git.openwrt.org Git - openwrt/staging/blogic.git/log

tun: napi flags belong to tfile

Since tun->flags might be shared by multiple tfile structures,
it is better to make sure tun_get_user() is using the flags
for the current tfile.

Presence of the READ_ONCE() in tun_napi_frags_enabled() gave a hint
of what could happen, but we need something stronger to please
syzbot.

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 13647 Comm: syz-executor5 Not tainted 4.19.0-rc5+ #59
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427
Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4
RSP: 0018:ffff8801c400f410 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325
RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0
RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000
R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358
R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004
FS:  00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
napi_gro_frags+0x3f4/0xc90 net/core/dev.c:5715
tun_get_user+0x31d5/0x42a0 drivers/net/tun.c:1922
tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1967
call_write_iter include/linux/fs.h:1808 [inline]
new_sync_write fs/read_write.c:474 [inline]
__vfs_write+0x6b8/0x9f0 fs/read_write.c:487
vfs_write+0x1fc/0x560 fs/read_write.c:549
ksys_write+0x101/0x260 fs/read_write.c:598
__do_sys_write fs/read_write.c:610 [inline]
__se_sys_write fs/read_write.c:607 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:607
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457579
Code: 1d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe003614c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457579
RDX: 0000000000000012 RSI: 0000000020000000 RDI: 000000000000000a
RBP: 000000000072c040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0036156d4
R13: 00000000004c5574 R14: 00000000004d8e98 R15: 00000000ffffffff
Modules linked in:

RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427
Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4
RSP: 0018:ffff8801c400f410 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325
RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0
RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000
R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358
R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004
FS:  00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tun: initialize napi_mutex unconditionally

This is the first part to fix following syzbot report :

console output: https://syzkaller.appspot.com/x/log.txt?x=145378e6400000
kernel config: https://syzkaller.appspot.com/x/.config?x=443816db871edd66
link: https://syzkaller.appspot.com/bug?extid=e662df0ac1d753b57e80
Following patch is fixing the race condition, but it seems safer
to initialize this mutex at tfile creation anyway.

Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+e662df0ac1d753b57e80@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>

tun: remove unused parameters

tun_napi_disable() and tun_napi_del() do not need
a pointer to the tun_struct

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bond: take rcu lock in netpoll_send_skb_on_dev

The bonding driver lacks the rcu lock when it calls down into
netdev_lower_get_next_private_rcu from bond_poll_controller, which
results in a trace like:

WARNING: CPU: 2 PID: 179 at net/core/dev.c:6567 netdev_lower_get_next_private_rcu+0x34/0x40
CPU: 2 PID: 179 Comm: kworker/u16:15 Not tainted 4.19.0-rc5-backup+ #1
Workqueue: bond0 bond_mii_monitor
RIP: 0010:netdev_lower_get_next_private_rcu+0x34/0x40
Code: 48 89 fb e8 fe 29 63 ff 85 c0 74 1e 48 8b 45 00 48 81 c3 c0 00 00 00 48 8b 00 48 39 d8 74 0f 48 89 45 00 48 8b 40 f8 5b 5d c3 <0f> 0b eb de 31 c0 eb f5 0f 1f 40 00 0f 1f 44 00 00 48 8>
RSP: 0018:ffffc9000087fa68 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff880429614560 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 00000000ffffffff RDI: ffffffffa184ada0
RBP: ffffc9000087fa80 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc9000087f9f0 R11: ffff880429798040 R12: ffff8804289d5980
R13: ffffffffa1511f60 R14: 00000000000000c8 R15: 00000000ffffffff
FS: 0000000000000000(0000) GS:ffff88042f880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4b78fce180 CR3: 000000018180f006 CR4: 00000000001606e0
Call Trace:
bond_poll_controller+0x52/0x170
netpoll_poll_dev+0x79/0x290
netpoll_send_skb_on_dev+0x158/0x2c0
netpoll_send_udp+0x2d5/0x430
write_ext_msg+0x1e0/0x210
console_unlock+0x3c4/0x630
vprintk_emit+0xfa/0x2f0
printk+0x52/0x6e
? __netdev_printk+0x12b/0x220
netdev_info+0x64/0x80
? bond_3ad_set_carrier+0xe9/0x180
bond_select_active_slave+0x1fc/0x310
bond_mii_monitor+0x709/0x9b0
process_one_work+0x221/0x5e0
worker_thread+0x4f/0x3b0
kthread+0x100/0x140
? process_one_work+0x5e0/0x5e0
? kthread_delayed_work_timer_fn+0x90/0x90
ret_from_fork+0x24/0x30

We're also doing rcu dereferences a layer up in netpoll_send_skb_on_dev
before we call down into netpoll_poll_dev, so just take the lock there.

Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnetlink: Fail dump if target netnsid is invalid

Link dumps can return results from a target namespace. If the namespace id
is invalid, then the dump request should fail if get_target_net fails
rather than continuing with a dump of the current namespace.

Fixes: 79e1ad148c844 ("rtnetlink: use netnsid to query interface")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "openvswitch: Fix template leak in error cases."

This reverts commit 90c7afc96cbbd77f44094b5b651261968e97de67.

When the commit was merged, the code used nf_ct_put() to free
the entry, but later on commit 76644232e612 ("openvswitch: Free
tmpl with tmpl_free.") replaced that with nf_ct_tmpl_free which
is a more appropriate. Now the original problem is removed.

Then 44d6e2f27328 ("net: Replace NF_CT_ASSERT() with WARN_ON().")
replaced a debug assert with a WARN_ON() which is trigged now.

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth

Johan Hedberg says:

====================
pull request: bluetooth 2018-09-27

Here's one more Bluetooth fix for 4.19, fixing the handling of an
attempt to unpair a device while pairing is in progress.

Let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: ignore STATE_MSG on wrong link session

The initial session number when a link is created is based on a random
value, taken from struct tipc_net->random. It is then incremented for
each link reset to avoid mixing protocol messages from different link
sessions.

However, when a bearer is reset all its links are deleted, and will
later be re-created using the same random value as the first time.
This means that if the link never went down between creation and
deletion we will still sometimes have two subsequent sessions with
the same session number. In virtual environments with potentially
long transmission times this has turned out to be a real problem.

We now fix this by randomizing the session number each time a link
is created.

With a session number size of 16 bits this gives a risk of session
collision of 1/64k. To reduce this further, we also introduce a sanity
check on the very first STATE message arriving at a link. If this has
an acknowledge value differing from 0, which is logically impossible,
we ignore the message. The final risk for session collision is hence
reduced to 1/4G, which should be sufficient.

Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: act_ipt: check for underflow in __tcf_ipt_init()

If "td->u.target_size" is larger than sizeof(struct xt_entry_target) we
return -EINVAL. But we don't check whether it's smaller than
sizeof(struct xt_entry_target) and that could lead to an out of bounds
read.

Fixes: 7ba699c604ab ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2018-10-01

1) Validate address prefix lengths in the xfrm selector,
   otherwise we may hit undefined behaviour in the
   address matching functions if the prefix is too
   big for the given address family.

2) Fix skb leak on local message size errors.
   From Thadeu Lima de Souza Cascardo.

