Dave Airlie [Wed, 24 Apr 2019 00:12:34 +0000 (10:12 +1000)]
Merge tag 'drm-misc-next-2019-04-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.2:
UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains
Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.
Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/737ad994-213d-45b5-207a-b99d795acd21@linux.intel.com
Dave Airlie [Wed, 24 Apr 2019 00:02:20 +0000 (10:02 +1000)]
Merge tag 'drm-intel-next-2019-04-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- uAPI "Fixes:" patch for the upcoming kernel 5.1, included here too
We have an Ack from the media folks (only current user) for this
late tweak
Cross-subsystem Changes:
- ALSA: hda: Fix racy display power access (Takashi, Chris)
Driver Changes:
- DDI and MIPI-DSI clocks fixes for Icelake (Vandita)
- Fix Icelake frequency change/locking (RPS) (Mika)
- Temporarily disable ppGTT read-only bit on Icelake (Mika)
- Add missing Icelake W/As (Mika)
- Enable 12 deep CSB status FIFO on Icelake (Mika)
- Inherit more Icelake code for Elkhartlake (Bob, Jani)
- Handle catastrophic error on engine reset (Mika)
- Shortcut readiness to reset check (Mika)
- Regression fix for GEM_BUSY causing us to report a mixed uabi-class request as not busy (Chris)
- Revert back to max link rate and lane count on eDP (Jani)
- Fix pipe BPP readout for BXT/GLK DSI (Ville)
- Set DP min_bpp to 8*3 for non-RGB output formats (Ville)
- Enable coarse preemption boundaries for Gen8 (Chris)
- Do not enable FEC without DSC (Ville)
- Restore correct BXT DDI latency optim setting calculation (Ville)
- Always reset context's RING registers to avoid running workload twice during reset (Chris)
- Set GPU wedged on driver unload (Janusz)
- Consolidate two similar barries from timeline into one (Chris)
- Only reset the pinned kernel contexts on resume (Chris)
- Wakeref tracking improvements (Chris, Imre)
- Lockdep fixes for shrinker interactions (Chris)
- Bump ready tasks ahead of busywaits in prep of semaphore use (Chris)
- Huge step in splitting display code into fine grained files (Jani)
- Refactor the IRQ init/reset macros for code saving (Paulo)
- Convert IRQ initialization code to uncore MMIO access (Paulo)
- Convert workarounds code to use uncore MMIO access (Chris)
- Nuke drm_crtc_state and use intel_atomic_state instead (Manasi)
- Update SKL clock-gating WA (Radhakrishna, Ville)
- Isolate GuC reset code flow (Chris)
- Expose force_dsc_enable through debugfs (Manasi)
- Header standalone compile testing framework (Jani)
- Code cleanups to reduce driver footprint (Chris)
- PSR code fixes and cleanups (Jose)
- Sparse and kerneldoc updates (Chris)
- Suppress spurious combo PHY B warning (Vile)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418080426.GA6409@jlahtine-desk.ger.corp.intel.com
Dave Airlie [Tue, 23 Apr 2019 21:21:30 +0000 (07:21 +1000)]
Merge branch 'vmwgfx-next' of https://gitlab.freedesktop.org/drawat/linux into drm-next
Resource dirtying improvement by Thomas,
user-space error logging improvement and
some other minor fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Deepak Rawat <drawat@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423211630.61874-1-drawat@vmware.com
Jonathan Marek [Sat, 24 Nov 2018 20:06:28 +0000 (15:06 -0500)]
drm/panel: simple: add lg,acx467akm-7 panel
Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus
5 (hammerhead) phone.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[masneyb@onstation.org: checkpatch fixes; rename jdi,1080p-hammerhead
binding to lg,acx467akm-7.]
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-2-masneyb@onstation.org
Brian Masney [Sat, 24 Nov 2018 20:06:27 +0000 (15:06 -0500)]
dt-bindings: drm/panel: simple: add lg,acx467akm-7 panel
Add binding for the LG ACX467AKM-7 4.95" 1080×1920 LCD panel that is
found on the LG Nexus 5 (hammerhead) phone. This appears to be a JDI
panel based on some Internet searches, however a specific model number
could not be found. I disassembled an old Nexus 5 with a broken
screen and the LG part number is the only model number present on the
back of the panel, so I think that is probably the best ID to use.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-1-masneyb@onstation.org
Linus Walleij [Tue, 16 Apr 2019 14:28:44 +0000 (16:28 +0200)]
drm/mcde: Add device tree bindings
This adds the device tree bindings for the ST-Ericsson
Multi Channel Display Engine MCDE as found in the U8500
SoCs.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416142844.12038-1-linus.walleij@linaro.org
Dave Airlie [Wed, 17 Apr 2019 20:46:33 +0000 (06:46 +1000)]
Revert "drm: allow render capable master with DRM_AUTH ioctls"
This reverts commit
8059add0478e29cb641936011a8fcc9ce9fd80be.
This commit while seemingly a good idea, breaks a radv check,
for a node being master because something succeeds where it failed
before now.
Apply the Linus rule, revert early and try again, we don't break
userspace.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Janusz Krzysztofik [Wed, 17 Apr 2019 13:32:31 +0000 (15:32 +0200)]
drm/drv: Fix incorrect resolution of merge conflict
Commit
f06ddb53096b ("BackMerge v5.1-rc5 into drm-next") incorrectly
resolved a merge conflict related to a patch having been merged twice:
- commit
3f04e0a6cfeb ("drm: Fix drm_release() and device unplug")
introduced as a standalone fix via drm-fixes branch,
- commit
1ee57d4d75fb ("drm: Fix drm_release() and device unplug")
applied as patch 1/2 of a series on drm-next branch.
That incorrect resolution of the conflict effectively reverted a change
introduced to drivers/gpu/drm/drm_drv.c by patch 2/2 of that series -
commit
ba3bf37e150a ("drm/drv: drm_dev_unplug(): Move out drm_dev_put()
call"). Fix it.
Fixes: f06ddb53096b ("BackMerge v5.1-rc5 into drm-next")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190417133232.16232-1-janusz.krzysztofik@linux.intel.com
Neil Armstrong [Mon, 8 Apr 2019 09:01:37 +0000 (11:01 +0200)]
drm/meson: add size and alignment requirements for dumb buffers
The Amlogic SoCs Canvas buffers stride must be aligned on 64bytes
and overall size should be aligned on PAGE width.
Adds a custom dumb_create op to adds these requirements.
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Suggested-by: Sky Zhou <sky.zhou@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sky Zhou <sky.zhou@amlogic.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408090137.2402-1-narmstrong@baylibre.com
YueHaibing [Sat, 13 Apr 2019 14:14:55 +0000 (22:14 +0800)]
drm/meson: Make some functions static
Fix sparse warnings:
drivers/gpu/drm/meson/meson_viu.c:93:6: warning: symbol 'meson_viu_set_g12a_osd1_matrix' was not declared. Should it be static?
drivers/gpu/drm/meson/meson_viu.c:121:6: warning: symbol 'meson_viu_set_osd_matrix' was not declared. Should it be static?
drivers/gpu/drm/meson/meson_viu.c:190:6: warning: symbol 'meson_viu_set_osd_lut' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190413141455.34020-1-yuehaibing@huawei.com
YueHaibing [Tue, 16 Apr 2019 14:58:55 +0000 (22:58 +0800)]
drm/sun4i: Make some symbols static
Fix sparse warnings:
drivers/gpu/drm/sun4i/sun8i_tcon_top.c:271:36: warning: symbol 'sun8i_r40_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun8i_tcon_top.c:276:36: warning: symbol 'sun50i_h6_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun4i_tcon.c:239:6: warning: symbol 'sun4i_tcon_set_mux' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416145855.20852-1-yuehaibing@huawei.com
YueHaibing [Tue, 16 Apr 2019 14:43:53 +0000 (22:43 +0800)]
drm/lima: Make lima_sched_ops static
Fix sparse warning:
drivers/gpu/drm/lima/lima_sched.c:356:36: warning:
symbol 'lima_sched_ops' was not declared. Should it be static?
Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416144353.34024-1-yuehaibing@huawei.com
Joonas Lahtinen [Wed, 17 Apr 2019 09:07:47 +0000 (12:07 +0300)]
drm/i915: Update DRIVER_DATE to
20190417
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Jani Nikula [Tue, 16 Apr 2019 08:28:52 +0000 (11:28 +0300)]
drm/i915/ehl: inherit icl cdclk init/uninit
The cdclk init/uninit code was changed by commit
93a643f29bcb
("drm/i915/cdclk: have only one init/uninit function") between the
versions of commit
39564ae86d51 ("drm/i915/ehl: Inherit Ice Lake
conditional code"). What got merged fails to do cdclk init/uninit on
ehl.
Fixes: 39564ae86d51 ("drm/i915/ehl: Inherit Ice Lake conditional code")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416082852.18141-1-jani.nikula@intel.com
Gerd Hoffmann [Tue, 16 Apr 2019 09:05:33 +0000 (11:05 +0200)]
drm: add drm_format_helper.c to kerneldoc
Also drop the dstclip parameter sphinx has warned about (leftover from
an earlier patch version).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190416090533.28374-1-kraxel@redhat.com
Chris Wilson [Fri, 12 Apr 2019 07:14:16 +0000 (08:14 +0100)]
drm/i915: Introduce struct class_instance for engines across the uAPI
SSEU reprogramming of the context introduced the notion of engine class
and instance for a forwards compatible method of describing any engine
beyond the old execbuf interface. We wish to adopt this class:instance
description for more interfaces, so pull it out into a separate type for
userspace convenience.
Fixes: e46c2e99f600 ("drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Andi Shyti <andi@etezian.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412071416.30097-1-chris@chris-wilson.co.uk
Eric Anholt [Mon, 1 Apr 2019 22:26:35 +0000 (15:26 -0700)]
drm/lima: Use the drm_gem_fence_array_add helpers for our deps.
It's a pretty direct port of what I did for v3d.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-8-eric@anholt.net
Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com>
Eric Anholt [Mon, 1 Apr 2019 22:26:33 +0000 (15:26 -0700)]
drm: Add helpers for setting up an array of dma_fence dependencies.
I needed to add implicit dependency support for v3d, and Rob Herring
has been working on it for panfrost, and I had recently looked at the
lima implementation so I think this will be a good intersection of
what we all want and simplify our scheduler implementations.
v2: Rebase on xa_limit_32b API change, and tiny checkpatch cleanups on
the way in (unsigned int vs unsigned, extra return before
EXPORT_SYMBOL_GPL)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-6-eric@anholt.net
Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com> (v1)
Deepak Rawat [Mon, 15 Apr 2019 17:28:05 +0000 (10:28 -0700)]
drm: Expose "FB_DAMAGE_CLIPS" property to atomic aware user-space only
Plane property "FB_DAMAGE_CLIPS" can only be used by atomic aware
user-space, so no point exposing it otherwise.
Cc: <stable@vger.kernel.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update")
Link: https://patchwork.freedesktop.org/patch/msgid/20190415172814.9840-1-drawat@vmware.com
Paulo Zanoni [Wed, 10 Apr 2019 23:53:44 +0000 (16:53 -0700)]
drm/i915: fully convert the IRQ initialization macros to intel_uncore
Make them take the uncore argument from the caller instead of passing
the implicit &dev_priv->uncore directly. This will allow us to finally
pass something that's not dev_priv->uncore in the future, and gets rid
of the implicit variables in register macros.
v2: Rebase on top of the newer patches.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-6-paulo.r.zanoni@intel.com
Paulo Zanoni [Wed, 10 Apr 2019 23:53:43 +0000 (16:53 -0700)]
drm/i915: convert the IRQ initialization functions to intel_uncore
The IRQ initialization helpers are simple and self-contained. Continue
the transition started in the recent uncore rework to get us rid of
I915_READ/WRITE and the implicit dev_priv variables.
While the implicit dev_priv is removed from the IRQ initialization
helpers, we didn't get rid of them in the macro callers. Doing that
should be very simple now.
v2: Rebase on top of the new patches.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-5-paulo.r.zanoni@intel.com
Paulo Zanoni [Wed, 10 Apr 2019 23:53:42 +0000 (16:53 -0700)]
drm/i915: add GEN2_ prefix to the I{E, I, M, S}R registers
This discussion started because we use token pasting in the
GEN{2,3}_IRQ_INIT and GEN{2,3}_IRQ_RESET macros, so gen2-4 passes an
empty argument to those macros, making the code a little weird. The
original proposal was to just add a comment as the empty argument, but
Ville suggested we just add a prefix to the registers, and that indeed
sounds like a more elegant solution.
Now doing this is kinda against our rules for register naming since we
only add gens or platform names as register prefixes when the given
gen/platform changes a register that already existed before. On the
other hand, we have so many instances of IIR/IMR in comments that
adding a prefix would make the users of these register more easily
findable, in addition to make our token pasting macros actually
readable. So IMHO opening an exception here is worth it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-4-paulo.r.zanoni@intel.com
Paulo Zanoni [Wed, 10 Apr 2019 23:53:41 +0000 (16:53 -0700)]
drm/i915: don't specify the IRQ register in the gen2 macros
Like the gen3+ macros, the gen2 versions of the IRQ initialization
macros take the register name in the 'type' argument. But gen2 only
has one set of registers, so there's really no need to specify the
type. This commit removes the type argument and uses the registers
directly instead of passing them through variables.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-3-paulo.r.zanoni@intel.com
Paulo Zanoni [Wed, 10 Apr 2019 23:53:40 +0000 (16:53 -0700)]
drm/i915: refactor the IRQ init/reset macros
The whole point of having macros here is for the token pasting
necessary to automatically have IMR, IIR and IER selected. We don't
really need or want all the inlining that happens as a consequence.
The good thing about the current code is that it works regardless of
the relative offsets between these registers (they change after gen4,
with the usual VLV/CHV exceptions).
One thing which we can do is to split the logic of what we do with
imr/ier/iir to functions separate from the macros that pick them.
That's what we do in this commit. This allows us to get rid of the
gen8 duplicates and also all the inlining:
add/remove: 2/0 grow/shrink: 0/21 up/down: 384/-5949 (-5565)
Function old new delta
gen3_irq_reset - 233 +233
gen3_irq_init - 151 +151
i8xx_irq_postinstall 459 442 -17
gen11_irq_postinstall 804 744 -60
ironlake_irq_postinstall 450 353 -97
vlv_display_irq_postinstall 348 245 -103
i965_irq_postinstall 378 272 -106
i915_irq_postinstall 333 227 -106
gen8_irq_power_well_post_enable 374 240 -134
ironlake_irq_reset 397 218 -179
vlv_display_irq_reset 616 433 -183
i965_irq_reset 374 180 -194
cherryview_irq_reset 379 185 -194
i915_irq_reset 407 209 -198
ibx_irq_reset 332 133 -199
gen5_gt_irq_postinstall 533 332 -201
gen8_irq_power_well_pre_disable 434 204 -230
gen8_gt_irq_postinstall 469 196 -273
gen8_de_irq_postinstall 1200 836 -364
gen5_gt_irq_reset 471 76 -395
gen8_gt_irq_reset 775 99 -676
gen8_irq_reset 1100 333 -767
gen11_irq_reset 1959 686 -1273
Total: Before=
2259222, After=
2253657, chg -0.25%
v2:
- Make checkpatch happy with a temporary which_ (Checkpatch).
- Reorder the arguments for the INIT macros (Ville).
- Correctly explain when the register offsets change in the commit
message (Ville).
- Use more line breaks in the macro calls to make the arguments look
a little more organized/readable.
- Update the bloat-o-meter output (minor change only).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-2-paulo.r.zanoni@intel.com
Joel Stanley [Fri, 5 Apr 2019 08:11:17 +0000 (18:41 +1030)]
drm: aspeed: Clean up Kconfig options
The GFX IP is inside of the ASPEED BMC SoC so there is little use
enabling it on a kernel that does not support ASPEED.
When building with COMPILE_TEST the architecture many not have CMA
support, so to avoid breaking the build we only select these options if
the architecture supports the contiguous allocator.
I suspect the DRM_PANEL came from a cut/paste error.
