openwrt/staging/blogic.git
5 years agodrm/lease: Drop recursive leads checks
Daniel Vetter [Thu, 28 Feb 2019 14:49:05 +0000 (15:49 +0100)]
drm/lease: Drop recursive leads checks

We disallow subleasing, so no point checking whether the master holds
all the leases - it will.

Spotted while typing exhaustive igt coverage for all these corner
cases.

Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-3-daniel.vetter@ffwll.ch
5 years agodrm/leases: Drop object_id validation for negative ids
Daniel Vetter [Thu, 28 Feb 2019 14:49:04 +0000 (15:49 +0100)]
drm/leases: Drop object_id validation for negative ids

Not exactly sure what's the aim here, but the canonical nil object has
id == 0, we don't use negative object ids for anything. Plus all
object_id are valided by the object_idr, there's nothing we need to do
on top of that ENOENT check a bit further down.

Spotted while typing exhaustive igt coverage for all these
corner-cases.

Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-2-daniel.vetter@ffwll.ch
5 years agodrm/fb: revert the i915 Actually configure untiled displays from master
Dave Airlie [Wed, 24 Apr 2019 06:33:29 +0000 (16:33 +1000)]
drm/fb: revert the i915 Actually configure untiled displays from master

This code moved in here in master, so revert it the same way.

This is the same revert as 9fa246256e09 ("Revert "drm/i915/fbdev:
Actually configure untiled displays"") in drm-fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
5 years agodrm/udl: move to embedding drm device inside udl device.
Dave Airlie [Fri, 5 Apr 2019 03:17:15 +0000 (13:17 +1000)]
drm/udl: move to embedding drm device inside udl device.

This should help with some of the lifetime issues, and move us away
from load/unload.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-4-airlied@gmail.com
5 years agodrm/udl: introduce a macro to convert dev to udl.
Dave Airlie [Fri, 5 Apr 2019 03:17:14 +0000 (13:17 +1000)]
drm/udl: introduce a macro to convert dev to udl.

This just makes it easier to later embed drm into udl.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-3-airlied@gmail.com
5 years agoMerge tag 'exynos-drm-next-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel...
Dave Airlie [Wed, 24 Apr 2019 03:09:50 +0000 (13:09 +1000)]
Merge tag 'exynos-drm-next-for-v5.2' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Log cleanups
- Correct the use of log macro in error case.
- Drop unnecessary messages.
- Replace DRM_ERROR/DEBUG with DRM_DEV_ERROR/DEBUG.
- Print out debug messages with correct device name in vidi and ipp drivers.

One trivial cleanup
- Just fix checkpatch error, "foo* bar" to "foo *bar" in g2d driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556073313-9923-1-git-send-email-inki.dae@samsung.com
5 years agodrm/ipp: clean up debug messages
Inki Dae [Mon, 15 Apr 2019 08:13:38 +0000 (17:13 +0900)]
drm/ipp: clean up debug messages

Print out debug messages with correct device name.

As for this, this patch adds device pointer to exynos_drm_ipp structure,
and in case of exynos_drm_ipp_task structure, replace drm_device pointer
with device one. This will make each ipp driver to print out debug
messages with correct device name.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
5 years agodrm/vidi: replace platform_device pointer with device one
Inki Dae [Mon, 15 Apr 2019 07:35:08 +0000 (16:35 +0900)]
drm/vidi: replace platform_device pointer with device one

Add device pointer to vidi_context and remove platform_device pointer.

It doesn't need for vidi_context to contain platform_device object.
Instead, this patch makes this driver more simply by replacing platform_device
pointer with device one.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
5 years agodrm/exynos: use DRM_DEV_DEBUG* instead of DRM_DEBUG macro
Inki Dae [Mon, 15 Apr 2019 07:25:12 +0000 (16:25 +0900)]
drm/exynos: use DRM_DEV_DEBUG* instead of DRM_DEBUG macro

Use DRM_DEV_DEBUG* instead of DRM_DEBUG macro to print out
debug messages.

This patch just cleans up the use of debug log macro, which changes
the log macro to DRM_DEV_DEBUG*.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
5 years agodrm/exynos: use DRM_DEV_ERROR to print out error message
Inki Dae [Mon, 15 Apr 2019 05:24:36 +0000 (14:24 +0900)]
drm/exynos: use DRM_DEV_ERROR to print out error message

This patch just cleans up the use of error log macro, which changes
the log macro to DRM_DEV_ERROR.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
5 years agodrm/exynos: remove unnecessary messages
Inki Dae [Mon, 15 Apr 2019 00:41:15 +0000 (09:41 +0900)]
drm/exynos: remove unnecessary messages

This patch removes unnecessary messages from fimd_clear_channels
and decon_clear_channels functions which print out just function
name.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
5 years agodrm/fimd: use DRM_ERROR instead of DRM_INFO in error case
Inki Dae [Mon, 15 Apr 2019 00:32:53 +0000 (09:32 +0900)]
drm/fimd: use DRM_ERROR instead of DRM_INFO in error case

This patch makes error messages to be printed out using DRM_ERROR
instead of DRM_INFO.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
5 years agodrm/exynos: g2d: remove style error
Seung-Woo Kim [Wed, 27 Mar 2019 05:07:09 +0000 (14:07 +0900)]
drm/exynos: g2d: remove style error

Remove checkpatch error, "foo* bar" should be "foo *bar".

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
5 years agoMerge tag 'drm-msm-next-2019-04-21' of https://gitlab.freedesktop.org/drm/msm into...
Dave Airlie [Wed, 24 Apr 2019 01:54:26 +0000 (11:54 +1000)]
Merge tag 'drm-msm-next-2019-04-21' of https://gitlab.freedesktop.org/drm/msm into drm-next

This time around it is a bunch of cleanup and fixes, expanding gpu
"zap" shader support (so we can take the GPU out of secure mode on
boot) to a6xx, and small UABI extension to support robustness (see
mesa MR 673).

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsHwsEfi4y2LYKSqeqDEYvffwVgKhiP8jHcHpxp13J5LQ@mail.gmail.com
5 years agoMerge branch 'drm-next-5.2' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Wed, 24 Apr 2019 01:24:22 +0000 (11:24 +1000)]
Merge branch 'drm-next-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-next

- Add the amdgpu specific bits for timeline support
- Add internal interfaces for xgmi pstate support
- DC Z ordering fixes for planes
- Add support for NV12 planes in DC
- Add colorspace properties for planes in DC
- eDP optimizations if the GOP driver already initialized eDP
- DC bandwidth validation tracing support

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419150034.3473-1-alexander.deucher@amd.com
5 years agoMerge tag 'drm/tegra/for-5.2-rc1' of git://anongit.freedesktop.org/tegra/linux into...
Dave Airlie [Wed, 24 Apr 2019 00:30:41 +0000 (10:30 +1000)]
Merge tag 'drm/tegra/for-5.2-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v5.2-rc1

This contains a fix for the usage of shared resets that previously
generated a WARN on boot. In addition, there's a fix for CPU cache
maintenance of GEM buffers allocated using get_pages().

(airlied: contains a merge from a shared tegra tree)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418151447.9430-1-thierry.reding@gmail.com
5 years agoMerge tag 'drm-misc-next-2019-04-18' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Wed, 24 Apr 2019 00:12:34 +0000 (10:12 +1000)]
Merge tag 'drm-misc-next-2019-04-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.2:

UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.

Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains

Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.

Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/737ad994-213d-45b5-207a-b99d795acd21@linux.intel.com
5 years agoMerge tag 'drm-intel-next-2019-04-17' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Wed, 24 Apr 2019 00:02:20 +0000 (10:02 +1000)]
Merge tag 'drm-intel-next-2019-04-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- uAPI "Fixes:" patch for the upcoming kernel 5.1, included here too

  We have an Ack from the media folks (only current user) for this
  late tweak

Cross-subsystem Changes:

- ALSA: hda: Fix racy display power access (Takashi, Chris)

Driver Changes:

- DDI and MIPI-DSI clocks fixes for Icelake (Vandita)
- Fix Icelake frequency change/locking (RPS) (Mika)
- Temporarily disable ppGTT read-only bit on Icelake (Mika)
- Add missing Icelake W/As (Mika)
- Enable 12 deep CSB status FIFO on Icelake (Mika)
- Inherit more Icelake code for Elkhartlake (Bob, Jani)

- Handle catastrophic error on engine reset (Mika)
- Shortcut readiness to reset check (Mika)
- Regression fix for GEM_BUSY causing us to report a mixed uabi-class request as not busy (Chris)
- Revert back to max link rate and lane count on eDP (Jani)
- Fix pipe BPP readout for BXT/GLK DSI (Ville)
- Set DP min_bpp to 8*3 for non-RGB output formats (Ville)
- Enable coarse preemption boundaries for Gen8 (Chris)
- Do not enable FEC without DSC (Ville)
- Restore correct BXT DDI latency optim setting calculation (Ville)
- Always reset context's RING registers to avoid running workload twice during reset (Chris)
- Set GPU wedged on driver unload (Janusz)
- Consolidate two similar barries from timeline into one (Chris)
- Only reset the pinned kernel contexts on resume (Chris)
- Wakeref tracking improvements (Chris, Imre)
- Lockdep fixes for shrinker interactions (Chris)
- Bump ready tasks ahead of busywaits in prep of semaphore use (Chris)

- Huge step in splitting display code into fine grained files (Jani)
- Refactor the IRQ init/reset macros for code saving (Paulo)
- Convert IRQ initialization code to uncore MMIO access (Paulo)
- Convert workarounds code to use uncore MMIO access (Chris)
- Nuke drm_crtc_state and use intel_atomic_state instead (Manasi)
- Update SKL clock-gating WA (Radhakrishna, Ville)
- Isolate GuC reset code flow (Chris)
- Expose force_dsc_enable through debugfs (Manasi)
- Header standalone compile testing framework (Jani)
- Code cleanups to reduce driver footprint (Chris)
- PSR code fixes and cleanups (Jose)
- Sparse and kerneldoc updates (Chris)
- Suppress spurious combo PHY B warning (Vile)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418080426.GA6409@jlahtine-desk.ger.corp.intel.com
5 years agoMerge branch 'vmwgfx-next' of https://gitlab.freedesktop.org/drawat/linux into drm...
Dave Airlie [Tue, 23 Apr 2019 21:21:30 +0000 (07:21 +1000)]
Merge branch 'vmwgfx-next' of https://gitlab.freedesktop.org/drawat/linux into drm-next

Resource dirtying improvement by Thomas,
user-space error logging improvement and
some other minor fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Deepak Rawat <drawat@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423211630.61874-1-drawat@vmware.com
5 years agodrm/msm/a6xx: Don't enable GPU state code if dependencies are missing
Jordan Crouse [Wed, 10 Apr 2019 16:58:16 +0000 (10:58 -0600)]
drm/msm/a6xx: Don't enable GPU state code if dependencies are missing

Add CONFIG_DRM_MSM_GPU_STATE to conditionally compile Adreno GPU state
code depending on the availability of the dependencies.

Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: YueHaibing <yuehaibing@huawei.com>
Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state")
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodt-bindings: drm/msm/gpu: Document a5xx / a6xx zap shader region
Jordan Crouse [Fri, 19 Apr 2019 19:46:16 +0000 (13:46 -0600)]
dt-bindings: drm/msm/gpu: Document a5xx / a6xx zap shader region

Describe the zap-shader node that defines a reserved memory region
to store the zap shader.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/a6xx: Add zap shader load
Jordan Crouse [Fri, 19 Apr 2019 19:46:15 +0000 (13:46 -0600)]
drm/msm/a6xx: Add zap shader load

The a6xx GPU powers on in secure mode which restricts what memory it can
write to. To get out of secure mode the GPU driver can write to
REG_A6XX_RBBM_SECVID_TRUST_CNTL but on targets that are "secure" that
register region is blocked and writes will cause the system to go down.

For those targets we need to execute a special sequence that involves
loadinga special shader that clears the GPU registers and use a PM4
sequence to pull the GPU out of secure. Add support for loading the zap
shader and executing the secure sequence. For targets that do not support
SCM or the specific SCM sequence this should fail and we would fall back
to writing the register.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/gpu: Move zap shader loading to adreno
Jordan Crouse [Fri, 19 Apr 2019 19:46:14 +0000 (13:46 -0600)]
drm/msm/gpu: Move zap shader loading to adreno

a5xx and a6xx both share (mostly) the same code to load the zap shader and
bring the GPU out of secure mode. Move the formerly 5xx specific code to
adreno to make it available for a6xx too.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodt-bindings: drm/msm/a6xx: Document interconnect properties for GPU
Jordan Crouse [Fri, 19 Apr 2019 19:56:27 +0000 (13:56 -0600)]
dt-bindings: drm/msm/a6xx: Document interconnect properties for GPU

Add documentation for the interconnect and interconnect-names bindings
for the GPU node as detailed by bindings/interconnect/interconnect.txt.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: Split submit_lookup_objects() into two loops
Kristian H. Kristensen [Wed, 20 Mar 2019 17:09:10 +0000 (10:09 -0700)]
drm/msm: Split submit_lookup_objects() into two loops

First loop does copy_from_user() without the table lock held and
just stores the handle. Second loop looks up buffer objects with the
table_lock held without potentially blocking or faulting. This lets us
clean up a bunch of custom, non-faulting copy_from_user() code.

Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: Stop dropping struct_mutex in recover_worker()
Kristian H. Kristensen [Wed, 20 Mar 2019 17:09:09 +0000 (10:09 -0700)]
drm/msm: Stop dropping struct_mutex in recover_worker()

Now that we don't have the mmap_sem lock inversion, we don't need to
jump through this particular hoop anymore.

Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: Implement .gem_free_object_unlocked
Kristian H. Kristensen [Wed, 20 Mar 2019 17:09:08 +0000 (10:09 -0700)]
drm/msm: Implement .gem_free_object_unlocked

We use a llist and a worker to delay the object cleanup. This avoids
taking mmap_sem and struct_mutex in the wrong order when calling
drm_gem_object_put_unlocked() from drm_gem_mmap().

Fixes lockdep problem with copy_from_user() in msm_ioctl_gem_submit().

Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/a6xx: Remove an unused struct member
Jordan Crouse [Mon, 4 Feb 2019 16:15:44 +0000 (09:15 -0700)]
drm/msm/a6xx: Remove an unused struct member

The HFI tasklet was removed in df0dff1 ("drm/msm/a6xx: Poll for HFI
responses") but the tasklet_struct was accidentally left behind.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agomsm/drm/a6xx: Turn off the GMU if resume fails
Jordan Crouse [Mon, 4 Feb 2019 16:15:43 +0000 (09:15 -0700)]
msm/drm/a6xx: Turn off the GMU if resume fails

Currently if the GMU resume function fails all we try to do is clear the
BOOT_SLUMBER oob which usually times out and ends up in a cycle of death.
If the resume function fails at any point remove any RPMh votes that might
have been added and try to shut down the GMU hardware cleanly.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/a6xx: Make GMU reset useful
Jordan Crouse [Mon, 4 Feb 2019 16:15:42 +0000 (09:15 -0700)]
drm/msm/a6xx: Make GMU reset useful

Now that the GX domain is sorted we can wire up a working GMU reset.
IF a GMU hang was detected then try to forcefully shut down the GMU
in the power down sequence which should ensure that it can recover
normally on the next power up.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/gpu: Attach to the GPU GX power domain
Jordan Crouse [Mon, 4 Feb 2019 16:15:41 +0000 (09:15 -0700)]
drm/msm/gpu: Attach to the GPU GX power domain

99.999% of the time during normal operation the GMU is responsible
for power and clock control on the GX domain and the CPU remains
blissfully unaware. However, there is one situation where the CPU
needs to get involved:

The power sequencing rules dictate that the GX needs to be turned
off before the CX so that the CX can be turned on before the GX
during power up. During normal operation when the CPU is taking
down the CX domain a stop command is sent to the GMU which turns
off the GX domain and then the CPU handles the CX domain.

But if the GMU happened to be unresponsive while the GX domain was
left then the CPU will need to step in and turn off the GX domain
before resetting the CX and rebooting the GMU. This unfortunately
means that the CPU needs to be marginally aware of the GX domain
even though it is expected to usually keep its hands off.

