2f22a8ea
("acct() should honour the limits from the very beginning") made the
problem more visible.
Link: http://lkml.kernel.org/r/20171213133940.GA6554@redhat.com
Fixes: 32dc73086015 ("get rid of timer in kern/acct.c")
Reported-by: TSUKADA Koutaro <tsukada@ascade.co.jp>
Suggested-by: TSUKADA Koutaro <tsukada@ascade.co.jp>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Young [Fri, 5 Jan 2018 00:17:45 +0000 (16:17 -0800)]
mm: check pfn_valid first in zero_resv_unavail
With latest kernel I get below bug while testing kdump:
BUG: unable to handle kernel paging request at
ffffea00034b1040
IP: zero_resv_unavail+0xbd/0x126
PGD
37b98067 P4D
37b98067 PUD
37b97067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.15.0-rc1+ #316
Hardware name: LENOVO 20ARS1BJ02/20ARS1BJ02, BIOS GJET92WW (2.42 ) 03/03/2017
task:
ffffffff81a0e4c0 task.stack:
ffffffff81a00000
RIP: 0010:zero_resv_unavail+0xbd/0x126
RSP: 0000:
ffffffff81a03d88 EFLAGS:
00010006
RAX:
0000000000000000 RBX:
ffffea00034b1040 RCX:
0000000000000010
RDX:
0000000000000000 RSI:
0000000000000092 RDI:
ffffea00034b1040
RBP:
00000000000d2c41 R08:
00000000000000c0 R09:
0000000000000a0d
R10:
0000000000000002 R11:
0000000000007f01 R12:
ffffffff81a03d90
R13:
ffffea0000000000 R14:
0000000000000063 R15:
0000000000000062
FS:
0000000000000000(0000) GS:
ffffffff81c73000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffea00034b1040 CR3:
0000000037609000 CR4:
00000000000606b0
Call Trace:
? free_area_init_nodes+0x640/0x664
? zone_sizes_init+0x58/0x72
? setup_arch+0xb50/0xc6c
? start_kernel+0x64/0x43d
? secondary_startup_64+0xa5/0xb0
Code: c1 e8 0c 48 39 d8 76 27 48 89 de 48 c1 e3 06 48 c7 c7 7a 87 79 81 e8 b0 c0 3e ff 4c 01 eb b9 10 00 00 00 31 c0 48 89 df 49 ff c6 <f3> ab eb bc 6a 00 49 c7 c0 f0 93 d1 81 31 d2 83 ce ff 41 54 49
RIP: zero_resv_unavail+0xbd/0x126 RSP:
ffffffff81a03d88
CR2:
ffffea00034b1040
---[ end trace
f5ba9e8f73c7ee26 ]---
This is introduced by commit
a4a3ede2132a ("mm: zero reserved and
unavailable struct pages").
The reason is some efi reserved boot ranges is not reported in E820 ram.
In my case it is a bgrt buffer:
efi: mem00: [Boot Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000d2c41000-0x00000000d2c85fff] (0MB)
Use "add_efi_memmap" can workaround the problem with another fix:
http://lkml.kernel.org/r/
20171130052327.GA3500@dhcp-128-65.nay.redhat.com
In zero_resv_unavail it would be better to check pfn_valid first before
zero the page struct. This fixes the problem and potential other
similar problems. Also as Pavel Tatashin suggested checks pfn_valid at
the beginning of the section.
The range is backed by real memory. The memory range is efi "Boot
Service Data", that means after ExitBootServices() these ranges can be
used as system ram. But some of them need to be reserved, for example
the bgrt image address in an acpi table, if the image memory is freed
then kexec reboot will fail because kexec inherit same acpi table to
initialize the driver.
Link: http://lkml.kernel.org/r/20171201095048.GA3084@dhcp-128-65.nay.redhat.com
Fixes: a4a3ede2132a ("mm: zero reserved and unavailable struct pages")
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Thu, 4 Jan 2018 21:19:04 +0000 (22:19 +0100)]
x86/tlb: Drop the _GPL from the cpu_tlbstate export
The recent changes for PTI touch cpu_tlbstate from various tlb_flush
inlines. cpu_tlbstate is exported as GPL symbol, so this causes a
regression when building out of tree drivers for certain graphics cards.
Aside of that the export was wrong since it was introduced as it should
have been EXPORT_PER_CPU_SYMBOL_GPL().
Use the correct PER_CPU export and drop the _GPL to restore the previous
state which allows users to utilize the cards they payed for.
As always I'm really thrilled to make this kind of change to support the
#friends (or however the hot hashtag of today is spelled) from that closet
sauce graphics corp.
Fixes: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")
Fixes: 6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches")
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Peter Zijlstra [Thu, 4 Jan 2018 17:07:12 +0000 (18:07 +0100)]
x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers
Thomas reported the following warning:
BUG: using smp_processor_id() in preemptible [
00000000] code: ovsdb-server/4498
caller is native_flush_tlb_single+0x57/0xc0
native_flush_tlb_single+0x57/0xc0
__set_pte_vaddr+0x2d/0x40
set_pte_vaddr+0x2f/0x40
cea_set_pte+0x30/0x40
ds_update_cea.constprop.4+0x4d/0x70
reserve_ds_buffers+0x159/0x410
x86_reserve_hardware+0x150/0x160
x86_pmu_event_init+0x3e/0x1f0
perf_try_init_event+0x69/0x80
perf_event_alloc+0x652/0x740
SyS_perf_event_open+0x3f6/0xd60
do_syscall_64+0x5c/0x190
set_pte_vaddr is used to map the ds buffers into the cpu entry area, but
there are two problems with that:
1) The resulting flush is not supposed to be called in preemptible context
2) The cpu entry area is supposed to be per CPU, but the debug store
buffers are mapped for all CPUs so these mappings need to be flushed
globally.
