[S390] Fix broken logic, SIGA flags must be bitwise ORed

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] cio: Dont print trailing \0 in modalias_show().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Simplify stack trace.

sparse gives us a few of these:
stacktrace.c:69:38: warning: incorrect type in argument 2
                    (different signedness)
stacktrace.c:69:38:    expected unsigned int *skip

Just get rid of the 'skip' argument since it is contained in the
struct stack_trace that gets passed anyway.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] z/VM unit record device driver

z/VM Unit record character device driver to access VM reader, punch,
and printer.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] vmcp cleanup

A number of small changes to vmcp:
 - Change preferred email address.
 - Use PRINT_xxx machros from debug.h like most s390 drivers, define
   "vmcp:" as PRINTK_HEADER and wrap error message at column 80.
 - Add error number to error message.
 - Update copyright, as I touched this file.
 - Small whitespace diff.
 - Use mutex instead of semaphore (Thanks Heiko for the patch)
 - Don't register debug feature on failure.
 - Check debug feature registration on init to avoid a potential oops
   on unload if the debug feature could not be registered--> 2 more
   messages.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] qdio: output queue stall on FCP and network devices

When running QIOASSIST enabled qdio devices in a z/VM environment
the output queue for such devices stall in heavy workload situations.
When SQBS and EQBS instructions returns CCQ=96 qdio does not reissue
the instruction again with the register settings done by millicode
but processed the returned qdio buffer. This is wrong. qdio has to
reissue the instruction once again on CCQ=96, as we already do it
for CCQ=97.

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Fix disassembly of RX_URRD, SI_URD & PC-relative instructions.

The instructions with format RX_URRD and SI_URD and instructions
with a PC relative operand are not disassembled correctly.
For RX_URRD and SI_URD instructions find_insn sets opfrag to code[0].
The mask byte of these two formats is 0x00. table->opfrag will never
be identical to (opfrag & opmask) and no matching instruction will
be found. Set the mask byte to 0xff to actually check byte 0 against
the table.
For PC relative instructions the (unsigned) offset value needs to be
casted to an signed integer so that negative branch offsets are
handled correctly.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Merge branch 'drm-patches' of ssh:///linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: convert drawable code to using idr
  drm: convert drm context code to use Linux idr

drm: convert drawable code to using idr

This converts the code for allocating drawables to the Linux idr,

Fixes from: Michel Dänzer <michel@tungstengraphics.com>, Kristian Høgsberg <krh@redhat.com>

Signed-off-by: Dave Airlie <airlied@linux.ie>

drm: convert drm context code to use Linux idr

This converts the drm context allocator to an idr, using the new idr
interface features from Kristian.

Fixes from Kristian Hoegsberg <krh@redhat.com>

Signed-off-by: Dave Airlie <airlied@linux.ie>

Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits)
  [POWERPC] Create add_rtc() function to enable the RTC CMOS driver
  [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number
  [POWERPC] xilinxfb: Parameterize xilinxfb platform device registration
  [POWERPC] Oprofile support for Power 5++
  [POWERPC] Enable arbitary speed tty ioctls and split input/output speed
  [POWERPC] Make drivers/char/hvc_console.c:khvcd() static
  [POWERPC] Remove dead code for preventing pread() and pwrite() calls
  [POWERPC] Remove unnecessary #undef printk from prom.c
  [POWERPC] Fix typo in Ebony default DTS
  [POWERPC] Check for NULL ppc_md.init_IRQ() before calling
  [POWERPC] Remove extra return statement
  [POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED
  [POWERPC] pasemi: Rename platform
  [POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports
  [POWERPC] Add __read_mostly support for powerpc
  [POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane
  [POWERPC] Create a dummy zImage if no valid platform has been selected
  [POWERPC] PS3: Bootwrapper support.
  [POWERPC] powermac i2c: Use mutex
  [POWERPC] Schedule removal of arch/ppc
  ...

Fixed up conflicts manually in:

Documentation/feature-removal-schedule.txt
arch/powerpc/kernel/pci_32.c
arch/powerpc/kernel/pci_64.c
include/asm-powerpc/pci.h

and asked the powerpc people to double-check the result..