Fixes: 4f2a8f5898ec ("drm: Add ASPEED GFX driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405081117.27339-1-joel@jms.id.au
Joonas Lahtinen [Tue, 16 Apr 2019 13:45:26 +0000 (16:45 +0300)]
Merge tag 'gvt-next-2019-04-16' of https://github.com/intel/gvt-linux into drm-intel-next-queued
gvt-next-2019-04-16
- Refine range of MCHBAR snapshot (Yakui)
- Refine out-of-sync page struct (Yakui)
- Remove unused vGPU sreg (Yan)
- Refind MMIO reg names (Xiaolin)
- Proper handling of sync/async flip (Colin)
- Proper handling of PIPE_CONTROL/MI_FLUSH_DW index mode (Xiaolin)
- EXCC reg mask fix (Colin)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416084814.GH17995@zhen-hp.sh.intel.com
Christian König [Mon, 15 Apr 2019 12:46:34 +0000 (14:46 +0200)]
dma-buf: explicitely note that dma-fence-chains use 64bit seqno
Instead of checking the upper values of the sequence number use an explicit
field in the dma_fence_ops structure to note if a sequence should be 32bit
or 64bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/299655/
Chris Wilson [Fri, 12 Apr 2019 08:53:22 +0000 (09:53 +0100)]
drm/i915: Mark up ips for RCU protection
drivers/gpu/drm/i915/intel_pm.c:8352:9: error: incompatible types in comparison expression (different address spaces)
drivers/gpu/drm/i915/intel_pm.c:8359:9: error: incompatible types in comparison expression (different address spaces)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412085410.10392-3-chris@chris-wilson.co.uk
Chris Wilson [Tue, 16 Apr 2019 08:52:18 +0000 (09:52 +0100)]
drm/i915: Drop bool return from breadcrumbs signaler
Since removal of the "missed interrupt detection" nobody used the result
of whether or not we signaled anybody during that invocation, so now
remove the return value.
References:
789659f4307a ("drm/i915: Drop fake breadcrumb irq")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416085218.431-1-chris@chris-wilson.co.uk
Colin Xu [Mon, 1 Apr 2019 06:13:53 +0000 (14:13 +0800)]
drm/i915/gvt: Fix incorrect mask of mmio 0x22028 in gen8/9 mmio list
According to GFX PRM on 01.org, bit 31:16 of mmio 0x22028 should be masks.
Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Xiaolin Zhang [Wed, 3 Apr 2019 08:28:04 +0000 (16:28 +0800)]
drm/i915/gvt: addressed guest GPU hang with HWS index mode
with the introduce of "switch to use HWS indices rather than address",
guest GPU hang observed when running workloads which will update the
seqno to the real HW HWSP, not vitural GPU HWSP and then cause GPU hang.
this patch is to revoke index mode in PIPE_CTRL and MI_FLUSH_DW and
patch guest GPU HWSP address value to these commands.
Fixes: 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Zhenyu Wang [Tue, 16 Apr 2019 08:50:34 +0000 (16:50 +0800)]
Merge tag 'drm-intel-next-2019-04-04' into gvt-next
Merge back drm-intel-next for engine name definition refinement
and
54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
that would need gvt fixes to depend on.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Manasi Navare [Mon, 15 Apr 2019 18:22:10 +0000 (11:22 -0700)]
drm/i915: Nuke drm_crtc_state and use intel_atomic_state instead
This is one of the patches to start replacing drm pointers
and use the intel_atomic_state and intel_crtc to derive
the necessary intel state variables required for the intel
modeset functions.
v3:
* Remove the unwanted newline (Ville)
v2:
* Flip the function arguments (Ville)
* Remove some remaining instances of drm pointers (Ville)
* Use old_crtc_state and new_crtc_state (Ville)
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190415182210.13347-1-manasi.d.navare@intel.com
Chris Wilson [Sat, 13 Apr 2019 12:58:20 +0000 (13:58 +0100)]
drm/i915/selftests: Skip live timeline/suspend tests if wedged
If the driver is wedged, we can not issue the requests to exercise the
timelines or the system across suspend, so skip the tests. live_hangcheck
is there to fail if we cannot recover.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190413125820.14112-4-chris@chris-wilson.co.uk
Dave Airlie [Mon, 15 Apr 2019 05:51:49 +0000 (15:51 +1000)]
BackMerge v5.1-rc5 into drm-next
Need rc5 for udl fix to add udl cleanups on top.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Sun, 14 Apr 2019 22:17:41 +0000 (15:17 -0700)]
Linux 5.1-rc5
Linus Torvalds [Sun, 14 Apr 2019 22:09:40 +0000 (15:09 -0700)]
Merge branch 'page-refs' (page ref overflow)
Merge page ref overflow branch.
Jann Horn reported that he can overflow the page ref count with
sufficient memory (and a filesystem that is intentionally extremely
slow).
Admittedly it's not exactly easy. To have more than four billion
references to a page requires a minimum of 32GB of kernel memory just
for the pointers to the pages, much less any metadata to keep track of
those pointers. Jann needed a total of 140GB of memory and a specially
crafted filesystem that leaves all reads pending (in order to not ever
free the page references and just keep adding more).
Still, we have a fairly straightforward way to limit the two obvious
user-controllable sources of page references: direct-IO like page
references gotten through get_user_pages(), and the splice pipe page
duplication. So let's just do that.
* branch page-refs:
fs: prevent page refcount overflow in pipe_buf_get
mm: prevent get_user_pages() from overflowing page refcount
mm: add 'try_get_page()' helper function
mm: make page ref count overflow check tighter and more explicit
Matthew Wilcox [Fri, 5 Apr 2019 21:02:10 +0000 (14:02 -0700)]
fs: prevent page refcount overflow in pipe_buf_get
Change pipe_buf_get() to return a bool indicating whether it succeeded
in raising the refcount of the page (if the thing in the pipe is a page).
This removes another mechanism for overflowing the page refcount. All
callers converted to handle a failure.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 11 Apr 2019 17:49:19 +0000 (10:49 -0700)]
mm: prevent get_user_pages() from overflowing page refcount
If the page refcount wraps around past zero, it will be freed while
there are still four billion references to it. One of the possible
avenues for an attacker to try to make this happen is by doing direct IO
on a page multiple times. This patch makes get_user_pages() refuse to
take a new page reference if there are already more than two billion
references to the page.
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 11 Apr 2019 17:14:59 +0000 (10:14 -0700)]
mm: add 'try_get_page()' helper function
This is the same as the traditional 'get_page()' function, but instead
of unconditionally incrementing the reference count of the page, it only
does so if the count was "safe". It returns whether the reference count
was incremented (and is marked __must_check, since the caller obviously
has to be aware of it).
Also like 'get_page()', you can't use this function unless you already
had a reference to the page. The intent is that you can use this
exactly like get_page(), but in situations where you want to limit the
maximum reference count.
The code currently does an unconditional WARN_ON_ONCE() if we ever hit
the reference count issues (either zero or negative), as a notification
that the conditional non-increment actually happened.
NOTE! The count access for the "safety" check is inherently racy, but
that doesn't matter since the buffer we use is basically half the range
of the reference count (ie we look at the sign of the count).
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 11 Apr 2019 17:06:20 +0000 (10:06 -0700)]
mm: make page ref count overflow check tighter and more explicit
We have a VM_BUG_ON() to check that the page reference count doesn't
underflow (or get close to overflow) by checking the sign of the count.
That's all fine, but we actually want to allow people to use a "get page
ref unless it's already very high" helper function, and we want that one
to use the sign of the page ref (without triggering this VM_BUG_ON).
Change the VM_BUG_ON to only check for small underflows (or _very_ close
to overflowing), and ignore overflows which have strayed into negative
territory.
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Apr 2019 23:23:16 +0000 (16:23 -0700)]
Merge tag 'for-linus-
20190412' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Set of fixes that should go into this round. This pull is larger than
I'd like at this time, but there's really no specific reason for that.