Add the necessary preemption protection across the mapping code and flush
TLBs globally.
Fixes: c1961a4631da ("x86/events/intel/ds: Map debug buffers in cpu_entry_area")
Reported-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180104170712.GB3040@hirez.programming.kicks-ass.net
Thomas Gleixner [Thu, 4 Jan 2018 11:32:03 +0000 (12:32 +0100)]
x86/kaslr: Fix the vaddr_end mess
vaddr_end for KASLR is only documented in the KASLR code itself and is
adjusted depending on config options. So it's not surprising that a change
of the memory layout causes KASLR to have the wrong vaddr_end. This can map
arbitrary stuff into other areas causing hard to understand problems.
Remove the whole ifdef magic and define the start of the cpu_entry_area to
be the end of the KASLR vaddr range.
Add documentation to that effect.
Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Reported-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>,
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801041320360.1771@nanos
Dave Airlie [Thu, 4 Jan 2018 23:25:01 +0000 (09:25 +1000)]
Merge tag 'drm-intel-fixes-2018-01-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v4.15-rc7
- couple of documentation build fixes
- serialize non-blocking modesets
- prevent DMC from messing up GMBUS transfers
- PSR regression fix
* tag 'drm-intel-fixes-2018-01-04' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c
documentation/gpu/i915: fix docs build error after file rename
drm/i915: Put all non-blocking modesets onto an ordered wq
drm/i915: Disable DC states around GMBUS on GLK
drm/i915/psr: Fix register name mess up.
Dave Airlie [Thu, 4 Jan 2018 23:24:26 +0000 (09:24 +1000)]
Merge branch 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- backport of a DC change which fixes a greenish tint on some RV hw
- properly handle kzalloc fail in ttm
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: check the return value of kzalloc
drm/amd/display: call set csc_default if enable adjustment is false
Dave Airlie [Thu, 4 Jan 2018 23:24:05 +0000 (09:24 +1000)]
Merge branch 'drm-armada-fixes-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-fixes
Armada fixes.
* 'drm-armada-fixes-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm:
drm/armada: fix YUV planar format framebuffer offsets
drm/armada: improve efficiency of armada_drm_plane_calc_addrs()
drm/armada: fix UV swap code
drm/armada: fix SRAM powerdown
drm/armada: fix leak of crtc structure
Dave Airlie [Thu, 4 Jan 2018 23:23:35 +0000 (09:23 +1000)]
Merge tag 'omapdrm-4.15-fixes' of git://git./linux/kernel/git/tomba/linux into drm-fixes
omapdrm fixes for 4.15
* Fix OMAP4 HDMI CEC interrupt handling and a possible buffer overflow
* tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
omapdrm/dss/hdmi4_cec: fix interrupt handling
Thomas Gleixner [Thu, 4 Jan 2018 12:01:40 +0000 (13:01 +0100)]
x86/mm: Map cpu_entry_area at the same place on 4/5 level
There is no reason for 4 and 5 level pagetables to have a different
layout. It just makes determining vaddr_end for KASLR harder than
necessary.
Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>,
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801041320360.1771@nanos
Andrey Ryabinin [Thu, 28 Dec 2017 16:06:20 +0000 (19:06 +0300)]
x86/mm: Set MODULES_END to 0xffffffffff000000
Since
f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
kasan_mem_to_shadow(MODULES_END) could be not aligned to a page boundary.
So passing page unaligned address to kasan_populate_zero_shadow() have two
possible effects:
1) It may leave one page hole in supposed to be populated area. After commit
21506525fb8d ("x86/kasan/64: Teach KASAN about the cpu_entry_area") that
hole happens to be in the shadow covering fixmap area and leads to crash:
BUG: unable to handle kernel paging request at
fffffbffffe8ee04
RIP: 0010:check_memory_region+0x5c/0x190
Call Trace:
<NMI>
memcpy+0x1f/0x50
ghes_copy_tofrom_phys+0xab/0x180
ghes_read_estatus+0xfb/0x280
ghes_notify_nmi+0x2b2/0x410
nmi_handle+0x115/0x2c0
default_do_nmi+0x57/0x110
do_nmi+0xf8/0x150
end_repeat_nmi+0x1a/0x1e
Note, the crash likely disappeared after commit
92a0f81d8957, which
changed kasan_populate_zero_shadow() call the way it was before
commit
21506525fb8d.
2) Attempt to load module near MODULES_END will fail, because
__vmalloc_node_range() called from kasan_module_alloc() will hit the
WARN_ON(!pte_none(*pte)) in the vmap_pte_range() and bail out with error.
To fix this we need to make kasan_mem_to_shadow(MODULES_END) page aligned
which means that MODULES_END should be 8*PAGE_SIZE aligned.
The whole point of commit
f06bdd4001c2 was to move MODULES_END down if
NR_CPUS is big, so the cpu_entry_area takes a lot of space.
But since
92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
the cpu_entry_area is no longer in fixmap, so we could just set
MODULES_END to a fixed 8*PAGE_SIZE aligned address.
