drm/radeon/dpm: implement force performance level for SI

Allows you to force the selected performance level via sysfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: implement force performance level for cayman

Allows you to force a performance level via sysfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: implement force performance levels for 7xx/eg/btc

Allows you to limit the selected power levels via sysfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add infrastructure to force performance levels

This allows you to force specific power levels within a power
state.  Due to hardware restrictions between generations, the
interface is limited to the following 3 selections:

auto: all levels enabled
low: forced to the lowest power level
high: forced to the highest power level

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix surface setup on r1xx

r1xx asics have a slightly different surface register
setup compared to newer asics.  There is no specific
enable bit for macro tiling, rather, to disable macro
tiling, you need to set the surface pitch to 0.

With this fixed, the special rn50 handling can go.

Noticed-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add support for 3d perf states on older asics

Certain older rv770 asics have both a performance and
a 3D performance state rather than just multiple performance
levels in the state power state.  The current code would
select the performance state rather than the 3D performance
state when the "performance" profile was selected.  This change
switches to the "balanced" profile by default which ends up being
the internal performance profile.  When the user selects the
"performance" profile, it selects the internal 3D performance
state so the user can select the higher performance modes.

For most asics this changes nothing.  For certain rv770 asics
with static performance and 3D performance states, this allows
you to select between then using by selecting the "balanced"
and "performance" dpm profiles.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: set default clocks for SI when DPM is disabled

Fix patching of vddc values for SI and enable manually forcing
clocks to default levels as per NI.

This improves the out of the box performance with SI asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag

Some asic revisions need to disable PG when UVD is active.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/tn: disable PG when changing UVD clocks

Causes hangs for some people.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/sumo: disable PG when changing UVD clocks

Causes hangs for some people.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/aruba: disable additional rlc features

They cause problems with dynamic clocking.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix endian bug in radeon_atom_get_mclk_range_table()

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix compilation with certain versions of gcc

Add #include <linux/seq_file.h> to *_dpm.c files

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: clarify debugfs warning

For chips without debugfs dpm support say that it's not
implemented rather than not supported to avoid confusion
about DPM support in general.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add debugfs support for SI

This allows you to look at the current DPM state via
debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add debugfs support for cayman

This allows you to look at the current DPM state via
debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add debugfs support for TN

This allows you to look at the current DPM state via
debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add debugfs support for ON/LN

This allows you to look at the current DPM state via
debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add debugfs support for 7xx/evergreen/btc

This allows you to look at the current DPM state via
debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add debugfs support for rv6xx

This allows you to look at the current DPM state via
debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add infrastructure to support debugfs info

This lays the frameworks to report realtime power level
feedback.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: re-enable state transitions for Cayman

Was disabled due to stability issues on certain boards
caused by the a bug in the parsing of the atom mc reg tables.
That's fixed now so re-enable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: re-enable state transitions for BTC

Was disabled due to stability issues on certain boards
caused by the a bug in the parsing of the atom mc reg tables.
That's fixed now so re-enable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix typo in radeon_atom_init_mc_reg_table()

Bad pointer math.  Fixes hangs in state transitions with
BTC+ asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/atom: fix endian bug in radeon_atom_init_mc_reg_table()

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove sumo dpm/uvd bringup leftovers

Function doesn't do anything useful.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

- Various fixes that make surviving concurrent piglit more possible.
- Buffer object deletion no longer synchronous
- Context/register initialisation updates that have been reported to
solve some stability issues (particularly on some problematic GF119
chips)
- Kernel side support for VP2 video decoding engines

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (44 commits)
  drm/nvd0-/disp: handle case where display engine is missing/disabled
  drm/gr/nvc0-: merge nvc0/nve0 ucode, and use cpp instead of m4
  drm/nouveau/bsp/nv84: initial vp2 engine implementation
  drm/nouveau/vp/nv84: initial vp2 engine implementation
  drm/nouveau/core: xtensa engine base class implementation
  drm/nouveau/vdec: fork vp3 implementations from vp2
  drm/nouveau/core: move falcon class to engine/
  drm/nouveau/kms: don't fail if there's no dcb table entries
  drm/nouveau: remove limit on gart
  drm/nouveau/vm: perform a bar flush when flushing vm
  drm/nvc0/gr: cleanup register lists, and add nvce/nvcf to switches
  drm/nvc8/gr: update initial register/context values
  drm/nvc4/gr: update initial register/context values
  drm/nvc1/gr: update initial register/context values
  drm/nvc3/gr: update initial register/context values
  drm/nvc0/gr: update initial register/context values
  drm/nvd9/gr: update initial register/context values
  drm/nve4/gr: update initial register/context values
  drm/nvc0-/gr: bump maximum gpc/tpc limits
  drm/nvf0/gr: initial register/context setup
  ...