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (37 commits)
  forcedeth bug fix: realtek phy
  forcedeth bug fix: vitesse phy
  forcedeth bug fix: cicada phy
  atl1: reorder atl1_main functions
  atl1: fix excessively indented code
  atl1: cleanup atl1_main
  atl1: header file cleanup
  atl1: remove irq_sem
  cdc-subset to support new vendor/product ID
  8139cp: implement the missing dev->tx_timeout
  myri10ge: Remove nonsensical limit in the tx done routine
  gianfar: kill unused header
  EP93XX_ETH must select MII
  macb: Add multicast capability
  macb: Use generic PHY layer
  s390: add barriers to qeth driver
  s390: scatter-gather for inbound traffic in qeth driver
  eHEA: Introducing support vor DLPAR memory add
  Fix a potential NULL pointer dereference in free_shared_mem() in drivers/net/s2io.c
  [PATCH] softmac: Fix ESSID problem
  ...

Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SERIAL] SUNHV: Fix jerky console on LDOM guests.
  [SPARC64]: Fix race between MD update and dr-cpu add.
  [SPARC64]: SMP build fix.

[HRTIMER] Fix cpu pointer arg to clockevents_notify()

All of the clockevent notifiers expect a pointer to
an "unsigned int" cpu argument, but hrtimer_cpu_notify()
passes in a pointer to a long.

[ Discussed with and ok by Thomas Gleixner ]

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[SERIAL] SUNHV: Fix jerky console on LDOM guests.

Mixing putchar() and write() hvcalls does not work %100
correctly.  But we should be using write() all the time
if we can, even from ->start_tx(), anyways.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix race between MD update and dr-cpu add.

We need to make sure the MD update occurs before we try to
process dr-cpu configure requests.  MD update and dr-cpu
were being processed by seperate threads so that did not
happen occaisionally.

Fix this by executing all domain services data packets from
a single thread, in order.

This will help simplify some other things as well.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: SMP build fix.

The UP build fix had some unintended consequences.

Signed-off-by: David S. Miller <davem@davemloft.net>

Make BLK_DEV_BSG depend strictly on SCSI=y

The SCSI code can be compiled modular, but BLK_DEV_BSG currently cannot,
and depends on the SCSI layer.  So make sure that it depends on the SCSI
layer being compiled in, not just available as a module.

Noticed by Jeff Garzik and S.Çağlar Onur.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make check_signature depend on CONFIG_HAS_IOMEM

This should avoid build problems on architectures without a "readb()",
that got bitten by check_signature() being uninlined.

Noted by Heiko Carstens.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

forcedeth bug fix: realtek phy

This patch contains errata fixes for the realtek phy.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

forcedeth bug fix: vitesse phy

This patch contains errata fixes for the vitesse phy.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

forcedeth bug fix: cicada phy

This patch contains errata fixes for the cicada phy. It only renamed the
defines to be phy specific.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

atl1: reorder atl1_main functions

Reorder functions in atl1_main into more logical groupings to make the
code easier to follow. This patch is large, but it's harmless; it neither
adds nor removes any functionality whatsoever.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

atl1: fix excessively indented code

Move excessively indented code to separate functions.  Also move ring
pointer initialization to its own function.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

atl1: cleanup atl1_main

Fix indentation, remove dead code, improve some comments, change dev_dbg to
dev_printk.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

atl1: header file cleanup

Remove unused structure members, improve comments, break long comment lines,
rename a constant to be consistent with others in the file.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

atl1: remove irq_sem

Remove unnecessary irq_sem code.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

cdc-subset to support new vendor/product ID

This patch is for cdc subset to support Mavell vendor/product ID.

Signed-off-by: Jing Xiang <everxiang@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

8139cp: implement the missing dev->tx_timeout

Signed-off-by: Mika Lansirinne <mika.lansirinne@stonesoft.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

myri10ge: Remove nonsensical limit in the tx done routine

Remove nonsensical limit in the tx done routine. Specifically,
the loop will always terminate after processing <= 1 rings worth
of frames, as the mcp index is not refetched, so the removed
conditional could never be true.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

gianfar: kill unused header

A long time ago we used OCP with the gianfar driver.  Eventually when
we kill arch/ppc including this will cause issues so lets just kill it now.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

EP93XX_ETH must select MII

CONFIG_EP93XX_ETH=y, CONFIG_MII=n results in an obvious link error.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

macb: Add multicast capability

Add multicast capability to Atmel ethernet macb driver.