To support this we create a semi-disabled GX power domain that
does nothing to the hardware on power up but tries to shut it
down normally on power down. In this method the reference counting
is correct and we can step in with the pm_runtime_put() at the right
time during the failure path.

This patch sets up the connection to the GX power domain and does
the magic to "enable" and disable it at the right points.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodt-bindings: drm/msm/a6xx: Add GX power-domain for GMU bindings
Jordan Crouse [Mon, 4 Feb 2019 16:15:40 +0000 (09:15 -0700)]
dt-bindings: drm/msm/a6xx: Add GX power-domain for GMU bindings

The GMU should have two power domains defined: "cx" and "gx". "cx" is the
actual power domain for the device and "gx" will be attached at runtime
to manage reference counting on the GPU device in case of a GMU crash.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/a6xx: Remove unwanted regulator code
Jordan Crouse [Mon, 4 Feb 2019 16:15:39 +0000 (09:15 -0700)]
drm/msm/a6xx: Remove unwanted regulator code

The GMU code currently has some misguided code to try to work around
a hardware quirk that requires the power domains on the GPU be
collapsed in a certain order. Upcoming patches will do this the
right way so get rid of the unused and unwanted regulator
code.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/gpu: Add submit queue queries
Jordan Crouse [Fri, 22 Mar 2019 20:21:22 +0000 (14:21 -0600)]
drm/msm/gpu: Add submit queue queries

Add the capability to query information from a submit queue.
The first available parameter is for querying the number of GPU faults
(hangs) that can be attributed to the queue.

This is useful for implementing context robustness. A user context can
regularly query the number of faults to see if it is responsible for any
and if so it can invalidate itself.

This is also helpful for testing by confirming to the user  driver if a
particular command stream caused a fault (or not as the case may be).

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: add param to retrieve # of GPU faults (global)
Rob Clark [Tue, 16 Apr 2019 23:13:28 +0000 (16:13 -0700)]
drm/msm: add param to retrieve # of GPU faults (global)

For KHR_robustness, userspace wants to know two things, the count of GPU
faults globally, and the count of faults attributed to a given context.
This patch providees the former, and the next patch provides the latter.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
5 years agodrm/msm/gpu: add per-process pagetables param
Rob Clark [Mon, 15 Apr 2019 23:55:45 +0000 (16:55 -0700)]
drm/msm/gpu: add per-process pagetables param

For now it always returns '0' (false), but once the iommu work is in
place to enable per-process pagetables we can update the value returned.

Userspace needs to know this to make an informed decision about exposing
KHR_robustness.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
5 years agodrm/msm: a5xx: fix possible object reference leak
Wen Yang [Wed, 3 Apr 2019 16:04:11 +0000 (00:04 +0800)]
drm/msm: a5xx: fix possible object reference leak

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sharat Masetty <smasetty@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org (open list)
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: Cleanup A6XX opp-level reading
Douglas Anderson [Wed, 16 Jan 2019 18:46:22 +0000 (10:46 -0800)]
drm/msm: Cleanup A6XX opp-level reading

The patch ("OPP: Add support for parsing the 'opp-level' property")
adds an API enabling a cleaner way to read the opp-level.  Let's use
the new API.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/dpu: check split role for single flush
Jeykumar Sankaran [Thu, 14 Feb 2019 01:19:16 +0000 (17:19 -0800)]
drm/msm/dpu: check split role for single flush

Removing unwanted access of crtc_state for finding this information.
Use split role information to know whether we have slave ctl.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-8-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/dpu: assign intf to encoder in mode_set
Jeykumar Sankaran [Thu, 14 Feb 2019 01:19:15 +0000 (17:19 -0800)]
drm/msm/dpu: assign intf to encoder in mode_set

Iterate and assign HW intf block to physical encoders
in encoder modeset. Moving all the HW block assignments
to encoder modeset to allow easy switching to state
based resource management.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-7-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/dpu: map mixer/ctl hw blocks in encoder modeset
Jeykumar Sankaran [Thu, 14 Feb 2019 01:19:14 +0000 (17:19 -0800)]
drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset

After resource allocation, iterate and populate mixer/ctl
hw blocks in encoder modeset thereby centralizing all
the resource mapping to the CRTC. This change is made
for easy switching to state based allocation using
private objects later in this series.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-6-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/dpu: dont use encoder->crtc in atomic path
Jeykumar Sankaran [Thu, 14 Feb 2019 01:19:13 +0000 (17:19 -0800)]
drm/msm/dpu: dont use encoder->crtc in atomic path

encoder->crtc is not really meaningful for atomic path. Use
crtc->encoder_mask to identify the crtc attached with
an encoder.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-5-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/dpu: release resources on modeset failure
Jeykumar Sankaran [Thu, 14 Feb 2019 01:19:12 +0000 (17:19 -0800)]
drm/msm/dpu: release resources on modeset failure

release resources allocated in mode_set if any of
the hw check fails. Most of these checks are not
necessary and they will be removed in the follow up
patches with state based resource allocations.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-4-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/dpu: remove phys_vid subclass
Jeykumar Sankaran [Thu, 14 Feb 2019 01:19:11 +0000 (17:19 -0800)]
drm/msm/dpu: remove phys_vid subclass

Not holding any video encoder specific data. Get rid of it.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-3-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm/dpu: move hw_inf encoder baseclass
Jeykumar Sankaran [Thu, 14 Feb 2019 01:19:10 +0000 (17:19 -0800)]
drm/msm/dpu: move hw_inf encoder baseclass

Both video and command physical encoders will have
a hw interface assigned to it. So there is really no
need to track the hw block in specific encoder subclass.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-2-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: dpu: Don't set frame_busy_mask for async updates
Sean Paul [Wed, 30 Jan 2019 16:32:12 +0000 (11:32 -0500)]
drm/msm: dpu: Don't set frame_busy_mask for async updates

The frame_busy mask is used in frame_done event handling, which is not
invoked for async commits. So an async commit will leave the
frame_busy mask populated after it completes and future commits will start
with the busy mask incorrect.

This showed up on disable after cursor move. I was hitting the "this should
not happen" comment in the frame event worker since frame_busy was set,
we queued the event, but there were no frames pending (since async
also doesn't set that).

Reviewed-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163220.138637-1-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: dpu: Don't queue the frame_done watchdog for cursor
Sean Paul [Mon, 28 Jan 2019 20:42:51 +0000 (15:42 -0500)]
drm/msm: dpu: Don't queue the frame_done watchdog for cursor

In the case of an async/cursor update, we don't wait for the frame_done
event, which means handle_frame_done is never called, and the frame_done
watchdog isn't canceled. Currently, this results in a frame_done timeout
every time the cursor moves without a synchronous frame following it up
before the timeout expires. Since we don't wait for frame_done, and
don't handle it, we shouldn't modify the watchdog.

Reviewed-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-4-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: dpu: Untangle frame_done timeout units
Sean Paul [Mon, 28 Jan 2019 20:42:50 +0000 (15:42 -0500)]
drm/msm: dpu: Untangle frame_done timeout units

There exists a bunch of confusion as to what the actual units of
frame_done is:

- The definition states it's in # of frames
- CRTC treats it like it's ms
- frame_done_timeout comment thinks it's Hz, but it stores ms
- frame_done timer is setup such that it _should_ be in frames, but the
  timeout is super long

So this patch tries to interpret what the driver really wants. I've
de-centralized the #define since the consumers are expecting different
units.

For crtc, we just use 60ms since that's what it was doing before.
Perhaps we could get fancy and scale with vrefresh, but that's for
another time.

For encoder, fix the comments and rename frame_done_timeout so it's
obvious what the units are. In practice, frame_done_timeout is really
just checked against 0 || !0, which I guess is why the units being wrong
didn't matter. I've also dropped the timeout from the previous 60 frames
to 5. That seems like more than enough time to give up on a frame, and
my guess is that no one intended for the timeout to _actually_ be 60
frames.

