kernel: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

brd: modify ramdisk device to be able to manage partitions

This patch adds partition management for Block RAM Device (BRD).

This patch is done to keep in sync BRD and loop device drivers.

This patch adds a parameter to the module, max_part, to specify
the maximum number of partitions per RAM device.

Example:

# modprobe brd max_part=63
# ls -l /dev/ram*
brw-rw---- 1 root disk 1,   0 2008-04-03 13:39 /dev/ram0
brw-rw---- 1 root disk 1,  64 2008-04-03 13:39 /dev/ram1
brw-rw---- 1 root disk 1, 640 2008-04-03 13:39 /dev/ram10
brw-rw---- 1 root disk 1, 704 2008-04-03 13:39 /dev/ram11
brw-rw---- 1 root disk 1, 768 2008-04-03 13:39 /dev/ram12
brw-rw---- 1 root disk 1, 832 2008-04-03 13:39 /dev/ram13
brw-rw---- 1 root disk 1, 896 2008-04-03 13:39 /dev/ram14
brw-rw---- 1 root disk 1, 960 2008-04-03 13:39 /dev/ram15
brw-rw---- 1 root disk 1, 128 2008-04-03 13:39 /dev/ram2
brw-rw---- 1 root disk 1, 192 2008-04-03 13:39 /dev/ram3
brw-rw---- 1 root disk 1, 256 2008-04-03 13:39 /dev/ram4
brw-rw---- 1 root disk 1, 320 2008-04-03 13:39 /dev/ram5
brw-rw---- 1 root disk 1, 384 2008-04-03 13:39 /dev/ram6
brw-rw---- 1 root disk 1, 448 2008-04-03 13:39 /dev/ram7
brw-rw---- 1 root disk 1, 512 2008-04-03 13:39 /dev/ram8
brw-rw---- 1 root disk 1, 576 2008-04-03 13:39 /dev/ram9
# fdisk /dev/ram0
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): o
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-2, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-2, default 2): 2

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
# ls -l /dev/ram0*
brw-rw---- 1 root disk 1, 0 2008-04-03 13:40 /dev/ram0
brw-rw---- 1 root disk 1, 1 2008-04-03 13:40 /dev/ram0p1
# mkfs /dev/ram0p1
mke2fs 1.40-WIP (14-Nov-2006)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
4016 inodes, 16032 blocks
801 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=16515072
2 block groups
8192 blocks per group, 8192 fragments per group
2008 inodes per group
Superblock backups stored on blocks:
8193

Writing inode tables: done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 26 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
# mount /dev/ram0p1 /mnt
df /mnt
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/ram0p1              15521       138     14582   1% /mnt
# ls -l /mnt
total 12
drwx------ 2 root root 12288 2008-04-03 13:41 lost+found
# umount /mnt
# rmmod brd

Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

add hrtimer specific debugobjects code

hrtimers have now dynamic users in the network code.  Put them under
debugobjects surveillance as well.

Add calls to the generic object debugging infrastructure and provide fixup
functions which allow to keep the system alive when recoverable problems have
been detected by the object debugging core code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

debugobjects: add timer specific object debugging code

Add calls to the generic object debugging infrastructure and provide fixup
functions which allow to keep the system alive when recoverable problems have
been detected by the object debugging core code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

debugobjects: add documentation

Add a DocBook for debugobjects.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

infrastructure to debug (dynamic) objects

We can see an ever repeating problem pattern with objects of any kind in the
kernel:

1) freeing of active objects
2) reinitialization of active objects

Both problems can be hard to debug because the crash happens at a point where
we have no chance to decode the root cause anymore.  One problem spot are
kernel timers, where the detection of the problem often happens in interrupt
context and usually causes the machine to panic.

While working on a timer related bug report I had to hack specialized code
into the timer subsystem to get a reasonable hint for the root cause.  This
debug hack was fine for temporary use, but far from a mergeable solution due
to the intrusiveness into the timer code.