3) We currently reset the transport header back to the network
   header after a transport mode transformation is applied. This
   leads to an incorrect transport header when multiple transport
   mode transformations are applied. Reset the transport header
   only after all transformations are already applied to fix this.
   From Sowmini Varadhan.

4) We only support one offloaded xfrm, so reset crypto_done after
   the first transformation in xfrm_input(). Otherwise we may call
   the wrong input method for subsequent transformations.
   From Sowmini Varadhan.

5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry.
   skb_dst_force does not really force a dst refcount anymore, it might
   clear it instead. xfrm code did not expect this, add a check to not
   dereference skb_dst() if it was cleared by skb_dst_force.

6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds
   read in xfrm_state_find. From Sean Tranchetti.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp/dccp: fix lockdep issue when SYN is backlogged

In normal SYN processing, packets are handled without listener
lock and in RCU protected ingress path.

But syzkaller is known to be able to trick us and SYN
packets might be processed in process context, after being
queued into socket backlog.

In commit 06f877d613be ("tcp/dccp: fix other lockdep splats
accessing ireq_opt") I made a very stupid fix, that happened
to work mostly because of the regular path being RCU protected.

Really the thing protecting ireq->ireq_opt is RCU read lock,
and the pseudo request refcnt is not relevant.

This patch extends what I did in commit 449809a66c1d ("tcp/dccp:
block BH for SYN processing") by adding an extra rcu_read_{lock|unlock}
pair in the paths that might be taken when processing SYN from
socket backlog (thus possibly in process context)

Fixes: 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree:

1) Skip ip_sabotage_in() for packet making into the VRF driver,
   otherwise packets are dropped, from David Ahern.

2) Clang compilation warning uncovering typo in the
   nft_validate_register_store() call from nft_osf, from Stefan Agner.

3) Double sizeof netlink message length calculations in ctnetlink,
   from zhong jiang.

4) Missing rb_erase() on batch full in rbtree garbage collector,
   from Taehee Yoo.

5) Calm down compilation warning in nf_hook(), from Florian Westphal.

6) Missing check for non-null sk in xt_socket before validating
   netns procedence, from Flavio Leitner.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: fix typo in nla_parse_nested() comment

Fix a simple typo: attribuets -> attributes

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: Disable clk during suspend / resume

Disable the clk during suspend to save power. Note that tp->clk may be
NULL, the clk core functions handle this without problems.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: fix Tx descriptor corruption on 82xx devices

In regular NIC transmission flow, driver always configures MAC using
Tx queue zero descriptor as a part of MAC learning flow.
But with multi Tx queue supported NIC, regular transmission can occur on
any non-zero Tx queue and from that context it uses
Tx queue zero descriptor to configure MAC, at the same time TX queue
zero could be used by another CPU for regular transmission
which could lead to Tx queue zero descriptor corruption and cause FW
abort.

This patch fixes this in such a way that driver always configures
learned MAC address from the same Tx queue which is used for
regular transmission.

Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix failover problem

We see the following scenario:
1) Link endpoint B on node 1 discovers that its peer endpoint is gone.
   Since there is a second working link, failover procedure is started.
2) Link endpoint A on node 1 sends a FAILOVER message to peer endpoint
   A on node 2. The node item 1->2 goes to state FAILINGOVER.
3) Linke endpoint A/2 receives the failover, and is supposed to take
   down its parallell link endpoint B/2, while producing a FAILOVER
   message to send back to A/1.
4) However, B/2 has already been deleted, so no FAILOVER message can
   created.
5) Node 1->2 remains in state FAILINGOVER forever, refusing to receive
   any messages that can bring B/1 up again. We are left with a non-
   redundant link between node 1 and 2.

We fix this with letting endpoint A/2 build a dummy FAILOVER message
to send to back to A/1, so that the situation can be resolved.

Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-usb-Check-for-Wake-on-LAN-modes'

Florian Fainelli says:

====================
net: usb: Check for Wake-on-LAN modes

Most of our USB Ethernet drivers don't seem to be checking properly
whether the user is supplying a correct Wake-on-LAN mode to enter, so
the experience as an user could be confusing, since it would generally
lead to either no wake-up, or the device not being marked for wake-up.

Please review!

Changes in v2:

- fixed lan78xx handling, thanks Woojung!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

smsc95xx: Check for Wake-on-LAN modes

The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

smsc75xx: Check for Wake-on-LAN modes

The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: 6c636503260d ("smsc75xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: Check for supported Wake-on-LAN Modes

The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: 21ff2e8976b1 ("r8152: support WOL")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sr9800: Check for supported Wake-on-LAN modes

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lan78xx: Check for supported Wake-on-LAN modes

The driver supports a fair amount of Wake-on-LAN modes, but is not
checking that the user specified one that is supported.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@Microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ax88179_178a: Check for supported Wake-on-LAN modes

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

asix: Check for supported Wake-on-LAN modes

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ieee802154-for-davem-2018-09-28' of git://git./linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2018-09-28

An update from ieee802154 for your *net* tree.

Some cleanup patches throughout the drivers from the Huawei tag team
Yue Haibing and Zhong Jiang.
Xue is replacing some magic numbers with defines in his mcr20a driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'rxrpc-fixes-20180928' of git://git./linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Fixes

Here are some miscellaneous fixes for AF_RXRPC:

(1) Remove a duplicate variable initialisation.

(2) Fix one of the checks made when we decide to set up a new incoming
     service call in which a flag is being checked in the wrong field of
     the packet header.  This check is abstracted out into helper
     functions.

(3) Fix RTT gathering.  The code has been trying to make use of socket
     timestamps, but wasn't actually enabling them.  The code has also been
     recording a transmit time for the outgoing packet for which we're
     going to measure the RTT after sending the message - but we can get
     the incoming packet before we get to that and record a negative RTT.

(4) Fix the emission of BUSY packets (we are emitting ABORTs instead).

(5) Improve error checking on incoming packets.

(6) Try to fix a bug in new service call handling whereby a BUG we should
     never be able to reach somehow got triggered.  Do this by moving much
     of the checking as early as possible and not repeating it later
     (depends on (5) above).

(7) Fix the sockopts set on a UDP6 socket to include the ones set on a
     UDP4 socket so that we receive UDP4 errors and packet-too-large
     notifications too.

(8) Fix the distribution of errors so that we do it at the point of
     receiving an error in the UDP callback rather than deferring it
     thereby cutting short any transmissions that would otherwise occur in
     the window.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'netpoll-second-round-of-fixes'

Eric Dumazet says:

====================
netpoll: second round of fixes.

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC).

This capture, showing one ksoftirqd eating all cycles
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

It seems that all networking drivers that do use NAPI
for their TX completions, should not provide a ndo_poll_controller() :

Most NAPI drivers have netpoll support already handled
in core networking stack, since netpoll_poll_dev()
uses poll_napi(dev) to iterate through registered
NAPI contexts for a device.

First patch is a fix in poll_one_napi().

