fs/ubifs: use rbtree postorder iteration helper instead of opencoding

Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net/netfilter/ipset/ip_set_hash_netiface.c: use rbtree postorder iteration instead of opencoding

Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rbtree/test: test rbtree_postorder_for_each_entry_safe()

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rbtree/test: move rb_node to the middle of the test struct

Avoid making the rb_node the first entry to catch some bugs around NULL
checking the rb_node.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio: add modular rapidio core build into powerpc and mips branches

Allow modular build option for RapidIO subsystem core in MIPS and PowerPC
architectural branches.

At this moment modular RapidIO subsystem build is enabled only for
platforms that use PCI/PCIe based RapidIO controllers (e.g.  Tsi721).

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: complete documentation of gpt kernel param purpose

The usage of the 'gpt' kernel parameter is twofold: (i) skip any mbr
integrity checks and (ii) enable the backup GPT header to be used in
situations where the primary one is corrupted.  This last "feature" is not
obvious and needs to be properly documented in the kernel-parameters
document.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=63591

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: "Chandramouleeswaran,Aswin" <aswin@hp.com>
Cc: Chris Murphy <bugzilla@colorremedies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kdump: add /sys/kernel/vmcoreinfo ABI documentation

/sys/kernel/vmcoreinfo was introduced long back but there is no ABI
documentation.  This patch adds the documentation.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Cc: Dan Aloni <da-x@monatomic.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kdump: fix exported size of vmcoreinfo note

Right now we seem to be exporting the max data size contained inside
vmcoreinfo note.  But this does not include the size of meta data around
vmcore info data.  Like name of the note and starting and ending elf_note.

I think user space expects total size and that size is put in PT_NOTE elf
header.  Things seem to be fine so far because we are not using vmcoreinfo
note to the maximum capacity.  But as it starts filling up, to capacity,
at some point of time, problem will be visible.

I don't think user space will be broken with this change.  So there is no
need to introduce vmcoreinfo2.  This change is safe and backward
compatible.  More explanation on why this change is safe is below.

vmcoreinfo contains information about kernel which user space needs to
know to do things like filtering.  For example, various kernel config
options or information about size or offset of some data structures etc.
All this information is commmunicated to user space with an ELF note
present in ELF /proc/vmcore file.

Currently vmcoreinfo data size is 4096.  With some elf note meta data
around it, actual size is 4132 bytes.  But we are using barely 25% of that
size.  Rest is empty.  So even if we tell user space that size of ELf note
is 4096 and not 4132, nothing will be broken becase after around 1000
bytes, everything is zero anyway.

But once we start filling up the note to the capacity, and not report the
full size of note, bad things will start happening.  Either some data will
be lost or tools will be confused that they did not fine the zero note at
the end.

So I think this change is safe and should not break existing tools.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Cc: Dan Aloni <da-x@monatomic.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kexec: add sysctl to disable kexec_load

For general-purpose (i.e.  distro) kernel builds it makes sense to build
with CONFIG_KEXEC to allow end users to choose what kind of things they
want to do with kexec.  However, in the face of trying to lock down a
system with such a kernel, there needs to be a way to disable kexec_load
(much like module loading can be disabled).  Without this, it is too easy
for the root user to modify kernel memory even when CONFIG_STRICT_DEVMEM
and modules_disabled are set.  With this change, it is still possible to
load an image for use later, then disable kexec_load so the image (or lack
of image) can't be altered.

The intention is for using this in environments where "perfect"
enforcement is hard.  Without a verified boot, along with verified
modules, and along with verified kexec, this is trying to give a system a
better chance to defend itself (or at least grow the window of
discoverability) against attack in the face of a privilege escalation.

In my mind, I consider several boot scenarios:

1) Verified boot of read-only verified root fs loading fd-based
   verification of kexec images.
2) Secure boot of writable root fs loading signed kexec images.
3) Regular boot loading kexec (e.g. kcrash) image early and locking it.
4) Regular boot with no control of kexec image at all.

1 and 2 don't exist yet, but will soon once the verified kexec series has
landed.  4 is the state of things now.  The gap between 2 and 4 is too
large, so this change creates scenario 3, a middle-ground above 4 when 2
and 1 are not possible for a system.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/exec.c: call arch_pick_mmap_layout() only once

Currently both setup_new_exec() and flush_old_exec() issue a call to
arch_pick_mmap_layout().  As setup_new_exec() and flush_old_exec() are
always called pairwise arch_pick_mmap_layout() is called twice.

This patch removes one call from setup_new_exec() to have it only called
once.

Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Pat Erley <pat-lkml@erley.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: avoid propagating PF_NO_SETAFFINITY into userspace child

Userspace process doesn't want the PF_NO_SETAFFINITY, but its parent may be
a kernel worker thread which has PF_NO_SETAFFINITY set, and this worker thread
can do kernel_thread() to create the child.
Clearing this flag in usersapce child to enable its migrating capability.

Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/signal.c: change do_signal_stop/do_sigaction to use while_each_thread()

Change do_signal_stop() and do_sigaction() to avoid next_thread() and use
while_each_thread() instead.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sys.c: k_getrusage() can use while_each_thread()

Change k_getrusage() to use while_each_thread(), no changes in the
compiled code.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/array.c: change do_task_stat() to use while_each_thread()

Change the remaining next_thread (ab)users to use while_each_thread().

The last user which should be changed is next_tid(), but we can't do this
now.

__exit_signal() and complete_signal() are fine, they actually need
next_thread() logic.

This patch (of 3):

do_task_stat() can use while_each_thread(), no changes in
the compiled code.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: kill task_struct->did_exec

We can kill either task->did_exec or PF_FORKNOEXEC, they are mutually
exclusive.  The patch kills ->did_exec because it has a single user.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: move the final allow_write_access/fput into free_bprm()

Both success/failure paths cleanup bprm->file, we can move this
code into free_bprm() to simlify and cleanup this logic.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec:check_unsafe_exec: kill the dead -EAGAIN and clear_in_exec logic

fs_struct->in_exec == T means that this ->fs is used by a single process
(thread group), and one of the treads does do_execve().

To avoid the mt-exec races this code has the following complications:

1. check_unsafe_exec() returns -EBUSY if ->in_exec was
   already set by another thread.

2. do_execve_common() records "clear_in_exec" to ensure
   that the error path can only clear ->in_exec if it was
   set by current.

However, after 9b1bf12d5d51 "signals: move cred_guard_mutex from
task_struct to signal_struct" we do not need these complications:

1. We can't race with our sub-thread, this is called under
   per-process ->cred_guard_mutex. And we can't race with
   another CLONE_FS task, we already checked that this fs
   is not shared.

   We can remove the  dead -EAGAIN logic.

2. "out_unmark:" in do_execve_common() is either called
   under ->cred_guard_mutex, or after de_thread() which
   kills other threads, so we can't race with sub-thread
   which could set ->in_exec. And if ->fs is shared with
   another process ->in_exec should be false anyway.

   We can clear in_exec unconditionally.

This also means that check_unsafe_exec() can be void.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec:check_unsafe_exec: use while_each_thread() rather than next_thread()

next_thread() should be avoided, change check_unsafe_exec() to use
while_each_thread().

Nobody except signal->curr_target actually needs next_thread-like code,
and we need to change (fix) this interface.  This particular code is fine,
p == current.  But in general the code like this can loop forever if p
exits and next_thread(t) can't reach the unhashed thread.

This also saves 32 bytes.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/fork.c: remove redundant NULL check in dup_mm()

current->mm doesn't need a NULL check in dup_mm().  Becasue dup_mm() is
used only in copy_mm() and current->mm is checked whether it is NULL or
not in copy_mm() before calling dup_mm().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/fork.c: fix coding style issues

Fix errors reported by checkpatch.pl.  One error is parentheses, the other
is a whitespace issue.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/fork.c: make dup_mm() static

dup_mm() is used only in kernel/fork.c

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc: don't use module_init for non-modular core code

PROC_FS is a bool, so this code is either present or absent.  It will
never be modular, so using module_init as an alias for __initcall is
rather misleading.

Fix this up now, so that we can relocate module_init from init.h into
module.h in the future.  If we don't do this, we'd have to add module.h to
obviously non-modular code, and that would be ugly at best.

Note that direct use of __initcall is discouraged, vs.  one of the
priority categorized subgroups.  As __initcall gets mapped onto
device_initcall, our use of fs_initcall (which makes sense for fs code)
will thus change these registrations from level 6-device to level 5-fs
(i.e.  slightly earlier).  However no observable impact of that small
difference has been observed during testing, or is expected.

Also note that this change uncovers a missing semicolon bug in the
registration of vmcore_init as an initcall.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc_namespace.c: simplify testing nsp and nsp->mnt_ns

Trivial cleanup to eliminate a goto.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/proc_devtree.c: remove empty /proc/device-tree when no openfirmware exists.

Distribution kernels might want to build in support for /proc/device-tree
for kernels that might end up running on hardware that doesn't support
openfirmware.  This results in an empty /proc/device-tree existing.
Remove it if the OFW root node doesn't exist.

This situation actually confuses grub2, resulting in install failures.
grub2 sees the /proc/device-tree and picks the wrong install target cf.
http://bzr.savannah.gnu.org/lh/grub/trunk/grub/annotate/4300/util/grub-install.in#L311
grub should be more robust, but still, leaving an empty proc dir seems
pointless.

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=818378.

