Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  power_supply: Sharp SL-6000 (tosa) batteries support
  power_supply: fix up CHARGE_COUNTER output to be more precise
  power_supply: add CHARGE_COUNTER property and olpc_battery support for it
  power_supply: bump EC version check that we refuse to run with in olpc_battery
  power_supply: cleanup of the OLPC battery driver
  power_supply: add eeprom dump file to olpc_battery's sysfs
  power_supply: Support serial number in olpc_battery

Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits)
  mm/hugetlb.c must #include <asm/io.h>
  video: Fix up hp6xx driver build regressions.
  sh: defconfig updates.
  sh: Kill off stray mach-rsk7203 reference.
  serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.
  sh: Move out individual boards without mach groups.
  sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h.
  sh: Allow SH-3 and SH-5 to use common headers.
  sh: Provide common CPU headers, prune the SH-2 and SH-2A directories.
  sh/maple: clean maple bus code
  sh: More header path fixups for mach dir refactoring.
  sh: Move out the solution engine headers to arch/sh/include/mach-se/
  sh: I2C fix for AP325RXA and Migo-R
  sh: Shuffle the board directories in to mach groups.
  sh: dma-sh: Fix up dreamcast dma.h mach path.
  sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.
  sh: Add ARCH_DEFCONFIG entries for sh and sh64.
  sh: Fix compile error of Solution Engine
  sh: Proper __put_user_asm() size mismatch fix.
  sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
  ...

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  generic, x86: fix add iommu_num_pages helper function
  x86: remove stray <6> in BogoMIPS printk
  x86: move dma32_reserve_bootmem() after reserve_crashkernel()

Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] qeth: avoid use of include/asm-s390
  [S390] dont use kthread for smp_rescan_cpus().
  [S390] virtio console: fix section mismatch warning.
  [S390] cio: Include linux/string.h in schid.h.
  [S390] qdio: fix section mismatch bug.
  [S390] stp: fix section mismatch warning.
  [S390] Remove diag 0x260 call from memory detection.
  [S390] qdio: make sure qdr is aligned to page size
  [S390] Add support for memory hot-remove.
  [S390] Wire up new syscalls.
  [S390] cio: Memory allocation for idset changed.
  [S390] qeth: preallocated qeth header for hiper socket
  [S390] Optimize storage key operations for anon pages
  [S390] nohz/sclp: disable timer on synchronous waits.
  [S390] ipl: Reboot from alternate device does not work when booting from file
  [S390] dasd: Add support for enhanced VM UID
  [S390] Remove last P390 trace.

[S390] qeth: avoid use of include/asm-s390

The planned move of include/asm-s390 to arch/s390/include/asm
requires that all includes for asm headers use include/asm and
not include/asm-s390.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] dont use kthread for smp_rescan_cpus().

Since git commit 3da1c84c00c7e5fa8348336bd8c342f9128b0f14
"workqueues: make get_online_cpus() useable for work->func()"
it is safe to call get_online_cpus() from workqueue context.
So remove the kthread workaround again.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] virtio console: fix section mismatch warning.

Fix these two false positive warnings:

WARNING: vmlinux.o(.text+0x2e1cc4): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:early_put_chars()
The function s390_virtio_console_init() references
the function __init early_put_chars().
This is often because s390_virtio_console_init lacks a __init
annotation or the annotation of early_put_chars is wrong.

WARNING: vmlinux.o(.text+0x2e1cd0): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:virtio_cons_early_init()
The function s390_virtio_console_init() references
the function __init virtio_cons_early_init().
This is often because s390_virtio_console_init lacks a __init
annotation or the annotation of virtio_cons_early_init is wrong.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] cio: Include linux/string.h in schid.h.

schid.h needs string.h for memset and memcmp.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] qdio: fix section mismatch bug.

Fix the two section mismatch warnings below.
This fixes two real bugs since the code which has __exit annotations
may already be gone when it is called.

WARNING: vmlinux.o(.init.text+0x1cc4a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_setup_exit()
The function __init init_QDIO() references
a function __exit qdio_setup_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
qdio_setup_exit() so it may be used outside an exit section.

WARNING: vmlinux.o(.init.text+0x1cc7a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_remove_perf_stats()
The function __init init_QDIO() references
a function __exit qdio_remove_perf_stats().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
qdio_remove_perf_stats() so it may be used outside an exit section.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] stp: fix section mismatch warning.

