openwrt/staging/blogic.git
9 years agoBluetooth: Fix conn_params list update in hci_connect_le_scan_cleanup
Johan Hedberg [Fri, 16 Oct 2015 07:07:53 +0000 (10:07 +0300)]
Bluetooth: Fix conn_params list update in hci_connect_le_scan_cleanup

After clearing the params->explicit_connect variable the parameters
may need to be either added back to the right list or potentially left
absent from both the le_reports and the le_conns lists.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
9 years agoBluetooth: Fix remove_device behavior for explicit connects
Johan Hedberg [Fri, 16 Oct 2015 07:07:52 +0000 (10:07 +0300)]
Bluetooth: Fix remove_device behavior for explicit connects

Devices undergoing an explicit connect should not have their
conn_params struct removed by the mgmt Remove Device command. This
patch fixes the necessary checks in the command handler to correct the
behavior.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
9 years agoBluetooth: Fix LE reconnection logic
Johan Hedberg [Fri, 16 Oct 2015 07:07:51 +0000 (10:07 +0300)]
Bluetooth: Fix LE reconnection logic

We can't use hci_explicit_connect_lookup() since that would only cover
explicit connections, leaving normal reconnections completely
untouched. Not using it in turn means leaving out entries in
pend_le_reports.

To fix this and simplify the logic move conn params from the reports
list to the pend_le_conns list for the duration of an explicit
connect. Once the connect is complete move the params back to the
pend_le_reports list. This also means that the explicit connect lookup
function only needs to look into the pend_le_conns list.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
9 years agoBluetooth: Fix reference counting for LE-scan based connections
Johan Hedberg [Fri, 16 Oct 2015 07:07:50 +0000 (10:07 +0300)]
Bluetooth: Fix reference counting for LE-scan based connections

The code should never directly call hci_conn_hash_del since many
cleanup & reference counting updates would be lost. Normally
hci_conn_del is the right thing to do, but in the case of a connection
doing LE scanning this could cause a deadlock due to doing a
cancel_delayed_work_sync() on the same work callback that we were
called from.

Connections in the LE scanning state actually need very little cleanup
- just a small subset of hci_conn_del. To solve the issue, refactor
out these essential pieces into a new hci_conn_cleanup() function and
call that from the two necessary places.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
9 years agoBluetooth: Fix double scan updates
Jakub Pawlowski [Fri, 16 Oct 2015 07:07:49 +0000 (10:07 +0300)]
Bluetooth: Fix double scan updates

When disable/enable scan command is issued twice, some controllers
will return an error for the second request, i.e. requests with this
command will fail on some controllers, and succeed on others.

This patch makes sure that unnecessary scan disable/enable commands
are not issued.

When adding device to the auto connect whitelist when there is pending
connect attempt, there is no need to update scan.

hci_connect_le_scan_cleanup is conditionally executing
hci_conn_params_del, that is calling hci_update_background_scan. Make
the other case also update scan, and remove reduntand call from
hci_connect_le_scan_remove.

When stopping interleaved discovery the state should be set to stopped
only when both LE scanning and discovery has stopped.

Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
9 years agomlxsw: core: Fix race condition in __mlxsw_emad_transmit
Ido Schimmel [Thu, 15 Oct 2015 06:21:55 +0000 (08:21 +0200)]
mlxsw: core: Fix race condition in __mlxsw_emad_transmit

Under certain conditions EMAD responses can be returned from the device
even before setting trans_active. This will cause the EMAD Rx listener
to drop the EMAD response - as there are no active transactions - and
timeouts will be generated.

Fix this by setting trans_active before transmitting the EMAD skb.

Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotipc: move fragment importance field to new header position
Jon Paul Maloy [Wed, 14 Oct 2015 13:23:18 +0000 (09:23 -0400)]
tipc: move fragment importance field to new header position

In commit e3eea1eb47a ("tipc: clean up handling of message priorities")
we introduced a field in the packet header for keeping track of the
priority of fragments, since this value is not present in the specified
protocol header. Since the value so far only is used at the transmitting
end of the link, we have not yet officially defined it as part of the
protocol.

Unfortunately, the field we use for keeping this value, bits 13-15 in
in word 5, has turned out to be a poor choice; it is already used by the
broadcast protocol for carrying the 'network id' field of the sending
node. Since packet fragments also need to be transported across the
broadcast protocol, the risk of conflict is obvious, and we see this
happen when we use network identities larger than 2^13-1. This has
escaped our testing because we have so far only been using small network
id values.

We now move this field to bits 0-2 in word 9, a field that is guaranteed
to be unused by all involved protocols.

Fixes: e3eea1eb47a ("tipc: clean up handling of message priorities")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoethtool: Use kcalloc instead of kmalloc for ethtool_get_strings
Joe Perches [Wed, 14 Oct 2015 08:09:40 +0000 (01:09 -0700)]
ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings

It seems that kernel memory can leak into userspace by a
kmalloc, ethtool_get_strings, then copy_to_user sequence.

Avoid this by using kcalloc to zero fill the copied buffer.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'mac80211-for-davem-2015-10-13' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Thu, 15 Oct 2015 01:34:25 +0000 (18:34 -0700)]
Merge tag 'mac80211-for-davem-2015-10-13' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Like last time, we have two small fixes:
 * fast-xmit was not doing powersave filter clearing correctly,
   disable fast-xmit while any such operations are still pending
 * a debugfs file was broken due to some infrastructure changes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotipc: eliminate risk of stalled link synchronization
Jon Paul Maloy [Tue, 13 Oct 2015 16:41:51 +0000 (12:41 -0400)]
tipc: eliminate risk of stalled link synchronization

In commit 6e498158a827 ("tipc: move link synch and failover to link aggregation level")
we introduced a new mechanism for performing link failover and
synchronization. We have now detected a bug in this mechanism.

During link synchronization we use the arrival of any packet on
the tunnel link to trig a check for whether it has reached the
synchronization point or not. This has turned out to be too
permissive, since it may cause an arriving non-last SYNCH packet to
end the synch state, just to see the next SYNCH packet initiate a
new synch state with a new, higher synch point. This is not fatal,
but should be avoided, because it may significantly extend the
synchronization period, while at the same time we are not allowed
to send NACKs if packets are lost. In the worst case, a low-traffic
user may see its traffic stall until a LINK_PROTOCOL state message
trigs the link to leave synchronization state.

At the same time, LINK_PROTOCOL packets which happen to have a (non-
valid) sequence number lower than the tunnel link's rcv_nxt value will
be consistently dropped, and will never be able to resolve the situation
described above.

We fix this by exempting LINK_PROTOCOL packets from the sequence number
check, as they should be. We also reduce (but don't completely
eliminate) the risk of entering multiple synchronization states by only
allowing the (logically) first SYNCH packet to initiate a synchronization
state. This works independently of actual packet arrival order.

Fixes: commit 6e498158a827 ("tipc: move link synch and failover to link aggregation level")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv6: Don't call with rt6_uncached_list_flush_dev
Eric W. Biederman [Mon, 12 Oct 2015 16:02:08 +0000 (11:02 -0500)]
ipv6: Don't call with rt6_uncached_list_flush_dev

As originally written rt6_uncached_list_flush_dev makes no sense when
called with dev == NULL as it attempts to flush all uncached routes
regardless of network namespace when dev == NULL.  Which is simply
incorrect behavior.

Furthermore at the point rt6_ifdown is called with dev == NULL no more
network devices exist in the network namespace so even if the code in
rt6_uncached_list_flush_dev were to attempt something sensible it
would be meaningless.

Therefore remove support in rt6_uncached_list_flush_dev for handling
network devices where dev == NULL, and only call rt6_uncached_list_flush_dev
 when rt6_ifdown is called with a network device.

Fixes: 8d0b94afdca8 ("ipv6: Keep track of DST_NOCACHE routes in case of iface down/unregister")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Tested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoswitchdev: check if the vlan id is in the proper vlan range
Nikolay Aleksandrov [Mon, 12 Oct 2015 12:31:01 +0000 (14:31 +0200)]
switchdev: check if the vlan id is in the proper vlan range

VLANs 0 and 4095 are reserved and shouldn't be used, add checks to
switchdev similar to the bridge. Also make sure ids above 4095 cannot
be passed either.

Fixes: 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'be2net-fixes'
David S. Miller [Tue, 13 Oct 2015 11:32:50 +0000 (04:32 -0700)]
Merge branch 'be2net-fixes'

Sathya Perla says:

====================
be2net: patch set

Patch 1 fixes a FW image compatibility check in the driver that
prevents certain FW images from being flashed on BE3 (not BE3-R)
adapters.