Then following patches take care of ten drivers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

ibmvnic uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

ibmvnic_netpoll_controller() was completely wrong anyway,
as it was scheduling NAPI to service RX queues (instead of TX),
so I doubt netpoll ever worked on this driver.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc-falcon: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

sfc-falcon uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Acked-By: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

sfc uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Acked-By: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

ena uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Netanel Belgazal <netanel@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Zorik Machulsky <zorik@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlogic: netxen: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

netxen uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Rahul Verma <rahul.verma@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

qlcnic uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_net: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

virto_net uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

hns uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ehea: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

ehea uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hinic: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

hinic uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Note that hinic_netpoll() was incorrectly scheduling NAPI
on both RX and TX queues.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netpoll: do not test NAPI_STATE_SCHED in poll_one_napi()

Since we do no longer require NAPI drivers to provide
an ndo_poll_controller(), napi_schedule() has not been done
before poll_one_napi() invocation.

So testing NAPI_STATE_SCHED is likely to cause early returns.

While we are at it, remove outdated comment.

Note to future bisections : This change might surface prior
bugs in drivers. See commit 73f21c653f93 ("bnxt_en: Fix TX
timeout during netpoll.") for one occurrence.

Fixes: ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2018-09-27' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
More patches than I'd like perhaps, but each seems reasonable:
* two new spectre-v1 mitigations in nl80211
* TX status fix in general, and mesh in particular
* powersave vs. offchannel fix
* regulatory initialization fix
* fix for a queue hang due to a bad return value
* allocate TXQs for active monitor interfaces, fixing my
   earlier patch to avoid unnecessary allocations where I
   missed this case needed them
* fix TDLS data frames priority assignment
* fix scan results processing to take into account duplicate
   channel numbers (over different operating classes, but we
   don't necessarily know the operating class)
* various hwsim fixes for radio destruction and new radio
   announcement messages
* remove an extraneous kernel-doc line
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix shmem structure inconsistency between driver and the mfw.

The structure shared between driver and the management FW (mfw) differ in
sizes. This would lead to issues when driver try to access the structure
members which are not-aligned with the mfw copy e.g., data_ptr usage in the
case of mfw_tlv request.
Align the driver structure with mfw copy, add reserved field(s) to driver
structure for the members not used by the driver.

Fixes: dd006921d67f ("qed: Add MFW interfaces for TLV request support.)
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>

Update maintainers for bnx2/bnx2x/qlge/qlcnic drivers.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ameen Rahman <Ameen.Rahman@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: change bridge maintainers

I haven't been doing reviews only but not active development on bridge
code for several years. Roopa and Nikolay have been doing most of
the new features and have agreed to take over as new co-maintainers.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Merge branch 's390-qeth-fixes'

Julian Wiedmann says:

====================
s390/qeth: fixes 2019-09-26

please apply two qeth patches for -net. The first is a trivial cleanup
required for patch #2 by Jean, which fixes a potential endless loop.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

s390: qeth: Fix potential array overrun in cmd/rc lookup

Functions qeth_get_ipa_msg and qeth_get_ipa_cmd_name are modifying
the last member of global arrays without any locking that I can see.
If two instances of either function are running at the same time,
it could cause a race ultimately leading to an array overrun (the
contents of the last entry of the array is the only guarantee that
the loop will ever stop).

Performing the lookups without modifying the arrays is admittedly
slower (two comparisons per iteration instead of one) but these
are operations which are rare (should only be needed in error
cases or when debugging, not during successful operation) and it
seems still less costly than introducing a mutex to protect the
arrays in question.

As a side bonus, it allows us to declare both arrays as const data.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390: qeth_core_mpc: Use ARRAY_SIZE instead of reimplementing its function

Use the common code ARRAY_SIZE macro instead of a private implementation.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: xt_socket: check sk before checking for netns.

Only check for the network namespace if the socket is available.

Fixes: f564650106a6 ("netfilter: check if the socket netns is correct.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: avoid erronous array bounds warning

Unfortunately some versions of gcc emit following warning:
  $ make net/xfrm/xfrm_output.o
  linux/compiler.h:252:20: warning: array subscript is above array bounds [-Warray-bounds]
  hook_head = rcu_dereference(net->nf.hooks_arp[hook]);
                            ^~~~~~~~~~~~~~~~~~~~~
xfrm_output_resume passes skb_dst(skb)->ops->family as its 'pf' arg so compiler
can't know that we'll never access hooks_arp[].
(NFPROTO_IPV4 or NFPROTO_IPV6 are only possible cases).

Avoid this by adding an explicit WARN_ON_ONCE() check.

This patch has no effect if the family is a compile-time constant as gcc
will remove the switch() construct entirely.

Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_rbtree: add missing rb_erase() in GC routine

The nft_set_gc_batch_check() checks whether gc buffer is full.
If gc buffer is full, gc buffer is released by
the nft_set_gc_batch_complete() internally.
In case of rbtree, the rb_erase() should be called before calling the
nft_set_gc_batch_complete(). therefore the rb_erase() should
be called before calling the nft_set_gc_batch_check() too.

test commands:
   table ip filter {
   set set1 {
   type ipv4_addr; flags interval, timeout;
   gc-interval 10s;
   timeout 1s;
   elements = {
   1-2,
   3-4,
   5-6,
   ...
   10000-10001,
   }
   }
   }
   %nft -f test.nft

splat looks like:
[  430.273885] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  430.282158] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  430.283116] CPU: 1 PID: 190 Comm: kworker/1:2 Tainted: G    B             4.18.0+ #7
[  430.283116] Workqueue: events_power_efficient nft_rbtree_gc [nf_tables_set]
[  430.313559] RIP: 0010:rb_next+0x81/0x130
[  430.313559] Code: 08 49 bd 00 00 00 00 00 fc ff df 48 bb 00 00 00 00 00 fc ff df 48 85 c0 75 05 eb 58 48 89 d4
[  430.313559] RSP: 0018:ffff88010cdb7680 EFLAGS: 00010207
[  430.313559] RAX: 0000000000b84854 RBX: dffffc0000000000 RCX: ffffffff83f01973
[  430.313559] RDX: 000000000017090c RSI: 0000000000000008 RDI: 0000000000b84864
[  430.313559] RBP: ffff8801060d4588 R08: fffffbfff09bc349 R09: fffffbfff09bc349
[  430.313559] R10: 0000000000000001 R11: fffffbfff09bc348 R12: ffff880100f081a8
[  430.313559] R13: dffffc0000000000 R14: ffff880100ff8688 R15: dffffc0000000000
[  430.313559] FS:  0000000000000000(0000) GS:ffff88011b400000(0000) knlGS:0000000000000000
[  430.313559] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  430.313559] CR2: 0000000001551008 CR3: 000000005dc16000 CR4: 00000000001006e0
[  430.313559] Call Trace:
[  430.313559]  nft_rbtree_gc+0x112/0x5c0 [nf_tables_set]
[  430.313559]  process_one_work+0xc13/0x1ec0
[  430.313559]  ? _raw_spin_unlock_irq+0x29/0x40
[  430.313559]  ? pwq_dec_nr_in_flight+0x3c0/0x3c0
[  430.313559]  ? set_load_weight+0x270/0x270
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x40/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x40/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x40/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x40/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __schedule+0x6d3/0x1f50
[  430.313559]  ? find_held_lock+0x39/0x1c0
[  430.313559]  ? __sched_text_start+0x8/0x8
[  430.313559]  ? cyc2ns_read_end+0x10/0x10
[  430.313559]  ? save_trace+0x300/0x300
[  430.313559]  ? sched_clock_local+0xd4/0x140
[  430.313559]  ? find_held_lock+0x39/0x1c0
[  430.313559]  ? worker_thread+0x353/0x1120
[  430.313559]  ? worker_thread+0x353/0x1120
[  430.313559]  ? lock_contended+0xe70/0xe70
[  430.313559]  ? __lock_acquire+0x4500/0x4500
[  430.535635]  ? do_raw_spin_unlock+0xa5/0x330
[  430.535635]  ? do_raw_spin_trylock+0x101/0x1a0
[  430.535635]  ? do_raw_spin_lock+0x1f0/0x1f0
[  430.535635]  ? _raw_spin_lock_irq+0x10/0x70
[  430.535635]  worker_thread+0x15d/0x1120
[ ... ]

Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

rxrpc: Fix error distribution

Fix error distribution by immediately delivering the errors to all the
affected calls rather than deferring them to a worker thread.  The problem
with the latter is that retries and things can happen in the meantime when we
want to stop that sooner.

