drm/rockchip: cdn-dp: add more log for video config

In order to analyze some video config failed, add some useful
printouts.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1488940077-22297-4-git-send-email-zyw@rock-chips.com

drm/rockchip: cdn-dp: Correct PHY register address

Correct some DP register address for PHY Configuration according to
latest datasheet.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1488940077-22297-3-git-send-email-zyw@rock-chips.com

drm/rockchip: cdn-dp: return error code when clk_get_rate failed

The clk_get_rate return 0 if something goes wrong, so it can never be
less then zero, the ret should be set a error code, otherwise the
cdn_dp_clk_enable will return 0 when it failed at clk_get_rate.
In addition, clk_get_rate() returns an "unsigned long", so use
"unsigned long" instead of "u32" is better.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1488940077-22297-2-git-send-email-zyw@rock-chips.com

Merge branch 'drm/next/platform' of git://linuxtv.org/pinchartl/media into drm-misc-next

Merge Laurent's drm_platform removal code. Only conflict is with the
drm_pci.h extraction, which allows me to fix up the misplayed
drm_platform_init fumble that 0day and Stephen Rothwell reported.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm: bridge: dw-hdmi: Move the driver to a separate directory.

The driver is already made of 5 separate source files. Move it to a
newly created directory named synopsys where more Synopsys bridge
drivers can be added later (for the DisplayPort controller for
instance).

Suggested-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-10-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Switch to regmap for register access

The Synopsys Designware HDMI TX Controller does not enforce register
access on platforms instanciating it. The current driver supports two
different types of memory-mapped flat register access, but in order to
support the Amlogic Meson SoCs integration, and provide a more generic
way to handle all sorts of register mapping, switch the register access
to use the regmap infrastructure.

In the case of registers that are not flat memory-mapped or do not
conform to the current driver implementation, a regmap struct can be
given in the plat_data and be used at probe or bind.

Since the AHB audio driver is only available with direct memory access,
only allow the I2S audio driver to be registered is directly
memory-mapped.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-10-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Remove device type from platform data

The device type isn't used anymore now that workarounds and PHY-specific
operations are performed based on version information read at runtime.
Remove it.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-9-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Add support for custom PHY configuration

The DWC HDMI TX controller interfaces with a companion PHY. While
Synopsys provides multiple standard PHYs, SoC vendors can also integrate
a custom PHY.

Modularize PHY configuration to support vendor PHYs through platform
data. The existing PHY configuration code was originally written to
support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC
MLP PHY. The HDMI 2.0 PHY will require a separate configuration
function.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-8-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Create PHY operations

The HDMI TX controller support different PHYs whose programming
interface can vary significantly, especially with vendor PHYs that are
not provided by Synopsys. To support them, create a PHY operation
structure that can be provided by the platform glue layer. The existing
PHY handling code (limited to Synopsys PHY support) is refactored into a
set of default PHY operations that are used automatically when the
platform glue doesn't provide its own operations.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170305233615.11993-1-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Fix the PHY power up sequence

When powering the PHY up we need to wait for the PLL to lock. This is
done by polling the TX_PHY_LOCK bit in the HDMI_PHY_STAT0 register
(interrupt-based wait could be implemented as well but is likely
overkill). The bit is asserted when the PLL locks, but the current code
incorrectly waits for the bit to be deasserted. Fix it, and while at it,
replace the udelay() with a sleep as the code never runs in
non-sleepable context.

To be consistent with the power down implementation move the poll loop
to the power off function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170305233557.11945-1-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Fix the PHY power down sequence

The PHY requires us to wait for the PHY to switch to low power mode
after deasserting TXPWRON and before asserting PDDQ in the power down
sequence, otherwise power down will fail.

The PHY power down can be monitored though the TX_READY bit, available
through I2C in the PHY registers, or the TX_PHY_LOCK bit, available
through the HDMI TX registers. As the two are equivalent, let's pick the
easier solution of polling the TX_PHY_LOCK bit.

The power down code is currently duplicated in multiple places. To avoid
spreading multiple calls to a TX_PHY_LOCK poll function, we have to
refactor the power down code and group it all in a single function.

Tests showed that one poll iteration was enough for TX_PHY_LOCK to
become low, without requiring any additional delay. Retrying the read
five times with a 1ms to 2ms delay between each attempt should thus be
more than enough.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170305233539.11898-1-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Enable CSC even for DVI

If the input pixel format is not RGB, the CSC must be enabled in order to
provide valid pixel to DVI sinks.
This patch removes the hdmi only dependency on the CSC enabling.

Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-4-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Move CSC configuration out of PHY code

The color space converter isn't part of the PHY, move its configuration
out of PHY code.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-3-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Remove unused functions

Most of the hdmi_phy_test_*() functions are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Tested-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-2-laurent.pinchart+renesas@ideasonboard.com

drm: Extract drm_file.h

I'm torn on whether drm_minor really should be here or somewhere else.
Maybe with more clarity after untangling drmP.h more this is easier to
decide, for now I've put a FIXME comment right next to it. Right now
we need struct drm_minor for the inline drm_file type helpers, and so
it does kinda make sense to have them here.

Next patch will kerneldoc-ify the entire pile.

Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-10-daniel.vetter@ffwll.ch

drm: Remove DRM_MINOR_CNT

This was originally added by David Herrmann for range checks, but
entirely unused. It confused me, so let's remove it.

Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-9-daniel.vetter@ffwll.ch

drm: rename drm_fops.c to drm_file.c

It's not just file ops, but drm_file stuff in general. This is prep
work to extracting a drm_file.h header in the next patch.

Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-8-daniel.vetter@ffwll.ch

drm/doc: document fallback behaviour for atomic events

Worst case if the hw can't support completion signalling in a
race-free way we want the event to be too late, not too early.

Text adapted from a proposal from Laurent - the other side of how to
make hw work correctly where it's possible is imo already sufficiently
documented.

v2: Review from Laurent.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-7-daniel.vetter@ffwll.ch

drm: Remove drmP.h include from drm_kms_helper_common.c

An easy one as a drive-by.

Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-6-daniel.vetter@ffwll.ch

drm: Extract drm_pci.h

Just another step in finally making drmP.h obsolete.

Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-5-daniel.vetter@ffwll.ch

drm: Move drm_lock_data out of drmP.h

And remove the semi-kernel-doc stuff, to make sure no one uses this.

Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-4-daniel.vetter@ffwll.ch

drm: Extract drm_prime.h

Plus a little bit more documentation.

v2: Untangle the missing forward decls to make drm_prime|gem.h
free-standing.

Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-3-daniel.vetter@ffwll.ch

drm/doc: Add todo about connector_list_iter

At least radeon, amdgpu and nouveau should be converted. We have
patches for i915 already.

v2: Spelling (Sean).

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-2-daniel.vetter@ffwll.ch

drm/qxl: Remove qxl_debugfs_remove_files()

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so it's not necessary to call drm_debugfs_remove_files().

Cc: airlied@linux.ie
Cc: kraxel@redhat.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307204924.1002-4-noralf@tronnes.org
[ kraxel: solved conflict ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/debugfs: Remove the drm_driver.debugfs_cleanup callback

Remove the .debugfs_cleanup() callback now that all the users are gone.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307204924.1002-3-noralf@tronnes.org

drm/msm: Remove msm_debugfs_cleanup()

Move the contents of msm_debugfs_cleanup() to msm_drm_uninit() to free
up the drm_driver->debugfs_cleanup callback. Also remove the
mdp_kms_funcs->debugfs_cleanup callback which has no users.

Cc: robdclark@gmail.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307204924.1002-2-noralf@tronnes.org

drm/dp: Add missing description to parameter

Gabriel Krisman reported these warnings when building the documentation:

 ./drivers/gpu/drm/drm_dp_helper.c:1165: warning: No description found
for parameter 'crtc'
./drivers/gpu/drm/drm_dp_helper.c:1166: warning: No description found
for parameter 'crtc'

Reported-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307203511.14258-1-tomeu.vizoso@collabora.com

drm: virtio: use kmem_cache

Just use kmem_cache instead of rolling
our own, limited implementation.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1488377348-5006-1-git-send-email-kraxel@redhat.com

qxl: fix qxl_conn_get_modes

Call qxl_add_monitors_config_modes() unconditionally.  Do all sanity
checks in that function.

Fix sanity checks.  monitors_config is the current monitor
configuration, whereas client_monitors_config is the configuration
requested by the spice client.  So when filling the mode list, based on
the spice client request, we need to look at
client_monitors_config->count not monitors_config->count.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-5-git-send-email-kraxel@redhat.com

qxl: read monitors config at boot

Try to read the client monitors config at driver load time, even without
explicit notification.  So in case that info was filled before the driver
loaded and we've missed the notifications because of that the settings
will still be used.

With that place we now have to take care to properly handle a empty client
monitors config, so we don't trip over an uninitialized client monitors
config.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-4-git-send-email-kraxel@redhat.com

qxl: limit monitor config read retries

When reading the monitor config fails, don't retry forever.  If it fails
ten times in a row just give up to avoid the driver hangs.  Also add a
small delay after each attempt, so the host has a chance to complete a
partial update.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-3-git-send-email-kraxel@redhat.com

qxl: drop mode_info.modes & related code.

very old qxl hardware revisions (predating qxl ksm support by a few
years) supported a fixed list of video modes only.  The list is still
provided by the virtual hardware, for backward compatibility reasons.

