Merge branch 'forlinus' of git://parisc-linux.org/home/kyle/git/parisc-2.6

Merge master.kernel.org:/home/rmk/linux-2.6-mmc

Merge master.kernel.org:/home/rmk/linux-2.6-arm

Minor manual fixups for gfp_t clashes.

Auto-update from upstream

Merge branch 'sx8' of /linux/kernel/git/jgarzik/misc-2.6

Merge branch 'upstream' of /linux/kernel/git/jgarzik/libata-dev

Merge branch 'upstream' of /linux/kernel/git/jgarzik/netdev-2.6

Merge branch 'elevator-switch' of git://brick.kernel.dk/data/git/linux-2.6-block

Manual fixup for trivial "gfp_t" changes.

Merge branch 'generic-dispatch' of git://brick.kernel.dk/data/git/linux-2.6-block

Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

[ARM] 3042/1: AAED-2000 - LCD panel informations

Patch from Bellido Nicolas

The AAED-2000 is equiped with an 640x480 LCD.
This adds the parameters that will be passed to the AAEC-2000 platform code.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3041/1: AAEC-2000 - CLCD controller platform glue

Patch from Bellido Nicolas

The AAEC-2000 has an ARM PrimeCell PL110 Color LCD Controller.
This patch contains the platform glue that will be used by specific boards.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3040/1: AAEC-2000 - Preliminary clock interface support

Patch from Bellido Nicolas

Here is a preliminary clock interface support for the AAEC-2000.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3039/1: AAEC-2000 - Add MTD support

Patch from Bellido Nicolas

This adds platform code for MTD devices on AAEC-2000.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3038/1: AAEC-2000 - Proper includes in hardware.h

Patch from Bellido Nicolas

linux/config.h is not necessary in hardware.h, while asm/sizes.h and asm/arch//aaec2000.h will be used later.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3037/1: AAED-2000 - Add defines for GPIO registers on external port.

Patch from Bellido Nicolas

The AAED-2000 board has GPIO pins on an external port.
This patch adds the defines, and do the necessary mapping.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3036/1: AAEC-2000 - Add defines for GPIO registers

Patch from Bellido Nicolas

Add defines for GPIO registers on the AAEC-2000 processor.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge /pub/scm/linux/kernel/git/acme/net-2.6.15

[ARM] 2897/2: PXA2xx IRDA support

Patch from Nicolas Pitre

This is the PXA2xx common IRDA driver, plus platform support
for Lubbock and Mainstone.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3035/1: RISCOS compat code fix

Patch from Nicolas Pitre

From: Daniel Jacobowitz <dan@debian.org>

> I also fixed a bug that confused me greatly while trying to debug: one
> SIGILL has long been a SIGSEGV because of some broken RISCOS
> compatibility code.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3031/1: fix typos in comments of mmc.h

Patch from Erik Hovland

I noticed that the same typo (i before c in associated) showed up twice
in the file kernel/include/linux/mmc/mmc.h.

This patch fixes both of the instances I found with this mistake. The
typos are in comments and should have no affect on working code.

E

Signed-off-by: Erik Hovland <erik@hovland.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2921/1: Support for the RTC / nvram on the Comdial MP1000

Patch from Jon Ringle

This adds support for the RTC and nvram on the Comdial MP1000

Signed-off-by: Jon Ringle
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3029/1: Add HWUART support for PXA 255/26x

Patch from Matt Reimer

Adds support for HWUART on PXA 255 / 26x. This patch originally came from
http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch
and has been tweaked by me.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2787/2: PXA27x low power modes support

Patch from Todd Poynor

Add symbols for PXA2xx PWRMODE register M field that selects low-power
mode, replace unadorned constants.  Honor power mode parameter of
pxa_cpu_suspend(mode), no longer force to 3 (sleep).  Full Deep Sleep
low-power mode support for PXA27x is pending generic PM interfaces to
select more than 2 suspend-to-RAM-style power modes, but this is
expected soon. This can be hardcoded in the meantime by replacing the
pxa_cpu_suspend() parameter value.  From David Burrage and Todd Poynor.
Try #2 removes one of the register copies and moves the code to save the
pxa_cpu_suspend parameter to immediately surround the call that requires
the parameter value be preserved.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000

Patch from Jon Ringle

This patch gives support for the CS8900A ethernet chip on the Comdial MP1000

Signed-off-by: Jon Ringle
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2918/1: [update] Base port of Comdial MP1000 platfrom

Patch from Jon Ringle

Updated 2898/1 per comments:
- Removed fixup
- Moved code in mach-mp1000/ to mach-clps711x/
- Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom
Please comment.