The code further lacked the ability to detect and report the root cause
instantly and keep the system operational.

Keeping the system operational is important to get hold of the debug
information without special debugging aids like serial consoles and special
knowledge of the bug reporter.

The problems described above are not restricted to timers, but timers tend to
expose it usually in a full system crash.  Other objects are less explosive,
but the symptoms caused by such mistakes can be even harder to debug.

Instead of creating specialized debugging code for the timer subsystem a
generic infrastructure is created which allows developers to verify their code
and provides an easy to enable debug facility for users in case of trouble.

The debugobjects core code keeps track of operations on static and dynamic
objects by inserting them into a hashed list and sanity checking them on
object operations and provides additional checks whenever kernel memory is
freed.

The tracked object operations are:
- initializing an object
- adding an object to a subsystem list
- deleting an object from a subsystem list

Each operation is sanity checked before the operation is executed and the
subsystem specific code can provide a fixup function which allows to prevent
the damage of the operation.  When the sanity check triggers a warning message
and a stack trace is printed.

The list of operations can be extended if the need arises.  For now it's
limited to the requirements of the first user (timers).

The core code enqueues the objects into hash buckets.  The hash index is
generated from the address of the object to simplify the lookup for the check
on kfree/vfree.  Each bucket has it's own spinlock to avoid contention on a
global lock.

The debug code can be compiled in without being active.  The runtime overhead
is minimal and could be optimized by asm alternatives.  A kernel command line
option enables the debugging code.

Thanks to Ingo Molnar for review, suggestions and cleanup patches.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: add a flag to prevent debug_free checks on a kmem_cache

This is a preperatory patch for the debugobjects infrastructure.  The flag
prevents debug_free checks on kmem_caches.  This is necessary to avoid
resursive calls into a debug mechanism which uses a kmem_cache itself.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add macros similar to min/max/min_t/max_t

Also, change the variable names used in the min/max macros to avoid shadowed
variable warnings when min/max min_t/max_t are nested.

Small formatting changes to make all the macros have a similar form.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix v4l build]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alloc_uid: cleanup

Use kmem_cache_zalloc(), remove large amounts of initialisation code and
ifdeffery.

Note: this assumes that memset(*atomic_t, 0) correctly initialises the
atomic_t.  This is true for all present archtiectures and if it becomes false
for a future architecture then we'll need to make large changes all over the
place anyway.

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: fix warning with 64k PAGE_SIZE

fs/hfsplus/btree.c: In function 'hfsplus_bmap_alloc':
fs/hfsplus/btree.c:239: warning: comparison is always false due to limited range of data type

But this might hide a real bug?

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfs: fix warning with 64k PAGE_SIZE

fs/hfs/btree.c: In function 'hfs_bmap_alloc':
fs/hfs/btree.c:263: warning: comparison is always false due to limited range of data type

The patch makes the warning go away, but the code might actually be buggy?

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: don't read beyond string arguments' terminating zero

Fix update_console_cmdline() not to to read beyond the terminating zero of its
name argument.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Basic braille screen reader support

This adds a minimalistic braille screen reader support.  This is meant to
be used by blind people e.g.  on boot failures or when / cannot be mounted
etc and thus the userland screen readers can not work.

[akpm@linux-foundation.org: fix exports]
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jiri Kosina <jikos@jikos.cz>
Cc: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-*/futex.h should include linux/uaccess.h

Lots of asm-*/futex.h call pagefault_enable and pagefault_disable, which
are declared in linux/uaccess.h, without including linux/uaccess.h.

They all include asm/uaccess.h, so this patch replaces asm/uaccess.h
with linux/uaccess.h.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysv: [bl]e*_add_cpu conversion

replace all:
big/little_endian_variable = cpu_to_[bl]eX([bl]eX_to_cpu(big/little_endian_variable) +
expression_in_cpu_byteorder);
with:
[bl]eX_add_cpu(&big/little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

quota: le*_add_cpu conversion

replace all:
little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) +
expression_in_cpu_byteorder);
with:
leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfs/hfsplus: be*_add_cpu conversion

replace all:
big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) +
expression_in_cpu_byteorder);
with:
beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

affs: be*_add_cpu conversion

replace all:
big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) +
expression_in_cpu_byteorder);
with:
beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reiserfs: use open_bdev_excl

Use the proper helper to open a blockdevice by name for filesystem use,
this makes sure it's properly claimed (also added for open-by-number) and
gets rid of the struct file abuse.