Fix these two (false positive) warnings by adding an __init annoation:

WARNING: vmlinux.o(.text+0x7e6a): Section mismatch in reference from the function stp_reset() to the function .init.text:__alloc_bootmem()
The function stp_reset() references
the function __init __alloc_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of __alloc_bootmem is wrong.

WARNING: vmlinux.o(.text+0x7ece): Section mismatch in reference from the function stp_reset() to the function .init.text:free_bootmem()
The function stp_reset() references
the function __init free_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of free_bootmem is wrong.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Remove diag 0x260 call from memory detection.

The result of the diag 0x260 call is not always what one would expect.
So just remove it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] qdio: make sure qdr is aligned to page size

kzalloc does not guarantee the required alignment of qdr to page size,
use get_zeroed_page instead.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>

[S390] Add support for memory hot-remove.

This patch enables memory hot-remove on s390.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Wire up new syscalls.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] cio: Memory allocation for idset changed.

Memory allocation for the quite huge idset changed from
kzalloc to vmalloc.

Signed-off-by: Michael Ernst <mernst@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] qeth: preallocated qeth header for hiper socket

For hiper socket devices this patch will economize the reallocation
of the tx skb data segment by allocating separate memory for the qdio
transport information (qeth header).

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Optimize storage key operations for anon pages

For anonymous pages without a swap cache backing the check in
page_remove_rmap for the physical dirty bit in page_remove_rmap is
unnecessary. The instructions that are used to check and reset the dirty
bit are expensive. Removing the check noticably speeds up process exit.
In addition the clearing of the dirty bit in __SetPageUptodate is
pointless as well. With these two changes there is no storage key
operation for an anonymous page anymore if it does not hit the swap
space.

The micro benchmark which repeatedly executes an empty shell script
gets about 5% faster.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] nohz/sclp: disable timer on synchronous waits.

sclp_sync_wait wait synchronously for an sclp interrupt and disables
timer interrupts. However on the irq enter paths there is an extra
check if a timer interrupt would be due and calls the timer callback.
This would schedule softirqs in the wrong context.
So introduce local_tick_enable/disable which prevents this.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] ipl: Reboot from alternate device does not work when booting from file

During startup we check if diag308 works using diag 308 subcode 6,
which stores the actual ipl information. This fails with rc = 0x102, if
the system has been ipled from the HMC using load from CD or load from file.
In the case of rc = 0x102 we have to assume that diag 308 is working,
since it still can be used to ipl from an alternative device.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] dasd: Add support for enhanced VM UID

When z/VM provides two virtual devices (minidisks) that reside on the
same real device, both will receive the configuration data from the
real device and thus get the same uid. To fix this problem, z/VM
provides an additional configuration data record that allows to
distinguish between minidisks.
z/VM APAR VM64273 needs be installed so this fix has an effect.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Remove last P390 trace.

Seems like I forgot this hunk...

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Cobalt: update defconfig
  [MIPS] kgdb: add arch support for the kernel's kgdb core
  [MIPS] kgdb: Remove existing implementation
  [MIPS] TXx9: Kconfig cleanup
  [MIPS] TXx9: Kill unused txx927.h
  [MIPS] TXx9: Support early_printk
  [MIPS] TXx9: Unify serial_txx9 setup
  [MIPS] TXx9: Random cleanup
  [MIPS] TXx9: Make tx4938-specific code more independent
  [MIPS] TXx9: Make tx3927-specific code more independent
  [MIPS] TXx9: Cleanup watchdog
  [MIPS] TXx9: Cleanup restart/halt/power_off
  [MIPS] TXx9: PCI error handling
  [MIPS] TXx9: Add some pci options
  [MIPS] Introduce pcibios_plat_setup
  [MIPS] TXx9: PCI fixes for tx3927/tx4927
  [MIPS] TXx9: Fix JMR3927 irq numbers
  [MIPS] RB532: Flags are unsigned long
  [MIPS] Initialization of Alchemy boards
  [MIPS] tlb-r4k: Nuke broken paranoia error test.

Fix off-by-one error in iov_iter_advance()

The iov_iter_advance() function would look at the iov->iov_len entry
even though it might have iterated over the whole array, and iov was
pointing past the end.  This would cause DEBUG_PAGEALLOC to trigger a
kernel page fault if the allocation was at the end of a page, and the
next page was unallocated.

The quick fix is to just change the order of the tests: check that there
is any iovec data left before we check the iov entry itself.

Thanks to Alexey Dobriyan for finding this case, and testing the fix.