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: set attributes of pde using accessor functions

Use existing accessors proc_set_user() and proc_set_size() to set
attributes.  Just a cleanup.

Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: fix ->f_pos overflows in first_tid()

1. proc_task_readdir()->first_tid() path truncates f_pos to int, this
   is wrong even on 64bit.

   We could check that f_pos < PID_MAX or even INT_MAX in
   proc_task_readdir(), but this patch simply checks the potential
   overflow in first_tid(), this check is nop on 64bit.  We do not care if
   it was negative and the new unsigned value is huge, all we need to
   ensure is that we never wrongly return !NULL.

2. Remove the 2nd "nr != 0" check before get_nr_threads(),
   nr_threads == 0 is not distinguishable from !pid_task() above.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sameer Nanda <snanda@chromium.org>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: don't (ab)use ->group_leader in proc_task_readdir() paths

proc_task_readdir() does not really need "leader", first_tid() has to
revalidate it anyway.  Just pass proc_pid(inode) to first_tid() instead,
it can do pid_task(PIDTYPE_PID) itself and read ->group_leader only if
necessary.

The patch also extracts the "inode is dead" code from
pid_delete_dentry(dentry) into the new trivial helper,
proc_inode_is_dead(inode), proc_task_readdir() uses it to return -ENOENT
if this dir was removed.

This is a bit racy, but the race is very inlikely and the getdents() after
openndir() can see the empty "." + ".." dir only once.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sameer Nanda <snanda@chromium.org>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: change first_tid() to use while_each_thread() rather than next_thread()

Rerwrite the main loop to use while_each_thread() instead of
next_thread().  We are going to fix or replace while_each_thread(),
next_thread() should be avoided whenever possible.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sameer Nanda <snanda@chromium.org>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: fix the potential use-after-free in first_tid()

proc_task_readdir() verifies that the result of get_proc_task() is
pid_alive() and thus its ->group_leader is fine too.  However this is not
necessarily true after rcu_read_unlock(), we need to recheck this again
after first_tid() does rcu_read_lock().  Otherwise
leader->thread_group.next (used by next_thread()) can be invalid if the
rcu grace period expires in between.

The race is subtle and unlikely, but still it is possible afaics.  To
simplify lets ignore the "likely" case when tid != 0, f_version can be
cleared by proc_task_operations->llseek().

Suppose we have a main thread M and its subthread T.  Suppose that f_pos
== 3, iow first_tid() should return T.  Now suppose that the following
happens between rcu_read_unlock() and rcu_read_lock():

1. T execs and becomes the new leader. This removes M from
    ->thread_group but next_thread(M) is still T.

2. T creates another thread X which does exec as well, T
   goes away.

3. X creates another subthread, this increments nr_threads.

4. first_tid() does next_thread(M) and returns the already
   dead T.

Note also that we need 2.  and 3.  only because of get_nr_threads() check,
and this check was supposed to be optimization only.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sameer Nanda <snanda@chromium.org>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: cleanup/simplify get_task_state/task_state_array

get_task_state() and task_state_array[] look confusing and suboptimal, it
is not clear what it can actually report to user-space and
task_state_array[] blows .data for no reason.

1. state = (tsk->state & TASK_REPORT) | tsk->exit_state is not
   clear. TASK_REPORT is self-documenting but it is not clear
   what ->exit_state can add.

   Move the potential exit_state's (EXIT_ZOMBIE and EXIT_DEAD)
   into TASK_REPORT and use it to calculate the final result.

2. With the change above it is obvious that task_state_array[]
   has the unused entries just to make BUILD_BUG_ON() happy.

   Change this BUILD_BUG_ON() to use TASK_REPORT rather than
   TASK_STATE_MAX and shrink task_state_array[].

3. Turn the "while (state)" loop into fls(state).

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump: make __get_dumpable/get_dumpable inline, kill fs/coredump.h

1. Remove fs/coredump.h. It is not clear why do we need it,
   it only declares __get_dumpable(), signal.c includes it
   for no reason.

2. Now that get_dumpable() and __get_dumpable() are really
   trivial make them inline in linux/sched.h.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump: kill MMF_DUMPABLE and MMF_DUMP_SECURELY

Nobody actually needs MMF_DUMPABLE/MMF_DUMP_SECURELY, they are only used
to enforce the encoding of SUID_DUMP_* enum in mm->flags &
MMF_DUMPABLE_MASK.

Now that set_dumpable() updates both bits atomically we can kill them and
simply store the value "as is" in 2 lower bits.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump: set_dumpable: fix the theoretical race with itself

set_dumpable() updates MMF_DUMPABLE_MASK in a non-trivial way to ensure
that get_dumpable() can't observe the intermediate state, but this all
can't help if multiple threads call set_dumpable() at the same time.

