openwrt/staging/blogic.git
13 years agonet: do not take an additional reference in skb_frag_set_page
Ian Campbell [Tue, 18 Oct 2011 22:55:11 +0000 (22:55 +0000)]
net: do not take an additional reference in skb_frag_set_page

I audited all of the callers in the tree and only one of them (pktgen) expects
it to do so. Taking this reference is pretty obviously confusing and error
prone.

In particular I looked at the following commits which switched callers of
(__)skb_frag_set_page to the skb paged fragment api:

6a930b9f163d7e6d9ef692e05616c4ede65038ec cxgb3: convert to SKB paged frag API.
5dc3e196ea21e833128d51eb5b788a070fea1f28 myri10ge: convert to SKB paged frag API.
0e0634d20dd670a89af19af2a686a6cce943ac14 vmxnet3: convert to SKB paged frag API.
86ee8130a46769f73f8f423f99dbf782a09f9233 virtionet: convert to SKB paged frag API.
4a22c4c919c201c2a7f4ee09e672435a3072d875 sfc: convert to SKB paged frag API.
18324d690d6a5028e3c174fc1921447aedead2b8 cassini: convert to SKB paged frag API.
b061b39e3ae18ad75466258cf2116e18fa5bbd80 benet: convert to SKB paged frag API.
b7b6a688d217936459ff5cf1087b2361db952509 bnx2: convert to SKB paged frag API.
804cf14ea5ceca46554d5801e2817bba8116b7e5 net: xfrm: convert to SKB frag APIs
ea2ab69379a941c6f8884e290fdd28c93936a778 net: convert core to skb paged frag APIs

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoneigh: fix rcu splat in neigh_update()
roy.qing.li@gmail.com [Mon, 17 Oct 2011 22:32:42 +0000 (22:32 +0000)]
neigh: fix rcu splat in neigh_update()

when use dst_get_neighbour to get neighbour, we need
rcu_read_lock to protect, since dst_get_neighbour uses
rcu_dereference.

The bug was reported by Ari Savolainen <ari.m.savolainen@gmail.com>

[  105.612095]
[  105.612096] ===================================================
[  105.612100] [ INFO: suspicious rcu_dereference_check() usage. ]
[  105.612101] ---------------------------------------------------
[  105.612103] include/net/dst.h:91 invoked rcu_dereference_check()
without protection!
[  105.612105]
[  105.612106] other info that might help us debug this:
[  105.612106]
[  105.612108]
[  105.612108] rcu_scheduler_active = 1, debug_locks = 0
[  105.612110] 1 lock held by dnsmasq/2618:
[  105.612111]  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff815df8c7>]
rtnl_lock+0x17/0x20
[  105.612120]
[  105.612121] stack backtrace:
[  105.612123] Pid: 2618, comm: dnsmasq Not tainted 3.1.0-rc1 #41
[  105.612125] Call Trace:
[  105.612129]  [<ffffffff810ccdcb>] lockdep_rcu_dereference+0xbb/0xc0
[  105.612132]  [<ffffffff815dc5a9>] neigh_update+0x4f9/0x5f0
[  105.612135]  [<ffffffff815da001>] ? neigh_lookup+0xe1/0x220
[  105.612139]  [<ffffffff81639298>] arp_req_set+0xb8/0x230
[  105.612142]  [<ffffffff8163a59f>] arp_ioctl+0x1bf/0x310
[  105.612146]  [<ffffffff810baa40>] ? lock_hrtimer_base.isra.26+0x30/0x60
[  105.612150]  [<ffffffff8163fb75>] inet_ioctl+0x85/0x90
[  105.612154]  [<ffffffff815b5520>] sock_do_ioctl+0x30/0x70
[  105.612157]  [<ffffffff815b55d3>] sock_ioctl+0x73/0x280
[  105.612162]  [<ffffffff811b7698>] do_vfs_ioctl+0x98/0x570
[  105.612165]  [<ffffffff811a5c40>] ? fget_light+0x340/0x3a0
[  105.612168]  [<ffffffff811b7bbf>] sys_ioctl+0x4f/0x80
[  105.612172]  [<ffffffff816fdcab>] system_call_fastpath+0x16/0x1b

Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: RongQing <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agofilter: use unsigned int to silence static checker warning
Dan Carpenter [Mon, 17 Oct 2011 21:04:20 +0000 (21:04 +0000)]
filter: use unsigned int to silence static checker warning

This is just a cleanup.

My testing version of Smatch warns about this:
net/core/filter.c +380 check_load_and_stores(6)
warn: check 'flen' for negative values

flen comes from the user.  We try to clamp the values here between 1
and BPF_MAXINSNS but the clamp doesn't work because it could be
negative.  This is a bug, but it's not exploitable.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoNET: asix: fix ethtool -e for AX88178 USB dongle
Grant Grundler [Mon, 17 Oct 2011 05:51:06 +0000 (05:51 +0000)]
NET: asix: fix ethtool -e for AX88178 USB dongle

"ethtool -e ethX" dumps EEPROM data. Patch sets EEPROM length for device.
Ethtool works alot better when the kernel believes the length is > 0.

From: Allan Chou <allan@asix.com.tw>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocleanup: remove unnecessary include.
Kevin Wilson [Sun, 16 Oct 2011 05:21:57 +0000 (05:21 +0000)]
cleanup: remove unnecessary include.

This cleanup patch removes unnecessary include from net/ipv6/ip6_fib.c.

Signed-off-by: Kevin Wilson <wkevils@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4: compat_ioctl is local to af_inet.c, make it static
Gerrit Renker [Sat, 15 Oct 2011 09:26:56 +0000 (09:26 +0000)]
ipv4: compat_ioctl is local to af_inet.c, make it static

ipv4: compat_ioctl is local to af_inet.c, make it static

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agostmmac: limit max_mtu in case of 4KiB and use __netdev_alloc_skb (V2)
Giuseppe CAVALLARO [Tue, 18 Oct 2011 01:39:55 +0000 (01:39 +0000)]
stmmac: limit max_mtu in case of 4KiB and use __netdev_alloc_skb (V2)

Problem using big mtu around 4096 bytes is you end allocating (4096
+NET_SKB_PAD + NET_IP_ALIGN + sizeof(struct skb_shared_info) bytes ->
8192 bytes : order-1 pages

It's better to limit the mtu to SKB_MAX_HEAD(NET_SKB_PAD),
to have no more than one page per skb.

