[SCSI] Add Brownie to blacklist

This device spews total rubbish to a REPORT LUNS command, so avoid
sending it one.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[PATCH] reiserfs: do not check if unsigned < 0

This patch fixes bugs in reiserfs where unsigned integers were checked
whether they are less then 0.

Signed-off-by: Vladimir V. Saveliev <vs@namesys.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Hans Reiser <reiser@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] numa_maps: Fix potential crash on non IA64 platforms

numa_maps should not scan over huge vmas in order not to cause problems for
non IA64 platforms that may have pte entries pointing to huge pages in a
variety of ways in their page tables.  Add a simple check to ignore vmas
containing huge pages.

Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] time_interpolator: Use readq_relaxed() instead of readq().

On some platforms readq performs additional work to make sure I/O is done
in a coherent way.  This is not needed for time retrieval as done by the
time interpolator.  So we can use readq_relaxed instead which will improve
performance.

It affects sparc64 and ia64 only.  Apparently it makes a significant
difference on ia64.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix acpi_video_flags on x86-64

acpi_video_flags variable is unsigned long, so it should be set as such.
This actually matters on x86-64.

Signed-off-by: Stefan Seyfried <seife@suse.de>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: simplify fid mapping

v9fs has been plagued by an over-complicated approach trying to map Linux
dentry semantics to Plan 9 fid semantics.  Our previous approach called for
aggressive flushing of the dcache resulting in several problems (including
wierd cwd behavior when running /bin/pwd).

This patch dramatically simplifies our handling of this fid management.  Fids
will not be clunked as promptly, but the new approach is more functionally
correct.  We now clunk un-open fids only when their dentry ref_count reaches 0
(and d_delete is called).

Another simplification is we no longer seek to match fids to the process-id or
uid of the action initiator.  The uid-matching will need to be revisited when
we fix the security model.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix bug in atomic create open fix

Lucho's atomic create+open fix had a bug in the super block initialization
causing all mounts to fail.  He was freeing an fcall too early.  This patch
fixes that oversight.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix atomic create open

In order to assure atomic create+open v9fs stores the open fid produced by
v9fs_vfs_create in the dentry, from where v9fs_file_open retrieves it and
associates it with the open file.

This patch modifies v9fs to use nameidata.intent.open values to do the atomic
create+open.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] "drivers/mtd/redboot.c: recognise a foreign byte sex partition table" update

Sync up the recent redboot fix with MTD CVS.  It uses the correct swab()
functions.

Cc: John Bowler <jbowler@acm.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] out_of_memory() locking fix

I seem to have lost this read_unlock().

While we're there, let's turn that interruptible sleep unto uninterruptible,
so we don't get a busywait if signal_pending().  (Again.  We seem to have a
habit of doing this).

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2

Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

Merge git://git./linux/kernel/git/brodo/pcmcia-fixes-2.6

[PATCH] fix build breakage in eeh.c in 2.6.16-rc5-git5

This patch should fixe a problem with eeh_add_device_late() not being
defined in the ppc64 build process, causing the build to break.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ocfs2: use hlists for lockres hash

Switch from list_head to hlist_head. Make the size of the hash dependent
upon the allocated area, rather than a constant.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] ocfs2: added source addr to bind() in o2net_start_connect()

to prevent confusion when a virtual ip is created on the same interface

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: Respond to on-disk corruption in the extent map code.

The extent map code has long noticed when the on-disk extent information
is corrupt.  However, so far it has only returned an error.  We should
take the filesystem read-only, as it is corrupt.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: Set .owner on masklog sysfs attributes.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] ocfs2: fix orphan recovery deadlock

Orphan dir recovery can deadlock with another process in
ocfs2_delete_inode() in some corner cases. Fix this by tracking recovery
state more closely and allowing it to handle inode wipes which might
deadlock.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] ocfs2: complete failure recovery for nodemanager init

 This patch finishes cleaning up the node manager allocations if it fails
 to initialize.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[MIPS] Use USECS_PER_SEC / HZ instead of tick_usec in do_gettimeofday.