The qxl kms driver never ever looks at it, except for dumping it to
the kernel log at load time in case debug logging is enabled.  Drop
that pointless code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-2-git-send-email-kraxel@redhat.com

drm: qxl: Don't alloc fbdev if emulation is not supported

If fbdev emulation is disabled, the QXL shutdown path will try to clean
a framebuffer that wasn't initialized, hitting the Oops below.  The
problem is that even when FBDEV_EMULATION is disabled we allocate the
qfbdev strutucture, but we don't initialize it.  The fix is to stop
allocating the memory, since it won't be used.  This allows the existing
verification in the cleanup hook to do it's job preventing the oops.

Now that we don't allocate the unused fbdev structure, we need to be
careful when dereferencing it in the PM suspend hook.

[   24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0
[   24.285627] IP: mutex_lock+0x18/0x30
[   24.286049] PGD 78cdf067
[   24.286050] PUD 7940f067
[   24.286344] PMD 0
[   24.286649]
[   24.287072] Oops: 0002 [#1] SMP
[   24.287422] Modules linked in: qxl
[   24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ #97
[   24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[   24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000
[   24.290354] RIP: 0010:mutex_lock+0x18/0x30
[   24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246
[   24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000
[   24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0
[   24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001
[   24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000
[   24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060
[   24.295439] FS:  00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[   24.296364] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0
[   24.297813] Call Trace:
[   24.298097]  drm_framebuffer_cleanup+0x1f/0x70
[   24.298612]  qxl_fbdev_fini+0x68/0x90 [qxl]
[   24.299074]  qxl_modeset_fini+0xd/0x30 [qxl]
[   24.299562]  qxl_pci_remove+0x22/0x50 [qxl]
[   24.300025]  pci_device_remove+0x34/0xb0
[   24.300507]  device_release_driver_internal+0x150/0x200
[   24.301082]  device_release_driver+0xd/0x10
[   24.301587]  unbind_store+0x108/0x150
[   24.301993]  drv_attr_store+0x20/0x30
[   24.302402]  sysfs_kf_write+0x32/0x40
[   24.302827]  kernfs_fop_write+0x108/0x190
[   24.303269]  __vfs_write+0x23/0x120
[   24.303678]  ? security_file_permission+0x36/0xb0
[   24.304193]  ? rw_verify_area+0x49/0xb0
[   24.304636]  vfs_write+0xb0/0x190
[   24.305004]  SyS_write+0x41/0xa0
[   24.305362]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[   24.305887] RIP: 0033:0x7f30e31d9620
[   24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620
[   24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001
[   24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40
[   24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001
[   24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34
[   24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00
55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e>
48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3
[   24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0
[   24.313811] CR2: 00000000000002e0
[   24.314208] ---[ end trace 29669c1593cae14b ]---

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227203330.18542-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/rockchip: Fix link error when CONFIG_DRM_ANALOGIX_DP undefined

Fixes the following link error when CONFIG_DRM_ANALOGIX_DP is not defined:

ERROR: "analogix_dp_start_crc" [drivers/gpu/drm/rockchip/rockchipdrm.ko] undefined!
ERROR: "analogix_dp_stop_crc" [drivers/gpu/drm/rockchip/rockchipdrm.ko] undefined!

Fixes: 3190e58dafaf ("drm/rockchip: Implement CRC debugfs API")
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: Fix compilation error when CONFIG_DEBUG_FS is undefined

This patch fixes the following compilation error when CONFIG_DEBUG_FS is not defined.

../drivers/gpu/drm/drm_dp_helper.c: In function ‘drm_dp_aux_crc_work’:
../drivers/gpu/drm/drm_dp_helper.c:1029:13: error: ‘struct drm_crtc’ has no member named ‘crc’
../drivers/gpu/drm/drm_dp_helper.c:1031:12: error: ‘struct drm_crtc’ has no member named ‘crc’
  make[4]: *** [drivers/gpu/drm/drm_dp_helper.o] Error 1
  make[4]: *** Waiting for unfinished jobs....

Fixes: 79c1da7c3bf7 ("drm/dp: add helpers for capture of frame CRCs")
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/rockchip: Implement CRC debugfs API

Implement the .set_crc_source() callback and call the DP helpers
accordingly to start and stop CRC capture.