Also the patch changes the netdev_alloc_skb_ip_align() done in
init_dma_desc_rings() and uses a variant allowing GFP_KERNEL allocations
allowing the driver to load even in case of memory pressure.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agostmmac: add CHAINED descriptor mode support (V4)
Giuseppe CAVALLARO [Tue, 18 Oct 2011 00:01:24 +0000 (00:01 +0000)]
stmmac: add CHAINED descriptor mode support (V4)

This patch enhances the STMMAC driver to support CHAINED mode of
descriptor.

STMMAC supports DMA descriptor to operate both in dual buffer(RING)
and linked-list(CHAINED) mode. In RING mode (default) each descriptor
points to two data buffer pointers whereas in CHAINED mode they point
to only one data buffer pointer.

In CHAINED mode each descriptor will have pointer to next descriptor in
the list, hence creating the explicit chaining in the descriptor itself,
whereas such explicit chaining is not possible in RING mode.

First version of this work has been done by Rayagond.
Then the patch has been reworked avoiding ifdef inside the C code.
A new header file has been added to define all the functions needed for
managing enhanced and normal descriptors.
In fact, these have to be specialized according to the ring/chain usage.
Two new C files have been also added to implement the helper routines
needed to manage: jumbo frames, chain and ring setup (i.e. desc3).

Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agostmmac: allow mmc usage only if feature actually available (V4)
Giuseppe CAVALLARO [Tue, 18 Oct 2011 00:01:23 +0000 (00:01 +0000)]
stmmac: allow mmc usage only if feature actually available (V4)

Enable the MMC support if it is actually available from the
HW capability register.

Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agostmmac: use predefined macros for HW cap register fields (V4)
Rayagond Kokatanur [Tue, 18 Oct 2011 00:01:22 +0000 (00:01 +0000)]
stmmac: use predefined macros for HW cap register fields (V4)

Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agostmmac: allow mtu bigger than 1500 in case of normal desc (V4)
Giuseppe CAVALLARO [Tue, 18 Oct 2011 00:01:21 +0000 (00:01 +0000)]
stmmac: allow mtu bigger than 1500 in case of normal desc (V4)

This patch allows to set the mtu bigger than 1500
in case of normal descriptors.
This is helping some SPEAr customers.

Signed-off-by: Deepak SIKRI <deepak.sikri@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agostmmac: update the driver version and doc (V4)
Giuseppe CAVALLARO [Tue, 18 Oct 2011 00:01:20 +0000 (00:01 +0000)]
stmmac: update the driver version and doc (V4)

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agostmmac: protect tx process with lock (V4)
Giuseppe CAVALLARO [Tue, 18 Oct 2011 00:01:19 +0000 (00:01 +0000)]
stmmac: protect tx process with lock (V4)

This patch fixes a problem raised on Orly ARM SMP platform
where, in case of fragmented frames, the descriptors
in the TX ring resulted broken. This was due to a missing lock
protection in the tx process.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agostmmac: Stop advertising 1000Base capabilties for non GMII iface (V4).
Srinivas Kandagatla [Tue, 18 Oct 2011 00:01:18 +0000 (00:01 +0000)]
stmmac: Stop advertising 1000Base capabilties for non GMII iface (V4).

This patch stops advertising 1000Base capablities if GMAC is either
configured for MII or RMII mode and on board there is a GPHY plugged on.
Without this patch if an GBit switch is connected on MII interface,
Ethernet stops working at all.

Discovered as part of
https://bugzilla.stlinux.com/show_bug.cgi?id=14148 triage

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosysfs: Reject with a warning invalid uses of tagged directories.
Eric W. Biederman [Wed, 12 Oct 2011 22:02:43 +0000 (22:02 +0000)]
sysfs: Reject with a warning invalid uses of tagged directories.

sysfs is a core piece of ifrastructure that many people use and
few people have all of the rules in their head on how to use
it correctly.  Add warnings for people using tagged directories
improperly to that any misuses can be caught and diagnosed quickly.

A single inexpensive test in sysfs_find_dirent is almost sufficient
to catch all possible misuses.  An additional warning is needed
in sysfs_add_dirent so that we actually fail when attempting to
add an untagged dirent in a tagged directory.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosysfs: Remove support for tagged directories with untagged members.
Eric W. Biederman [Wed, 12 Oct 2011 22:01:34 +0000 (22:01 +0000)]
sysfs: Remove support for tagged directories with untagged members.

Now that /sys/class/net/bonding_masters is implemented as a tagged sysfs
file we can remove support for untagged files in tagged directories.

This change removes any ambiguity of what a NULL namespace value
means.  A NULL namespace parameter after this patch means
that we are talking about an untagged sysfs dirent.

This makes the sysfs code much less prone to mistakes when during
maintenance.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobonding: Use a per netns implementation of /sys/class/net/bonding_masters.
Eric W. Biederman [Wed, 12 Oct 2011 21:56:25 +0000 (21:56 +0000)]
bonding: Use a per netns implementation of /sys/class/net/bonding_masters.

This fixes a network namespace misfeature that bonding_masters looked at
current instead of the remembering the context where in which
/sys/class/net/bonding_masters was opened in to see which network
namespace to act upon.

This removes the need for sysfs to handle tagged directories with
untagged members allowing for a conceptually simpler sysfs
implementation.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoclass: Implement support for class attrs in tagged sysfs directories.
Eric W. Biederman [Wed, 12 Oct 2011 21:55:08 +0000 (21:55 +0000)]
class: Implement support for class attrs in tagged sysfs directories.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosysfs: Implement support for tagged files in sysfs.
Eric W. Biederman [Wed, 12 Oct 2011 21:53:38 +0000 (21:53 +0000)]
sysfs: Implement support for tagged files in sysfs.