The 'tick_usec' is USER_HZ period in usec.  do_gettimeofday() should
use kernel HZ value.

Here is a patch for MIPS.  It seems m32r, m68k and sparc have same
problem though their HZ and USER_HZ are same for now.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[PATCH] ocfs2: remove non existing function prototypes

Remove some prototypes from tcp.h for functions which have long been gone.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] ocfs2: remove unused code

Remove some #ifdef'd out code which was inadvertantly introduced in our
initial merge.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] ocfs2: remove pointless max journal size limit

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] ocfs2: fix -Wformat warnings when building UML on x86-64

 The check to determine which format string is appopriate for u64 and
 friends works in most cases, but UML on x86_64 doesn't define CONFIG_X86_64,
 so it results in screen fulls of compile-time warnings.

 This patch fixes it to handle that case.

 fs/ocfs2/cluster/masklog.h |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6

[PATCH] pcmcia: CM4000, CM4040 Driver fixes

Using this patch, Omnikey CardMan 4000 and 4040 devices automatically
get their device nodes created by udev.

Also, we now check for (and handle) failure of pcmcia_register_driver()

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

[PATCH] pcmcia: add id for AMB8110 PC Card

The axnet_cs driver can support the AMB8110 PC Card, so add the id for it.

In the old pcmcia-cs config file, this card is listed with the comment "not
specific enough".  The last entry in the axnet_ids has the same comment.
They are disabled, and for good reason as it was originally identified by
the MANFID, and that is shared with several cards that use both the
pcnet_cs driver and axnet_cs driver.  I tried my AMB8110 with pcnet_cs, and
found that it works fine, and I cannot find a reason for either, except
that the old config file recommended axnet_cs.

Signed-off-by: Jesse Allen <the3dfxdude@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

[PATCH] pcmcia: avoid binding hostap_cs to Orinoco cards

Don't just use cards with PCMCIA ID 0x0156, 0x0002.  Make sure that the
vendor string is "Intersil" or "INTERSIL"

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

[PATCH] pcmcia: Add macro to match PCMCIA cards by numeric ID and first vendor string

This is needed to distinguish Intersil and non-Intersil cards with
numeric ID 0x0156, 0x0002.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

[PATCH] pcmcia: add another ide-cs CF card id

Add another CF card ID.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

[PATCH] pcmcia: properly handle pseudo multi-function devices

The second pseudo multi-function device of a PCMCIA card may only be
configured once the first one is initialized. Therefore, delay the
registration of the second device until the first one is initialized.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net

Merge branch 'e1000' of ssh://198.78.49.142/srv/git/intel/linux-2.6

Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

[PATCH] synclink_gt: make ->init_error signed

Examples of misuse are

3112 info->init_error = -1;

4440 if ((info->init_error = register_test(info)) < 0) {

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] out_of_memory(): use of uninitialised

Under some circumstances `points' can get printed before it's initialised.
Spotted by Carlos Martin <carlos@cmartin.tk>.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add mm->task_size and fix powerpc vdso

This patch adds mm->task_size to keep track of the task size of a given mm
and uses that to fix the powerpc vdso so that it uses the mm task size to
decide what pages to fault in instead of the current thread flags (which
broke when ptracing).

(akpm: I expect that mm_struct.task_size will become the way in which we
finally sort out the confusion between 32-bit processes and 32-bit mm's.  It
may need tweaks, but at this stage this patch is powerpc-only.)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nommu: implement vmalloc_node()

Fix oprofile linkage.   Pointed out by "Luke Yang" <luke.adi@gmail.com>.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] remove_from_swap: fix locking

remove_from_swap() currently attempts to use page_lock_anon_vma to obtain
an anon_vma lock.  That is not working since the page may have been
remapped via swap ptes in order to move the page.

