Petr Štetiar [Sun, 14 Feb 2021 22:22:55 +0000 (23:22 +0100)]
Revert "uboot-imx6: bump to 2021.01 release"
This reverts commit
50a5a8993d15fe090fdbf10fc25aba3f78c47d40 as the bump
to 2021.01 unveiled issue with missing swig host tool needed for
mx6cuboxi's SPL.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Adrian Schmutzler [Sun, 14 Feb 2021 20:51:14 +0000 (21:51 +0100)]
target: fix copying of licenses for SDK/toolchain
The SDK and target/toolchain copy the license file into their
directories. During the rename/move from LICENSE to a LICENSES
folder, this has not been updated.
Update it now, and include the new COPYING file.
While at it, improve formatting/indent.
Fixes: 882e3014610b ("LICENSES: include all used licenses in
LICENSES directory")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Felix Fietkau [Sun, 14 Feb 2021 18:55:09 +0000 (19:55 +0100)]
ath9k: fix transmitting to stations in dynamic SMPS mode
When transmitting to a receiver in dynamic SMPS mode, all transmissions that
use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to
give the receiver's extra chains some time to wake up.
This fixes the tx rate getting stuck at <= MCS7 for some clients, especially
Intel ones, which make aggressive use of SMPS.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 18 Dec 2020 18:03:55 +0000 (19:03 +0100)]
mt76: update to the latest version
261d184cebdc mt76: introduce mt76_vif data structure
50349a8664ef mt76: mt76_connac: create mcu library
c88859180c51 mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module
9856236ab4f9 mt76: mt76_connac: move WoW and suspend code in mt76_connac_mcu module
2da59aacdd50 mt76: mt76_connac: move pm data struct in mt76_connac.h
16be142e40fe mt76: mt76_connac: move pm utility routines in mt76_connac_lib module
c4ccfc66347d mt76: mt7921: add MAC support
8ecf3a50e7ad mt76: mt7921: add MCU support
92c1717f9a55 mt76: mt7921: add DMA support
1cecf9c3da8b mt76: mt7921: add EEPROM support
a9e68410b9ba mt76: mt7921: add ieee80211_ops
39d6f4851b06 mt76: mt7921: introduce mt7921e support
9f37baecf5d6 mt76: mt7921: add debugfs support
b16cf6e26998 mt76: mt7921: introduce schedule scan support
5aa798ee56c7 mt76: mt7921: introduce 802.11 PS support in sta mode
e67d5216f16d mt76: mt7921: introduce support for hardware beacon filter
cb99bf4655f9 mt76: mt7921: introduce beacon_loss mcu event
71f9f09ee987 mt76: mt7921: introduce PM support
2beb9c9530d4 mt76: mt7921: rely on mt76_connac_mcu common library
59e682497d12 mt76: mt7921: rely on mt76_connac_mcu module for sched_scan and hw_scan
1ccf6a9c60cd mt76: mt7921: rely on mt76_connac_mcu module for suspend and WoW support
f8d1ec5e6e11 mt76: mt7921: introduce Runtime PM support
633a1cbd8f4e mt76: mt7921: introduce regdomain notifier support
0d95c6ad1745 mt76: mt7921: enable MSI interrupts
5f4f6792fb37 mt76: mt7921: add coredump support
47eb00e13450 mt76: mt7663: introduce coredump support
26658849a465 mt76: mt7615: fix key set/delete issues
b0ba039bc2ef mt76: mt7615: fix tx skb dma unmap
892f74d37e88 mt76: mt7915: fix tx skb dma unmap
2659f6c6ea23 mt76: mt7615: support loading EEPROM for MT7613BE
b09cc8644529 mt76: dma: do not report truncated frames to mac80211
ae6473f1d2af mt76: mt7921: enable random mac addr during scanning
b59e3677476d mt76: mt7921: remove unnecessary variable
781911f167aa mt76: mt7921: removed unused definitions in mcu.h
994893d38d51 mt76: always use WTBL_MAX_SIZE for tlv allocation
e6c0948ada07 mt76: mt76x0: disable GTK offloading
a75302bcbfe1 mt76: connac: always check return value from mt76_connac_mcu_alloc_wtbl_req
8da10d6f9251 mt76: mt7915: always check return value from mt7915_mcu_alloc_wtbl_req
80a87412e9e9 mt76: mt7915: fix uninitialized variable in mt7915_tm_set_tx_cont()
c7d98fc35865 mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open coded
b5228e75e422 mt76: mt7921: switch to new api for hardware beacon filter
73fce2cbfa41 mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bss
2e2cb71901e8 mt76: mt7921: fixup rx bitrate statistics
2d7b1d72b43b mt76: mt7921: add flush operation
96b4c9874e16 mt76: mt7921: fix uninitialized pointer access in mt7921_get_wtbl_info
4492d801cbb5 mt76: connac: update sched_scan cmd usage
200c1b1c234b mac80211: rename csa counters to countdown counters
0d7564d0d899 mt76: add support for 802.3 rx frames
4c0811c647b9 mt76: mt7915: enable hw rx-amsdu de-aggregation
4b7a68634ff6 mt76: mt7915: add rx checksum offload support
289cd7804587 mt76: mt7915: add support for rx decapsulation offload
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 12 Feb 2021 10:36:47 +0000 (11:36 +0100)]
wolfssl: use dynamic ABI_VERSION depending on the configuration and package version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 12 Feb 2021 10:16:35 +0000 (11:16 +0100)]
build: drop ABI version from metadata
Preparation for supporting dynamic ABI versions that depend on the runtime
configuration. Read the suffix from the staging dir pkginfo version files.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 12 Feb 2021 09:10:41 +0000 (10:10 +0100)]
libubox: use PKG_ABI_VERSION
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 12 Feb 2021 08:56:56 +0000 (09:56 +0100)]
build: add support for fixing up library soname
This makes it possible to declare a package ABI_VERSION independent from the
upstream soname by setting PKG_ABI_VERSION in the package makefile.
