Christian Marangi [Sat, 18 Jun 2022 02:05:08 +0000 (04:05 +0200)]
ipq806x: 5.15: rework nand_pins for wg2600hp3 dts
nand_pins definition is now shipped in ipq8064 dtsi. Rework the
nand_pins definition for wg2600hp3 5.15 files.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:32:35 +0000 (22:32 +0200)]
ipq806x: 5.15: add boot-partitions binding to fix block warning
The patch has changed implementation and now the binding has changed.
Replace the old binding with boot-partitions and reimplement the
definition with the new definition.
The new definition is:
<offset1 size1 offset2 size2 offset3 ...>
and now supports sparsed patch.
Also add missing binding in some dts and add the backup boot partition
to the boot-partitions list.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:20:30 +0000 (22:20 +0200)]
ipq806x: 5.15: remove useless spm patch
Remove useless spm patch as using the normal qcom,spm compatible is
enough to register it with no clks.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:19:44 +0000 (22:19 +0200)]
ipq806x: 5.15: replace nandc patch with upstream version
Replace nandc fix patch with upstream version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:18:49 +0000 (22:18 +0200)]
ipq806x: 5.15: replace fab scaling patch with devfreq driver
Replace fab scaling patch with devfreq driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:17:19 +0000 (22:17 +0200)]
ipq806x: 5.15: add new version of cache cpu scaling driver
Use a new implementation by using a devfreq driver to scale the shared
cache of the krait cpu cores.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:16:04 +0000 (22:16 +0200)]
ipq806x: 5.15: backport devfreq new cpufreq based PASSIVE governor
Backport devfreq new cpufreq based PASSIVE governor needed for devfreq
based fab and cache scaling.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:15:13 +0000 (22:15 +0200)]
ipq806x: 5.15: replace stmmac pcs fix with upstream version
Replace stmmac pcs fix with upstream version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:14:23 +0000 (22:14 +0200)]
ipq806x: 5.15: replace gcc fixes with upstream version
Replace gcc patch fixes with upstream version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:13:02 +0000 (22:13 +0200)]
ipq806x: 5.15: replace lcc patch with upstream version
Replace lcc patch with proposed upstream version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:12:01 +0000 (22:12 +0200)]
ipq806x: 5.15: replace dtsi patches with upstream version
Reorganize dtsi patches with upstream version and drop dtsi in 5.15
files.
Also add an additional upstream patch for hwspinlock support.
Refresh all the dts with needed changes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:08:39 +0000 (22:08 +0200)]
ipq806x: 5.15: remove PCI_DOMAINS patch not needed anymore
This doesn't cause any panic anymore and no regression are observed with
ath10k. Remove this additional patch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:07:47 +0000 (22:07 +0200)]
ipq806x: 5.15: remove qcom adm Documentation patch
Remove qcom adm Documentation patch that is not needed for the target.
Probably a leftover when the adm bus was added, now merged upstream.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 16 Jun 2022 20:01:39 +0000 (22:01 +0200)]
ipq806x: split files dir to 5.10 and 5.15
In preparation for a cleanup of 5.15 patches copy the files dir to 5.10
and 5.15 kernel version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sat, 8 Oct 2022 17:25:54 +0000 (19:25 +0200)]
CI: kernel: generate ccache cache on kernel push
To actually use ccache cache on kernel test from pr, the kernel workflow
has to be run first from a push action.
This will permit as a side effect to test merged commits and catch commit
that may cause regression in kernel compilation even outside the github
system.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Chukun Pan [Mon, 3 Oct 2022 15:26:19 +0000 (23:26 +0800)]
uboot-mediatek: fixes defconfig typo for UniFi 6 LR
CONFIG_CMD_MTDPART does not exist, fix it.
Fixes: e9ad412 ("uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LR")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Sun, 2 Oct 2022 15:16:08 +0000 (23:16 +0800)]
uboot-mediatek: fixes defconfig typo for Linksys E8450
CONFIG_CMD_MTDPART does not exist, fix it.
Fixes: ed50004 ("uboot-mediatek: add support for Linksys E8450")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Martin Blumenstingl [Mon, 10 Oct 2022 15:48:49 +0000 (17:48 +0200)]
lantiq: dts: vr9: Add missing properties to the CPU port on the switch
The CPU port should define the phy-mode and and a PHY phandle or
fixed-link to indicate how the CPU port is connected to the SoC's
Ethernet controller. On xRX200 this is all internal connection, so use
phy-mode = "internal" along with a fixed-link that matches the
definition inside ð0.
Linux 6.0 shows a warning since upstream commit
e09e9873152e3f ("net:
dsa: make phylink-related OF properties mandatory on DSA and CPU
ports"). when these properties are missing. Adding the properties
before OpenWrt is updated to Linux 6.0 is harmless.
Suggested-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Chukun Pan [Mon, 26 Sep 2022 15:09:28 +0000 (23:09 +0800)]
libnl-tiny: update to the latest version
c42d890 build static library
28c44ca genl_family: explicitly null terminate
strncpy destination buffer
This fixes the compilation with gcc 12.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Du Cai [Fri, 7 Oct 2022 15:08:56 +0000 (23:08 +0800)]
ramips: use lzma-loader on JCG Q20
Fixes the LZMA uncompression issue on JCG Q20.