Some are fixes for issues that went into this merge window, others are
not. Anyway, this contains:
- Hardware queue limiting for virtio-blk/scsi (Dongli)
- Multi-page bvec fixes for lightnvm pblk
- Multi-bio dio error fix (Jason)
- Remove the cache hint from the io_uring tool side, since we didn't
move forward with that (me)
- Make io_uring SETUP_SQPOLL root restricted (me)
- Fix leak of page in error handling for pc requests (Jérôme)
- Fix BFQ regression introduced in this merge window (Paolo)
- Fix break logic for bio segment iteration (Ming)
- Fix NVMe cancel request error handling (Ming)
- NVMe pull request with two fixes (Christoph):
- fix the initial CSN for nvme-fc (James)
- handle log page offsets properly in the target (Keith)"
* tag 'for-linus-
20190412' of git://git.kernel.dk/linux-block:
block: fix the return errno for direct IO
nvmet: fix discover log page when offsets are used
nvme-fc: correct csn initialization and increments on error
block: do not leak memory in bio_copy_user_iov()
lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs
nvme: cancel request synchronously
blk-mq: introduce blk_mq_complete_request_sync()
scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids
virtio-blk: limit number of hw queues by nr_cpu_ids
block, bfq: fix use after free in bfq_bfqq_expire
io_uring: restrict IORING_SETUP_SQPOLL to root
tools/io_uring: remove IOCQE_FLAG_CACHEHIT
block: don't use for-inside-for in bio_for_each_segment_all
Linus Torvalds [Sat, 13 Apr 2019 21:47:06 +0000 (14:47 -0700)]
Merge tag 'nfs-for-5.1-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fix:
- Fix a deadlock in close() due to incorrect draining of RDMA queues
Bugfixes:
- Revert "SUNRPC: Micro-optimise when the task is known not to be
sleeping" as it is causing stack overflows
- Fix a regression where NFSv4 getacl and fs_locations stopped
working
- Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
- Fix xfstests failures due to incorrect copy_file_range() return
values"
* tag 'nfs-for-5.1-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping"
NFSv4.1 fix incorrect return value in copy_file_range
xprtrdma: Fix helper that drains the transport
NFS: Fix handling of reply page vector
NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
Linus Torvalds [Sat, 13 Apr 2019 21:37:49 +0000 (14:37 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One obvious fix for a ciostor data corruption on error bug"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
Linus Torvalds [Sat, 13 Apr 2019 21:33:56 +0000 (14:33 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's more than a handful of clk driver fixes for changes that came
in during the merge window:
- Fix the AT91 sama5d2 programmable clk prescaler formula
- A bunch of Amlogic meson clk driver fixes for the VPU clks
- A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc
clks as critical only when really needed
- Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate
implementation
- Use the right structure to test for a frequency table in i.MX's
PLL_1416x driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx: Fix PLL_1416X not rounding rates
clk: mediatek: fix clk-gate flag setting
platform/x86: pmc_atom: Drop __initconst on dmi table
clk: x86: Add system specific quirk to mark clocks as critical
clk: meson: vid-pll-div: remove warning and return 0 on invalid config
clk: meson: pll: fix rounding and setting a rate that matches precisely
clk: meson-g12a: fix VPU clock parents
clk: meson: g12a: fix VPU clock muxes mask
clk: meson-gxbb: round the vdec dividers to closest
clk: at91: fix programmable clock for sama5d2
Linus Torvalds [Sat, 13 Apr 2019 21:29:21 +0000 (14:29 -0700)]
Merge tag 'pci-v5.1-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Add a DMA alias quirk for another Marvell SATA device (Andre
Przywara)
- Fix a pciehp regression that broke safe removal of devices (Sergey
Miroshnichenko)
* tag 'pci-v5.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: pciehp: Ignore Link State Changes after powering off a slot
PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller
Linus Torvalds [Sat, 13 Apr 2019 16:03:09 +0000 (09:03 -0700)]
Merge tag 'powerpc-5.1-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A minor build fix for 64-bit FLATMEM configs.
A fix for a boot failure on 32-bit powermacs.
My commit to fix CLOCK_MONOTONIC across Y2038 broke the 32-bit VDSO on
64-bit kernels, ie. compat mode, which is only used on big endian.
The rewrite of the SLB code we merged in 4.20 missed the fact that the
0x380 exception is also used with the Radix MMU to report out of range
accesses. This could lead to an oops if userspace tried to read from
addresses outside the user or kernel range.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Larry Finger, Nicholas
Piggin"
* tag 'powerpc-5.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configs
powerpc/64s/radix: Fix radix segment exception handling
powerpc/vdso32: fix CLOCK_MONOTONIC on PPC64
powerpc/32: Fix early boot failure with RTAS built-in
Linus Torvalds [Sat, 13 Apr 2019 15:57:00 +0000 (08:57 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main thing is a fix to our FUTEX_WAKE_OP implementation which was
unbelievably broken, but did actually work for the one scenario that
GLIBC used to use.
Summary:
- Fix stack unwinding so we ignore user stacks
- Fix ftrace module PLT trampoline initialisation checks
- Fix terminally broken implementation of FUTEX_WAKE_OP atomics"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value
arm64: backtrace: Don't bother trying to unwind the userspace stack
arm64/ftrace: fix inadvertent BUG() in trampoline check
Chris Wilson [Fri, 12 Apr 2019 20:24:57 +0000 (21:24 +0100)]
drm/i915: Teach intel_workarounds to use uncore mmio access
Start weaning ourselves off the implicit I915_WRITE macro madness and
start using the explicit intel_uncore mmio access.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412202458.10653-1-chris@chris-wilson.co.uk
Linus Torvalds [Sat, 13 Apr 2019 03:54:40 +0000 (20:54 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix typos in user-visible resctrl parameters, and also fix assembly
constraint bugs that might result in miscompilation"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Use stricter assembly constraints in bitops
x86/resctrl: Fix typos in the mba_sc mount option
Linus Torvalds [Sat, 13 Apr 2019 03:52:28 +0000 (20:52 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix the alarm_timer_remaining() return value"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Return correct remaining time
Linus Torvalds [Sat, 13 Apr 2019 03:50:43 +0000 (20:50 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a NULL pointer dereference crash in certain environments"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Do not re-read ->h_load_next during hierarchical load calculation
Linus Torvalds [Sat, 13 Apr 2019 03:42:30 +0000 (20:42 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Six kernel side fixes: three related to NMI handling on AMD systems, a
race fix, a kexec initialization fix and a PEBS sampling fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix perf_event_disable_inatomic() race
x86/perf/amd: Remove need to check "running" bit in NMI handler
x86/perf/amd: Resolve NMI latency issues for active PMCs
x86/perf/amd: Resolve race condition when disabling PMC
perf/x86/intel: Initialize TFA MSR
perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS
Linus Torvalds [Sat, 13 Apr 2019 03:31:08 +0000 (20:31 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fixes a crash when accessing /proc/lockdep"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Zap lock classes even with lock debugging disabled
Linus Torvalds [Sat, 13 Apr 2019 03:21:59 +0000 (20:21 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two genirq fixes, plus an irqchip driver error handling fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
genirq: Initialize request_mutex if CONFIG_SPARSE_IRQ=n
irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()
Linus Torvalds [Sat, 13 Apr 2019 03:13:13 +0000 (20:13 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
"Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion
bug"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add rewind_stack_do_exit() to the noreturn list
linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
Bob Paauwe [Fri, 12 Apr 2019 18:09:20 +0000 (11:09 -0700)]
drm/i915/ehl: Inherit Ice Lake conditional code
Most of the conditional code for ICELAKE also applies to ELKHARTLAKE
so use IS_GEN(dev_priv, 11) even for PM and Workarounds for now.
v2: - Rename commit (Jose)
- Include a wm workaround (Jose and Lucas)
- Include display core init (Jose and Lucas)
v3: Add a missing case of gen greater-than 11 (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412180920.22347-1-rodrigo.vivi@intel.com
Leonard Crestez [Fri, 12 Apr 2019 14:10:03 +0000 (14:10 +0000)]
clk: imx: Fix PLL_1416X not rounding rates
Code which initializes the "clk_init_data.ops" checks pll->rate_table
before that field is ever assigned to so it always picks
"clk_pll1416x_min_ops".
This breaks dynamic rate rounding for features such as cpufreq.
Fix by checking pll_clk->rate_table instead, here pll_clk refers to
the constant initialization data coming from per-soc clk driver.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Rob Herring [Thu, 11 Apr 2019 21:53:13 +0000 (16:53 -0500)]
drm/panfrost: Add support for 2MB page entries
Add support for 2MB sized pages. This will improve our map and unmap
times and save a bit of memory by avoiding 3rd level page tables for
contiguous allocations.
As we use shmem for buffers and huge page allocations for shmem are off
by default, there isn't an improvement out of the box and userspace must
enable THP for shmem.