And in theory commit_creds()->set_dumpable(SUID_DUMP_ROOT) racing with
sys_prctl()->set_dumpable(SUID_DUMP_DISABLE) can result in SUID_DUMP_USER.

Change this code to update both bits atomically via cmpxchg().

Note: this assumes that it is safe to mix bitops and cmpxchg.  IOW, if,
say, an architecture implements cmpxchg() using the locking (like
arch/parisc/lib/bitops.c does), then it should use the same locks for
set_bit/etc.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/cpu-hotplug.txt: fix a typo in example code

As the notifier_block name (i.e.  foobar_cpu_notifer) is different from
the parameter (i.e.foobar_cpu_notifier) of register function, that is
definitely error and it also makes readers confused.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kconfig: update flightly outdated CONFIG_SMP documentation

Remove an outdated reference to "most personal computers" having only one
CPU, and change the use of "singleprocessor" and "single processor" in
CONFIG_SMP's documentation to "uniprocessor" across all arches where that
documentation is present.

Signed-off-by: Robert Graffham <psquid@psquid.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/filesystems/00-INDEX: updates

Add the following documentation-files with description :
 -autofs4-mount-control.txt
 -btrfs.txt
 -debugfs.txt
 -devpts.txt
 -fiemap.txt
 -gfs2-glocks.txt
 -gfs2-uevents.txt
 -omfs.txt
 -path-lookup.txt
 -qnx6.txt
 -quota.txt
 -squashfs.txt
 -sysfs-tagging.txt
 -ubifs.txt
 -xfs-delayed-logging-design.txt
 -xfs-self-describing-metadata.txt

Add the following documentation directories with description :
 -caching
 -cifs (replacing cifs.txt)
 -pohmelfs

Remove the following documentation-files reference:
 -dentry-locking.txt
 -reiser4.txt

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/blockdev/ramdisk.txt: updates

- ramdisk_blocksize doesn't exist anymore

- Module parameters added to documentation

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/filesystems/sysfs.txt: fix device_attribute declaration

Fix a wrong device_attribute declaration example.

Signed-off-by: Andre Richter <andre.o.richter@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: remove hfsplus_file_lookup()

HFS+ resource fork lookup breaks opendir() library function.  Since
opendir first calls open() with O_DIRECTORY flag set.  O_DIRECTORY means
"refuse to open if not a directory".  The open system call in the kernel
does a check for inode->i_op->lookup and returns -ENOTDIR.  So if
hfsplus_file_lookup is set it allows opendir() for plain files.

Also resource fork lookup in HFS+ does not work.  Since it is never
invoked after VFS permission checking.  It will always return with
-EACCES.

When we call opendir() on a file, it does not return NULL.  opendir()
library call is based on open with O_DIRECTORY flag passed and then
layered on top of getdents() system call.  O_DIRECTORY means "refuse to
open if not a directory".

The open() system call in the kernel does a check for: do_sys_open()
-->..--> can_lookup() i.e it only checks inode->i_op->lookup and returns
ENOTDIR if this function pointer is not set.

In OSX, we can open "file/rsrc" to get the resource fork of "file".  This
behavior is emulated inside hfsplus on Linux, which means that to some
degree every file acts like a directory.  That is the reason lookup()
inode operations is supported for files, and it is possible to do a lookup
on this specific name.  As a result of this open succeeds without
returning ENOTDIR for HFS+

Please see the LKML discussion thread on this issue:
http://marc.info/?l=linux-fsdevel&m=122823343730412&w=2

I tried to test file/rsrc lookup in HFS+ driver and the feature does not
work.  From OSX:

$ touch test
$ echo "1234" > test/..namedfork/rsrc
$ ls -l test..namedfork/rsrc
--rw-r--r-- 1 tuxera staff 5 10 dec 12:59 test/..namedfork/rsrc

[sougata@ultrabook tmp]$ id
uid=1000(sougata) gid=1000(sougata) groups=1000(sougata),5(tty),18(dialout),1001(vboxusers)

[sougata@ultrabook tmp]$ mount
/dev/sdb1 on /mnt/tmp type hfsplus (rw,relatime,umask=0,uid=1000,gid=1000,nls=utf8)

[sougata@ultrabook tmp]$ ls -l test/rsrc
ls: cannot access test/rsrc: Permission denied

According to this LKML thread it is expected behavior.

http://marc.info/?t=121139033800008&r=1&w=4

I guess now that permission checking happens in vfs generic_permission() ?
 So it turns out that even though the lookup() inode_operation exists for
HFS+ files.  It cannot really get invoked ?.  So if we can disable this
feature to make opendir() work for HFS+.