However, do_migrate_pages() obtain the mmap_sem lock and therefore there is
a guarantee that the anonymous vma will not vanish from under us.  There is
therefore no need to use page_lock_anon_vma.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tty buffering: comment out debug code

Comment out debug code in tty receive buffering.  For performance reasons
(I'll keep it enabled in -mm).

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] video1394: fix "return E;" typo

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pnp bus type fix

This is Adam's pnp probing fix.  It's been reported to fix hangs on several
people's machines.  I don't know if it's official or final, and Adam isn't
contactable at present.  But I'm not aware of the patch causing any
regressions.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Altix: more ioc3 cleanups and locking fixes

Some "inline" removing that Andrew suggested, removed some locking on
add/remove at this level - we'll let the callees decide.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/mtd/redboot.c: recognise a foreign byte sex partition table

The RedBoot boot loader writes flash partition tables containing native
byte sex 32 bit values.  When booting an opposite byte sex kernel (e.g.  an
LE kernel from BE RedBoot) the current MTD driver fails to handle the
partition table and therefore is unable to generate the correct partition
map for the flash.

So far as I am aware this problem is ARM specific, because only ARM
supports software change of the CPU (memory system) byte sex, however the
partition table parsing is in generic MTD code.  The patch below has been
tested on NSLU2 (an IXP4XX based system) with a patch,
10-ixp4xx-copy-from.patch (submitted to linux-arm-kernel - it's ARM
specific) required to make the maps/ixp4xx.c driver work with an LE kernel.

Builds of the patched system are in the 'unstable' release of OpenSlug and
UcSlugC available from www.nslu2-linux.org.  These builds are BE, the
archives at www.nslu2-linux.org and www.handhelds.org (see
monotone.vanille.de) can be built LE (currently DISTRO targets
nslu-ltu.conf for LE thumb uclibc (32 bit kernel) and nslu2-lau.conf,
nslu2-lag.conf for LE arm uclibc/glibc) and this patch has been tested
extensively will both BE and LE systems on the NSLU2 (including swapping
between BE and LE by reflashing from both RedBoot and Linux).

The patch recognises that the FIS directory (the partition table) is
byte-reversed by examining the partition table size, which is known to be
one erase block (this is an assumption made elsewhere in redboot.c).  If
the size matches the erase block after byte swapping the value then
byte-reversal is assumed, if not no further action is taken.  The patched
code is fail safe; should redboot.c be changed to support a partition table
with a modified size field the test will fail and the partition table will
be assumed to have the host byte sex.

If byte-reversal is detected the patch byte swaps the remainder of the 32
bit fields in the copy of the table; this copy is then used to set up the
MTD partition map.

Signed-off-by: John Bowler <jbowler@acm.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: fix bug in negative lookup

If negative entries (nodeid == 0) were sent in reply to LOOKUP requests,
two bugs could be triggered:

- looking up a negative entry would return -EIO,

- revaildate on an entry which turned negative would send a FORGET
  request with zero nodeid, which would cause an abort() in the
  library.

The above would only happen if the 'negative_timeout=N' option was used,
otherwise lookups reply -ENOENT, which worked correctly.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix sys_migrate_pages: Move all pages when invoked from root

Currently sys_migrate_pages only moves pages belonging to a process.  This
is okay when invoked from a regular user.  But if invoked from root it
should move all pages as documented in the migrate_pages manpage.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86 microcode driver vs hotplug CPUs.

This driver loops over 'num_online_cpus', but it doesn't account for holes
in the online map created by offlined cpus, and assumes that the cpu
numbers stay linear.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] e1000: revert to single descriptor for legacy receive path

A recent patch attempted to enable more efficient memory usage by using
only 2kB descriptors for jumbo frames.  The method used to implement this
has since been commented upon as "illegal" and in recent kernels even
causes a BUG when receiving ip fragments while using jumbo frames.
This patch simply goes back to the way things were.  We expect some
complaints due to order 3 allocations failing to come back due to this
change.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

[PATCH] sky2: remove MSI support

Remove Message Signaled Interrupt support (for 2.6.16).
MSI is inherently edge-triggered and that is incompatiable (without more
work) with NAPI.