Tested by mounting a reiserfs filesystem with external journal.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Acked-by: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: fix sparse warnings

fs/fuse/dev.c:306:2: warning: context imbalance in 'wait_answer_interruptible' - unexpected unlock
fs/fuse/dev.c:361:2: warning: context imbalance in 'request_wait_answer' - unexpected unlock
fs/fuse/dev.c:1002:4: warning: context imbalance in 'end_io_requests' - unexpected unlock

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: fix race in llseek

Fuse doesn't use i_mutex to protect setting i_size, and so
generic_file_llseek() can be racy: it doesn't use i_size_read().

So do a fuse specific llseek method, which does use i_size_read().

[akpm@linux-foundation.org: make `retval' loff_t]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: fix node ID type

Node ID is 64bit but it is passed as unsigned long to some functions.  This
breakage wasn't noticed, because libfuse uses unsigned long too.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: fix max i/o size calculation

Fix a bug that Werner Baumann reported: fuse can send a bigger write request
than the maximum specified.  This only affected direct_io operation.

In addition set a sane minimum for the max_read and max_write tunables, so I/O
always makes some progress.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: update file size on short read

If the READ request returned a short count, then either

  - cached size is incorrect
  - filesystem is buggy, as short reads are only allowed on EOF

So assume that the size is wrong and refresh it, so that cached read() doesn't
zero fill the missing chunk.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: implement perform_write

Introduce fuse_perform_write.  With fusexmp (a passthrough filesystem), large
(1MB) writes into a backing tmpfs filesystem are sped up by almost 4 times
(256MB/s vs 71MB/s).

[mszeredi@suse.cz]:

 - split into smaller functions
 - testing
 - duplicate generic_file_aio_write(), so that there's no need to add a
   new ->perform_write() a_op.  Comment from hch.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: clean up setting i_size in write

Extract common code for setting i_size in write functions into a common
helper.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: support writable mmap

Quoting Linus (3 years ago, FUSE inclusion discussions):

  "User-space filesystems are hard to get right. I'd claim that they
   are almost impossible, unless you limit them somehow (shared
   writable mappings are the nastiest part - if you don't have those,
   you can reasonably limit your problems by limiting the number of
   dirty pages you accept through normal "write()" calls)."

Instead of attempting the impossible, I've just waited for the dirty page
accounting infrastructure to materialize (thanks to Peter Zijlstra and
others).  This nicely solved the biggest problem: limiting the number of pages
used for write caching.

Some small details remained, however, which this largish patch attempts to
address.  It provides a page writeback implementation for fuse, which is
completely safe against VM related deadlocks.  Performance may not be very
good for certain usage patterns, but generally it should be acceptable.

It has been tested extensively with fsx-linux and bash-shared-mapping.

Fuse page writeback design
--------------------------

fuse_writepage() allocates a new temporary page with GFP_NOFS|__GFP_HIGHMEM.
It copies the contents of the original page, and queues a WRITE request to the
userspace filesystem using this temp page.

The writeback is finished instantly from the MM's point of view: the page is
removed from the radix trees, and the PageDirty and PageWriteback flags are
cleared.

For the duration of the actual write, the NR_WRITEBACK_TEMP counter is
incremented.  The per-bdi writeback count is not decremented until the actual
write completes.

On dirtying the page, fuse waits for a previous write to finish before
proceeding.  This makes sure, there can only be one temporary page used at a
time for one cached page.

This approach is wasteful in both memory and CPU bandwidth, so why is this
complication needed?