Fixes: f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Link: https://lkml.kernel.org/r/20171228160620.23818-1-aryabinin@virtuozzo.com
Linus Torvalds [Thu, 4 Jan 2018 19:14:36 +0000 (11:14 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Fixes this time include mostly device tree changes, as usual, the
notable ones include:
- A number of patches to fix most of the remaining DTC warnings that
got introduced when DTC started warning about some obvious
mistakes. We still have some remaining warnings that probably may
have to wait until 4.16 to get fixed while we try to figure out
what the correct contents should be.
- On Allwinner A64, Ethernet PHYs need a fix after a mistake in
coordination between patches merged through multiple branches.
- Various fixes for PMICs on allwinner based boards
- Two fixes for ethernet link detection on some Renesas machines
- Two stability fixes for rockchip based boards
Aside from device-tree, two other areas got fixes for older problems:
- For TI Davinci DM365, a couple of fixes were needed to repair the
MMC DMA engine support, apparently this has been broken for a
while.
- One important fix for all Allwinner chips with the PMIC driver as a
loadable module"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
arm64: dts: uniphier: fix gpio-ranges property of PXs3 SoC
arm64: dts: renesas: ulcb: Remove renesas, no-ether-link property
arm64: dts: renesas: salvator-x: Remove renesas, no-ether-link property
ARM: dts: tango4: remove bogus interrupt-controller property
ARM: dts: ls1021a: fix incorrect clock references
ARM: dts: aspeed-g4: Correct VUART IRQ number
ARM: dts: exynos: Enable Mixer node for Exynos5800 Peach Pi machine
ARM: dts: sun8i: a711: Reinstate the PMIC compatible
ARM: davinci: fix mmc entries in dm365's dma_slave_map
ARM: dts: da850-lego-ev3: Fix battery voltage gpio
ARM: davinci: Add dma_mask to dm365's eDMA device
ARM: davinci: Use platform_device_register_full() to create pdev for dm365's eDMA
arm64: dts: rockchip: limit rk3328-rock64 gmac speed to 100MBit for now
arm64: dts: rockchip: remove vdd_log from rk3399-puma
arm64: dts: orange-pi-zero-plus2: fix sdcard detect
arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3
ARM: dts: sunxi: Convert to CCU index macros for HDMI controller
sunxi-rsb: Include OF based modalias in device uevent
ARM: dts: at91: disable the nxp,se97b SMBUS timeout on the TSE-850
arm64: dts: rockchip: fix trailing 0 in rk3328 tsadc interrupts
...
Masahiro Yamada [Fri, 29 Dec 2017 12:15:54 +0000 (21:15 +0900)]
arm64: dts: uniphier: fix gpio-ranges property of PXs3 SoC
This is probably a copy-paste mistake. The gpio-ranges of PXs3 is
different from that of LD20.
Fixes: 277b51e7050f ("arm64: dts: uniphier: add GPIO controller nodes")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 4 Jan 2018 16:06:25 +0000 (17:06 +0100)]
Merge tag 'sunxi-fixes-for-4.15' of ssh://gitolite./linux/kernel/git/sunxi/linux into fixes
Pull "Allwinner fixes for 4.15" from Chen-Yu Tsai:
First, one fix that adds proper regulator references for the EMAC
external PHYs on A64 boards. The EMAC bindings were developed for 4.13,
but reverted at the last minute. They were finalized and brought back
for 4.15. However in the time between, regulator support for the A64
boards was merged. When EMAC device tree changes were reintroduced,
this was not taken into account.
Second, a patch that adds OF based modalias uevent for RSB slave devices.
This has been missing since the introduction of RSB, and recently with
PMIC regulator support introduced for the A64, has been seen affecting
distributions, which have the all-important PMIC mfd drivers built as
modules, which then don't get loaded.
Other minor cleanups include final conversion of raw indices to CCU
binding macros for sun[4567]i HDMI, cleanup of dummy regulators on the
A64 SOPINE, a SD card detection polarity fix for the Orange Pi Zero
Plus2, and adding a missing compatible for the PMIC on the TBS A711
tablet.
* tag 'sunxi-fixes-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a711: Reinstate the PMIC compatible
arm64: dts: orange-pi-zero-plus2: fix sdcard detect
arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3
ARM: dts: sunxi: Convert to CCU index macros for HDMI controller
sunxi-rsb: Include OF based modalias in device uevent
arm64: allwinner: a64: add Ethernet PHY regulator for several boards
Arnd Bergmann [Thu, 4 Jan 2018 16:05:06 +0000 (17:05 +0100)]
Merge tag 'renesas-fixes-for-v4.15' of ssh://gitolite./linux/kernel/git/horms/renesas into fixes
Pull "Renesas ARM Based SoC Fixes for v4.15" from Simon Horman:
Vladimir Zapolskiy says:
The present change is a bug fix for AVB link iteratively up/down.
Steps to reproduce:
- start AVB TX stream (Using aplay via MSE),
- disconnect+reconnect the eth cable,
- after a reconnection the eth connection goes iteratively up/down
without user interaction,
- this may heal after some seconds or even stay for minutes.
As the documentation specifies, the "renesas,no-ether-link" option
should be used when a board does not provide a proper AVB_LINK signal.
There is no need for this option enabled on RCAR H3/M3 Salvator-X/XS
and ULCB starter kits since the AVB_LINK is correctly handled by HW.
Choosing to keep or remove the "renesas,no-ether-link" option will
have impact on the code flow in the following ways:
- keeping this option enabled may lead to unexpected behavior since
the RX & TX are enabled/disabled directly from adjust_link function
without any HW interrogation,
- removing this option, the RX & TX will only be enabled/disabled after
HW interrogation. The HW check is made through the LMON pin in PSR
register which specifies AVB_LINK signal value (0 - at low level;
1 - at high level).