This is only done if this CRTC is currently using the eDP connector.

v3: Remove superfluous check on rockchip_crtc_state->output_type

v6: Remove superfluous variable

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303133936.14964-5-tomeu.vizoso@collabora.com

drm/bridge: analogix_dp: add helpers for capture of frame CRCs

Add two simple functions that just take the drm_dp_aux from our struct
and calls the corresponding DP helpers with it.

v6: Pass to the DP helper the drm_crtc of the current connector (Sean Paul)

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303133936.14964-4-tomeu.vizoso@collabora.com

drm/dp: add helpers for capture of frame CRCs

Adds helpers for starting and stopping capture of frame CRCs through the
DPCD. When capture is on, a worker waits for vblanks and retrieves the
frame CRC to put it in the queue on the CRTC that is using the
eDP connector, so it's passed to userspace.

v2: Reuse drm_crtc_wait_one_vblank
    Update locking, as drm_crtc_add_crc_entry now takes the lock

v3: Don't call wake_up_interruptible directly, that's now done in
    drm_crtc_add_crc_entry.

v4: Style fixes (Sean Paul)
    Reworked retry of CRC reads (Sean Paul)
    Flush worker after stopping CRC generationa (Sean Paul)

v5: Move back to make the retry explicitly once

v6: Set and use the drm_crtc backpointer (Sean Paul)

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303133936.14964-3-tomeu.vizoso@collabora.com

drm/dp: add crtc backpointer to drm_dp_aux

This backpointer allows DP helpers to access the crtc it's currently
being used for.

v6: Have the backpointer be to drm_crtc (Sean Paul)

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303133936.14964-2-tomeu.vizoso@collabora.com

drm/blend: Use new atomic iterator macros.

There are new iterator macros that annotate whether the new or old
state should be used. This is better than using a state that depends on
whether it's called before or after swap. For clarity, also rename the
variables from $obj_state to (old,new)_$obj_state as well.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487256430-7625-6-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/atomic: Convert get_existing_state callers to get_old/new_state, v4.

This is a straightforward conversion that converts all the users of
get_existing_state in atomic core to use get_old_state or get_new_state

Changes since v1:
- Fix using the wrong state in drm_atomic_helper_update_legacy_modeset_state.
Changes since v2:
- Use the correct state in disable_outputs()
Changes since v3:
- Rebase for link status training.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/df91a9f9-005e-bcbd-1f74-03c38e1e21dd@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/atomic: Add macros to access existing old/new state, v2.

After atomic commit, these macros should be used in place of
get_existing_state. Also after commit get_xx_state should no longer
be used because it may not have the required locks.

The calls to drm_atomic_get_existing_$obj_state should no longer be
used, and converted over to these new calls.

Changes since v1:
- Expand commit message.
- Deprecate get_existing_*_state functions in the documentation.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487256430-7625-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/atomic: Make drm_atomic_plane_disabling easier to understand.

This function becomes a lot simpler when having passed both the old and
new state to it. Looking at all callers, it seems that old_plane_state
is never NULL so the check can be dropped.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487256430-7625-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/atomic: Fix atomic helpers to use the new iterator macros, v3.

There are new iterator macros that annotate whether the new or old
state should be used. This is better than using a state that depends on
whether it's called before or after swap. For clarity, also rename the
variables from $obj_state to (old,new)_$obj_state as well.

Changes since v1:
- Use old/new_*_state for variable names as much as possible. (pinchartl)
- Expand commit message.
Changes since v2:
- Rebase on top of link training patches.
- free -> cleanup (pinchartl)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/aafa0d4d-474d-441f-3685-fa6c042ef37e@linux.intel.com
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: bridge: lvds-encoder: Add thine,thc63lvdm83d compatible string

The THC63LVDM83D is a transparent LVDS encoder. Unlike dumb LVDS
encoders it can be controlled through a few pins (power down, LVDS
swing, clock edge selection) and requires power supplies. However, on
several boards where the device is used neither the control pins nor the
power supply are controllable.

To avoid developing a separate device-specific driver add a
"thine,thc63lvdm83d" compatible entry to the lvds-encoder driver. This
will allow supporting many THC63LVDM83D-based boards easily, while
allowing future development of an thc63lvdm83d driver when needed
without breaking backward compatibility.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-5-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: vga-dac: Add adi,adv7123 compatible string

The ADV7123 is a transparent VGA DAC. Unlike dumb VGA DACs it can be
controlled through a power save pin, and requires a power supply.
However, on most boards where the device is used neither the power save
signal nor the power supply are controllable.

