V4L/DVB (6569): bt8xx/dst.c: make code static

This patch makes the following needlessly global code static:
- dst_gpio_outb()
- dst_gpio_inb()
- rdc_8820_reset()
- dst_pio_enable()
- dst_command()
- struct tuner_list[]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6564): Move check before lock

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
CC: Antti Palosaari <crope@iki.fi>
CC: Carl Lundqvist <comabug@gmail.com>
CC: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6563): tda8290: optimize for loop in tda829x_probe function

Thanks to Trent Piepho for pointing this out.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6562): Make HVR900 to use also tveeprom

Hauppauge firmwares can be decoded using tveeprom. This patch adds HVR-900 as
a tveeprom client. It also adds xc3028 tuner entry to tveeprom.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6561): Fix xc2028 get register functions and calls

The status registers require a dword for setting register. Fix it on all
occurrences, and at xc3028_get_reg. Also, improves the hardware/firmware
detection printk.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6560): Fix a bug when setting tuner type

Tuner-type were correctly filled only by the hint function.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6559): Fix a buffer overflow at xc2028_get_reg

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6557): tea5767: remove unnecessary warning

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6556): tuner: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6555): tuner: reorder functions to prepare for i2c conversion

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6553): tuner: replace default_mode_mask

The default_mode_mask global is replaced by a list of tuner structs. The
tuner driver now walks that list to see which radio and/or tv tuner
devices are registered to a given i2c adapter.

The default_mode_mask global had to go since this is no longer supported
with the new bus-based I2C API.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6551): tda8290: rule out tda988x before detecting tda8290/tda8295

To ensure prevention of detecting a tda9885/6/7 as a tda8290 or tda8295, we
will rule out the tda988x before testing the tda8290 / tda8295 id registers.

We read 8 bytes from the chip.  If they are all equal, then it is not a
tda829x, or some other error has occurred.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6550): tda8290: return -ENODEV on probe failures

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB(6548b) Fix compilation for em28xx

From: Mauro Carvalho Chehab <mchehab@infradead.org>

In file included from drivers/media/video/em28xx/em28xx-i2c.c:31:
drivers/media/video/tuner-xc2028.h:10:26: error: dvb_frontend.h: No such file or directory

In file included from drivers/media/video/em28xx/em28xx-i2c.c:31:
drivers/media/video/tuner-xc2028.h:32: warning: 'struct dvb_frontend' declared inside parameter list
drivers/media/video/tuner-xc2028.h:32: warning: its scope is only this definition or declaration, which is probably not what you want

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB(6548a) Fix compilation for TDA8290

From: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/tda8290.c:27:21: error: tda827x.h: No such file or directory
drivers/media/video/tda8290.c:28:22: error: tda18271.h: No such file or directory
drivers/media/video/tda8290.c:52: error: field 'cfg' has incomplete type
drivers/media/video/tda8290.c: In function 'tda829x_find_tuner':
drivers/media/video/tda8290.c:590: error: implicit declaration of function 'tda18271_attach'
drivers/media/video/tda8290.c:598: error: implicit declaration of function 'tda827x_attach'

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6546): Add comments for the hint methods

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6545): em28xx: autodetect Cinergy 200 USB and VGear PocketTV

Adds autodetection support for the Cinergy200 USB and the VGear PocketTV.

Whenever a usb device with generic empia em2800 usb ids is detected the device
gets scanned for connected i2c devices. If the device list matches an em2800
device in the device list the model id gets changed accordingly.

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6543): tda8290: enable probing of tda8295

Prevent the tda8295 from falsely being detected as a tda9887

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6541): Add V-Gear PocketTV to Cardlist.em28xx

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6539): em28xx: add support for vgear pockettv

attached patch adds support for the vgear pockettv.
It seems to require a write to another register for audio to work.
I checked my old cinergydrv and we did the same register write there. I
therefore enabled it for all em2800 based devices.