drm/nvd0-/disp: handle case where display engine is missing/disabled

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/gr/nvc0-: merge nvc0/nve0 ucode, and use cpp instead of m4

No code changes, proven by envyas producing identical binaries.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bsp/nv84: initial vp2 engine implementation

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/vp/nv84: initial vp2 engine implementation

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: xtensa engine base class implementation

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/vdec: fork vp3 implementations from vp2

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: move falcon class to engine/

Not really "core" per-se.  About to merge Ilia's work adding another
similar class for the VP2 xtensa engines, so, seems like a good time to
move all these to engine/.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms: don't fail if there's no dcb table entries

Fixes module not loading on Tesla K20.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: remove limit on gart

Most graphics cards nowadays have a multiple of this limit as their vram,
so limiting GART doesn't seem to make much sense.

Signed-off-by: Maarten >Lnkhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/vm: perform a bar flush when flushing vm

Appears to fix the regression from "drm/nvc0/vm: handle bar tlb flushes
internally".

nvidia always seems to do this flush after writing values.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/gr: cleanup register lists, and add nvce/nvcf to switches

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc8/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc4/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc1/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc3/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvd9/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve4/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0-/gr: bump maximum gpc/tpc limits

Needed for GK110, separate commit to catch any unexpected breaks to
other parts of the code.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvf0/gr: initial register/context setup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve7/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve6/gr: update initial register/context values

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: delay busy bo vma removal until fence signals

As opposed to an explicit wait.  Allows userspace to not stall waiting
on buffer deletion.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/vm: make each vma take a reference on its parent vm

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: remove nouveau_mm.mutex, no more users

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/vm: take subdev mutex, not the mm, protects against race with vm/nvc0

nvc0_vm_flush() accesses the pgd list, which will soon be able to race
with vm_unlink() during channel destruction.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/vm: handle bar tlb flushes internally

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50-/vm: take mutex rather than irqsave spinlock

These operations can take quite some time, and we really don't want to
have to hold a spinlock for too long.

Now that the lock ordering for vm and the gr/nv84 hw bug workaround has
been reversed, it's possible to use a mutex here.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50/vm: remove explicit vm knowledge from engines

This reverses the lock ordering between VM and gr/nv84:nvc0.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50/vm: handle bar tlb flushes internally

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/gr: port mp trap handling from calim's kepler code

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve0/gr: attempt to resume after sm traps

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve0/gr: s/tp/tpc/

NVIDIA's name...

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve0/fifo: create our playlists up-front, at startup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nva3/clk: minor improvements to fractional N calculation

Helps us to get identical numbers to the binary driver for (at least)
Kepler memory PLLs, and fixes a rounding error.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fb: initialise vram controller as pfb sub-object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk: change init ordering, no longer needed by devinit

And, will depend on FB/VOLT/DAEMON being ready when it gets initialised
so that it can set/restore clocks.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/devinit: move simple pll setting routines to devinit

These are pretty much useless for reclocking purposes.  Lets make it
clearer what they're for and move them to DEVINIT to signify they're
for the very simple PLL setting requirements of running the init
tables.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: pass generic subdev to calculation routines

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve0/ce: stub interrupt handler

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve0/ce: link ce2 to its engine, rather than from graphics

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve0/fifo: copy engine context stored in ramfc, not externally

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nve0/ce: create engine object for ce2

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: pull in latest ucode builds from external tree

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Feature summary:
Add S3C64XX SoC series support - S3C64XX SoC series are previous version
chips of Exynos SoC series. With this patch set, KMS driver of Exynos drm
supports those chips also.

Update device tree support - This patch set corrects compatible strings,
and adds Exynos5420 SoC support for hdmi subsystem.