To this end:

(1) Stop the error distributor from removing calls from the error_targets
     list so that peer->lock isn't needed to synchronise against other adds
     and removals.

(2) Require the peer's error_targets list to be accessed with RCU, thereby
     avoiding the need to take peer->lock over distribution.

(3) Don't attempt to affect a call's state if it is already marked complete.

Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc: Fix transport sockopts to get IPv4 errors on an IPv6 socket

It seems that enabling IPV6_RECVERR on an IPv6 socket doesn't also turn on
IP_RECVERR, so neither local errors nor ICMP-transported remote errors from
IPv4 peer addresses are returned to the AF_RXRPC protocol.

Make the sockopt setting code in rxrpc_open_socket() fall through from the
AF_INET6 case to the AF_INET case to turn on all the AF_INET options too in
the AF_INET6 case.

Fixes: f2aeed3a591f ("rxrpc: Fix error reception on AF_INET6 sockets")
Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc: Make service call handling more robust

Make the following changes to improve the robustness of the code that sets
up a new service call:

(1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a
     service ID check and pass that along to rxrpc_new_incoming_call().
     This means that I can remove the check from rxrpc_new_incoming_call()
     without the need to worry about the socket attached to the local
     endpoint getting replaced - which would invalidate the check.

(2) Cache the rxrpc_peer struct, thereby allowing the peer search to be
     done once.  The peer is passed to rxrpc_new_incoming_call(), thereby
     saving the need to repeat the search.

     This also reduces the possibility of rxrpc_publish_service_conn()
     BUG()'ing due to the detection of a duplicate connection, despite the
     initial search done by rxrpc_find_connection_rcu() having turned up
     nothing.

     This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be
     non-reentrant and the result of the initial search should still hold
     true, but it has proven possible to hit.

     I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short
     the iteration over the hash table if it finds a matching peer with a
     zero usage count, but I don't know for sure since it's only ever been
     hit once that I know of.

     Another possibility is that a bug in rxrpc_data_ready() that checked
     the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag
     might've let through a packet that caused a spurious and invalid call
     to be set up.  That is addressed in another patch.

(3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero
     usage count rather than stopping and returning not found, just in case
     there's another peer record behind it in the bucket.

(4) Don't search the peer records in rxrpc_alloc_incoming_call(), but
     rather either use the peer cached in (2) or, if one wasn't found,
     preemptively install a new one.

Fixes: 8496af50eb38 ("rxrpc: Use RCU to access a peer's service connection tree")
Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc: Improve up-front incoming packet checking

Do more up-front checking on incoming packets to weed out invalid ones and
also ones aimed at services that we don't support.

Whilst we're at it, replace the clearing of call and skew if we don't find
a connection with just initialising the variables to zero at the top of the
function.

Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc: Emit BUSY packets when supposed to rather than ABORTs

In the input path, a received sk_buff can be marked for rejection by
setting RXRPC_SKB_MARK_* in skb->mark and, if needed, some auxiliary data
(such as an abort code) in skb->priority. The rejection is handled by
queueing the sk_buff up for dealing with in process context. The output
code reads the mark and priority and, theoretically, generates an
appropriate response packet.

However, if RXRPC_SKB_MARK_BUSY is set, this isn't noticed and an ABORT
message with a random abort code is generated (since skb->priority wasn't
set to anything).

Fix this by outputting the appropriate sort of packet.

Also, whilst we're at it, most of the marks are no longer used, so remove
them and rename the remaining two to something more obvious.

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc: Fix RTT gathering

Fix RTT information gathering in AF_RXRPC by the following means:

(1) Enable Rx timestamping on the transport socket with SO_TIMESTAMPNS.

(2) If the sk_buff doesn't have a timestamp set when rxrpc_data_ready()
     collects it, set it at that point.

(3) Allow ACKs to be requested on the last packet of a client call, but
     not a service call.  We need to be careful lest we undo:

bf7d620abf22c321208a4da4f435e7af52551a21
Author: David Howells <dhowells@redhat.com>
Date:   Thu Oct 6 08:11:51 2016 +0100
rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase

     but that only really applies to service calls that we're handling,
     since the client side gets to send the final ACK (or not).

(4) When about to transmit an ACK or DATA packet, record the Tx timestamp
     before only; don't update the timestamp afterwards.

(5) Switch the ordering between recording the serial and recording the
     timestamp to always set the serial number first.  The serial number
     shouldn't be seen referenced by an ACK packet until we've transmitted
     the packet bearing it - so in the Rx path, we don't need the timestamp
     until we've checked the serial number.

Fixes: cf1a6474f807 ("rxrpc: Add per-peer RTT tracker")
Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc: Fix checks as to whether we should set up a new call

There's a check in rxrpc_data_ready() that's checking the CLIENT_INITIATED
flag in the packet type field rather than in the packet flags field.

Fix this by creating a pair of helper functions to check whether the packet
is going to the client or to the server and use them generally.

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>

ieee802154: mcr20a: Replace magic number with constants

The combination of defined constants are used to present the
state of IRQ so the magic numbers has been replaced.

This is a simple coding style change which should have no impact on
runtime code execution.

Signed-off-by: Xue Liu <liuxuenetmail@gmail.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

rxrpc: Remove dup code from rxrpc_find_connection_rcu()

rxrpc_find_connection_rcu() initialises variable k twice with the same
information. Remove one of the initialisations.

Signed-off-by: David Howells <dhowells@redhat.com>

ieee802154: ca8210: remove redundant condition check before debugfs_remove

debugfs_remove has taken the IS_ERR into account. Just
remove the unnecessary condition.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds

Use array_index_nospec() to sanitize i with respect to speculation.

Note that the user doesn't control i directly, but can make it out
of bounds by not finding a threshold in the array.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
[add note about user control, as explained by Masashi]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net-tcp: /proc/sys/net/ipv4/tcp_probe_interval is a u32 not int

(fix documentation and sysctl access to treat it as such)

Tested:
  # zcat /proc/config.gz | egrep ^CONFIG_HZ
  CONFIG_HZ_1000=y
  CONFIG_HZ=1000
  # echo $[(1<<32)/1000 + 1] | tee /proc/sys/net/ipv4/tcp_probe_interval
  4294968
  tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument
  # echo $[(1<<32)/1000] | tee /proc/sys/net/ipv4/tcp_probe_interval
  4294967
  # echo 0 | tee /proc/sys/net/ipv4/tcp_probe_interval
  # echo -1 | tee /proc/sys/net/ipv4/tcp_probe_interval
  -1
  tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix TX timeout during netpoll.