Patch 2 fixes a spin_lock not being released in a failure case in
be_cmd_notify_wait().

Patch 3 includes a workaround to pad packets that are only 32b long or less
to be applicabe to BE3 too. This workaround was currently applied only to
Skyhawk and Lancer chips. Such packets are causing BE3's TX path to stall
on a SR-IOV config.

Patch 4 fixes the be_cmd_get_profile_config() routine to set the pf_num
field in the cmd request. The FW requires this field to be set for it to
return the specific function's descriptors. If not set, the FW returns
the descriptors of all the functions on the device. If the first descriptor
is not what is being queried for, the driver will read wrong data.
This patch fixes this issue by using the GET_CNTL_ATTRIB cmd to query the
real pci_func_num of a function and then uses it in the GET_PROFILE_CONFIG
cmd.

Patch 5 completes an earlier fix that removed the vlan promisc capability
for VFs. The earlier fix did not update the removal of this capability from
the profile descriptor of the VF. This causes the VF driver to request this
capability when it tries to create it's interface at probe time. This could
potentailly cause the VF probe to fail if the FW enforces strict checking of
the flags based on what was provisoned by the PF.  This strict checking is
not being done by FW currently but will be fixed in a future version. This
patch fixes this issue by updating the VF's profile descriptor so that they
match the interface capability flags provisioned by the PF.

Pls consider adding these patches to the net tree. Thanks!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobe2net: remove vlan promisc capability from VF's profile descriptors
Kalesh AP [Mon, 12 Oct 2015 07:47:21 +0000 (03:47 -0400)]
be2net: remove vlan promisc capability from VF's profile descriptors

The commit 435452aa8847 ("Prevent VFs from enabling VLAN promiscuous mode")
fixed the PF driver to not include the VLAN promisc capability while
provisioning the interface for a VF. But the fix did not remove this
capability from the profile descriptor of the VF. This causes the VF
driver to request this capability when it tries to create it's interface
at probe time.  This could potentailly cause the VF probe to fail if the
FW enforces strict checking of the flags based on what was provisoned
by the PF.  This strict checking is not being done by FW currently but
will be fixed in a future version. This patch fixes this issue by updating
the VF's profile descriptor so that they match the interface capability
flags provisioned by the PF.

Fixes: 435452aa8847 ("Prevent VFs from enabling VLAN promiscuous mode")
Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobe2net: set pci_func_num while issuing GET_PROFILE_CONFIG cmd
Somnath Kotur [Mon, 12 Oct 2015 07:47:20 +0000 (03:47 -0400)]
be2net: set pci_func_num while issuing GET_PROFILE_CONFIG cmd

The FW requires the pf_num field in the cmd hdr to be set for it to return
the specific function's descriptors in the GET_PROFILE_CONFIG cmd. If not
set, the FW returns the descriptors of all the functions on the device.
If the first descriptor is not what is being queried for, the driver will
read wrong data. This patch fixes this issue by using the GET_CNTL_ATTRIB
cmd to query the real pci_func_num of a function and then uses it in the
GET_PROFILE_CONFIG cmd.

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobe2net: pad skb to meet minimum TX pkt size in BE3
Suresh Reddy [Mon, 12 Oct 2015 07:47:19 +0000 (03:47 -0400)]
be2net: pad skb to meet minimum TX pkt size in BE3

On BE3 chips in SRIOV configs, the TX path stalls when a packet less
than 32B is received from the host. A workaround to pad such packets
already exists for the Skyhawk and Lancer chips. Use the same workaround
for BE3 chips too.

Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobe2net: release mcc-lock in a failure case in be_cmd_notify_wait()
Suresh Reddy [Mon, 12 Oct 2015 07:47:18 +0000 (03:47 -0400)]
be2net: release mcc-lock in a failure case in be_cmd_notify_wait()

The mcc/mbox lock is not being released when be_cmd_copy() returns
an error.

Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobe2net: fix BE3-R FW download compatibility check
Kalesh AP [Mon, 12 Oct 2015 07:47:17 +0000 (03:47 -0400)]
be2net: fix BE3-R FW download compatibility check

In the BE3 FW image, unlike Skyhawk's, the "asic_type_rev" field doesn't
track the asic_rev of chip it is compatible with. When asic_type_rev
is 0 the image is compatible only with pre-BE3-R chips (asic_rev < 0x10).
Fix the current compatibility check to take care of this.
We hit this issue when we try to flash old BE3 images (used prior to the
release of BE3-R) on pre-BE3-R adapters.

Fixes: a6e6ff6eee12f3e ("be2net: simplify UFI compatibility checking")
Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/fsl_pq_mdio: fix computed address for the TBI register
Gerlando Falauto [Mon, 12 Oct 2015 07:18:41 +0000 (09:18 +0200)]
net/fsl_pq_mdio: fix computed address for the TBI register

commit afae5ad78b342f401c28b0bb1adb3cd494cb125a
  "net/fsl_pq_mdio: streamline probing of MDIO nodes"

added support for different types of MDIO devices:
1) Gianfar MDIO nodes that only map the MII registers
2) Gianfar MDIO nodes that map the full MDIO register set
3) eTSEC2 MDIO nodes (which map the full MDIO register set)
4) QE MDIO nodes (which map only the MII registers)

However, the implementation for types 1 and 4 would mistakenly assume
a mapping of the full MDIO register set, thereby computing the address
for the TBI register starting from the containing structure.
The TBI register would therefore be accessed at a wrong (much bigger)
address, not giving the expected result at all.
This patch restores the correct behavior we had prior to the above one.

The consequences of this bug are apparent when trying to access a PHY
with the same address as the value contained in the initial value of
the TBI register (normally 0); in that case you'll get answers from the
internal TBI device (even though MDIO/MDC pins are actually *also*
toggling on the physical bus!).
Beware that you also need to add a fake tbi node to your device tree
with an unused address.

Notice how this fix is related to commit
220669495bf8b68130a8218607147c7b74c28d2b
  "powerpc: Add TBI PHY node to first MDIO bus"

which fixed the behavior in kernel 3.3, which was later broken by the
above commit on kernel 3.7.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Cc: Timur Tabi <timur@tabi.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/fsl_pq_mdio: check TBI address for consistency with mapped range
Gerlando Falauto [Mon, 12 Oct 2015 07:18:40 +0000 (09:18 +0200)]
net/fsl_pq_mdio: check TBI address for consistency with mapped range

When configuring the MDIO subsystem it is also necessary to configure
the TBI register. Make sure the TBI is contained within the mapped
register range in order to:
a) make sure the address is computed correctly
b) make users aware that we're actually accessing that register

In case of error, print a message but continue anyway.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Cc: Timur Tabi <timur@tabi.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomac80211: Fix hwflags debugfs file format
Mohammed Shafi Shajakhan [Thu, 8 Oct 2015 13:50:14 +0000 (19:20 +0530)]
mac80211: Fix hwflags debugfs file format

Commit 30686bf7f5b3 ("mac80211: convert HW flags to unsigned long
bitmap") accidentally removed the newline delimiter from the hwflags
debugfs file. Fix this by adding back the newline between the HW flags.

Cc: stable@vger.kernel.org [4.2]
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
[fix commit log]
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agortnetlink: fix gcc -Wconversion warning
Arad, Ronen [Fri, 9 Oct 2015 17:35:47 +0000 (10:35 -0700)]
rtnetlink: fix gcc -Wconversion warning

RTA_ALIGNTO is currently define as 4. It has to be 4U to prevent warning
for RTA_ALIGN and RTA_DATA expansions when -Wconversion gcc option is
enabled.
This follows NLMSG_ALIGNTO definition in <include/uapi/linux/netlink.h>.

Signed-off-by: Ronen Arad <ronen.arad@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv6: drop frames with attached skb->sk in forwarding
Hannes Frederic Sowa [Thu, 8 Oct 2015 16:19:53 +0000 (18:19 +0200)]
ipv6: drop frames with attached skb->sk in forwarding

This is a clone of commit 2ab957492d13b ("ip_forward: Drop frames with
attached skb->sk") for ipv6.

This commit has exactly the same reasons as the above mentioned commit,
namely to prevent panics during netfilter reload or a misconfigured stack.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv6: gre: setup default multicast routes over PtP links
Hannes Frederic Sowa [Thu, 8 Oct 2015 16:19:39 +0000 (18:19 +0200)]
ipv6: gre: setup default multicast routes over PtP links

GRE point-to-point interfaces should also support ipv6 multicast. Setting
up default multicast routes on interface creation was forgotten. Add it.