The library filename is fixed up for files installed to packages and to the
staging dir. References to the original from executables within the same
package are also fixed up
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 12 Feb 2021 08:47:14 +0000 (09:47 +0100)]
build: fix ABI version rebuild dependency
A stray comma was being appended to the last package version dependency,
causing it to be missed for ABI version checks
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 14 Feb 2021 18:39:02 +0000 (19:39 +0100)]
mac80211: fix a regression in processing rx stats
A logic error caused rx rate update to be missed for any driver not using
fast-rx
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 14 Feb 2021 18:24:05 +0000 (19:24 +0100)]
mac80211: refresh patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 6 Feb 2021 15:46:56 +0000 (16:46 +0100)]
mac80211: add minstrel performance improvements
Reduce fluctuations in rate selection / statistics
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 17 Dec 2020 21:22:22 +0000 (22:22 +0100)]
mac80211: add decapsulation offload support
On hardware that supports this, this will improve performance by passing
802.3 frames from the hardware to the stack
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 17 Dec 2020 21:21:43 +0000 (22:21 +0100)]
mac80211: fix a corner case in encapsulation offload support
Fix encryption key selection with WEP
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 25 Nov 2020 18:51:31 +0000 (19:51 +0100)]
mac80211: add fq performace improvements
Improves performance under load
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rosen Penev [Mon, 4 Jan 2021 00:28:34 +0000 (16:28 -0800)]
libnftnl: update to 1.1.8
Fix license information.
Fix wrong ABI version. The library is versioned as libnftnl.so.11.4.0
Add PKG_BUILD_PARALLEL for faster compilation.
Remove autoreconf as nothing is being patched.
Minor cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 4 Jan 2021 00:28:18 +0000 (16:28 -0800)]
libevent2: update to 2.1.12
Remove upstream backports.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 4 Jan 2021 00:27:57 +0000 (16:27 -0800)]
readline: update to 8.1
Fix license.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 4 Jan 2021 00:27:48 +0000 (16:27 -0800)]
gmp: update to 6.2.1
Fix license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 4 Jan 2021 00:27:37 +0000 (16:27 -0800)]
f2fs-tools: update to 1.14.0
Fix license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Adrian Schmutzler [Fri, 12 Feb 2021 12:52:03 +0000 (13:52 +0100)]
COPYING: add COPYING file to specify project licenses
Since multiple licenses are provided now in the LICENSES folder,
add a COPYING file to specify the project license.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Paul Spooren <mail@aparcar.org>
Paul Spooren [Tue, 22 Sep 2020 19:08:58 +0000 (09:08 -1000)]
scripts: fix checkpatch.pl for changed license dir
As multiple LICENSES are shipped and no longer just LICENSE, modify the
OpenWrt tree detection in checkpatch.pl.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Adrian Schmutzler [Fri, 12 Feb 2021 12:37:58 +0000 (13:37 +0100)]
LICENSES: include all used licenses in LICENSES directory
OpenWrt ships code not only licensed via GPL-2.0-{only,or-later}.
Reflect that by adding the missing licenses, just like the kernel
does.
This patch takes the license text as it is found in the Linux
kernel, which might probably be the best common denominator here.
In contrast to the kernel versions, only some changes to the
valid and recommended identifiers were made (GPL-x.x+ vs.
GPL-x.x-or-later and similar).
Suggested-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
John Audia [Sat, 13 Feb 2021 15:30:20 +0000 (10:30 -0500)]
kernel: bump 5.4 to 5.4.98
Ran update_kernel.sh in a fresh clone without any existing toolchains.
No manual changes needed.
Build system: x86_64
Build-tested: bcm27xx/bcm2711, ipq806x/R7800
Run-tested: ipq806x/R7800
Compile-tested [*]: ath79/{generic,tiny}, ipq40xx, octeon, realtek,
ramips/{mt7620,mt7621}, x86/64
Run-tested [*]: ath79/{generic,tiny}: WNDR3700v2 / TL-WR841N v7
octeon: EdgeRouter Lite
ramips/{mt7620,mt7621}: Archer C2 v1 / DIR-878 A1,
EAP235-Wall, R6800, RT-AC57U v1
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
Paul Fertser [Sun, 14 Feb 2021 09:16:33 +0000 (12:16 +0300)]
ath79: fix factory image generation for Netgear and Zyxel boards
The factory images need to embed specific IDs to pass verification with
the OEM firmware (including TFTP recovery), so they need to be
per-device variables.
Fixes: ab1584a797ad ("ath79: netgear: trim down uImage customisations")
Fixes: 459c8c9ef816 ("ath79: add support for ZyXEL NBG6616")
Reported-by: Marcin Juszkiewicz <marcin-openwrt@juszkiewicz.com.pl>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[minor commit message adjustments, sort DEVICE_VARS]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Rosen Penev [Mon, 1 Feb 2021 00:15:54 +0000 (16:15 -0800)]
busybox: remove useless busybox patches
The first two are useless as /bin/sh can execute those scripts just
fine. Shellcheck reports no problems.
Telnetd patch is useless as telnet is no longer used in OpenWrt.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 1 Feb 2021 00:15:53 +0000 (16:15 -0800)]
busybox: update to 1.33
Remove stime backport.
Remove static libgcc patch as upstream fixed it with
BUSYBOX_DEFAULT_STATIC_LIBGCC which defauls to off.
Remove date -k patch as it no longer applies. It's also pointless as
busybox' hwclock utility can do the same thing.