It's not clear if the h/w can support 1GB page sizes which standard
ARM long format descriptors support. In any case, it is unlikely we'll
see any contiguous 1GB allocations on current h/w.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411215313.1937-1-robh@kernel.org
Mika Kuoppala [Fri, 12 Apr 2019 16:53:53 +0000 (19:53 +0300)]
drm/i915: Handle catastrophic error on engine reset
If cat error is set, we need to clear it by acking it. Further,
if it is set, we must not do a normal request for reset.
v2: avoid goto (Chris)
v3: comment, error format, direct assign (Chris)
Bspec: 12567
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412165353.16432-1-mika.kuoppala@linux.intel.com
Mika Kuoppala [Fri, 12 Apr 2019 16:53:35 +0000 (19:53 +0300)]
drm/i915: Shortcut readiness to reset check
If the engine says it is ready for reset, it is ready
so avoid further dancing and proceed.
v2: reg (Chris)
v3: request, ack, mask from following patch (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412165335.16347-1-mika.kuoppala@linux.intel.com
Rob Herring [Mon, 10 Sep 2018 19:27:58 +0000 (14:27 -0500)]
drm/panfrost: Add initial panfrost driver
This adds the initial driver for panfrost which supports Arm Mali
Midgard and Bifrost family of GPUs. Currently, only the T860 and
T760 Midgard GPUs have been tested.
v2:
- Add GPU reset on job hangs (Tomeu)
- Add RuntimePM and devfreq support (Tomeu)
- Fix T760 support (Tomeu)
- Add a TODO file (Rob, Tomeu)
- Support multiple in fences (Tomeu)
- Drop support for shared fences (Tomeu)
- Fill in MMU de-init (Rob)
- Move register definitions back to single header (Rob)
- Clean-up hardcoded job submit todos (Rob)
- Implement feature setup based on features/issues (Rob)
- Add remaining Midgard DT compatible strings (Rob)
v3:
- Add support for reset lines (Neil)
- Add a MAINTAINERS entry (Rob)
- Call dma_set_mask_and_coherent (Rob)
- Do MMU invalidate on map and unmap. Restructure to do a single
operation per map/unmap call. (Rob)
- Add a missing explicit padding to struct drm_panfrost_create_bo (Rob)
- Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150"
- Drop HW_FEATURE_AARCH64_MMU conditional (Rob)
- s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob)
- Check drm_gem_shmem_prime_import_sg_table() error code (Rob)
- Re-order power on sequence (Rob)
- Move panfrost_acquire_object_fences() before scheduling job (Rob)
- Add NULL checks on array pointers in job clean-up (Rob)
- Rework devfreq (Tomeu)
- Fix devfreq init with no regulator (Rob)
- Various WS and comments clean-up (Rob)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-4-robh@kernel.org
Rob Herring [Fri, 8 Mar 2019 20:26:02 +0000 (14:26 -0600)]
drm: Add a drm_gem_objects_lookup helper
Similar to the single handle drm_gem_object_lookup(),
drm_gem_objects_lookup() takes an array of handles and returns an array
of GEM objects.
v2:
- Take the userspace pointer directly and allocate the array.
- Expand the function documentation.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-3-robh@kernel.org
Rob Herring [Thu, 21 Feb 2019 20:23:25 +0000 (14:23 -0600)]
iommu: io-pgtable: Add ARM Mali midgard MMU page table format
ARM Mali midgard GPU is similar to standard 64-bit stage 1 page tables, but
have a few differences. Add a new format type to represent the format. The
input address size is 48-bits and the output address size is 40-bits (and
possibly less?). Note that the later bifrost GPUs follow the standard
64-bit stage 1 format.
The differences in the format compared to 64-bit stage 1 format are:
The 3rd level page entry bits are 0x1 instead of 0x3 for page entries.
The access flags are not read-only and unprivileged, but read and write.
This is similar to stage 2 entries, but the memory attributes field matches
stage 1 being an index.
The nG bit is not set by the vendor driver. This one didn't seem to matter,
but we'll keep it aligned to the vendor driver.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-2-robh@kernel.org
Weiyi Lu [Fri, 12 Apr 2019 03:30:27 +0000 (11:30 +0800)]
clk: mediatek: fix clk-gate flag setting
CLK_SET_RATE_PARENT would be dropped.
Merge two flag setting together to correct the error.
Fixes: 5a1cc4c27ad2 ("clk: mediatek: Add flags to mtk_gate")
Cc: <stable@vger.kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Linus Torvalds [Fri, 12 Apr 2019 15:25:16 +0000 (08:25 -0700)]
Merge tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix a sparc64 sun4v_pci regression introduced in this merged window,
and a dma-debug stracktrace regression from the big refactor last
merge window"
* tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: only skip one stackframe entry
sparc64/pci_sun4v: fix ATU checks for large DMA masks
Linus Torvalds [Fri, 12 Apr 2019 15:21:15 +0000 (08:21 -0700)]
Merge tag 'iommu-fix-v5.1-rc5' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Fix an AMD IOMMU issue where the driver didn't correctly setup the
exclusion range in the hardware registers, resulting in exclusion
ranges being one page too big.
This can cause data corruption of the address of that last page is
used by DMA operations"
* tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Set exclusion range correctly
Linus Torvalds [Fri, 12 Apr 2019 15:18:37 +0000 (08:18 -0700)]
Merge tag 'clang-format-for-linus-v5.1-rc5' of git://github.com/ojeda/linux
Pull clang-format update from Miguel Ojeda:
"The usual roughly-per-release .clang-format macro list update"
* tag 'clang-format-for-linus-v5.1-rc5' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
Linus Torvalds [Fri, 12 Apr 2019 15:16:40 +0000 (08:16 -0700)]
Merge tag 'mmc-v5.1-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- alcor: Stabilize data write requests
- sdhci-omap: Fix command error path during tuning
* tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
mmc: alcor: don't write data before command has completed
Linus Torvalds [Fri, 12 Apr 2019 15:11:59 +0000 (08:11 -0700)]
Merge tag 'sound-5.1-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Well, this one became unpleasantly larger than previous pull requests,
but it's a kind of usual pattern: now it contains a collection of ASoC
fixes, and nothing to worry too much.
The fixes for ASoC core (DAPM, DPCM, topology) are all small and just
covering corner cases. The rest changes are driver-specific, many of
which are for x86 platforms and new drivers like STM32, in addition to
the usual fixups for HD-audio"
* tag 'sound-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (66 commits)
ASoC: wcd9335: Fix missing regmap requirement
ALSA: hda: Fix racy display power access
ASoC: pcm: fix error handling when try_module_get() fails.
ASoC: stm32: sai: fix master clock management
ASoC: Intel: kbl: fix wrong number of channels
ALSA: hda - Add two more machines to the power_save_blacklist
ASoC: pcm: update module refcount if module_get_upon_open is set
ASoC: core: conditionally increase module refcount on component open
ASoC: stm32: fix sai driver name initialisation
ASoC: topology: Use the correct dobj to free enum control values and texts
ALSA: seq: Fix OOB-reads from strlcpy
ASoC: intel: skylake: add remove() callback for component driver
ASoC: cs35l35: Disable regulators on driver removal
ALSA: xen-front: Do not use stream buffer size before it is set
ASoC: rockchip: pdm: change dma burst to 8
ASoC: rockchip: pdm: fix regmap_ops hang issue
ASoC: simple-card: don't select DPCM via simple-audio-card
ASoC: audio-graph-card: don't select DPCM via audio-graph-card
ASoC: tlv320aic32x4: Change author's name
ALSA: hda/realtek - Add quirk for Tuxedo XC 1509
...
Linus Torvalds [Fri, 12 Apr 2019 15:07:46 +0000 (08:07 -0700)]
Merge tag 'acpi-5.1-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an ACPICA issue introduced during the 4.20 development cycle and
causing some systems to crash because of leftover operation region
data still maintained after the operation region in question has gone
away (Erik Schmauss)"
* tag 'acpi-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Namespace: remove address node from global list after method termination
Linus Torvalds [Fri, 12 Apr 2019 15:04:01 +0000 (08:04 -0700)]
Merge tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes across the driver spectrum this week, the mediatek fbdev support
might be a bit late for this round, but I looked over it and it's not
very large and seems like a useful feature for them.