Reported-and-tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

romfs_readpage: don't report errors for pages beyond i_size

We zero-fill them like we are supposed to, and that's all fine.  It's
only an error if the 'romfs_copyfrom()' routine isn't able to fill the
data that is supposed to be there.

Most of the patch is really just re-organizing the code a bit, and using
separate variables for the error value and for how much of the page we
actually filled from the filesystem.

Reported-and-tested-by: Chris Fester <cfester@wms.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Matt Waddel <matt.waddel@freescale.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>

[MIPS] Cobalt: update defconfig

Select new LCD framebuffer driver.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] kgdb: add arch support for the kernel's kgdb core

The new kgdb architecture specific handler registers and unregisters
dynamically for exceptions depending on when you configure a kgdb I/O
driver.

Aside from initializing the exceptions earlier in the boot process,
kgdb should have no impact on a device when it is compiled in so long
as an I/O module is not configured for use.

There have been quite a number of contributors during the existence of
this patch (see arch/mips/kernel/kgdb.c).  Most recently Jason
re-wrote the mips kgdb logic to use the die notification handlers.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] kgdb: Remove existing implementation

This patch explicitly removes the kgdb implementation, for mips which
is intended to be followed by a patch that adds a kgdb implementation
for MIPS that makes use of the kgdb core in the kernel.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Kconfig cleanup

Unify some entries in txx9/Kconfig.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Kill unused txx927.h

include/asm-mips/txx9/txx927.h is no longer used.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Support early_printk

Kill jmr3927-specific prom_putchar and add txx9-generic prom_putchar
to support early_printk.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Unify serial_txx9 setup

* Unify calling of early_serial_txx9_setup.
* Use dedicated serial clock on RBTX4938.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Random cleanup

* Random cleanups spotted by checkpatch script.
* Do not initialize panic_timeout.  "panic=" kernel parameter can be used.
* Do not add "ip=any" or "ip=bootp".  This options is not board specific.
* Do not add "root=/dev/nfs".  This is default on CONFIG_ROOT_NFS.
* Kill unused error checking.
* Fix IRQ comment to match current code.
* Kill some unneeded includes
* ST0_ERL is already cleared in generic code.
* conswitchp is initialized generic code.
* __init is not needed in prototype.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Make tx4938-specific code more independent

Make some TX4938 SoC specific code independent from board specific code.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Make tx3927-specific code more independent

Make some TX3927 SoC specific code independent from board specific code.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Cleanup watchdog

Unify registration of txx9wdt platform device.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Cleanup restart/halt/power_off

Unify machine_restart/machine_halt/pm_power_off and add fallback
machine_halt routine.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: PCI error handling

From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Thu, 24 Jul 2008 00:25:16 +0900
Subject: [PATCH] txx9: PCI error handling

Add more control and detailed report on PCI error interrupt.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Add some pci options

Add pci options for backplane type, clock selection, error handling,
timeout values.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Introduce pcibios_plat_setup

Introduce pcibios_plat_setup for platform-specific pcibios_setup.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: PCI fixes for tx3927/tx4927

* Fix tx3927 pci ops for Type-1 configuration
* Fix abort checking of tx3927 pci ops
* Flush write buffer to avoid spurious PCI error interrupt
* Add a quirk for FPCIB backplane

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TXx9: Fix JMR3927 irq numbers

* Fix wrong txx9_clockevent interrupt number
* Fix TXX9_IRQ_BASE for JMR3927+FPCIB case

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] RB532: Flags are unsigned long

A recent generic change now catches such bugs:

<--  snip  -->

...
  CC      arch/mips/rb532/time.o
cc1: warnings being treated as errors
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c: In function 'plat_time_init':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c:55: error: comparison of distinct pointer types lacks a cast
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c:66: error: comparison of distinct pointer types lacks a cast
make[2]: *** [arch/mips/rb532/time.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Initialization of Alchemy boards

An earlier update changed some calls from simple_strotl to strict_strtol but
did not account for the differences in the syntax between the calls.
simple_strotl returns the integer; strict_strtol returns an error code and
takes a pointer to the result.  As it was, NULL was being passed in place of
the result, which led to failures during kernel initialization when using
YAMON.

Signed-off-by: Kevin Hickey <khickey@rmicorp.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] tlb-r4k: Nuke broken paranoia error test.

