Alex Deucher [Thu, 11 Jul 2013 19:00:14 +0000 (15:00 -0400)]
drm/radeon/dpm: disable gfx PG on PALM
Gfx PG doesn't seem to work properly when UVD is initialized
on certain PALM boards. Disable gfx PG for now until we sort
out a proper fix.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 22:16:56 +0000 (18:16 -0400)]
drm/radeon/hdmi: make sure we have an afmt block assigned
Prevents a segfault if an afmt block is not assigned to the
encoder such as in the LVDS or eDP case.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66714
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Dave Airlie [Tue, 9 Jul 2013 00:49:39 +0000 (10:49 +1000)]
Merge branch 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more DPM fixes based on user testing.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: implement vblank_too_short callback for si
drm/radeon/dpm: implement vblank_too_short callback for cayman
drm/radeon/dpm: implement vblank_too_short callback for btc
drm/radeon/dpm: implement vblank_too_short callback for evergreen
drm/radeon/dpm: implement vblank_too_short callback for 7xx
drm/radeon/dpm: add checks against vblank time
drm/radeon/dpm: add helper to calculate vblank time
drm/radeon: remove stray line in old pm code
drm/radeon/dpm: fix display_gap programming on rv7xx
drm/radeon/dpm: implement force performance level for TN
drm/radeon/dpm: implement force performance level for ON/LN
drm/radeon/dpm: implement force performance level for SI
drm/radeon/dpm: implement force performance level for cayman
drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
drm/radeon/dpm: add infrastructure to force performance levels
drm/radeon: fix surface setup on r1xx
drm/radeon: add support for 3d perf states on older asics
drm/radeon: set default clocks for SI when DPM is disabled
Dave Airlie [Tue, 9 Jul 2013 00:48:41 +0000 (10:48 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Two minor fixes for regressions.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/gr: fix gpc firmware regression
drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
Alex Deucher [Mon, 8 Jul 2013 16:15:11 +0000 (12:15 -0400)]
drm/radeon/dpm: implement vblank_too_short callback for si
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 16:09:41 +0000 (12:09 -0400)]
drm/radeon/dpm: implement vblank_too_short callback for cayman
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 16:03:55 +0000 (12:03 -0400)]
drm/radeon/dpm: implement vblank_too_short callback for btc
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 15:56:09 +0000 (11:56 -0400)]
drm/radeon/dpm: implement vblank_too_short callback for evergreen
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 15:49:48 +0000 (11:49 -0400)]
drm/radeon/dpm: implement vblank_too_short callback for 7xx
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 15:35:06 +0000 (11:35 -0400)]
drm/radeon/dpm: add checks against vblank time
If the vblank time is too short to adjust mclk,
assume multiple displays (no mclk adjustments).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 15:26:42 +0000 (11:26 -0400)]
drm/radeon/dpm: add helper to calculate vblank time
Required for checking vblank time for mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 21:14:51 +0000 (17:14 -0400)]
drm/radeon: remove stray line in old pm code
Looks like a remnant from an old rebase.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jul 2013 21:20:13 +0000 (17:20 -0400)]
drm/radeon/dpm: fix display_gap programming on rv7xx
Check the driver state rather than the register as the
crtc registers may not be enabled yet.
Should fix:
https://bugzilla.kernel.org/show_bug.cgi?id=60510
https://bugs.freedesktop.org/show_bug.cgi?id=66651
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maarten Lankhorst [Sun, 7 Jul 2013 08:37:48 +0000 (10:37 +0200)]
drm/nvc0/gr: fix gpc firmware regression
"drm/nve0-/gr: some new gpc registers can have multiple copies"
5ee86c4190f9e caused a regression for nvc0, because the bit indicating last
transfer has occured was no longer set, resulting in random system lockups.