Otherwise the main thing is a regression fix for i915 5.0 bug that
caused black screens on a bunch of Dell XPS 15s I think, I know at
least Fedora is waiting for this to land, and the udl fix is also for
a regression since 5.0 where unplugging the device would end badly.
core:
- make atomic hooks optional
i915:
- Revert a 5.0 regression where some eDP panels stopped working
- DSI related fixes for platforms up to IceLake
- GVT (regression fix, warning fix, use-after free fix)
amdgpu:
- Cursor fixes
- missing PCI ID fix for KFD
- XGMI fix
- shadow buffer handling after reset fix
udl:
- fix unplugging device crashes.
mediatek:
- stabilise MT2701 HDMI support
- fbdev support
tegra:
- fix for build regression in rc1.
sun4i:
- Allwinner A6 max freq improvements
- null ptr deref fix
dw-hdmi:
- SCDC configuration improvements
omap:
- CEC clock management policy fix"
* tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm: (32 commits)
gpu: host1x: Fix compile error when IOMMU API is not available
drm/i915/gvt: Roundup fb->height into tile's height at calucation fb->size
drm/i915/dp: revert back to max link rate and lane count on eDP
drm/i915/icl: Fix port disable sequence for mipi-dsi
drm/i915/icl: Ungate ddi clocks before IO enable
drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phy
drm/mediatek: using new factor for tvdpll for MT2701 hdmi phy
drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phy
drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phy
drm/mediatek: fix the rate and divder of hdmi phy for MT2701
drm/mediatek: fix possible object reference leak
drm/i915: Get power refs in encoder->get_power_domains()
drm/i915: Fix pipe_bpp readout for BXT/GLK DSI
drm/amd/display: Fix negative cursor pos programming (v2)
drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in sun8i_tcon_top_un/bind
drm/udl: add a release method and delay modeset teardown
drm/i915/gvt: Prevent use-after-free in ppgtt_free_all_spt()
drm/i915/gvt: Annotate iomem usage
drm/sun4i: DW HDMI: Lower max. supported rate for H6
Revert "Documentation/gpu/meson: Remove link to meson_canvas.c"
...
Will Deacon [Mon, 8 Apr 2019 11:45:09 +0000 (12:45 +0100)]
arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value
Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't
explicitly set the return value on the non-faulting path and instead
leaves it holding the result of the underlying atomic operation. This
means that any FUTEX_WAKE_OP atomic operation which computes a non-zero
value will be reported as having failed. Regrettably, I wrote the buggy
code back in 2011 and it was upstreamed as part of the initial arm64
support in 2012.
The reasons we appear to get away with this are:
1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get
exercised by futex() test applications
2. If the result of the atomic operation is zero, the system call
behaves correctly
3. Prior to version 2.25, the only operation used by GLIBC set the
futex to zero, and therefore worked as expected. From 2.25 onwards,
FUTEX_WAKE_OP is not used by GLIBC at all.
Fix the implementation by ensuring that the return value is either 0
to indicate that the atomic operation completed successfully, or -EFAULT
if we encountered a fault when accessing the user mapping.
Cc: <stable@kernel.org>
Fixes: 6170a97460db ("arm64: Atomic operations")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Ville Syrjälä [Thu, 11 Apr 2019 14:33:49 +0000 (17:33 +0300)]
drm/i915: Suppress spurious combo PHY B warning
On ICL the DMC doesn't reinit combo PHY B so we should not warn
about its state being bogus during the display core uninit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411143349.17934-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Thu, 11 Apr 2019 16:49:25 +0000 (19:49 +0300)]
drm/i915: Restore correct bxt_ddi_phy_calc_lane_lat_optim_mask() calculation
We are no longer calling bxt_ddi_phy_calc_lane_lat_optim_mask() when
intel{hdmi,dp}_compute_config() succeeds, and instead only call it
when those fail. This is fallout from the bool->int
.compute_config() conversion which failed to invert the return
value check before calling bxt_ddi_phy_calc_lane_lat_optim_mask().
Let's just replace it with an early bailout so that it's harder
to miss.
This restores the correct latency optim setting calculation
(which could fix some real failures), and avoids the
MISSING_CASE() from bxt_ddi_phy_calc_lane_lat_optim_mask()
after intel{hdmi,dp}_compute_config() has failed.
Cc: Lyude Paul <lyude@redhat.com>
Fixes: 204474a6b859 ("drm/i915: Pass down rc in intel_encoder->compute_config()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109373
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411164925.28491-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Chris Wilson [Fri, 12 Apr 2019 11:01:59 +0000 (12:01 +0100)]
drm/i915: Flush the CSB pointer reset
The HW resets it CSB tail pointer on resetting the engine. Most of the
time. In case it doesn't (and for system resume) we write the expected
value anyway. For extra paranoia, flush the write before we invalidate
the cacheline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412110159.10495-1-chris@chris-wilson.co.uk
Joerg Roedel [Fri, 12 Apr 2019 10:50:31 +0000 (12:50 +0200)]
iommu/amd: Set exclusion range correctly
The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register are treated as 0xfff by the
hardware for comparisons.
So correctly set the exclusion range in the hardware to the
last page which is _in_ the range.
Fixes: b2026aa2dce44 ('x86, AMD IOMMU: add functions for programming IOMMU MMIO space')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Miguel Ojeda [Sat, 30 Mar 2019 08:20:16 +0000 (09:20 +0100)]
clang-format: Update with the latest for_each macro list
Re-run the shell fragment that generated the original list now that
there are two dozens of new entries after v5.1's merge window.
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Peter Ujfalusi [Mon, 1 Apr 2019 12:41:43 +0000 (15:41 +0300)]
drm/bridge: ti-tfp410: Set the bus_format
The TFP410 supports 24 bit, single-edge and 12 bit, dual-edge modes.
Depending on how many wires are used (24/12) the driver can set the correct
bus_format.
If the information is not available in DT then assume 24 bit, single-edge
setup.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-3-peter.ujfalusi@ti.com
Peter Ujfalusi [Mon, 1 Apr 2019 12:41:42 +0000 (15:41 +0300)]
dt-bindings: display: tfp410: Add bus-width parameter property
tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or
12bit, dual-edge (12 lines).
Add bus-width to the documentation so it can be used to select between the
two connection scheme.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-2-peter.ujfalusi@ti.com
Peter Ujfalusi [Mon, 1 Apr 2019 12:33:42 +0000 (15:33 +0300)]
drm/bridge: ti-tfp410: Fall back to HPD polling if HPD irq is not available
In case either the HPD gpio is not specified or when the HPD gpio can not
be used as interrupt we should tell the core that the HPD needs to be
polled for detecting hotplug.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401123342.15767-1-peter.ujfalusi@ti.com
Radhakrishna Sripada [Sat, 30 Mar 2019 01:19:20 +0000 (18:19 -0700)]
drm/i915: Fix the inconsistent RMW in WA 827
RMW is used only in the disable path. Using it in enable path
for consistency.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190330011921.10397-2-radhakrishna.sripada@intel.com
Radhakrishna Sripada [Sat, 30 Mar 2019 01:19:19 +0000 (18:19 -0700)]
drm/i915: Rename skl_wa_clkgating to the actual WA
No functional change. Renaming the function to reflect the specific WA.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190330011921.10397-1-radhakrishna.sripada@intel.com
Peter Zijlstra [Thu, 4 Apr 2019 13:03:00 +0000 (15:03 +0200)]
perf/core: Fix perf_event_disable_inatomic() race
Thomas-Mich Richter reported he triggered a WARN()ing from event_function_local()
on his s390. The problem boils down to:
CPU-A CPU-B
perf_event_overflow()
perf_event_disable_inatomic()
@pending_disable = 1
irq_work_queue();
sched-out
event_sched_out()
@pending_disable = 0
sched-in
perf_event_overflow()
perf_event_disable_inatomic()
@pending_disable = 1;
irq_work_queue(); // FAILS
irq_work_run()
perf_pending_event()
if (@pending_disable)
perf_event_disable_local(); // WHOOPS
The problem exists in generic, but s390 is particularly sensitive
because it doesn't implement arch_irq_work_raise(), nor does it call
irq_work_run() from it's PMU interrupt handler (nor would that be
sufficient in this case, because s390 also generates
perf_event_overflow() from pmu::stop). Add to that the fact that s390
is a virtual architecture and (virtual) CPU-A can stall long enough
for the above race to happen, even if it would self-IPI.
Adding a irq_work_sync() to event_sched_in() would work for all hardare
PMUs that properly use irq_work_run() but fails for software PMUs.