Consider CCF (Common Clock Framework) support - With reference to CCF
support, it uses clock_prepare_enable/clock_disable_unprepare instead of
clk_enable/clk_disable for hdmi subsystem.

Big cleanups - This patch just removes unnecessary all debug logs.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (22 commits)
  ARM: dts: change compatible strings for EXYNOS5250 hdmi subsystem
  drm/exynos: add support for exynos5420 mixer
  drm/exynos: add new compatible strings for hdmi subsystem
  drm/exynos: fix interlace resolutions for exynos5420
  drm/exynos: use of_get_named_gpio to get hdmi hpd gpio
  drm/exynos: make sure to handle an error case to vm_mmap call
  drm/exynos: exynos_drm_ipp: Remove redundant break statement
  drm/exynos: add mout_hdmi clock in hdmi driver to change parent
  drm/exynos: Prepare/Unprepare HDMI subsystem clocks
  drm/exynos: Clean up logs for DRM_ERROR / DRM_DEBUG_KMS
  drm/exynos: Remove tracking log functions
  drm/exynos: hdmi: use drm_display_mode to check the supported modes
  drm/exynos: fimd: Add support for S3C64xx SoCs
  drm/exynos: fimd: Add support for FIMD variants with clock selection
  drm/exynos: fimd: Add support for FIMD versions without SHADOWCON register
  drm/exynos: fimd: Hold pointer to driver data in context struct
  drm/exynos: do not use mode_set_base function directly
  drm/exynos: Remove redundant use of of_match_ptr macro
  drm/exynos: remove ignoring return value warning in hdmi
  drm/exynos: fix WINDOWS_NR checking to vidi driver
  ...

ARM: dts: change compatible strings for EXYNOS5250 hdmi subsystem

This patch renames the combatible strings for hdmi, mixer, ddc
and hdmiphy. It follows the convention of using compatible string
which represent the SoC in which the IP was added for the first
time.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: add support for exynos5420 mixer

Add support for exynos5420 mixer IP in the drm mixer driver.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: add new compatible strings for hdmi subsystem

This patch adds new combatible strings for hdmi, mixer, ddc
and hdmiphy. It follows the convention of using compatible string
which represent the SoC in which the IP was added for the first
time.

Drivers continue to support the previous compatible strings
but further addition of these compatible strings in device tree
is deprecated.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix interlace resolutions for exynos5420

Modified code for calculating hdmi IP register values from drm timing
values. The modification is based on the inputs from hw team and specifically
proposed for 1440x576i and 1440x480i. But same changes holds good for other
interlaced resolutions also.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: use of_get_named_gpio to get hdmi hpd gpio

Cleanup by removing flags variable from drm_hdmi_dt_parse_pdata
which is not used anywhere. Swtiching to of_get_named_gpio instead
of of_get_named_gpio_flags solved this.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Seung-Woo Kim <sw0312@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: make sure to handle an error case to vm_mmap call

vm_mmap function returns unsigned long so addr type should be unsigned long.
a pointer or address variable is required to use unsigned long or uint64_t
type for 64bits address support.

So this patch makes sure that addr has unsigned long type and also
exynos_drm_gem_mmap_ioctl returns correct error type.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

drm/exynos: exynos_drm_ipp: Remove redundant break statement

'break' after goto statement is redundant. Silences the following
message:
drivers/gpu/drm/exynos/exynos_drm_ipp.c:1067 exynos_drm_ipp_check_valid()
info: ignoring unreachable code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: add mout_hdmi clock in hdmi driver to change parent

HDMI driver needs to configure the mout_hdmi mux clock to change
the parent between sclk_hdmiphy and sclk_pixel.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Prepare/Unprepare HDMI subsystem clocks

Change the clk_enable/clk_disable calls in mixer and hdmi drivers into
clk_prepare_enable/clk_disable_unprepare, respectively.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Clean up logs for DRM_ERROR / DRM_DEBUG_KMS

This patch cleans up logs for DRM_ERROR / DRM_DEBUG_KMS to avoid
logging duplicated function name because the macros already contain
 __func__.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Remove tracking log functions

This patch removes tracking log functions which were used to debug
in the early development stage and are not so important as were.
So remove them for code clean up.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: hdmi: use drm_display_mode to check the supported modes