Signed-off-by: Sougata Santra <sougata@tuxera.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Anton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nilfs2: add comments for ioctls

Add comments for ioctls in fs/nilfs2/ioctl.c file and describe NILFS2
specific ioctls in Documentation/filesystems/nilfs2.txt.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Wenliang Fan <fanwlexca@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/nilfs2: fix integer overflow in nilfs_ioctl_wrap_copy()

The local variable 'pos' in nilfs_ioctl_wrap_copy function can overflow if
a large number was passed to argv->v_index from userspace and the sum of
argv->v_index and argv->v_nmembs exceeds the maximum value of __u64 type
integer (= ~(__u64)0 = 18446744073709551615).

Here, argv->v_index is a 64-bit width argument to specify the start
position of target data items (such as segment number, checkpoint number,
or virtual block address of nilfs), and argv->v_nmembs gives the total
number of the items that userland programs (such as lssu, lscp, or
cleanerd) want to get information about, which also gives the maximum
element count of argv->v_base[] array.

nilfs_ioctl_wrap_copy() calls dofunc() repeatedly and increments the
position variable 'pos' at the end of each iteration if dofunc() itself
didn't update 'pos':

      if (pos == ppos)
              pos += n;

This patch prevents the overflow here by rejecting pairs of a start
position (argv->v_index) and a total count (argv->v_nmembs) which leads to
the overflow.

[konishi.ryusuke@lab.ntt.co.jp: fix signedness issue]
Signed-off-by: Wenliang Fan <fanwlexca@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/pipe.c: skip file_update_time on frozen fs

Pipe has no data associated with fs so it is not good idea to block
pipe_write() if FS is frozen, but we can not update file's time on such
filesystem.  Let's use same idea as we use in touch_time().

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=65701

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-rx8581.c: add SMBus-only adapters support

Add support for SMBus-only adapters (e.g.  i2c-piix4).  The driver has
implemented only support for I2C adapters which implement the
I2C_FUNC_SMBUS_I2C_BLOCK functionality before.

With this patch it is possible to load and use the RTC driver with I2C and
SMBUS adapters like the rtc-ds1307 does.

Tested on AMD G Series Platform (i2c-piix4 adapter driver).

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-s5m.c: s5m_rtc_{suspend,resume}() should depend on CONFIG_PM_SLEEP

If CONFIG_PM_SLEEP=n:

drivers/rtc/rtc-s5m.c:643: warning: `s5m_rtc_resume' defined but not used
drivers/rtc/rtc-s5m.c:654: warning: `s5m_rtc_suspend' defined but not used

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: max8907: weekday encoding fixes

The current MAX8907 driver has two issues related to weekday value
handling:

1)

The HW WEEKDAY register has range 0..6 rather than 1..7 as documented.
Note that I validated the actual HW range by observing the HW register
roll from 6->0 rather than 6->7->1 as would otherwise be expected.

This matches Linux's tm_wday range of 0..6.

When the CMOS RAM content is lost, the date returned from the device is
2007-01-01 00:00:00, which is a Monday.  The WEEKDAY register reads 1 in
this case.  This matches the numbering in Linux's tm_wday field.

Hence we should write Linux's tm_wday value to the register without
modifying it.  Hence, remove the +1/-1 calculations for WEEKDAY/tm_wday.

2)

There's no need to make alarms match on the WEEKDAY register, since the
other fields together uniquely define the alarm date/time.  Ignoring the
WEEKDAY value in the match isolates the driver from any incorrect value in
the current time copy of the WEEKDAY register.

Each change individually, or both together, solves an issue that I
observed; "hwclock -r" would time out waiting for its alarm to fire if the
CMOS RAM content had been lost, and hence the WEEKDAY register value
mismatched what the driver expected it to be.  "hwclock -w" would solve
this by over-writing the HW default WEEKDAY register value with what the
driver expected.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-hym8563.c: staticize local symbol

'hym8563_clkout_ops' is used only in this file.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-hym8563.c: remove redundant of_match_ptr() helper

'hym8563_dt_idtable' is always compiled in.  Hence the helper macro is not
needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds1742.c: remove redundant of_match_ptr() helper

'ds1742_rtc_of_match' is always compiled in.  Hence the helper macro is
not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-cmos.c: propagate hpet_register_irq_handler() failure

If hpet_register_irq_handler() fails, cmos_do_probe() will incorrectly
return 0.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: honor device tree /alias entries when assigning IDs

Assign RTC device IDs based on device tree /aliases entries if present,
falling back to the existing numbering scheme if there is no /aliases
entry (which includes when the system isn't booted using DT), or there is
a numbering conflict.

This is useful in systems with multiple RTC devices, to ensure that the
best RTC device is selected as /dev/rtc0, which provides the overall
system time.