Looking up files in sysfs is hard to understand and analyize because we
currently allow placing untagged files in tagged directories.  In the
implementation of that we have two subtly different meanings of NULL.
NULL meaning there is no tag on a directory entry and NULL meaning
we don't care which namespace the lookup is performed for.  This
multiple uses of NULL have resulted in subtle bugs (since fixed)
in the code.

Currently it is only the bonding driver that needs to have an untagged
file in a tagged directory.

To untagle this mess I am adding support for tagged files to sysfs.
Modifying the bonding driver to implement bonding_masters as a tagged
file.  Registering bonding_masters once for each network namespace.
Then I am removing support for untagged entries in tagged sysfs
directories.

Resulting in code that is much easier to reason about.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobonding: fix wrong port enabling in 802.3ad
Flavio Leitner [Thu, 13 Oct 2011 07:21:23 +0000 (07:21 +0000)]
bonding: fix wrong port enabling in 802.3ad

The port shouldn't be enabled unless its current MUX
state is DISTRIBUTING which is correctly handled by
ad_mux_machine(), otherwise the packet sent can be
lost because the other end may not be ready.

The issue happens on every port initialization, but
as the ports are expected to move quickly to DISTRIBUTING,
it doesn't cause much problem.  However, it does cause
constant packet loss if the other peer has the port
configured to stay in STANDBY (i.e. SYNC set to OFF).

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: validate HWTSTAMP ioctl parameters
Richard Cochran [Wed, 19 Oct 2011 21:00:35 +0000 (17:00 -0400)]
net: validate HWTSTAMP ioctl parameters

This patch adds a sanity check on the values provided by user space for
the hardware time stamping configuration. If the values lie outside of
the absolute limits, then the ioctl request will be denied.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Move rcu_barrier from rollback_registered_many to netdev_run_todo.
Eric W. Biederman [Thu, 13 Oct 2011 22:25:23 +0000 (22:25 +0000)]
net: Move rcu_barrier from rollback_registered_many to netdev_run_todo.

This patch moves the rcu_barrier from rollback_registered_many
(inside the rtnl_lock) into netdev_run_todo (just outside the rtnl_lock).
This allows us to gain the full benefit of sychronize_net calling
synchronize_rcu_expedited when the rtnl_lock is held.

The rcu_barrier in rollback_registered_many was originally a synchronize_net
but was promoted to be a rcu_barrier() when it was found that people were
unnecessarily hitting the 250ms wait in netdev_wait_allrefs().  Changing
the rcu_barrier back to a synchronize_net is therefore safe.

Since we only care about waiting for the rcu callbacks before we get
to netdev_wait_allrefs() it is also safe to move the wait into
netdev_run_todo.

This was tested by creating and destroying 1000 tap devices and observing
/proc/lock_stat.  /proc/lock_stat reports this change reduces the hold
times of the rtnl_lock by a factor of 10.  There was no observable
difference in the amount of time it takes to destroy a network device.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: use TCP_INIT_CWND in tcp_fixup_sndbuf()
Eric Dumazet [Thu, 13 Oct 2011 18:24:42 +0000 (18:24 +0000)]
tcp: use TCP_INIT_CWND in tcp_fixup_sndbuf()

Initial cwnd being 10 (TCP_INIT_CWND) instead of 3, change
tcp_fixup_sndbuf() to get more than 16384 bytes (sysctl_tcp_wmem[1]) in
initial sk_sndbuf

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agophylib: Modify Vitesse RGMII skew settings
Andy Fleming [Thu, 13 Oct 2011 04:33:55 +0000 (04:33 +0000)]
phylib: Modify Vitesse RGMII skew settings

The Vitesse driver was using the RGMII_ID interface type to determine if
skew was necessary.  However, we want to move away from using that
interface type, as it's really a property of the board's PHY connection.
However, some boards depend on it, so we want to support it, while
allowing new boards to use the more flexible "fixups" approach.  To do
this, we extract the code which adds skew into its own function, and
call that function when RGMII_ID has been selected.

Another side-effect of this change is that if your PHY has skew set
already, it doesn't clear it.  This way, the fixup code can modify the
register without config_init then clearing it.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Allow skb_recycle_check to be done in stages
Andy Fleming [Thu, 13 Oct 2011 04:33:54 +0000 (04:33 +0000)]
net: Allow skb_recycle_check to be done in stages

skb_recycle_check resets the skb if it's eligible for recycling.
However, there are times when a driver might want to optionally
manipulate the skb data with the skb before resetting the skb,
but after it has determined eligibility.  We do this by splitting the
eligibility check from the skb reset, creating two inline functions to
accomplish that task.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomlx4_en: Updating driver version
Yevgeny Petrilin [Tue, 18 Oct 2011 01:51:36 +0000 (01:51 +0000)]
mlx4_en: Updating driver version

Driver version updated to 1.5.4.2

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomlx4_en: Adding rxhash support
Yevgeny Petrilin [Tue, 18 Oct 2011 01:51:24 +0000 (01:51 +0000)]
mlx4_en: Adding rxhash support

Moving to Toeplitz function in RSS calculation.
Reporting rxhash in skb.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomlx4_en: Recording rx queue for gro packets
Yevgeny Petrilin [Tue, 18 Oct 2011 01:51:09 +0000 (01:51 +0000)]
mlx4_en: Recording rx queue for gro packets

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomlx4_en: Checksum counters per ring
Yevgeny Petrilin [Tue, 18 Oct 2011 01:50:56 +0000 (01:50 +0000)]
mlx4_en: Checksum counters per ring

Not updating common counters from data path.
The checksum counters are per ring, summarizing them when collecting statistics.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomlx4_en: Controlling FCS header removal
Yevgeny Petrilin [Tue, 18 Oct 2011 01:50:42 +0000 (01:50 +0000)]
mlx4_en: Controlling FCS header removal

Canceling FCS removal where FW allows for better alignment
of incoming data.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomlx4: Fix vlan table overflow
Yevgeny Petrilin [Tue, 18 Oct 2011 01:50:29 +0000 (01:50 +0000)]
mlx4: Fix vlan table overflow

Prevent overflow when trying to register more Vlans then the Vlan table in
HW is configured to.
Need to take into acount that the first 2 entries are reserved.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocaif-hsi: Added recovery check of CA wake status.
Daniel Martensson [Thu, 13 Oct 2011 11:29:29 +0000 (11:29 +0000)]
caif-hsi: Added recovery check of CA wake status.

