Lespiau, Damien [Mon, 24 Mar 2014 15:53:14 +0000 (15:53 +0000)]
drm: Remove the now unused DRM_LOG* macros
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lespiau, Damien [Mon, 24 Mar 2014 15:53:13 +0000 (15:53 +0000)]
staging: imx-drm: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lespiau, Damien [Mon, 24 Mar 2014 15:53:12 +0000 (15:53 +0000)]
drm/i915: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lespiau, Damien [Mon, 24 Mar 2014 15:53:11 +0000 (15:53 +0000)]
drm/gma500: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lespiau, Damien [Mon, 24 Mar 2014 15:53:10 +0000 (15:53 +0000)]
drm/exynos: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lespiau, Damien [Mon, 24 Mar 2014 15:53:09 +0000 (15:53 +0000)]
drm: Remove the unused (and unusable) DRM_LOG_MODE()
This macro was trying to use the non existing DRM_UT_MODE debug category
and looks like it should be covered by DRM_LOG_KMS().
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lespiau, Damien [Mon, 24 Mar 2014 15:53:08 +0000 (15:53 +0000)]
drm: Refresh the explanation of debug categories
That comment wasn't super-readable, so I tried to improve it:
- Put the comment before the values it's documenting
- Add a mention to PRIME
- Reword things a bit to be a lighter read
- Add a note about the option to set the debug value at run-time
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arnd Bergmann [Tue, 25 Mar 2014 11:06:46 +0000 (12:06 +0100)]
drm/bridge: PTN3460 needs DRM_KMS_HELPER
The recently added PTN3460 device driver uses interfaces that
are provided by the KMS helper infrastructure, so we should
explicitly select that to avoid this linker error:
ERROR: "drm_helper_probe_single_connector_modes" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!
ERROR: "drm_helper_connector_dpms" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!
We have to drop the I2C dependency to avoid a circular dependency
chain, but that's ok because DRM already selects I2C.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 26 Mar 2014 04:34:16 +0000 (14:34 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
- first stage of (ongoing) gpu fault recovery work
- initial support for maxwell (binary driver fw needed)
- various random fixes across the board
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits)
drm/nouveau: fix missing newline
drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses
drm/nouveau/therm: let the vbios decide on the automatic fan management mode
drm/nvd7/therm: handle another kind of PWM fans
drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling
drm/nouveau: fix small thinko in vblank timestamping.
drm/nouveau/therm: check for sensor presence with requested mode, not current
drm/nouveau/disp/dp: allow 540MHz data rate
drm/nouveau: recognise higher link rate for available dp bw calculations
drm/nouveau/disp: limit dp capabilities as per dcb
drm/nva3/fbram: restrict training pattern setup to GT218
drm/nva3/devinit: restrict script access to some PFB regs
drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok
drm/nouveau/bios: have strap reads show on devinit spam debug level
drm/nv50/gpio: fixup reset for gpios >= 16
drm/nv50/gpio: exclude sense value from mask when changing registers
drm/gk104/gr: therm magic needed on some kepler boards
drm/gm107/gr: initial support
drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx
drm/nouveau/bios: parsing of some random table needed to bring up gr
...
Alexandre Courbot [Mon, 24 Mar 2014 08:42:23 +0000 (17:42 +0900)]
drm/nouveau: fix missing newline
Add a missing newline at the end of a DRM_INFO message.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Tue, 25 Mar 2014 21:23:23 +0000 (22:23 +0100)]
drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses
Other kind of accesses are unreliable on Kepler cards. As advised by NVIDIA,
let's only use 32-bit accesses to fetch the vbios from PROM.
This fixes vbios fetching on my nve7 which failed in certain specific
conditions.
I suggest we Cc stable, for all kernels they still maintain after the big
rewrite.
Suggested-by: Christian Zander <czander@nvidia.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Wed, 19 Feb 2014 00:04:56 +0000 (01:04 +0100)]
drm/nouveau/therm: let the vbios decide on the automatic fan management mode
This should fix automatic fan management on fermi cards who do not have
0x46 entries in the thermal table.