The current netpoll implementation in the bnxt_en driver has problems
that may miss TX completion events. bnxt_poll_work() in effect is
only handling at most 1 TX packet before exiting. In addition,
there may be in flight TX completions that ->poll() may miss even
after we fix bnxt_poll_work() to handle all visible TX completions.
netpoll may not call ->poll() again and HW may not generate IRQ
because the driver does not ARM the IRQ when the budget (0 for netpoll)
is reached.

We fix it by handling all TX completions and to always ARM the IRQ
when we exit ->poll() with 0 budget.

Also, the logic to ACK the completion ring in case it is almost filled
with TX completions need to be adjusted to take care of the 0 budget
case, as discussed with Eric Dumazet <edumazet@google.com>

Reported-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vxlan: fill ttl inherit info

When add vxlan ttl inherit support, I forgot to fill it when dump
vlxan info. Fix it now.

Fixes: 72f6d71e491e6 ("vxlan: add ttl inherit support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: sfp: Fix unregistering of HWMON SFP device

A HWMON device is only registered is the SFP module supports the
diagnostic page and is complient to SFF8472. Don't unconditionally
unregister the hwmon device when the SFP module is remove, otherwise
we access data structures which don't exist.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Avoid implicit enum conversion in qed_iwarp_parse_rx_pkt

Clang warns when one enumerated type is implicitly converted to another.

drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1713:25: warning: implicit
conversion from enumeration type 'enum tcp_ip_version' to different
enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion]
                cm_info->ip_version = TCP_IPV4;
                                    ~ ^~~~~~~~
drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1733:25: warning: implicit
conversion from enumeration type 'enum tcp_ip_version' to different
enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion]
                cm_info->ip_version = TCP_IPV6;
                                    ~ ^~~~~~~~
2 warnings generated.

Use the appropriate values from the expected type, qed_tcp_ip_version:

TCP_IPV4 = QED_TCP_IPV4 = 0
TCP_IPV6 = QED_TCP_IPV6 = 1

Link: https://github.com/ClangBuiltLinux/linux/issues/125
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Avoid constant logical operation warning in qed_vf_pf_acquire

Clang warns when a constant is used in a boolean context as it thinks a
bitwise operation may have been intended.

drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: warning: use of logical
'&&' with constant operand [-Wconstant-logical-operand]
        if (!p_iov->b_pre_fp_hsi &&
                                 ^
drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: use '&' for a
bitwise operation
        if (!p_iov->b_pre_fp_hsi &&
                                 ^~
                                 &
drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: remove constant
to silence this warning
        if (!p_iov->b_pre_fp_hsi &&
                                ~^~
1 warning generated.

This has been here since commit 1fe614d10f45 ("qed: Relax VF firmware
requirements") and I am not entirely sure why since 0 isn't a special
case. Just remove the statement causing Clang to warn since it isn't
required.

Link: https://github.com/ClangBuiltLinux/linux/issues/126
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: avoid possible dead-lock

Syzkaller reported this on a slightly older kernel but it's still
applicable to the current kernel -

======================================================
WARNING: possible circular locking dependency detected
4.18.0-next-20180823+ #46 Not tainted
------------------------------------------------------
syz-executor4/26841 is trying to acquire lock:
00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652

but task is already holding lock:
00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline]
00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (rtnl_mutex){+.+.}:
       __mutex_lock_common kernel/locking/mutex.c:925 [inline]
       __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
       mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
       rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
       bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline]
       bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320
       process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153
       worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
       kthread+0x35a/0x420 kernel/kthread.c:246
       ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

-> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}:
       process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129
       worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
       kthread+0x35a/0x420 kernel/kthread.c:246
       ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

-> #0 ((wq_completion)bond_dev->name){+.+.}:
       lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
       flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
       drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
       destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
       __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
       bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
       register_netdevice+0x337/0x1100 net/core/dev.c:8410
       bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
       rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
       rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
       netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
       rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
       netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
       netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
       netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
       sock_sendmsg_nosec net/socket.c:622 [inline]
       sock_sendmsg+0xd5/0x120 net/socket.c:632
       ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
       __sys_sendmsg+0x11d/0x290 net/socket.c:2153
       __do_sys_sendmsg net/socket.c:2162 [inline]
       __se_sys_sendmsg net/socket.c:2160 [inline]
       __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
       do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

other info that might help us debug this:

Chain exists of:
  (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock((work_completion)(&(&nnw->work)->work));
                               lock(rtnl_mutex);
  lock((wq_completion)bond_dev->name);

*** DEADLOCK ***

1 lock held by syz-executor4/26841:

stack backtrace:
CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222
check_prev_add kernel/locking/lockdep.c:1862 [inline]
check_prevs_add kernel/locking/lockdep.c:1975 [inline]
validate_chain kernel/locking/lockdep.c:2416 [inline]
__lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412
lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
__alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
register_netdevice+0x337/0x1100 net/core/dev.c:8410
bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:632
___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
__sys_sendmsg+0x11d/0x290 net/socket.c:2153
__do_sys_sendmsg net/socket.c:2162 [inline]
__se_sys_sendmsg net/socket.c:2160 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457089
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: pass link-local packets to bonding master also.

Commit b89f04c61efe ("bonding: deliver link-local packets with
skb->dev set to link that packets arrived on") changed the behavior
of how link-local-multicast packets are processed. The change in
the behavior broke some legacy use cases where these packets are
expected to arrive on bonding master device also.

This patch passes the packet to the stack with the link it arrived
on as well as passes to the bonding-master device to preserve the
legacy use case.

Fixes: b89f04c61efe ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on")
Reported-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Avoid implicit enum conversion in qed_roce_mode_to_flavor

Clang warns when one enumerated type is implicitly converted to another.

drivers/net/ethernet/qlogic/qed/qed_roce.c:153:12: warning: implicit
conversion from enumeration type 'enum roce_mode' to different
enumeration type 'enum roce_flavor' [-Wenum-conversion]
                flavor = ROCE_V2_IPV6;
                       ~ ^~~~~~~~~~~~
drivers/net/ethernet/qlogic/qed/qed_roce.c:156:12: warning: implicit
conversion from enumeration type 'enum roce_mode' to different
enumeration type 'enum roce_flavor' [-Wenum-conversion]
                flavor = MAX_ROCE_MODE;
                       ~ ^~~~~~~~~~~~~
2 warnings generated.

Use the appropriate values from the expected type, roce_flavor:

ROCE_V2_IPV6 = RROCE_IPV6 = 2
MAX_ROCE_MODE = MAX_ROCE_FLAVOR = 3

While we're add it, ditch the local variable flavor, we can just return
the value directly from the switch statement.

Link: https://github.com/ClangBuiltLinux/linux/issues/125
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix mask parameter in qed_vf_prep_tunn_req_tlv

Clang complains when one enumerated type is implicitly converted to
another.

drivers/net/ethernet/qlogic/qed/qed_vf.c:686:6: warning: implicit
conversion from enumeration type 'enum qed_tunn_mode' to different
enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
QED_MODE_L2GENEVE_TUNN,
^~~~~~~~~~~~~~~~~~~~~~

Update mask's parameter to expect qed_tunn_mode, which is what was
intended.