To avoid developing a separate device-specific driver add an
"adi,adv7123" compatible entry to the dumb-vga-dac driver. This will
allow supporting most ADV7123-based boards easily, while allowing future
development of an adv7123 driver when needed without breaking backward
compatibility.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-4-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: Add LVDS encoder driver

The LVDS encoder driver is a DRM bridge driver that supports the
parallel to LVDS encoders that don't require any configuration. The
driver thus doesn't interact with the device, but creates an LVDS
connector for the panel and exposes its size and timing based on
information retrieved from DT.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-3-laurent.pinchart+renesas@ideasonboard.com

devicetree/bindings: display: bridge: Add LVDS encoder DT bindings

The DT bindings support parallel to LVDS encoders that don't require any
configuration, similarly to the dumb VGA DAC DT bindings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-2-laurent.pinchart+renesas@ideasonboard.com

drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)

The video processing pipeline on the second output on the GE B850v3:

  Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output

Each bridge has a dedicated flash containing firmware for supporting the
custom design. The result is that in this design neither the STDP4028
nor the STDP2690 behave as the stock bridges would. The compatible
strings include the suffix "-ge-b850v3-fw" to make it clear that the
driver is for the bridges with the firmware which is specific for the GE
B850v3.

The driver is powerless to control the video processing pipeline, as the
two bridges behaves as a single one. The driver is only needed for
telling the host about EDID / HPD, and for giving the host powers to ack
interrupts.

This driver adds one i2c_device for each bridge, but only one
drm_bridge. This design allows the creation of a functional connector
that is capable of reading EDID from the STDP2690 while handling
interrupts on the STDP4028.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Enric Balletbo <enric.balletbo@collabora.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/ad92919f2eaff2623a551aac94cf11ef948ff9ee.1488555615.git.peter.senna@collabora.com

MAINTAINERS: Add entry for megachips-stdpxxxx-ge-b850v3-fw

Add MAINTAINERS entry for the second video output of the GE B850v3:
       STDP4028-ge-b850v3-fw bridges (LVDS-DP)
       STDP2690-ge-b850v3-fw bridges (DP-DP++)

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
CC: David Airlie <airlied@linux.ie>
CC: Thierry Reding <treding@nvidia.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/a62877dcaee004d82809fe77b6d154b65f466729.1488555615.git.peter.senna@collabora.com

dt-bindings: display: megachips-stdpxxxx-ge-b850v3-fw

Devicetree binding documentation for the second video output
of the GE B850v3:
   STDP4028-ge-b850v3-fw bridges (LVDS-DP)
   STDP2690-ge-b850v3-fw bridges (DP-DP++)

Added entry for MegaChips at:
 Documentation/devicetree/bindings/vendor-prefixes.txt

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/c2712336226c5170cfdc45103527fb2338d3d6cf.1488555615.git.peter.senna@collabora.com

drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.

If a CMA allocation failed, the partially constructed BO would be
unreferenced through the normal path, and we might choose to put it in
the BO cache.  If we then reused it before it expired from the cache,
the kernel would OOPS.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.")
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301185602.6873-2-eric@anholt.net

drm/vc4: Fulfill user BO creation requests from the kernel BO cache.

The from_cache flag was actually "the BO is invisible to userspace",
so we can repurpose it to just zero out a cached BO and return it to
userspace.

Improves wall time for a loop of 5 glsl-algebraic-add-add-1 by
-1.44989% +/- 0.862891% (n=28, 1 outlier removed from each that
appeared to be other system noise)

Note that there's an intel-gpu-tools test to check for the proper
zeroing behavior here, which we continue to pass.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301185602.6873-1-eric@anholt.net

Revert "drm/i915: Implement Link Rate fallback on Link training failure"

This reverts commit 233ce881dd91fb13eb6b09deefae33168e6ead4c.

I assumed it's ok, but really should have double-checked - CI caught
tons of fail :(

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301171749.13053-1-daniel.vetter@ffwll.ch

drm/fb-helper: implement ioctl FBIO_WAITFORVSYNC

Implement legacy framebuffer ioctl FBIO_WAITFORVSYNC in the generic
framebuffer emulation driver. Legacy framebuffer users like non kms/drm
based OpenGL(ES)/EGL implementations may require the ioctl to
synchronize drawing or buffer flip for double buffering. It is tested on
the i.MX6.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Update drm_fbdev_cma_init documentation

Commit be7f735cd5ea ("drm: Rely on mode_config data for fb_helper
initialization") dropped the num_crtc argument.  Update the
documentation to reflect that and prevent the kernel-doc warnings below:

./drivers/gpu/drm/drm_fb_cma_helper.c:557: warning: Excess function parameter 'num_crtc' description in 'drm_fbdev_cma_init'
./drivers/gpu/drm/drm_fb_cma_helper.c:558: warning: Excess function parameter 'num_crtc' description in 'drm_fbdev_cma_init'