On my nve6, the blob sets the default linear range from 40°C to 100°C
but my nvcf's default values are 40°C to 85°C. Let's keep 85 as a default
for everyone.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Timothée Ravier <tim@siosm.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Tue, 18 Feb 2014 02:56:11 +0000 (03:56 +0100)]
drm/nvd7/therm: handle another kind of PWM fans
This should fix fan management on many nvd7+ chipsets.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Timothée Ravier <tim@siosm.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Thu, 13 Mar 2014 23:26:52 +0000 (00:26 +0100)]
drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling
This should fix a deadlock that has been reported to us where fan_update()
would hold the fan lock and try to grab the alarm_program_lock to reschedule
an update. On an other CPU, the alarm_program_lock would have been taken
before calling fan_update(), leading to a deadlock.
We should Cc: <stable@vger.kernel.org> # 3.9+
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Timothée Ravier <tim@siosm.fr>
Tested-by: Boris Fersing (IRC nick fersingb, no public email address)
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Mario Kleiner [Wed, 19 Mar 2014 09:02:11 +0000 (10:02 +0100)]
drm/nouveau: fix small thinko in vblank timestamping.
*hpos horizontal scanout position doesn't need to be corrected
to count the pixels between hactive end and htotal negative.
That is only needed for *vpos to count lines until end of
vblank for the vblank timestamping.
Use hpos as is without correction.
Removes occassional spikes in timestamps of up to 1 scanline
duration, thereby improves accuracy to about +/- 2 usecs instead
of +/- 12 usecs, wrt. true onset time as measured with high
precision equipment on NV-A5.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Mar 2014 03:34:47 +0000 (13:34 +1000)]
drm/nouveau/therm: check for sensor presence with requested mode, not current
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Wed, 19 Mar 2014 14:45:55 +0000 (10:45 -0400)]
drm/nouveau/disp/dp: allow 540MHz data rate
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76319
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 19 Mar 2014 23:32:01 +0000 (09:32 +1000)]
drm/nouveau: recognise higher link rate for available dp bw calculations
I should resurrect/merge that cleanup branch to remove the weird
duplication.. One day.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 19 Mar 2014 23:28:00 +0000 (09:28 +1000)]
drm/nouveau/disp: limit dp capabilities as per dcb
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 18 Mar 2014 19:23:10 +0000 (05:23 +1000)]
drm/nva3/fbram: restrict training pattern setup to GT218
It doesn't look like the others have the registers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 18 Mar 2014 17:08:21 +0000 (03:08 +1000)]
drm/nva3/devinit: restrict script access to some PFB regs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 18 Mar 2014 16:56:29 +0000 (02:56 +1000)]
drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 18 Mar 2014 14:55:02 +0000 (00:55 +1000)]
drm/nouveau/bios: have strap reads show on devinit spam debug level
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 18 Mar 2014 14:46:47 +0000 (00:46 +1000)]
drm/nv50/gpio: fixup reset for gpios >= 16
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 18 Mar 2014 14:35:44 +0000 (00:35 +1000)]
drm/nv50/gpio: exclude sense value from mask when changing registers
Shouldn't effect anything, was just momentarily confusing while looking
at traces.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 5 Mar 2014 04:46:48 +0000 (14:46 +1000)]
drm/gk104/gr: therm magic needed on some kepler boards
Not needed everywhere, and potentially not safe to do depending on how
the rest of PTHERM is configured...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 4 Mar 2014 01:00:41 +0000 (11:00 +1000)]
drm/gm107/gr: initial support
Our ucode only partially works at this point, so requiring binary fw
image for now.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 7 Mar 2014 02:33:56 +0000 (12:33 +1000)]
drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 4 Mar 2014 10:57:50 +0000 (20:57 +1000)]
drm/nouveau/bios: parsing of some random table needed to bring up gr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 4 Mar 2014 05:45:35 +0000 (15:45 +1000)]
drm/nv50/bar: fix plymouth issues on certain efi macbooks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:56 +0000 (16:18 +1000)]
drm/nouveau: fix fbcon not being accelerated after suspend
This does *not* (and is not intended to) fix the issue reported by
Christoph Rudorff on the nouveau mailinglist.