Bugzilla: <https://bugzilla.kernel.org/show_bug.cgi?id=103231>
Cc: Julien Muchembled <jm@jmuchemb.eu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dumazet <ndumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobnx2x: Prevent UDP 4-tuple configurations on older adapters
Yuval Mintz [Thu, 8 Oct 2015 13:19:01 +0000 (16:19 +0300)]
bnx2x: Prevent UDP 4-tuple configurations on older adapters

Configuring 4-tuple RSS hsahing for UDP
[E.g., by using `ethtool -N <interface> rx-flow-hash udp4 sdfn']
on a 57710/57711 adapter would cause it to assert as HW does not
support such a configuration.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'mlxsw-fixes'
David S. Miller [Sun, 11 Oct 2015 12:08:14 +0000 (05:08 -0700)]
Merge branch 'mlxsw-fixes'

Jiri Pirko says:

====================
mlxsw: couple of fixes

Just a couple of small fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomlxsw: Fix bug in __mlxsw_item_bit_array_offset
Ido Schimmel [Thu, 8 Oct 2015 13:17:38 +0000 (15:17 +0200)]
mlxsw: Fix bug in __mlxsw_item_bit_array_offset

When calculating the shift needed in order to access a bit array element
in a byte, we should multiply the index by the element size and not
assume it is fixed at 2-bits.

Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomlxsw: switchx2: changing order of exit fallbacks
Elad Raz [Thu, 8 Oct 2015 13:17:37 +0000 (15:17 +0200)]
mlxsw: switchx2: changing order of exit fallbacks

Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support")
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosch_hhf: fix return value of hhf_drop()
WANG Cong [Wed, 7 Oct 2015 23:47:32 +0000 (16:47 -0700)]
sch_hhf: fix return value of hhf_drop()

Similar to commit c0afd9ce4d6a ("fq_codel: fix return value of fq_codel_drop()")
->drop() is supposed to return the number of bytes it dropped,
but hhf_drop () returns the id of the bucket where it drops
a packet from.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Terry Lam <vtlam@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'mlx'
David S. Miller [Fri, 9 Oct 2015 14:44:04 +0000 (07:44 -0700)]
Merge branch 'mlx'

Or Gerlitz says:

====================
Mellanox driver update to 4.3-rc4

Small set of fixes for net, which includes Carol's patches, a fix
from Achiad to have the right behaviour for mlx5 Eth devices w.r.t
VLANs in promiscuous mode, a good-bye patch from Ido who left Mellanox
and the 1st patch from Jiri to our NIC drivers (I love one-liners)...
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMAINTAINERS: Update mlx4_en driver entry
Ido Shamay [Thu, 8 Oct 2015 12:26:19 +0000 (15:26 +0300)]
MAINTAINERS: Update mlx4_en driver entry

Remove Ido Shamay as co-maintainer for the mlx4 Ethernet driver,
as he no longer works for Mellanox.

Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx5e: Disable VLAN filter in promiscuous mode
Achiad Shochat [Thu, 8 Oct 2015 12:26:18 +0000 (15:26 +0300)]
net/mlx5e: Disable VLAN filter in promiscuous mode

When the device was set to promiscuous mode, we didn't disable
VLAN filtering, which is wrong behaviour, fix that.

Now when the device is set to promiscuous mode RX packets
sent over any VLAN (or no VLAN tag at all) will be accepted.

Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx5: Fix typo in mlx5_query_port_pvlc
Jiri Pirko [Thu, 8 Oct 2015 12:26:17 +0000 (15:26 +0300)]
net/mlx5: Fix typo in mlx5_query_port_pvlc

We used the wrong register name for querying the PVLC register

Fixes: a124d13ef59e ('net/mlx5_core: Add more query port helpers')
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_core: Avoid failing the interrupts test
Carol L Soto [Thu, 8 Oct 2015 12:26:15 +0000 (15:26 +0300)]
net/mlx4_core: Avoid failing the interrupts test

Test interrupts fails if not all completion vectors called
request_irq. This case happens if only mlx4_en is loaded and
we have more completion vectors than rx rings.

Fixes: c66fa19c405a ('net/mlx4: Add EQ pool')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Acked-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4: Remove shared_ports variable at mlx4_enable_msi_x
Carol L Soto [Wed, 7 Oct 2015 16:31:46 +0000 (12:31 -0400)]
net/mlx4: Remove shared_ports variable at mlx4_enable_msi_x

If we get MAX_MSIX interrupts would like to have each receive ring
with his own msix interrupt line. Do not need the shared_ports
variable at mlx4_enable_msix

Fixes: 9293267a3e2a ('net/mlx4_core: Capping number of requested MSIXs to MAX_MSIX')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Acked-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: mdio-octeon: Drop obsolete Kconfig advice
Jean Delvare [Wed, 7 Oct 2015 08:26:38 +0000 (10:26 +0200)]
net: mdio-octeon: Drop obsolete Kconfig advice

"Y" was the right answer for MDIO_OCTEON when this option was only
available on CAVIUM_OCTEON_SOC. But now that the option is visible on
all (64-bit) systems, this piece of advice no longer makes sense. This
helper module is selected automatically by drivers which need it
anyway.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: a6d6786452 ("net: mdio-octeon: Modify driver to work on both ThunderX and Octeon")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sunil Goutham <sgoutham@cavium.com>
Cc: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomlxsw: fix warnings for big-endian 32-bit dma_addr_t
Arnd Bergmann [Wed, 7 Oct 2015 06:58:34 +0000 (08:58 +0200)]
mlxsw: fix warnings for big-endian 32-bit dma_addr_t

The recently added mlxsw driver produces warnings in ARM
allmodconfig:

drivers/net/ethernet/mellanox/mlxsw/pci.c: In function 'mlxsw_pci_cmd_exec':
drivers/net/ethernet/mellanox/mlxsw/pci.c:1585:59: warning: right shift count >= width of type [-Wshift-count-overflow]
linux/byteorder/big_endian.h:38:51: note: in definition of macro '__cpu_to_be32'
drivers/net/ethernet/mellanox/mlxsw/pci.c:76:2: note: in expansion of macro 'iowrite32be'

This uses upper_32_bits() to extract the bits while avoiding that warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Fixes: eda6500a987a "mlxsw: Add PCI bus implementation"
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobpf: clear sender_cpu before xmit
Alexei Starovoitov [Wed, 7 Oct 2015 03:46:07 +0000 (20:46 -0700)]
bpf: clear sender_cpu before xmit

Similar to commit c29390c6dfee ("xps: must clear sender_cpu before forwarding")
the skb->sender_cpu needs to be cleared before xmit.

Fixes: 3896d655f4d4 ("bpf: introduce bpf_clone_redirect() helper")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoact_mirred: clear sender cpu before sending to tx
WANG Cong [Wed, 7 Oct 2015 00:23:47 +0000 (17:23 -0700)]
act_mirred: clear sender cpu before sending to tx

Similar to commit c29390c6dfee ("xps: must clear sender_cpu before forwarding")
the skb->sender_cpu needs to be cleared when moving from Rx
Tx, otherwise kernel could crash.

Fixes: 2bd82484bb4c ("xps: fix xps for stacked devices")
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoaf_unix: constify the sock parameter in unix_sk()
Paul Moore [Tue, 6 Oct 2015 19:03:53 +0000 (15:03 -0400)]
af_unix: constify the sock parameter in unix_sk()

Make unix_sk() just like inet[6]_sk() by constify'ing the sock
parameter.

Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'ovs-ct-fixes'
David S. Miller [Wed, 7 Oct 2015 12:03:16 +0000 (05:03 -0700)]
Merge branch 'ovs-ct-fixes'

Joe Stringer says:

====================
OVS conntrack fixes for net

The userspace side of the Open vSwitch conntrack changes is currently
undergoing review, which has highlighted some minor bugs in the existing
conntrack implementation in the kernel, as well as pointing out some
future-proofing that can be done on the interface to reduce the need for
additional compatibility code in future.

The biggest changes here are to the userspace API for the ct_state match
field and the CT action. This series proposes to firstly extend the ct_state
match field to 32 bits, ensuring to reject any currently unsupported bits.
Secondly, rather than representing CT action flags within a 32-bit field,
simply use a netlink attribute as presence of the single flag that is
defined today. This also serves to reject unsupported ct action flag bits.

v4: Use 12-character abbreviated hashes in commit messages.
v3: Fully acked.
v2: Address minor style feedback, add acks.
v1: Initial post.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Change CT_ATTR_FLAGS to CT_ATTR_COMMIT
Joe Stringer [Tue, 6 Oct 2015 18:00:01 +0000 (11:00 -0700)]
openvswitch: Change CT_ATTR_FLAGS to CT_ATTR_COMMIT

Previously, the CT_ATTR_FLAGS attribute, when nested under the
OVS_ACTION_ATTR_CT, encoded a 32-bit bitmask of flags that modify the
semantics of the ct action. It's more extensible to just represent each
flag as a nested attribute, and this requires no additional error
checking to reject flags that aren't currently supported.