The basic problem is that there can be no guarantee about the time in which
the userspace filesystem will complete a write.  It may be buggy or even
malicious, and fail to complete WRITE requests.  We don't want unrelated parts
of the system to grind to a halt in such cases.

Also a filesystem may need additional resources (particularly memory) to
complete a WRITE request.  There's a great danger of a deadlock if that
allocation may wait for the writepage to finish.

Currently there are several cases where the kernel can block on page
writeback:

  - allocation order is larger than PAGE_ALLOC_COSTLY_ORDER
  - page migration
  - throttle_vm_writeout (through NR_WRITEBACK)
  - sync(2)

Of course in some cases (fsync, msync) we explicitly want to allow blocking.
So for these cases new code has to be added to fuse, since the VM is not
tracking writeback pages for us any more.

As an extra safetly measure, the maximum dirty ratio allocated to a single
fuse filesystem is set to 1% by default.  This way one (or several) buggy or
malicious fuse filesystems cannot slow down the rest of the system by hogging
dirty memory.

With appropriate privileges, this limit can be raised through
'/sys/class/bdi/<bdi>/max_ratio'.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: document missing fields for /proc/meminfo

A few fields in /proc/meminfo were not documented.  Fix.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: Add NR_WRITEBACK_TEMP counter

Fuse will use temporary buffers to write back dirty data from memory mappings
(normal writes are done synchronously).  This is needed, because there cannot
be any guarantee about the time in which a write will complete.

By using temporary buffers, from the MM's point if view the page is written
back immediately.  If the writeout was due to memory pressure, this
effectively migrates data from a full zone to a less full zone.

This patch adds a new counter (NR_WRITEBACK_TEMP) for the number of pages used
as temporary buffers.

[Lee.Schermerhorn@hp.com: add vmstat_text for NR_WRITEBACK_TEMP]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bdi: export bdi_writeout_inc()

Fuse needs this for writable mmap support.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bdi: add separate writeback accounting capability

Add a new BDI capability flag: BDI_CAP_NO_ACCT_WB.  If this flag is
set, then don't update the per-bdi writeback stats from
test_set_page_writeback() and test_clear_page_writeback().

Misc cleanups:

 - convert bdi_cap_writeback_dirty() and friends to static inline functions
 - create a flag that includes all three dirty/writeback related flags,
   since almst all users will want to have them toghether

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bdi: move statistics to debugfs

Move BDI statistics to debugfs:

   /sys/kernel/debug/bdi/<bdi>/stats

Use postcore_initcall() to initialize the sysfs class and debugfs,
because debugfs is initialized in core_initcall().

Update descriptions in ABI documentation.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bdi: allow setting a maximum for the bdi dirty limit

Add "max_ratio" to /sys/class/bdi.  This indicates the maximum percentage of
the global dirty threshold allocated to this bdi.

[mszeredi@suse.cz]

 - fix parsing in max_ratio_store().
 - export bdi_set_max_ratio() to modules
 - limit bdi_dirty with bdi->max_ratio
 - document new sysfs attribute

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bdi: allow setting a minimum for the bdi dirty limit

Under normal circumstances each device is given a part of the total write-back
cache that relates to its current avg writeout speed in relation to the other
devices.

min_ratio - allows one to assign a minimum portion of the write-back cache to
a particular device.  This is useful in situations where you might want to
provide a minimum QoS.  (One request for this feature came from flash based
storage people who wanted to avoid writing out at all costs - they of course
needed some pdflush hacks as well)

max_ratio - allows one to assign a maximum portion of the dirty limit to a
particular device.  This is useful in situations where you want to avoid one
device taking all or most of the write-back cache.  Eg.  an NFS mount that is
prone to get stuck, or a FUSE mount which you don't trust to play fair.

Add "min_ratio" to /sys/class/bdi.  This indicates the minimum percentage of
the global dirty threshold allocated to this bdi.