Remove ntpd patch as that seems to have been applied upstream.
Add smalll patch fixing compilation with SELinux. Upstream commit
2496616b0a8d1c80cd1416b73a4847b59b9f969a renamed the variable without
renaming it in the SELinux path.
Refresh config and patches.
Config refresh:
Refresh commands, run after busybox is first built once:
cd package/utils/busybox/config/
../convert_menuconfig.pl ../../../../build_dir/target-mips_24kc_musl/busybox-default/busybox-1.33.0
cd ..
./convert_defaults.pl < ../../../build_dir/target-mips_24kc_musl/busybox-default/busybox-1.33.0/.config > Config-defaults.in
Manual edits needed afterward:
* Config-defaults.in: OpenWrt config symbol IPV6 logic applied to
BUSYBOX_DEFAULT_FEATURE_IPV6
* Config-defaults.in: OpenWrt configTARGET_bcm53xx logic applied to
BUSYBOX_DEFAULT_TRUNCATE (commit
547f1ec)
* editors/Config.in: Add USE_GLIBC dependency to
BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit
f141090)
* shell/Config.in : change at "Options common to all shells" the symbol
SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH
(discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html
Apparently our script does not see the hidden option while
prepending config options with "BUSYBOX_CONFIG_" which leads to a
missed dependency when the options are later evaluated.)
* Edit Config.in files by adding quotes to sourced items in
config/Config.in, networking/Config.in and util-linux/Config.in (commit
1da014f)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[Added comments from Hannu Nyman to commit message]
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 1 Feb 2021 00:15:52 +0000 (16:15 -0800)]
base-files: use hwclock --systz
The date -k patch is non standard and will be removed in the next
commit.
Tested behavior to be identical with a simple C program:
#define _GNU_SOURCE
#include <unistd.h>
#include <stdio.h>
#include <sys/time.h>
#include <sys/syscall.h>
int main()
{
struct timezone tt;
struct timezone tz;
int a = syscall(SYS_gettimeofday, NULL, &tt);
int b = gettimeofday(NULL, &tz);
printf("%d - %d, %d\n", a, tt.tz_minuteswest, tt.tz_dsttime);
printf("%d - %d, %d\n", b, tz.tz_minuteswest, tz.tz_dsttime);
}
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Hauke Mehrtens [Sun, 29 Nov 2020 12:12:29 +0000 (13:12 +0100)]
iw: Update to version 5.9
The nl80211.h file is mostly matching kernel 5.10, so remove most of our
changes from the patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Fri, 13 Nov 2020 19:14:09 +0000 (20:14 +0100)]
mac80211: Update to version 5.10-rc6-1
The removed patches were applied upstream.
This adapts ath10k-ct and mt76 to changed APIs.
nl80211.h in iw is updated to match the version from backports.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 7 Nov 2020 16:50:20 +0000 (17:50 +0100)]
mac80211: Update to version 5.9.12-1
The removed patches were applied upstream.
Remove the 300-mac80211-optimize-skb-resizing.patch.
This patch was not applied upstream, but it conflicts with upstream
changes and needs bigger changes. It was applied with Felix to remove
this patch for now. It should be reworked and then send upstream later.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tomasz Maciej Nowak [Thu, 11 Feb 2021 18:29:32 +0000 (19:29 +0100)]
mvebu: espressobin: drop COMPHY removement patch
There are proper workarounds merged to 5.4 stable tree for ESPRESSObin
boards with older bootloader:
4e1a23779bde ("ata: ahci: mvebu: Make SATA PHY optional for Armada 3720")
40af962eb1d4 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for
Armada 3720")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Sander Vanheule [Thu, 4 Feb 2021 14:49:14 +0000 (15:49 +0100)]
ramips: manage low reset lines
The bootloader of a number of recent TP-Link devices does not properly
initialise the MT7621's internal switch when booting from flash. To
enable the mt7530 driver to clear the reset on the switch, the ramips
reset controller must be allowed to toggle these.
Backport upstream commit
3f9ef7785a9c from mips-next to allow control of
the "mcm" reset line.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Petr Štetiar [Mon, 8 Feb 2021 14:40:07 +0000 (15:40 +0100)]
imx6: bootscript-apalis: make it working on v2021.01 release
Upstream in commit
8b9c0cb46471 ("apalis_imx6: boot env configuration
updates") removed emmc legacy wrappers, but so far didn't included any
replacements. Fix it by simply defining the missing variables and UUID
gathering directly into the boot script.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Tue, 14 Apr 2020 21:21:19 +0000 (23:21 +0200)]
uboot-imx6: bump to 2021.01 release
Refreshed all patches, removed 110-mx6cuboxi-mmc-fallback.patch as it
seems, that upstream has probably added similar funcionality in commit
6c3fbf3e456c ("mx6cuboxi: customize board_boot_order to access eMMC")
and it needs to be re-verified by device owner.
Run tested on apalis.
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Vladimir Vid <vladimir.vid@sartura.hr>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Adrian Schmutzler [Sat, 13 Feb 2021 20:01:14 +0000 (21:01 +0100)]
bcm4908: refresh patches
Our patch refresh tool creates quite a big diff for these patches,
as it does not use rename syntax.
Push the refresh separately so it does not pollute the next kernel
bump. This is a purely cosmetic change.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Martin Kennedy [Sat, 13 Feb 2021 05:38:52 +0000 (05:38 +0000)]
ath79: fix chip used for Meraki MR12 caldata_extract
The original setup fails to trigger ART calibration data
extraction for the AR9287. Instead, it would only have extracted
calibration data for an internal WMAC chip which is not present on
this board.