Signed-off-by: Jon Ringle
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[PATCH] gfp_t: the rest

zone handling, mapping->flags handling

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: reiserfs mapping_set_gfp_mask() use

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: remaining bits of drivers/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: drivers/net

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: remaining bits of arch/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: sound

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: drivers/infiniband

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: drivers/scsi

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: kernel/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: drivers/usb

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (simple cases)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (xtensa)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (amd64)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (sh)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (ppc)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (parisc)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (mips)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (frv)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (cris)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (alpha)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (ia64)

... and related annotations for amd64 - swiotlb code is shared, but
prototypes are not.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (arm)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: block layer core

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: fs/*

 - ->releasepage() annotated (s/int/gfp_t), instances updated
 - missing gfp_t in fs/* added
 - fixed misannotation from the original sweep caught by bitwise checks:
   XFS used __nocast both for gfp_t and for flags used by XFS allocator.
   The latter left with unsigned int __nocast; we might want to add a
   different type for those but for now let's leave them alone.  That,
   BTW, is a case when __nocast use had been actively confusing - it had
   been used in the same code for two different and similar types, with
   no way to catch misuses.  Switch of gfp_t to bitwise had caught that
   immediately...

One tricky bit is left alone to be dealt with later - mapping->flags is
a mix of gfp_t and error indications.  Left alone for now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: net/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: lib/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: mm/* (easy parts)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: infrastructure

Beginning of gfp_t annotations:

 - -Wbitwise added to CHECKFLAGS
 - old __bitwise renamed to __bitwise__
 - __bitwise defined to either __bitwise__ or nothing, depending on
   __CHECK_ENDIAN__ being defined
 - gfp_t switched from __nocast to __bitwise__
 - force cast to gfp_t added to __GFP_... constants
 - new helper - gfp_zone(); extracts zone bits out of gfp_t value and casts
   the result to int

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[ARM] 3048/1: register i2s resources not i2c resources for the pxa i2s platform device

Patch from Ian Campbell

As noted by Uli Luckas in the comments of 3025 there is a typo in the i2s platform device. The i2s platform device refers to the i2c resources.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3047/1: SMDK2440 - add framebuffer platform data

Patch from Ben Dooks

Add platform data for framebuffer for the
onboard LCD module

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3046/1: BAST - add framebuffer platform data

Patch from Ben Dooks

Add framebuffer platform data

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3045/2: S3C2410 - change init for lcd platform data

Patch from Ben Dooks

Change set_s3c2410fb_info to s3c2410_fb_set_platdata
and use kmalloc() for the copy of the information it
is passed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2908/1: add register definitions for ixp2000 msf

Patch from Lennert Buytenhek

We already had a mapping for the msf, but we didn't have any
register definitions for it yet.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3044/1: Fix sparse warnings about incompatible pointer types for register defined in pxa-regs.h

Patch from Ian Campbell

The sparse warning initially surfaced in sound/arm/pxa2xx-ac97.c
because it was using u32 * variables to hold the unsigned long *
register addresses.

I submitted an ALSA patch for this http://thread.gmane.org/gmane.linux.alsa.devel/27804 issue and it was suggested that it might be preferable to change the register
definitions to use u32.

Most other subarches seem to use u32 for their register type, at least
the ones which use a __REG macro (like the PXA) do. Nico indicated in
the thread above that he wouldn't mind this patch.