Reviewed-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-3-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: dpu: Simplify frame_done watchdog timeout calculation
Sean Paul [Mon, 28 Jan 2019 20:42:49 +0000 (15:42 -0500)]
drm/msm: dpu: Simplify frame_done watchdog timeout calculation

Instead of setting the timeout and then immediately reading it back
(along with the hand-rolled msecs_to_jiffies calculation), just
calculate it once and set it in both places at the same time.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-2-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: Use drm_mode_vrefresh instead of mode->vrefresh
Sean Paul [Mon, 28 Jan 2019 20:42:48 +0000 (15:42 -0500)]
drm/msm: Use drm_mode_vrefresh instead of mode->vrefresh

Use the drm_mode_vrefresh helper where we need refresh rate in case
vrefresh is empty.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-1-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: Fix NULL pointer dereference
Luca Weiss [Sat, 2 Mar 2019 12:35:29 +0000 (13:35 +0100)]
drm/msm: Fix NULL pointer dereference

[    3.707412] Unable to handle kernel NULL pointer dereference at virtual address 0000009c
[    3.714511] pgd = (ptrval)
[    3.722742] [0000009c] *pgd=00000000
[    3.725238] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[    3.728968] Modules linked in:
[    3.734265] CPU: 3 PID: 112 Comm: kworker/3:2 Tainted: G        W         5.0.0-rc7-00183-g06a1c31df9eb #4
[    3.737142] Hardware name: Generic DT based system
[    3.746778] Workqueue: events deferred_probe_work_func
[    3.751542] PC is at msm_gem_map_vma+0x3c/0xac
[    3.756669] LR is at msm_gem_get_and_pin_iova+0xd8/0x134
[    3.761086] pc : [<c07d3b7c>]    lr : [<c07d14f8>]    psr: 60000013
[    3.766560] sp : ee297be8  ip : ed9ab1c0  fp : ed93b800
[    3.772546] r10: ee35e180  r9 : 00000000  r8 : ee297c80
[    3.777752] r7 : 00000000  r6 : 7c100000  r5 : 00000000  r4 : ee35e180
[    3.782968] r3 : 00000001  r2 : 00000003  r1 : ee35e180  r0 : 00000000
[    3.789562] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.796079] Control: 10c5787d  Table: 2e3a806a  DAC: 00000051
[    3.803282] Process kworker/3:2 (pid: 112, stack limit = 0x(ptrval))
[    3.809006] Stack: (0xee297be8 to 0xee298000)
[    3.815445] 7be0:                   00000000 c1108c48 eda8c000 00000003 eda8c0fc c1108c48
[    3.819715] 7c00: eda8c000 00000003 eda8c0fc c07d14f8 00000001 c07d1100 7c100000 00000000
[    3.827873] 7c20: eda8c000 bb7ffb78 00000000 eda8c000 00000000 00000000 c0c8b1d4 ee3bfa00
[    3.836037] 7c40: ee3b9800 c07d1684 00000000 c1108c48 ee0d7810 ee3b9800 c0c8b1d4 c07d222c
[    3.844193] 7c60: ee3bfd84 ee297c80 00000000 c0b1d5b0 ee3bfc40 c07dcfd8 ee3bfd84 ee297c80
[    3.852357] 7c80: 0000006d ee3bfc40 ee0d7810 bb7ffb78 c0c8b1d4 00000000 ee3bfc40 c07ddb48
[    3.860516] 7ca0: 00002004 c0eba384 ee3bfc40 c079eba0 ee3bd040 ee3b9800 00000001 ed93b800
[    3.868673] 7cc0: ed9aa100 c07db7e8 ee3bf240 ed9a6500 00000001 ee3b9800 ee3bf2d4 c07a0a30
[    3.876834] 7ce0: ed93b800 7d100000 c1108c48 ee0d7610 ee3b9800 ed93b800 c1108c48 00000000
[    3.884991] 7d00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.893151] 7d20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bb7ffb78
[    3.901310] 7d40: c12113c4 ed93b800 ee3b9800 c1108c48 ee9eec10 00000000 ed93b800 7d100000
[    3.909472] 7d60: eff7b000 c07cf748 7d100000 00000000 c0e9a350 c0b1d5b0 c12113c4 c0961e40
[    3.917633] 7d80: c12113c4 40000113 eeff4bec c0ebe004 00000019 c0b1d230 ee9eeda8 60000113
[    3.925791] 7da0: ee35d300 ee9eeda8 c07ce260 bb7ffb78 c07ce260 ee35d2c0 00000028 00000002
[    3.933950] 7dc0: eeb76280 c118f884 ee0be640 c11c6128 c07ce260 c07ea4ac 00000000 c0962b48
[    3.942108] 7de0: c118f868 00000001 c0ebbc98 ee35d2c0 00000000 eeb76280 00000000 c118f87c
[    3.950270] 7e00: ee35d2c0 00000000 c11c63e0 c118f694 00000019 c07ea5d0 ee0d7810 00000000
[    3.958430] 7e20: c118f694 00000000 00000000 c07f2b0c c120f55c ee0d7810 c120f560 00000000
[    3.966590] 7e40: 00000000 c07f08c4 c07f0e8c ee0d7810 c11ba3d0 ee0d7810 c118f694 c07f0e8c
[    3.974748] 7e60: c1108c48 00000001 c0ebc3cc c11c63f8 c11ba3d0 c07f0c08 00000001 c07f2f8c
[    3.982908] 7e80: c118f694 00000000 ee297ed4 c07f0e8c c1108c48 00000001 c0ebc3cc c11c63f8
[    3.991068] 7ea0: c11ba3d0 c07ee8a0 c11ba3d0 ee82686c ee0baf38 bb7ffb78 ee0d7810 ee0d7810
[    3.999227] 7ec0: c1108c48 ee0d7844 c118faac c07f05b0 ee0d7810 ee0d7810 00000001 bb7ffb78
[    4.007389] 7ee0: ee0d7810 ee0d7810 c118fd18 c118faac c11c63e0 c07ef7d0 ee0d7810 c118fa90
[    4.015548] 7f00: c118fa90 c07efd68 c118fac8 ee27fe00 eefd9c80 eefdcd00 00000000 c118facc
[    4.023708] 7f20: 00000000 c033c038 eefd9c80 eefd9c80 00000008 ee27fe00 ee27fe14 eefd9c80
[    4.031866] 7f40: 00000008 c1103d00 eefd9c98 ee296000 eefd9c80 c033ce54 ee907eac c0b1d230
[    4.040026] 7f60: ee907eac eea24440 ee285000 00000000 ee296000 ee27fe00 c033ce24 eea2445c
[    4.048188] 7f80: ee907eac c0341db0 00000000 ee285000 c0341c8c 00000000 00000000 00000000
[    4.056346] 7fa0: 00000000 00000000 00000000 c03010e8 00000000 00000000 00000000 00000000
[    4.064505] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.072665] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    4.080828] [<c07d3b7c>] (msm_gem_map_vma) from [<c07d14f8>] (msm_gem_get_and_pin_iova+0xd8/0x134)
[    4.088983] [<c07d14f8>] (msm_gem_get_and_pin_iova) from [<c07d1684>] (_msm_gem_kernel_new+0x38/0xac)
[    4.097839] [<c07d1684>] (_msm_gem_kernel_new) from [<c07d222c>] (msm_gem_kernel_new+0x24/0x2c)
[    4.107130] [<c07d222c>] (msm_gem_kernel_new) from [<c07dcfd8>] (dsi_tx_buf_alloc_6g+0x44/0x90)
[    4.115631] [<c07dcfd8>] (dsi_tx_buf_alloc_6g) from [<c07ddb48>] (msm_dsi_host_modeset_init+0x80/0x104)
[    4.124313] [<c07ddb48>] (msm_dsi_host_modeset_init) from [<c07db7e8>] (msm_dsi_modeset_init+0x34/0x1c0)
[    4.133691] [<c07db7e8>] (msm_dsi_modeset_init) from [<c07a0a30>] (mdp5_kms_init+0x764/0x7e0)
[    4.143409] [<c07a0a30>] (mdp5_kms_init) from [<c07cf748>] (msm_drm_bind+0x56c/0x740)
[    4.151824] [<c07cf748>] (msm_drm_bind) from [<c07ea4ac>] (try_to_bring_up_master+0x238/0x2b4)
[    4.159636] [<c07ea4ac>] (try_to_bring_up_master) from [<c07ea5d0>] (component_add+0xa8/0x170)
[    4.168146] [<c07ea5d0>] (component_add) from [<c07f2b0c>] (platform_drv_probe+0x48/0x9c)
[    4.176737] [<c07f2b0c>] (platform_drv_probe) from [<c07f08c4>] (really_probe+0x278/0x404)
[    4.184981] [<c07f08c4>] (really_probe) from [<c07f0c08>] (driver_probe_device+0x78/0x1c0)
[    4.193147] [<c07f0c08>] (driver_probe_device) from [<c07ee8a0>] (bus_for_each_drv+0x74/0xb8)
[    4.201389] [<c07ee8a0>] (bus_for_each_drv) from [<c07f05b0>] (__device_attach+0xd0/0x164)
[    4.209984] [<c07f05b0>] (__device_attach) from [<c07ef7d0>] (bus_probe_device+0x84/0x8c)
[    4.218143] [<c07ef7d0>] (bus_probe_device) from [<c07efd68>] (deferred_probe_work_func+0x48/0xc4)
[    4.226398] [<c07efd68>] (deferred_probe_work_func) from [<c033c038>] (process_one_work+0x204/0x574)
[    4.235254] [<c033c038>] (process_one_work) from [<c033ce54>] (worker_thread+0x30/0x560)
[    4.244534] [<c033ce54>] (worker_thread) from [<c0341db0>] (kthread+0x124/0x154)
[    4.252606] [<c0341db0>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
[    4.259966] Exception stack(0xee297fb0 to 0xee297ff8)
[    4.266998] 7fa0:                                     00000000 00000000 00000000 00000000
[    4.272143] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.280297] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    4.288451] Code: e5813080 1a000013 e3a03001 e5c4307c (e590009c)
[    4.294933] ---[ end trace 18729cc2bca2b4b3 ]---