Reported-by: Ronald Uitermark <ronald645@gmail.com>
Tested-by: Ronald Uitermark <ronald645@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Jul 2013 00:40:35 +0000 (10:40 +1000)]
drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alex Deucher [Tue, 2 Jul 2013 22:52:10 +0000 (18:52 -0400)]
drm/radeon/dpm: implement force performance level for TN
Allows you to force the selected performance level via sysfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jul 2013 22:50:09 +0000 (18:50 -0400)]
drm/radeon/dpm: implement force performance level for ON/LN
Allows you to force the selected performance level via sysfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jul 2013 22:46:28 +0000 (18:46 -0400)]
drm/radeon/dpm: implement force performance level for SI
Allows you to force the selected performance level via sysfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jul 2013 22:43:53 +0000 (18:43 -0400)]
drm/radeon/dpm: implement force performance level for cayman
Allows you to force a performance level via sysfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jul 2013 22:40:35 +0000 (18:40 -0400)]
drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
Allows you to limit the selected power levels via sysfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jul 2013 22:38:02 +0000 (18:38 -0400)]
drm/radeon/dpm: add infrastructure to force performance levels
This allows you to force specific power levels within a power
state. Due to hardware restrictions between generations, the
interface is limited to the following 3 selections:
auto: all levels enabled
low: forced to the lowest power level
high: forced to the highest power level
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 5 Jul 2013 14:05:49 +0000 (10:05 -0400)]
drm/radeon: fix surface setup on r1xx
r1xx asics have a slightly different surface register
setup compared to newer asics. There is no specific
enable bit for macro tiling, rather, to disable macro
tiling, you need to set the surface pitch to 0.
With this fixed, the special rn50 handling can go.
Noticed-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 5 Jul 2013 15:48:31 +0000 (11:48 -0400)]
drm/radeon: add support for 3d perf states on older asics
Certain older rv770 asics have both a performance and
a 3D performance state rather than just multiple performance
levels in the state power state. The current code would
select the performance state rather than the 3D performance
state when the "performance" profile was selected. This change
switches to the "balanced" profile by default which ends up being
the internal performance profile. When the user selects the
"performance" profile, it selects the internal 3D performance
state so the user can select the higher performance modes.
For most asics this changes nothing. For certain rv770 asics
with static performance and 3D performance states, this allows
you to select between then using by selecting the "balanced"
and "performance" dpm profiles.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 5 Jul 2013 17:14:30 +0000 (13:14 -0400)]
drm/radeon: set default clocks for SI when DPM is disabled
Fix patching of vddc values for SI and enable manually forcing
clocks to default levels as per NI.
This improves the out of the box performance with SI asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 5 Jul 2013 05:55:12 +0000 (15:55 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
- GF117 acceleration support
- GK110 acceleration-with-blob-ucode support, and initial work towards
fixing our own ucode to be suitable.
- Large cleanups of fermi/kepler context handling
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (22 commits)
drm/nva3/disp: Fix HDMI audio regression
drm/nv50-/disp: Use output specific mask in interrupt
drm/nouveau: use vmalloc for pgt allocation
drm/nvc0-/gr: remove some more of the hardcoded register writes
drm/nvc0-/gr: factor out yet more unknown magic into versioned functions
drm/nvd7/devinit: use fermi class, not tesla
drm/nvf0-/gr: ctxsw scratch reg count got bumped to 16
drm/nvc0-/gr: remove hardcoding of UNK count/mask in GPCCS ucode
drm/nvf0/gr: build cs ucode for GK110
drm/nvc0-/gr: extend one of the magic calculations for >4 GPCs
drm/nvf0/gr: fix ddx shaders locking up on me
drm/nvc0/devinit: minor typo
drm/nvf0/gr: enable support, if external cs ucode is available
drm/nvf0/gr: magic sequence that makes PGRAPH come out of hiding
drm/nvf0/ce: enable support
drm/nvf0/fifo: enable support
drm/nvd7/gr: initial support
drm/nvc0-/gr: generate cs register lists from grctx data
drm/nvc0-/gr: tpc regs a subset of gpc, add separate list for gpc/unk regs
drm/nve0-/gr: some new gpc registers can have multiple copies
...