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6538): em28xx: fix locking to allow accesses from 2 different threads at the same time

The attached patch modifies the em28xx driver so that there can be ioctls from
multiple different threads.

This is necessary for capture apps like MPlayer that use different threads for
capturing and channel tuning.

Now the locking is only done for the ioctls that change properties of the
device or access the i2c bus.

It also removes some locks that look unnecessary:

In em28xx_init_dev:
  the videodevice is not registered yet so nothing can access the hardware
 meanwhile, the device struct is not assigned to the interface yet so no race
 with disconnect is possible

In em28xx_release_resources:
  it gets only called when dev->lock is already held

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6537): Add entry for Pixelview Prolink PlayTV USB 2.0

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6536): Add a hint for boards without unique USB ID

This patch adds a function to allow trying to detect boards that shares
the generic IDs.

The current detection method is based at eeprom checksum.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6535): Fix: Adds the generic PCI IDs for em28xx

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6519): Fix HVR900/HVR950 entry

- Television is now default;
- Add HVR950 name at the entry.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6517): CodingStyle fixup

Used scripts/Lindent + manual check + scripts/checkpatch.pl

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6516): Allow faster loading by using 64 bytes block by em28xx i2c write

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6508): ttpci: Rework Kconfig menus and Makefile

The ttpci Kconfig file has bugs that cause it to fail in certain Kconfig
situations.  The basic problem is that it selects certain drivers, but does
not depend on the dependencies of those drivers.

See http://article.gmane.org/gmane.comp.video.video4linux/35072

Using the Kconfig file also has some annoyances.  For instance one can't turn
off AV7110 support unless you go down several options and first turn off
budget-patch support.  Normally user selectable drivers are not forced on like
this.

The "AV7110 cards with Budget Patch" option is disabled if "Budget cards"
isn't on.  Normally a driver appears nested under a driver it depends on, but
since drivers that don't depend on "Budget cards" are between the two options,
the config programs can't display the tree correctly.

The Makefile has an issue too.  Some modules, ttpci-eeprom and budget-core,
appear in the Makefile under several different config symbols.  If more than
one of these symbols is on, they will get added the to list of objects
multiple times.  The normal convention is to have a config symbol just the
common object(s) and have the users of the that object either depend on or
select that config symbol.

This patch fixes all these issues.  ttpci-eepom is under a new config symbol,
and so is the budget-core module.  The four different budget card types appear
as sub-drivers under a main "SAA7146 DVB cards" option.  Turning on
budget-patch doesn't force AV7110.  Drivers using SAA7146_VV have the
necessary VIDEO_DEV dependency, so that it isn't possible to select SAA7146_VV
without V4L being on.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6507): bttv: whitespace cleanup

Someone wasn't using the v4l-dvb commit scripts and so didn't run the
automatic whitespace cleaner on their code.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6497): saa7146/budget*/dvb-ttpci: Remove V4L1 code

Remove V4L1 code.

Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6496): saa7146_vv.h: remove wrong include <linux/videodev.h>

remove wrong include <linux/videodev.h>

Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6492): tuner: improve tuner_foo printk macros consistency

Alter the tuner_foo printk macros to indicate which module is
generating the message.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6491): tuner: prevent repeated "type set" message unless debug is enabled

The tuner sub-module will usually log its type during its _attach() function,
then tuner-core reports which type was attached when control is returned.