[mszeredi@suse.cz]

 - fix parsing in min_ratio_store()
 - document new sysfs attribute

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bdi: expose the BDI object in sysfs for FUSE

Register FUSE's backing_dev_info under sysfs with the name "fuse-MAJOR:MINOR"

Make the fuse control filesystem use s_dev instead of a fuse specific ID.
This makes it easier to match directories under /sys/fs/fuse/connections/ with
directories under /sys/class/bdi, and with actual mounts.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bdi: expose the BDI object in sysfs for NFS

Register NFS' backing_dev_info under sysfs with the name "nfs-MAJOR:MINOR"

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bdi: export BDI attributes in sysfs

Provide a place in sysfs (/sys/class/bdi) for the backing_dev_info object.
This allows us to see and set the various BDI specific variables.

In particular this properly exposes the read-ahead window for all relevant
users and /sys/block/<block>/queue/read_ahead_kb should be deprecated.

With patient help from Kay Sievers and Greg KH

[mszeredi@suse.cz]

 - split off NFS and FUSE changes into separate patches
 - document new sysfs attributes under Documentation/ABI
 - do bdi_class_init as a core_initcall, otherwise the "default" BDI
   won't be initialized
 - remove bdi_init_fmt macro, it's not used very much

[akpm@linux-foundation.org: fix ia64 warning]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Greg KH <greg@kroah.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pidns: make pid->level and pid_ns->level unsigned

These values represent the nesting level of a namespace and pids living in it,
and it's always non-negative.

Turning this from int to unsigned int saves some space in pid.c (11 bytes on
x86 and 64 on ia64) by letting the compiler optimize the pid_nr_ns a bit.
E.g.  on ia64 this removes the sign extension calls, which compiler adds to
optimize access to pid->nubers[ns->level].

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

make marker_debug static

With the needlessly global marker_debug being static gcc can optimize the
unused code away.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mxser: convert large macros to functions

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pids: sys_getpgid: fix unsafe *pid usage, s/tasklist/rcu/

1. sys_getpgid() needs rcu_read_lock() to derive the pgrp _nr, even if
   the task is current, otherwise we can race with another thread which
   does sys_setpgid().

2. Use rcu_read_lock() instead of tasklist_lock when pid != 0, make sure
   that we don't use the NULL pid if the task exits right after successful
   find_task_by_vpid().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pids: sys_getsid: fix unsafe *pid usage, fix possible 0 instead of -ESRCH

1. sys_getsid() needs rcu_read_lock() to derive the session _nr, even if
   the task is current, otherwise we can race with another thread which
   does sys_setsid().

2. The task can exit between find_task_by_vpid() and task_session_vnr(),
   in that unlikely case sys_getsid() returns 0 instead of -ESRCH.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pids: __set_special_pids: use change_pid() helper

Use change_pid() instead of detach_pid() + attach_pid() in
__set_special_pids().

This way task_session() is not NULL in between.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pids: sys_setpgid: use change_pid() helper

Use change_pid() instead of detach_pid() + attach_pid() in sys_setpgid().

This way task_pgrp() is not NULL in between.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pids: introduce change_pid() helper

Based on Eric W. Biederman's idea.

Without tasklist_lock held task_session()/task_pgrp() can return NULL if the
caller races with setprgp()/setsid() which does detach_pid() + attach_pid().
This can happen even if task == current.

Intoduce the new helper, change_pid(), which should be used instead.  This way
the caller always sees the special pid != NULL, either old or new.

Also change the prototype of attach_pid(), it always returns 0 and nobody
check the returned value.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pids: de_thread: don't clear session/pgrp pids for the old leader

Based on Eric W. Biederman's idea.

Unless task == current, without tasklist_lock held task_session()/task_pgrp()
can return NULL if the caller races with de_thread() which switches the group
leader.

Change transfer_pid() to not clear old->pids[type].pid for the old leader.
This means that its .pid can point to "nowhere", but this is already true for
sub-threads, and the old leader is not group_leader() any longer.  IOW, with
or without this change we can't trust task's special pids unless it is the
group leader.