In conclusion, the change is also a safety improvement because it
removes the "renesas,no-ether-link" option leading to a proper way
of detecting the link state based on HW interrogation and not on
software heuristic.
Note that DTS files for V3M Starter Kit, Draak and Eagle boards
contain the same property, the files are untouched due to unavailable
schematics to verify if the fix applies to these boards as well.
* tag 'renesas-fixes-for-v4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: ulcb: Remove renesas, no-ether-link property
arm64: dts: renesas: salvator-x: Remove renesas, no-ether-link property
Lucas De Marchi [Tue, 2 Jan 2018 20:18:37 +0000 (12:18 -0800)]
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
Display WA #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
enabling or in previous enabling."
This workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly, although
they were expecting the DPLL0 link rate to be unchanged on
runtime.
We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency with small
differences.
This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204232210.4958-1-lucas.demarchi@intel.com
(cherry picked from commit
53421c2fe99ce16838639ad89d772d914a119a49)
[ Lucas: Backport to 4.15 adding back variable that has been removed on
commits not meant to be backported ]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102201837.6812-1-lucas.demarchi@intel.com
Linus Torvalds [Thu, 4 Jan 2018 00:41:07 +0000 (16:41 -0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 page table isolation fixes from Thomas Gleixner:
"A couple of urgent fixes for PTI:
- Fix a PTE mismatch between user and kernel visible mapping of the
cpu entry area (differs vs. the GLB bit) and causes a TLB mismatch
MCE on older AMD K8 machines
- Fix the misplaced CR3 switch in the SYSCALL compat entry code which
causes access to unmapped kernel memory resulting in double faults.
- Fix the section mismatch of the cpu_tss_rw percpu storage caused by
using a different mechanism for declaration and definition.
- Two fixes for dumpstack which help to decode entry stack issues
better
- Enable PTI by default in Kconfig. We should have done that earlier,
but it slipped through the cracks.
- Exclude AMD from the PTI enforcement. Not necessarily a fix, but if
AMD is so confident that they are not affected, then we should not
burden users with the overhead"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/process: Define cpu_tss_rw in same section as declaration
x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat()
x86/dumpstack: Print registers for first stack frame
x86/dumpstack: Fix partial register dumps
x86/pti: Make sure the user/kernel PTEs match
x86/cpu, x86/pti: Do not enable PTI on AMD processors
x86/pti: Enable PTI by default
Nick Desaulniers [Wed, 3 Jan 2018 20:39:52 +0000 (12:39 -0800)]
x86/process: Define cpu_tss_rw in same section as declaration
cpu_tss_rw is declared with DECLARE_PER_CPU_PAGE_ALIGNED
but then defined with DEFINE_PER_CPU_SHARED_ALIGNED
leading to section mismatch warnings.
Use DEFINE_PER_CPU_PAGE_ALIGNED consistently. This is necessary because
it's mapped to the cpu entry area and must be page aligned.
[ tglx: Massaged changelog a bit ]
Fixes: 1a935bc3d4ea ("x86/entry: Move SYSENTER_stack to the beginning of struct tss_struct")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: thomas.lendacky@amd.com
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: tklauser@distanz.ch
Cc: minipli@googlemail.com
Cc: me@kylehuey.com
Cc: namit@vmware.com
Cc: luto@kernel.org
Cc: jpoimboe@redhat.com
Cc: tj@kernel.org
Cc: cl@linux.com
Cc: bp@suse.de
Cc: thgarnie@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180103203954.183360-1-ndesaulniers@google.com
Thomas Gleixner [Wed, 3 Jan 2018 18:52:04 +0000 (19:52 +0100)]
x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat()
The preparation for PTI which added CR3 switching to the entry code
misplaced the CR3 switch in entry_SYSCALL_compat().
With PTI enabled the entry code tries to access a per cpu variable after
switching to kernel GS. This fails because that variable is not mapped to
user space. This results in a double fault and in the worst case a kernel
crash.
Move the switch ahead of the access and clobber RSP which has been saved
already.
Fixes: 8a09317b895f ("x86/mm/pti: Prepare the x86/entry assembly code for entry/exit CR3 switching")
Reported-by: Lars Wendler <wendler.lars@web.de>
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>,
Cc: Dave Hansen <dave.hansen@linux.intel.com>,
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Greg KH <gregkh@linuxfoundation.org>, ,
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Cc: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801031949200.1957@nanos
Linus Torvalds [Wed, 3 Jan 2018 19:03:07 +0000 (11:03 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull pid allocation bug fix from Eric Biederman:
"The replacement of the pid hash table and the pid bitmap with an idr
resulted in an implementation that now fails more often in low memory
situations. Allowing fuzzers to observe bad behavior from a memory
allocation failure during pid allocation.
This is a small change to fix this by making the kernel more robust in
the case of error. The non-error paths are left alone so the only
danger is to the already broken error path. I have manually injected
errors and verified that this new error handling works"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
pid: Handle failure to allocate the first pid in a pid namespace
Linus Torvalds [Wed, 3 Jan 2018 18:58:56 +0000 (10:58 -0800)]
Merge branch 'afs-fixes' of git://git./linux/kernel/git/dhowells/linux-fs
Pull afs/fscache fixes from David Howells:
- Fix the default return of fscache_maybe_release_page() when a cache
isn't in use - it prevents a filesystem from releasing pages. This
can cause a system to OOM.
- Fix a potential uninitialised variable in AFS.
- Fix AFS unlink's handling of the nlink count. It needs to use the
nlink manipulation functions so that inode structs of deleted inodes
actually get scheduled for destruction.