Changing the type required fixes for opposite warnings in the pxa2xx usb
gadget code but that was the only new warning introduced on defconfig
or lubbock, mainstone and our own PXA255 boards.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3034/1: S3C2410 - fix size of devices in devs.c

Patch from Ben Dooks

From: Guillaume GOURAT <guillaume.gourat@nexvision.fr>

A number of devices have an extra byte on the
end of their areas due to mis-calculating the
.end field of their resources

Signed-off-by: Guillaume GOURAT <guillaume.gourat@nexvision.fr>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3033/1: S3C2410 - add generic gpio_cfgpin options

Patch from Ben Dooks

Add generic values for the parameters to the
s3c2410_gpio_cfgpin() function, so that a caller
does not need to know the exact constant for
the specified pin.

This is very useful for the case where a driver
is passed a gpio pin number and needs to reconfigure
the pin's function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2930/1: optimized sha1 implementation for ARM

Patch from Nicolas Pitre

Here's an ARM assembly SHA1 implementation to replace the default C
version. It is approximately 50% faster than the generic C version. On
an XScale processor running at 400MHz:
generic C version: 9.8 MB/s
my version: 14.5 MB/s
This code is useful to quite a few callers in the tree:
crypto/sha1.c: sha_transform(sctx->state, sctx->buffer, temp);
crypto/sha1.c: sha_transform(sctx->state, &data[i], temp);
drivers/char/random.c: sha_transform(buf, (__u8 *)r->pool+i, buf + 5);
drivers/char/random.c: sha_transform(buf, (__u8 *)data, buf + 5);
net/ipv4/syncookies.c: sha_transform(tmp + 16, (__u8 *)tmp, tmp + 16 + 5);

Signed-off-by: Nicolas Pitre <nico@cam.org>
Seems to work fine on big-endian as well.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3017/1: Add support for 36-bit addresses to create_mapping()

Patch from Deepak Saxena

This patch adds support for 36-bit static mapped I/O. While there
are no platforms in the tree ATM that use it, it has been tested
tested on the IXP2350 NPU and I would like to get the support for
that chipset upstream one piece at a time. There are also other
Intel chipset ports in development that are waiting on this to go
upstream.

The patch replaces the print formats for physical addresses with
%016llx which will create a bit extraneous output on 32-bit systems,
but I think that is cleaner than having #ifdefs, specially since
users will only see the output in error cases.

Depends on 3016/1.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3016/1: Replace map_desc.physical with map_desc.pfn

Patch from Deepak Saxena

Convert map_desc.physical to map_desc.pfn. This allows us to add
support for 36-bit addressed physical devices in the static maps
without having to resort to u64 variables.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3001/1: Replace map_desc.physical with map_desc.pfn: Integrator

Patch from Deepak Saxena

Integrator map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3000/1: Replace map_desc.physical with map_desc.pfn: iMX

Patch from Deepak Saxena

iMX map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2999/1: Replace map_desc.physical with map_desc.pfn: H720x

Patch from Deepak Saxena

H720x map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2998/1: Replace map_desc.physical with map_desc.pfn: Footbridge

Patch from Deepak Saxena

Footbridge map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2997/1: Replace map_desc.physical with map_desc.pfn: EBSA110

Patch from Deepak Saxena

EBSA110 map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2996/1: Replace map_desc.physical with map_desc.pfn: EPXA10DB

Patch from Deepak Saxena

EPXA10DB mapd_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2995/1: Replace map_desc.physical with map_desc.pfn: Versatile

Patch from Deepak Saxena

Versatile map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2994/1: Replace map_desc.physical with map_desc.pfn: CLPS7500

Patch from Deepak Saxena

CLSP7500 map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2993/1: Replace map_desc.physical with map_desc.pfn: CLPS711x

Patch from Deepak Saxena

CLSP711x map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2992/1: Replace map_desc.physical with map_desc.pfn: SA1100

Patch from Deepak Saxena

SA1100 map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2991/1: Replace map_desc.physical with map_desc.pfn: Shark

Patch from Deepak Saxena

Shark map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2990/1: Replace map_desc.physical with map_desc.pfn: S3C2410

Patch from Deepak Saxena

S3C2410 map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2989/1: Replace map_desc.physical with map_desc.pfn: RiscPC