The patch proposed (which is similar to this one, but also reorders
whether we disable accel or call fb_set_suspend first), papers over
another problem entirely by avoiding touching the framebuffer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:56 +0000 (16:18 +1000)]
drm/gf100-/gr: split ppc state into its subunits
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:56 +0000 (16:18 +1000)]
drm/gf100-/gf: split tpc state into its subunits
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:56 +0000 (16:18 +1000)]
drm/gf100-/gr: split gpc state into its subunits
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:55 +0000 (16:18 +1000)]
drm/gf100-/gr: tidy reg/ctx initval lists, mostly by giving them names
Unit names come from the Android GK20A driver.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:55 +0000 (16:18 +1000)]
drm/gk110/gr: minor adjustment to some random initval
Change from traces of a newer binary driver version.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:55 +0000 (16:18 +1000)]
drm/gk104/gr: minor adjustment to some random initval
Change from traces of a newer binary driver version.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:55 +0000 (16:18 +1000)]
drm/gf119/gr: fix bug in some random initval
Bug noticed vs traces.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:55 +0000 (16:18 +1000)]
drm/gf110/gr: fixup gpc/tpc initvals lists
Differences noted vs traces.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:55 +0000 (16:18 +1000)]
drm/gk208/gr: minor adjustment to some random initval
Change from traces of a newer binary driver version.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:55 +0000 (16:18 +1000)]
drm/gf108/gr: minor adjustment to some random initval
Bug noticed vs traces.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 3 Mar 2014 06:18:55 +0000 (16:18 +1000)]
drm/gf104/gr: rename gf104 (nvc4), it came before gf106 (nvc3)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 26 Feb 2014 02:02:08 +0000 (12:02 +1000)]
drm/nvc0-/graph: fix gpccs fuc stack setup
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 26 Feb 2014 00:14:15 +0000 (10:14 +1000)]
drm/nouveau/bios: add more checks to PRAMIN image fetching
Prevents an attempt to access VRAM on an un-posted board, which, on a
particular system with a GRID K1 installed, causes a MCE and chokes
the entire system.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Mon, 17 Feb 2014 06:17:26 +0000 (15:17 +0900)]
support for platform devices
Upcoming mobile Kepler GPUs (such as GK20A) use the platform bus instead
of PCI to which Nouveau is tightly dependent. This patch allows Nouveau
to handle platform devices by:
- abstracting PCI-dependent functions that were typically used for
resource querying and page mapping,
- introducing a nv_device_is_pci() function that allows to make
PCI-dependent code conditional,
- providing a nouveau_drm_platform_probe() function that takes a GPU
platform device to be probed.
Core code as well as engine/subdev drivers are updated wherever possible
to make use of these functions. Some older drivers are too dependent on
PCI to be properly updated, but all newer code on which future chips may
depend should at least be runnable with platform devices.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 04:29:55 +0000 (14:29 +1000)]
drm/nouveau: support modesetting on GM107
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 01:28:37 +0000 (11:28 +1000)]
drm/gm100/device: recognise GM107
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 04:26:44 +0000 (14:26 +1000)]
drm/gm107/disp: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 04:17:49 +0000 (14:17 +1000)]
drm/gm107/ltcg: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 03:41:08 +0000 (13:41 +1000)]
drm/nouveau/bios: add HDMI-C (mini) connector type
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 03:28:33 +0000 (13:28 +1000)]
drm/gm107/fb: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 02:41:57 +0000 (12:41 +1000)]
drm/gk20a/timer: initial implementation
A bit different from NVIDIA's RFC patch, but I want this now for GM107.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 02:30:06 +0000 (12:30 +1000)]
drm/gm100/bios: hw disable register has moved
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 02:28:37 +0000 (12:28 +1000)]
drm/gm107/devinit: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 24 Feb 2014 05:33:27 +0000 (15:33 +1000)]
drm/nve0/fifo: bind intr
Error code names from Android GK20A driver.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:50:50 +0000 (23:50 +1000)]
drm/nve0/fifo: attempt to recover from engine ctxsw timeouts
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Wed, 26 Mar 2014 04:00:53 +0000 (14:00 +1000)]
Merge branch 'drm-next-3.15' of git://people.freedesktop.org/~deathsimple/linux into drm-next
this is the third pull request for 3.15 radeon changes. Highlights this time:
- More DP work from Alex, especially making use of the new DP aux helpers
- Marek's 1D and linear tiling fixes for CIK
* 'drm-next-3.15' of git://people.freedesktop.org/~deathsimple/linux:
drm/radeon: set PIPE_CONFIG for 1D and linear tiling modes on CIK
drm/radeon: use drm_dp_dpcd_read_link_status()
drm/radeon: use the new drm helpers for dp aux
drm/dp: make aux retries less chatty
drm/radeon: clarify special handling in i2c over aux
drm/radeon/atom: rework encoder enable/disable sequence
drm/radeon/dp: move sink power control to a separate function