Signed-off-by: Patrice Vilchez <patrice.vilchez@rfo.atmel.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

macb: Use generic PHY layer

Convert the macb driver to use the generic PHY layer in
drivers/net/phy.

Signed-off-by: Frederic RODO <f.rodo@til-technologies.fr>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

s390: add barriers to qeth driver

Add barrier to loop where atomic variable is evaluated.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

s390: scatter-gather for inbound traffic in qeth driver

For large incoming packets > PAGE_SIZE/2 qeth creates a fragmented skb
by adding pointers to qdio pages to the fragment list of the skb.
This avoids allocating big chunks of consecutive memory. Also copying
data from the qdio buffer to the skb is economized.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

eHEA: Introducing support vor DLPAR memory add

This patch adds support for DLPAR memory add to the eHEA driver. To detect
whether memory was added the driver uses its own memory mapping table and
checks for kernel addresses whether they're located in already known memory
sections. If not the function ehea_rereg_mrs() is triggered which performs
a rebuild of the mapping table and a re-registration of the global memory
region.

Signed-off-by: Thomas Klein <tklein@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'upstream-jgarzik' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream

Fix a potential NULL pointer dereference in free_shared_mem() in drivers/net/s2io.c

This patch fixes a potential null dereference bug where we dereference
nic before a null check. This patch simply moves the dereferencing
after the null check.

Signed-off-by: Micah Gruber < micah.gruber@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Revert "[NET]: Fix races in net_rx_action vs netpoll."

This reverts commit 29578624e354f56143d92510fff33a8b2aaa2c03.

Ingo Molnar reports complete breakage with his e1000 card (no
networking, card reports transmit timeouts), and bisected it down to
this commit.  Let's figure out what went wrong, but not keep breaking
machines until we do.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Olaf Kirch <olaf.kirch@oracle.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'drm-patches' of ssh:///linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: remove core typedefs from the ioc32 wrappers
  drm: remove sarea typedefs
  drm: detypedef the hashtab and more of sman
  drm: de-typedef sman
  drm: detypedeffing continues...
  drm: detypef waitlist/freelist/buf_entry/device_dma/drm_queue structs
  drm: drop drm_vma_entry_t, drm_magic_entry_t
  drm: drop drm_buf_t typedef
  drm: fixup other drivers for typedef removals
  drm: remove drm_file_t, drm_device_t and drm_head_t typedefs
  drm: remove a bunch of typedefs on the userspace interface
  r300: updates register header
  radeon: add support for vblank on crtc2
  drm: cleanup list initialisation
  drm: fix typo on code drm getsarea
  drm: remove DRM_GETSAREA and replace with drm_getsarea function
  drm: cleanup use of Linux list handling macros

utime(s): Honour CAP_FOWNER when times==NULL

do_utimes() does not honour CAP_FOWNER when times==NULL.
Trivial and obvious one-line fix.

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix too few arguments to function `scsi_cmd_ioctl'

This corrects the following compile error introduced by the merge of the
new bsg layer in commit e245befce7af0a1e1347079ed62695b059594bd4:

  caglar@zangetsu linux-2.6 $ make
    CHK     include/linux/version.h
    CHK     include/linux/utsrelease.h
    CALL    scripts/checksyscalls.sh
    CHK     include/linux/compile.h
    LD      drivers/block/built-in.o
    CC [M]  drivers/block/cciss.o
  drivers/block/cciss.c: In function `cciss_ioctl':
  drivers/block/cciss.c:1173: warning: passing arg 2 of `scsi_cmd_ioctl' from incompatible pointer type
  drivers/block/cciss.c:1173: warning: passing arg 3 of `scsi_cmd_ioctl' makes pointer from integer without a cast
  drivers/block/cciss.c:1173: warning: passing arg 4 of `scsi_cmd_ioctl' makes integer from pointer without a cast
  drivers/block/cciss.c:1173: error: too few arguments to function `scsi_cmd_ioctl'
  ...
  make[2]: *** [drivers/block/cciss.o] Hata 1
  make[1]: *** [drivers/block] Hata 2
  make: *** [drivers] Hata 2

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix LDM for new field in the VOL5 VBLK.

Teach LDM about a new field encountered with Windows Vista.