In future, will replace with smarter lockless-IRQ handling like
tg3.c

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6

Merge branch 'for-jeff' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6

Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

[PATCH] USB: ftdi_sio: new microHAM device IDs

This patch adds a bunch of new device IDs to the ftdi_sio driver for
various devices from microHAM using FTDI chips.

Micheal Studer supplied the PID for the USB-Y9 device.  I examined the
INF file in microHAM's Windows driver package for the USB-KW, USB-YS,
USB-IC, USB-DB9 and USB-RS232 devices.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: visor.c id for gspda smartphone

Added the USB vendorID of GSPDA and the productID of GSPDA's palm
smartphone 'xplore m68' to the list of known devices.

Signed-off-by: Hendrik Schweppe <linuxkpatch@hendrik.fam-schweppe.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: Gadget RNDIS fix alloc bug. (buffer overflow)

Remote NDIS response to OID_GEN_SUPPORTED_LIST only allocated space
for the data attached to the reply, and not the reply structure
itself. This caused other kmalloc'd memory to be corrupted.

Signed-off-by: Shaun Tancheff <shaun@tancheff.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: lh7a40x gadget driver: Fixed a dead lock

There is a dead lock in lh7a40x udc driver. When the driver receive a
SET_FEATURE HALT request, the dev lock is taken by the interrupt
handler lh7a40x_udc_irq then the handler will call lh7a40x_set_halt
function which in its turn will try to acquire the dev lock.

Signed-off-by: Franck Bui-Huu <franck.bui-huu@innova-card.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: unusual_devs entry for Lyra RCA RD1080

This patch (as656) adds an unusual_devs.h entry for the Lyra RCA RD1080
MP3 player.  Its card-reader firmware has the common
report-one-too-many-sectors bug.  This fixes Novell bug #152175.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: Wisegroup MP-8866 Dual USB Joypad

This patch is for the Dual USB Joypad [0925:8866] from Wisegroup.  The
HID_QUIRK_NOGET is necessary for it to respond to input, and the
HID_QUIRK_MULTI_INPUT is necessary to have two js# nodes appear.

Signed-off-by: Andrew Fuller <mactalla.obair@gmail.com>
Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: fix EHCI BIOS handshake

Fix http://bugzilla.kernel.org/show_bug.cgi?id=6128

Finish morphing the "early handoff" version of the EHCI BIOS handshake over
to match the previous implementation inside the EHCI driver (except that
now we forcibly disable the SMI).  The version that had been with the PCI
code was surprisingly full of bugs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <yazar256@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[SUNSU]: Fix locking error in sunsu_stop_rx().

The caller takes the UART port lock, so we shouldn't try
to take it again.

Signed-off-by: David S. Miller <davem@davemloft.net>

[IA64] sysctl option to silence unaligned trap warnings

Allow sysadmin to disable all warnings about userland apps
making unaligned accesses by using:
 # echo 1 > /proc/sys/kernel/ignore-unaligned-usertrap
Rather than having to use prctl on a process by process basis.

Default behaivour leaves the warnings enabled.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[SCSI] aha152x: fix variable use before initialisation and other bugs

- change interface of the reset functions from Scsi_Cmnd to Scsi_Host.
- add functions with the original interface and rename the new
  functions to reflect the new interface.
- call these from the pcmcia driver, thereby avoiding the need to
  construct a (broken) Scsi_Cmnd from a Scsi_Host.
- just run the bh if the interrupt is from the controller and if so
  ensure that it's only called once per interrupt.

Signed-off-by: Juergen E. Fischer <fischer@linux-buechse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

[MIPS] Fix build error on processors that don's support copy-on-write.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Initialize S-cache function pointers even on S-cache-less CPUs.