Fixes: be7f735cd5ea ("drm: Rely on mode_config data for fb_helper initialization")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/87o9xkvn2m.fsf@dilma.collabora.co.uk

drm/rockchip/dsi: add dw-mipi power domain support

Reference the power domain incase dw-mipi power down when
in use.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1487577744-2855-8-git-send-email-zyw@rock-chips.com

drm/rockchip/dsi: fix insufficient bandwidth of some panel

Set the lanes bps to 1 / 0.9 times of pclk, the margin is not enough
for some panel, it will cause the screen display is not normal, so
increases the badnwidth to 1 / 0.8.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487577744-2855-7-git-send-email-zyw@rock-chips.com

dt-bindings: add power domain node for dw-mipi-rockchip

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487577744-2855-6-git-send-email-zyw@rock-chips.com

drm/rockchip/dsi: remove mode_valid function

The MIPI DSI do not need check the validity of resolution, the max
resolution should depend VOP. Hence, remove rk3288_mipi_dsi_mode_valid
here.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487577744-2855-5-git-send-email-zyw@rock-chips.com

drm/rockchip/dsi: dw-mipi: correct the coding style

correct the coding style, according the checkpatch scripts

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487577744-2855-4-git-send-email-zyw@rock-chips.com

drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi

The vopb/vopl switch register of RK3399 mipi is different from RK3288,
the default setting for mipi dsi mode is different too, so add a
of_device_id structure to distinguish them, and make sure set the
correct mode before mipi phy init.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487577744-2855-3-git-send-email-zyw@rock-chips.com

dt-bindings: add rk3399 support for dw-mipi-rockchip

The dw-mipi-dsi of rk3399 is almost the same as rk3288, the rk3399 has
additional phy config clock.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487577744-2855-2-git-send-email-zyw@rock-chips.com

drm/rockchip: dw-mipi-dsi: add reset control

In order to fully reset the state of the MIPI controller we must assert
this reset.

This is slightly more complicated than it could be in order to maintain
compatibility with device trees that do not specify the reset property.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-24-john@metanate.com

drm/rockchip: dw-mipi-dsi: support non-burst modes

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-23-john@metanate.com

drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded

This ensures that the output resolution is known before fbcon loads.
mipi_dsi_host_register() is moved above dw_mipi_dsi_register() to
simplify error cleanup since the order of these operations does not
matter.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-22-john@metanate.com

drm/rockchip: vop: test for P{H,V}SYNC

When connected to the MIPI DSI output, we need to use N{H,V}SYNC for the
internal connection but these flags are meaningless for DSI panels.
Switch the test so that we do not set the P{H,V}SYNC bits unless the
mode requires it.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict using macros instead of hardcoded values]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-21-john@metanate.com

drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC

This matches other drivers.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-20-john@metanate.com

drm/rockchip: dw-mipi-dsi: use specific poll helper

As the documentation for readx_poll_timeout says, we want to use the
specialized macro for readl rather than using the generic version
directly.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-19-john@metanate.com

drm/rockchip: dw-mipi-dsi: improve PLL configuration

The multiplication ratio for the PLL is required to be even due to the
use of a "by 2 pre-scaler".  Currently we are likely to end up with an
odd multiplier even though there is an equivalent set of parameters with
an even multiplier.

For example, using the 324MHz bit rate with a reference clock of 24MHz
we end up with M = 27, N = 2 whereas the example in the PHY databook
gives M = 54, N = 4 for this bit rate and reference clock.

By walking down through the available multiplier instead of up we are
more likely to hit an even multiplier.  With the above example we do now
get M = 54, N = 4 as given by the databook.

While doing this, change the loop limits to encode the actual limits on
the divisor, which are:

40MHz >= (pllref / N) >= 5MHz

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-18-john@metanate.com

drm/rockchip: dw-mipi-dsi: properly configure PHY timing

These values are specified as constant time periods but the PHY
configuration is in terms of the current lane byte clock so using
constant values guarantees that the timings will be outside the
specification with some display configurations.

Derive the necessary configuration from the byte clock in order to
ensure that the PHY configuration is correct.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-17-john@metanate.com

drm/rockchip: dw-mipi-dsi: configure PHY before enabling

The bias, bandgap and PLL should all be configured before we enable
them.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-16-john@metanate.com

drm/rockchip: dw-mipi-dsi: ensure PHY is reset

Also don't power up the DSI host at this point since this is not
necessary in order to configure the PHY and we do so later when
selecting video or command mode.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-15-john@metanate.com

drm/rockchip: dw-mipi-dsi: fix escape clock rate

This clock rate is derived from the PHY PLL, so it should be calculated
dynamically.  This calculation is the same as that used by the vendor
kernel and ensures that the escape clock runs at <20MHz as required by
the MIPI specification.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-14-john@metanate.com

drm/rockchip: dw-mipi-dsi: allow commands in panel_disable

Panel drivers may want to sent commands during the disable function, for
example MIPI_DCS_SET_DISPLAY_OFF before the video signal ends.  In order
to send commands we need to write to registers, so pclk must be enabled.