Added recovery check of CA wake status in case of wake up timeout.
Added check of CA wake status in case of wake down timeout.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocaif-hsi: Added sanity check for length of CAIF frames
Daniel Martensson [Thu, 13 Oct 2011 11:29:28 +0000 (11:29 +0000)]
caif-hsi: Added sanity check for length of CAIF frames

Added sanity check for length of CAIF frames, and tear down of
CAIF link-layer device upon protocol error.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocaif-hsi: Make inactivity timeout configurable.
Dmitry Tarnyagin [Thu, 13 Oct 2011 11:29:27 +0000 (11:29 +0000)]
caif-hsi: Make inactivity timeout configurable.

CAIF HSI uses a timer for inactivity. Upon timeout HSI-wake signaling
is initiated to allow power-down of the HSI block.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocaif-hsi: HSI-Platform device register and unregisters itself
Daniel Martensson [Thu, 13 Oct 2011 11:29:26 +0000 (11:29 +0000)]
caif-hsi: HSI-Platform device register and unregisters itself

Platform device is no longer removed from caif_hsi at shutdown.
The HSI-platform device must do it's own registration and unregistration.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocaif-hsi: Making read and writes asynchronous.
Daniel Martensson [Thu, 13 Oct 2011 11:29:25 +0000 (11:29 +0000)]
caif-hsi: Making read and writes asynchronous.

Some platforms do not allow to put HSI block into low-power
mode when FIFO is not empty. The patch flushes (by reading)
FIFO at wake down sequence. Asynchronous read and write is
implemented for that. As a side effect this will also greatly
improve performance.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocaif-hsi: Fix for wakeup condition problem
Dmitry Tarnyagin [Thu, 13 Oct 2011 11:29:24 +0000 (11:29 +0000)]
caif-hsi: Fix for wakeup condition problem

Under stressed conditions a race could happen when del_timer_sync() was called
from softirq context at the same time when mod_timer_pending() for the same
timer was called from the workqueue. This leaded to a state mismatch in the
CAIF HSI driver and following unexpected link wakeup procedure.

The fix puts del_timer_sync() and mod_timer_pending() calls under a spin lock
to protect against the race condition.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocaif-hsi: Fixing a race condition in the caif_hsi code
Dmitry Tarnyagin [Thu, 13 Oct 2011 11:29:23 +0000 (11:29 +0000)]
caif-hsi: Fixing a race condition in the caif_hsi code

cfhsi->tx_state was not protected by a spin lock. TX soft-irq could interrupt
cfhsi_tx_done_work work leading to inconsistent state of the driver.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocaif-hsi: HSI Fix uninitialized data in HSI header
sjur.brandeland@stericsson.com [Thu, 13 Oct 2011 11:29:22 +0000 (11:29 +0000)]
caif-hsi: HSI Fix uninitialized data in HSI header

CAIF HSI header may be uninitialized and cause last message to
be repeated if transmit size is ~86 bytes long.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: add skb frag size accessors
Eric Dumazet [Tue, 18 Oct 2011 21:00:24 +0000 (21:00 +0000)]
net: add skb frag size accessors

To ease skb->truesize sanitization, its better to be able to localize
all references to skb frags size.

Define accessors : skb_frag_size() to fetch frag size, and
skb_frag_size_{set|add|sub}() to manipulate it.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoxfrm6: Don't call icmpv6_send on local error
Steffen Klassert [Tue, 11 Oct 2011 01:44:30 +0000 (01:44 +0000)]
xfrm6: Don't call icmpv6_send on local error

Calling icmpv6_send() on a local message size error leads to
an incorrect update of the path mtu. So use xfrm6_local_rxpmtu()
to notify about the pmtu if the IPV6_DONTFRAG socket option is
set on an udp or raw socket, according RFC 3542 and use
ipv6_local_error() otherwise.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv6: Fix IPsec slowpath fragmentation problem
Steffen Klassert [Tue, 11 Oct 2011 01:43:33 +0000 (01:43 +0000)]
ipv6: Fix IPsec slowpath fragmentation problem

ip6_append_data() builds packets based on the mtu from dst_mtu(rt->dst.path).
On IPsec the effective mtu is lower because we need to add the protocol
headers and trailers later when we do the IPsec transformations. So after
the IPsec transformations the packet might be too big, which leads to a
slowpath fragmentation then. This patch fixes this by building the packets
based on the lower IPsec mtu from dst_mtu(&rt->dst) and adapts the exthdr
handling to this.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv6: Remove superfluous NULL pointer check in ipv6_local_rxpmtu
Steffen Klassert [Tue, 11 Oct 2011 02:01:02 +0000 (02:01 +0000)]
ipv6: Remove superfluous NULL pointer check in ipv6_local_rxpmtu

The pointer to mtu_info is taken from the common buffer
of the skb, thus it can't be a NULL pointer. This patch
removes this check on mtu_info.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoxfrm: Simplify the replay check and advance functions
Steffen Klassert [Tue, 11 Oct 2011 01:58:37 +0000 (01:58 +0000)]
xfrm: Simplify the replay check and advance functions

The replay check and replay advance functions had some code
duplications. This patch removes the duplications.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/phy: extra delay only for RGMII interfaces for IC+ IP 1001
Giuseppe CAVALLARO [Mon, 10 Oct 2011 21:37:56 +0000 (21:37 +0000)]
net/phy: extra delay only for RGMII interfaces for IC+ IP 1001

The extra delay of 2ns to adjust RX clock phase is actually needed
in RGMII mode. Tested on the HDK7108 (STx7108c2).