- Fix error handling in afs_write_end() so that the page gets unlocked
and put if we can't fill the unwritten portion.
* 'afs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix missing error handling in afs_write_end()
afs: Fix unlink
afs: Potential uninitialized variable in afs_extract_data()
fscache: Fix the default for fscache_maybe_release_page()
Linus Torvalds [Wed, 3 Jan 2018 18:56:06 +0000 (10:56 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull capabilities fix from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
capabilities: fix buffer overread on very short xattr
Kees Cook [Tue, 2 Jan 2018 23:21:33 +0000 (15:21 -0800)]
exec: Weaken dumpability for secureexec
This is a logical revert of commit
e37fdb785a5f ("exec: Use secureexec
for setting dumpability")
This weakens dumpability back to checking only for uid/gid changes in
current (which is useless), but userspace depends on dumpability not
being tied to secureexec.
https://bugzilla.redhat.com/show_bug.cgi?id=
1528633
Reported-by: Tom Horsley <horsley1953@gmail.com>
Fixes: e37fdb785a5f ("exec: Use secureexec for setting dumpability")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josh Poimboeuf [Sun, 31 Dec 2017 16:18:07 +0000 (10:18 -0600)]
x86/dumpstack: Print registers for first stack frame
In the stack dump code, if the frame after the starting pt_regs is also
a regs frame, the registers don't get printed. Fix that.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable@vger.kernel.org
Fixes: 3b3fa11bc700 ("x86/dumpstack: Print any pt_regs found on the stack")
Link: http://lkml.kernel.org/r/396f84491d2f0ef64eda4217a2165f5712f6a115.1514736742.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Sun, 31 Dec 2017 16:18:06 +0000 (10:18 -0600)]
x86/dumpstack: Fix partial register dumps
The show_regs_safe() logic is wrong. When there's an iret stack frame,
it prints the entire pt_regs -- most of which is random stack data --
instead of just the five registers at the end.
show_regs_safe() is also poorly named: the on_stack() checks aren't for
safety. Rename the function to show_regs_if_on_stack() and add a
comment to explain why the checks are needed.
These issues were introduced with the "partial register dump" feature of
the following commit:
b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully")
That patch had gone through a few iterations of development, and the
above issues were artifacts from a previous iteration of the patch where
'regs' pointed directly to the iret frame rather than to the (partially
empty) pt_regs.
Tested-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable@vger.kernel.org
Fixes: b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully")
Link: http://lkml.kernel.org/r/5b05b8b344f59db2d3d50dbdeba92d60f2304c54.1514736742.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Wed, 3 Jan 2018 14:57:59 +0000 (15:57 +0100)]
x86/pti: Make sure the user/kernel PTEs match
Meelis reported that his K8 Athlon64 emits MCE warnings when PTI is
enabled:
[Hardware Error]: Error Addr: 0x0000ffff81e000e0
[Hardware Error]: MC1 Error: L1 TLB multimatch.
[Hardware Error]: cache level: L1, tx: INSN
The address is in the entry area, which is mapped into kernel _AND_ user
space. That's special because we switch CR3 while we are executing
there.
User mapping:
0xffffffff81e00000-0xffffffff82000000 2M ro PSE GLB x pmd
Kernel mapping:
0xffffffff81000000-0xffffffff82000000 16M ro PSE x pmd
So the K8 is complaining that the TLB entries differ. They differ in the
GLB bit.
Drop the GLB bit when installing the user shared mapping.
Fixes: 6dc72c3cbca0 ("x86/mm/pti: Share entry text PMD")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Meelis Roos <mroos@linux.ee>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801031407180.1957@nanos
Tom Lendacky [Wed, 27 Dec 2017 05:43:54 +0000 (23:43 -0600)]
x86/cpu, x86/pti: Do not enable PTI on AMD processors
AMD processors are not subject to the types of attacks that the kernel
page table isolation feature protects against. The AMD microarchitecture
does not allow memory references, including speculative references, that
access higher privileged data when running in a lesser privileged mode
when that access would result in a page fault.
Disable page table isolation by default on AMD processors by not setting
the X86_BUG_CPU_INSECURE feature, which controls whether X86_FEATURE_PTI
is set.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171227054354.20369.94587.stgit@tlendack-t1.amdoffice.net
Thomas Gleixner [Wed, 3 Jan 2018 14:18:44 +0000 (15:18 +0100)]
x86/pti: Enable PTI by default
This really want's to be enabled by default. Users who know what they are
doing can disable it either in the config or on the kernel command line.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Matt Fleming [Wed, 3 Jan 2018 09:44:17 +0000 (09:44 +0000)]
MAINTAINERS: Remove Matt Fleming as EFI co-maintainer
Instate Ard Biesheuvel as the sole EFI maintainer and leave other folks
as maintainers for the EFI test driver and efivarfs file system.
Also add Ard Biesheuvel as the EFI test driver and efivarfs maintainer.
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ivan Hu <ivan.hu@canonical.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180103094417.6353-1-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ard Biesheuvel [Tue, 2 Jan 2018 17:21:10 +0000 (17:21 +0000)]
efi/capsule-loader: Reinstate virtual capsule mapping
Commit:
82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header")
... refactored the capsule loading code that maps the capsule header,
to avoid having to map it several times.
However, as it turns out, the vmap() call we ended up removing did not
just map the header, but the entire capsule image, and dropping this
virtual mapping breaks capsules that are processed by the firmware
immediately (i.e., without a reboot).