While changing this, remove the unnecessary code after the panel
unprepare call which seems to be a workaround for a specific panel and
thus belongs in the panel driver.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-13-john@metanate.com

drm/rockchip: dw-mipi-dsi: prepare panel after phy init

Some panels need to be configured with commands sent over the MIPI link,
which they will do in the prepare hook.  Call this after the PHY has
been initialized so that we are able to send commands to the panel.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-12-john@metanate.com

drm/rockchip: dw-mipi-dsi: don't assume buffer is aligned

By dereferencing the MIPI command buffer as a u32* we rely on it being
correctly aligned on ARM, but this may not be the case.  Copy it into a
stack variable that will be correctly aligned.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-11-john@metanate.com

drm/rockchip: dw-mipi-dsi: only request HS clock when required

Requesting the HS clock from the PHY before we initialize it causes an
invalid signal to be sent out since the input clock is not yet
configured.  The PHY databook suggests only asserting this signal when
performing HS transfers, so let's do that.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-10-john@metanate.com

drm/rockchip: dw-mipi-dsi: respect message flags

Instead of always sending commands in LP mode, respect the
MIPI_DSI_MSG_USE_LPM flag to decide how to send each message.  Also
request acks if MIPI_DSI_MSG_REQ_ACK is set.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-9-john@metanate.com

drm/rockchip: dw-mipi-dsi: include bad value in error message

As an aid to debugging.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-8-john@metanate.com

drm/rockchip: dw-mipi-dsi: avoid out-of-bounds read on tx_buf

As a side-effect of this, encode the endianness explicitly rather than
casting a u16.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-7-john@metanate.com

drm/rockchip: dw-mipi-dsi: fix generic packet status check

We want to check that both the GEN_CMD_EMPTY and GEN_PLD_W_EMPTY bits
are set so we can't just check "val & mask" because that will be true if
either bit is set.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-6-john@metanate.com

drm/rockchip: dw-mipi-dsi: fix command header writes

In a couple of places here we use "val" for the value that is about to
be written to a register but then reuse the same variable for the value
of a status register before we get around to writing it.  Rename the
value to be written to so that we write the value we intend to and not
what we have just read from the status register.

Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-5-john@metanate.com

drm/rockchip: dw-mipi-dsi: remove mode_set hook

This is not needed since we can access the mode via the CRTC from the
enable hook.  Also remove the "mode" field that is no longer used.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-4-john@metanate.com

drm/rockchip: dw-mipi-dsi: pass mode in where needed

This shows that we only use the mode from the enable function and
prepares us to remove the "mode" field and the mode_set hook in the next
commit.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-3-john@metanate.com

drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI

With atomic modesetting the hardware will be powered off when the
mode_set function is called.  We should configure the hardware in the
enable function, which is the atomic version of "commit" so let's use
the enable hook rather than commit while we're at it.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-2-john@metanate.com

drm/i915: Implement Link Rate fallback on Link training failure

If link training at a link rate optimal for a particular
mode fails during modeset's atomic commit phase, then we
let the modeset complete and then retry. We save the link rate
value at which link training failed, update the link status property
to "BAD" and use a lower link rate to prune the modes. It will redo
the modeset on the current mode at lower link rate or if the current
mode gets pruned due to lower link constraints then, it will send a
hotplug uevent for userspace to handle it.

This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4,
4.3.1.6.

v9:
* Use the trimmed max values of link rate/lane count based on
link train fallback (Daniel Vetter)
v8:
* Set link_status to BAD first and then call mode_valid (Jani Nikula)
v7:
Remove the redundant variable in previous patch itself
v6:
* Obtain link rate index from fallback_link_rate using
the helper intel_dp_link_rate_index (Jani Nikula)
* Include fallback within intel_dp_start_link_train (Jani Nikula)
v5:
* Move set link status to drm core (Daniel Vetter, Jani Nikula)
v4:
* Add fallback support for non DDI platforms too
* Set connector->link status inside set_link_status function
(Jani Nikula)
v3:
* Set link status property to BAd unconditionally (Jani Nikula)
* Dont use two separate variables link_train_failed and link_status
to indicate same thing (Jani Nikula)
v2:
* Squashed a few patches (Jani Nikula)

Acked-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d796cc0c2814d668a47ef43c464f9a4089d46d64.1481883920.git.jani.nikula@intel.com

drm: Fix the kernel doc warning for drm_link_status

This fixes the kernel doc warning that was introduced in
the 'commit 40ee6fbef75fe6 ("drm: Add a new connector
atomic property for link status")'. Description has
been added for the enum values.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1488379510-15059-1-git-send-email-manasi.d.navare@intel.com

drm/msm: Remove drm_debugfs_remove_files() calls

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so it's not necessary to call
drm_debugfs_remove_files(). Additionally it uses
debugfs_remove_recursive() to clean up the debugfs files, so no need
to do that.