Joonyoung Shim [Fri, 28 Jun 2013 05:24:55 +0000 (14:24 +0900)]
drm/cma: remove GEM CMA specific dma_buf functionality
We can use prime helpers instead.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Joonyoung Shim [Fri, 28 Jun 2013 05:24:54 +0000 (14:24 +0900)]
drm/cma: add low-level hook functions to use prime helpers
Instead of using the dma_buf functionality for GEM CMA, we can use prime
helpers if we can provide low-level hook functions for GEM CMA.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Joonyoung Shim [Fri, 28 Jun 2013 05:24:53 +0000 (14:24 +0900)]
drm: add mmap function to prime helpers
This adds to call low-level mmap() from prime helpers.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Joonyoung Shim [Thu, 4 Jul 2013 07:19:12 +0000 (16:19 +0900)]
drm/prime: fix sgt NULL checking
The drm_gem_map_detach() can be called with sgt is NULL.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 5 Jul 2013 05:35:38 +0000 (15:35 +1000)]
Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
This is final pull request for 3.11. This resolves some memory leak
issues, and includes some code and dt document file cleanups; just
removed unnecessary descriptions.
And the patch work for enhancing hdmiphy driver isn't in progress so
this patch may go to 3.12.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: remove duplicated error routine and unnecessary assign
drm/exynos: fix pages allocation size in lowlevel_buffer_allocate
drm/exynos: use drm_calloc_large when allocates pointer array
drm/exynos: add error check routine in exynos_drm_open
drm/exynos: initialize the buf_num in vp_video_buffer
drm/exynos: remove dead code in vidi_power_on
drm/exynos: fix not to remain exynos_gem_obj as a leak
of/documentation: Update hpd gpio property for exynos_hdmi
Laurent Pinchart [Thu, 4 Jul 2013 18:05:51 +0000 (20:05 +0200)]
drm/rcar-du: Fix buffer pitch alignment
The DU requires a 16 pixels pitch alignement. Make sure dumb buffers are
allocated with the correct pitch, and validate the pitch when creating
frame buffers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Laurent Pinchart [Thu, 4 Jul 2013 18:05:50 +0000 (20:05 +0200)]
drm/rcar-du: Don't ignore rcar_du_crtc_create() return value
Handle error cases correctly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ilia Mirkin [Wed, 3 Jul 2013 07:06:02 +0000 (03:06 -0400)]
drm/nva3/disp: Fix HDMI audio regression
This is the nva3 counterpart to commit
beba44b17 (drm/nv84/disp: Fix
HDMI audio regression). The regression happened as a result of
refactoring in commit
8e9e3d2de (drm/nv84/disp: move hdmi control into
core).
Reported-and-tested-by: Max Baldwin <archerseven@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Emil Velikov [Tue, 2 Jul 2013 13:44:12 +0000 (14:44 +0100)]
drm/nv50-/disp: Use output specific mask in interrupt
The commit
commit
476e84e126171d809f9c0b5d97137f5055f95ca8
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon Feb 11 09:24:23 2013 +1000
drm/nv50-/disp: initial supervisor support for off-chip encoders
changed the write mask in one of the interrupt functions for on-chip encoders,
causing a regression in certain VGA dual-head setups. This commit reintroduces
the mask thus resolving the regression
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66129
Reported-and-Tested-by: Yves-Alexis <corsac@debian.org>
Cc: stable@vger.kernel.org [3.9+]
CC: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Tue, 11 Jun 2013 08:50:30 +0000 (10:50 +0200)]
drm/nouveau: use vmalloc for pgt allocation
Page tables on nv50 take 48kB, which can be hard to allocate in one piece.