Link: https://github.com/ClangBuiltLinux/linux/issues/125
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Avoid implicit enum conversion in qed_set_tunn_cls_info

Clang warns when one enumerated type is implicitly converted to another.

drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:163:25: warning:
implicit conversion from enumeration type 'enum tunnel_clss' to
different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
        p_tun->vxlan.tun_cls = type;
                             ~ ^~~~
drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:165:26: warning:
implicit conversion from enumeration type 'enum tunnel_clss' to
different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
        p_tun->l2_gre.tun_cls = type;
                              ~ ^~~~
drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:167:26: warning:
implicit conversion from enumeration type 'enum tunnel_clss' to
different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
        p_tun->ip_gre.tun_cls = type;
                              ~ ^~~~
drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:169:29: warning:
implicit conversion from enumeration type 'enum tunnel_clss' to
different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
        p_tun->l2_geneve.tun_cls = type;
                                 ~ ^~~~
drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:171:29: warning:
implicit conversion from enumeration type 'enum tunnel_clss' to
different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
        p_tun->ip_geneve.tun_cls = type;
                                 ~ ^~~~
5 warnings generated.

Avoid this by changing type to an int.

Link: https://github.com/ClangBuiltLinux/linux/issues/125
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wimax/i2400m: fix spelling mistake "not unitialized" -> "uninitialized"

Trivial fix to spelling mistake in ms_to_errno array of error messages
and remove confusing "not" from the error text since the error code
refers to an uninitialized error code.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: fix spelling mistake "toogle" -> "toggle"

Trivial fix to spelling mistake in DP_VERBOSE message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-phy-fix-WoL-handling-when-suspending-the-PHY'

Heiner Kallweit says:

====================
net: phy: fix WoL handling when suspending the PHY

phy_suspend doesn't always recognize that WoL is enabled and therefore
suspends the PHY when it should not. First idea to address the issue
was to reuse checks used in mdio_bus_phy_may_suspend which check
whether relevant devices are wakeup-enabled.
Florian raised some concerns because drivers may enable wakeup even if
WoL isn't enabled (e.g. certain USB network drivers).

The new approach focuses on reducing the risk to break existing stuff.
We add a flag wol_enabled to struct net_device which is set in
ethtool_set_wol(). Then this flag is checked in phy_suspend().
This doesn't cover 100% of the cases yet (e.g. if WoL is enabled w/o
explicit configuration), but it covers the most relevant cases with
very little risk of regressions.

v2:
- Fix a typo
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: fix WoL handling when suspending the PHY

Core of the problem is that phy_suspend() suspends the PHY when it
should not because of WoL. phy_suspend() checks for WoL already, but
this works only if the PHY driver handles WoL (what is rarely the case).
Typically WoL is handled by the MAC driver.

This patch uses new member wol_enabled of struct net_device as
additional criteria in the check when not to suspend the PHY because
of WoL.

Last but not least change phy_detach() to call phy_suspend() before
attached_dev is set to NULL. phy_suspend() accesses attached_dev
when checking whether the MAC driver activated WoL.

Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Fixes: e8cfd9d6c772 ("net: phy: call state machine synchronously in phy_stop")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: core: add member wol_enabled to struct net_device

Add flag wol_enabled to struct net_device indicating whether
Wake-on-LAN is enabled. As first user phy_suspend() will use it to
decide whether PHY can be suspended or not.

Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Fixes: e8cfd9d6c772 ("net: phy: call state machine synchronously in phy_stop")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: phy: fix WoL handling when suspending the PHY"

This reverts commit e0511f6c1ccdd153cf063764e93ac177a8553c5d.

I commited the wrong version of these changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: fix WoL handling when suspending the PHY

Actually there's nothing wrong with the two changes marked as "Fixes",
they just revealed a problem which has been existing before.
After having switched r8169 to phylib it was reported that WoL from
shutdown doesn't work any longer (WoL from suspend isn't affected).
Reason is that during shutdown phy_disconnect()->phy_detach()->
phy_suspend() is called.
A similar issue occurs when the phylib state machine calls
phy_suspend() when handling state PHY_HALTED.

Core of the problem is that phy_suspend() suspends the PHY when it
should not due to WoL. phy_suspend() checks for WoL already, but this
works only if the PHY driver handles WoL (what is rarely the case).
Typically WoL is handled by the MAC driver.

phylib knows about this and handles it in mdio_bus_phy_may_suspend(),
but that's used only when suspending the system, not in other cases
like shutdown.

Therefore factor out the relevant check from
mdio_bus_phy_may_suspend() to a new function phy_may_suspend() and
use it in phy_suspend().

Last but not least change phy_detach() to call phy_suspend() before
attached_dev is set to NULL. phy_suspend() accesses attached_dev
when checking whether the MAC driver activated WoL.

Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Fixes: e8cfd9d6c772 ("net: phy: call state machine synchronously in phy_stop")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6: Remove extra call to ip6_convert_metrics for multipath case

The change to move metrics from the dst to rt6_info moved the call
to ip6_convert_metrics from ip6_route_add to ip6_route_info_create. In
doing so it makes the call in ip6_route_info_append redundant and
actually leaks the metrics installed as part of the ip6_route_info_create.
Remove the now unnecessary call.

Fixes: d4ead6b34b67f ("net/ipv6: move metrics from dst to rt6_info")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bluetooth: SMP: fix crash in unpairing

In case unpair_device() was called through mgmt interface at the same time
when pairing was in progress, Bluetooth kernel module crash was seen.