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: allow vlan traffic to be received under bond
John Fastabend [Mon, 10 Oct 2011 09:16:41 +0000 (09:16 +0000)]
net: allow vlan traffic to be received under bond

The following configuration used to work as I expected. At least
we could use the fcoe interfaces to do MPIO and the bond0 iface
to do load balancing or failover.

       ---eth2.228-fcoe
       |
eth2 -----|
          |
          |---- bond0
          |
eth3 -----|
       |
       ---eth3.228-fcoe

This worked because of a change we added to allow inactive slaves
to rx 'exact' matches. This functionality was kept intact with the
rx_handler mechanism. However now the vlan interface attached to the
active slave never receives traffic because the bonding rx_handler
updates the skb->dev and goto's another_round. Previously, the
vlan_do_receive() logic was called before the bonding rx_handler.

Now by the time vlan_do_receive calls vlan_find_dev() the
skb->dev is set to bond0 and it is clear no vlan is attached
to this iface. The vlan lookup fails.

This patch moves the VLAN check above the rx_handler. A VLAN
tagged frame is now routed to the eth2.228-fcoe iface in the
above schematic. Untagged frames continue to the bond0 as
normal. This case also remains intact,

eth2 --> bond0 --> vlan.228

Here the skb is VLAN tagged but the vlan lookup fails on eth2
causing the bonding rx_handler to be called. On the second
pass the vlan lookup is on the bond0 iface and completes as
expected.

Putting a VLAN.228 on both the bond0 and eth2 device will
result in eth2.228 receiving the skb. I don't think this is
completely unexpected and was the result prior to the rx_handler
result.

Note, the same setup is also used for other storage traffic that
MPIO is used with eg. iSCSI and similar setups can be contrived
without storage protocols.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocs89x0: Move the driver into the Cirrus dir
Jeff Kirsher [Fri, 7 Oct 2011 22:07:44 +0000 (22:07 +0000)]
cs89x0: Move the driver into the Cirrus dir

The cs89x0 driver was initial placed in the apple/ when it
should have been placed in the cirrus/.  This resolves the
issue by moving the dirver and fixing up the respective
Kconfig(s) and Makefile(s).

Thanks to Sascha for reporting the issue.

-v2 Fix a config error that was introduced with v1 by removing
    the dependency on MACE for NET_VENDOR_APPLE.

CC: Russell Nelson <nelson@crynwr.com>
CC: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agol2tp: give proper headroom in pppol2tp_xmit()
Eric Dumazet [Fri, 7 Oct 2011 05:45:57 +0000 (05:45 +0000)]
l2tp: give proper headroom in pppol2tp_xmit()

pppol2tp_xmit() calls skb_cow_head(skb, 2) before calling
l2tp_xmit_skb()

Then l2tp_xmit_skb() calls again skb_cow_head(skb, large_headroom)

This patchs changes the first skb_cow_head() call to supply the needed
headroom to make sure at most one (expensive) pskb_expand_head() is
done.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomacvlan: handle fragmented multicast frames
Eric Dumazet [Thu, 6 Oct 2011 10:28:31 +0000 (10:28 +0000)]
macvlan: handle fragmented multicast frames

Fragmented multicast frames are delivered to a single macvlan port,
because ip defrag logic considers other samples are redundant.

Implement a defrag step before trying to send the multicast frame.

Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
David S. Miller [Tue, 18 Oct 2011 00:21:50 +0000 (20:21 -0400)]
Merge git://git./linux/kernel/git/jkirsher/net-next

13 years agoixgbe: change the eeprom version reported by ethtool
Emil Tantilov [Thu, 29 Sep 2011 05:01:29 +0000 (05:01 +0000)]
ixgbe: change the eeprom version reported by ethtool

Use 32bit value starting at offset 0x2d for displaying the firmware
version in ethtool. This should work for all current ixgbe HW

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoipv6: remove a rcu_read_lock in ndisc_constructor
Roy.Li [Mon, 3 Oct 2011 19:43:35 +0000 (19:43 +0000)]
ipv6: remove a rcu_read_lock in ndisc_constructor

in6_dev_get(dev) takes a reference on struct inet6_dev, we dont need
rcu locking in ndisc_constructor()

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocan: remove references to berlios mailinglist
Marc Kleine-Budde [Mon, 17 Oct 2011 09:32:00 +0000 (09:32 +0000)]
can: remove references to berlios mailinglist

The BerliOS project, which currently hosts our mailinglist, will
close with the end of the year. Now take the chance and remove all
occurrences of the mailinglist address from the source files.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMAINTAINERS: can: the mailinglist moved to vger.kernel.org
Marc Kleine-Budde [Mon, 17 Oct 2011 09:31:59 +0000 (09:31 +0000)]
MAINTAINERS: can: the mailinglist moved to vger.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/flow: Fix potential memory leak
huajun li [Tue, 27 Sep 2011 22:51:39 +0000 (22:51 +0000)]
net/flow: Fix potential memory leak

While preparing net flow caches, once a fail may cause potential
memory leak , fix it.

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Remove unused tcp_end field in send WQ
Anton Blanchard [Fri, 14 Oct 2011 05:31:12 +0000 (05:31 +0000)]
ehea: Remove unused tcp_end field in send WQ

The tcp_end field is not actually used by the hardware, so there
is no need to set it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Add GRO support
Anton Blanchard [Fri, 14 Oct 2011 05:31:11 +0000 (05:31 +0000)]
ehea: Add GRO support

Add GRO support to the ehea driver.

v3:
[cascardo] no need to enable GRO, since it's enabled by default
[cascardo] vgrp was removed in the vlan cleanup

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Remove LRO support
Anton Blanchard [Fri, 14 Oct 2011 05:31:10 +0000 (05:31 +0000)]
ehea: Remove LRO support

In preparation for adding GRO to ehea, remove LRO.

v3:
[cascardo] fixed conflict with vlan cleanup

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Add 64bit statistics
Anton Blanchard [Fri, 14 Oct 2011 05:31:09 +0000 (05:31 +0000)]
ehea: Add 64bit statistics