Let's use vmalloc.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@vger.kernel.org [3.7+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Jul 2013 00:47:26 +0000 (10:47 +1000)]
drm/nvc0-/gr: remove some more of the hardcoded register writes
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Jul 2013 00:26:20 +0000 (10:26 +1000)]
drm/nvc0-/gr: factor out yet more unknown magic into versioned functions
NVC1/NVD9 are the only chipsets that should have anything different
happen on them after this. We previously weren't doing these
register modifications, and NVIDIA do.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 07:37:23 +0000 (17:37 +1000)]
drm/nvd7/devinit: use fermi class, not tesla
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 04:56:38 +0000 (14:56 +1000)]
drm/nvf0-/gr: ctxsw scratch reg count got bumped to 16
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 03:49:47 +0000 (13:49 +1000)]
drm/nvc0-/gr: remove hardcoding of UNK count/mask in GPCCS ucode
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 03:03:59 +0000 (13:03 +1000)]
drm/nvf0/gr: build cs ucode for GK110
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 02:58:16 +0000 (12:58 +1000)]
drm/nvc0-/gr: extend one of the magic calculations for >4 GPCs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 02:54:28 +0000 (12:54 +1000)]
drm/nvf0/gr: fix ddx shaders locking up on me
This can be generalised and used on GK104 (probably even GF117), but lets
just make it work for now.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 01:48:46 +0000 (11:48 +1000)]
drm/nvc0/devinit: minor typo
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 01:17:33 +0000 (11:17 +1000)]
drm/nvf0/gr: enable support, if external cs ucode is available
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 4 Jul 2013 01:01:34 +0000 (11:01 +1000)]
drm/nvf0/gr: magic sequence that makes PGRAPH come out of hiding
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 2 May 2013 02:38:41 +0000 (12:38 +1000)]
drm/nvf0/ce: enable support
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 2 May 2013 02:37:38 +0000 (12:37 +1000)]
drm/nvf0/fifo: enable support
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Thu, 4 Jul 2013 00:04:30 +0000 (10:04 +1000)]
drm/nvd7/gr: initial support
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Jul 2013 05:11:24 +0000 (15:11 +1000)]
drm/nvc0-/gr: generate cs register lists from grctx data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Jul 2013 04:48:33 +0000 (14:48 +1000)]
drm/nvc0-/gr: tpc regs a subset of gpc, add separate list for gpc/unk regs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Jul 2013 04:32:42 +0000 (14:32 +1000)]
drm/nve0-/gr: some new gpc registers can have multiple copies
GK110 exposes more than one, and needs to be dealt with in the ctxsw
ucode just like the TPC sets are.
Broadcast is at +0xe00.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Jul 2013 00:54:27 +0000 (10:54 +1000)]
drm/nvc0-/gr: pull out a group of separately context-switched gpc regs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 9 Jun 2013 06:08:22 +0000 (16:08 +1000)]
drm/nvc0-/gr: make register lists from initvals functions
Generated context verified to be the same for all supported chipsets.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Fri, 5 Jul 2013 00:55:33 +0000 (10:55 +1000)]
Merge branch 'qxl-next' of git://people.freedesktop.org/~airlied/linux into drm-next
Adds 3 features that UMS had to the KMS driver.
dynamic resizing - resizing remote-viewer makes guest resize
multiple crtcs - remote-viewer can access > 1 crtc.
suspend/resume/hibernate: guests can do suspend/resume/hibernate now.
* 'qxl-next' of git://people.freedesktop.org/~airlied/linux:
qxl: use drm helper hotplug support
qxl: add suspend/resume/hibernate support.
qxl: add fb and ttm entry points for use by suspend/resume.
qxl: add ring prep code for s/r
qxl: prepare memslot code for suspend/resume
qxl: split monitors_config object creation out.
drm/qxl: set time on drawables from userspace
drm/qxl: add support for > 1 output
drm/qxl: make dynamic resizing work properly.
Dave Airlie [Fri, 5 Jul 2013 00:20:33 +0000 (10:20 +1000)]
qxl: use drm helper hotplug support
This uses the helper to deal with hotplug so fbdev gets included.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 05:02:33 +0000 (15:02 +1000)]
qxl: add suspend/resume/hibernate support.