Fixes: 55d2db0e8ceb ("ath79: add support for Meraki MR12")
Signed-off-by: Martin Kennedy <hurricos@gmail.com>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Stijn Segers [Sat, 13 Feb 2021 09:39:42 +0000 (10:39 +0100)]
ramips: remove factory image for TP-Link Archer C2 v1
Initial commit
8375623a0640 ("ramips: add support for TP-Link Archer
C2") contains detailed installation instructions, which do not mention
a factory image. From what I can see, no support to install OpenWrt
through the vendor web interface has been added since. The factory
image is also conspicuously absent from the device page in the wiki.
Yet, it is available for download.
I bricked my Archer C2 loading the factory image through the web UI.
Serial showed this error during bootloop:
Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover
This patch disables the undocumented factory image so users won't get
tricked into thinking easy web UI flashing actually works.
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Daniel Golle [Sat, 13 Feb 2021 20:10:04 +0000 (20:10 +0000)]
trusted-firmware-a: fix project name spelling
The version string generated for ARM Trusted-Firmware-A was stated as
"OpenWRT". Fix that by changing it to the exact spelling "OpenWrt"
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 13 Feb 2021 19:20:19 +0000 (19:20 +0000)]
iwinfo: update to version 2021-01-31
5a2dd18 iwinfo: add hardware description for MediaTek MT7622
4a32b33 iwinfo: add PCI ID for MediaTek MT7613BE
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Raphaël Mélotte [Tue, 9 Feb 2021 06:54:10 +0000 (07:54 +0100)]
hostapd: add patch for setting 4addr mode in multi_ap
This patch is required to be able to roam from one backhaul AP to
another one in the same ESS.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(daniel@makrotopia.org: PKG_REVISION bump and refreshed patches)
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Hans Dedecker [Sat, 13 Feb 2021 09:04:51 +0000 (10:04 +0100)]
glibc: update to latest 2.33 commit
c5e3545897 tunables: Disallow negative values for some tunables
905fdc7071 x86: Use SIZE_MAX instead of (long int)-1 for tunable range value
15afd6b8d8 tunables: Simplify TUNABLE_SET interface
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Rafał Miłecki [Fri, 12 Feb 2021 15:28:57 +0000 (16:28 +0100)]
bcm4908: fix handling Ethernet frames of size 1506 - 1514
MTU needs to be explicitly set as default value is too low.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Feb 2021 08:01:40 +0000 (09:01 +0100)]
bcm4908: use upstream accepted Ethernet driver patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Michael Mohr [Sat, 9 Jan 2021 05:35:47 +0000 (21:35 -0800)]
realtek: add support for Netgear GS108T v3
The Netgear GS108T v3 is an 8 port gigabit switch with PoE-PD support
on port 1. The two prior versions were built using eCos and are not
currently compatible with OpenWRT.
The GS108T v3 is quite similar to both the GS110TPP v1 and GS110TP v3,
all of which use the same firmware image from Netgear. For this reason,
the device tree is identical aside from the model and compatible values.
All of the above feature a dual firmware layout, referred to as Image0
and Image1 in the Netgear firmware.
Hardware specification
----------------------
* RTL8380M SoC, 1 MIPS 4KEc core @ 500MHz
* 128MB DDR3-1600 DRAM (Winbond W631GG8MB-12)
* 32MB 3v NOR SPI Flash (Macronix MX25L25635F or Winbond W25Q256JVFIQ)
* RTL8231 GPIO extender to control the LEDs and the reset button
* 8 x 10/100/1000BASE-T ports, internal PHY (RTL8218B)
* UART (115200 8N1) via unpopulated standard 0.1" pin header marked J1
* Power is supplied via a 12V 1A barrel connector or 802.3af
UART pinout
-----------
J1 | [o]ooo
^ ||`------ GND
| |`------- RX [TX out of the serial adapter]
| `-------- TX [RX into the serial adapter]
`---------- Vcc (3V3) [the square pin]
The through holes are filled with PB-free solder which melts at 375C.
They can also be drilled using a 0.9mm bit.
Build configuration
-------------------
* Target System: Realtek MIPS
* Target Profile: Netgear GS108T v3
* Target Images -> ramdisk -> Compression: lzma
* Disable other target images
Boot initramfs image from U-Boot
--------------------------------
1. Press the Escape key at the `Hit Esc key to stop autoboot` prompt
2. Init network with `rtk network on` command
3. Load image with `tftpboot 0x8f000000 openwrt-realtek-generic-netgear_gs108t-v3-initramfs-kernel.bin` command
4. Boot the image with `bootm` command
The switch defaults to IP 192.168.1.1 and tries to fetch the image via
TFTP from 192.168.1.111.
Updating the installed firmware
-------------------------------
The OpenWRT ramdisk image can be flashed directly from the Netgear UI.
The Image0 slot should be used in order to enable sysupgrade.
As with similar switches, changing the active boot partition can be
accomplished in U-Boot as follows:
1. Press the Escape key at the `Hit Esc key to stop autoboot` prompt
2. Run `setsys bootpartition {0|1}` to select the boot partition
3. Run `savesys` followed by `boota` to proceed with the boot process
Signed-off-by: Michael Mohr <akihana@gmail.com>
Michael Mohr [Sat, 9 Jan 2021 05:31:53 +0000 (21:31 -0800)]
realtek: refactor the Netgear GS110TPP v1 device tree
Move most of the GS110TPP v1 device tree into a dtsi so that it can be
shared with the GS108T v3. Additionally:
* Use macros to simplify the ethernet and switch definitions
* Zero-pad the offsets and sizes in the partition map to 8 digits each
The spi-max-frequency value has been changed from 10MHz to 50MHz based
on an analysis of the relevant datasheets. The current driver doesn't
use this property, as the clock speed is fixed. However, it's required
for this type of DT node, so that's why it's present here.