Unfortunately, that change was part of a larger refactor that allowed
a quirk to be implemented for Quark, which has a non-standard memory
layout for capsules, and we have slightly painted ourselves into a
corner by allowing quirk code to mangle the capsule header and memory
layout.
So we need to fix this without breaking Quark. Fortunately, Quark does
not appear to care about the virtual mapping, and so we can simply
do a partial revert of commit:
2a457fb31df6 ("efi/capsule-loader: Use page addresses rather than struct page pointers")
... and create a vmap() mapping of the entire capsule (including header)
based on the reinstated struct page array, unless running on Quark, in
which case we pass the capsule header copy as before.
Reported-by: Ge Song <ge.song@hxt-semitech.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Tested-by: Ge Song <ge.song@hxt-semitech.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header")
Link: http://lkml.kernel.org/r/20180102172110.17018-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Young [Tue, 2 Jan 2018 17:21:09 +0000 (17:21 +0000)]
x86/efi: Fix kernel param add_efi_memmap regression
'add_efi_memmap' is an early param, but do_add_efi_memmap() has no
chance to run because the code path is before parse_early_param().
I believe it worked when the param was introduced but probably later
some other changes caused the wrong order and nobody noticed it.
Move efi_memblock_x86_reserve_range() after parse_early_param()
to fix it.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Ge Song <ge.song@hxt-semitech.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180102172110.17018-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vineet Gupta [Fri, 8 Dec 2017 16:45:57 +0000 (08:45 -0800)]
ARC: handle gcc generated __builtin_trap for older compiler
ARC gcc prior to GNU 2018.03 release didn't have a target specific
__builtin_trap() implementation, generating default abort() call.
Implement the abort() call - emulating what newer gcc does for the same,
as suggested by Arnd.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Helge Deller [Tue, 2 Jan 2018 19:36:44 +0000 (20:36 +0100)]
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
Qemu for PARISC reported on a 32bit SMP parisc kernel strange failures
about "Not-handled unaligned insn 0x0e8011d6 and 0x0c2011c9."
Those opcodes evaluate to the ldcw() assembly instruction which requires
(on 32bit) an alignment of 16 bytes to ensure atomicity.
As it turns out, qemu is correct and in our assembly code in entry.S and
pacache.S we don't pay attention to the required alignment.
This patch fixes the problem by aligning the lock offset in assembly
code in the same manner as we do in our C-code.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.0+
Helge Deller [Tue, 2 Jan 2018 19:47:01 +0000 (20:47 +0100)]
parisc: Show unhashed EISA EEPROM address
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Tue, 2 Jan 2018 19:45:42 +0000 (20:45 +0100)]
parisc: Show unhashed HPA of Dino chip
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Tue, 2 Jan 2018 19:42:59 +0000 (20:42 +0100)]
parisc: Show initial kernel memory layout unhashed
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Tue, 2 Jan 2018 19:40:21 +0000 (20:40 +0100)]
parisc: Show unhashed hardware inventory
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Helge Deller <deller@gmx.de>
Xiongwei Song [Tue, 2 Jan 2018 13:24:55 +0000 (21:24 +0800)]
drm/ttm: check the return value of kzalloc
In the function ttm_page_alloc_init, kzalloc call is made for variable
_manager, we need to check its return value, it may return NULL.
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yue Hin Lau [Fri, 29 Dec 2017 11:11:18 +0000 (11:11 +0000)]
drm/amd/display: call set csc_default if enable adjustment is false
Fixes a greenish tint on RV displays.
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[drake@endlessm.com: backport to 4.15]
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Darrick J. Wong [Fri, 22 Dec 2017 21:14:34 +0000 (13:14 -0800)]
xfs: fix s_maxbytes overflow problems
Fix some integer overflow problems if offset + count happen to be large
enough to cause an integer overflow.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Aliaksei Karaliou [Thu, 21 Dec 2017 21:18:26 +0000 (13:18 -0800)]
xfs: quota: check result of register_shrinker()
xfs_qm_init_quotainfo() does not check result of register_shrinker()
which was tagged as __must_check recently, reported by sparse.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
[darrick: move xfs_qm_destroy_quotainos nearer xfs_qm_init_quotainos]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Aliaksei Karaliou [Thu, 21 Dec 2017 21:18:26 +0000 (13:18 -0800)]
xfs: quota: fix missed destroy of qi_tree_lock
xfs_qm_destroy_quotainfo() does not destroy quotainfo->qi_tree_lock
while destroys quotainfo->qi_quotaofflock.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Oleksandr Andrushchenko [Tue, 2 Jan 2018 17:39:25 +0000 (09:39 -0800)]
Input: xen-kbdfront - do not advertise multi-touch pressure support
Some user-space applications expect multi-touch pressure
on contact to be reported if it is advertised in device
properties. Otherwise, such applications may treat reports
not as actual touches, but hovering. Currently this is
only advertised, but not reported.
Fix this by not advertising that ABS_MT_PRESSURE is supported.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Patchwork-Id:
10140017
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Chris Mason [Fri, 15 Dec 2017 19:58:27 +0000 (11:58 -0800)]
btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes
refcounts have a generic implementation and an asm optimized one. The
generic version has extra debugging to make sure that once a refcount
goes to zero, refcount_inc won't increase it.