Signed-off-by: Du Cai <caidu@smail.nju.edu.cn>
INAGAKI Hiroshi [Wed, 5 Oct 2022 14:35:21 +0000 (23:35 +0900)]
ipq40xx: convert to DSA and enable Sony NCP-HG100/Cellular
This patch converts networking on Sony NCP-HG100/Cellular to DSA and
re-enables support for the device.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Dirk Buchwalder [Thu, 6 Oct 2022 16:25:12 +0000 (18:25 +0200)]
ipq40xx: ZTE MF289F: convert to DSA
Convert ZTE MF289F device to DSA, re-order network ports to match the
labels on the case and re-enable the device.
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@gmail.com>
John Audia [Wed, 5 Oct 2022 10:04:11 +0000 (06:04 -0400)]
kernel: bump 5.15 to 5.15.72
Removed upstreamed:
generic/pending-5.15/722-net-mt7531-only-do-PLL-once-after-the-reset.patch[1]
bcm53xx/patches-5.15/082-v6.0-clk-iproc-Do-not-rely-on-node-name-for-correct-PLL-s.patch[2]
All other patches automatically rebased
Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200, mvebu/cortexa72
Run-tested: bcm2711/RPi4B, mt7622/RT3200, mvebu/cortexa72 (RB5009UG+S+IN)
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.72&id=
5de02ab84aeca765da0e4d8e999af35325ac67c2
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.72&id=
ab5c5787ab5ecdc4a7ea20b4ef542579e1beb49d
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 5 Oct 2022 11:58:32 +0000 (07:58 -0400)]
kernel: bump 5.10 to 5.10.147
Removed upstreamed:
bcm53xx/patches-5.10/083-v6.0-clk-iproc-Do-not-rely-on-node-name-for-correct-PLL-s.patch[1]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.147&id=
a8e6cde5062fb2aff81f86cc0770591714bee545
Signed-off-by: John Audia <therealgraysky@proton.me>
Lech Perczak [Tue, 10 Aug 2021 19:37:17 +0000 (21:37 +0200)]
odhcp6c: respect 'delegate' option for 464XLAT sub-interface
dhcpv6.script contained support for disabling prefix delegation of 464XLAT
sub-interface, but netifd protocol handler was missing the required
export to disable this. Add missing export, akin to DS-Lite and MAP.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
Daniel Golle [Sun, 9 Oct 2022 15:34:35 +0000 (16:34 +0100)]
mediatek: filogic: set correct PWM clock and clean thermal zone
* set correct clocks for PWM to work.
* MT7986 PWM does have the 26MHz-clock-select, set that in patch
* drop useless 'passive' trip point in thermal zone
* extend pwm-fan to have 3 active operating points
* set reasonable trip points in thermal zone
* invert pwm-fan operating points and set shorter period to allow
less noisy operation of the PWM fan of the BPi-R3.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
INAGAKI Hiroshi [Sat, 17 Sep 2022 04:30:05 +0000 (13:30 +0900)]
realtek: cleanup rtl83{8x,9x}_enable_learning/flood
In *_enable_learning() only address learning should be configured, so
remove enabling forwarding. Forwarding is configured by the respective
*_enable_flood() functions.
Clean up both functions for RTL838x and RTL839x, and fix the comment on
the number of entries.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[squash RTL838x, RTL839x changes]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
INAGAKI Hiroshi [Sun, 10 Apr 2022 07:45:57 +0000 (16:45 +0900)]
realtek: swap *_phylink_mac_link_down() contents
Fix the (accidentally?) swapped contents of
rtl83xx_phylink_mac_link_down() and rtl93xx_phylink_mac_link_down().
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[amend commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
INAGAKI Hiroshi [Mon, 4 Apr 2022 12:57:43 +0000 (21:57 +0900)]
realtek: fix place of fdb/mdb info messages
Those messages should be printed when entry was found (idx >= 0). Move
them to the right place to not print invalid entry indices.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[amden commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
INAGAKI Hiroshi [Wed, 30 Mar 2022 03:04:23 +0000 (12:04 +0900)]
realtek: add missing of.h include in phy driver
of.h is required for of_property_read_u32().
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[amend commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
INAGAKI Hiroshi [Wed, 30 Mar 2022 03:00:42 +0000 (12:00 +0900)]
realtek: fix use of uninitialized sds_mode
The initial state of sds_mode in rtl9300_force_sds_mode() is null and it
will be configured in switch-case. So print message after it.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[amend commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
INAGAKI Hiroshi [Sun, 7 Aug 2022 05:43:35 +0000 (14:43 +0900)]
realtek: use MIPS fw_init_cmdline()
Use the generic function of MIPS in Linux Kernel instead of open coding
our own initialisation.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[amend commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
INAGAKI Hiroshi [Sun, 7 Aug 2022 06:12:46 +0000 (15:12 +0900)]
realtek: update SMP-related calls in prom_init()
The availabibity of probing CPC depends on CONFIG_MIPS_CPC symbol and it
will be checked in arch/mips/include/asm/mips-cpc.h. RTL9310 selects
this symbol, so the family check is redudant.
Furthermore, mips_cm_probe() is already called from setup_arch() in
mips/kernel/setup.c before prom_init(), and as such is not required.
Also move mips_cpc_probe() to run just before registering SMP ops.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[squash SMP change commits, reword commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
---
This patch only really has an impact on the rtl931x subtarget, which has
no devices. Noboby is currently set up to test these patches either, but
the end result is closer to MIPS_GENERIC, so I do not expect it to cause
issues.
INAGAKI Hiroshi [Tue, 29 Mar 2022 10:29:34 +0000 (19:29 +0900)]
realtek: separate lock of RTL8231 from phy driver
RTL8231 and ethernet phys are not on the same bus, so separate the lock
to each own to cut off the unnecessary dependency.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Tom Herbers [Fri, 7 Oct 2022 22:08:52 +0000 (00:08 +0200)]
ath79: fix model name of Extreme Networks WS-AP3805i
Everywhere else the device is referred to as WS-AP3805i,
only the model name wrongly only said AP3805i.