For example, Tegra has an on-SoC RTC that is not battery backed, typically
coupled with an off-SoC RTC that is battery backed.  Only the latter is
useful for populating the system time, yet the former is useful e.g.  for
wakeup timing, since the time is not lost when the system is sleeps.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-pcf2127.c: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO

Fix a coccinelle error regarding usage of IS_ERR and PTR_ERR instead of
PTR_ERR_OR_ZERO.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/Kconfig: disable RTC_DRV_CMOS on Atari

On ARAnyM (emulating an Atari Falcon, which doesn't have an RTC IRQ, as
the Second Multi Function Peripheral MFP 68901 is available on Atari TT
only), rtc-cmos doesn't work well:

  - The date is of by 32 years (2045 instead of 2013):

    rtc_cmos rtc_cmos: setting system clock to 2045-12-02 10:56:17 UTC
    (2395824977)

  - The hwclock utility doesn't work:

    hwclock: ioctl() to /dev/rtc to turn on update interrupts failed
    unexpectedly, errno=5: Input/output error.

As rtc-generic works fine for the RTC part, and nvram works for the NVRAM
part, we'll continue on using that.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-cmos.c: remove superfluous name cast

device_driver.name is "const char *"

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add hym8563 rtc-driver

The Haoyu Microelectronics HYM8563 provides rtc and alarm functions as
well as a clock output of up to 32kHz.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dt-bindings: add hym8563 binding

Add binding documentation for the hym8563 rtc chip.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-vr41xx.c: use devm_*() functions

Use devm_*() functions to make cleanup paths simpler, and remove
unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-twl.c: use devm_*() functions

Use devm_*() functions to make cleanup paths simpler, and remove
unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds1742.c: add devicetree support

This patch allows the driver to be enabled with devicetree.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-mxc.c: check the return value from clk_prepare_enable()

clk_prepare_enable() may fail, so let's check its return value and
propagate it in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-mxc.c: remove unneeded label

There is no need to jump to the 'exit_free_pdata' label when
devm_clk_get() fails, as we can directly return the error and simplify the
code a bit.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds1305.c: remove unnecessary spi_set_drvdata()

The driver core clears the driver data to NULL after device_release or on
probe failure.  Thus, it is not needed to manually clear the device driver
data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-as3722: use devm for rtc and irq registration

Use devm_* calls for rtc and irq registration and get rid of
remove callback for platform driver.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: fix symlinks aren't checked for expiry

The autofs4 module doesn't consider symlinks for expire as it did in the
older autofs v3 module (so it's actually a long standing regression).

The user space daemon has focused on the use of bind mounts instead of
symlinks for a long time now and that's why this has not been noticed.
But with the future addition of amd map parsing to automount(8), not to
mention amd itself (of am-utils), symlink expiry will be needed.

The direct and offset mount types can't be symlinks and the tree mounts of
version 4 were always real mounts so only indirect mounts need expire
symlinks.

Since the current users of the autofs4 module haven't reported this as a
problem to date this patch probably isn't a candidate for backport to
stable.

Signed-off-by: Ian Kent <ikent@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: use IS_ROOT to replace root dentry checks

Use the helper macro !IS_ROOT to replace parent != dentry->d_parent.  Just
clean up.

Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: fix the return value of autofs4_fill_super

While kzallocing sbi/ino fails, it should return -ENOMEM.

And it should return the err value from autofs_prepare_pipe.

Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: translate pids to the right namespace for the daemon

The PID and the TGID of the process triggering the mount are sent to the
daemon.  Currently the global pid values are sent (ones valid in the
initial pid namespace) but this is wrong if the autofs daemon itself is
not running in the initial pid namespace.

So send the pid values that are valid in the namespace of the autofs
daemon.

The namespace to use is taken from the oz_pgrp pid pointer, which was
set at mount time to the mounting process' pid namespace.

If the pid translation fails (the triggering process is in an unrelated
pid namespace) then the automount fails with ENOENT.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Acked-by: Ian Kent <raven@themaw.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: allow autofs to work outside the initial PID namespace

Enable autofs4 to work in a "container".  oz_pgrp is converted from
pid_t to struct pid and this is stored at mount time based on the
"pgrp=" option or if the option is missing then the current pgrp.

The "pgrp=" option is interpreted in the PID namespace of the current
process.  This option is flawed in that it doesn't carry the namespace
information, so it should be deprecated.  AFAICS the autofs daemon
always sends the current pgrp, which is the default anyway.

The oz_pgrp is also set from the AUTOFS_DEV_IOCTL_SETPIPEFD_CMD ioctl.
This ioctl sets oz_pgrp to the current pgrp.  It is not allowed to
change the pid namespace.

oz_pgrp is used mainly to determine whether the process traversing the
autofs mount tree is the autofs daemon itself or not.  This function now
compares the pid pointers instead of the pid_t values.