Suggested-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Extend ct_state match field to 32 bits
Joe Stringer [Tue, 6 Oct 2015 18:00:00 +0000 (11:00 -0700)]
openvswitch: Extend ct_state match field to 32 bits

The ct_state field was initially added as an 8-bit field, however six of
the bits are already being used and use cases are already starting to
appear that may push the limits of this field. This patch extends the
field to 32 bits while retaining the internal representation of 8 bits.
This should cover forward compatibility of the ABI for the foreseeable
future.

This patch also reorders the OVS_CS_F_* bits to be sequential.

Suggested-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Reject ct_state unsupported bits
Joe Stringer [Tue, 6 Oct 2015 17:59:59 +0000 (10:59 -0700)]
openvswitch: Reject ct_state unsupported bits

Previously, if userspace specified ct_state bits in the flow key which
are currently undefined (and therefore unsupported), then they would be
ignored. This could cause unexpected behaviour in future if userspace is
extended to support additional bits but attempts to communicate with the
current version of the kernel. This patch rectifies the situation by
rejecting such ct_state bits.

Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action"
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Ensure flow is valid before executing ct
Joe Stringer [Tue, 6 Oct 2015 17:59:58 +0000 (10:59 -0700)]
openvswitch: Ensure flow is valid before executing ct

The ct action uses parts of the flow key, so we need to ensure that it
is valid before executing that action.

Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action"
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Fix skb leak in ovs_fragment()
Joe Stringer [Tue, 6 Oct 2015 17:59:57 +0000 (10:59 -0700)]
openvswitch: Fix skb leak in ovs_fragment()

If ovs_fragment() was unable to fragment the skb due to an L2 header
that exceeds the supported length, skbs would be leaked. Fix the bug.

Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action"
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Fix typos in CT headers
Joe Stringer [Tue, 6 Oct 2015 17:59:56 +0000 (10:59 -0700)]
openvswitch: Fix typos in CT headers

These comments hadn't caught up to their implementations, fix them.

Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action"
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'dsa-unbind'
David S. Miller [Wed, 7 Oct 2015 11:56:12 +0000 (04:56 -0700)]
Merge branch 'dsa-unbind'

Neil Armstrong says:

====================
net: dsa: complete and fix the dsa unbinding

In order to cleanly unbind the dsa core, either as a module removal,
or a platform device unbind, switch the allocation the their devm_
counterparts and complete the destroy functions.

First, the missing kfree were added, the remove function were
completed then kfree were removed in favor to devm_ calls.

The last patch is an way to cleanly exit the probe when no
switch is found in the discover process.

The patches are based on the current net.

v3:
 - make checkpatch happy with 1/5 & 5/5
 - fix 5/5 exit path with a goto
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: exit probe if no switch were found
Neil Armstrong [Tue, 6 Oct 2015 14:40:43 +0000 (15:40 +0100)]
net: dsa: exit probe if no switch were found

If no switch were found in dsa_setup_dst, return -ENODEV and
exit the dsa_probe cleanly.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: switch to devm_ calls and remove kfree calls
Neil Armstrong [Tue, 6 Oct 2015 14:40:37 +0000 (15:40 +0100)]
net: dsa: switch to devm_ calls and remove kfree calls

Now the kfree calls exists in the the remove functions, remove them in all
places except the of_probe functions and replace allocation calls
with their devm_ counterparts.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: complete dsa_switch_destroy
Neil Armstrong [Tue, 6 Oct 2015 14:40:32 +0000 (15:40 +0100)]
net: dsa: complete dsa_switch_destroy

When unbinding dsa, complete the dsa_switch_destroy to unregister the
fixed link phy then cleanly unregister and destroy the net devices.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: add missing dsa_switch mdiobus remove
Neil Armstrong [Tue, 6 Oct 2015 14:40:25 +0000 (15:40 +0100)]
net: dsa: add missing dsa_switch mdiobus remove

To prevent memory leakage on unbinding, add missing mdiobus unregister
and unallocation calls.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: add missing kfree on remove
Neil Armstrong [Tue, 6 Oct 2015 14:39:53 +0000 (15:39 +0100)]
net: dsa: add missing kfree on remove

To prevent memory leakage on unbinding, add missing kfree calls.
Includes minor cosmetic change to make patch clean.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: Fix vti use case with oif in dst lookups for IPv6
David Ahern [Mon, 5 Oct 2015 14:32:51 +0000 (08:32 -0600)]
net: Fix vti use case with oif in dst lookups for IPv6

It occurred to me yesterday that 741a11d9e4103 ("net: ipv6: Add
RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup
needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes
the oif to be considered in lookups which is known to break vti. This
explains why 58189ca7b274 did not the IPv6 change at the time it was
submitted.

Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoi40e/i40evf: set AQ count after memory allocation
Mitch Williams [Sun, 4 Oct 2015 00:13:05 +0000 (17:13 -0700)]
i40e/i40evf: set AQ count after memory allocation

The standard way to check if the AQ is enabled is to look at the
count field. So we should only set this field after we have
successfully allocated memory. To do otherwise is to incite
panic among the populace.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe: Check for successful buffer allocation before use
Tom Lendacky [Mon, 5 Oct 2015 15:51:03 +0000 (10:51 -0500)]
amd-xgbe: Check for successful buffer allocation before use

The kasprintf function can return NULL if the allocation fails. Check for
successful allocation before attempting to use the returned buffer.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Fix ovs_vport_get_stats()
Pravin B Shelar [Fri, 2 Oct 2015 21:56:34 +0000 (14:56 -0700)]
openvswitch: Fix ovs_vport_get_stats()

Not every device has dev->tstats set. So when OVS tries to calculate
vport stats it causes kernel panic. Following patch fixes it by
using standard API to get net-device stats.

---8<---
Unable to handle kernel paging request at virtual address 766b4008
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: vport_vxlan vxlan ip6_udp_tunnel udp_tunnel tun bridge stp llc openvswitch ipv6
CPU: 7 PID: 1108 Comm: ovs-vswitchd Not tainted 4.3.0-rc3+ #82
PC is at ovs_vport_get_stats+0x150/0x1f8 [openvswitch]
<snip>
Call trace:
 [<ffffffbffc0859f8>] ovs_vport_get_stats+0x150/0x1f8 [openvswitch]
 [<ffffffbffc07cdb0>] ovs_vport_cmd_fill_info+0x140/0x1e0 [openvswitch]
 [<ffffffbffc07cf0c>] ovs_vport_cmd_dump+0xbc/0x138 [openvswitch]
 [<ffffffc00045a5ac>] netlink_dump+0xb8/0x258
 [<ffffffc00045ace0>] __netlink_dump_start+0x120/0x178
 [<ffffffc00045dd9c>] genl_family_rcv_msg+0x2d4/0x308
 [<ffffffc00045de58>] genl_rcv_msg+0x88/0xc4
 [<ffffffc00045cf24>] netlink_rcv_skb+0xd4/0x100
 [<ffffffc00045dab0>] genl_rcv+0x30/0x48
 [<ffffffc00045c830>] netlink_unicast+0x154/0x200
 [<ffffffc00045cc9c>] netlink_sendmsg+0x308/0x364
 [<ffffffc00041e10c>] sock_sendmsg+0x14/0x2c
 [<ffffffc000420d58>] SyS_sendto+0xbc/0xf0
Code: aa1603e1 f94037a4 aa1303e2 aa1703e0 (f9400465)

Reported-by: Tomasz Sawicki <tomasz.sawicki@objectiveintegration.uk>
Fixes: 8c876639c98 ("openvswitch: Remove vport stats.")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoARM: net: make BPF_LD | BPF_IND instruction trigger r_X initialisation to 0.
Nicolas Schichan [Fri, 2 Oct 2015 13:39:12 +0000 (15:39 +0200)]
ARM: net: make BPF_LD | BPF_IND instruction trigger r_X initialisation to 0.

Without this patch, if the only instructions using r_X are of the
BPF_LD | BPF_IND type, r_X would not be reset to 0, using whatever
value was there when entering the jited code. With this patch, r_X
will be correctly marked as used so it will be reset to 0 in the
prologue code.

This fix also makes the test "LD_IND byte default X" pass in the
test_bpf module when the ARM JIT is enabled.

Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoovs: do not allocate memory from offline numa node
Konstantin Khlebnikov [Fri, 2 Oct 2015 10:18:22 +0000 (13:18 +0300)]
ovs: do not allocate memory from offline numa node

When openvswitch tries allocate memory from offline numa node 0:
stats = kmem_cache_alloc_node(flow_stats_cache, GFP_KERNEL | __GFP_ZERO, 0)
It catches VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid))
[ replaced with VM_WARN_ON(!node_online(nid)) recently ] in linux/gfp.h
This patch disables numa affinity in this case.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobpf: fix panic in SO_GET_FILTER with native ebpf programs
Daniel Borkmann [Fri, 2 Oct 2015 10:06:03 +0000 (12:06 +0200)]
bpf: fix panic in SO_GET_FILTER with native ebpf programs

When sockets have a native eBPF program attached through
setsockopt(sk, SOL_SOCKET, SO_ATTACH_BPF, ...), and then try to
dump these over getsockopt(sk, SOL_SOCKET, SO_GET_FILTER, ...),
the following panic appears:

  [49904.178642] BUG: unable to handle kernel NULL pointer dereference at (null)
  [49904.178762] IP: [<ffffffff81610fd9>] sk_get_filter+0x39/0x90
  [49904.182000] PGD 86fc9067 PUD 531a1067 PMD 0
  [49904.185196] Oops: 0000 [#1] SMP
  [...]
  [49904.224677] Call Trace:
  [49904.226090]  [<ffffffff815e3d49>] sock_getsockopt+0x319/0x740
  [49904.227535]  [<ffffffff812f59e3>] ? sock_has_perm+0x63/0x70
  [49904.228953]  [<ffffffff815e2fc8>] ? release_sock+0x108/0x150
  [49904.230380]  [<ffffffff812f5a43>] ? selinux_socket_getsockopt+0x23/0x30
  [49904.231788]  [<ffffffff815dff36>] SyS_getsockopt+0xa6/0xc0
  [49904.233267]  [<ffffffff8171b9ae>] entry_SYSCALL_64_fastpath+0x12/0x71

The underlying issue is the very same as in commit b382c0865600
("sock, diag: fix panic in sock_diag_put_filterinfo"), that is,
native eBPF programs don't store an original program since this
is only needed in cBPF ones.

However, sk_get_filter() wasn't updated to test for this at the
time when eBPF could be attached. Just throw an error to the user
to indicate that eBPF cannot be dumped over this interface.
That way, it can also be known that a program _is_ attached (as
opposed to just return 0), and a different (future) method needs
to be consulted for a dump.

Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Rename LABEL->LABELS
Joe Stringer [Thu, 1 Oct 2015 22:00:37 +0000 (15:00 -0700)]
openvswitch: Rename LABEL->LABELS

Conntrack LABELS (plural) are exposed by conntrack; rename the OVS name
for these to be consistent with conntrack.

Fixes: c2ac667 "openvswitch: Allow matching on conntrack label"
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/unix: fix logic about sk_peek_offset
Andrey Vagin [Thu, 1 Oct 2015 21:05:36 +0000 (00:05 +0300)]
net/unix: fix logic about sk_peek_offset

Now send with MSG_PEEK can return data from multiple SKBs.

Unfortunately we take into account the peek offset for each skb,
that is wrong. We need to apply the peek offset only once.

In addition, the peek offset should be used only if MSG_PEEK is set.

Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING
Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%)
Cc: Aaron Conole <aconole@bytheb.org>
Fixes: 9f389e35674f ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag")
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Tested-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoact_mirred: always release tcf hash
WANG Cong [Thu, 1 Oct 2015 18:37:43 +0000 (11:37 -0700)]
act_mirred: always release tcf hash

Align with other tc actions.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoact_mirred: fix a race condition on mirred_list
WANG Cong [Thu, 1 Oct 2015 18:37:42 +0000 (11:37 -0700)]
act_mirred: fix a race condition on mirred_list

After commit 1ce87720d456 ("net: sched: make cls_u32 lockless")
we began to release tc actions in a RCU callback. However,
mirred action relies on RTNL lock to protect the global
mirred_list, therefore we could have a race condition
between RCU callback and netdevice event, which caused
a list corruption as reported by Vinson.

Instead of relying on RTNL lock, introduce a spinlock to
protect this list.

Note, in non-bind case, it is still called with RTNL lock,
therefore should disable BH too.

Reported-by: Vinson Lee <vlee@twopensource.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoi40e: fix offload of GRE tunnels
Jesse Brandeburg [Fri, 2 Oct 2015 01:25:42 +0000 (18:25 -0700)]
i40e: fix offload of GRE tunnels

The driver still was not offloading TSO on GRE tunnels because
it forgot to set the GSO_GRE flag, causing lots of retransmits.

This fixes generic GRE traffic (like a tunnel added like below)
whereas before it would get 1Gb/s or less, now on a 10G adapter
it gets 8.7Gb/s.

ip ad ad 11.1.0.2/24 dev ens2f0
ip l set ens2f0 up
ip link add gre2 type gretap remote 11.1.0.1 local 11.1.0.2 dev ens2f0
ip l set gre2 up
ip ad ad 192.168.124.2/24 dev gre2
ping 192.168.124.1
netperf -H 192.168.124.1

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'wireless-drivers-for-davem-2015-10-01' of git://git.kernel.org/pub/scm...
David S. Miller [Mon, 5 Oct 2015 11:29:06 +0000 (04:29 -0700)]
Merge tag 'wireless-drivers-for-davem-2015-10-01' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
pull-request: wireless-drivers 2015-10-01

ath9k:

* declare required extra tx headroom

ath10k:

* fix DMA related firmware crashes on multiple devices

rt2800usb:

* add usb ID 1b75:3070 for Airlive WT-2000USB

b43:

* probe bcma core (device) rev 0x15
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv4: fix reply_dst leakage on arp reply
Jiri Benc [Thu, 1 Oct 2015 14:25:43 +0000 (16:25 +0200)]
ipv4: fix reply_dst leakage on arp reply

There are cases when the created metadata reply is not used. Ensure the
allocated memory is freed also in such cases.

Fixes: 63d008a4e9ee ("ipv4: send arp replies to the correct tunnel")
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoinet: fix race in reqsk_queue_unlink()
Eric Dumazet [Thu, 1 Oct 2015 12:39:26 +0000 (05:39 -0700)]
inet: fix race in reqsk_queue_unlink()

reqsk_timer_handler() tests if icsk_accept_queue.listen_opt
is NULL at its beginning.

By the time it calls inet_csk_reqsk_queue_drop() and
reqsk_queue_unlink(), listener might have been closed and
inet_csk_listen_stop() had called reqsk_queue_yank_acceptq()
which sets icsk_accept_queue.listen_opt to NULL

We therefore need to correctly check listen_opt being NULL
after holding syn_wait_lock for proper synchronization.

Fixes: fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer")
Fixes: b357a364c57c ("inet: fix possible panic in reqsk_queue_unlink()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotcp/dccp: fix old style declarations
Raanan Avargil [Thu, 1 Oct 2015 11:48:53 +0000 (04:48 -0700)]
tcp/dccp: fix old style declarations

I’m using the compilation flag -Werror=old-style-declaration, which
requires that the “inline” word would come at the beginning of the code
line.

$ make drivers/net/ethernet/intel/e1000e/e1000e.ko
...
include/net/inet_timewait_sock.h:116:1: error: ‘inline’ is not at
beginning of declaration [-Werror=old-style-declaration]
static void inline inet_twsk_schedule(struct inet_timewait_sock *tw, int
timeo)

include/net/inet_timewait_sock.h:121:1: error: ‘inline’ is not at
beginning of declaration [-Werror=old-style-declaration]
static void inline inet_twsk_reschedule(struct inet_timewait_sock *tw,
int timeo)

Fixes: ed2e92394589 ("tcp/dccp: fix timewait races in timer handling")
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: lpc_eth: fix warnings caused by enabling unprepared clock
Vladimir Zapolskiy [Wed, 30 Sep 2015 21:37:43 +0000 (00:37 +0300)]
net: lpc_eth: fix warnings caused by enabling unprepared clock

If common clock framework is configured, the driver generates warnings,
which are fixed by this change:

    WARNING: CPU: 0 PID: 1 at linux/drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4()
    Modules linked in:
    CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #141
    Hardware name: LPC32XX SoC (Flattened Device Tree)
    Backtrace:
    [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c)
    [<>] (show_stack) from [<>] (dump_stack+0x20/0x28)
    [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8)
    [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c)
    [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4)
    [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38)
    [<>] (clk_enable) from [<>] (lpc_eth_drv_probe+0xfc/0x99c)
    [<>] (lpc_eth_drv_probe) from [<>] (platform_drv_probe+0x50/0xa0)
    [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408)
    [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94)
    [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98)
    [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28)
    [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248)
    [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8)
    [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64)
    [<>] (__platform_driver_register) from [<>] (lpc_eth_driver_init+0x18/0x20)
    [<>] (lpc_eth_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc)
    [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4)
    [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec)
    [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24)

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: usb: asix: Fix crash on skb alloc failure
David B. Robins [Wed, 30 Sep 2015 20:20:04 +0000 (16:20 -0400)]
net: usb: asix: Fix crash on skb alloc failure

If asix_rx_fixup_internal() fails to allocate rx->ax_skb, it will return
but not clear rx->size. rx points to driver private data. A later call
assumes that nonzero size means ax_skb was allocated and passes a null
ax_skb to skb_put. Changed allocation failure return to clear size first.