Signed-off-by: Tom Herbers <mail@tomherbers.de>
Daniel Golle [Thu, 6 Oct 2022 13:28:07 +0000 (14:28 +0100)]
mediatek: filogic: enable thermal, I2C and PWM of the BPi-R3
Setup thermal zone, select pins and enabled drivers for I2C (on 26-pin
GPIO bank) and PWM (1x fan and 1x GPIO bank).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 5 Oct 2022 17:44:42 +0000 (18:44 +0100)]
mediatek: filogic: add support for hw i2c, pwm and thermal
Add support for hardware I2C and PWM units found in the Filogic SoCs
as well as the CPU thermal support.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 7 Oct 2022 15:29:05 +0000 (16:29 +0100)]
kernel: refresh backport-5.15 patches
Refresh patches, removing unwanted git metadata from some backported
commits.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Fri, 7 Oct 2022 12:58:41 +0000 (14:58 +0200)]
mac80211: sync rx STP fix with updated version
Add back skb length check and fix a minor issue in protocol detection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 7 Oct 2022 09:29:54 +0000 (11:29 +0200)]
mac80211: fix issues with receiving small STP packets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Robert Meijer [Fri, 9 Oct 2020 17:58:46 +0000 (19:58 +0200)]
ath79: increase max tx ring buffer for ag71xx
This allows the user to specify a larger tx ring buffer size via ethtool.
Having symmetrical ring buffer sizes increases throughput on high bandwidth
(1 gbps tested) network connections.
The default value is not changed so the same behaviour is saved.
Signed-off-by: Robert Meijer <robert.s.meijer@gmail.com>
[ improve title, commit description and wrap to 80 columns ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Paul Spooren [Thu, 9 Sep 2021 08:57:46 +0000 (22:57 -1000)]
README: add download section
The *Firmware Selector* was built to simplify users finding suitable
images for their devices. Let's give it more visibility so unleashing
your home router becomes an easier thing.
As an alternative for more advanced user, provide the directl link to
the wiki download section.
Signed-off-by: Paul Spooren <mail@aparcar.org>
[ fix typo in commit description, add link to Wiki download page ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 4 Oct 2022 16:43:38 +0000 (18:43 +0200)]
CI: kernel: use ccache to speedup workflow
Use ccache to speedup kernel compilation.
Ccache dir is cached across each build test. To refresh ccache directory
we generate an hash of the kernel include files, that includes the
kernel versions of every kernel supported and the kernel compile
includes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 4 Oct 2022 16:38:57 +0000 (18:38 +0200)]
CI: tools: compile tools with ccache support for tools container
Enable ccache support for tools container, useful to speedup other
workflow even more.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tomasz Maciej Nowak [Mon, 3 Oct 2022 12:59:15 +0000 (14:59 +0200)]
ipq40xx: pakedge_wr-1: convert to DSA
Convert pakedge_wr-1 device to DSA and enable it.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>i
[ improve commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tomasz Maciej Nowak [Mon, 3 Oct 2022 12:58:53 +0000 (14:58 +0200)]
ipq40xx: luma_wrtq-329acn: convert to DSA
Convert luma_wrtq-329acn device to DSA and enable it.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
[ improve commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 3 Oct 2022 22:30:21 +0000 (00:30 +0200)]
rules.mk: move DOWNLOAD_CHECK_CERTIFICATE to include/download.mk
Move DOWNLOAD_CHECK_CERTIFICATE to include/download.mk as it's a better
place than exporting it in the global rules.mk makefile.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Cousens [Fri, 30 Sep 2022 00:13:46 +0000 (10:13 +1000)]
build: prefer HTTPS if available (for packages)
Changes PKG_SOURCE_URL's for arptables, bsdiff, dnsmasq,
fortify-headers, ipset, ipset-dns, libaudit, libpcap, libressl,
lua, lua5.3, tcpdump and valgrind, to HTTPS
Signed-off-by: Daniel Cousens <github@dcousens.com>
Stijn Tintel [Wed, 5 Oct 2022 11:05:55 +0000 (14:05 +0300)]
qoriq: fix typo in FEATURES
There is no root-part FEATURE.
Reported-by: Karl Palsson <karlp@etactica.com>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Rafał Miłecki [Tue, 4 Oct 2022 10:04:37 +0000 (12:04 +0200)]
kernel: fix possible mtd NULL pointer dereference
Fixes: 1a9ee367343ed ("kernel: backport mtd dynamic partition patch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Koen Vandeputte [Tue, 4 Oct 2022 08:48:18 +0000 (10:48 +0200)]
mac80211: fix compile error when mesh is disabled
This fixes following compile error seen when
building mac80211 with mesh disabled:
.../backports-5.15.58-1/net/mac80211/agg-rx.c: In function 'ieee80211_send_addba_resp':
...backports-5.15.58-1/net/mac80211/agg-rx.c:255:17: error: 'struct sta_info' has no member named 'mesh'
255 | if (!sta->mesh)
| ^~
sta_info.h shows this item as being optional based on flags:
struct mesh_sta *mesh;
Guard the check to fix this.
Fixes: f96744ba6b ("mac80211: mask nested A-MSDU support for mesh")
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Edward Chow [Mon, 3 Oct 2022 11:39:58 +0000 (19:39 +0800)]
CI: Add workaround for github uppercase usernames
The workflow defined in tools.yml and kernel.yml used to fail on
forked repositories of contributers whose github username contains
uppercase letters.