This fixes LDM for people using Vista who have disabled drive letter
assignment from one or more volumes.  Doing this introduces a so far
unknown field in the LDM database in the VOL5 VBLK structure which
causes the LDM driver to fail to parse the VBLK structure and hence LDM
fails to parse the disk altogether.  This patch teaches the driver about
this field.

Thanks got to Ashton Mills <amills@iinet.com.au> for reporting the
problem and working with me on getting it fixed.  It is now working for
him.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
CC: Richard Russon <ldm@flatcap.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove duplicate comments from sysctl.c

Randy Dunlap noticed that the recent comment clarifications from Andrew
had somehow gotten duplicated.  Quoth Andrew: "hm, that could have been
some late-night reject-fixing."

Fix it up.

Cc: From: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix new generic block device SG compile

We had a merge issue with the "dentry" field going away from the
kobject, and being replaced by a sysfs_dirent field (named "sd")
instead.  That broke the BSG compile.

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  [PATCH] sched: fix up fs/proc/array.c whitespace problems
  [PATCH] sched: prettify prio_to_wmult[]
  [PATCH] sched: document prio_to_wmult[]
  [PATCH] sched: improve weight-array comments
  [PATCH] sched: remove dead code from task_stime()

Fixed up trivial conflict in fs/proc/array.c

Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (32 commits)
  [PATCH] ocfs2: zero_user_page conversion
  ocfs2: Support xfs style space reservation ioctls
  ocfs2: support for removing file regions
  ocfs2: update truncate handling of partial clusters
  ocfs2: btree support for removal of arbirtrary extents
  ocfs2: Support creation of unwritten extents
  ocfs2: support writing of unwritten extents
  ocfs2: small cleanup of ocfs2_write_begin_nolock()
  ocfs2: btree changes for unwritten extents
  ocfs2: abstract btree growing calls
  ocfs2: use all extent block suballocators
  ocfs2: plug truncate into cached dealloc routines
  ocfs2: simplify deallocation locking
  ocfs2: harden buffer check during mapping of page blocks
  ocfs2: shared writeable mmap
  ocfs2: factor out write aops into nolock variants
  ocfs2: rework ocfs2_buffered_write_cluster()
  ocfs2: take ip_alloc_sem during entire truncate
  ocfs2: Add "preferred slot" mount option
  [KJ PATCH] Replacing memset(<addr>,0,PAGE_SIZE) with clear_page() in fs/ocfs2/dlm/dlmrecovery.c
  ...

Merge branch 'bsg' of git://git.kernel.dk/data/git/linux-2.6-block

* 'bsg' of git://git.kernel.dk/data/git/linux-2.6-block: (25 commits)
  bsg: Kconfig updates
  bsg: add SCSI transport-level request support
  bsg: add bidi support
  add a struct request pointer to the request structure
  bsg: fix the deadlock on discarding done commands
  bsg: fix a blocking read bug
  bsg: minor bug fixes
  improve bsg device allocation
  bind bsg to all SCSI devices
  bsg: bind bsg to request_queue instead of gendisk
  bsg: add a request_queue argument to scsi_cmd_ioctl()
  bsg: simplify __bsg_alloc_command failpath
  bsg: add cheasy error checks for sysfs stuff
  Add queue resizing support
  Replace s32, u32 and u64 with __s32, __u32 and __u64 in bsg.h for userspace
  bsg: silence a bogus gcc warning
  bsg: style cleanup
  bsg: use u32 etc instead of uint32_t
  bsg: add SG_IO to SG v4
  bsg: replace SG v3 with SG v4
  ...

Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  splice: direct splicing updates ppos twice
  more ACSI removal
  umem: Fix match of pci_ids in umem driver
  umem: Remove references to dead CONFIG_MM_MAP_MEMORY variable
  remove the documentation for the legacy CDROM drivers

Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (26 commits)
  [SPARC64]: Fix UP build.
  [SPARC64]: dr-cpu unconfigure support.
  [SERIAL]: Fix console write locking in sparc drivers.
  [SPARC64]: Give more accurate errors in dr_cpu_configure().
  [SPARC64]: Clear cpu_{core,sibling}_map[] in smp_fill_in_sib_core_maps()
  [SPARC64]: Fix leak when DR added cpu does not bootup.
  [SPARC64]: Add ->set_affinity IRQ handlers.
  [SPARC64]: Process dr-cpu events in a kthread instead of workqueue.
  [SPARC64]: More sensible udelay implementation.
  [SPARC64]: SMP build fixes.
  [SPARC64]: mdesc.c needs linux/mm.h
  [SPARC64]: Fix build regressions added by dr-cpu changes.
  [SPARC64]: Unconditionally register vio_bus_type.
  [SPARC64]: Initial LDOM cpu hotplug support.
  [SPARC64]: Fix setting of variables in LDOM guest.
  [SPARC64]: Fix MD property lifetime bugs.
  [SPARC64]: Abstract out mdesc accesses for better MD update handling.
  [SPARC64]: Use more mearningful names for IRQ registry.
  [SPARC64]: Initial domain-services driver.
  [SPARC64]: Export powerd facilities for external entities.
  ...

Merge /pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (68 commits)
  sh: sh-rtc support for SH7709.
  sh: Revert __xdiv64_32 size change.
  sh: Update r7785rp defconfig.
  sh: Export div symbols for GCC 4.2 and ST GCC.
  sh: fix race in parallel out-of-tree build
  sh: Kill off dead mach.c for hp6xx.
  sh: hd64461.h cleanup and added comments.
  sh: Update the alignment when 4K stacks are used.
  sh: Add a .bss.page_aligned section for 4K stacks.
  sh: Don't let SH-4A clobber SH-4 CFLAGS.
  sh: Add parport stub for SuperIO ports.
  sh: Drop -Wa,-dsp for DSP tuning.
  sh: Update dreamcast defconfig.
  fb: pvr2fb: A few more __devinit annotations for PCI.
  fb: pvr2fb: Fix up section mismatch warnings.
  sh: Select IPR-IRQ for SH7091.
  sh: Correct __xdiv64_32/div64_32 return value size.
  sh: Fix timer-tmu build for SH-3.
  sh: Add cpu and mach links to CLEAN_FILES.
  sh: Preliminary support for the SH-X3 CPU.
  ...

fat: Fix the race of read/write the FAT12 entry

FAT12 entry is 12bits, so it needs 2 phase to update the value.  And
writer and reader access it without any lock, so reader can get the
half updated value.

This fixes the long standing race condition by adding a global
spinlock to only FAT12 for avoiding any impact against FAT16/32.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpwatchdog build fix

sparc64:

drivers/sbus/char/cpwatchdog.c: In function `wd_toggleintr':
drivers/sbus/char/cpwatchdog.c:523: error: implicit declaration of function `readb'
drivers/sbus/char/cpwatchdog.c:533: error: implicit declaration of function `writeb'
drivers/sbus/char/cpwatchdog.c: In function `wd_pingtimer':
drivers/sbus/char/cpwatchdog.c:545: error: implicit declaration of function `readw'
drivers/sbus/char/cpwatchdog.c: In function `wd_starttimer':
drivers/sbus/char/cpwatchdog.c:584: error: implicit declaration of function `writew'
drivers/sbus/char/cpwatchdog.c: In function `wd_init':
drivers/sbus/char/cpwatchdog.c:767: error: implicit declaration of function `ioremap'
drivers/sbus/char/cpwatchdog.c:767: warning: assignment makes pointer from integer without a cast
drivers/sbus/char/cpwatchdog.c: In function `wd_cleanup':
drivers/sbus/char/cpwatchdog.c:849: error: implicit declaration of function `iounmap'

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sn_console section mismatch warning

Do not mark sn_sal_console_setup as __init since it's referenced from
non init data structures.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

compat32: ignore the LOOP_CLR_FD ioctl

compat32: Ignore the LOOP_CLR_FD ioctl for the loop block device, to kill an
annoying kernel message when e.g. busybox umount is used.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NLS: Remove obsolete Makefile entries

Since the corresponding source files no longer exist, remove the
irrelevant Makefile entries for them.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

permit mempool_free(NULL)

Christian Borntraeger points out that mempool_free() doesn't noop when
handed NULL.  This is inconsistent with the other free-like functions
in the kernel.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: statfs speed up

This is a patch that speeds up statfs.  It is very simple - the "overhead"
calculation, which takes a huge amount of time for large filesystems, never
changes unless the size of the filesystem itself changes.  That means we can
store it in memory and only recalculate if the filesystem has been resized
(almost never).