One other use of oz_pgrp is in autofs4_show_options.  There is shows the
virtual pid number (i.e.  the one that is valid inside the PID namespace
of the calling process)

For debugging printk convert oz_pgrp to the value in the initial pid
namespace.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Acked-by: Ian Kent <raven@themaw.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init: fix possible format string bug

Use constant format string in case message changes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/main.c: remove unused declaration of tc_init()

Its user was removed in v2.5.2.4.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/ramfs: move ramfs_aops to inode.c

ramfs_aops is identical in file-mmu.c and file-nommu.c.  Thus move it to
fs/ramfs/inode.c and make it static.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/ramfs/file-nommu.c: make ramfs_nommu_get_unmapped_area() and ramfs_nommu_mmap() static

Since commit 853ac43ab194 ("shmem: unify regular and tiny shmem"),
ramfs_nommu_get_unmapped_area() and ramfs_nommu_mmap() are not directly
referenced outside of file-nommu.c.  Thus make them static.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: binfmt_elf: remove unused defines INTERPRETER_NONE and INTERPRETER_ELF

These two defines are unused since the removal of the a.out interpreter
support in the ELF loader in kernel 2.6.25

Signed-off-by: Todor Minchev <todor@minchev.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: prefer ether_addr_copy to memcpy(foo, bar, ETH_ALEN)

ether_addr_copy was added for kernel version 3.14.  It's slightly
smaller/faster for some arches.  Encourage its use.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add DT compatible string documentation checks

This adds a simple check that any compatible strings in DeviceTree dts
files are present in Documentation/devicetree/bindings.  Vendor prefixes
are also checked for existing in vendor-prefixes.txt These should be
temporary checks until we have more sophisticated binding schema
checking.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: only flag FSF address, not gnu.org URL

This change restricts the check for the for the FSF address in the GPL
copyright statement so that it only flags the address, not the
references to the gnu.org/licenses URL which appears to be used in
numerous drivers.  The idea is to still allow some reference to an
external copy of the GPL in the event that files are copied out of the
kernel tree without the COPYING file.

So for example this statement will still return an error:
  You should have received a copy of the GNU General Public License
  along with this program; if not, write to the Free Software
  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

However, this statement will not return an error after this patch:
  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add tests for function pointer style misuses

Kernel style uses function pointers in this form:
"type (*funcptr)(args...)"

Emit warnings when this function pointer form isn't used.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Derek Perrin <d.roc16@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: update the FSF/GPL address check

The FSF address check is a bit too verbose looking for the GPL text.
Quiet it a bit by requiring --strict for the GPL bit.

Also make the address tests match a few uses of abbreviations for street
names and make it case insensitive.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: check for if's with unnecessary parentheses

If statements don't need multiple parentheses around tested comparisons
like "if ((foo == bar))".

An == comparison maybe a sign of an intended assignment, so emit a
slightly different message if so.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: improve space before tab --fix option

This test should remove all the spaces before a tab not just one space.

Substitute a tab for each 8 space block before a tab and remove less than
8 spaces before a tab.

This SPACE_BEFORE_TAB test is done after CODE_INDENT.

If there are spaces used at the beginning of a line that should be
converted to tabs, please make sure that the CODE_INDENT test and
conversion is done before this SPACE_BEFORE_TAB test and conversion.

Reported-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add a --fix-inplace option

Add the ability to fix and overwrite existing files/patches instead of
creating a new file "<filename>.EXPERIMENTAL-checkpatch-fixes".

Suggested-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: attempt to find missing switch/case break;

switch case statements missing a break statement are an unfortunately
common error.

e.g.:
  commit 4a2c94c9b6c0 ("HID: kye: Add report fixup for Genius Manticore Keyboard")

case blocks should end in a break/return/goto/continue.

If a fall-through is used, it should have a comment showing that it is
intentional.  Ideally that comment should be something like:
"/* fall-through */"

Add a test to look for missing break statements.

This looks only at the context lines before an inserted case so it's
possible to have false positives when the context contains a close brace
and the break is before the brace and not part of the patch context.

Looking at recent patches, this is a pretty rare occurrence.  The normal
kernel style uses a break as the last line of the previous block.

Signed-off-by: Joe Perches <joe@perche.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add warning of future __GFP_NOFAIL use

gfp.h and page_alloc.c already specify that __GFP_NOFAIL is deprecated and
no new users should be added.

Add a warning to checkpatch to catch this.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn only on "space before semicolon" at end of line

The "space before a non-naked semicolon" test has unwanted output when
used in "for ( ;; )" loops.

Make the test work only on end-of-line statement termination semicolons.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: more comprehensive split strings warning

The current checkpatch test for split strings does not find several
cases that should be found.