A workaround mentioned in
https://github.com/orgs/community/discussions/27086 and
https://stackoverflow.com/questions/
70326569/ is applied.
Signed-off-by: Edward Chow <equu@openmail.cc>
Petr Štetiar [Thu, 29 Sep 2022 16:45:40 +0000 (18:45 +0200)]
treewide: fix security issues by bumping all packages using libwolfssl
As wolfSSL is having hard time maintaining ABI compatibility between
releases, we need to manually force rebuild of packages depending on
libwolfssl and thus force their upgrade. Otherwise due to the ABI
handling we would endup with possibly two libwolfssl libraries in the
system, including the patched libwolfssl-5.5.1, but still have
vulnerable services running using the vulnerable libwolfssl-5.4.0.
So in order to propagate update of libwolfssl to latest stable release
done in commit
ec8fb542ec3e4 ("wolfssl: fix TLSv1.3 RCE in uhttpd by
using 5.5.1-stable (CVE-2022-39173)") which fixes several remotely
exploitable vulnerabilities, we need to bump PKG_RELEASE of all
packages using wolfSSL library.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Matthias Schiffer [Mon, 3 Oct 2022 11:23:41 +0000 (13:23 +0200)]
ramips: fix switch setup for ASUS RT-AX53U
The device has only 1 WAN + 3 LAN ports. Remove "lan4" interface
corresponding to the non-existing port.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Petr Štetiar [Fri, 12 Aug 2022 11:51:40 +0000 (13:51 +0200)]
ipq40xx: glinet-b1300: fix LAN and WAN MAC address assigments
When testing the DSA changes with 5.15.60 kernel, I've noticed, that the
MAC addresses are not properly configured, there is single MAC being
used for LAN and WAN interfaces:
eth0: 94:83:c4:XX:YY:4a (MAC on sticker)
lan1@eth0: 94:83:c4:XX:YY:4a
lan2@eth0: 94:83:c4:XX:YY:4a
wan@eth0: 94:83:c4:XX:YY:4a
wlan0: 94:83:c4:XX:YY:4a
wlan1: 94:83:c4:XX:YY:4b
The same config, prior to the DSA conversion:
lan/eth0: 94:83:c4:XX:YY:4a (MAC on sticker)
wan/eth1: 94:83:c4:XX:YY:4b
wlan0: 94:83:c4:XX:YY:4a
wlan1: 94:83:c4:XX:YY:4b
Settings in ART partition:
root@OpenWrt:/# hexdump -C /dev/mtd7 | grep '94 83'
00000000 94 83 c4 XX YY 4a 94 83 c4 0e YY 4b ff ff ff ff |.....J.....K....|
00001000 20 2f 8d 8c 01 01 94 83 c4 XX YY 4a 00 00 20 00 | /.........J.. .|
00005000 20 2f 5a 3a 01 01 94 83 c4 XX YY 4b 00 00 20 00 | /Z:.......K.. .|
So let's fix it by keeping same MAC address assigment as was done before
DSA conversion and while at it, define `label-mac-device` as well.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Tomas Lara [Sun, 26 Jun 2022 02:28:42 +0000 (22:28 -0400)]
rockchip: switch to 5.15 kernel
Run tested: NanoPI R4S
Signed-off-by: Tomas Lara <tl849670@gmail.com>
Tomas Lara [Sun, 26 Jun 2022 02:13:25 +0000 (22:13 -0400)]
kernel: add missing config symbols for 5.15
Add missing symbols, needed when rockchip kernel 5.15 is compile with ALL_KMODS=y
Signed-off-by: Tomas Lara <tl849670@gmail.com>
Tomas Lara [Sun, 26 Jun 2022 01:48:38 +0000 (21:48 -0400)]
rockchip: refresh kernel 5.15 config
Refreshed using make kernel oldconfig CONFIG TARGET=rockchip .
Signed-off-by: Tomas Lara <tl849670@gmail.com>
David Bauer [Wed, 28 Sep 2022 15:42:48 +0000 (17:42 +0200)]
ipq40xx: disable boards not converted to DSA
Signed-off-by: David Bauer <mail@david-bauer.net>
Robert Marko [Wed, 7 Sep 2022 10:06:47 +0000 (12:06 +0200)]
ipq40xx: remove non-converted network configs
Remove networking configs for non DSA converted boards in ipq40xx.
Currently, they are just causing clutter.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 27 Jun 2022 12:40:43 +0000 (14:40 +0200)]
ipq40xx: ipqess: enable threaded NAPI
Enable threaded NAPI by default in IPQESS driver as it significantly
improves network perfromance, in my testing about 100+ Mbps in WAN-LAN
routing.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Lech Perczak [Wed, 15 Dec 2021 20:10:11 +0000 (21:10 +0100)]
ipq40xx: Meraki MR33: convert MAC addresses to nvmem
This fixes assigning random MAC to br-lan interface upon boot.
While at that, rename at24@50 node to eeprom@50, to align with upstream
device tree style.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Robert Marko [Tue, 14 Dec 2021 00:00:00 +0000 (01:00 +0100)]
ipq40xx: convert some boards to DSA
Convert IPQ40xx boards to DSA setup.
Signed-off-by: Leon M. George <leon@georgemail.eu>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Signed-off-by: ChunAm See <z1250747241@gmail.com>
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Serhii Serhieiev [Mon, 25 Apr 2022 13:09:43 +0000 (15:09 +0200)]
ipq40xx: qca8k: introduce proper PSGMII calibration
Serhii and others have experienced PSGMII link degradation up to point
that it actually does not pass packets at all or packets arrive as zeros.