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: Remove pm_runtime calls from msm_iommu.c
Jordan Crouse [Tue, 19 Feb 2019 18:48:20 +0000 (11:48 -0700)]
drm/msm: Remove pm_runtime calls from msm_iommu.c

Currently the IOMMU code calls pm_runtime_get/put on the GPU or display
device before doing a IOMMU operation. This was because usually the
IOMMU driver didn't do power control of its own and since the hardware
used the same clocks and power as the respective multimedia device it
was a easy way to make sure that the power was available.

Now two things have changed. First, the SMMU devices can do their own power
control and more important bringing up the a6xx GPU isn't as easy as
turning on some clocks. To bring the GPU up we need the GMU which itself
needs the IOMMU so we have a chicken and egg problem.

Luckily this is easily fixed by removing the pm_runtime calls from the
functions and letting the device link to the IOMMU device handle the magic.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/msm: don't allocate pages from the MOVABLE zone
Lucas Stach [Thu, 28 Feb 2019 06:23:29 +0000 (07:23 +0100)]
drm/msm: don't allocate pages from the MOVABLE zone

The pages backing the GEM objects are kept pinned in place as
long as they are alive, so they must not be allocated from the
MOVABLE zone. Blocking page migration for too long will cause
the VM subsystem headaches and will outright break CMA, as a
few pinned pages in CMA will lead to failure to find the
required large contiguous regions.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
5 years agodrm/tegra: gem: Fix CPU-cache maintenance for BO's allocated using get_pages()
Dmitry Osipenko [Wed, 6 Mar 2019 22:55:19 +0000 (01:55 +0300)]
drm/tegra: gem: Fix CPU-cache maintenance for BO's allocated using get_pages()

The allocated pages need to be invalidated in CPU caches. On ARM32 the
DMA_BIDIRECTIONAL flag only ensures that data is written-back to DRAM and
the data stays in CPU cache lines. While the DMA_FROM_DEVICE flag ensures
that the corresponding CPU cache lines are getting invalidated and nothing
more, that's exactly what is needed for a newly allocated pages.

This fixes randomly failing rendercheck tests on Tegra30 using the
Opentegra driver for tests that use small-sized pixmaps (10x10 and less,
i.e. 1-2 memory pages) because apparently CPU reads out stale data from
caches and/or that data is getting evicted to DRAM at the time of HW job
execution.

Fixes: bd43c9f0fa1f ("drm/tegra: gem: Map pages via the DMA API")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
5 years agodrm/panel: simple: add lg,acx467akm-7 panel
Jonathan Marek [Sat, 24 Nov 2018 20:06:28 +0000 (15:06 -0500)]
drm/panel: simple: add lg,acx467akm-7 panel

Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus
5 (hammerhead) phone.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[masneyb@onstation.org: checkpatch fixes; rename jdi,1080p-hammerhead
binding to lg,acx467akm-7.]
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-2-masneyb@onstation.org
5 years agodt-bindings: drm/panel: simple: add lg,acx467akm-7 panel
Brian Masney [Sat, 24 Nov 2018 20:06:27 +0000 (15:06 -0500)]
dt-bindings: drm/panel: simple: add lg,acx467akm-7 panel

Add binding for the LG ACX467AKM-7 4.95" 1080×1920 LCD panel that is
found on the LG Nexus 5 (hammerhead) phone. This appears to be a JDI
panel based on some Internet searches, however a specific model number
could not be found. I disassembled an old Nexus 5 with a broken
screen and the LG part number is the only model number present on the
back of the panel, so I think that is probably the best ID to use.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-1-masneyb@onstation.org
5 years agodrm/mcde: Add device tree bindings
Linus Walleij [Tue, 16 Apr 2019 14:28:44 +0000 (16:28 +0200)]
drm/mcde: Add device tree bindings

This adds the device tree bindings for the ST-Ericsson
Multi Channel Display Engine MCDE as found in the U8500
SoCs.

Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416142844.12038-1-linus.walleij@linaro.org
5 years agoRevert "drm: allow render capable master with DRM_AUTH ioctls"
Dave Airlie [Wed, 17 Apr 2019 20:46:33 +0000 (06:46 +1000)]
Revert "drm: allow render capable master with DRM_AUTH ioctls"

This reverts commit 8059add0478e29cb641936011a8fcc9ce9fd80be.

This commit while seemingly a good idea, breaks a radv check,
for a node being master because something succeeds where it failed
before now.

Apply the Linus rule, revert early and try again, we don't break
userspace.

Signed-off-by: Dave Airlie <airlied@redhat.com>
5 years agodrm/drv: Fix incorrect resolution of merge conflict
Janusz Krzysztofik [Wed, 17 Apr 2019 13:32:31 +0000 (15:32 +0200)]
drm/drv: Fix incorrect resolution of merge conflict

Commit f06ddb53096b ("BackMerge v5.1-rc5 into drm-next") incorrectly
resolved a merge conflict related to a patch having been merged twice:
- commit 3f04e0a6cfeb ("drm: Fix drm_release() and device unplug")
  introduced as a standalone fix via drm-fixes branch,
- commit 1ee57d4d75fb ("drm: Fix drm_release() and device unplug")
  applied as patch 1/2 of a series on drm-next branch.
That incorrect resolution of the conflict effectively reverted a change
introduced to drivers/gpu/drm/drm_drv.c by patch 2/2 of that series -
commit ba3bf37e150a ("drm/drv: drm_dev_unplug(): Move out drm_dev_put()
call").  Fix it.

Fixes: f06ddb53096b ("BackMerge v5.1-rc5 into drm-next")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190417133232.16232-1-janusz.krzysztofik@linux.intel.com
5 years agodrm/meson: add size and alignment requirements for dumb buffers
Neil Armstrong [Mon, 8 Apr 2019 09:01:37 +0000 (11:01 +0200)]
drm/meson: add size and alignment requirements for dumb buffers

The Amlogic SoCs Canvas buffers stride must be aligned on 64bytes
and overall size should be aligned on PAGE width.