This adds suspend/resume and hibernate support for the KMS driver. it evicts
all the objects, turns off the outputs, and waits for the hw to go idle,
On resume, it resets the memslots, rings, monitors object and forces modeset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 04:59:34 +0000 (14:59 +1000)]
qxl: add fb and ttm entry points for use by suspend/resume.
This just ports some APIs like radeon uses to provide hooks for s/r to
call.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 04:58:45 +0000 (14:58 +1000)]
qxl: add ring prep code for s/r
This prepare the ring code for s/r additions, the release ring will need
reinitialising.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 04:57:58 +0000 (14:57 +1000)]
qxl: prepare memslot code for suspend/resume
this splits out initing the hw memslots from the guest info, and
creates an entrypoint for s/r to use.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 04:46:46 +0000 (14:46 +1000)]
qxl: split monitors_config object creation out.
This splits the creation of the monitors config object out so we can
re-use it across suspend/resume later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Jul 2013 09:44:50 +0000 (10:44 +0100)]
drm/qxl: set time on drawables from userspace
This just sets the qxl time on the drawables.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Jul 2013 05:37:13 +0000 (06:37 +0100)]
drm/qxl: add support for > 1 output
This adds support for a default of 4 heads, with a command line
parameter to change the default number.
It also overhauls the modesetting code to handle this case properly,
and send the correct things to the hardware at the right time.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 1 Jul 2013 04:14:38 +0000 (14:14 +1000)]
drm/qxl: make dynamic resizing work properly.
qxl has a feature to allow the userspace driver do arbitrary resizes
when the viewer resizes, this fixes it by removing unnecessary code
from the kernel side.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Seung-Woo Kim [Wed, 3 Jul 2013 08:09:21 +0000 (17:09 +0900)]
drm/exynos: remove duplicated error routine and unnecessary assign
There were duplicated error handling routines during allocating
pages in lowlevel_buffer_allocate() and g2d_userptr_get_dma_addr().
Also unnecessary NULL assignments for variable used not any more
are removed from g2d_userptr_get_dma_addr() and
g2d_userptr_put_dma_addr().
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Wed, 3 Jul 2013 08:09:20 +0000 (17:09 +0900)]
drm/exynos: fix pages allocation size in lowlevel_buffer_allocate
When IOMMU is not supported, buf->pages has to be allocated to
assign the result of phys_to_page() which return type is struct
page *. So it is sufficient to allocate buf->pages with the size
of multiple struct page pointers.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Wed, 3 Jul 2013 08:09:19 +0000 (17:09 +0900)]
drm/exynos: use drm_calloc_large when allocates pointer array
If the type of object is pointer array, the drm_calloc_large() is
more suitable than kzalloc() for its allocation function. And uses
drm_free_large() instead of kfree() also.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 1 Jul 2013 08:00:47 +0000 (17:00 +0900)]
drm/exynos: add error check routine in exynos_drm_open
When the exynos_drm_subdrv_open() returns error, the file_priv
should be released and file->driver_priv set to NULL.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 1 Jul 2013 04:04:12 +0000 (13:04 +0900)]
drm/exynos: initialize the buf_num in vp_video_buffer
The buf_num in vp_video_buffer() should be 1 or 2, but it is not
initialized, and only set to 2 in NV12M or NV12MT cases.
So this patch initializes the buf_num with 1 as default.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 1 Jul 2013 04:03:39 +0000 (13:03 +0900)]
drm/exynos: remove dead code in vidi_power_on
The type of input parameter enable is bool, so it does not need
to check whether true or false.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 1 Jul 2013 02:17:12 +0000 (11:17 +0900)]
drm/exynos: fix not to remain exynos_gem_obj as a leak
The exynos_drm_gem_create() only calls drm_gem_object_release()
when exynos_drm_alloc_buf() is failed, and exynos_gem_obj remains
as a leak, which is allocated in exynos_drm_gem_init().