This usually happened after a couple of hot reboots.
Serhii has managed to track it down to PSGMII calibration not being done
properly and has fixed it, so all of the code is Serhii-s work.
Signed-off-by: Serhii Serhieiev <adron@mstnt.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Sun, 20 Mar 2022 18:34:18 +0000 (19:34 +0100)]
ipq40xx: qca807x: drop kernel version checks
Since kernel 5.4 has been droppped from IPQ40xx, there is no need to keep
the version checks for kernels older than 5.10.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Serhii Serhieiev [Sun, 20 Mar 2022 18:26:32 +0000 (19:26 +0100)]
ipq40xx: qca807x: add suspend and resume ops
Currently, suspend and resume ops are not present, this means that if user
disables a DSA interface that the PHY-s remain alive and the link is up.
Fix it by using generic PHY suspend and resume ops.
Signed-off-by: Serhii Serhieiev <adron@mstnt.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 27 Dec 2021 14:20:58 +0000 (15:20 +0100)]
ipq40xx: sxtsq-5-ac: correct TCSR ESS type
SXTsq 5 ac uses RGMII on the port 5 and not PSGMII, so correct the TCSR
interface type property.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 1 Nov 2021 17:30:00 +0000 (18:30 +0100)]
ipq40xx: enable ethernet and DSA driver combo
Select the Ethernet driver, DSA tag driver and the DSA driver itself to
be built in the kernel config.
They automatically pull in switchdev and phylink.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 27 Dec 2021 14:11:18 +0000 (15:11 +0100)]
ipq40xx: add DSA switch driver
Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in.
It shares most of the stuff with its external counterpart, however it is
modified for the SoC.
Namely, it doesn't have second CPU port (Port 6), so it has 6 ports
instead of 7.
It also has no built-in PHY-s but rather requires external PSGMII based
companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry
out calibration before using them.
PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which
unfortunately requires some magic values as the datasheet doesnt document
the bits that are being set or the register at all.
Since its built-in it is MMIO like other peripherals and doesn't have its
own MDIO bus but depends on the SoC provided one.
CPU connection is at Port 0 and it uses some kind of a internal connection
and no traditional RGMII/SGMII.
It also doesn't use in-band tagging like other qca8k switches so a shinfo
based tagger is used.
This is based on the current OpenWrt qca8k version that has been imported
from generic target.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 1 Nov 2021 17:59:46 +0000 (18:59 +0100)]
ipq40xx: import qca8k from generic
This is just importing the qca8k driver from the generic target.
It will be used as the based for IPQ40xx version, this is just
to be able to see the diff.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 1 Nov 2021 12:02:53 +0000 (13:02 +0100)]
ipq40xx: add PSGMII PHY mode define
PSGMII is a Qualcomm specific mode similar to QSGMII but it has 5 SGMII
lines instead of 4 in QSGMII.
This just adds the support for the PHY layer to be able to identify the
mode for further use.
It is required for the DSA driver.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Wed, 15 Dec 2021 20:09:38 +0000 (21:09 +0100)]
ipq40xx: add IPQESS ethernet driver
IPQESS is the EDMA replacement driver for the IPQ40xx SoC built-in
ethernet controller.
Unlike EDMA it is Phylink based and doesnt touch PHY-s directly.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 8 Nov 2021 22:06:02 +0000 (23:06 +0100)]
ipq40xx: qca807x: always set PSGMII AZ WAR
There is no point in using a DT property to trigger setting the PSGMII
PHY AZ transmitting ability.
Especially since EEE can be disabled using ethtool anyway.
Fixup the mask for setting the workaround as only BIT(0) is actually being
changed and use the phy_clear_bits_mmd helper instead of reading, then
clearing the bit and writing back as it does everything for us.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 1 Nov 2021 11:32:34 +0000 (12:32 +0100)]
ipq40xx: add shinfo based DSA tag driver
IPQ40xx requires a special DSA tag driver despite using the QCA8337N
switch.
However they have changed the header format and the existing QCA tag
driver cannot be reused.
For details on how it actually works and else read the patch commit
description.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Wed, 8 Dec 2021 13:44:05 +0000 (14:44 +0100)]
ipq40xx: disable nodes instead of deleting them
There is no reason to delete the DT PHY nodes
as you can just disable them.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 25 Oct 2021 16:30:00 +0000 (18:30 +0200)]
ipq40xx: qca807x: add SFP improvements
Currently, QCA807x doesnt do any kind of validation to see whether it
actually supports the inserted module.
So lets add checks to allow only 1000BaseX and 100BaseFX based modules.
While adding validation, move fiber configuration to insert/remove events
instead of always doing it at config time.
This allows getting rid of the DT property for fiber enable and now only
the upstream sfp phandle is required.
Since we are refactoring fiber related code, lets heavily simplify the
status polling as the current logic is overcomplicated due to previous
wish to support non standard SFP cages that dont have pins properly
connected, that is removed now and only proper SFP cages will work.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Sat, 19 Feb 2022 12:48:36 +0000 (13:48 +0100)]
ipq40xx: drop ESSEDMA + AR40xx DTS nodes
In order to start working on IPQESS + DSA drop
the old ESSEDMA + AR40xx DTS nodes.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 25 Oct 2021 16:33:32 +0000 (18:33 +0200)]
ipq40xx: drop ESSEDMA + AR40xx
In order to start working on IPQESS + DSA drop the old ESSEDMA + AR40xx
driver combo.