[  600.351225] general protection fault: 0000 [#1] SMP PTI
[  600.351235] CPU: 1 PID: 11096 Comm: btmgmt Tainted: G           OE     4.19.0-rc1+ #1
[  600.351238] Hardware name: Dell Inc. Latitude E5440/08RCYC, BIOS A18 05/14/2017
[  600.351272] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[  600.351276] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[  600.351279] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[  600.351282] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[  600.351285] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[  600.351287] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[  600.351290] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[  600.351292] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[  600.351295] FS:  00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[  600.351298] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  600.351300] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
[  600.351302] Call Trace:
[  600.351325]  smp_failure+0x4f/0x70 [bluetooth]
[  600.351345]  smp_cancel_pairing+0x74/0x80 [bluetooth]
[  600.351370]  unpair_device+0x1c1/0x330 [bluetooth]
[  600.351399]  hci_sock_sendmsg+0x960/0x9f0 [bluetooth]
[  600.351409]  ? apparmor_socket_sendmsg+0x1e/0x20
[  600.351417]  sock_sendmsg+0x3e/0x50
[  600.351422]  sock_write_iter+0x85/0xf0
[  600.351429]  do_iter_readv_writev+0x12b/0x1b0
[  600.351434]  do_iter_write+0x87/0x1a0
[  600.351439]  vfs_writev+0x98/0x110
[  600.351443]  ? ep_poll+0x16d/0x3d0
[  600.351447]  ? ep_modify+0x73/0x170
[  600.351451]  do_writev+0x61/0xf0
[  600.351455]  ? do_writev+0x61/0xf0
[  600.351460]  __x64_sys_writev+0x1c/0x20
[  600.351465]  do_syscall_64+0x5a/0x110
[  600.351471]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  600.351474] RIP: 0033:0x7fb2bdb62fe0
[  600.351477] Code: 73 01 c3 48 8b 0d b8 6e 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 69 c7 2c 00 00 75 10 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 de 80 01 00 48 89 04 24
[  600.351479] RSP: 002b:00007ffe062cb8f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
[  600.351484] RAX: ffffffffffffffda RBX: 000000000255b3d0 RCX: 00007fb2bdb62fe0
[  600.351487] RDX: 0000000000000001 RSI: 00007ffe062cb920 RDI: 0000000000000004
[  600.351490] RBP: 00007ffe062cb920 R08: 000000000255bd80 R09: 0000000000000000
[  600.351494] R10: 0000000000000353 R11: 0000000000000246 R12: 0000000000000001
[  600.351497] R13: 00007ffe062cbbe0 R14: 0000000000000000 R15: 0000000000000000
[  600.351501] Modules linked in: algif_hash algif_skcipher af_alg cmac ipt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter bridge stp llc overlay arc4 nls_iso8859_1 dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp dell_laptop kvm_intel crct10dif_pclmul dell_smm_hwmon crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper intel_cstate intel_rapl_perf uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media hid_multitouch input_leds joydev serio_raw dell_wmi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic dell_smbios dcdbas sparse_keymap
[  600.351569]  snd_hda_intel btusb snd_hda_codec btrtl btbcm btintel snd_hda_core bluetooth(OE) snd_hwdep snd_pcm iwlmvm ecdh_generic wmi_bmof dell_wmi_descriptor snd_seq_midi mac80211 snd_seq_midi_event lpc_ich iwlwifi snd_rawmidi snd_seq snd_seq_device snd_timer cfg80211 snd soundcore mei_me mei dell_rbtn dell_smo8800 mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid i915 nouveau kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi psmouse ahci sdhci_pci cqhci libahci fb_sys_fops sdhci drm e1000e video wmi
[  600.351637] ---[ end trace e49e9f1df09c94fb ]---
[  600.351664] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[  600.351666] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[  600.351669] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[  600.351672] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[  600.351674] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[  600.351676] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[  600.351679] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[  600.351681] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[  600.351684] FS:  00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[  600.351686] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  600.351689] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0

Crash happened because list_del_rcu() was called twice for smp->ltk. This
was possible if unpair_device was called right after ltk was generated
but before keys were distributed.

In this commit smp_cancel_pairing was refactored to cancel pairing if it
is in progress and otherwise just removes keys. Once keys are removed from
rcu list, pointers to smp context's keys are set to NULL to make sure
removed list items are not accessed later.

This commit also adjusts the functionality of mgmt unpair_device() little
bit. Previously pairing was canceled only if pairing was in state that
keys were already generated. With this commit unpair_device() cancels
pairing already in earlier states.

Bug was found by fuzzing kernel SMP implementation using Synopsys
Defensics.

Reported-by: Pekka Oikarainen <pekka.oikarainen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

mac80211_hwsim: do not omit multicast announce of first added radio

The allocation of hwsim radio identifiers uses a post-increment from 0,
so the first radio has idx 0. This idx is explicitly excluded from
multicast announcements ever since, but it is unclear why.

Drop that idx check and announce the first radio as well. This makes
userspace happy if it relies on these events.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211_hwsim: fix race in radio destruction from netlink notifier

The asynchronous destruction from a work-queue of radios tagged with
destroy-on-close may race with the owning namespace about to exit,
resulting in potential use-after-free of that namespace.

Instead of using a work-queue, move radios about to destroy to a
temporary list, which can be worked on synchronously after releasing
the lock. This should be safe to do from the netlink socket notifier,
as the namespace is guaranteed to not get released.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211_hwsim: fix locking when iterating radios during ns exit

The cleanup of radios during namespace exit has recently been reworked
to directly delete a radio while temporarily releasing the spinlock,
fixing a race condition between the work-queue execution and namespace
exits. However, the temporary unlock allows unsafe modifications on the
iterated list, resulting in a potential crash when continuing the
iteration of additional radios.

Move radios about to destroy to a temporary list, and clean that up
after releasing the spinlock once iteration is complete.

Fixes: 8cfd36a0b53a ("mac80211_hwsim: fix use-after-free bug in hwsim_exit_net")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

nl80211: Fix possible Spectre-v1 for NL80211_TXRATE_HT

Use array_index_nospec() to sanitize ridx with respect to speculation.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: fix reg_query_regdb_wmm kernel-doc

Drop @ptr from kernel-doc for function reg_query_regdb_wmm().
This function parameter was recently removed so update the
kernel-doc to match that and remove the kernel-doc warnings.

Removes 109 occurrences of this warning message:
../include/net/cfg80211.h:4869: warning: Excess function parameter 'ptr' description in 'reg_query_regdb_wmm'

Fixes: 38cb87ee47fb ("cfg80211: make wmm_rule part of the reg_rule structure")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: allocate TXQs for active monitor interfaces

Monitor mode interfaces with the active flag are passed down to the driver.
Drivers using TXQ expect that all interfaces have allocated TXQs before
they get added.

Fixes: 79af1f866193d ("mac80211: avoid allocating TXQs that won't be used")
Cc: stable@vger.kernel.org
Reported-by: Catrinel Catrinescu <cc@80211.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

tipc: lock wakeup & inputq at tipc_link_reset()

In tipc_link_reset() we copy the wakeup queue to input queue using
skb_queue_splice_init(link->wakeupq, link->inputq).
This is performed without holding any locks. The lists might be
simultaneously be accessed by other cpu threads in tipc_sk_rcv(),
something leading to to random missing packets.

Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: reset bearer if device carrier not ok

If we detect that under lying carrier detects errors and goes down,
we reset the bearer.

Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix flow control accounting for implicit connect

In the case of implicit connect message with data > 1K, the flow
control accounting is incorrect. At this state, the socket does not
know the peer nodes capability and falls back to legacy flow control
by return 1, however the receiver of this message will perform the
new block accounting. This leads to a slack and eventually traffic
disturbance.

In this commit, we perform tipc_node_get_capabilities() at implicit
connect and perform accounting based on the peer's capability.

Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: fix for unmapping problem when SMMU is on

If SMMU is on, there is more likely that skb_shinfo(skb)->frags[i]
can not send by a single BD. when this happen, the
hns_nic_net_xmit_hw function map the whole data in a frags using
skb_frag_dma_map, but unmap each BD' data individually when tx is
done, which causes problem when SMMU is on.

This patch fixes this problem by ummapping the whole data in a
frags when tx is done.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'xen-netback-hash'

Jan Beulich says:

====================
xen-netback: hash mapping handling adjustments

First and foremost the fix for XSA-270. On top of that further changes
which looked desirable to me while investigating that XSA.