Found testing board with AX88772B devices.

Signed-off-by: David B. Robins <linux@davidrobins.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'linux-can-fixes-for-4.3-20150930' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Mon, 5 Oct 2015 10:07:02 +0000 (03:07 -0700)]
Merge tag 'linux-can-fixes-for-4.3-20150930' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2015-09-30

this is a pull request of a single patch for 4.3.

The patch is by Stephane Grosjean and add support for the peak OEM PCI card to
the peak_pci driver by adding its device ID.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoamd-xgbe: fix potential memory leak in xgbe-debugfs
Geliang Tang [Wed, 30 Sep 2015 10:48:50 +0000 (03:48 -0700)]
amd-xgbe: fix potential memory leak in xgbe-debugfs

Added kfree() to avoid the memory leak when debugfs_create_dir() fails.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoppp: don't override sk->sk_state in pppoe_flush_dev()
Guillaume Nault [Wed, 30 Sep 2015 09:45:33 +0000 (11:45 +0200)]
ppp: don't override sk->sk_state in pppoe_flush_dev()

Since commit 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"),
pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the
PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to
PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the
following oops:

[  570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0
[  570.142931] IP: [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0
[  570.144601] Oops: 0000 [#1] SMP
[  570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio
[  570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1
[  570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[  570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000
[  570.144601] RIP: 0010:[<ffffffffa018c701>]  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] RSP: 0018:ffff880036b63e08  EFLAGS: 00010202
[  570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206
[  570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20
[  570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000
[  570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780
[  570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0
[  570.144601] FS:  00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000
[  570.144601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0
[  570.144601] Stack:
[  570.144601]  ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0
[  570.144601]  ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008
[  570.144601]  ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5
[  570.144601] Call Trace:
[  570.144601]  [<ffffffff812caabe>] sock_release+0x1a/0x75
[  570.144601]  [<ffffffff812cabad>] sock_close+0xd/0x11
[  570.144601]  [<ffffffff811347f5>] __fput+0xff/0x1a5
[  570.144601]  [<ffffffff811348cb>] ____fput+0x9/0xb
[  570.144601]  [<ffffffff81056682>] task_work_run+0x66/0x90
[  570.144601]  [<ffffffff8100189e>] prepare_exit_to_usermode+0x8c/0xa7
[  570.144601]  [<ffffffff81001a26>] syscall_return_slowpath+0x16d/0x19b
[  570.144601]  [<ffffffff813babb1>] int_ret_from_sys_call+0x25/0x9f
[  570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00
[  570.144601] RIP  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601]  RSP <ffff880036b63e08>
[  570.144601] CR2: 00000000000004e0
[  570.200518] ---[ end trace 46956baf17349563 ]---

pppoe_flush_dev() has no reason to override sk->sk_state with
PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to
PPPOX_DEAD, which is the correct state given that sk is unbound and
po->pppoe_dev is NULL.

Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Tested-by: Oleksii Berezhniak <core@irc.lg.ua>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc
Linus Torvalds [Fri, 2 Oct 2015 12:03:04 +0000 (08:03 -0400)]
Merge tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.3 rc4:

  MMC core:
   - Allow users of mmc_of_parse() to succeed when CONFIG_GPIOLIB is
     unset
   - Prevent infinite loop of re-tuning for CRC-errors for CMD19 and
     CMD21

   MMC host:
   - pxamci: Fix issues with card detect
   - sunxi: Fix clk-delay settings"

* tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: core: fix dead loop of mmc_retune
  mmc: pxamci: fix card detect with slot-gpio API
  mmc: sunxi: Fix clk-delay settings
  mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unset

9 years agoMerge git://git.infradead.org/intel-iommu
Linus Torvalds [Fri, 2 Oct 2015 11:59:29 +0000 (07:59 -0400)]
Merge git://git.infradead.org/intel-iommu

Pull IOVA fixes from David Woodhouse:
 "The main fix here is the first one, fixing the over-allocation of
   size-aligned requests.  The other patches simply make the existing
  IOVA code available to users other than the Intel VT-d driver, with no
  functional change.

  I concede the latter really *should* have been submitted during the
  merge window, but since it's basically risk-free and people are
  waiting to build on top of it and it's my fault I didn't get it in, I
  (and they) would be grateful if you'd take it"

* git://git.infradead.org/intel-iommu:
  iommu: Make the iova library a module
  iommu: iova: Export symbols
  iommu: iova: Move iova cache management to the iova library
  iommu/iova: Avoid over-allocating when size-aligned

9 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Fri, 2 Oct 2015 02:20:11 +0000 (22:20 -0400)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "12 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  dmapool: fix overflow condition in pool_find_page()
  thermal: avoid division by zero in power allocator
  memcg: remove pcp_counter_lock
  kprobes: use _do_fork() in samples to make them work again
  drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE
  memcg: make mem_cgroup_read_stat() unsigned
  memcg: fix dirty page migration
  dax: fix NULL pointer in __dax_pmd_fault()
  mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault
  mm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1)
  userfaultfd: remove kernel header include from uapi header
  arch/x86/include/asm/efi.h: fix build failure

9 years agoMerge tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 2 Oct 2015 02:06:40 +0000 (22:06 -0400)]
Merge tag 'pm+acpi-4.3-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes mostly, for a few changes made in this cycle (the
  intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and
  for some issues that have just been discovered (ACPI PCI IRQ
  management, PCI power management documentation, turbostat), with a
  couple of cleanups on top of them.

  Specifics:

   - intel_idle driver fixup for the recently added Skylake chips
     support (Len Brown).

   - Operating Performance Points (OPP) library fix related to the
     recently added support for new DT bindings and a fix for a typo in
     a comment (Viresh Kumar, Stephen Boyd).

   - ACPI EC driver fix for a recently introduced memory leak in an
     error code path (Lv Zheng).

   - ACPI PCI IRQ management fix for the issue where an ISA IRQ is
     shared with a PCI device which requires it to be configured in a
     different way and may cause an interrupt storm to happen as a
     result with an extra ACPI SCI IRQ handling simplification on top of
     it (Jiang Liu).

   - Update of the PCI power management documentation that became
     outdated and started to actively confuse the readers to make it
     actually reflect the code (Rafael J Wysocki).

   - turbostat fixes including an IVB Xeon regression fix (related to
     the --debug command line option), Skylake adjustment for the TSC
     running at a frequency that doesn't match the base one exactly, and
     a Knights Landing quirk to account for the fact that it only
     updates APERF and MPERF every 1024 clock cycles plus bumping up the
     turbostat version number (Len Brown, Hubert Chrzaniuk)"

* tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power turbosat: update version number
  tools/power turbostat: SKL: Adjust for TSC difference from base frequency
  tools/power turbostat: KNL workaround for %Busy and Avg_MHz
  tools/power turbostat: IVB Xeon: fix --debug regression
  ACPI / PCI: Remove duplicated penalty on SCI IRQ
  ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
  ACPI / EC: Fix a memory leak issue in acpi_ec_query()
  PM / OPP: Fix typo modifcation -> modification
  PCI / PM: Update runtime PM documentation for PCI devices
  PM / OPP: of_property_count_u32_elems() can return errors
  intel_idle: Skylake Client Support - updated

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 2 Oct 2015 01:55:35 +0000 (21:55 -0400)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix regression in SKB partial checksum handling, from Pravin B
   Shalar.

2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse
   Brandeburg.

3) Cure softlockups during accept() in SCTP, from Karl Heiss.

4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from
   Aaron Conole.

5) IPV6 erroneously ignores output interface specifier in lookup key for
   route lookups, fix from David Ahern.

6) In Marvell DSA driver, forward unknown frames to CPU port, from
   Andrew Lunn.