Remove the kernel symbols, disable swconfig and drop swconfig package
as they are not needed anymore.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
David Bauer [Thu, 7 Oct 2021 22:30:23 +0000 (00:30 +0200)]
mac80211: mask nested A-MSDU support for mesh
mac80211 incorrectly processes A-MSDUs contained in A-MPDU frames. This
results in dropped packets and severely impacted throughput.
As a workaround, don't indicate support for A-MSDUs contained in
A-MPDUs. This improves throughput over mesh links by factor 10.
Ref: https://github.com/openwrt/mt76/issues/450
Signed-off-by: David Bauer <mail@david-bauer.net>
Josef Schlehofer [Wed, 14 Sep 2022 13:23:45 +0000 (15:23 +0200)]
uboot-mvebu: backport LibreSSL patches for older version of LibreSSL
If you would like to compile the newest version of U-boot together with the stable
OpenWrt version, which does not have LibreSSL >= 3.5, which was updated
in the master branch by commit
5451b03b7ceb2315445c683fe174e28bbdd49c2f
("tools/libressl: bump to v3.5.3"), then you need these two patches to
fix it. They are backported from U-boot repository.
This should be backported to stable OpenWrt versions.
Reported-by: Michal Vasilek <michal.vasilek@nic.cz>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Josef Schlehofer [Wed, 14 Sep 2022 13:19:56 +0000 (15:19 +0200)]
uboot-mvebu: backport patch to fix compilation on non glibc system
This issue was reported by @paper42, who is using Void Linux with musl
to compile OpenWrt and its packages and found out it is not possible to
compile U-boot for Turris Omnia (neither any other).
It fixes following output:
```
HOSTCC tools/kwboot
tools/kwboot.c: In function 'kwboot_tty_change_baudrate':
tools/kwboot.c:662:6: error: 'struct termios' has no member named 'c_ospeed'
662 | tio.c_ospeed = tio.c_ispeed = baudrate;
| ^
tools/kwboot.c:662:21: error: 'struct termios' has no member named 'c_ispeed'
662 | tio.c_ospeed = tio.c_ispeed = baudrate;
| ^
tools/kwboot.c:690:31: error: 'struct termios' has no member named 'c_ospeed'
690 | if (!_is_within_tolerance(tio.c_ospeed, baudrate, 3))
| ^
tools/kwboot.c:693:31: error: 'struct termios' has no member named 'c_ispeed'
693 | if (!_is_within_tolerance(tio.c_ispeed, baudrate, 3))
|
```
Tested-by: Michal Vasilek <michal.vasilek@nic.cz>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Nick Hainke [Sun, 25 Sep 2022 09:12:31 +0000 (11:12 +0200)]
trace-cmd: update to v3.1.3
Remove upstremed patch:
- 100-tracecmd-add-NO_LIBZSTD-option-to-disable-libzstd.patch
Changes:
c65c02c trace-cmd: Version 3.1.3
14a7aca trace-cmd library: Add API for mapping between host and guests
9191b8e tracecmd extract: Allow using --compression.
d63ae35 trace-cmd report: Add callback for kvm plugin to show guest functions
0c7ef72 trace-cmd library: Add man pages for iterator functions
3cd1b55 trace-cmd library: Add tracecmd_follow_event()
27ea9e1 libtracecmd: Add documentation on tracecmd_set/get_private()
3c544ad libtracecmd: Add a man pages for handling of time stamps
5baf7a3 libtracecmd: Add check-manpages.sh
ee007a1 trace-cmd library: Make tracecmd_filter_match() local
cb04105 tracecmd library documentation: Use star and not underscore for function names
54931be trace-cmd: Do not return zero length name for guest by name
43ffa27 trace-cmd: Close socket descriptor on failed connection
4744ca3 trace-cmd record/agent: Add --notimeout option
e512b22 trace-cmd: Add compile time overrides for libraries
a6fe935 trace-cmd: README: Add note on installing libtracecmd
067f45f trace-cmd: libtracecmd: Fixing linking to C++ code
689a0d4 tracecmd: Add NO_LIBZSTD option to disable libzstd
6bbcd3e trace-cmd report: Use library tracecmd_filter_*() logic
955d05f trace-cmd report: Make filter arguments match their files
82ed4a9 trace-cmd library: Add filtering logic for iterating events
dbd8777 trace-cmd report: Use tracecmd_iterate_events_multi()
78a74b1 trace-cmd library: Allow callers to save private data in tracecmd_input handlers
b37903a tracecmd library: Add tracecmd_iterate_events_multi()
d83b662 tracecmd utest: Add test to test using the libraries to read
2cb6cc2 tracecmd library: Add tracecmd_iterate_events()
762839a tracecmd: Use make variable instead of if statement for zlib test
1504f3f trace-cmd: Document new proxy args for {agent,record}
9a1c5d7 trace-cmd record: Keep --proxy from being passed to agents
ef8a8d7 trace-cmd libs: Initialize msg to NULL tracecmd_msg_read_data()
39ec10a trace-cmd: Do not use instance from trace context
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 25 Sep 2022 09:10:15 +0000 (11:10 +0200)]
libtracefs: update to 1.5.0
Changes:
93f4d52 libtracefs: version 1.5
bc857db libtracefs: Add tracefs_u{ret}probe_alloc to generic man page
db55441 libtracefs: Add tracefs_debug_dir() to generic libtracefs man page
d2d5924 libtracefs: Add test instructions for openSUSE
4a7b475 libtracefs: Fix test suite typo
ee8c644 libtracefs: Add tracefs_tracer_available() helper
799d88e libtracefs: Add API to set custom tracing directory
1bb00d1 libtracefs: allow pthread inclusion overrideable in Makefile
04651d0 libtracefs sqlhist: Allow pointers to match longs
9de59a0 libtracefs: Remove double free attempt of new_event in tracefs_synth_echo_cmd()