This patch renames check_timing to check_mode and removes the
unnecessary conversion of drm_display_mode to/from fb_videomode in
the hdmi driver.

v4:
1) Changed the commit message to add information related to renaming
the callbacks to check_mode.
2) Changed debug message to print 1/0 for interlace mode.

v3:
1) Replaced check_timing callbacks with check_mode.
2) Change the type of second parameter of check_mode callback from void
pointer paramenter to struct drm_display_mode pointer.

v2:
1) Removed convert_to_video_timing().
2) Corrected DRM_DEBUG_KMS to print the resolution properly.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Add support for S3C64xx SoCs

The FIMD block present on S3C6400/S3C6410 SoCs is compatible with this
driver, so it can be supported by it as well.

This patch adds appropriate device IDs and driver data to enable this
driver for S3C64xx SoCs.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Add support for FIMD variants with clock selection

Some platforms that can be supported this driver has additional clock
source selection bits in VIDCON0 register that allows to select which
clock should be used to drive the pixel clock: bus clock or special
clock.

Since this driver assumes that special clock always drives the pixel
clock, this patch sets the selection bitfield to use the special clock.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Add support for FIMD versions without SHADOWCON register

Some platforms that can be supported with this driver have PRTCON
register instead of SHADOWCON, which requires slightly different
handling.

This patch factors out all register shadow control code from the driver
and adds a function to control register shadowing appropriately,
depending on driver data.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Hold pointer to driver data in context struct

This patch adds pointer to driver data to fimd_context structure, to
remove the need to call drm_fimd_get_driver_data() each time access to
driver data is necessary.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: do not use mode_set_base function directly

This patch adds exynos_drm_crtc_mode_set_commit function
to update mode data and it makes page flip call this function
instead of calling exynos_drm_crtc_mode_set_base function directly.

exynos_drm_crtc_mode_set_base function is called by drm subsystem
as a callback so we don't have to call this function directly.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

drm/exynos: Remove redundant use of of_match_ptr macro

'mixer_match_types' is always compiled in. Hence of_match_ptr is not
necessary.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove ignoring return value warning in hdmi

The definition of regulator_bulk_enable is fixed with __must_check
and this causes following build warning.
warning: ignoring return value of 'regulator_bulk_enable',
declared with attribute warn_unused_result
This patch fixes to check return value of the function.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix WINDOWS_NR checking to vidi driver

This patch just checks if win_data array range is valid
or not correctly.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

drm/exynos: fix tests for valid FIMD window number

Valid values for FIMD windows are from 0 to WINDOWS_NR-1
inclusive (5 windows in total). The WINDOWS_NR is also
a size of fimd_context.win_data array.
However, early-return tests for wrong values of windows
accepted a value of WINDOWS_NR which is out of bound
for fimd_context.win_data.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix checks for valid mixer window

Valid values for mixer window are from 0 to MIXER_WIN_NR-1 inclusive.
Arrays in structures (e.g. mixer_context.win_data) have size of
MIXER_WIN_NR so checks for wrong mixer window must be greater-equal.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Revert "drm: kms_helper: don't lose hotplug event"

This reverts commit 160954b7bca43da7cd3cfbce310e6df919a8216e.

This was rearming the workqueue with a 0 timeout, causing
a WARN_ON, and possible loop.

Daniel writes:
"I've looked a bit into this and I think we need to have a separate
work struct for recovering these lost hotplug events since the
continuous self-rearming case is a real risk (e.g. if a connector
flip-flops all the time). At least I don't see a sane way to block out
re-arming with the current code in a simple way. So reverting the
offender seems like the right thing and I'll go back to the drawing
board for 3.12."

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/doc: Document the KMS property API

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/doc: Remove outdated note about i915 driver not behaving properly

The i915 driver has been fixed not to modify the mode argument of the
encoder mode_fixup operation. Remove the related comment from the
documentation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Improve manual IRQ installation documentation

Define the rules for using irqs from drm drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/prime: add return check for dma_buf_fd

The dma_buf_fd() can return error when it fails to prepare fd,
so the dma_buf needs to be put.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/prime: reorder drm_prime_add_buf_handle and remove prototype

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>