With this change the following code

rcu_read_lock();
task = find_task_by_xxx();
do_something(task_pgrp(task), task_session(task));
rcu_read_unlock();

can't race with exec and hit the NULL pid.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Deprecate find_task_by_pid()

There are some places that are known to operate on tasks'
global pids only:

* the rest_init() call (called on boot)
* the kgdb's getthread
* the create_kthread() (since the kthread is run in init ns)

So use the find_task_by_pid_ns(..., &init_pid_ns) there
and schedule the find_task_by_pid for removal.

[sukadev@us.ibm.com: Fix warning in kernel/pid.c]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use find_task_by_vpid in taskstats

The pid to lookup a task by is passed inside taskstats code via genetlink
message.

Since netlink packets are now processed in the context of the sending task,
this is correct to lookup the task with find_task_by_vpid() here.

Besides, I fix the call to fill_pid() from taskstats_exit(), since the
tsk->pid is not required in fill_pid() in this case, and the pid field on
task_struct is going to be deprecated as well.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Jonathan Lim <jlim@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_pidmap: turn it into free_pidmap(struct upid *)

The callers of free_pidmap() pass 2 members of "struct upid", we can just
pass "struct upid *" instead.  Shaves off 10 bytes from pid.o.

Also, simplify the alloc_pid's "out_free:" error path a little bit.  This
way it looks more clear which subset of pid->numbers[] we are freeing.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc :Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

devpts: factor out PTY index allocation

Factor out the code used to allocate/free a pts index into new interfaces,
devpts_new_index() and devpts_kill_index().  This localizes the external data
structures used in managing the pts indices.

[akpm@linux-foundation.org: undo accidental mutex2sem conversion]
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

devpts: propagate error code from devpts_pty_new

Have ptmx_open() propagate any error code returned by devpts_pty_new()
(which returns either 0 or -ENOMEM anyway).

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: fix routine name in ptmx_open()

At ptmx_open(), the 2nd parameter for check_tty_count() should
be "ptmx_open".

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char serial: switch drivers to ioremap_nocache

Simple search/replace except for synclink.c where I noticed a real bug and
fixed it too.  It was doing NULL + offset, then checking for NULL if the remap
failed.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ip2: switch remaining direct call of ops->flush_buffer

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: add throttle/unthrottle helpers

Something Arjan suggested which allows us to clean up the code nicely

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isicom: fix buffer allocation

Fix the rather strange buffer management on open that turned up while auditing
for BKL dependencies.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

esp: clean up to modern coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epca: coding style

Clean up the epca driver

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

riscom8: coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

strip: Fix up strip for the new order

- Use the tty baud functions
- Call driver termios methods directly holding the right locking
- Check for a write method

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: The big operations rework

- Operations are now a shared const function block as with most other Linux
  objects

- Introduce wrappers for some optional functions to get consistent behaviour

- Wrap put_char which used to be patched by the tty layer

- Document which functions are needed/optional

- Make put_char report success/fail

- Cache the driver->ops pointer in the tty as tty->ops

- Remove various surplus lock calls we no longer need

- Remove proc_write method as noted by Alexey Dobriyan

- Introduce some missing sanity checks where certain driver/ldisc
  combinations would oops as they didn't check needed methods were present

[akpm@linux-foundation.org: fix fs/compat_ioctl.c build]
[akpm@linux-foundation.org: fix isicom]
[akpm@linux-foundation.org: fix arch/ia64/hp/sim/simserial.c build]
[akpm@linux-foundation.org: fix kgdb]
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isicom: bring into coding style

[akpm@linux-foundation.org: fix arm, cleanups]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: switch the serial core to int put_char methods

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pc300: Update to tty_set_operations

This driver somehow escaped the tty operations changes way back when.  Update
it so that we can switch to tty->ops shortly.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pty: prepare for tty->ops changes

We are about to change the tty layer to avoid keeping private copies of all
the methods in each tty.  We have to update the pty layer first as it
currently patches the ioctl method according to the tty type.  Use multiple
tty operations sets instead.