7) Mission flow flag initializations in some code paths, from David
   Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: Initialize flow flags in input path
  net: dsa: fix preparation of a port STP update
  testptp: Silence compiler warnings on ppc64
  net/mlx4: Handle return codes in mlx4_qp_attach_common
  dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port
  skbuff: Fix skb checksum partial check.
  net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set
  net sysfs: Print link speed as signed integer
  bna: fix error handling
  af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag
  af_unix: Convert the unix_sk macro to an inline function for type safety
  net: sctp: Don't use 64 kilobyte lookup table for four elements
  l2tp: protect tunnel->del_work by ref_count
  net/ibm/emac: bump version numbers for correct work with ethtool
  sctp: Prevent soft lockup when sctp_accept() is called during a timeout event
  sctp: Whitespace fix
  i40e/i40evf: check for stopped admin queue
  i40e: fix VLAN inside VXLAN
  r8169: fix handling rtl_readphy result
  net: hisilicon: fix handling platform_get_irq result

9 years agodmapool: fix overflow condition in pool_find_page()
Robin Murphy [Thu, 1 Oct 2015 22:37:19 +0000 (15:37 -0700)]
dmapool: fix overflow condition in pool_find_page()

If a DMA pool lies at the very top of the dma_addr_t range (as may
happen with an IOMMU involved), the calculated end address of the pool
wraps around to zero, and page lookup always fails.

Tweak the relevant calculation to be overflow-proof.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agothermal: avoid division by zero in power allocator
Andrea Arcangeli [Thu, 1 Oct 2015 22:37:16 +0000 (15:37 -0700)]
thermal: avoid division by zero in power allocator

During boot I get a div by zero Oops regression starting in v4.3-rc3.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomemcg: remove pcp_counter_lock
Greg Thelen [Thu, 1 Oct 2015 22:37:13 +0000 (15:37 -0700)]
memcg: remove pcp_counter_lock

Commit 733a572e66d2 ("memcg: make mem_cgroup_read_{stat|event}() iterate
possible cpus instead of online") removed the last use of the per memcg
pcp_counter_lock but forgot to remove the variable.

Kill the vestigial variable.

Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokprobes: use _do_fork() in samples to make them work again
Petr Mladek [Thu, 1 Oct 2015 22:37:11 +0000 (15:37 -0700)]
kprobes: use _do_fork() in samples to make them work again

Commit 3033f14ab78c ("clone: support passing tls argument via C rather
than pt_regs magic") introduced _do_fork() that allowed to pass @tls
parameter.

The old do_fork() is defined only for architectures that are not ready
to use this way and do not define HAVE_COPY_THREAD_TLS.

Let's use _do_fork() in the kprobe examples to make them work again on
all architectures.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE
Andrew Morton [Thu, 1 Oct 2015 22:37:08 +0000 (15:37 -0700)]
drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE

It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in
vmlinux.

Cc: Fengguang Wu <fengguang.wu@gmail.com>
Cc: yalin wang <yalin.wang2010@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomemcg: make mem_cgroup_read_stat() unsigned
Greg Thelen [Thu, 1 Oct 2015 22:37:05 +0000 (15:37 -0700)]
memcg: make mem_cgroup_read_stat() unsigned

mem_cgroup_read_stat() returns a page count by summing per cpu page
counters.  The summing is racy wrt.  updates, so a transient negative
sum is possible.  Callers don't want negative values:

 - mem_cgroup_wb_stats() doesn't want negative nr_dirty or nr_writeback.
   This could confuse dirty throttling.

 - oom reports and memory.stat shouldn't show confusing negative usage.

 - tree_usage() already avoids negatives.

Avoid returning negative page counts from mem_cgroup_read_stat() and
convert it to unsigned.

[akpm@linux-foundation.org: fix old typo while we're in there]
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomemcg: fix dirty page migration
Greg Thelen [Thu, 1 Oct 2015 22:37:02 +0000 (15:37 -0700)]
memcg: fix dirty page migration

The problem starts with a file backed dirty page which is charged to a
memcg.  Then page migration is used to move oldpage to newpage.

Migration:
 - copies the oldpage's data to newpage
 - clears oldpage.PG_dirty
 - sets newpage.PG_dirty
 - uncharges oldpage from memcg
 - charges newpage to memcg

Clearing oldpage.PG_dirty decrements the charged memcg's dirty page
count.

However, because newpage is not yet charged, setting newpage.PG_dirty
does not increment the memcg's dirty page count.  After migration
completes newpage.PG_dirty is eventually cleared, often in
account_page_cleaned().  At this time newpage is charged to a memcg so
the memcg's dirty page count is decremented which causes underflow
because the count was not previously incremented by migration.  This
underflow causes balance_dirty_pages() to see a very large unsigned
number of dirty memcg pages which leads to aggressive throttling of
buffered writes by processes in non root memcg.

This issue:
 - can harm performance of non root memcg buffered writes.
 - can report too small (even negative) values in
   memory.stat[(total_)dirty] counters of all memcg, including the root.

To avoid polluting migrate.c with #ifdef CONFIG_MEMCG checks, introduce
page_memcg() and set_page_memcg() helpers.

Test:
    0) setup and enter limited memcg
    mkdir /sys/fs/cgroup/test
    echo 1G > /sys/fs/cgroup/test/memory.limit_in_bytes
    echo $$ > /sys/fs/cgroup/test/cgroup.procs

    1) buffered writes baseline
    dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k
    sync
    grep ^dirty /sys/fs/cgroup/test/memory.stat

    2) buffered writes with compaction antagonist to induce migration
    yes 1 > /proc/sys/vm/compact_memory &
    rm -rf /data/tmp/foo
    dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k
    kill %
    sync
    grep ^dirty /sys/fs/cgroup/test/memory.stat

    3) buffered writes without antagonist, should match baseline
    rm -rf /data/tmp/foo
    dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k
    sync
    grep ^dirty /sys/fs/cgroup/test/memory.stat

                       (speed, dirty residue)
             unpatched                       patched
    1) 841 MB/s 0 dirty pages          886 MB/s 0 dirty pages
    2) 611 MB/s -33427456 dirty pages  793 MB/s 0 dirty pages
    3) 114 MB/s -33427456 dirty pages  891 MB/s 0 dirty pages

    Notice that unpatched baseline performance (1) fell after
    migration (3): 841 -> 114 MB/s.  In the patched kernel, post
    migration performance matches baseline.

Fixes: c4843a7593a9 ("memcg: add per cgroup dirty page accounting")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reported-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodax: fix NULL pointer in __dax_pmd_fault()
Ross Zwisler [Thu, 1 Oct 2015 22:36:59 +0000 (15:36 -0700)]
dax: fix NULL pointer in __dax_pmd_fault()

Commit 46c043ede471 ("mm: take i_mmap_lock in unmap_mapping_range() for
DAX") moved some code in __dax_pmd_fault() that was responsible for
zeroing newly allocated PMD pages.  The new location didn't properly set
up 'kaddr', so when run this code resulted in a NULL pointer BUG.

Fix this by getting the correct 'kaddr' via bdev_direct_access().

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault
Mel Gorman [Thu, 1 Oct 2015 22:36:57 +0000 (15:36 -0700)]
mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault

SunDong reported the following on

  https://bugzilla.kernel.org/show_bug.cgi?id=103841

I think I find a linux bug, I have the test cases is constructed. I
can stable recurring problems in fedora22(4.0.4) kernel version,
arch for x86_64.  I construct transparent huge page, when the parent
and child process with MAP_SHARE, MAP_PRIVATE way to access the same
huge page area, it has the opportunity to lead to huge page copy on
write failure, and then it will munmap the child corresponding mmap
area, but then the child mmap area with VM_MAYSHARE attributes, child
process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags
functions (vma - > vm_flags & VM_MAYSHARE).

There were a number of problems with the report (e.g.  it's hugetlbfs that
triggers this, not transparent huge pages) but it was fundamentally
correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that
looks like this

 vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000
 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800
 prot 8000000000000027 anon_vma           (null) vm_ops ffffffff8182a7a0
 pgoff 0 file ffff88106bdb9800 private_data           (null)
 flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb)
 ------------
 kernel BUG at mm/hugetlb.c:462!
 SMP
 Modules linked in: xt_pkttype xt_LOG xt_limit [..]
 CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1
 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012
 set_vma_resv_flags+0x2d/0x30

The VM_BUG_ON is correct because private and shared mappings have
different reservation accounting but the warning clearly shows that the
VMA is shared.

When a private COW fails to allocate a new page then only the process
that created the VMA gets the page -- all the children unmap the page.
If the children access that data in the future then they get killed.