0aaa86a libtracefs: Fix use after free in tracefs_synth_alloc()
d2d5340 libtracefs: Add missed_events to record
9aaa8b0 libtracefs: Set the number of CPUs in tracefs_local_events_system()
56a0ba0 libtracefs: Return negative number when tracefs_filter_string_append() fails
c5f849f libtracefs: Set the long size of the tep handle in tracefs_local_events_system()
5c8103e revert:
0de961e74f96 ("libtracefs: Set visibility of parser symbols as 'internal'")
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 25 Sep 2022 09:09:42 +0000 (11:09 +0200)]
libtraceevent: update to 1.6.3
Changes:
fda4ad9 libtraceevent: version 1.6.3
d02a61e libtraceevent: Add man pages for tep_plugin_kvm_get/put_func()
6643bf9 libtraceevent: Have kvm_exit/enter be able to show guest function
a596299 libtraceevent: Add tep_print_field() to check-manpages.sh deprecated
065c9cd libtraceevent: Add man page documentation of tep_get_sub_buffer_size()
6e18ecc libtraceevent: Add man page for tep_plugin_add_option()
6738713 libtraceevent: Add some missing functions to generic libtraceevent man page
deefe29 libtraceevent: Include meta data functions in libtraceevent man pages
cf6dd2d libtraceevent: Add tep_get_function_count() to libtraceevent man page
5bfc11e libtraceevent: Add printk documentation to libtraceevent man page
65c767b libtraceevent: Update man page to reflect tep_is_pid_registered() rename
7cd173f libtraceevent: Add check-manpages.sh
fd6efc9 libtraceevent: Documentation: Correct typo in example
5c375b0 libtraceevent: Fixing linking to C++ code
7839fc2 libtraceevent: Makefile - set LIBS as conditional assignment
c5493e7 libtraceevent: Remove double assignment of val in eval_num_arg()
efd3289 libtraceevent: Add warnings if fields are outside the event
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 25 Sep 2022 09:58:04 +0000 (11:58 +0200)]
popt: update to 1.19
Add patch to fix compilation:
- 100-configure.ac-remove-require-gettext-version.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 26 Sep 2022 18:23:21 +0000 (20:23 +0200)]
libcap: update to 2.66
4f96e67 Up the release version to 2.66
60ff008 Fix typos in the cap_from_text.3 man page.
281b6e4 Add captrace to .gitignore file
09a2c1d Add an example of using BPF kprobing to trace capability use.
26e3a09 Clean up getpcaps code.
fc804ac getpcaps: catch PID parsing errors.
fc437fd Fix an issue with bash displaying an error.
7db9589 Some more simplifications for building
27e801b Fix for "make clean ; make -j48 test"
Signed-off-by: Nick Hainke <vincent@systemli.org>
Aleksander Jan Bajkowski [Sat, 10 Sep 2022 18:13:58 +0000 (20:13 +0200)]
lantiq: enable interrupts on second VPEs
This patch is needed to handle interrupts by the second VPE on the Lantiq
ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to
the second VPE results in a hang. Currently, the vsmp_init_secondary()
function is responsible for enabling these interrupts. It only enables
Malta-specific interrupts (SW0, SW1, HW4 and HW5).
The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware
interrupts are wired to an ICU instance. Each VPE has an independent
instance of the ICU. The mapping of the ICU interrupts is shown below:
SW0(IP0) - IPI call,
SW1(IP1) - IPI resched,
HW0(IP2) - ICU 0-31,
HW1(IP3) - ICU 32-63,
HW2(IP4) - ICU 64-95,
HW3(IP5) - ICU 96-127,
HW4(IP6) - ICU 128-159,
HW5(IP7) - timer.
This patch enables all interrupt lines on the second VPE.
This problem affects multithreaded SoCs with a custom interrupt controller.
SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware
that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the
future, this may be replaced with some generic solution.
Tested on Lantiq xRX200.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Alexey Kosmakov [Mon, 30 May 2022 08:46:34 +0000 (13:46 +0500)]
ramips: add support for SNR SNR-CPE-ME2-Lite
SNR SNR-CPE-ME2-Lite is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : SPI-NOR 16 MiB
- WLAN : 2.4 GHz 2T2R (MediaTek MT7603E)
5 GHz 2T2R (MediaTek MT7613BE)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- UART : through-hole on PCB
- J4: 3.3V, GND, TX, RX
- 57600n8
- Power : 12 VDC, 1.5 A
Flash instruction via WEB (firmware 1.10.4 and later)
1. Boot SNR-CPE-ME2-Lite normally with "Router" mode
2. Access to "http://192.168.1.1/" and open "Administration -> Management" page
3. Select the OpenWrt factory image in "Firmware update" section and click "Update" button
4. Wait ~120 seconds to complete flashing
Flash instruction via TFTP (all version):
1. Boot SNR-CPE-ME2-Lite to recovery mode (hold the reset button while power on)
2. Send firmware via TFTP client:
TFTP Server address: 192.168.1.1
TFTP Client address: 192.168.1.131
3. Wait ~120 seconds to complete flashing
Signed-off-by: Alexey Kosmakov <a.kosmakov@nagtech.ru>
Mark King [Sun, 25 Sep 2022 20:53:52 +0000 (21:53 +0100)]
ramips: enable LZMA loader to fix Linksys RE6500 boot
At some point after 21.02.3 and before 22.03.0, the size limits of the
Linksys RE6500 were reached and prevent booting from the 22.03.0 release
or builds of current SNAPSHOT. This patch allows builds of master to boot
again and has been tested on my device.