Adds a custom dumb_create op to adds these requirements.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Suggested-by: Sky Zhou <sky.zhou@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sky Zhou <sky.zhou@amlogic.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408090137.2402-1-narmstrong@baylibre.com
5 years agodrm/meson: Make some functions static
YueHaibing [Sat, 13 Apr 2019 14:14:55 +0000 (22:14 +0800)]
drm/meson: Make some functions static

Fix sparse warnings:

drivers/gpu/drm/meson/meson_viu.c:93:6: warning: symbol 'meson_viu_set_g12a_osd1_matrix' was not declared. Should it be static?
drivers/gpu/drm/meson/meson_viu.c:121:6: warning: symbol 'meson_viu_set_osd_matrix' was not declared. Should it be static?
drivers/gpu/drm/meson/meson_viu.c:190:6: warning: symbol 'meson_viu_set_osd_lut' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190413141455.34020-1-yuehaibing@huawei.com
5 years agodrm/sun4i: Make some symbols static
YueHaibing [Tue, 16 Apr 2019 14:58:55 +0000 (22:58 +0800)]
drm/sun4i: Make some symbols static

Fix sparse warnings:

drivers/gpu/drm/sun4i/sun8i_tcon_top.c:271:36: warning: symbol 'sun8i_r40_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun8i_tcon_top.c:276:36: warning: symbol 'sun50i_h6_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun4i_tcon.c:239:6: warning: symbol 'sun4i_tcon_set_mux' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416145855.20852-1-yuehaibing@huawei.com
5 years agodrm/lima: Make lima_sched_ops static
YueHaibing [Tue, 16 Apr 2019 14:43:53 +0000 (22:43 +0800)]
drm/lima: Make lima_sched_ops static

Fix sparse warning:

drivers/gpu/drm/lima/lima_sched.c:356:36: warning:
 symbol 'lima_sched_ops' was not declared. Should it be static?

Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416144353.34024-1-yuehaibing@huawei.com
5 years agodrm/i915: Update DRIVER_DATE to 20190417
Joonas Lahtinen [Wed, 17 Apr 2019 09:07:47 +0000 (12:07 +0300)]
drm/i915: Update DRIVER_DATE to 20190417

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
5 years agodrm/i915/ehl: inherit icl cdclk init/uninit
Jani Nikula [Tue, 16 Apr 2019 08:28:52 +0000 (11:28 +0300)]
drm/i915/ehl: inherit icl cdclk init/uninit

The cdclk init/uninit code was changed by commit 93a643f29bcb
("drm/i915/cdclk: have only one init/uninit function") between the
versions of commit 39564ae86d51 ("drm/i915/ehl: Inherit Ice Lake
conditional code"). What got merged fails to do cdclk init/uninit on
ehl.

Fixes: 39564ae86d51 ("drm/i915/ehl: Inherit Ice Lake conditional code")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416082852.18141-1-jani.nikula@intel.com
5 years agodrm: add drm_format_helper.c to kerneldoc
Gerd Hoffmann [Tue, 16 Apr 2019 09:05:33 +0000 (11:05 +0200)]
drm: add drm_format_helper.c to kerneldoc

Also drop the dstclip parameter sphinx has warned about (leftover from
an earlier patch version).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190416090533.28374-1-kraxel@redhat.com
5 years agodrm/i915: Introduce struct class_instance for engines across the uAPI
Chris Wilson [Fri, 12 Apr 2019 07:14:16 +0000 (08:14 +0100)]
drm/i915: Introduce struct class_instance for engines across the uAPI

SSEU reprogramming of the context introduced the notion of engine class
and instance for a forwards compatible method of describing any engine
beyond the old execbuf interface. We wish to adopt this class:instance
description for more interfaces, so pull it out into a separate type for
userspace convenience.

Fixes: e46c2e99f600 ("drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Andi Shyti <andi@etezian.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412071416.30097-1-chris@chris-wilson.co.uk
5 years agodrm/lima: Use the drm_gem_fence_array_add helpers for our deps.
Eric Anholt [Mon, 1 Apr 2019 22:26:35 +0000 (15:26 -0700)]
drm/lima: Use the drm_gem_fence_array_add helpers for our deps.

It's a pretty direct port of what I did for v3d.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-8-eric@anholt.net
Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com>
5 years agodrm: Add helpers for setting up an array of dma_fence dependencies.
Eric Anholt [Mon, 1 Apr 2019 22:26:33 +0000 (15:26 -0700)]
drm: Add helpers for setting up an array of dma_fence dependencies.

I needed to add implicit dependency support for v3d, and Rob Herring
has been working on it for panfrost, and I had recently looked at the
lima implementation so I think this will be a good intersection of
what we all want and simplify our scheduler implementations.

v2: Rebase on xa_limit_32b API change, and tiny checkpatch cleanups on
    the way in (unsigned int vs unsigned, extra return before
    EXPORT_SYMBOL_GPL)

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-6-eric@anholt.net
Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com> (v1)
5 years agodrm: Expose "FB_DAMAGE_CLIPS" property to atomic aware user-space only
Deepak Rawat [Mon, 15 Apr 2019 17:28:05 +0000 (10:28 -0700)]
drm: Expose "FB_DAMAGE_CLIPS" property to atomic aware user-space only

Plane property "FB_DAMAGE_CLIPS" can only be used by atomic aware
user-space, so no point exposing it otherwise.

Cc: <stable@vger.kernel.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update")
Link: https://patchwork.freedesktop.org/patch/msgid/20190415172814.9840-1-drawat@vmware.com
5 years agodrm/i915: fully convert the IRQ initialization macros to intel_uncore
Paulo Zanoni [Wed, 10 Apr 2019 23:53:44 +0000 (16:53 -0700)]
drm/i915: fully convert the IRQ initialization macros to intel_uncore

Make them take the uncore argument from the caller instead of passing
the implicit &dev_priv->uncore directly. This will allow us to finally
pass something that's not dev_priv->uncore in the future, and gets rid
of the implicit variables in register macros.

v2: Rebase on top of the newer patches.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-6-paulo.r.zanoni@intel.com
5 years agodrm/i915: convert the IRQ initialization functions to intel_uncore
Paulo Zanoni [Wed, 10 Apr 2019 23:53:43 +0000 (16:53 -0700)]
drm/i915: convert the IRQ initialization functions to intel_uncore

The IRQ initialization helpers are simple and self-contained. Continue
the transition started in the recent uncore rework to get us rid of
I915_READ/WRITE and the implicit dev_priv variables.

While the implicit dev_priv is removed from the IRQ initialization
helpers, we didn't get rid of them in the macro callers. Doing that
should be very simple now.

v2: Rebase on top of the new patches.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-5-paulo.r.zanoni@intel.com
5 years agodrm/i915: add GEN2_ prefix to the I{E, I, M, S}R registers
Paulo Zanoni [Wed, 10 Apr 2019 23:53:42 +0000 (16:53 -0700)]
drm/i915: add GEN2_ prefix to the I{E, I, M, S}R registers

This discussion started because we use token pasting in the
GEN{2,3}_IRQ_INIT and GEN{2,3}_IRQ_RESET macros, so gen2-4 passes an
empty argument to those macros, making the code a little weird. The
original proposal was to just add a comment as the empty argument, but
Ville suggested we just add a prefix to the registers, and that indeed
sounds like a more elegant solution.

Now doing this is kinda against our rules for register naming since we
only add gens or platform names as register prefixes when the given
gen/platform changes a register that already existed before. On the
other hand, we have so many instances of IIR/IMR in comments that
adding a prefix would make the users of these register more easily
findable, in addition to make our token pasting macros actually
readable. So IMHO opening an exception here is worth it.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-4-paulo.r.zanoni@intel.com
5 years agodrm/i915: don't specify the IRQ register in the gen2 macros
Paulo Zanoni [Wed, 10 Apr 2019 23:53:41 +0000 (16:53 -0700)]
drm/i915: don't specify the IRQ register in the gen2 macros

Like the gen3+ macros, the gen2 versions of the IRQ initialization
macros take the register name in the 'type' argument. But gen2 only
has one set of registers, so there's really no need to specify the
type. This commit removes the type argument and uses the registers
directly instead of passing them through variables.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-3-paulo.r.zanoni@intel.com
5 years agodrm/i915: refactor the IRQ init/reset macros
Paulo Zanoni [Wed, 10 Apr 2019 23:53:40 +0000 (16:53 -0700)]
drm/i915: refactor the IRQ init/reset macros

The whole point of having macros here is for the token pasting
necessary to automatically have IMR, IIR and IER selected. We don't
really need or want all the inlining that happens as a consequence.
The good thing about the current code is that it works regardless of
the relative offsets between these registers (they change after gen4,
with the usual VLV/CHV exceptions).