drm/radeon/dp: use i2c_get_adapdata rather than casting
Ben Skeggs [Sun, 23 Feb 2014 13:30:11 +0000 (23:30 +1000)]
drm/nve0/fifo: attempt to recover engines from mmu faults
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 13 Jan 2014 23:38:50 +0000 (09:38 +1000)]
drm/nve0/fifo: allow copy engine channel to be looked up by instance
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:27:25 +0000 (23:27 +1000)]
drm/nve0/fifo: use runlist event instead of polling
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:24:25 +0000 (23:24 +1000)]
drm/nve0/fifo: allow channels to be marked as unrunnable
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:20:46 +0000 (23:20 +1000)]
drm/nve0/fifo: single printk for sched error data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:19:45 +0000 (23:19 +1000)]
drm/nve0/fifo: single printk for mmu fault data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:15:22 +0000 (23:15 +1000)]
drm/nve0/fifo: ack pb intr individually after handling each unit
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:12:37 +0000 (23:12 +1000)]
drm/nve0/fifo: runlist intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:08:00 +0000 (23:08 +1000)]
drm/nve0/fifo: engine intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 23 Feb 2014 13:06:22 +0000 (23:06 +1000)]
drm/nve0/fifo: mask unhandled intr bits when seen, rather than all intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 22 Feb 2014 02:44:23 +0000 (12:44 +1000)]
drm/nvc0/fifo: attempt to recover from engine ctxsw timeouts
My test cases don't seem to trigger this on all Fermi boards, not sure
if they're broken tests or it didn't work until later versions.
GF119 definitely works.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 5 Feb 2014 01:18:38 +0000 (11:18 +1000)]
drm/nvc0/fifo: attempt to recover engines from mmu faults
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 15:29:26 +0000 (01:29 +1000)]
drm/nvc0/fifo: use subdev identifiers for bar/ifb fault recovery cases
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 15:05:01 +0000 (01:05 +1000)]
drm/nvc0/fifo: use runlist event instead of polling
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 14:52:45 +0000 (00:52 +1000)]
drm/nvc0/fifo: allow channels to be marked as unrunnable
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 15:18:46 +0000 (01:18 +1000)]
drm/nvc0/fifo: sched intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 14:39:36 +0000 (00:39 +1000)]
drm/nvc0/fifo: single printk for mmu fault data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 14:31:29 +0000 (00:31 +1000)]
drm/nvc0/fifo: ack pb intr individually after handling each unit
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 14:28:47 +0000 (00:28 +1000)]
drm/nvc0/fifo: runlist intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 14:18:17 +0000 (00:18 +1000)]
drm/nvc0/fifo: engine intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 14:19:19 +0000 (00:19 +1000)]
drm/nvc0/fifo: mask unhandled intr bits when seen, rather than all intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 28 Jan 2014 01:47:46 +0000 (11:47 +1000)]
drm/nvc0/fifo: rename a couple of units
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 06:01:40 +0000 (16:01 +1000)]
drm/nvd0/disp: add debugging to show which supervisor actions are taken
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 20 Feb 2014 13:26:18 +0000 (23:26 +1000)]
drm/nv50-/disp: dump channel state when update method fails
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 20 Feb 2014 13:19:58 +0000 (23:19 +1000)]
drm/nv50-/disp: allow dumping core channel state at first supervisor intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 20 Feb 2014 05:14:10 +0000 (15:14 +1000)]
drm/nv50-/disp: add method descriptions for debugging
Lists of known methods for the DMA channel classes, and mappings to
their priv register addresses (where known).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 21 Feb 2014 01:06:40 +0000 (11:06 +1000)]
drm/nv50/disp: decode the known error codes to human readable form
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 20 Feb 2014 11:33:34 +0000 (21:33 +1000)]
drm/nv50/disp: preparation for storing static class data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 5 Feb 2014 01:18:38 +0000 (11:18 +1000)]
drm/nouveau/core: extend width of engine mask for namedb
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Sun, 16 Feb 2014 08:53:55 +0000 (03:53 -0500)]
drm/nouveau/bios: fix INDEX_ADDRESS_LATCHED trace printout
Having a \n in the middle of a format string means that the next line
doesn't get the prefixes unlike every other line printed by the trace.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Fri, 14 Feb 2014 19:28:36 +0000 (14:28 -0500)]
drm/nv50/gr: decode texture trap status code
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Fri, 14 Feb 2014 02:35:14 +0000 (21:35 -0500)]
drm/nouveau: use nv_debug for NV_DEBUG, make DRM a separate subflag
It's really confusing for NV_DEBUG's printing to be controlled via
drm.debug while everything else is controlled via nouveau.debug. These
messages can be turned on with nouveau.debug=DRM=debug.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Thu, 13 Feb 2014 08:39:50 +0000 (03:39 -0500)]
drm/nouveau: make hdmi device finding failure prints debug level
The hdmi device is required for runtime pm. However it is not available
on many esp older devices, which were all seeing these error messages.