When a CPU has no scache, the scache flushing functions currently
aren't getting initialized and the NULL pointer is eventually called
as a function.  Initialize the scache flushing functions as a noop
when there's no scache.

Initial patch by me and most of the debugging done by Martin Michlmayr.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[IA64] cleanup in fsys.S

beautify coding style for zeroing end of fsyscall_table entries.
Remove misleading __NR_syscall_last and add more comments.
Drop (now unneeded) "guard against failure to increase NR_syscalls"

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge git://git./linux/kernel/git/paulus/powerpc-merge

[SCSI] Fix uninitialised width and speed in sym2

sym2 boards without NVRAM currently negotiate narrow due to this missed
initialisation

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] Delete duplicate driver template.

Stuborn as compilers are they don't like duplicate definitions.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[PATCH] cfq-iosched: slice expiry fixups

During testing of SLES10, we encountered a hang in the CFQ io scheduler.
Turns out the deferred slice expiry logic is buggy, so remove that for
now.  We could be left with an idle queue that would never wake up.  So
kill that logic, always expire immediately.  Also fix a potential timer
race condition.

Patch looks bigger than it is, because it moves a function.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] powerpc/iseries: Fix double phys_to_abs bug in htab_bolt_mapping

Before the merge I updated create_pte_mapping() to work for iSeries, by
calling iSeries_hpte_bolt_or_insert. (4c55130b2aa93370f1bf52d2304394e91cf8ee39)

Later we changed iSeries_hpte_insert to cope with the bolting case, and called
that instead from create_pte_mapping() (which was renamed to htab_bolt_mapping)
(3c726f8dee6f55e96475574e9f645327e461884c).

Unfortunately that change introduced a subtle bug, where we pass an absolute
address to iSeries_hpte_insert() where it expects a physical address. This
leads to us calling phys_to_abs() twice on the physical address, which is
seriously bogus.

This only causes a problem if the absolute address from the first translation
can be looked up again in the chunk_map, which depends on the size and layout
of memory. I've seen it fail on one box, but not others.

The minimal fix is to pass the physical address to iSeries_hpte_insert(). For
2.6.17 we should make phys_to_abs() BUG if we try to double-translate an
address.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: fix NULL pointer in handle_eeh_events

This patch fixes a crash in handle_eeh_events,
but ethtool -t still doesnt work right.

...
pepino:~ # cpu 0x3: Vector: 300 (Data Access) at [c00000005192bbe0]
    pc: c00000000004a380: .handle_eeh_events+0xe0/0x23c
    lr: c00000000004a374: .handle_eeh_events+0xd4/0x23c
    sp: c00000005192be60
   msr: 9000000000009032
   dar: 268
 dsisr: 40000000
  current = 0xc0000001fe7bf1a0
  paca    = 0xc00000000048b280
    pid   = 16322, comm = eehd
enter ? for help
[c00000005192bf00] c00000000004a808 .eeh_event_handler+0xcc/0x130
[c00000005192bf90] c000000000025e00 .kernel_thread+0x4c/0x68

...

(none):/# /usr/sbin/ethtool -i eth0
driver: e100
version: 3.5.10-k2-NAPI
firmware-version: N/A
bus-info: 0000:21:01.0
(none):/# /usr/sbin/ethtool -t eth0
Call Trace:
[C00000000F8DEFF0] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000F8DF0A0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000F8DF150] [C000000000049E58] .eeh_check_failure+0x10c/0x138
[C00000000F8DF1E0] [C0000000002DFDB0] .e100_hw_reset+0x70/0xf4
[C00000000F8DF270] [C0000000002E1BBC] .e100_hw_init+0x2c/0x260
[C00000000F8DF310] [C0000000002E2464] .e100_loopback_test+0x8c/0x220
[C00000000F8DF3C0] [C0000000002E28DC] .e100_diag_test+0xdc/0x16c
[C00000000F8DF490] [C000000000420BE0] .dev_ethtool+0xf24/0x14f8
[C00000000F8DF8F0] [C00000000041F4A8] .dev_ioctl+0x5cc/0x740
[C00000000F8DFA20] [C00000000040FEFC] .sock_ioctl+0x3d0/0x404
[C00000000F8DFAC0] [C0000000000D513C] .do_ioctl+0x68/0x108
[C00000000F8DFB50] [C0000000000D56B0] .vfs_ioctl+0x4d4/0x510
[C00000000F8DFC10] [C0000000000D5740] .sys_ioctl+0x54/0x94
[C00000000F8DFCC0] [C0000000000FB6EC] .ethtool_ioctl+0x11c/0x150
[C00000000F8DFD60] [C0000000000F7E40] .compat_sys_ioctl+0x338/0x3bc
[C00000000F8DFE30] [C00000000000871C] syscall_exit+0x0/0x40
EEH: Detected PCI bus error on device 0000:21:01.0
EEH: This PCI device has failed 1 times since last reboot: <NULL> -