Bug originally found and reported by Julia Lawall <julia@diku.dk>.  I
decieded that the whole error check was mostly useless paranoia and should
be discarded.  It would only ever trigger if r3k_have_wired_reg has a wrong
value.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/mm: Lockless get_user_pages_fast() for 64-bit (v3)
  powerpc: Don't use the wrong thread_struct for ptrace get/set VSX regs
  powerpc: Fix ptrace buffer size for VSX
  powerpc: Correctly hookup PTRACE_GET/SETVSRREGS for 32 bit processes
  ide/powermac: Fix use of uninitialized pointer on media-bay
  powerpc: Allow non-hcall return values for lparcfg writes
  ipmi/powerpc: Use linux/of_{device,platform}.h instead of asm
  powerpc/fsl: proliferate simple-bus compatibility to soc nodes
  Documentation: remove old sbc8260 board specific information
  cpm2: Rework baud rate generators configuration to support external clocks.
  powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC
  cpm_uart: Add generic clock API support to set baudrates
  cpm_uart: Modem control lines support
  powerpc: implement GPIO LIB API on CPM1 Freescale SoC.
  cpm2: Implement GPIO LIB API on CPM2 Freescale SoC.
  powerpc: Fix 8xx build failure
  powerpc: clean up the Book-E HW watchpoint support

cpumask: statement expressions confuse some versions of gcc

when you take the address of the result.  Noticed on a sparc64 compile
using a version 3.4.5 cross compiler.

 kernel/time/tick-common.c: In function `tick_check_new_device':
 kernel/time/tick-common.c:210: error: invalid lvalue in unary `&'
 ...

Just make it a regular expression.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  net: Make "networking" one-click deselectable.
  ipv6: Fix useless proc net sockstat6 removal
  tcp: MD5: Use MIB counter instead of warning for MD5 mismatch.
  pkt_sched: Fix OOPS on ingress qdisc add.
  niu: Fix error checking in niu_ethflow_to_class.
  IPv6: datagram_send_ctl() should exit immediately when an error occured
  mac80211: fix mesh beaconing
  PS3: gelic: use unsigned long for irqflags
  mac80211: fix cfg80211 hooks for master interface
  nl80211: fix dump callbacks
  mac80211: partially fix skb->cb use
  rtl8187: Improve wireless statistics for RTL8187B
  rtl8187: Fix for TX sequence number problem
  mac80211: append CONFIG_ to MAC80211_VERBOSE_PS_DEBUG in net/mac80211/tx.c.
  mac80211: fix sparse integer as NULL pointer warning
  drivers/net/wireless/iwlwifi/iwl-led.c: printk fix
  mac80211: return correct error return from ieee80211_wep_init
  mac80211: tx, use dev_kfree_skb_any for beacon_get
  rt2x00: Clear queue entry flags during initialization
  rt2x00: Force full register config after start()
  ...

x86: wrong register was used in align macro

New ALIGN_DESTINATION macro has sad typo: r8d register was used instead
of ecx in fixup section. This can be considered as a regression.

Register ecx was also wrongly loaded with value in r8d in
copy_user_nocache routine.

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: setup the notify GRU message queue

Setup the notify GRU message queue that is used for sending user messages
on UV systems.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: setup the activate GRU message queue

Setup the activate GRU message queue that is used for partition activation
and channel connection on UV systems.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: cleanup naming of partition defines

Cleanup naming of partition defines.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: move xpc_check_remote_hb() to support both SN2 and UV

Move xpc_check_remote_hb() so it can support both SN2 and UV.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: add usage of GRU driver by xpc_remote_memcpy()

Add UV support to xpc_remote_memcpy(), which involves interfacing to the
GRU driver.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: enable building of XPC/XPNET on x86_64

Get XPC/XPNET to build on x86_64.  Trying to modprobe them up on a non-UV
or sn2 system will result in a -ENODEV.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: add 'jiffies' to reserved page's timestamp name

Rename XPC's reserved page's timestamp member to reflect the units of time
involved.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: use standard bitops macros and functions

Change sgi-xp to use the standard bitops macros and functions instead of
trying to invent its own mechanism.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: eliminate '>>>' in comments

Comments in /drivers/misc/sgi-xp has been using '>>>' as a means to draw
attention to something that needs to be done or considered.  To avoid
colliding with git rejects, '>>>' will now be replaced by '!!!' to
indicate something to do, and by '???' to indicate something to be
considered.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: add _sn2 suffix to a few variables

Add an '_sn2' suffix to some variables found in xpc_sn2.c.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate remote copy buffer to sn2 only

Make the remote copy buffer an sn2 only item.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: enable XPNET to handle more than 64 partitions

Enable XPNET to support more than 64 partitions.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate allocation of XPC's msgqueues to sn2 only