Take this opportunity to also convert to nv_debug instead of the DRM_*
messages, like the rest of nouveau does.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Mon, 10 Feb 2014 05:57:01 +0000 (14:57 +0900)]
drm/nve0/fifo: allocate usermem as needed
Memory was always allocated for 4096 channels. Change this to allocate
what we actually need according to the number of channels we use.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 12 Feb 2014 05:00:59 +0000 (14:00 +0900)]
drm/nouveau: handle -EACCES runtime PM return code
pm_runtime_get*() may return -EACCES to indicate a device does not have
runtime PM enabled. This is currently the case with platform devices
on Nouveau, and is not an error in that context. Handle this case
without failure.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Sun, 9 Feb 2014 20:51:25 +0000 (15:51 -0500)]
drm/nouveau/abi16: fix handles past the 32nd one
abi16->handles is a u64, so make sure to use 1ULL << val when modifying.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Sun, 9 Feb 2014 20:51:24 +0000 (15:51 -0500)]
drm/nouveau: replace ffsll with __ffs64
The ffsll function is a lot slower than the __ffs64 built-in which
compiles to a single instruction on 64-bit. It's also nice to avoid
custom versions of standard functions. Note that __ffs == ffs - 1.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Jingoo Han [Wed, 5 Feb 2014 02:02:59 +0000 (11:02 +0900)]
drm/nouveau/hwmon: replace strict_strtol() with kstrtol()
The usage of strict_strtol() is not preferred, because
strict_strtol() is obsolete. Thus, kstrtol() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dan Carpenter [Thu, 6 Feb 2014 09:29:43 +0000 (12:29 +0300)]
drm/nouveau/hwmon: remove some redundant checks
No need to check "ret" twice in a row.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Wed, 5 Feb 2014 01:38:17 +0000 (20:38 -0500)]
drm/nv50/graph: update status enum names
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marek Olšák [Sat, 22 Mar 2014 15:20:43 +0000 (16:20 +0100)]
drm/radeon: set PIPE_CONFIG for 1D and linear tiling modes on CIK
This fixes fast color clear with 1D-tiled single-sample surfaces
and Hyper-Z corruption with 1D-tiled depth surfaces.
Even though it seems it is not needed for 1D tiling, CMASK and HTILE are
always 2D-tiled, thus the hw needs to know the actual pipe configuration
for CMASK and HTILE addressing no matter what the tiling mode of the surface
is.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Alex Deucher [Fri, 21 Mar 2014 14:34:08 +0000 (10:34 -0400)]
drm/radeon: use drm_dp_dpcd_read_link_status()
Replace the radeon specific version with the generic version.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Alex Deucher [Fri, 21 Mar 2014 14:34:07 +0000 (10:34 -0400)]
drm/radeon: use the new drm helpers for dp aux
Switch to the new dp helpers. The main difference is
that the DP helpers don't allow an adjustable delay in
the aux transaction, but I don't know that this is
necessary.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
projects / openwrt / staging / blogic.git / log