In most cases, we expect to see the same message reported from both locations.
We only need to see this second message if debug is enabled.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6490): Remove EXPERIMENTAL from several i2c drivers

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6489): ivtv: add support for AVerMedia PVR-150 Plus

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6488): ivtv: add ASUS Falcon2 support

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6487): i2c-id: add M52790 driver ID

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6486): m52790: add new Mitsubishi A/V switch i2c driver

This driver is used by the ASUS Falcon2 cx23416-based cards.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6483): ivtv-streams: make file_operations const

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6482): zr364: make file_operations const

zr364: make file_operations const

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6481): radio-gemtek: make file_operations const

make file_operations const

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6480): bttv: uses input functions, should depend on INPUT

Several media drivers use input_(*) functions so they need to depend on
the INPUT config symbol.

drivers/built-in.o: In function `bttv_input_fini':
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:346: undefined reference to `input_unregister_device'
drivers/built-in.o: In function `bttv_input_init':
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:204: undefined reference to `input_allocate_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:335: undefined reference to `input_free_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:321: undefined reference to `input_register_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:335: undefined reference to `input_free_device'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6477): Properly fill MODULE_AUTHOR

Most of the driver were written by Mauro Carvalho Chehab.
DTV parts were added by Michel Ludwig.

Reviewed-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6476): Add support for analog tv on HVR-950

This patch adds USB ID for HVR-950. It also adds the callback for handling
firmware loading.

Thanks to Markus Reichberger for the reset commands.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6475): Fix some troubles at list handling

- priv->count were wrong. Should be incremented since the first usage;
- forgot to use list_del() to remove the driver;
- Release memory if an error occurs during _attach

Thanks to Aidan Thornton <makosoft@googlemail.com> for pointing this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6474): Add support for tuner-xc2028

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6473): Prevents double tuner registering

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6472): Re-inserts xc2028 attach code, fixing its parameters

I2C bus redesign changed i2c parameters. This patch re-adds tuner xc2028
attach function, replacing the parameters to the newer syntax.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6471): tuner: i2c_client cannot be part of the tuner struct

The bus-based I2C subsystem allocates the i2c_client struct. So if in order to
be able to convert the tuner to the bus-based I2C API the embedded i2c_client
struct must be removed from the tuner struct and replaced with a pointer.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6470): Avoid breaking compilation

The next patchset series will change i2c structs inside tuner. This patch
avoids breaking bissect, by commenting the still unused tuner xc2028.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6469): tuner: remove TUNER_PHILIPS_TDA8295

TUNER_PHILIPS_TDA8290 will autodetect a TDA8290 or a TDA8295,
so we don't need this separate entry anymore.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6468): tda8290: auto-detect tda8290 or tda8295

Consolidate tda8290_attach() and tda8295_attach() into a single function,
tda829x_attach(), which will detect chip combinations tda8290 or tda8295 with
tda8275, tda8275a or tda18271.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6467): v4l2-common: minor cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6466): v4l2-i2c-drv: first call remove, then detach client

The remove driver function expects that the client is still attached
to the driver, so do the detach after calling remove().

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6465): Use correct error codes when chip is not recognized

If the chip isn't recognized, then the correct errors should be returned.
The v4l2_i2c_attach() utility function will return 0 for all errors
except -ENOMEM to provide proper compatibility support for the old I2C
probing function.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6464): tlv320aic23b: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6463): upd64031a: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6462): upd64083: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6461): tvaudio: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6460): v4l2-i2c-drv: add legacy_probe function pointer

Some devices do complicated tests whether the device can be probed or not.
Add a legacy_probe function pointer to support that.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6459): cx25840: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6458): cs53l23a: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6457): msp3400: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6456): saa7127: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6455): saa7115: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6454): vp27smpx: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6453): wm8739: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6452): wm8775: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6451): v4l2: add support for bus-based I2C drivers

Two new headers were added: one for I2C drivers that are only used
by V4L2 drivers converted to the new bus-based I2C API, and one that
can be used by both converted and unconverted drivers (at the expense of
some additional overhead).

To support the legacy I2C API a helper function was added to v4l2-common.c.