Instead encode the CPU number in @pending_disable, such that we can
tell which CPU requested the disable. This then allows us to detect
the above scenario and even redirect the IPI to make up for the failed
queue.
Reported-by: Thomas-Mich Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Fri, 12 Apr 2019 04:46:10 +0000 (14:46 +1000)]
Merge branch 'drm-next-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-next
- Fixes for powerplay custom profiles
- DC bandwidth clean ups and fixes
- RAS fixes for vega20
- DC atomic resume fix
- Better plane handling in DC
- Freesync improvements
- Misc bug fixes and cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411031242.3337-1-alexander.deucher@amd.com
Dave Airlie [Fri, 12 Apr 2019 04:27:37 +0000 (14:27 +1000)]
Merge tag 'drm-misc-next-2019-04-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.2:
UAPI Changes:
- None
Cross-subsystem Changes:
-MAINTAINERS: Add moderation flag for lima mailing list (Randy)
-dt-bindings: Add Mali Bifrost bindings (Neil)
-dt-bindings: Add G12A compatibility strings to meson bindings (Neil)
Core Changes:
-Add a handful of format helpers (Gerd)
Driver Changes:
-cirrus: Driver rewrite megapatch (Gerd)
-meson: Add G12A support to meson driver (Neil)
-lima: Couple fixes (Qiang)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410194907.GA108842@art_vandelay
Dave Airlie [Fri, 12 Apr 2019 03:39:22 +0000 (13:39 +1000)]
Merge tag 'drm-intel-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Revert back to max link rate and lane count on eDP.
- DSI related fixes for all platforms including Ice Lake.
- GVT Fixes including one vGPU display plane size regression fix,
one for preventing use-after-free in ppgtt shadow free function,
and another warning fix for iomem access annotation.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411235832.GA6476@intel.com
Jason Yan [Fri, 12 Apr 2019 02:09:16 +0000 (10:09 +0800)]
block: fix the return errno for direct IO
If the last bio returned is not dio->bio, the status of the bio will
not assigned to dio->bio if it is error. This will cause the whole IO
status wrong.
ksoftirqd/21-117 [021] ..s. 4017.966090: 8,0 C N
4883648 [0]
<idle>-0 [018] ..s. 4017.970888: 8,0 C WS
4924800 + 1024 [0]
<idle>-0 [018] ..s. 4017.970909: 8,0 D WS
4935424 + 1024 [<idle>]
<idle>-0 [018] ..s. 4017.970924: 8,0 D WS
4936448 + 321 [<idle>]
ksoftirqd/21-117 [021] ..s. 4017.995033: 8,0 C R
4883648 + 336 [65475]
ksoftirqd/21-117 [021] d.s. 4018.001988: myprobe1: (blkdev_bio_end_io+0x0/0x168) bi_status=7
ksoftirqd/21-117 [021] d.s. 4018.001992: myprobe: (aio_complete_rw+0x0/0x148) x0=0xffff802f2595ad80 res=0x12a000 res2=0x0
We always have to assign bio->bi_status to dio->bio.bi_status because we
will only check dio->bio.bi_status when we return the whole IO to
the upper layer.
Fixes: 542ff7bf18c6 ("block: new direct I/O implementation")
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 11 Apr 2019 21:19:02 +0000 (14:19 -0700)]
Merge tag 'for-5.1-rc4-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix parsing of compression algorithm when set as a inode property,
this could end up with eg. 'zst' or 'zli' in the value
- don't allow trim on a filesystem with unreplayed log, this could
cause data loss if there are pending updates to the block groups that
would not be subject to trim after replay
* tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prop: fix vanished compression property after failed set
btrfs: prop: fix zstd compression parameter validation
Btrfs: do not allow trimming when a fs is mounted with the nologreplay option
Dave Airlie [Thu, 11 Apr 2019 20:55:20 +0000 (06:55 +1000)]
Merge tag 'drm-misc-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- core: Make atomic_enable and disable optional for CRTC
- dw-hdmi: Lower max frequency for the Allwinner H6, SCDC configuration
improvements for older controller versions
- omap: a fix for the CEC clock management policy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411151658.orm46ccd5zmrw27l@flea
Ville Syrjälä [Tue, 26 Mar 2019 14:49:02 +0000 (16:49 +0200)]
drm/i915: Do not enable FEC without DSC
Currently we enable FEC even when DSC is no used. While that is
theoretically valid supposedly there isn't much of a benefit from
this. But more importantly we do not account for the FEC link
bandwidth overhead (2.4%) in the non-DSC link bandwidth computations.
So the code may think we have enough bandwidth when we in fact
do not.
Cc: stable@vger.kernel.org
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 240999cf339f ("i915/dp/fec: Add fec_enable to the crtc state.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326144903.6617-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Chris Wilson [Tue, 9 Apr 2019 17:41:08 +0000 (18:41 +0100)]
drm/i915: Avoid reclaim taints from runtime-pm debug
As intel_runtime_pm_get/_put may be called from any blockable context,
we need to avoid allowing reclaim from our mallocs, as we need to
avoid tainting any mutexes held by the callers (as they may themselves
not allow for allocations as they are taken in the shrinker).
<4> [435.339331] WARNING: possible circular locking dependency detected
<4> [435.339364] 5.1.0-rc4-CI-Trybot_4116+ #1 Tainted: G U
<4> [435.339395] ------------------------------------------------------
<4> [435.339426] gem_caching/1334 is trying to acquire lock:
<4> [435.339456]
000000004505c39b (wakeref#3){+.+.}, at: intel_engine_pm_put+0x1b/0x40 [i915]
<4> [435.339788]
but task is already holding lock:
<4> [435.339819]
00000000ee77b4ed (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.24+0x0/0x30
<4> [435.339879]
which lock already depends on the new lock.
<4> [435.339918]
the existing dependency chain (in reverse order) is:
<4> [435.339952]
-> #1 (fs_reclaim){+.+.}:
<4> [435.339998] fs_reclaim_acquire.part.24+0x24/0x30
<4> [435.340035] kmem_cache_alloc_trace+0x2a/0x290
<4> [435.340311] __print_intel_runtime_pm_wakeref+0x24/0x160 [i915]
<4> [435.340590] untrack_intel_runtime_pm_wakeref+0x16e/0x1d0 [i915]
<4> [435.340869] intel_runtime_pm_put_unchecked+0xd/0x30 [i915]
<4> [435.341147] __intel_wakeref_put_once+0x22/0x40 [i915]
<4> [435.341508] i915_request_retire+0x477/0xaf0 [i915]
<4> [435.341871] ring_retire_requests+0x86/0x160 [i915]
<4> [435.342226] i915_retire_requests+0x58/0xc0 [i915]
<4> [435.342576] retire_work_handler+0x5b/0x70 [i915]
<4> [435.342615] process_one_work+0x245/0x610
<4> [435.342646] worker_thread+0x37/0x380
<4> [435.342679] kthread+0x119/0x130
<4> [435.342714] ret_from_fork+0x3a/0x50
<4> [435.342739]
-> #0 (wakeref#3){+.+.}:
<4> [435.342788] lock_acquire+0xa6/0x1c0
<4> [435.342822] __mutex_lock+0x8c/0x960
<4> [435.342853] atomic_dec_and_mutex_lock+0x33/0x50
<4> [435.343151] intel_engine_pm_put+0x1b/0x40 [i915]
<4> [435.343501] i915_request_retire+0x477/0xaf0 [i915]
<4> [435.343851] ring_retire_requests+0x86/0x160 [i915]
<4> [435.344202] i915_retire_requests+0x58/0xc0 [i915]
<4> [435.344543] i915_gem_shrink+0xd8/0x5b0 [i915]
<4> [435.344835] i915_drop_caches_set+0x17b/0x250 [i915]
<4> [435.344877] simple_attr_write+0xb0/0xd0
<4> [435.344911] full_proxy_write+0x51/0x80
<4> [435.344943] vfs_write+0xbd/0x1b0
<4> [435.344972] ksys_write+0x55/0xe0
<4> [435.345002] do_syscall_64+0x55/0x190
<4> [435.345040] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409174108.19396-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 11 Apr 2019 13:05:15 +0000 (14:05 +0100)]
drm/i915/execlists: Always reset the context's RING registers
During reset, we try and stop the active ring. This has the consequence
that we often clobber the RING registers within the context image. When
we find an active request, we update the context image to rerun that
request (if it was guilty, we replace the hanging user payload with
NOPs). However, we were ignoring an active context if the request had
completed, with the consequence that the next submission on that request
would start with RING_HEAD==0 and not the tail of the previous request,
causing all requests still in the ring to be rerun. Rare, but
occasionally seen within CI where we would spot that the context seqno
would reverse and complain that we were retiring an incomplete request.