One thing which we can do is to split the logic of what we do with
imr/ier/iir to functions separate from the macros that pick them.
That's what we do in this commit. This allows us to get rid of the
gen8 duplicates and also all the inlining:

add/remove: 2/0 grow/shrink: 0/21 up/down: 384/-5949 (-5565)
Function                                     old     new   delta
gen3_irq_reset                                 -     233    +233
gen3_irq_init                                  -     151    +151
i8xx_irq_postinstall                         459     442     -17
gen11_irq_postinstall                        804     744     -60
ironlake_irq_postinstall                     450     353     -97
vlv_display_irq_postinstall                  348     245    -103
i965_irq_postinstall                         378     272    -106
i915_irq_postinstall                         333     227    -106
gen8_irq_power_well_post_enable              374     240    -134
ironlake_irq_reset                           397     218    -179
vlv_display_irq_reset                        616     433    -183
i965_irq_reset                               374     180    -194
cherryview_irq_reset                         379     185    -194
i915_irq_reset                               407     209    -198
ibx_irq_reset                                332     133    -199
gen5_gt_irq_postinstall                      533     332    -201
gen8_irq_power_well_pre_disable              434     204    -230
gen8_gt_irq_postinstall                      469     196    -273
gen8_de_irq_postinstall                     1200     836    -364
gen5_gt_irq_reset                            471      76    -395
gen8_gt_irq_reset                            775      99    -676
gen8_irq_reset                              1100     333    -767
gen11_irq_reset                             1959     686   -1273
Total: Before=2259222, After=2253657, chg -0.25%

v2:
 - Make checkpatch happy with a temporary which_ (Checkpatch).
 - Reorder the arguments for the INIT macros (Ville).
 - Correctly explain when the register offsets change in the commit
   message (Ville).
 - Use more line breaks in the macro calls to make the arguments look
   a little more organized/readable.
 - Update the bloat-o-meter output (minor change only).

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-2-paulo.r.zanoni@intel.com
5 years agodrm: aspeed: Clean up Kconfig options
Joel Stanley [Fri, 5 Apr 2019 08:11:17 +0000 (18:41 +1030)]
drm: aspeed: Clean up Kconfig options

The GFX IP is inside of the ASPEED BMC SoC so there is little use
enabling it on a kernel that does not support ASPEED.

When building with COMPILE_TEST the architecture many not have CMA
support, so to avoid breaking the build we only select these options if
the architecture supports the contiguous allocator.

I suspect the DRM_PANEL came from a cut/paste error.

Fixes: 4f2a8f5898ec ("drm: Add ASPEED GFX driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405081117.27339-1-joel@jms.id.au
5 years agoMerge tag 'gvt-next-2019-04-16' of https://github.com/intel/gvt-linux into drm-intel...
Joonas Lahtinen [Tue, 16 Apr 2019 13:45:26 +0000 (16:45 +0300)]
Merge tag 'gvt-next-2019-04-16' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2019-04-16

- Refine range of MCHBAR snapshot (Yakui)
- Refine out-of-sync page struct (Yakui)
- Remove unused vGPU sreg (Yan)
- Refind MMIO reg names (Xiaolin)
- Proper handling of sync/async flip (Colin)
- Proper handling of PIPE_CONTROL/MI_FLUSH_DW index mode (Xiaolin)
- EXCC reg mask fix (Colin)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416084814.GH17995@zhen-hp.sh.intel.com
5 years agodma-buf: explicitely note that dma-fence-chains use 64bit seqno
Christian König [Mon, 15 Apr 2019 12:46:34 +0000 (14:46 +0200)]
dma-buf: explicitely note that dma-fence-chains use 64bit seqno

Instead of checking the upper values of the sequence number use an explicit
field in the dma_fence_ops structure to note if a sequence should be 32bit
or 64bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/299655/
5 years agodrm/i915: Mark up ips for RCU protection
Chris Wilson [Fri, 12 Apr 2019 08:53:22 +0000 (09:53 +0100)]
drm/i915: Mark up ips for RCU protection

drivers/gpu/drm/i915/intel_pm.c:8352:9: error: incompatible types in comparison expression (different address spaces)
drivers/gpu/drm/i915/intel_pm.c:8359:9: error: incompatible types in comparison expression (different address spaces)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412085410.10392-3-chris@chris-wilson.co.uk
5 years agodrm/i915: Drop bool return from breadcrumbs signaler
Chris Wilson [Tue, 16 Apr 2019 08:52:18 +0000 (09:52 +0100)]
drm/i915: Drop bool return from breadcrumbs signaler

Since removal of the "missed interrupt detection" nobody used the result
of whether or not we signaled anybody during that invocation, so now
remove the return value.

References: 789659f4307a ("drm/i915: Drop fake breadcrumb irq")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416085218.431-1-chris@chris-wilson.co.uk
5 years agodrm/i915/gvt: Fix incorrect mask of mmio 0x22028 in gen8/9 mmio list
Colin Xu [Mon, 1 Apr 2019 06:13:53 +0000 (14:13 +0800)]
drm/i915/gvt: Fix incorrect mask of mmio 0x22028 in gen8/9 mmio list

According to GFX PRM on 01.org, bit 31:16 of mmio 0x22028 should be masks.

Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agodrm/i915/gvt: addressed guest GPU hang with HWS index mode
Xiaolin Zhang [Wed, 3 Apr 2019 08:28:04 +0000 (16:28 +0800)]
drm/i915/gvt: addressed guest GPU hang with HWS index mode

with the introduce of "switch to use HWS indices rather than address",
guest GPU hang observed when running workloads which will update the
seqno to the real HW HWSP, not vitural GPU HWSP and then cause GPU hang.

this patch is to revoke index mode in PIPE_CTRL and MI_FLUSH_DW and
patch guest GPU HWSP address value to these commands.

Fixes: 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agoMerge tag 'drm-intel-next-2019-04-04' into gvt-next
Zhenyu Wang [Tue, 16 Apr 2019 08:50:34 +0000 (16:50 +0800)]
Merge tag 'drm-intel-next-2019-04-04' into gvt-next

Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
that would need gvt fixes to depend on.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agodrm/i915: Nuke drm_crtc_state and use intel_atomic_state instead
Manasi Navare [Mon, 15 Apr 2019 18:22:10 +0000 (11:22 -0700)]
drm/i915: Nuke drm_crtc_state and use intel_atomic_state instead

This is one of the patches to start replacing drm pointers
and use the intel_atomic_state and intel_crtc to derive
the necessary intel state variables required for the intel
modeset functions.

v3:
* Remove the unwanted newline (Ville)
v2:
* Flip the function arguments (Ville)
* Remove some remaining instances of drm pointers (Ville)
* Use old_crtc_state and new_crtc_state (Ville)

Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190415182210.13347-1-manasi.d.navare@intel.com
5 years agodrm/i915/selftests: Skip live timeline/suspend tests if wedged
Chris Wilson [Sat, 13 Apr 2019 12:58:20 +0000 (13:58 +0100)]
drm/i915/selftests: Skip live timeline/suspend tests if wedged

If the driver is wedged, we can not issue the requests to exercise the
timelines or the system across suspend, so skip the tests. live_hangcheck
is there to fail if we cannot recover.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190413125820.14112-4-chris@chris-wilson.co.uk
5 years agoBackMerge v5.1-rc5 into drm-next
Dave Airlie [Mon, 15 Apr 2019 05:51:49 +0000 (15:51 +1000)]
BackMerge v5.1-rc5 into drm-next

Need rc5 for udl fix to add udl cleanups on top.

Signed-off-by: Dave Airlie <airlied@redhat.com>
5 years agodrm/amd/display: Add profiling tools for bandwidth validation
Joshua Aberback [Mon, 1 Apr 2019 19:21:24 +0000 (15:21 -0400)]
drm/amd/display: Add profiling tools for bandwidth validation

[Why]
We used this change to investigate the performance of bandwidth validation,
it will be useful to have if we need to investigate further.

[How]
We use performance counter tick numbers to profile performance, they live
at dc->debug.bw_val_profile (set .enable in debugger to turn on measuring).