So this patch fixes it not to remain as a leak.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Sachin Kamat [Mon, 1 Jul 2013 06:15:36 +0000 (15:15 +0900)]
of/documentation: Update hpd gpio property for exynos_hdmi
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Daniel Vetter [Mon, 1 Jul 2013 20:05:53 +0000 (22:05 +0200)]
drm/mm: kill color_search_free/get_block
drm/i915 is the only user of the color allocation handling and
switched to insert_node a while ago. So we can ditch this.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Seung-Woo Kim [Mon, 1 Jul 2013 10:44:14 +0000 (19:44 +0900)]
drm: fix print format of sequence in trace point
seq of a trace point is unsigned int but print format was %d. So
it fixes the format as %u.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Seung-Woo Kim [Tue, 2 Jul 2013 00:53:28 +0000 (09:53 +0900)]
drm: fix error routines in drm_open_helper
There are missing parts to handle error in drm_open_helper().
The priv->minor, assigned by idr_find() which can return NULL,
should be checked whether it is NULL or not before referencing it.
put_pid(), drm_gem_release(), and drm_prime_destory_file_private()
should be called when error happens after their pair functions are
called. If an error occurs after executing dev->driver->open()
which allocates driver specific per-file private data, then the
private data should be released.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Seung-Woo Kim [Tue, 2 Jul 2013 08:57:04 +0000 (17:57 +0900)]
drm: add assertion for checking null edid to drm_edid_block_valid
If raw_edid of drm_edid_block_vaild() is null, it will crash, so
checking in bad label is removed and instead assertion is added at
the top of the function.
The type of return for the function is bool, so it fixes to return
true and false instead of 1 and 0.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Shuah Khan [Mon, 1 Jul 2013 22:06:02 +0000 (16:06 -0600)]
drm: Convert drm class driver from legacy pm ops to dev_pm_ops
Convert drivers/gpu/drm class to use dev_pm_ops for power management and
remove Legacy PM ops hooks. With this change, drm class registers
suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy
class->suspend/resume. When __device_suspend() runs call-backs, it will
find class->pm ops for the drm class.
drm_class_suspend() hook calls driver legacy ops with the state information.
e.g: drm_class_suspend() calls into driver suspend routines
via drm_dev->driver->suspend(drm_dev, state).
Once drm_class_suspend() is converted to dev_pm_ops, it will no longer
have access to pm_transition which it has to pass into driver legacy
suspend calls. A new freeze and suspend hooks are added to address the not
having access to the state information. The new freeze and suspend hooks
simply call __drm_class_suspend() with the appropriate pm state information.
__drm_class_suspend() is the original suspend hook with a new name.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 00:46:17 +0000 (10:46 +1000)]
Merge tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Pile of fixes for 3.11. A bit large in patch count, but that's simply due
to two fixes being split up into really small parts. Also I've included a
few more vlv patches than I'd have included for other platforms. But since
vlv is officially supported for the first time only in 3.11 that shouldn't
result in unbearable risks.
Highlights:
- ghost eDP fixes for hsw from Paulo
- fix PCH detection in virtualized enviroments (Rui Guo)
- duct-tape dma sg construction when swiotlb is in use (Konrad), dupe with
a patch in your drm-fixes branch
- fix sdvo hotplug on i965g
- tune down a bunch of dmesg ERRORs which can be hit under normal
conditions
- detect invalid pitches for tiled scanout buffers (Chris)
- a pile of vlv fixes from Ville: rps improvements, fixes for the dpll
LPF, fixup the sprite mmio offsets
- fix context size on hsw (Ben)
- locking fixes for the hotplug code, specifically the storm handling
- fix get_config on CPT (Xiong Zhang)
- Fix the domain tracking when an unlocked seqno wait was interrupt
(Chris), this seems to explain tons of little corruption bugs in the
ddx. Chris also added a nice igt to exercise this.