Patch from Deepak Saxena

RiscPC map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2988/1: Replace map_desc.physical with map_desc.pfn: PXA

Patch from Deepak Saxena

PXA map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2987/1: Replace map_desc.physical with map_desc.pfn: OMAP

Patch from Deepak Saxena

OMAP map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2986/1: Replace map_desc.physical with map_desc.pfn: LH7A40x

Patch from Deepak Saxena

LH7A40x map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2985/1: Replace map_desc.physical with map_desc.pfn: IXP4xx

Patch from Deepak Saxena

IXP4xx map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2984/1: Replace map_desc.physical with map_desc.pfn: IXP2000

Patch from Deepak Saxena

IXP2000 map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2983/1: Replace map_desc.physical with map_desc.pfn: IOP3xx

Patch from Deepak Saxena

IOP3xx map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2982/1: Replace map_desc.physical with map_desc.pfn: aaec2000

Patch from Deepak Saxena

aaec2000 map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4/4 Combine oprofile common and init code

There is nothing special about having the init code separate from
the common code, so combine the two.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3/4 Rename common oprofile code

The common oprofile code assumes the name "PMU" (from Intel's
performance management unit).  This is misleading when we
start adding oprofile support for other machine types which
don't use the same terminology.  Call it op_arm_* instead of
pmu_*.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2/4 Fix oprofile suspend/resume

The oprofile suspend/resume was missing locking.  If we failed
to start oprofile on resume, we still reported that it was
enabled.  Instead, disable oprofile on error.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 1/4 Move oprofile driver model code

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Re-jig bootmem initialisation

Make ARM independent of the way bootmem operates internally.  We
now map each node as we initialise it, and place the bootmem bitmap
inside each node, rather than all in the first node.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Fix sparse warnings

Fix sparse warnings in arch/arm/kernel/module.c,
arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c,
and platform support files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3/4: Remove asm/hardware.h from SA1100 io.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2/4: Remove asm/hardware.h from asm-arm/arch-ebsa110/io.h

EBSA110 only requires hardware.h to be included for a couple of
files.  Move the include there.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 1/4: Move include of asm/hardware.h to asm-arm/arch-*/io.h

Including asm/hardware.h into asm/io.h can cause #define clashes
between platform specific definitions and driver local definitions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[BLOCK] Leftover reference to ->max_back_kb

Signed-off-by: Jens Axboe <axboe@suse.de>

[BLOCK] elevator switch fixes/cleanup

- 100msec sleep is a little excessive, lots of requests can complete
  in that timeframe. Use 10msec instead.
- Rename QUEUE_FLAG_BYPASS to QUEUE_FLAG_ELVSWITCH to indicate what
  is going on.

Signed-off-by: Jens Axboe <axboe@suse.de>

[BLOCK] Reimplement elevator switch

 This patch reimplements elevator switch.  This patch assumes generic
dispatch queue patchset is applied.

 * Each request is tagged with REQ_ELVPRIV flag if it has its elevator
   private data set.
 * Requests which doesn't have REQ_ELVPRIV flag set never enter
   iosched.  They are always directly back inserted to dispatch queue.
   Of course, elevator_put_req_fn is called only for requests which
   have its REQ_ELVPRIV set.
 * Request queue maintains the current number of requests which have
   its elevator data set (elevator_set_req_fn called) in
   q->rq->elvpriv.
 * If a request queue has QUEUE_FLAG_BYPASS set, elevator private data
   is not allocated for new requests.

 To switch to another iosched, we set QUEUE_FLAG_BYPASS and wait until
elvpriv goes to zero; then, we attach the new iosched and clears
QUEUE_FLAG_BYPASS.  New implementation is much simpler and main code
paths are less cluttered, IMHO.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>

[BLOCK] kill generic max_back_kb handling

This patch kills max_back_kb handling from elv_dispatch_sort() and
kills max_back_kb field from struct request_queue.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>

[PATCH] 05/05 update biodoc to match new generic dispatch api

Updates biodoc to reflect changes in elevator API

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>