The firmware partition has been split in half, since this is how the
stock firmware uses it. This can be used to easily revert to a stock
firmware if one is written to the second image area.
Signed-off-by: Michael Mohr <akihana@gmail.com>
Michael Mohr [Sat, 9 Jan 2021 05:21:15 +0000 (21:21 -0800)]
realtek: add and use netgear_nge for the GS110PP v1
The netgear_nge device will be shared between the GS108T v3 (to be added
in a later commit) and the GS110PP v1. It also enables LZMA compression
for the ramdisk image.
Signed-off-by: Michael Mohr <akihana@gmail.com>
Raphaël Mélotte [Thu, 4 Feb 2021 13:21:31 +0000 (14:21 +0100)]
hostapd: reconfigure wps credentials on reload
This patch fixes a bug that prevents updating Multi-AP credentials
after hostapd has started.
It was sent to upstream hostapd here:
https://patchwork.ozlabs.org/bundle/rmelotte/hostapd:%20update%20WPS%20credentials%20on%20SIGHUP/
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Raphaël Mélotte [Thu, 26 Nov 2020 14:20:52 +0000 (15:20 +0100)]
hostapd: add notifications for management frames
This patch allows other applications to get events management
frames (for example: association requests).
This is useful in Multi-AP context to be able to save association
requests from stations.
It has been sent to upstream hostapd in this series:
https://patchwork.ozlabs.org/project/hostap/list/?series=217500
'700-wifi-reload.patch' is updated due to the introduction of
'110-notify-mgmt-frames.patch'.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Antti Seppälä [Sun, 3 Jan 2021 15:09:39 +0000 (17:09 +0200)]
ltq-ptm: Update VR9 PTM firmware
After looking at various vendor GPL source code dumps I discovered that some
of them contain updated versions of ltq-ptm driver when compared to what
openwrt has.
The driver update is mostly cursory (simple changes to comments, whitespace,
formatting etc.) or adds debug features not used by openwrt.
However the updated driver also contains a later version of PTM firmware which
is extracted and included in this commit along with bits to correctly identify
its version when driver loads.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Adrian Schmutzler [Sat, 2 Jan 2021 14:05:13 +0000 (15:05 +0100)]
ath79: fix USB power GPIO for TP-Link TL-WR810N v1
The TP-Link TL-WR810N v1 is known to cause soft-brick on ath79 and
work fine for ar71xx [1]. On closer inspection, the only apparent
difference is the GPIO used for the USB regulator, which deviates
between the two targets.
This applies the value from ar71xx to ath79.
Tested successfully by a forum user.
[1] https://forum.openwrt.org/t/tp-link-tl-wr810n-v1-ath79/48267
Fixes: cdbf2de77768 ("ath79: Add support for TP-Link WR810N")
Fixes: FS#3522
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
INAGAKI Hiroshi [Fri, 13 Sep 2019 15:14:36 +0000 (00:14 +0900)]
ramips: add support for ELECOM WRC-1167FS
ELECOM WRC-1167FS is a 2.4/5 GHz band 11ac (WiFi-5) router, based on
MT7628AN.
Specification:
- SoC : MediaTek MT7628AN
- RAM : DDR2 64 MiB (NT5TU32M16FG-AC)
- Flash : SPI-NOR 16 MiB (W25Q128JVSIQ)
- WLAN : 2.4/5 GHz 2T2R
- 2.4 GHz : MediaTek MT7628AN (SoC)
- 5 GHz : MediaTek MT7612E
- Ethernet : 10/100 Mbps x2
- Switch : MT7628AN (SoC)
- LEDs/Keys : 6x, 3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J1: 3.3V, GND, TX, RX from "J1" marking
- 57600n8
- Power : 12 VDC, 1 A
Flash instruction using factory image:
1. Boot WRC-1167FS normally
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button to
perform firmware update
4. Wait ~120 seconds to complete flashing
Notes:
- Last 0x800000 (8 MiB) in SPI-NOR flash is not used on stock firmware
- Additional padding in factory image is required to avoid incomplete
flashing on stock firmware
MAC addresses:
- LAN : BC:5C:4C:xx:xx:68 (Config, ethaddr (text) / Factory, 0x28 (hex))
- WAN : BC:5C:4C:xx:xx:69 (Config, wanaddr (text) / Factory, 0x22 (hex))
- 2.4GHz: BC:5C:4C:xx:xx:6A (Config, rmac (text) / Factory, 0x4 (hex))
- 5GHz : BC:5C:4C:xx:xx:6B (Config, rmac2 (text) / Factory, 0x8004 (hex))
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
John Audia [Wed, 10 Feb 2021 16:20:24 +0000 (11:20 -0500)]
kernel: bump 5.4 to 5.4.97
Ran update_kernel.sh in a fresh clone without any existing toolchains.
Manually rebased:
bcm27xx
950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch
bcm53xx
180-usb-xhci-add-support-for-performing-fake-doorbell.patch
layerscape
302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch
820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch
820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch
Build system: x86_64
Build-tested: bcm27xx/bcm2711, ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions/everything functional.