Move the allocation of XPC's msgqueues to xpc_sn2.c.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: replace AMO_t typedef by struct amo

Replace the AMO_t typedef by a direct reference to 'struct amo'.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: separate chctl_flags from XPC's notify IRQ

Tie current IPI references to either XPC's notify IRQ or channel control
flags.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate additional sn2 specific code

Move additional sn2 specific code into xpc_sn2.c.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate activate IRQ's hardware specific components

Isolate architecture specific code related to XPC's activate IRQ.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: move xpc_allocate() into xpc_send()/xpc_send_notify()

Move xpc_allocate() functionality into xpc_send()/xpc_send_notify() so
xpc_allocate() no longer needs to be called by XPNET.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: base xpc_rsvd_page's timestamp on jiffies

Change XPC's reserved page timestamp to be based on jiffies.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate xpc_vars structure to sn2 only

Isolate the xpc_vars structure of XPC's reserved page to sn2 only.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate xpc_vars_part structure to sn2 only

Isolate the xpc_vars_part structure of XPC's reserved page to sn2 only.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: prepare xpc_rsvd_page to work on either sn2 or uv hardware

Prepare XPC's reserved page header to work for either sn2 or uv.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: create a common xp_remote_memcpy() function

Create a common remote memcpy function that maps to what the hardware
booted supports.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: support runtime selection of xp_max_npartitions

Support runtime selection of the max number of partitions based on the
hardware being run on.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: define BYTES_PER_WORD

Add a BYTES_PER_WORD #define.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: define xpSalError reason code

Define xpSalError reason code.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: define is_shub() and is_uv() macros

Define the is_shub()/is_uv() macros if they've not already been defined.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver V3: fixes to resolve code review comments

Fixes problems identified in a code review:
- add comment with high level dscription of the GRU
- prepend "gru_" to all global names
- delete unused function
- couple of trivial bug fixes

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: driver/misc Makefile & Kconfig changes

Driver/misc changes for the GRU driver

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: export is_uv_system(), zap_page_range() & follow_page()

Exports needed by the GRU driver.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: driver makefile

This patch adds the GRU driver makefile

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: TLB flushing, MMUOPS callouts

This file contains the functions for handlinf GRU TLB flushing, This
includes functions to handle the MMUOPS callouts.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: /proc interfaces

This file externalizes some GRU state & statistics to the user using the
/proc file system.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: resource management

This file contains functions realted to managing GRU resources provided to
the user.  Examples include GRU context assignment, load, unload,
migration, etc..

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: kernel services provide by driver

This file contains functions for handling services provided to other
kernel modules that use the GRU.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: page faults & exceptions

This file contains the functions that manage GRU page faults and
exceptions.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: driver initialization, file & vma ops

This file contains the functions for initializing the driver, handling
file & vma operations and for processing IOCTL requests from the user.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: kernel services header files

This patch contains the header file used to export GRU services to other
kernel drivers such as XPMEM or XPNET.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: driver internal header files

This patch contains header files internal to the GRU driver.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: GRU instructions & macros

This patchs contains macros & inline functions used to issue instructions
to the GRU.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: hardware data structures

This series of patches adds a driver for the SGI UV GRU.  The driver is
still in development but it currently compiles for both x86_64 & IA64.
All simple regression tests pass on IA64.  Although features remain to be
added, I'd like to start the process of getting the driver into the
kernel.  Additional kernel drivers will depend on services provide by the
GRU driver.

The GRU is a hardware resource located in the system chipset.  The GRU
contains memory that is mmaped into the user address space.  This memory
is used to communicate with the GRU to perform functions such as
load/store, scatter/gather, bcopy, AMOs, etc.  The GRU is directly
accessed by user instructions using user virtual addresses.  GRU
instructions (ex., bcopy) use user virtual addresses for operands.

The GRU contains a large TLB that is functionally very similar to
processor TLBs.  Because the external contains a TLB with user virtual
address, it requires callouts from the core VM system when certain types
of changes are made to the process page tables.  There are several MMUOPS
patches currently being discussed but none has been accepted into the
kernel.  The GRU driver is built using version V18 from Andrea Arcangeli.

This patch:

Contains the definitions of the hardware GRU data structures that are used
by the driver to manage the GRU.

[akpm@linux-foundation;org: export hpage_shift]
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add zap_vma_ptes(): a library function to unmap driver ptes

zap_vma_ptes() is intended to be used by drivers to unmap ptes assigned to the
driver private vmas.  This interface is similar to zap_page_range() but is
less general & less likely to be abused.