Switch to using ndo_get_stats64 to get 64bit statistics.

v3:
[cascardo] use rtnl_link_stats64 as port stats

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Remove some unused definitions
Anton Blanchard [Fri, 14 Oct 2011 05:31:08 +0000 (05:31 +0000)]
ehea: Remove some unused definitions

The queue macros are many levels deep and it makes it harder to
work your way through them when many of the versions are unused.
Remove the unused versions.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Simplify type 3 transmit routine
Anton Blanchard [Fri, 14 Oct 2011 05:31:07 +0000 (05:31 +0000)]
ehea: Simplify type 3 transmit routine

If a nonlinear skb fits within the immediate area, use skb_copy_bits
instead of copying the frags by hand.

v3:
[cascardo] fixed conflict with use of skb frag API

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Merge swqe2 TSO and non TSO paths
Anton Blanchard [Fri, 14 Oct 2011 05:31:06 +0000 (05:31 +0000)]
ehea: Merge swqe2 TSO and non TSO paths

write_swqe2_TSO and write_swqe2_nonTSO are almost identical.

For TSO we have to set the TSO and mss bits in the wqe and we only
put the header in the immediate area, no data. Collapse both
functions into write_swqe2_immediate.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Simplify ehea_xmit2 and ehea_xmit3
Anton Blanchard [Fri, 14 Oct 2011 05:31:05 +0000 (05:31 +0000)]
ehea: Simplify ehea_xmit2 and ehea_xmit3

Based on a patch from Michael Ellerman, clean up a significant
portion of the transmit path. There was a lot of duplication here.
Even worse, we were always checksumming tx packets and ignoring the
skb->ip_summed field.

Also remove NETIF_F_FRAGLIST from dev->features, I'm not sure why
it was enabled.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Allocate large enough skbs to avoid partial cacheline DMA writes
Anton Blanchard [Fri, 14 Oct 2011 05:31:04 +0000 (05:31 +0000)]
ehea: Allocate large enough skbs to avoid partial cacheline DMA writes

The ehea adapter has a mode where it will avoid partial cacheline DMA
writes on receive by always padding packets to fall on a cacheline
boundary.

Unfortunately we currently aren't allocating enough space for a full
ethernet MTU packet to be rounded up, so this optimisation doesn't hit.

It's unfortunate that the next largest packet size exposed by the
hypervisor interface is 2kB, meaning our skb allocation comes out of a
4kB SLAB. However the performance increase due to this optimisation is
quite large and my TCP stream numbers increase from 900MB to 1000MB/sec.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Add vlan_features
Anton Blanchard [Fri, 14 Oct 2011 05:31:03 +0000 (05:31 +0000)]
ehea: Add vlan_features

We weren't enabling any VLAN features so we missed out on checksum
offload and TSO when using VLANs. Enable them.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Dont check NETIF_F_TSO in TX path
Anton Blanchard [Fri, 14 Oct 2011 05:31:02 +0000 (05:31 +0000)]
ehea: Dont check NETIF_F_TSO in TX path

It seems like the ehea xmit routine and an ethtool change of TSO
mode could race, resulting in corrupt packets. Checking gso_size
is enough and we can use the helper function.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Remove num_tx_qps module option
Anton Blanchard [Fri, 14 Oct 2011 05:31:01 +0000 (05:31 +0000)]
ehea: Remove num_tx_qps module option

The num_tx_qps module option allows a user to configure a different
number of tx and rx queues. Now the networking stack is multiqueue
aware it makes little sense just to enable the tx queues and not the
rx queues so remove the option.

v3:
[cascardo] fixed conflict with get_stats change

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Remove force_irq logic in napi poll routine
Anton Blanchard [Fri, 14 Oct 2011 05:31:00 +0000 (05:31 +0000)]
ehea: Remove force_irq logic in napi poll routine

commit 18604c548545 (ehea: NAPI multi queue TX/RX path for SMP) added
driver specific logic for exiting napi mode. I'm not sure what it was
trying to solve and it should be up to the network stack to decide when
we are done polling so remove it.

v3:
[cascardo] Fixed extra parentheses.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Update multiqueue support
Anton Blanchard [Fri, 14 Oct 2011 05:30:59 +0000 (05:30 +0000)]
ehea: Update multiqueue support

The ehea driver had some multiqueue support but was missing the last
few years of networking stack improvements:

- Use skb_record_rx_queue to record which queue an skb came in on.

- Remove the driver specific netif_queue lock and use the networking
  stack transmit lock instead.

- Remove the driver specific transmit queue hashing and use
  skb_get_queue_mapping instead.

- Use netif_tx_{start|stop|wake}_queue where appropriate. We can also
  remove pr->queue_stopped and just check the queue status directly.

- Print all 16 queues in the ethtool stats.

We now enable multiqueue by default since it is a clear win on all my
testing so far.

v3:
[cascardo] fixed use_mcs parameter description
[cascardo] set ehea_ethtool_stats_keys as const

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Remove NETIF_F_LLTX
Anton Blanchard [Fri, 14 Oct 2011 05:30:58 +0000 (05:30 +0000)]
ehea: Remove NETIF_F_LLTX

Remove the deprecated NETIF_F_LLTX feature. Since the network stack
now provides the locking we can remove the driver specific
pr->xmit_lock.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'master' of git://git.infradead.org/users/linville/wireless-next into...
John W. Linville [Mon, 17 Oct 2011 19:05:26 +0000 (15:05 -0400)]
Merge branch 'master' of git://git.infradead.org/users/linville/wireless-next into for-davem

13 years agoixgbe: allow eeprom writes via ethtool
Emil Tantilov [Thu, 6 Oct 2011 08:57:04 +0000 (08:57 +0000)]
ixgbe: allow eeprom writes via ethtool

Implement support for ethtool -E

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoixgbe: fix endianess when writing driver version to firmware
Emil Tantilov [Tue, 11 Oct 2011 08:24:57 +0000 (08:24 +0000)]
ixgbe: fix endianess when writing driver version to firmware

This patch makes sure that register writes are in little endian and
also converts the reads back to big-endian.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoigb: Check if subordinate VFs are assigned to virtual machines
Greg Rose [Fri, 14 Oct 2011 02:57:14 +0000 (02:57 +0000)]
igb: Check if subordinate VFs are assigned to virtual machines

Kvm and the Xen pci-back driver will set a flag in the virtual function
pci device dev_flags when the VF is assigned to a guest VM.  Before
destroying subordinate VFs check to see if the flag is set and if so
skip the call to pci_disable_sriov() to avoid system crashes.