modprobe: FATAL: Could not load /lib/modules/2.6.16-rc4-git7/modules.dep: No such file or directory

Cannot get strings: No such device
(none):/#
(none):/# EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2

(none):/# Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
EEH: This PCI device has failed 1 times since last reboot: <NULL> -
EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2
Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
EEH: This PCI device has failed 1 times since last reboot: <NULL> -
EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2
Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
and so on

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: vdso 64bits gettimeofday bug

A bug in the assembly code of the vdso can cause gettimeofday() to hang
or to return incorrect results. The wrong register was used to test for
pending updates of the calibration variables and to create a dependency
for subsequent loads. This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: fix dynamic PCI probe regression

Some hotplug driver functions were migrated to the kernel for use by EEH
in commit 2bf6a8fa21570f37fd1789610da30f70a05ac5e3.

Previously, the PCI Hotplug module had been changed to use the new
OFDT-based PCI probe when appropriate:
5fa80fcdca9d20d30c9ecec30d4dbff4ed93a5c6

When rpaphp_pci_config_slot() was moved from the rpaphp driver to the
new kernel function pcibios_add_pci_devices(), the OFDT-based probe
stuff was dropped.  This patch restores it.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/libata-dev

Revert "[PATCH] x86_64: Only do the clustered systems have unsynchronized TSC assumption on IBM systems"

This reverts commit 13a229abc25640813f1480c0478dfc6bdbc1c19e.

Quoth Andi:
  "After some consideration and feedback from various people it turns
   out this wasn't that good an idea.  It has some problems and needs
   more work.  Since it was only an optimization anyways it's best to
   just back it out again for now."

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[SCSI] scsi: scsi command retries off by one fix

Fix up an off by one error in calculating retries for scsi
commands. This bug was discovered when an SG_IO request
was sent to scsi core with retries = 0, causing the overall
timeout check to go off in scsi_softirq_done.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] megaraid_sas: fix physical disk handling

This patch hides the devices completely from the midlayer instead.
It requires the patch to handle the slave_configure failure I posted
earlier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[libata] Disable FUA

Until problems are sorted.

[SCSI] scsi: handle ->slave_configure return value

When ­>slave_configure fails the scsi midlayer should handle it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fc_transport: stop creating duplicate rport entries.

Current fc_transport consumers initially register rports
with an UNKNOWN role-state and follow-up with a call to
fc_remote_port_rolechg().  Modify code in
fc_remote_port_add() to scan the fc_host_rport_bindings()
array for consistent bindings regardless of role-type.
Original code would only scan bindings array for targets,
causing duplicate fc_remote_ports/rport-X:Y-Z entries to be
created for the yet-to-be-role-changed rports.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] sg: Remove aha1542 hack

Remove a hack in the sg driver that alters the total buffer
length for SG_IO commands to ensure buffers are not odd byte
lengths. This breaks on the ipr driver since it requires the
request_bufflen to equal the length specified in the cdb.
The block layer SG_IO code does not appear to have this hack.