The btrfs delayed inode code wasn't expecting this, and we're tripping
over the warnings when the generic refcounts are used. We ended up with
this race:
Process A Process B
btrfs_get_delayed_node()
spin_lock(root->inode_lock)
radix_tree_lookup()
__btrfs_release_delayed_node()
refcount_dec_and_test(&delayed_node->refs)
our refcount is now zero
refcount_add(2) <---
warning here, refcount
unchanged
spin_lock(root->inode_lock)
radix_tree_delete()
With the generic refcounts, we actually warn again when process B above
tries to release his refcount because refcount_add() turned into a
no-op.
We saw this in production on older kernels without the asm optimized
refcounts.
The fix used here is to use refcount_inc_not_zero() to detect when the
object is in the middle of being freed and return NULL. This is almost
always the right answer anyway, since we usually end up pitching the
delayed_node if it didn't have fresh data in it.
This also changes __btrfs_release_delayed_node() to remove the extra
check for zero refcounts before radix tree deletion.
btrfs_get_delayed_node() was the only path that was allowing refcounts
to go from zero to one.
Fixes: 6de5f18e7b0da ("btrfs: fix refcount_t usage when deleting btrfs_delayed_node")
CC: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 13 Dec 2017 11:50:07 +0000 (13:50 +0200)]
btrfs: Fix flush bio leak
Commit
e0ae99941423 ("btrfs: preallocate device flush bio") reworked
the way the flush bio is allocated and used. Concretely it allocates
the bio in __alloc_device and then re-uses it multiple times with a
very simple endio routine that just calls complete() without consuming
a reference. Allocated bios by default come with a ref count of 1,
which is then consumed by the endio routine (or not, in which case they
should be bio_put by the caller). The way the impleementation works now
is that the flush bio has a refcount of 2 and we only ever bio_put it
once, leaving it to hang indefinitely. Fix this by removing the extra
bio_get in __alloc_device.
Fixes: e0ae99941423 ("btrfs: preallocate device flush bio")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Robin Murphy [Tue, 2 Jan 2018 12:33:14 +0000 (12:33 +0000)]
iommu/arm-smmu-v3: Cope with duplicated Stream IDs
For PCI devices behind an aliasing PCIe-to-PCI/X bridge, the bridge
alias to DevFn 0.0 on the subordinate bus may match the original RID of
the device, resulting in the same SID being present in the device's
fwspec twice. This causes trouble later in arm_smmu_write_strtab_ent()
when we wind up visiting the STE a second time and find it already live.
Avoid the issue by giving arm_smmu_install_ste_for_dev() the cleverness
to skip over duplicates. It seems mildly counterintuitive compared to
preventing the duplicates from existing in the first place, but since
the DT and ACPI probe paths build their fwspecs differently, this is
actually the cleanest and most self-contained way to deal with it.
Cc: <stable@vger.kernel.org>
Fixes: 8f78515425da ("iommu/arm-smmu: Implement of_xlate() for SMMUv3")
Reported-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Tested-by: Jayachandran C. <jnair@caviumnetworks.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Jean-Philippe Brucker [Thu, 14 Dec 2017 11:03:01 +0000 (11:03 +0000)]
iommu/arm-smmu-v3: Don't free page table ops twice
Kasan reports a double free when finalise_stage_fn fails: the io_pgtable
ops are freed by arm_smmu_domain_finalise and then again by
arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure.
Cc: <stable@vger.kernel.org>
Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Markus Heiser [Tue, 12 Dec 2017 11:38:37 +0000 (12:38 +0100)]
docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c
With commit
d9e2e0143c the 'GuC-specific firmware loader' doc
section was removed from intel_guc_loader.c without a
replacement. So lets remove it from the Kernel-doc::
.. kernel-doc:: drivers/gpu/drm/i915/intel_guc_loader.c
:doc: GuC-specific firmware loader
With commit
e8668bbcb0 intel_guc_loader.c was renamed to to
intel_guc_fw.c and to name just one, intel_guc_init_hw() was
renamed to intel_guc_fw_upload(). Since we get errors in the
Sphinx build like:
- Error: Cannot open file ./drivers/gpu/drm/i915/intel_guc_loader.c
Change the kernel-doc directive from intel_guc_loader.c to
intel_guc_fw.c
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
[danvet: Rebase onto the partial fix
006c23327f8d
("documentation/gpu/i915: fix docs build error after file rename")]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1513078717-12373-1-git-send-email-markus.heiser@darmarit.de
(cherry picked from commit
0132a1a5d44d2cd32a249dbe999a88c2134a6bd1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Wei Yongjun [Thu, 28 Dec 2017 03:46:48 +0000 (03:46 +0000)]
xen/pvcalls: use GFP_ATOMIC under spin lock
A spin lock is taken here so we should use GFP_ATOMIC.
Fixes: 9774c6cca266 ("xen/pvcalls: implement accept command")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Stefan Haberland [Wed, 6 Dec 2017 09:30:39 +0000 (10:30 +0100)]
s390/dasd: fix wrongly assigned configuration data
We store per path and per device configuration data to identify the
path or device correctly. The per path configuration data might get
mixed up if the original request gets into error recovery and is
started with a random path mask.
This would lead to a wrong identification of a path in case of a CUIR
event for example.
Fix by copying the path mask from the original request to the error
recovery request in case it is a path verification request.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Hans Verkuil [Mon, 4 Dec 2017 13:32:46 +0000 (14:32 +0100)]
omapdrm/dss/hdmi4_cec: fix interrupt handling
The omap4 CEC hardware cannot tell a Nack from a Low Drive from an
Arbitration Lost error, so just report a Nack, which is almost
certainly the reason for the error anyway.
This also simplifies the implementation. The only three interrupts
that need to be enabled are:
Transmit Buffer Full/Empty Change event: triggered when the
transmit finished successfully and cleared the buffer.