Fixes: #8577
Signed-off-by: Mark King <mark@vemek.co>
John Audia [Wed, 28 Sep 2022 20:05:00 +0000 (16:05 -0400)]
kernel: bump 5.10 to 5.10.146
All patches automatically rebased.
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Fri, 23 Sep 2022 20:58:05 +0000 (16:58 -0400)]
kernel: bump 5.10 to 5.10.145
Manually rebased:
hack-5.10/780-usb-net-MeigLink_modem_support.patch
Removed upstreamed:
patches-5.10/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch[1]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.145&id=
24196210b198e8e39296e277bb93b362aa207775
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 28 Sep 2022 17:26:15 +0000 (13:26 -0400)]
kernel: bump 5.15 to 5.15.71
Removed upstreamed:
uml/patches-5.15/001-um-fix-default-console-kernel-parameter.patch[1]
All other patches automatically rebased
Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.71&id=
e1dbe8a62098b20f5093cf75ade2f2dc9259b006
Signed-off-by: John Audia <therealgraysky@proton.me>
Compile-tested: mvebu/cortexa72 (RB5009UG+S+IN)
Run-tested: mvebu/cortexa72 (RB5009UG+S+IN)
John Audia [Fri, 23 Sep 2022 19:27:54 +0000 (15:27 -0400)]
kernel: bump 5.15 to 5.15.70
Manually rebased:
hack-5.15/780-usb-net-MeigLink_modem_support.patch
Removed upstreamed:
patches-5.15/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch[1]
All other patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.70&id=
89cfddd416bac41ff35f37f928ed3d7fefef908e
Signed-off-by: John Audia <therealgraysky@proton.me>
Nick Hainke [Wed, 14 Sep 2022 13:04:13 +0000 (15:04 +0200)]
tools/cmake: update to 3.24.2
Release Notes:
https://www.kitware.com/cmake-3-24-2-is-available-for-download/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 2 Oct 2022 09:22:23 +0000 (11:22 +0200)]
tools/expat: switch to tar.xz to save bandwidth
The tar.xz download is a bit smaller. Use this download to save traffic.
Suggested-by: hardfalcon
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Fri, 30 Sep 2022 06:27:44 +0000 (08:27 +0200)]
tools/expat: update to 2.4.9
Fixes CVE-2022-40674.
Release Notes:
https://github.com/libexpat/libexpat/blob/R_2_4_9/expat/Changes
Signed-off-by: Nick Hainke <vincent@systemli.org>
Rosen Penev [Thu, 22 Sep 2022 22:41:28 +0000 (15:41 -0700)]
tools/meson: backport WSL2 fix
For some reason, Microsoft's Plan9 driver returns IOError on missing
file.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Santiago Piccinini [Fri, 30 Sep 2022 13:44:04 +0000 (10:44 -0300)]
ath79: fix LibreRouter-v1 watchdog and poe_pass
Watchdog and poe_passthrough gpios require the jtag disabled.
Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
Felix Fietkau [Sat, 1 Oct 2022 14:05:05 +0000 (16:05 +0200)]
mt76: update to the latest version
e4fa68a9b3b3 linux-firmware: update firmware for MT7921 WiFi device
60fcf08fe659 linux-firmware: update firmware for MT7921 WiFi device
9d601f4eee8f linux-firmware: update firmware for MT7922 WiFi device
e49b6063fb4b wifi: mt76: move mt76_rate_power from core to mt76x02 driver code
3f27f6adb1ab wifi: mt76: mt76x02: simplify struct mt76x02_rate_power
c07f3d2d5ede wifi: mt76: mt7921: fix antenna signal are way off in monitor mode
9059a5de3bd0 wifi: mt76: Remove unused inline function mt76_wcid_mask_test()
d75f15ddeb90 wifi: mt76: mt7915: fix bounds checking for tx-free-done command
06df7e689294 wifi: mt76: mt7915: reserve 8 bits for the index of rf registers
ad3d0f8db00b wifi: mt76: mt7915: rework eeprom tx paths and streams init
66065073177b wifi: mt76: mt7915: deal with special variant of mt7916
b0114a0abb57 wifi: mt76: mt7915: rework testmode tx antenna setting
6dee964e1f36 wifi: mt76: connac: introduce mt76_connac_spe_idx()
48c116d92939 wifi: mt76: mt7915: add spatial extension index support
db6db4ded0fd wifi: mt76: mt7915: set correct antenna for radar detection on MT7915D
2b8f56a72d76 wifi: mt76: mt7915: fix mt7915_mac_set_timing()
d554a02554db wifi: mt76: mt7915: move wed init routines in mmio.c
61ce40e65852 wifi: mt76: mt7915: enable wed for mt7986 chipset
584a96ec4a0f wifi: mt76: mt7915: enable wed for mt7986-wmac chipset
172d68b6253d mt76: mt76x02: fix vht rate power array overrun
72b87836d368 Revert "mt76: use IEEE80211_OFFLOAD_ENCAP_ENABLED instead of MT_DRV_AMSDU_OFFLOAD"
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sander Vanheule [Sat, 1 Oct 2022 07:55:01 +0000 (09:55 +0200)]
realtek: use correct CAUSEF_DC macro in prom.c
The workaround for an already-enabled R4K timer used a non-existent
macro CAUSE_DC. Fix compiling by using the actual macro CAUSEF_DC.
Fixes: b7aab1958591 ("realtek: SMP handling of R4K timer interrupts")
Signed-off-by: Sander Vanheule <sander@svanheule.net>