Needed by the GRU driver.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sched: make scheduler sysfs attributes sysdev class devices

They are really class devices, but were incorrectly declared.  This
leads to crashes with the recent changes that makes non normal sysdevs
use a different prototype.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-dev: stop periodic interrupts on device release

Solves http://bugzilla.kernel.org/show_bug.cgi?id=11127

The old rtc.c driver did it and some drivers (like rtc-sh) do it in their
release function, though they should not -- because they should provide
the irq_set_state op and the rtc framework itself should care about it.
This patch makes it do so.

I am aware that some drivers, like rtc-sh, handle userspace PIE sets in
their ioctl op (instead of having the framework call the op), exporting
the irq_set_state op at the same time.  The logic in rtc_irq_set_state
should make sure it doesn't matter and the driver should not need to care
stopping periodic interrupts in its release routine any more.

The correct way, in my opinion, should be this:
1) The driver provides the irq_set_state op and does not care closing the
   interrupts in its release op.
2) If the driver does not provide the op and handles PIE in the ioctl op, it's
   reponsible for closing them in its release op.
3) Something similar for other IRQs, like UIE -- if there's no in-kernel API
   like irq_set_state, handle it in ioctl and release ops. The framework will
   be responsible either for everything or for nothing. (This will probably
   change later.)

Signed-off-by: Tomas Janousek <tomi@nomi.cz>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gbefb: cmap FIFO timeout

Writes to the cmap fifo while the display is blanked caused cmap FIFO
timeout messages and a wrong colormap.  To avoid this the driver now
maintains a colormap in memory and updates the colormap after the display
is unblanked.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

workqueues: add comments to __create_workqueue_key()

Dmitry Adamushko pointed out that the error handling in
__create_workqueue_key() is not clear, add the comment.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/buffer.c: uninline __remove_assoc_queue()

Uninline the __remove_assoc_queue() function in fs/buffer.c, called at too
many places and too long to really be inlined.  Size results:

   text    data     bss     dec     hex filename
1134606  118840  212992 1466438  166046 vmlinux.old
1134303  118840  212992 1466135  165f17 vmlinux
   -303       0       0    -303    -12F +/-

This patch is part of the Linux Tiny project and has been originally
written by Matt Mackall <mpm@selenic.com>.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omfs: sparse annotations

Missing cpu_to_be64 on some constant assignments.
fs/omfs/dir.c:107:16: warning: incorrect type in assignment (different base types)
fs/omfs/dir.c:107:16:    expected restricted __be64 [usertype] i_sibling
fs/omfs/dir.c:107:16:    got unsigned long long
fs/omfs/file.c:33:13: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:33:13:    expected restricted __be64 [usertype] e_next
fs/omfs/file.c:33:13:    got unsigned long long
fs/omfs/file.c:36:24: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:36:24:    expected restricted __be64 [usertype] e_cluster
fs/omfs/file.c:36:24:    got unsigned long long
fs/omfs/file.c:37:23: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:37:23:    expected restricted __be64 [usertype] e_blocks
fs/omfs/file.c:37:23:    got unsigned long long

fs/omfs/bitmap.c:74:18: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:74:18:    expected unsigned long volatile *addr
fs/omfs/bitmap.c:74:18:    got long *<noident>
fs/omfs/bitmap.c:77:20: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:77:20:    expected unsigned long volatile *addr
fs/omfs/bitmap.c:77:20:    got long *<noident>
fs/omfs/bitmap.c:112:17: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:112:17:    expected unsigned long volatile *addr
fs/omfs/bitmap.c:112:17:    got long *<noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/mod/modpost.c: fix spelling of module and happens

Spelling fixes in scripts/mod/modpost.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove drivers/serial/v850e_uart.c

The removal of drivers/serial/v850e_uart.c originally was in my v850
removal patch, but it seems it got lost somewhere.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

USB: m66592-udc: Fix up dev_set_name() badness.

Commit 0031a06e2f07ab0d1bc98c31dbb6801f95f4bf01 converted all of the USB
drivers to use dev_set_name(), though there was a typo on the m66592-udc
conversion that handed off the wrong pointer (we want the struct device
here obviously, not the struct usb_gadget).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

introduce lower_32_bits() macro

The file kernel.h contains the upper_32_bits macro.  This patch adds the
other part, the lower_32_bits macro.  Its first use will be in the driver
for AMD IOMMU.

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>