Signed-off-by: John Audia <graysky@archlinux.us>
[remove quilt comment, fix/adjust 820-usb-* layerscape patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel Golle [Wed, 10 Feb 2021 19:18:04 +0000 (19:18 +0000)]
arm-trusted-firmware-tools: add patch to pass LDFLAGS
This should hopefully fix builds on the buildbot.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Wed, 10 Feb 2021 14:39:01 +0000 (15:39 +0100)]
at91: use SPDX license identifiers on DTS files
Use SPDX license tags to allow machines to check licenses.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 10 Feb 2021 14:14:52 +0000 (15:14 +0100)]
target: use SPDX license identifiers on scripts
Use SPDX license tags to allow machines to check licenses.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 10 Feb 2021 13:52:34 +0000 (14:52 +0100)]
target: use SPDX license identifiers on Makefiles
Use SPDX license tags to allow machines to check licenses.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Rafał Miłecki [Wed, 10 Feb 2021 10:27:44 +0000 (11:27 +0100)]
bcm4908: update Ethernet driver
Use the latest version sent upsteram.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Wed, 10 Feb 2021 02:45:05 +0000 (02:45 +0000)]
arm-trusted-firmware-mediatek: mark @BROKEN until bromimage gets fixed
The 'bromimage' tool which is used to wrap bl2 with a MediaTek-specific
header is distributed in binary form only and unfortunately tries to
dynamically link against libopenssl, which fails on the buildbots.
Wait for MTK to provide a at least static executable instead, in the
meantime, mark the package as broken.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 10 Feb 2021 01:05:00 +0000 (01:05 +0000)]
arm-trusted-firmware-tools: fix passing of CFLAGS
HOST_CFLAGS were ignored as they were passed on incorrectly which lead
to build failure if OpenSSL wasn't present on the build host.
Fix that by properly passing HOST_CFLAGS when building each tool.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hauke Mehrtens [Mon, 8 Feb 2021 23:53:09 +0000 (00:53 +0100)]
wolfssl: Backport fix for CVE-2021-3336
This should fix CVE-2021-3336:
DoTls13CertificateVerify in tls13.c in wolfSSL through 4.6.0 does not
cease processing for certain anomalous peer behavior (sending an
ED22519, ED448, ECC, or RSA signature without the corresponding
certificate).
The patch is backported from the upstream wolfssl development branch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Tue, 9 Feb 2021 20:20:32 +0000 (20:20 +0000)]
arm-trusted-firmware-tools: remove tools which require libopenssl
They are anyway not used for now, so only build fiptool and sptool.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Curtis Deptuck [Mon, 8 Feb 2021 21:20:11 +0000 (14:20 -0700)]
glibc: update to 2.33
ChangeLog:
https://sourceware.org/pipermail/libc-alpha/2021-February/122207.html
Refresh patch:
None required
Signed-off-by: Curtis Deptuck <curtdept@me.com>
Andrew Pikler [Wed, 27 Jan 2021 17:35:49 +0000 (19:35 +0200)]
ramips: add support for Cudy WR1300
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 128 MB (DDR3)
- Flash: 16 MB (SPI NOR)
- WiFi: MediaTek MT7603E, MediaTek MT7612E
- Switch: 1 WAN, 4 LAN (Gigabit)
- Ports: 1 USB 3.0
- Buttons: Reset, WPS
- LEDs: Power, System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS, USB
- Power: DC 12V 1A tip positive
UART Serial:
115200 baud
Located on unpopulated 4 pin header near J4:
J4
[o] Rx
[o] Tx
[o] GND
[ ] Vcc - Do not connect
Installation:
Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.
Recovery:
- Loads only signed manufacture firmware due to bootloader RSA verification
- serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
- connect to any lan ethernet port
- power on the device while holding the reset button
- wait at least 8 seconds before releasing reset button for image to
download
- See http://www.cudytech.com/newsinfo/547425.html
MAC addresses as verified by OEM firmware:
use address source
LAN *:f0 label
WAN *:f1 label + 1
2g *:f0 label
5g *:f2 label + 2
The label MAC address is found in bdinfo 0xde00.
Signed-off-by: Andrew Pikler <andrew.pikler@gmail.com>
Sebastian Schaper [Tue, 1 Dec 2020 21:34:34 +0000 (22:34 +0100)]
ath79: add support for D-Link DAP-3662 A1
Specifications:
* QCA9557, 16 MiB Flash, 128 MiB RAM, 802.11n 2T2R
* QCA9882, 802.11ac 2T2R
* 2x Gigabit LAN (1x 802.11af PoE)
* IP68 pole-mountable outdoor case
Installation:
* Factory Web UI is at 192.168.0.50
login with 'admin' and blank password, flash factory.bin
* Recovery Web UI is at 192.168.0.50
connect network cable, hold reset button during power-on and keep it
pressed until uploading has started (only required when checksum is ok,
e.g. for reverting back to oem firmware), flash factory.bin
After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.
Both ethernet ports are set to LAN by default, matching the labelling on
the case. However, since both GMAC Interfaces eth0 and eth1 are connected
to the switch (QCA8337), the user may create an additional 'wan' interface
as desired and override the vlan id settings to map br-lan / wan to either
the PoE or non-PoE port, depending on the individual scenario of use.
So, the LAN and WAN ports would then be connected to different GMACs, e.g.
config interface 'lan'
option ifname 'eth0.1'
...
config interface 'wan'
option ifname 'eth1.2'
...
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '1 0t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '2 6t'
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
[add configuration example]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Chukun Pan [Mon, 8 Feb 2021 08:28:10 +0000 (16:28 +0800)]
ramips: add support for JCG Y2
JCG Y2 is an AC1300M router
Hardware specs:
SoC: MediaTek MT7621AT
Flash: Winbond W25Q128JVSQ 16MiB
RAM: Nanya NT5CB128M16 256MiB
WLAN: 2.4/5 GHz 2T2R (1x MediaTek MT7615)
Ethernet: 10/100/1000 Mbps x5
LED: POWER, INTERNET, 2.4G, 5G
Button: Reset
Power: DC 12V,1A
Flash instructions:
Upload factory.bin in stock firmware's upgrade page.