It also fixes a minor problem that we never update the on-disk superblock free
blocks/inodes counts until the filesystem is unmounted.  While not fatal, we
may as well update that on disk when we have the information, and it makes
things like debugfs and dumpe2fs report a bit more accurate info.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext3: statfs speed up

This is a patch that speeds up statfs.  It is very simple - the "overhead"
calculation, which takes a huge amount of time for large filesystems, never
changes unless the size of the filesystem itself changes.  That means we can
store it in memory and only recalculate if the filesystem has been resized
(almost never).

It also fixes a minor problem that we never update the on-disk superblock free
blocks/inodes counts until the filesystem is unmounted.  While not fatal, we
may as well update that on disk when we have the information, and it makes
things like debugfs and dumpe2fs report a bit more accurate info.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: statfs speed up

This is a patch that speeds up statfs.  It is very simple - the "overhead"
calculation, which takes a huge amount of time for large filesystems, never
changes unless the size of the filesystem itself changes.  That means we can
store it in memory and only recalculate if the filesystem has been resized
(almost never).

It also fixes a minor problem that we never update the on-disk superblock free
blocks/inodes counts until the filesystem is unmounted.  While not fatal, we
may as well update that on disk when we have the information, and it makes
things like debugfs and dumpe2fs report a bit more accurate info.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/ipmi/ipmi_si_intf.c: lower printk severity

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/ipmi/ipmi_poweroff.c: lower printk severity

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vsprintf.c: optimizing, part 2: base 10 conversion speedup, v2

Optimize integer-to-string conversion in vsprintf.c for base 10.  This is
by far the most used conversion, and in some use cases it impacts
performance.  For example, top reads /proc/$PID/stat for every process, and
with 4000 processes decimal conversion alone takes noticeable time.

Using code from

http://www.cs.uiowa.edu/~jones/bcd/decimal.html
(with permission from the author, Douglas W. Jones)

binary-to-decimal-string conversion is done in groups of five digits at
once, using only additions/subtractions/shifts (with -O2; -Os throws in
some multiply instructions).

On i386 arch gcc 4.1.2 -O2 generates ~500 bytes of code.

This patch is run tested. Userspace benchmark/test is also attached.
I tested it on PIII and AMD64 and new code is generally ~2.5 times
faster. On AMD64:

# ./vsprintf_verify-O2
Original decimal conv: .......... 151 ns per iteration
Patched decimal conv:  .......... 62 ns per iteration
Testing correctness
12895992590592 ok...        [Ctrl-C]
# ./vsprintf_verify-O2
Original decimal conv: .......... 151 ns per iteration
Patched decimal conv:  .......... 62 ns per iteration
Testing correctness
26025406464 ok...        [Ctrl-C]

More realistic test: top from busybox project was modified to
report how many us it took to scan /proc (this does not account
any processing done after that, like sorting process list),
and then I test it with 4000 processes:

#!/bin/sh
i=4000
while test $i != 0; do
    sleep 30 &
    let i--
done
busybox top -b -n3 >/dev/null

on unpatched kernel:

top: 4120 processes took 102864 microseconds to scan
top: 4120 processes took 91757 microseconds to scan
top: 4120 processes took 92517 microseconds to scan
top: 4120 processes took 92581 microseconds to scan

on patched kernel:

top: 4120 processes took 75460 microseconds to scan
top: 4120 processes took 66451 microseconds to scan
top: 4120 processes took 67267 microseconds to scan
top: 4120 processes took 67618 microseconds to scan

The speedup comes from much faster generation of /proc/PID/stat
by sprintf() calls inside the kernel.

Signed-off-by: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vsprintf.c: optimizing, part 1 (easy and obvious stuff)

* There is no point in having full "0...9a...z" constant vector,
  if we use only "0...9a...f" (and "x" for "0x").

* Post-decrement usually needs a few more instructions, so use
  pre decrement instead where makes sense:
-       while (i < precision--) {
+       while (i <= --precision) {

* if base != 10 (=> base 8 or 16), we can avoid using division
  in a loop and use mask/shift, obtaining much faster conversion.
  (More complex optimization for base 10 case is in the second patch).