The problem is that the same file is mapped shared and private.  During
the COW, the allocation fails, the VMAs are traversed to unmap the other
private pages but a shared VMA is found and the bug is triggered.  This
patch identifies such VMAs and skips them.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: SunDong <sund_sky@126.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1)
Joonsoo Kim [Thu, 1 Oct 2015 22:36:54 +0000 (15:36 -0700)]
mm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1)

Commit description is copied from the original post of this bug:

  http://comments.gmane.org/gmane.linux.kernel.mm/135349

Kernels after v3.9 use kmalloc_size(INDEX_NODE + 1) to get the next
larger cache size than the size index INDEX_NODE mapping.  In kernels
3.9 and earlier we used malloc_sizes[INDEX_L3 + 1].cs_size.

However, sometimes we can't get the right output we expected via
kmalloc_size(INDEX_NODE + 1), causing a BUG().

The mapping table in the latest kernel is like:
    index = {0,   1,  2 ,  3,  4,   5,   6,   n}
     size = {0,   96, 192, 8, 16,  32,  64,   2^n}
The mapping table before 3.10 is like this:
    index = {0 , 1 , 2,   3,  4 ,  5 ,  6,   n}
    size  = {32, 64, 96, 128, 192, 256, 512, 2^(n+3)}

The problem on my mips64 machine is as follows:

(1) When configured DEBUG_SLAB && DEBUG_PAGEALLOC && DEBUG_LOCK_ALLOC
    && DEBUG_SPINLOCK, the sizeof(struct kmem_cache_node) will be "150",
    and the macro INDEX_NODE turns out to be "2": #define INDEX_NODE
    kmalloc_index(sizeof(struct kmem_cache_node))

(2) Then the result of kmalloc_size(INDEX_NODE + 1) is 8.

(3) Then "if(size >= kmalloc_size(INDEX_NODE + 1)" will lead to "size
    = PAGE_SIZE".

(4) Then "if ((size >= (PAGE_SIZE >> 3))" test will be satisfied and
    "flags |= CFLGS_OFF_SLAB" will be covered.

(5) if (flags & CFLGS_OFF_SLAB)" test will be satisfied and will go to
    "cachep->slabp_cache = kmalloc_slab(slab_size, 0u)", and the result
    here may be NULL while kernel bootup.

(6) Finally,"BUG_ON(ZERO_OR_NULL_PTR(cachep->slabp_cache));" causes the
    BUG info as the following shows (may be only mips64 has this problem):

This patch fixes the problem of kmalloc_size(INDEX_NODE + 1) and removes
the BUG by adding 'size >= 256' check to guarantee that all necessary
small sized slabs are initialized regardless sequence of slab size in
mapping table.

Fixes: e33660165c90 ("slab: Use common kmalloc_index/kmalloc_size...")
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-by: Liuhailong <liu.hailong6@zte.com.cn>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agouserfaultfd: remove kernel header include from uapi header
Andre Przywara [Thu, 1 Oct 2015 22:36:51 +0000 (15:36 -0700)]
userfaultfd: remove kernel header include from uapi header

As include/uapi/linux/userfaultfd.h is a user visible header file, it
should not include kernel-exclusive header files.

So trying to build the userfaultfd test program from the selftests
directory fails, since it contains a reference to linux/compiler.h.  As
it turns out, that header is not really needed there, so we can simply
remove it to fix that issue.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoarch/x86/include/asm/efi.h: fix build failure
Andrey Ryabinin [Thu, 1 Oct 2015 22:36:48 +0000 (15:36 -0700)]
arch/x86/include/asm/efi.h: fix build failure

With KMEMCHECK=y, KASAN=n:

  arch/x86/platform/efi/efi.c:673:3: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration]
  arch/x86/platform/efi/efi_64.c:139:2: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration]
  arch/x86/include/asm/desc.h:121:2: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration]

Don't #undef memcpy if KASAN=n.

Fixes: 769a8089c1fd ("x86, efi, kasan: #undef memset/memcpy/memmove per arch")
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 1 Oct 2015 20:43:25 +0000 (16:43 -0400)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "(Relatively) a lot of reverts, mostly.

  Bugs have trickled in for a new feature in 4.2 (MTRR support in
  guests) so I'm reverting it all; let's not make this -rc period busier
  for KVM than it's been so far.  This covers the four reverts from me.

  The fifth patch is being reverted because Radim found a bug in the
  implementation of stable scheduler clock, *but* also managed to
  implement the feature entirely without hypervisor support.  So instead
  of fixing the hypervisor side we can remove it completely; 4.4 will
  get the new implementation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  Use WARN_ON_ONCE for missing X86_FEATURE_NRIPS
  Update KVM homepage Url
  Revert "KVM: SVM: use NPT page attributes"
  Revert "KVM: svm: handle KVM_X86_QUIRK_CD_NW_CLEARED in svm_get_mt_mask"
  Revert "KVM: SVM: Sync g_pat with guest-written PAT value"
  Revert "KVM: x86: apply guest MTRR virtualization on host reserved pages"
  Revert "KVM: x86: zero kvmclock_offset when vcpu0 initializes kvmclock system MSR"

9 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Linus Torvalds [Thu, 1 Oct 2015 20:38:52 +0000 (16:38 -0400)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fixes from Doug Ledford:
 - Fixes for mlx5 related issues
 - Fixes for ipoib multicast handling

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/ipoib: increase the max mcast backlog queue
  IB/ipoib: Make sendonly multicast joins create the mcast group
  IB/ipoib: Expire sendonly multicast joins
  IB/mlx5: Remove pa_lkey usages
  IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEY
  IB/iser: Add module parameter for always register memory
  xprtrdma: Replace global lkey with lkey local to PD

9 years agoMerge branches 'pm-cpuidle', 'pm-opp' and 'pm-tools'
Rafael J. Wysocki [Thu, 1 Oct 2015 20:30:47 +0000 (22:30 +0200)]
Merge branches 'pm-cpuidle', 'pm-opp' and 'pm-tools'

* pm-cpuidle:
  intel_idle: Skylake Client Support - updated

* pm-opp:
  PM / OPP: Fix typo modifcation -> modification
  PM / OPP: of_property_count_u32_elems() can return errors

* pm-tools:
  tools/power turbosat: update version number
  tools/power turbostat: SKL: Adjust for TSC difference from base frequency
  tools/power turbostat: KNL workaround for %Busy and Avg_MHz
  tools/power turbostat: IVB Xeon: fix --debug regression

9 years agoMerge branch 'acpi-ec'
Rafael J. Wysocki [Thu, 1 Oct 2015 20:30:35 +0000 (22:30 +0200)]
Merge branch 'acpi-ec'

* acpi-ec:
  ACPI / EC: Fix a memory leak issue in acpi_ec_query()

9 years agoMerge branches 'pm-pci' and 'acpi-pci'
Rafael J. Wysocki [Thu, 1 Oct 2015 20:30:12 +0000 (22:30 +0200)]
Merge branches 'pm-pci' and 'acpi-pci'

* pm-pci:
  PCI / PM: Update runtime PM documentation for PCI devices

* acpi-pci:
  ACPI / PCI: Remove duplicated penalty on SCI IRQ
  ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ

9 years agoUse WARN_ON_ONCE for missing X86_FEATURE_NRIPS
Dirk Müller [Thu, 1 Oct 2015 11:43:42 +0000 (13:43 +0200)]
Use WARN_ON_ONCE for missing X86_FEATURE_NRIPS

The cpu feature flags are not ever going to change, so warning
everytime can cause a lot of kernel log spam
(in our case more than 10GB/hour).

The warning seems to only occur when nested virtualization is
enabled, so it's probably triggered by a KVM bug.  This is a
sensible and safe change anyway, and the KVM bug fix might not
be suitable for stable releases anyway.

Cc: stable@vger.kernel.org
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
9 years agoUpdate KVM homepage Url
Dirk Müller [Thu, 1 Oct 2015 11:46:01 +0000 (13:46 +0200)]
Update KVM homepage Url

The old one appears to be a generic catch all page, which
is unhelpful.

Signed-off-by: Dirk Mueller <dmueller@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
9 years agoMerge tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Thu, 1 Oct 2015 11:57:27 +0000 (07:57 -0400)]
Merge tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs

Pull UBI/UBIFS fixes from Richard Weinberger:
 "This contains three bug fixes for both UBI and UBIFS"

* tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs:
  UBI: return ENOSPC if no enough space available
  UBI: Validate data_size
  UBIFS: Kill unneeded locking in ubifs_init_security

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 1 Oct 2015 11:50:08 +0000 (07:50 -0400)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull key signing fixes from James Morris:
 "Keyrings and modsign fixes from David Howells"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MODSIGN: Change from CMS to PKCS#7 signing if the openssl is too old
  X.509: Don't strip leading 00's from key ID when constructing key description
  KEYS: Remove unnecessary header #inclusions from extract-cert.c
  KEYS: Fix race between key destruction and finding a keyring by name