MAC addresses map:
0x0004 *:c8 wlan2g/wlan5g/label
0xe000 *:c7 lan
0xe006 *:c6 wan
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Hauke Mehrtens [Sun, 31 Jan 2021 16:08:05 +0000 (17:08 +0100)]
uboot-envtools: Update to version 2021.01
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 6 Jan 2021 18:36:44 +0000 (19:36 +0100)]
tools: mkimage: Update U-Boot to version 2021.01
* The fit image is now created with 0666 permission in upstream U-Boot
remove our patch switch creates it with 0744
* The generated/autoconf.h file is created now as an empty file, it is
not needed to remove this include any more.
* Upstream lib/rsa/rsa-sign.c now includes stdlib.h instead of malloc.h
* ALIGN_MASK was moved to imagetool.h, own patch should not be needed
any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Andre Heider [Tue, 26 Jan 2021 08:00:52 +0000 (09:00 +0100)]
ltq-dsl-base: remove usused lantiq_dsl.sh
All users have been converted to ubus.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Tested-by: Martin Schiller <ms@dev.tdt.de>
Andre Heider [Tue, 26 Jan 2021 08:00:51 +0000 (09:00 +0100)]
ltq-adsl-app: use ubus to provide metrics
luci now uses ubus directly, so remove 'lucistat'.
For manual usage just print the ubus output, use luci for a pretty
version.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Tue, 26 Jan 2021 08:00:50 +0000 (09:00 +0100)]
ltq-vdsl-app: use ubus to provide metrics
luci now uses ubus directly, so remove 'lucistat'.
For manual usage just print the ubus output, use luci for a pretty
version.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Tested-by: Martin Schiller <ms@dev.tdt.de>
Andre Heider [Tue, 26 Jan 2021 08:00:49 +0000 (09:00 +0100)]
ltq-adsl-app: add ubus support to get metrics
As with ltq-vdsl-app, see previous commit.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Tue, 26 Jan 2021 08:00:48 +0000 (09:00 +0100)]
ltq-vdsl-app: add ubus support to get metrics
Add a 'dsl' ubus object with a 'metrics' function to replace the
expensive shell parsing done by /etc/init.d/dsl_control [dsl|luci]stat.
All metrics are gathered by using syscalls. An additional thread is started
to handle ubus events.
$ time /etc/init.d/dsl_control dslstat
real 0m 2.66s
user 0m 0.90s
sys 0m 1.76s
$ time ubus call dsl metrics
real 0m 0.02s
user 0m 0.00s
sys 0m 0.01s
Example output:
{
"api_version": "4.17.18.6",
"firmware_version": "5.8.1.5.0.7",
"chipset": "Lantiq-VRX200",
"driver_version": "1.5.17.6",
"state": "Showtime with TC-Layer sync",
"up": true,
"uptime": 3891,
"atu_c": {
"vendor_id": [
181,
0,
66,
68,
67,
77,
178,
26
],
"vendor": "Broadcom 178.26",
"system_vendor_id": [
181,
0,
66,
68,
67,
77,
0,
0
],
"system_vendor": "Broadcom",
"version": [
49,
57,
46,
48,
46,
51,
53,
46,
50,
32,
86,
69,
95,
49,
49,
95
],
"serial": [
65,
65,
49,
52,
52,
54,
70,
69,
48,
90,
87,
45,
48,
56,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
},
"power_state": "L0 - Synchronized",
"xtse": [
0,
0,
0,
0,
0,
0,
0,
2
],
"annex": "B",
"standard": "G.993.2",
"profile": "17a",
"mode": "G.993.2 (VDSL2, Profile 17a, with down- and upstream vectoring)",
"upstream": {
"vector": true,
"trellis": true,
"bitswap": true,
"retx": true,
"virtual_noise": false,
"interleave_delay": 0,
"data_rate":
31999000,
"latn": 8.500000,
"satn": 8.400000,
"snr": 12.700000,
"actps": -90.100000,
"actatp": 13.400000,
"attndr":
37180000
},
"downstream": {
"vector": true,
"trellis": true,
"bitswap": true,
"retx": true,
"virtual_noise": false,
"interleave_delay": 140,
"data_rate":
89998000,
"latn": 9.500000,
"satn": 9.600000,
"snr": 13.300000,
"actps": -90.100000,
"actatp": -1.600000,
"attndr":
116315372
},
"errors": {
"near": {
"es": 1,
"ses": 0,
"loss": 3,
"uas": 424,
"lofs": 0,
"fecs": 0,
"hec": 0,
"ibe": 0,
"crc_p": 0,
"crcp_p": 0,
"cv_p": 0,
"cvp_p": 0,
"rx_corrupted": 27740,
"rx_uncorrected_protected": 27010,
"rx_retransmitted": 0,
"rx_corrected": 730,
"tx_retransmitted": 16222
},
"far": {
"es": 242,
"ses": 71,
"loss": 0,
"uas": 424,
"lofs": 0,
"fecs": 22687,
"hec": 0,
"ibe": 0,
"crc_p": 0,
"crcp_p": 0,
"cv_p": 0,
"cvp_p": 0,
"rx_corrupted":
1383552,
"rx_uncorrected_protected":
1220215,
"rx_retransmitted": 0,
"rx_corrected": 163337,
"tx_retransmitted":
1574051
}
}
}
Signed-off-by: Andre Heider <a.heider@gmail.com>
Tested-by: Martin Schiller <ms@dev.tdt.de>
Andre Heider [Tue, 26 Jan 2021 08:00:47 +0000 (09:00 +0100)]
ltq-vdsl-app: shutdown upon sigterm
procd sends sigterm to stop daemons, hook it up.