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isdn: switch to int put_char method

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

consoles: switch to int put_char method

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kelly Daly <kelly@au.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

synclink series: switch to int put_char method

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

specialix: Switch to int put_char method

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial167: switch to int put_char method

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

riscom/rocket: switch to int put_char method

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pcmcia: serial to int put_char method

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mxser: switch to put_char being int

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char: switch gs, cyclades and esp to return int for put_char

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amiserial: Switch put char to return success/fail

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

usb gadget: switch to put_char returning int

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial m68k: put_char returns

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390 tty: Prepare for put_char to return success/fail

Put the changes into the drivers first.  This will still compile/work but
produce a warning if bisected so can still be debugged

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty/serial: lay the foundations for the next set of reworks

- Stop drivers calling their own flush method indirectly, it obfuscates code
  and it will change soon anyway

- A few more lock_kernel paths temporarily needed in some driver internal
  waiting code

- Remove private put_char method that does a write call for one char - we
  have that anyway

- Most but not yet all of the termios copy under lock fixing (some has other
  dependencies to follow)

- Note a few locking bugs in drivers found in the process

- Kill remaining [ab]users of TIOCG/SSOFTCAR in the driver, these must go to
  fix the termios locking

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/ds1286.c: use time_before, time_before_eq, etc

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

#include <linux/jiffies.h>

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: rio, fix cirrus defines

Rename defines to be in RIO* namespace to not to collide with other defines in
tree.  This broke (as akpm correctly pointed out) some allmodconfig builds,
e.g.  on ppc:

In file included from drivers/char/rio/rio_linux.c:81:
drivers/char/rio/cirrus.h:202:1: warning: "COMPLETE" redefined
In file included from include/net/netns/ipv4.h:8,
                 from include/net/net_namespace.h:13,
                 from include/linux/seq_file.h:7,
                 from include/asm/machdep.h:12,
                 from include/asm/pci.h:17,
                 from include/linux/pci.h:951,
                 from drivers/char/rio/rio_linux.c:50:
include/net/inet_frag.h:28:1: warning: this is the location of the previous definition

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cyclades: use ioremap_nocache for clarity as proposed

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cyclades: coding style & review

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

istallion: TIOCG/SSOFTCAR handling removal

This is handled (and correctly) by the core code so does not belong
incorrectly in the driver.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: ip2, macros cleanup

- remove i2os.h -- there was only macro to macro renaming or useless
  stuff
- remove another uselless stuf (NULLFUNC, NULLPTR, YES, NO)
- use outb/inb directly
- use locking functions directly
- don't define another ROUNDUP, use roundup(x, 2) instead
- some comments and whitespace cleanup
- remove some commented crap
- prepend the rest by I2 prefix to not collide with rest of the world
  like in following output (pointed out by akpm)

In file included from drivers/char/ip2/ip2main.c:128:
drivers/char/ip2/i2ellis.h:608:1: warning: "COMPLETE" redefined
In file included from include/net/netns/ipv4.h:8,
                 from include/net/net_namespace.h:13,
                 from include/linux/seq_file.h:7,
                 from include/asm/machdep.h:12,
                 from include/asm/pci.h:17,
                 from include/linux/pci.h:951,
                 from drivers/char/ip2/ip2main.c:95:
include/net/inet_frag.h:28:1: warning: this is the location of the previous definition

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/ip2/ip2main.c: replace init_module&cleanup_module with module_init&module_exit

Replace init_module and cleanup_module with static functions and
module_init/module_exit.

Signed-off-by: Jon Schindler <jkschind@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epca.c: static functions and integer as NULL pointer fixes

drivers/char/epca.c:926:28: warning: Using plain integer as NULL pointer
drivers/char/epca.c:1841:2: warning: Using plain integer as NULL pointer

Forward declarations were already marked static, mark the definitions too.
drivers/char/epca.c:2493:6: warning: symbol 'digi_send_break' was not declared. Should it be static?
drivers/char/epca.c:2881:12: warning: symbol 'init_PCI' was not declared. Should it be static?