Receiver FIFO Not Empty event: triggered when a message was received.
Frame Retransmit Count Exceeded event: triggered when a transmit
failed repeatedly, usually due to the message being Nacked. Other
reasons are possible (Low Drive, Arbitration Lost) but there is no
way to know. If this happens the TX buffer needs to be cleared
manually.
While testing various error conditions I noticed that the hardware
can receive messages up to 18 bytes in total, which exceeds the legal
maximum of 16. This could cause a buffer overflow, so we check for
this and constrain the size to 16 bytes.
The old incorrect interrupt handler could cause the CEC framework to
enter into a bad state because it mis-detected the "Start Bit Irregularity
event" as an ARB_LOST transmit error when it actually is a receive error
which should be ignored.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Henrik Austad <haustad@cisco.com>
Tested-by: Henrik Austad <haustad@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Randy Dunlap [Sun, 3 Dec 2017 23:36:20 +0000 (15:36 -0800)]
documentation/gpu/i915: fix docs build error after file rename
Fix documentation build errors after intel_guc_loader.c was
renamed to intel_guc_fw.c.
Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c
WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -function GuC-specific firmware loader ../drivers/gpu/drm/i915/intel_guc_loader.c' failed with return code 1
Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c
Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c
WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -internal ../drivers/gpu/drm/i915/intel_guc_loader.c' failed with return code 2
Fixes: e8668bbcb0f9 ("drm/i915/guc: Rename intel_guc_loader.c to intel_guc_fw.c")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1b214f53-47f5-bef3-f58e-8136de5678ed@infradead.org
(cherry picked from commit
006c23327f8de8575508c458131b304188d426f7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Mon, 13 Nov 2017 13:36:22 +0000 (15:36 +0200)]
drm/i915: Put all non-blocking modesets onto an ordered wq
We have plenty of global registers and whatnot programmed without
any further locking by the modeset code. Currently non-bocking
modesets are allowed to execute in parallel which could corrupt
said registers.
To avoid the problem let's run all non-blocking modesets on an
ordered workqueue. We still put page flips etc. to system_unbound_wq
allowing page flips on one pipe to execute in parallel with page flips
or a modeset on a another pipe (assuming no known state is shared
between them, at which point they would have been added to the same
atomic commit and serialized that way).
Blocking modesets are already serialized with each other by
connection_mutex, and thus are safe. To serialize them with
non-blocking modesets we just flush the workqueue before executing
blocking modesets.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 94f050246b42 ("drm/i915: nonblocking commit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113133622.8593-1-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit
757fffcfdffb6c0dd46c1b264091c36b4e5a86ae)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Fri, 8 Dec 2017 21:37:36 +0000 (23:37 +0200)]
drm/i915: Disable DC states around GMBUS on GLK
Prevent the DMC from destroying GMBUS transfers on GLK. GMBUS
lives in PG1 so DC off is all we need.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit
156961ae7bdf6feb72778e8da83d321b273343fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Dhinakaran Pandiyan [Wed, 20 Dec 2017 04:35:20 +0000 (20:35 -0800)]
drm/i915/psr: Fix register name mess up.
Commit
77affa31722b ("drm/i915/psr: Fix compiler warnings for
hsw_psr_disable()") swapped status and control registers while fixing
indentation. The _ctl at the end of the status register name must have to
led to this.
Fixes: 77affa31722b ("drm/i915/psr: Fix compiler warnings for hsw_psr_disable()")
References: https://www.mrc-cbu.cam.ac.uk/people/matt.davis/cmabridge/
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220043520.2599-1-dhinakaran.pandiyan@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit
14c6547d6df641d3e41fa4f4164f6e267ebfab89)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
John Sperbeck [Mon, 1 Jan 2018 05:24:58 +0000 (21:24 -0800)]
powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
The recent refactoring of the powerpc page fault handler in commit
c3350602e876 ("powerpc/mm: Make bad_area* helper functions") caused
access to protected memory regions to indicate SEGV_MAPERR instead of
the traditional SEGV_ACCERR in the si_code field of a user-space
signal handler. This can confuse debug libraries that temporarily
change the protection of memory regions, and expect to use SEGV_ACCERR
as an indication to restore access to a region.
This commit restores the previous behavior. The following program
exhibits the issue:
$ ./repro read || echo "FAILED"
$ ./repro write || echo "FAILED"
$ ./repro exec || echo "FAILED"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <signal.h>
#include <sys/mman.h>
#include <assert.h>
static void segv_handler(int n, siginfo_t *info, void *arg) {
_exit(info->si_code == SEGV_ACCERR ? 0 : 1);
}
int main(int argc, char **argv)
{
void *p = NULL;
struct sigaction act = {
.sa_sigaction = segv_handler,
.sa_flags = SA_SIGINFO,
};
assert(argc == 2);
p = mmap(NULL, getpagesize(),
(strcmp(argv[1], "write") == 0) ? PROT_READ : 0,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
assert(p != MAP_FAILED);
assert(sigaction(SIGSEGV, &act, NULL) == 0);
if (strcmp(argv[1], "read") == 0)
printf("%c", *(unsigned char *)p);
else if (strcmp(argv[1], "write") == 0)
*(unsigned char *)p = 0;
else if (strcmp(argv[1], "exec") == 0)
((void (*)(void))p)();
return 1; /* failed to generate SEGV */
}
Fixes: c3350602e876 ("powerpc/mm: Make bad_area* helper functions")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Add commit references in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
projects / openwrt / staging / blogic.git / log