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Add fast_validate parameter
Joshua Aberback [Mon, 1 Apr 2019 19:18:29 +0000 (15:18 -0400)]
drm/amd/display: Add fast_validate parameter

Add a fast_validate parameter in dc_validate_global_state for future use

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Relax requirements for CRTCs to be enabled
Nicholas Kazlauskas [Fri, 29 Mar 2019 18:58:32 +0000 (14:58 -0400)]
drm/amd/display: Relax requirements for CRTCs to be enabled

[Why]
As long as we have at least one non-cursor plane enabled on a CRTC then
the CRTC itself can remain enabled.

This will allow for commits where there's an overlay plane enabled but
no primary plane enabled.

[How]
Remove existing primary plane fb != NULL checks and replace them with
the new does_crtc_have_active_plane helper.

This will be called from atomic check when validating the CRTC.

Since the primary plane state can now potentially be NULL we'll need
to guard for that when accessing it in some of the cursor logic.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Check scaling info when determing update type
Nicholas Kazlauskas [Thu, 28 Mar 2019 19:50:06 +0000 (15:50 -0400)]
drm/amd/display: Check scaling info when determing update type

[Why]
Surface scaling info updates can affect bandwidth and blocks. We need
to be checking these with global validation to avoid underflow or
corruption.

[How]
Drop the state->allow_modeset early exit in
dm_determine_update_type_for_commit. Most of those should be considered
fast now anyway.

Fill in scaling info and it to the surface update in atomic
check.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Don't warn when DC update type > DM guess
Nicholas Kazlauskas [Fri, 29 Mar 2019 15:40:43 +0000 (11:40 -0400)]
drm/amd/display: Don't warn when DC update type > DM guess

[Why]
DM thinks that the update type should be full whenever a stream or
plane is added or removed (including recreations).

This won't match in the case where DC thinks what looks like a fast
update to DM is actually a medium or full - like scaling changes that
affect bandwidth and clocks.

[How]
Drop this warning. DC knows better than the DM does for determining
cases like this.

The other warning can be kept for now since it would warn on a pretty
serious DC or DM bug.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Use surface directly when checking update type
Nicholas Kazlauskas [Thu, 10 Jan 2019 14:32:31 +0000 (09:32 -0500)]
drm/amd/display: Use surface directly when checking update type

[Why]
DC expects the surface memory address to identify the surface.

This doesn't work with what we're doing with the temporary surfaces,
it will always assume this is a full update because the surface
isn't in the current context.

[How]
Use the surface directly. This doesn't give us much improvement yet,
since we always create a new dc_plane_state when state->allow_modeset
is true.

The call into dc_check_update_surfaces_for_stream also needs to be
locked, for two reasons:

1. It checks the current DC state
2. It modifies the surface update flags

Both of which could be currently in the middle of commit work from
commit tail.

A TODO here is to pass the context explicitly into this function and
find a way to get the surface update flags out of it without modifying
the surface in place.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Add basic downscale and upscale valdiation
Nicholas Kazlauskas [Mon, 1 Apr 2019 13:43:34 +0000 (09:43 -0400)]
drm/amd/display: Add basic downscale and upscale valdiation

[Why]
Planes have downscaling limits and upscaling limits per format and DM
is expected to validate these using DC caps. We should fail atomic
check validation if we aren't capable of doing the scaling.

[How]
We don't currently create store which DC plane maps to which DRM plane
so we can't easily check the caps directly. For now add basic
constraints that cover the absolute min and max downscale / upscale
limits for most RGB and YUV formats across ASICs.

Leave a TODO indicating that these should really be done with DC caps.
We'll probably need to subclass DRM planes again in order to correctly
identify which DC plane maps to it.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: change name from dc_link_get_verified_link_cap to dc_link_get_link_cap
Samson Tam [Mon, 1 Apr 2019 21:07:21 +0000 (17:07 -0400)]
drm/amd/display: change name from dc_link_get_verified_link_cap to dc_link_get_link_cap

[Why]
DM doesn't need to know which link cap is being retrieved ( verified
 or preferred ).  Let DC figure it out.

[How]
Change name.

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Rework DC plane filling and surface updates
Nicholas Kazlauskas [Thu, 28 Mar 2019 18:45:19 +0000 (14:45 -0400)]
drm/amd/display: Rework DC plane filling and surface updates

[Why]
We currently don't do DC validation for medium or full updates where
the plane state isn't created. There are some medium and full updates
that can cause bandwidth or clock changes to occur resulting in
underflow or corruption.

We need to be able to fill surface and plane info updates during
atomic commit for dm_determine_update_type for commit. Since we already
do this during atomic commit tail it would be good if we had the same
logic in both places for creating these structures.

[How]
Introduce fill_dc_scaling_info and fill_dc_plane_info_and_addr.
These two functions cover the following three update structures:

- struct dc_scaling_info
- struct dc_plane_info
- struct dc_plane_address

Cleanup and adapter the existing fill_plane_* helpers to work with
these functions.

Update call sites that used most of these sub helpers directly to work
with the new functions. The exception being prepare_fb - we just want
the new buffer attributes specifically in the case where we're
creating the plane. This is needed for dc_commit_state in the case
where the FB hasn't been previously been used.

This isn't quite a refactor, but functionally driver behavior should
be mostly the smae as before. The one exception is that we now check
the return code for fill_plane_buffer_attributes which means that
commits will be rejected that try to enable DCC with erroneous
parameters.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Recalculate pitch when buffers change
Nicholas Kazlauskas [Thu, 28 Mar 2019 13:46:23 +0000 (09:46 -0400)]
drm/amd/display: Recalculate pitch when buffers change

[Why]
Pitch was only calculated based on format whenever the plane state
was recreated. This could result in surface corruption due to the
incorrect pitch being programmed when the surface pitch changed during
commits where state->allow_modeset = false.

[How]
Recalculate pitch at the same time we update the buffer address and
other buffer attributes. This function was previously called
fill_plane_tiling_attributes but I've also renamed it to
fill_plane_buffer_attributes to clarify the actual intent of the
function now that it's handling most buffer related attributes.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Maintain z-ordering when creating planes
Nicholas Kazlauskas [Mon, 25 Mar 2019 16:17:14 +0000 (12:17 -0400)]
drm/amd/display: Maintain z-ordering when creating planes

[Why]
The overlay will be incorrectly placed *below* the primary plane for
commits with state->allow_modeset = true because the primary plane
won't be removed and recreated in the same commit.

[How]
Add the should_reset_plane helper to determine if the plane should be
reset or not. If we need to add or force reset any plane in the context
then we'll need to do the same for every plane on the stream.

Unfortunately we need to do the remove / recreate routine for removing
planes as well since DC currently isn't well equipped to handle the
plane with the top pipe being removed with other planes still active.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Update plane scaling parameters for fast updates
Nicholas Kazlauskas [Mon, 25 Mar 2019 16:06:23 +0000 (12:06 -0400)]
drm/amd/display: Update plane scaling parameters for fast updates

[Why]
Plane scaling parameters are not correctly filled or updated when
performing fast updates.

They're filled when creating the dc plane state and during atomic check.

While the atomic check code path happens for the plane even during fast
updates, the issue is that they're done in place on the dc_plane_state
directly. This dc_plane_state may be the current state plane state
being used by the hardware, so these parameters won't be correctly
programmed.

The new scaling parameters should instead be passed as an update
to the plane.

[How]
Update fill_rects_from_plane_state to not modify dc_plane_state
directly. Update the call sites that use this to fill in the appropriate
values.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: 3.2.26
Aric Cyr [Fri, 29 Mar 2019 20:27:50 +0000 (16:27 -0400)]
drm/amd/display: 3.2.26

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/display: Read eDP link settings on detection
Anthony Koo [Tue, 26 Mar 2019 00:33:35 +0000 (20:33 -0400)]
drm/amd/display: Read eDP link settings on detection

[Why]
Unlike external DP panels, internal eDP does not perform
verify link caps because the panel connection is fixed.

So if GOP enabled the eDP at boot, we can retain its
trained link settings to optimize.

[How]
Read the lane count and link rate by reading this
information from DPCD 100h, 101h, 115h

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>