For instance:

  /* Else poor success; go back to mode in "active" table */
  } else {
  IWL_DEBUG_RATE(mvm,
-        "LQ: GOING BACK TO THE OLD TABLE suc=%d cur-tpt=%d old-tpt=%d\n",
+        "GOING BACK TO THE OLD TABLE: SR %d "
+        "cur-tpt %d old-tpt %d\n",
         window->success_ratio,
         window->average_tpt,
        lq_sta->last_tpt);

does not currently emit a warning.

Improve the test to find these cases.

Add more exceptions to reduce false positives for assembly and octal/hex
string constants.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

firmware/dmi_scan: generalize for use by other archs

This patch makes a couple of changes to the SMBIOS/DMI scanning
code so it can be used on other archs (such as ARM and arm64):
(a) wrap the calls to ioremap()/iounmap(), this allows the use of a
    flavor of ioremap() more suitable for random unaligned access;
(b) allow the non-EFI fallback probe into hardcoded physical address
    0xF0000 to be disabled.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test: check copy_to/from_user boundary validation

To help avoid an architecture failing to correctly check kernel/user
boundaries when handling copy_to_user, copy_from_user, put_user, or
get_user, perform some simple tests and fail to load if any of them
behave unexpectedly.

Specifically, this is to make sure there is a way to notice if things
like what was fixed in commit 8404663f81d2 ("ARM: 7527/1: uaccess:
explicitly check __user pointer when !CPU_USE_DOMAINS") ever regresses
again, for any architecture.

Additionally, adds new "user" selftest target, which loads this module.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test: add minimal module for verification testing

This is a pair of test modules I'd like to see in the tree.  Instead of
putting these in lkdtm, where I've been adding various tests that trigger
crashes, these don't make sense there since they need to be either
distinctly separate, or their pass/fail state don't need to crash the
machine.

These live in lib/ for now, along with a few other in-kernel test modules,
and use the slightly more common "test_" naming convention, instead of
"test-".  We should likely standardize on the former:

$ find . -name 'test_*.c' | grep -v /tools/ | wc -l
4
$ find . -name 'test-*.c' | grep -v /tools/ | wc -l
2

The first is entirely a no-op module, designed to allow simple testing of
the module loading and verification interface.  It's useful to have a
module that has no other uses or dependencies so it can be reliably used
for just testing module loading and verification.

The second is a module that exercises the user memory access functions, in
an effort to make sure that we can quickly catch any regressions in
boundary checking (e.g.  like what was recently fixed on ARM).

This patch (of 2):

When doing module loading verification tests (for example, with module
signing, or LSM hooks), it is very handy to have a module that can be
built on all systems under test, isn't auto-loaded at boot, and has no
device or similar dependencies.  This creates the "test_module.ko" module
for that purpose, which only reports its load and unload to printk.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/cmdline.c: declare exported symbols immediately

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
+EXPORT_SYMBOL(memparse);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
+EXPORT_SYMBOL(get_option);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
+EXPORT_SYMBOL(get_options);

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Levente Kurusa <levex@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/cmdline.c: fix style issues

WARNING: space prohibited between function name and open parenthesis '('
+int get_option (char **str, int *pint)

WARNING: space prohibited between function name and open parenthesis '('
+ *pint = simple_strtol (cur, str, 0);

ERROR: trailing whitespace
+ $

WARNING: please, no spaces at the start of a line
+ $

WARNING: space prohibited between function name and open parenthesis '('
+ res = get_option ((char **)&str, ints + i);

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/kstrtox.c: remove redundant cleanup

We can't reach the cleanup code unless the flag KSTRTOX_OVERFLOW is not
set, so there's not no point in clearing a bit that we know is not set.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lp8788: remove unnecessary parentheses

Remove unnecessary parentheses in order to fix the following checkpatch
error.

  ERROR: return is not a function, parentheses are not required

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lp855x: remove unnecessary parentheses

Remove unnecessary parentheses in order to fix the following checkpatch
error.

  ERROR: return is not a function, parentheses are not required

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: kb3886_bl: fix incorrect placement of __initdata marker

The __initdata marker can be virtually anywhere on the line, EXCEPT right
after "struct".  The preferred location is before the "=" sign if there is
one, or before the trailing ";" otherwise.  It also fixes the following
chechpatch warning.

  WARNING: __initdata should be placed after kb3886bl_device_table[]

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: tosa: use devm_lcd_device_register()

Use devm_lcd_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: l4f00242t03: use devm_lcd_device_register()

Use devm_lcd_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: jornada720: use devm_lcd_device_register()

Use devm_lcd_device_register() to make cleanup paths simpler,
and remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: tosa: use devm_backlight_device_register()

Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ot200_bl: use devm_backlight_device_register()

Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: omap1: use devm_backlight_device_register()

Use devm_backlight_device_register() to make cleanup paths simpler,
and remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: hp680_bl: use devm_backlight_device_register()

Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>