Overall, size vsprintf.o shows ~80 bytes smaller text section
with this patch applied.

Signed-off-by: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix trivial typos in anon_inodes.c comments

Trivial typo and grammar fixes.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isapnp: remove pointless check of 'type' against 0 in isapnp_read_tag()

In drivers/pnp/isapnp/core.c::isapnp_read_tag() there is a test of 'type'
being == 0 a bit down in the function.  That test doesn't make any sense.
If 'type' could indeed be NULL, then the test happens way too late as we'd
already have tried to dereference the pointer earlier and looking at the
callers it also turns out that there is no way type can ever actually be
NULL.

So the test is completely pointless and should just be removed.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

.gitignore update

headers_install by default puts headers into usr/include/ .
They're auto-generated, so should be ignored.

Same for *.orig, *.rej .

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove mm/backing-dev.c:congestion_wait_interruptible()

congestion_wait_interruptible() is no longer used.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/printk.c: document possible deadlock against scheduler

kernel/printk.c: document possible deadlock against scheduler

The printk's comment states that it can be called from every context,
which might lead to false illusion that it could be called from everywhere
without any restrictions.

This is however not true - a call to printk() could deadlock if called from
scheduler code (namely from schedule(), wake_up(), etc) on runqueue lock
when it tries to wake up klogd. Document this.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: static initialization of spinlocks is OK

Static initialization of spinlocks is preferable to dynamic initialization
when it is practical.  This patch updates documentation for consistency
with comments in spinlock_types.h.

Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: remove termios checks from various old char serial drivers

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

68360serial: remove broken optimisation

Remove the broken 'no termios change' optimisation for this driver.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

synclink: remove bogus 'no change' termios optimisation from synclink drivers

Again this check is wrong now, and un-needed

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

genericserial: remove bogus optimisation check and dead code paths

We've been using the 'new locking' for a long time now so it seems
pointless keeping the old one around.  Remove it and undo the macros it
uses back into real code for readability.  Remove the bogus 'no termios
change' checks.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Morten Helgesen <morten@sourcepoet.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amiserial: remove incorrect 'no termios change' check

Lots of serial drivers check and optimise for setting the termios values to
the ones they were before.  This is pointless and the check is wrong
anyway.  Remove the checks on the serial drivers.  If we ever do need such
a check put it back in the tty layer instead _once_!

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

modules: remove modlist_lock

Now we always use stop_machine for module insertion or deletion, we no
longer need the modlist_lock: merely disabling preemption is sufficient to
block against list manipulation.  This avoids deadlock on OOPSen where we
can potentially grab the lock twice.

Bug: 8695
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tobias Oed <tobiasoed@hotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: fix error handling in ext4_create_journal

Fix error handling in ext4_create_journal according to kernel conventions.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext3: fix error handling in ext3_create_journal()

Fix error handling in ext3_create_journal according to kernel conventions.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

make cancel_xxx_work_sync() return a boolean

Change cancel_work_sync() and cancel_delayed_work_sync() to return a boolean
indicating whether the work was actually cancelled.  A zero return value means
that the work was not pending/queued.

Without that kind of change it is not possible to avoid flush_workqueue()
sometimes, see the next patch as an example.

Also, this patch unifies both functions and kills the (unlikely) busy-wait
loop.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rename cancel_rearming_delayed_work() to cancel_delayed_work_sync()

Imho, the current naming of cancel_xxx workqueue functions is very confusing.

cancel_delayed_work()
cancel_rearming_delayed_work()
cancel_rearming_delayed_workqueue() // obsolete

cancel_work_sync()

This looks as if the first 2 functions differ in "type" of their argument
which is not true any longer, nowadays the difference is the behaviour.

The semantics of cancel_rearming_delayed_work(dwork) was changed
significantly, it doesn't require that dwork rearms itself, and cancels dwork
synchronously.

Rename it to cancel_delayed_work_sync().  This matches cancel_delayed_work()
and cancel_work_sync().  Re-create cancel_rearming_delayed_work() as a simple
inline obsolete wrapper, like cancel_rearming_delayed_workqueue().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

update Documentation/filesystems/vfs.txt

Update Documentation/filesystems/vfs.txt

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the last few UMSDOS leftovers

The UMSDOS filesystem was removed back in 2.6.11, but some tiny bits stuck
around.  This patch removes the few remaining leftovers.  The only things
left behind after this are the entries in the CREDITS file and the ioctl
number in Documentation/ioctl-number.txt as documentation.