1: fix input validation in xenvif_set_hash_mapping()
2: validate queue numbers in xenvif_set_hash_mapping()
3: handle page straddling in xenvif_set_hash_mapping()
====================

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: handle page straddling in xenvif_set_hash_mapping()

There's no guarantee that the mapping array doesn't cross a page
boundary. Use a second grant copy operation if necessary.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: validate queue numbers in xenvif_set_hash_mapping()

Checking them before the grant copy means nothing as to the validity of
the incoming request. As we shouldn't make the new data live before
having validated it, introduce a second instance of the mapping array.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: fix input validation in xenvif_set_hash_mapping()

Both len and off are frontend specified values, so we need to make
sure there's no overflow when adding the two for the bounds check. We
also want to avoid undefined behavior and hence use off to index into
->hash.mapping[] only after bounds checking. This at the same time
allows to take care of not applying off twice for the bounds checking
against vif->num_queues.

It is also insufficient to bounds check copy_op.len, as this is len
truncated to 16 bits.

This is XSA-270 / CVE-2018-15471.

Reported-by: Felix Wilhelm <fwilhelm@google.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Tested-by: Paul Durrant <paul.durrant@citrix.com>
Cc: stable@vger.kernel.org [4.7 onwards]
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Clean 64b dma addresses if they are not detected

Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is
not detected on 64bit system.
The issue was observed when bootloader(u-boot) does not check macb
feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support
by default. Then macb driver is reading DMACFG register back and only
adding 64bit dma configuration but not cleaning it out.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

James writes:
  "SCSI fixes on 20180925

   Nine obvious bug fixes mostly in individual drivers.  The target fix
   is of particular importance because it's CVE related."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: don't crash the host on invalid commands
  scsi: ipr: System hung while dlpar adding primary ipr adapter back
  scsi: target: iscsi: Use bin2hex instead of a re-implementation
  scsi: target: iscsi: Use hex2bin instead of a re-implementation
  scsi: lpfc: Synchronize access to remoteport via rport
  scsi: ufs: Disable blk-mq for now
  scsi: sd: Contribute to randomness when running rotational device
  scsi: ibmvscsis: Ensure partition name is properly NUL terminated
  scsi: ibmvscsis: Fix a stringop-overflow warning

Merge tag 'usb-4.19-rc6' of git://git./linux/kernel/git/gregkh/usb

I wrote:
  "USB fixes for 4.19-rc6

   Here are some small USB core and driver fixes for reported issues for
   4.19-rc6.

   The most visible is the oops fix for when the USB core is built into the
   kernel that is present in 4.18.  Turns out not many people actually do
   that so it went unnoticed for a while.  The rest is some tiny typec,
   musb, and other core fixes.

   All have been in linux-next with no reported issues."

* tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: mux: Take care of driver module reference counting
  usb: core: safely deal with the dynamic quirk lists
  usb: roles: Take care of driver module reference counting
  USB: handle NULL config in usb_find_alt_setting()
  USB: fix error handling in usb_driver_claim_interface()
  USB: remove LPM management from usb_driver_claim_interface()
  USB: usbdevfs: restore warning for nonsensical flags
  USB: usbdevfs: sanitize flags more
  Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"
  usb: musb: dsps: do not disable CPPI41 irq in driver teardown

Merge tag 'tty-4.19-rc6' of git://git./linux/kernel/git/gregkh/tty

I wrote:
  "TTY/Serial driver fixes for 4.19-rc6

   Here are a number of small tty and serial driver fixes for reported
   issues for 4.19-rc6.

   One should hopefully resolve a much-reported issue that syzbot has found
   in the tty layer.  Although there are still more issues there, getting
   this fixed is nice to see finally happen.

   All of these have been in linux-next for a while with no reported
   issues."

* tag 'tty-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: imx: restore handshaking irq for imx1
  tty: vt_ioctl: fix potential Spectre v1
  tty: Drop tty->count on tty_reopen() failure
  serial: cpm_uart: return immediately from console poll
  tty: serial: lpuart: avoid leaking struct tty_struct
  serial: mvebu-uart: Fix reporting of effective CSIZE to userspace

Merge tag 'char-misc-4.19-rc6' of git://git./linux/kernel/git/gregkh/char-misc

Greg (well I), wrote:
  "Char/Misc driver fixes for 4.19-rc6

   Here are some soundwire and intel_th (tracing) driver fixes for some
   reported issues.

   All of these have been in linux-next for a week with no reported issues."

* tag 'char-misc-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  intel_th: pci: Add Ice Lake PCH support
  intel_th: Fix resource handling for ACPI glue layer
  intel_th: Fix device removal logic
  soundwire: Fix acquiring bus lock twice during master release
  soundwire: Fix incorrect exit after configuring stream
  soundwire: Fix duplicate stream state assignment

Revert "uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name"

This changes UAPI, breaking iwd and libell:

  ell/key.c: In function 'kernel_dh_compute':
  ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'?
    struct keyctl_dh_params params = { .private = private,
                                        ^~~~~~~
                                        dh_private

This reverts commit 8a2336e549d385bb0b46880435b411df8d8200e8.

Fixes: 8a2336e549d3 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Randy Dunlap <rdunlap@infradead.org>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: James Morris <jmorris@namei.org>
cc: "Serge E. Hallyn" <serge@hallyn.com>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: <stable@vger.kernel.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge gitolite./pub/scm/linux/kernel/git/davem/net

Dave writes:
  "Networking fixes:

  1) Fix multiqueue handling of coalesce timer in stmmac, from Jose
     Abreu.

   2) Fix memory corruption in NFC, from Suren Baghdasaryan.

   3) Don't write reserved bits in ravb driver, from Kazuya Mizuguchi.

   4) SMC bug fixes from Karsten Graul, YueHaibing, and Ursula Braun.

   5) Fix TX done race in mvpp2, from Antoine Tenart.

   6) ipv6 metrics leak, from Wei Wang.

   7) Adjust firmware version requirements in mlxsw, from Petr Machata.

   8) Fix autonegotiation on resume in r8169, from Heiner Kallweit.

   9) Fixed missing entries when dumping /proc/net/if_inet6, from Jeff
      Barnhill.

   10) Fix double free in devlink, from Dan Carpenter.

   11) Fix ethtool regression from UFO feature removal, from Maciej
       Żenczykowski.

   12) Fix drivers that have a ndo_poll_controller() that captures the
       cpu entirely on loaded hosts by trying to drain all rx and tx
       queues, from Eric Dumazet.

   13) Fix memory corruption with jumbo frames in aquantia driver, from
       Friedemann Gerold."

* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (79 commits)
  net: mvneta: fix the remaining Rx descriptor unmapping issues
  ip_tunnel: be careful when accessing the inner header
  mpls: allow routes on ip6gre devices
  net: aquantia: memory corruption on jumbo frames
  tun: remove ndo_poll_controller
  nfp: remove ndo_poll_controller
  bnxt: remove ndo_poll_controller
  bnx2x: remove ndo_poll_controller
  mlx5: remove ndo_poll_controller
  mlx4: remove ndo_poll_controller
  i40evf: remove ndo_poll_controller
  ice: remove ndo_poll_controller
  igb: remove ndo_poll_controller
  ixgb: remove ndo_poll_controller
  fm10k: remove ndo_poll_controller
  ixgbevf: remove ndo_poll_controller
  ixgbe: remove ndo_poll_controller
  bonding: use netpoll_poll_dev() helper
  netpoll: make ndo_poll_controller() optional
  rds: Fix build regression.
  ...