Copy the maintainer for the Xen pci-back driver.  Also CC'ing
maintainers of all drivers found to call pci_disable_sriov().

V2 - Fix  uninitialized variable warning

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Dimitris Michailidis <dm@chelsio.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: James Smart <james.smart@emulex.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoigbvf: Fix trunk vlan
Greg Rose [Sat, 27 Aug 2011 06:24:59 +0000 (06:24 +0000)]
igbvf: Fix trunk vlan

Changes to clean up the VLAN Rx path by Jiri Pirko broke trunk VLAN.
Trunk VLANs in a VF driver are those set using

"ip link set <pfdev> vf <n> <vlanid>"

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
CC: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoigbvf: convert to ndo_fix_features
Michał Mirosław [Tue, 30 Aug 2011 17:07:11 +0000 (17:07 +0000)]
igbvf: convert to ndo_fix_features

Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM.
Removing this needs deeper surgery.

Things noticed:
 - HW VLAN acceleration probably can be toggled, but it's left as is
 - the resets on RX csum offload change can probably be avoided
 - there is A LOT of copy-and-pasted code here

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoigb: enable l4 timestamping for v2 event packets
Jacob Keller [Wed, 12 Oct 2011 00:51:54 +0000 (00:51 +0000)]
igb: enable l4 timestamping for v2 event packets

When enabling hardware timestamping for ptp v2 event packets, the
software does not setup the queue for l4 packets, although layer 4
packets are valid for v2. This patch adds the flag which enables
setting up a queue and enabling udp packet timestamping.

Signed-off-by: Jacob E Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoixgbe: Add new netdev op to turn spoof checking on or off per VF
Greg Rose [Thu, 29 Sep 2011 05:57:33 +0000 (05:57 +0000)]
ixgbe: Add new netdev op to turn spoof checking on or off per VF

Implements the new netdev op to allow user configuration of spoof
checking on a per VF basis.

V2 - Change netdev spoof check op setting to bool

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoif_link: Add additional parameter to IFLA_VF_INFO for spoof checking
Greg Rose [Sat, 8 Oct 2011 03:05:24 +0000 (03:05 +0000)]
if_link: Add additional parameter to IFLA_VF_INFO for spoof checking

Add configuration setting for drivers to turn spoof checking on or off
for discrete VFs.

v2 - Fix indentation problem, wrap the ifla_vf_info structure in
     #ifdef __KERNEL__ to prevent user space from accessing and
     change function paramater for the spoof check setting netdev
     op from u8 to bool.
v3 - Preset spoof check setting to -1 so that user space tools such
     as ip can detect that the driver didn't report a spoofcheck
     setting.  Prevents incorrect display of spoof check settings
     for drivers that don't report it.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoe1000e: locking bug introduced by commit 67fd4fcb
Bruce Allan [Fri, 7 Oct 2011 03:50:38 +0000 (03:50 +0000)]
e1000e: locking bug introduced by commit 67fd4fcb

Commit 67fd4fcb (e1000e: convert to stats64) added the ability to update
statistics more accurately and on-demand through the net_device_ops
.ndo_get_stats64 hook, but introduced a locking bug on 82577/8/9 when
linked at half-duplex (seen on kernels with CONFIG_DEBUG_ATOMIC_SLEEP=y and
CONFIG_PROVE_LOCKING=y).  The commit introduced code paths that caused a
mutex to be locked in atomic contexts, e.g. an rcu_read_lock is held when
irqbalance reads the stats from /sys/class/net/ethX/statistics causing the
mutex to be locked to read the Phy half-duplex statistics registers.

The mutex was originally introduced to prevent concurrent accesses of
resources (the NVM and Phy) shared by the driver, firmware and hardware
a few years back when there was an issue with the NVM getting corrupted.
It was later split into two mutexes - one for the NVM and one for the Phy
when it was determined the NVM, unlike the Phy, should not be protected by
the software/firmware/hardware semaphore (arbitration of which is done in
part with the SWFLAG bit in the EXTCNF_CTRL register).  This latter
semaphore should be sufficient to prevent resource contention of the Phy in
the driver (i.e. the mutex for Phy accesses is not needed), but to be sure
the mutex is replaced with an atomic bit flag which will warn if any
contention is possible.

Also add additional debug output to help determine when the sw/fw/hw
semaphore is owned by the firmware or hardware.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
13 years agolibertas: fix changing interface type when interface is down
Daniel Drake [Fri, 14 Oct 2011 11:05:26 +0000 (12:05 +0100)]
libertas: fix changing interface type when interface is down

The recent changes to only power the device when the interface up
introduced a bug: changing interface type, legal when the interface
is down, performs device I/O.