These headers take care of all the 'boilerplate' code that all V4L2 I2C drivers
have in common and will automatically support the bus-based I2C API introduced
in kernel 2.6.22.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6450): tda9887: add missing module license

This module was always GPL, and will remain GPL

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6449): tda18271: clean up i2c_gate handling

Call analog_demod_ops->i2c_gate_ctrl when in analog tuning mode, and
frontend_ops.i2c_gate_ctrl when in digital tuning mode.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6448): tda8290: fill i2c_gate_ctrl callback

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6447): tuner: add i2c_gate_ctrl function to struct analog_tuner_ops

In some designs, the tuner silicon may be on an i2c bus behind an i2c gate,
controlled by the analog demodulator.  We already have a method to control
such i2c gates when they are controlled by the digital demodulator, but in
some hybrid designs, there may be an i2c gate controlled by each demodulator.

For example, when in analog tuning mode, one would access the tuner by opening
the i2c gate controlled by the analog demodulator, while when in digital
tuning mode, one would access the tuner by opening the i2c gate controlled by
the digital demodulator.

We must add this callback function to analog_tuner_ops in order to handle
such configurations.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6446): tda18271: clean up debug macros

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6445): tuner-core: improve comments inside function fe_release()

Explain who is responsible for freeing analog_demod_priv

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6444): tuner-core: remove excessive parenthesis

Convert all instances of "if ((ops) && (ops->foo))" to "if (ops && ops->foo)"

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6443): make tda9887 build selectable via Kconfig

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6442): move std if setting from tda8290 to tda827x

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6441): tuner: clean up ops checking in tuner_status function

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6440): tuner: convert analog tuner demod sub-modules to dvb_frontend interface

Convert tda9887 and tda8290/5 to dvb_frontend interface

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6439): dvb_frontend: codingstyle cleanups

thanks to checkpatch.pl

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6438): tuner: move analog_demod_priv into struct dvb_frontend

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6437): tuner: clear analog_demod_ops on release

Clear analog_demod_ops on release.
Fix test for analog_demod_ops after tuner attach.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6436): tuner: move analog_tuner_ops into dvb_frontend_ops

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6435): tda8290: add support for NXP TDA18271 tuner and TDA8295 analog demod

Add basic support for NXP TDA8295 analog demod and TDA18271 tuner silicon.

TDA8295 + TDA8275a not yet tested.
TDA8290 + TDA18271 not yet supported.

Digital mode of TDA18271 not yet tested & needs more work.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6434): tda827x: fix GPL export on attach function

EXPORT_SYMBOL should have been EXPORT_SYMBOL_GPL

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6433): Move all tda8275/8275a tuning code from tda8290 module into tda827x module

Add analog tuning support to tda827x dvb_frontend tuner module.

Convert tda8290 module back to native tuner interface.

The tda8290 analog demodulator will be handled the same way as tda9887.
The tuner.ko module (tuner-core) will pass commands to tda8290 via the
tuner_operations interface.  tda8290 will communicate with tda827x via
the dvb_frontend interface, while passing a pointer to a private data
structure.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6431): Improve firmware format

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6430): Convert tuner-xc2028 driver to the newer hybrid approach

This changeset converts tuner-xc2028 to the newer hybrid approach. It also
prevents creating twice the xc3028 private struct by both DVB and V4L parts.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6429): Avoid having two tuner commands happening at the same time

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6428): Make the naming of the DTV firmware files more consistent

Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6427): Some cleanups at tuner-xc2028 driver

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6426): Some fixes on tuner-xc2028

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6425): Add experimental DVB frontend tuner interface to xc2028/3028

Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6424): Improve tuner-xc2028 script

Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6423): Add tuner-xc2028 driver

Add support for Xceive XC2028/XC3028 tuner driver

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6422): Add the pending entries for xc2028/3028 based boards

Also replaces all occurrences of TUNER_XCEIVE_XC3028 to TUNER_XC2028.

Some work is still may be required to make sure that non-tm6000 drivers will
be capable of using tuner-xc2028.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6421): Make Kconfig reflect the changes at audio helper modules

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6420): V4L2 conversion for tda9875 from V4L1 API

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6419): V4L2 port of tda7432 from V4L1 api

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>