Cc: robdclark@gmail.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-10-noralf@tronnes.org

drm/i915: Remove i915_debugfs_unregister()

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so no need to do this explicitly. Additionally it
uses debugfs_remove_recursive() to clean up the debugfs files,
so no need for adding fake drm_info_node entries.

Cc: daniel.vetter@intel.com
Cc: jani.nikula@linux.intel.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-20-noralf@tronnes.org

drm/qxl: Remove qxl_debugfs_takedown()

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: airlied@linux.ie
Cc: kraxel@redhat.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-19-noralf@tronnes.org

drm/virtio: Remove virtio_gpu_debugfs_takedown()

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: airlied@linux.ie
Cc: kraxel@redhat.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-18-noralf@tronnes.org

drm/nouveau: Remove nouveau_drm_debugfs_cleanup()

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed. Additionally it uses debugfs_remove_recursive() to clean
up the debugfs files, so no need for adding fake drm_info_node
entries.

Cc: bskeggs@redhat.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-11-noralf@tronnes.org

drm/armada: Remove armada_drm_debugfs_cleanup()

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so no need to do this explicitly. Additionally it
uses debugfs_remove_recursive() to clean up the debugfs files,
so no need for adding fake drm_info_node entries.
And finally there's no need to clean up on error,
drm_debugfs_cleanup() is called in the error path.

Cc: linux@armlinux.org.uk
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-6-noralf@tronnes.org

MAINTAINERS: drm-meson: Update git entries

Add the main git entry and the drm-misc experiment git for small
patches.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488360018-16835-1-git-send-email-narmstrong@baylibre.com

drivers:gpu: vga :vga_switcheroo.c : Fixed some coding style issues

Fixed the following style issues

drivers/gpu/vga/vga_switcheroo.c:98: WARNING: please, no space before tabs
drivers/gpu/vga/vga_switcheroo.c:99: WARNING: please, no space before tabs
drivers/gpu/vga/vga_switcheroo.c:102: WARNING: please, no space before tabs
drivers/gpu/vga/vga_switcheroo.c:103: WARNING: please, no space before tabs
drivers/gpu/vga/vga_switcheroo.c:129: WARNING: please, no space before tabs
drivers/gpu/vga/vga_switcheroo.c:135: WARNING: please, no space before tabs
drivers/gpu/vga/vga_switcheroo.c:217: WARNING: line over 80 characters
drivers/gpu/vga/vga_switcheroo.c:218: WARNING: line over 80 characters
drivers/gpu/vga/vga_switcheroo.c:308: WARNING: please, no space before tabs
drivers/gpu/vga/vga_switcheroo.c:340: WARNING: line over 80 characters
drivers/gpu/vga/vga_switcheroo.c:1087: WARNING: Block comments use * on subsequent lines
drivers/gpu/vga/vga_switcheroo.c:1087: WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: Joan Jani <igiann@hotmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/HE1PR1001MB1148F38207BC31C860FAF06DC9560@HE1PR1001MB1148.EURPRD10.PROD.OUTLOOK.COM

gpu: drm: drivers: Convert printk(KERN_<LEVEL> to pr_<level>

Use a more common logging style.

Miscellanea:

o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/76355db47b31668bb64d996865ceee53bd66b11f.1488285953.git.joe@perches.com

MAINTAINERS: Update git entries for drivers in drm-misc

It's still just an experiment, but one lesson learned from drm-misc is
that not updating MAINTAINERS just leads to confusion. And this is
easy to revert.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228193657.3559-1-daniel.vetter@ffwll.ch

drm/vc4: Add a paragraph at the top of vc4 docs introducing what it is.

This makes for more sensible documentation of the whole module than
jumping straight into the details of display.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227201144.10970-5-eric@anholt.net

drm/vc4: Extend and edit documentation for output from the RST

I had written most of my comments as if I was describing the
individual code files the way I used to for doxygen, while for RST we
want to describe things in a more chapter/section way where there's no
obvious relation to .c files.

Additionally, several of the files had stub descriptions that I've
taken this opportunity to extend.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227201144.10970-4-eric@anholt.net