Fix this functionality by validating and recording the interface
type when the change is requested, but only applying the change
if/when the interface is brought up.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomac80211: Provide station flags to cfg80211
Helmut Schaa [Thu, 13 Oct 2011 14:30:40 +0000 (16:30 +0200)]
mac80211: Provide station flags to cfg80211

Only station flags that are already defined in nl80211 are added for
now.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agonl80211: Add sta_flags to the station info
Helmut Schaa [Thu, 13 Oct 2011 14:30:39 +0000 (16:30 +0200)]
nl80211: Add sta_flags to the station info

Reuse the already existing struct nl80211_sta_flag_update to specify
both, a flag mask and the flag set itself. This means
nl80211_sta_flag_update is now used for setting station flags and also
for getting station flags.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomac80211: fix TID for null poll response
Johannes Berg [Thu, 13 Oct 2011 11:19:19 +0000 (13:19 +0200)]
mac80211: fix TID for null poll response

The queue mapping/TID for non-QoS null data
responses to is never set, making it default
to BK. Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k: Rename AR9480 into AR9462
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:44 +0000 (11:00 +0530)]
ath9k: Rename AR9480 into AR9462

Renamed to be in sync with Marketing term and to avoid
confusion with other chip names.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Rename AR9480 -> AR9462 initvals
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:43 +0000 (11:00 +0530)]
ath9k_hw: Rename AR9480 -> AR9462 initvals

The AR946/8x chips are 2x2 Dual band with BT support. In order
to avoid misleading with other chips and to be in sync with
marketing team's term, AR9480 is renamed as AR9462.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Do fast channel change based on reusable calibration results
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:42 +0000 (11:00 +0530)]
ath9k_hw: Do fast channel change based on reusable calibration results

Support the fast channel change across band switch only when there
are available of reusable cabliration results. And also observed that
doing agc control calibration on fastcc, sometimes causing calibration
timeout. Hence changing agc control to be run only on full chip reset.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Add radio retention support for AR9480
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:41 +0000 (11:00 +0530)]
ath9k_hw: Add radio retention support for AR9480

Supported calibrations of radio retention table (RTT) are
- DC offset
- Filter
- Peak detect

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Update normal/min noise floor value for AR9480
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:40 +0000 (11:00 +0530)]
ath9k_hw: Update normal/min noise floor value for AR9480

To improve sensitivity for AR9480, the normal and minimum
noise floor values of both bands are updated.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Support fast channel change on 5GHz for AR9003 chips
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:39 +0000 (11:00 +0530)]
ath9k_hw: Support fast channel change on 5GHz for AR9003 chips

The commit "ath9k_hw: Improve fast channel change for AR9003 chips"
fixes the fast channel change issue for AR9003 chips that was
originally observed in AR9382 chip. Hence enabling fastcc support
again for 11A channel for AR9003 chips.

Cc: Paul Stewart <pstew@google.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Cleanup Tx calibrations for AR9003 chips
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:38 +0000 (11:00 +0530)]
ath9k_hw: Cleanup Tx calibrations for AR9003 chips

Currently Tx IQ calibration is enabled by default for all AR9003
chips. But for AR9480, the calibration status should be read from
chip after processing ini. And also the carrier leak calibration
status is checked during init cal. As the init_cal is being called
for fast channel change too, the tx_cl status only be read after
full reset. Hence moving that into process ini function.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Add support to reuse Carrier leak calibration
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:37 +0000 (11:00 +0530)]
ath9k_hw: Add support to reuse Carrier leak calibration

This patch adds support to reuse Carrier leak calibration
during fast channel change for AR9480 chips.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Add support to reuse TxIQ cal measurements
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:36 +0000 (11:00 +0530)]
ath9k_hw: Add support to reuse TxIQ cal measurements

Pass an argument to decide whether to reuse the Tx IQ
calibration measurements or not during fast channel change.
This will be later used by MCI support for AR9480.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Improve fast channel change for AR9003 chips
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:35 +0000 (11:00 +0530)]
ath9k_hw: Improve fast channel change for AR9003 chips

In order to reduce the overall scan time, fast channel change
should be implemented properly. This patch adds fast channel
change support across band switch or channel mode switch
instead of doing full chip reset. During the fastcc, tx iqcal
measurements are preserved and will be reloaded after successful
the channel change.

This patch also addressed fast channel issue where the STA can not
see APs in higher than operating channel on 5GHz band after
the association.

Cc: Paul Stewart <pstew@google.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Updated AR9003 tx gain table for 5GHz
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:34 +0000 (11:00 +0530)]
ath9k_hw: Updated AR9003 tx gain table for 5GHz

The 5G Tx gain table w/ XPA is updated to improve spur
performance in high_power Tx gain table.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Update AR9003 initval to improve phase noise
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:33 +0000 (11:00 +0530)]
ath9k_hw: Update AR9003 initval to improve phase noise

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Updated ar9003 initval table for AR9380
Rajkumar Manoharan [Thu, 13 Oct 2011 05:30:32 +0000 (11:00 +0530)]
ath9k_hw: Updated ar9003 initval table for AR9380

The ar9003 table is updated to increase XLNA BIAS
output driver strengh.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: Fix ASPM L1 issue for AR9480
Rajkumar Manoharan [Thu, 13 Oct 2011 05:19:13 +0000 (10:49 +0530)]
ath9k_hw: Fix ASPM L1 issue for AR9480

Because of not clearing Bit 14 of AR_WA, the ASPM L1 is not
enabled when entering into sleep mode. AR9480 does not need
bit 14 to be set.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomwifiex: fix make namespacecheck warnings
Amitkumar Karwar [Thu, 13 Oct 2011 03:29:33 +0000 (20:29 -0700)]
mwifiex: fix make namespacecheck warnings

This patch takes care of warnings found by running
'make namespacecheck':

1. Remove dead code.
2. Reorder function definitions to avoid forward declarations.
3. Remove unnecessary function/structure declarations and mark
   them as static.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomwifiex: use separate wait condition for each command node
Amitkumar Karwar [Thu, 13 Oct 2011 03:28:06 +0000 (20:28 -0700)]
mwifiex: use separate wait condition for each command node

Currently global wait condition (adapter->cmd_wait_q.condition)
is used while sending synchronous commands to FW. When two threads
enter in mwifiex_send_cmd_sync() routine at the same time, both the
threads wait for their command responses. Since wait condition is
same for both, they wake up simultaneously after getting response
of 1st command. After this when a thread is waiting for command
response of 3rd command, it wakes up after getting response of 2nd
command and so on. Therefore we don't wait for the response of last
command(0xaa) during unload. Hence while next time loading the driver
command time out is seen for INIT command.

This problem is resolved by having separate wait condition flag for
each command(except scan command). Since scan command is treated
differently (by maintaining scan pending q etc.), newly defined flag
(scan_wait_q_woken) is used as a scan wait condition.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>