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Merge git://oss.sgi.com:8090/oss/git/xfs-rc-fixes

[XFS] Don't map non-uptodate buffers in xfs_probe_cluster; also fixes
obscure corruption case

SGI-PV: 942658
SGI-Modid: xfs-linux-melb:xfs-kern:207119a

Signed-off-by: Eric Sandeen <sandeen@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] Reduce stack use during quota mounts (caused a panic).  This
regressed recently via the fix for inherited quota inode attributes.

SGI-PV: 947312
SGI-Modid: xfs-linux-melb:xfs-kern:25318a

Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] Fix a realtime allocator regression introduced by an old iget race
fix.  Noticed by Roger Willcocks.

SGI-PV: 949821
SGI-Modid: xfs-linux-melb:xfs-kern:25257a

Signed-off-by: Nathan Scott <nathans@sgi.com>

[PATCH] ieee80211_rx.c: is_beacon

Fix broken is_beacon().

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[IA64] refresh default config files

Bring all ia64 config files up to date

Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] die_if_kernel() can return

arch/ia64/kernel/unaligned.c erroneously marked die_if_kernel()
with a "noreturn" attribute ... which is silly (it returns whenever
the argument regs say that the fault happened in user mode, as one
might expect given the "if_kernel" part of its name!).  Thanks to
Alan and Gareth for pointing this out.

Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64-SGI] revert export sn_pcidev_info_get

Christoph Hellwig <hch@infradead.org> pointed that there are no
in-tree uses of this.  So revert 9c65cb9be62ac4993a5b392304b82e4f04f010fd

Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Fix pcibios_setup

pcibios_setup() should return NULL if it handled a parameter.  Since ia64
handles no parameters, it should return the string that was passed in,
not NULL.  This brings ia64 into line with all other architectures that
handle no parameters.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64-SGI] Make number of TIO nodes configurable

Make the limit for the number of TIO nodes a function of the number
of C/M nodes in the system instead of a hardcoded constant.  The
number of TIO nodes should be the same as the number of C/M nodes.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Document the "nomca" boot parameter

"nomca" can be used to disable machine check handling

Signed-Off-By: Horms <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

[IA64] Delete a redundant instruction in unaligned_access

unaligned_access does fetch cr.ipsr, then calls
dispatch_unaligned_handler, but dispatch_unaligned_handler fetches
cr.ipsr again, so delete the first one.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] show "SN Devices" menu only if CONFIG_SGI_SN

Adrian> On architectures like i386, the "Multimedia Capabilities Port
Adrian> drivers" menu is visible, but it can't be visited since it
Adrian> contains nothing usable for CONFIG_SGI_SN=n.

Jes> Thats only a third of the patch, if you want to do that, you should
Jes> remove the redundant SGI_SN checks below.

Signed-off-by: Tony Luck <tony.luck@intel.com>

8139cp: fix broken suspend/resume

- check that the device is up before it is enabled again;
- the descriptor ring indexes must be set to zero before
  cp_init_hw() is issued. Add a nice comment to remember
  that skb allocation failure is still not handled.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=5681

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

via-velocity: fix memory corruption when changing the mtu

velocity_rx_refill() only replenishes the descriptor entries which
belong to the CPU. It works great in the Rx path but the driver must
ensure that all the descriptors are freed before velocity_rx_refill()
is used in velocity_change_mtu(). The patch resets the Rx descriptors
in velocity_free_rd_ring().

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

[REQSK]: Don't reset rskq_defer_accept in reqsk_queue_alloc

In 295f7324ff8d9ea58b4d3ec93b1aaa1d80e048a9 I moved defer_accept from
tcp_sock to request_queue and mistakingly reset it at reqsl_queue_alloc, causing
calls to setsockopt(TCP_DEFER_ACCEPT ) to be lost after bind, the fix is to
remove the zeroing of rskq_defer_accept from reqsl_queue_alloc.

Thanks to Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru> for
reporting and testing the suggested fix.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>