This third (hopefully final) version of the patch doesn't edit the
arch/um/config.release file, since Jeff Dike pointed out to me that it
should die completely, and asked me to remove it from my patch as he'll
send in a seperate patch removing the file completely.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add missing files and dirs to 00-INDEX in Documentation/

Add descriptions for a number of missing files and directories to the
Documentation/00-INDEX file.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma: make dma pool to use kmalloc_node

Using dev_to_node(&dev->dev) to get node, and kmalloc_node to dma buffer on
corresponding node dma pool

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

UDF: fix function name from udf_crc16 to udf_crc

We have to change udf_crc16() name to udf_crc() to be able to play with CRC
test.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

generic bug: use show_regs() instead of dump_stack()

The current generic bug implementation has a call to dump_stack() in case a
WARN_ON(whatever) gets hit.  Since report_bug(), which calls dump_stack(),
gets called from an exception handler we can do better: just pass the
pt_regs structure to report_bug() and pass it to show_regs() in case of a
warning.  This will give more debug informations like register contents,
etc...  In addition this avoids some pointless lines that dump_stack()
emits, since it includes a stack backtrace of the exception handler which
is of no interest in case of a warning.  E.g.  on s390 the following lines
are currently always present in a stack backtrace if dump_stack() gets
called from report_bug():

 [<000000000001517a>] show_trace+0x92/0xe8)
 [<0000000000015270>] show_stack+0xa0/0xd0
 [<00000000000152ce>] dump_stack+0x2e/0x3c
 [<0000000000195450>] report_bug+0x98/0xf8
 [<0000000000016cc8>] illegal_op+0x1fc/0x21c
 [<00000000000227d6>] sysc_return+0x0/0x10

Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add -Werror-implicit-function-declaration

Add -Werror-implicit-function-declaration
This makes builds fail sooner if something is implicitly defined instead
of having to wait half an hour for it to fail at the linking stage.

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uninline check_signature()

This is a rather bizarre thing to have inlined in io.h.  Stick it in lib/
instead.

While we're there, despaghetti it a bit, and fix its off-by-one behaviour when
passed a zero length.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CodingStyle: add information about editor modelines

I recently received a patch including a file that had a vim modeline,
and I realized that nothing specifically proscribed that practice.

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CodingStyle: add information about trailing whitespace

Signed-off-by: Josh Triplett <josh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

is_power_of_2: ufs/super.c

Replace (n & (n-1)) with is_power_of_2

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Acked-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parport_pc: it887x fix

The IO port range requested by parport_pc.c:sio_ite_8872_probe is too small.
The IO-ports of ttyS1 (0x2f8) will be missconfigured by the ITE-chip.  The ITE
starts looking for the chip a 0x2a0.  An IO-portrange of 32 will not overwrite
the ports of ttyS1.  Therefore register 0x60 should be written with
0xe5000000, enabling the ITE and setting IO-portsize to 32 bytes.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

is_power_of_2: kernel/kfifo.c

Replace (n & (n-1)) with is_power_of_2()

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

make seccomp zerocost in schedule

This follows a suggestion from Chuck Ebbert on how to make seccomp
absolutely zerocost in schedule too.  The only remaining footprint of
seccomp is in terms of the bzImage size that becomes a few bytes (perhaps
even a few kbytes) larger, measure it if you care in the embedded.

Signed-off-by: Andrea Arcangeli <andrea@cpushare.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

move seccomp from /proc to a prctl

This reduces the memory footprint and it enforces that only the current
task can enable seccomp on itself (this is a requirement for a
strightforward [modulo preempt ;) ] TIF_NOTSC implementation).

Signed-off-by: Andrea Arcangeli <andrea@cpushare.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nbd.c: sock_xmit: cleanup signal related code

sock_xmit() re-implements sigprocmask() and dequeue_signal_lock().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kcdrwd: remove unneeded flush_signals() call

kcdrwd() is a kernel thread, all signals are ignored.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

adb_probe_task: remove unneeded flush_signals() call

adb_probe_task() is forked by "events" thread, all signals are ignored, no
need to play with signal blocking/flushing.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>