- work around stack-corrupting vnsprintf in our error state dumper
* tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel: (39 commits)
drm/i915: Don't try to tear down the stolen drm_mm if it's not there
drm/i915: Break up the large vsnprintf() in print_error_buffers()
drm/i915: Refactor the wait_rendering completion into a common routine
drm/i915: Only clear write-domains after a successful wait-seqno
drm/i915: correct intel_dp_get_config() function for DevCPT
drm/i915: fix hpd interrupt register locking
drm/i915: fold the no-irq check into intel_hpd_irq_handler
drm/i915: fold the queue_work into intel_hpd_irq_handler
drm/i915: fold the hpd_irq_setup call into intel_hpd_irq_handler
drm/i915: s/hotplug_irq_storm_detect/intel_hpd_irq_handler/
drm/i915: close tiny race in the ilk pcu even interrupt setup
drm/i915: fix locking around ironlake_enable|disable_display_irq
drm/i915: Fix context sizes on HSW
drm/i915: Fix VLV sprite register offsets
Revert "drm/i915: Don't use the HDMI port color range bit on Valleyview"
drm/i915: s/LFP/LPF in DPIO PLL register names
drm/i915: Fix VLV PLL LPF coefficients for DAC
drm/i915: Jump to at least RPe on VLV when increasing the GPU frequency
drm/i915: Don't increase the GPU frequency from the delayed VLV rps timer
drm/i915: GEN6_RP_INTERRUPT_LIMITS doesn't seem to exist on VLV
...
Dave Airlie [Thu, 4 Jul 2013 00:44:06 +0000 (10:44 +1000)]
Merge branch 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more DPM fixes.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag
drm/radeon/tn: disable PG when changing UVD clocks
drm/radeon/sumo: disable PG when changing UVD clocks
drm/radeon/aruba: disable additional rlc features
drm/radeon: fix endian bug in radeon_atom_get_mclk_range_table()
drm/radeon/dpm: fix compilation with certain versions of gcc
drm/radeon/dpm: clarify debugfs warning
Daniel Vetter [Mon, 1 Jul 2013 20:01:04 +0000 (22:01 +0200)]
drm/mm: WARN for unclean mm takedown
The usual drm driver has tons of different drm_mm memory managers so the drm
error message in dmesg is pretty useless. WARN instead so that we have the full
backtrace.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Mon, 1 Jul 2013 20:01:02 +0000 (22:01 +0200)]
drm/mm: fix debug table BUG
In
commit
3a359f0b21ab218c1bf7a6a1b638b6fd143d0b99
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Apr 20 12:08:11 2013 +0200
drm/mm: fix dump table BUG
I've failed to fix both instances of the regression introduced in
commit
9e8944ab564f2e3dde90a518cd32048c58918608
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 15 11:32:17 2012 +0000
drm: Introduce an iterator over holes in the drm_mm range manager
Patch this up in the same way by extracting the hole debug logic
into it's own function, since that'll also clarify the logic a bit.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 2 Jul 2013 07:18:39 +0000 (09:18 +0200)]
drm/prime: fix up handle_to_fd ioctl return value
In
commit
da34242e5e0638312130f5bd5d2d277afbc6f806
Author: YoungJun Cho <yj44.cho@samsung.com>
Date: Wed Jun 26 10:21:42 2013 +0900
drm/prime: add return check for dma_buf_fd
the failure case handling was fixed up. But in the case when we
already had the buffer exported it changed the return value:
Previously we've return 0 on success, now we return the fd.