<0> [412.390350] <idle>-0 3d.s2 408373352us : __i915_request_submit: rcs0 fence 1e95b:3640 -> current 3638
<0> [412.390350] <idle>-0 3d.s2 408373353us : __i915_request_submit: rcs0 fence 1e95b:3642 -> current 3638
<0> [412.390350] <idle>-0 3d.s2 408373354us : __i915_request_submit: rcs0 fence 1e95b:3644 -> current 3638
<0> [412.390350] <idle>-0 3d.s2 408373354us : __i915_request_submit: rcs0 fence 1e95b:3646 -> current 3638
<0> [412.390350] <idle>-0 3d.s2 408373356us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.1, fence 1e95b:3646 (current 3638), prio=4
<0> [412.390350] i915_sel-4613 0.... 408373374us : __i915_request_commit: rcs0 fence 1e95b:3648
<0> [412.390350] i915_sel-4613 0d..1 408373377us : process_csb: rcs0 cs-irq head=2, tail=3
<0> [412.390350] i915_sel-4613 0d..1 408373377us : process_csb: rcs0 csb[3]: status=0x00000001:0x00000000, active=0x1
<0> [412.390350] i915_sel-4613 0d..1 408373378us : __i915_request_submit: rcs0 fence 1e95b:3648 -> current 3638
<0> [412.390350] <idle>-0 3..s1 408373378us : execlists_submission_tasklet: rcs0 awake?=1, active=5
<0> [412.390350] i915_sel-4613 0d..1 408373379us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.2, fence 1e95b:3648 (current 3638), prio=4
<0> [412.390350] i915_sel-4613 0.... 408373381us : i915_reset_engine: rcs0 flags=4
<0> [412.390350] i915_sel-4613 0.... 408373382us : execlists_reset_prepare: rcs0: depth<-0
<0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 cs-irq head=3, tail=4
<0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 csb[4]: status=0x00008002:0x00000002, active=0x1
<0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 out[0]: ctx=2.2, fence 1e95b:3648 (current 3640), prio=4
<0> [412.390350] i915_sel-4613 0.... 408373401us : intel_engine_stop_cs: rcs0
<0> [412.390350] i915_sel-4613 0d..1 408373402us : process_csb: rcs0 cs-irq head=4, tail=4
<0> [412.390350] i915_sel-4613 0.... 408373403us : intel_gpu_reset: engine_mask=1
<0> [412.390350] i915_sel-4613 0d..1 408373408us : execlists_cancel_port_requests: rcs0:port0 fence 1e95b:3648, (current 3648)
<0> [412.390350] i915_sel-4613 0.... 408373442us : intel_engine_cancel_stop_cs: rcs0
<0> [412.390350] i915_sel-4613 0.... 408373442us : execlists_reset_finish: rcs0: depth->0
<0> [412.390350] ksoftirq-26 3..s. 408373442us : execlists_submission_tasklet: rcs0 awake?=1, active=0
<0> [412.390350] ksoftirq-26 3d.s1 408373443us : process_csb: rcs0 cs-irq head=5, tail=5
<0> [412.390350] i915_sel-4613 0.... 408373475us : i915_request_retire: rcs0 fence 1e95b:3640, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373476us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3640, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373494us : __i915_request_commit: rcs0 fence 1e95b:3650
<0> [412.390350] i915_sel-4613 0d..1 408373496us : process_csb: rcs0 cs-irq head=5, tail=5
<0> [412.390350] i915_sel-4613 0d..1 408373496us : __i915_request_submit: rcs0 fence 1e95b:3650 -> current 3648
<0> [412.390350] i915_sel-4613 0d..1 408373498us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.1, fence 1e95b:3650 (current 3648), prio=6
<0> [412.390350] i915_sel-4613 0.... 408373500us : i915_request_retire_upto: rcs0 fence 1e95b:3648, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373500us : i915_request_retire: rcs0 fence 1e95b:3642, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373501us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3642, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373514us : i915_request_retire: rcs0 fence 1e95b:3644, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373515us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3644, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373527us : i915_request_retire: rcs0 fence 1e95b:3646, current 3640
<0> [412.390350] <idle>-0 3..s1 408373569us : execlists_submission_tasklet: rcs0 awake?=1, active=1
<0> [412.390350] <idle>-0 3d.s2 408373569us : process_csb: rcs0 cs-irq head=5, tail=1
<0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 csb[0]: status=0x00000001:0x00000000, active=0x1
<0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 csb[1]: status=0x00000018:0x00000002, active=0x5
<0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 out[0]: ctx=2.1, fence 1e95b:3650 (current 3650), prio=6
<0> [412.390350] <idle>-0 3d.s2 408373571us : process_csb: rcs0 completed ctx=2
<0> [412.390350] i915_sel-4613 0.... 408373621us : i915_request_retire: i915_request_retire:253 GEM_BUG_ON(!i915_request_completed(request))
v2: Fixup the cancellation path to drain the CSB and reset the pointers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411130515.20716-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 11 Apr 2019 13:05:14 +0000 (14:05 +0100)]
drm/i915/guc: Implement reset locally
Before causing guc and execlists to diverge further (breaking guc in the
process), take a copy of the current reset procedure and make it local to
the guc submission backend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411130515.20716-1-chris@chris-wilson.co.uk
Mika Kuoppala [Thu, 11 Apr 2019 08:30:34 +0000 (11:30 +0300)]
drm/i915: Disable read only ppgtt support for gen11
On gen11 writing to read only ppgtt page causes a gpu hang.
This behaviour is different than with previous gen where
read only ppgtt access is supported. On those, the write
is just dropped without visible side effects.
Disable ro ppgtt support on gen11 until a solution can
be found to bring it into line with its predecessors.
References: HSDES#
1807136187
References: https://bugzilla.freedesktop.org/show_bug.cgi?id=108569
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411083034.28311-1-mika.kuoppala@linux.intel.com
Chris Wilson [Thu, 11 Apr 2019 12:24:45 +0000 (13:24 +0100)]
drm/i915: Call i915_sw_fence_fini on request cleanup
As i915_requests are put into an RCU-freelist, they may get reused
before debugobjects notice them as being freed. On cleanup, explicitly
call i915_sw_fence_fini() so that the debugobject is properly tracked.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411122445.20060-1-chris@chris-wilson.co.uk
Trond Myklebust [Thu, 11 Apr 2019 19:16:52 +0000 (15:16 -0400)]
Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping"
This reverts commit
009a82f6437490c262584d65a14094a818bcb747.
The ability to optimise here relies on compiler being able to optimise
away tail calls to avoid stack overflows. Unfortunately, we are seeing
reports of problems, so let's just revert.
Reported-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Olga Kornievskaia [Thu, 11 Apr 2019 18:34:18 +0000 (14:34 -0400)]
NFSv4.1 fix incorrect return value in copy_file_range
According to the NFSv4.2 spec if the input and output file is the
same file, operation should fail with EINVAL. However, linux
copy_file_range() system call has no such restrictions. Therefore,
in such case let's return EOPNOTSUPP and allow VFS to fallback
to doing do_splice_direct(). Also when copy_file_range is called
on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support
COPY functionality), we also need to return EOPNOTSUPP and
fallback to a regular copy.
Fixes xfstest generic/075, generic/091, generic/112, generic/263
for all NFSv4.x versions.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Chuck Lever [Tue, 9 Apr 2019 21:04:09 +0000 (17:04 -0400)]
xprtrdma: Fix helper that drains the transport
We want to drain only the RQ first. Otherwise the transport can
deadlock on ->close if there are outstanding Send completions.
Fixes: 6d2d0ee27c7a ("xprtrdma: Replace rpcrdma_receive_wq ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Chuck Lever [Tue, 9 Apr 2019 14:44:16 +0000 (10:44 -0400)]
NFS: Fix handling of reply page vector
NFSv4 GETACL and FS_LOCATIONS requests stopped working in v5.1-rc.
These two need the extra padding to be added directly to the reply
length.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 02ef04e432ba ("NFS: Account for XDR pad of buf->pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>