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cyclades.c: fix sparse shadowed variable warnings

Nested min() macros.
drivers/char/cyclades.c:2750:7: warning: symbol '_x' shadows an earlier one
drivers/char/cyclades.c:2750:7: originally declared here
drivers/char/cyclades.c:2750:7: warning: symbol '_x' shadows an earlier one
drivers/char/cyclades.c:2750:7: originally declared here
drivers/char/cyclades.c:2750:7: warning: symbol '_y' shadows an earlier one
drivers/char/cyclades.c:2750:7: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char: rocket.c: fix sparse variable shadowing and int as NULL pointer

Nested min() macros shadow _x, separate into two lines.
drivers/char/rocket.c:451:7: warning: symbol '_x' shadows an earlier one
drivers/char/rocket.c:451:7: originally declared here
drivers/char/rocket.c:451:7: warning: symbol '_x' shadows an earlier one
drivers/char/rocket.c:451:7: originally declared here
drivers/char/rocket.c:451:7: warning: symbol '_y' shadows an earlier one
drivers/char/rocket.c:451:7: originally declared here
drivers/char/rocket.c:1754:7: warning: symbol '_x' shadows an earlier one
drivers/char/rocket.c:1754:7: originally declared here
drivers/char/rocket.c:1754:7: warning: symbol '_x' shadows an earlier one
drivers/char/rocket.c:1754:7: originally declared here
drivers/char/rocket.c:1754:7: warning: symbol '_y' shadows an earlier one
drivers/char/rocket.c:1754:7: originally declared here
drivers/char/rocket.c:1751:20: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char: esp.c: fix possible double-unlock

Hitting either of the break statements in the while loop would cause a
double-unlock of info->lock.

[Jiri Slaby suggested simply returning is safe here, rather than a goto]

Noticed by sparse:
drivers/char/esp.c:2042:2: warning: context imbalance in 'rs_wait_until_sent' - unexpected unlock

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char: fix sparse shadowed variable warnings in esp.c

flags only use was in spin_lock_irqsave/spin_lock_irgrestore pairs, no
need to redeclare for each one.

drivers/char/esp.c:1599:17: warning: symbol 'flags' shadows an earlier one
drivers/char/esp.c:1517:16: originally declared here
drivers/char/esp.c:1615:17: warning: symbol 'flags' shadows an earlier one
drivers/char/esp.c:1517:16: originally declared here
drivers/char/esp.c:1631:17: warning: symbol 'flags' shadows an earlier one
drivers/char/esp.c:1517:16: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: moxa, add firmware loading fix

Be more verbose on fw load fail as noted by Oyvind.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Oyvind Aabling <Oyvind.Aabling@uni-c.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: moxa, update credits

- update version
- update maintainers
- copyright the stuff

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: moxa, notify about board readiness

Drop a message to dmesg about card being ready.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: moxa, introduce MOXA_IS_320 macro

It allows to simplify the code, especially MoxaPortSetBaud.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: moxa, remove useless tty functions

- moxa_flush_chars -- no code; ldics handle this well
- moxa_put_char -- only wrapper to moxa_write (same code), tty does this
  the same way if tty->driver->put_char is NULL

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: moxa, little cleanup

Cleanup of
- whitespace
- macros
- useless casts
- return (sth); -> return sth;
- types
- superfluous parenthesis and braces
- init tmp directly in moxa_get_serial_info
- commented defunct code
- commented prototypes
- MOXA/moxa printk case

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: moxa, rework open/close

- add locking to open/close/hangup and ioctl (tiocm)
- add pci hot-un-plug support (hangup on board remove, wait for openers)
- cleanup block_till_ready
- move close code common to close/hangup into separate function to be
  able to call it from open when hangup occurs while block_till_ready
- let ldisc flush on tty layer, it will do it after we return

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>