This ABI change has been caught by i-g-t/prime_self_import/with_one_bo.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66436
Cc: YoungJun Cho <yj44.cho@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: lu hua <huax.lu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 3 Jul 2013 19:14:25 +0000 (15:14 -0400)]
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag
Some asic revisions need to disable PG when UVD is active.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jul 2013 19:01:45 +0000 (15:01 -0400)]
drm/radeon/tn: disable PG when changing UVD clocks
Causes hangs for some people.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jul 2013 19:07:28 +0000 (15:07 -0400)]
drm/radeon/sumo: disable PG when changing UVD clocks
Causes hangs for some people.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jul 2013 16:02:10 +0000 (12:02 -0400)]
drm/radeon/aruba: disable additional rlc features
They cause problems with dynamic clocking.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jul 2013 15:18:08 +0000 (11:18 -0400)]
drm/radeon: fix endian bug in radeon_atom_get_mclk_range_table()
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mike Lothian [Tue, 2 Jul 2013 21:38:11 +0000 (17:38 -0400)]
drm/radeon/dpm: fix compilation with certain versions of gcc
Add #include <linux/seq_file.h> to *_dpm.c files
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jul 2013 13:11:39 +0000 (09:11 -0400)]
drm/radeon/dpm: clarify debugfs warning
For chips without debugfs dpm support say that it's not
implemented rather than not supported to avoid confusion
about DPM support in general.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Tue, 2 Jul 2013 08:48:31 +0000 (10:48 +0200)]
drm/i915: Don't try to tear down the stolen drm_mm if it's not there
Every other place properly checks whether we've managed to set
up the stolen allocator at boot-up properly, with the exception
of the cleanup code. Which results in an ugly
*ERROR* Memory manager not clean. Delaying takedown
at module unload time since the drm_mm isn't initialized at all.
v2: While at it check whether the stolen drm_mm is initialized instead
of the more obscure stolen_base == 0 check.
v3: Fix up the logic. Also we need to keep the stolen_base check in
i915_gem_object_create_stolen_for_preallocated since that can be
called before stolen memory is fully set up. Spotted by Chris Wilson.
v4: Readd the conversion in i915_gem_object_create_stolen_for_preallocated,
the check is for the dev_priv->mm.gtt_space drm_mm, the stolen
allocatot must already be initialized when calling that function (if
we indeed have stolen memory).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65953
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: lu hua <huax.lu@intel.com> (v3)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
David Herrmann [Mon, 1 Jul 2013 18:32:58 +0000 (20:32 +0200)]
drm: make drm_mm_init() return void
There is no reason to return "int" as this function never fails.
Furthermore, several drivers (ast, sis) already depend on this.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Jul 2013 03:31:26 +0000 (13:31 +1000)]
Merge branch 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more patches for 3.11:
- add debugfs interface to check current DPM state
- Fix a bug that caused problems with DPM on BTC+ asics.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: add debugfs support for SI
drm/radeon/dpm: add debugfs support for cayman
drm/radeon/dpm: add debugfs support for TN
drm/radeon/dpm: add debugfs support for ON/LN
drm/radeon/dpm: add debugfs support for 7xx/evergreen/btc
drm/radeon/dpm: add debugfs support for rv6xx
drm/radeon/dpm: add infrastructure to support debugfs info
drm/radeon/dpm: re-enable state transitions for Cayman
drm/radeon/dpm: re-enable state transitions for BTC
drm/radeon: fix typo in radeon_atom_init_mc_reg_table()
drm/radeon/atom: fix endian bug in radeon_atom_init_mc_reg_table()
drm/radeon: remove sumo dpm/uvd bringup leftovers
Alex Deucher [Fri, 28 Jun 2013 22:02:19 +0000 (18:02 -0400)]
drm/radeon/dpm: add debugfs support for SI
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 21:49:02 +0000 (17:49 -0400)]
drm/radeon/dpm: add debugfs support for cayman
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 16:01:38 +0000 (12:01 -0400)]
drm/radeon/dpm: add debugfs support for TN
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 14:47:56 +0000 (10:47 -0400)]
drm/radeon/dpm: add debugfs support for ON/LN
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 14:06:26 +0000 (10:06 -0400)]
drm/radeon/dpm: add debugfs support for 7xx/evergreen/btc
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 18:20:53 +0000 (14:20 -0400)]
drm/radeon/dpm: add debugfs support for rv6xx
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 13:28:39 +0000 (09:28 -0400)]
drm/radeon/dpm: add infrastructure to support debugfs info
This lays the frameworks to report realtime power level
feedback.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 1 Jul 2013 20:07:18 +0000 (16:07 -0400)]
drm/radeon/dpm: re-enable state transitions for Cayman
Was disabled due to stability issues on certain boards
caused by the a bug in the parsing of the atom mc reg tables.
That's fixed now so re-enable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / openwrt / staging / blogic.git / log