This speeds up the shutdown sequence and gets rid of the following message:
daemon.info procd: Instance dsl_control::instance1 pid 15408 not stopped on SIGTERM, sending SIGKILL instead
Signed-off-by: Andre Heider <a.heider@gmail.com>
Tested-by: Martin Schiller <ms@dev.tdt.de>
Michael Pratt [Mon, 11 Jan 2021 08:34:33 +0000 (03:34 -0500)]
ath79: use internal switch for EAP300 v2
Have the port use GMAC1 with internal switch
which fixes the issue of the ethernet LED not functioning
The LED is triggered by the internal switch, not a GPIO.
The GPIO for the ethernet LED was added in ath79
as it was defined in the ar71xx target
but it was not functioning in ath79 for a previously unknown reason.
It is unknown why that GPIO was defined as an LED in ar71xx.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
[drop unrelated changes: model property and SPI max frequency]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Michael Pratt [Fri, 1 Jan 2021 22:23:04 +0000 (17:23 -0500)]
ath79: make all eth ports LAN for Engenius APs
for:
- ENH202 v1
- ENS202EXT v1
- EnstationAC v1
- EWS511AP
For EWS511AP, have default behavior as static ip
to match the behavior of all other APs in ath79
These boards are sold as
Client Bridge or Point to Point or Access Point
so there is probably no benefit to have WAN by default
for one of the ports, to prevent user confusion.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
John Audia [Sun, 7 Feb 2021 17:36:29 +0000 (12:36 -0500)]
kernel: bump 5.4 to 5.4.96
Ran update_kernel.sh in a fresh clone without any existing toolchains.
Build system: x86_64
Build-tested: ipq806x/R7800, bcm27xx/bcm2711
Run-tested: ipq806x/R7800
Run-tested [*]: ramips/mt7621 (R6800, DIR-878 A1, EAP235-Wall)
Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
Kevin Darbyshire-Bryant [Sun, 24 Jan 2021 22:19:33 +0000 (22:19 +0000)]
dnsmasq: Bump to v2.84
dnsmasq v2.84rc2 has been promoted to release.
No functional difference between v2.83test3 and v2.84/v2.84rc2
Backport 2 patches to fix the version reporting
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Rafał Miłecki [Mon, 8 Feb 2021 11:05:04 +0000 (12:05 +0100)]
bcm4908: add board.d network setup
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 8 Feb 2021 10:45:03 +0000 (11:45 +0100)]
bcm4908: add Ethernet driver
This commit picks up pending netdev patches.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Fri, 1 Jan 2021 12:47:11 +0000 (12:47 +0000)]
dnsmasq: switch to ubus-based hotplug call
Use new ubus-based hotplug call in dhcp-script.sh
As sysntpd now makes use of the new ubus-based hotplug calls, dnsmasq
no longer needs to ship ACL to cover ntpd-hotplug.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 1 Jan 2021 12:45:48 +0000 (12:45 +0000)]
busybox: sysntpd: make use of new ubus hotplug.ntp object
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 21 Dec 2020 23:05:19 +0000 (23:05 +0000)]
procd: add hotplug-call dispatcher ubus objects
Add per-subsystem ubus objects exposing hotplug-call.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Ilya Lipnitskiy [Sat, 6 Feb 2021 05:11:20 +0000 (21:11 -0800)]
acx-mac80211: replace dead URLs with OpenWrt CDN
erley.org no longer exists; attempting to connect to it during package
download results in lengthy timeouts. Use the new OpenWrt CDN alias to
download from reliable OpenWrt mirrors.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Szabolcs Hubai [Tue, 15 Dec 2020 00:46:54 +0000 (01:46 +0100)]
ramips: disable default build for HooToo HT-TM02
While the latest version of 19.07 release is usable,
the current master is unbootable on the device in a normal way.
"Normal way" installations includes:
- sysupgrade (e.g. from 19.07)
- RESET button recovery with Ron Curry's (Wingspinner) UBoot image
(10.10.10.3 + "Kernal.bin")
- RESET button recovery with original U-Boot
(10.10.10.254 + "kernel")
One could flash and boot the latest master sysupgrade image successfully
with serial access to the device. But a sysupgrade from this state still
breaks the U-Boot and soft-bricks the device.
Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
Adrian Schmutzler [Sun, 7 Feb 2021 20:42:19 +0000 (21:42 +0100)]
ramips: mt7621: use preferred logic in lib/upgrade/iodata.sh
shellcheck recommends || and && over "-a" and "-o" because the
latter are not well defined.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
INAGAKI Hiroshi [Tue, 26 Jan 2021 14:50:51 +0000 (23:50 +0900)]
ramips: add support for I-O DATA WN-DX1200GR
I-O DATA WN-DX1200GR is a 2.4/5 GHz band 11ac (WiFi-5) router, based on
MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : raw NAND 128 MiB
- WLAN : 2.4/5 GHz 2T2R
- 2.4 GHz : MediaTek MT7603E
- 5 GHz : MediaTek MT7613BE
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- LEDs/keys : 2x/3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J5: 3.3V, TX, RX, NC, GND from triangle-mark
- 57600n8
- Power : 12 VDC, 1 A
Flash instruction using initramfs image:
1. Boot WN-DX1200GR normally
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt initramfs image and click update ("更新") button
to perform firmware update
4. On the initramfs image, perform sysupgrade with the
squashfs-sysupgrade image
5. Wait ~120 seconds to complete flashing
Notes:
- currently, mt7615e driver in mt76 doesn't fully support MT7613
(MT7663) wifi chip
- the eeprom data in flash is not used by mt7615e driver and the
driver reports the tx-power up to 3dBm
- the correct MAC address for MT7613BE in eeprom data cannot be
assigned to the phy
- last 0x80000 (512 KiB) in NAND flash is not used on stock firmware
- stock firmware requires "customized uImage header" (called as "combo
image") by MSTC (MitraStar Technology Corp.), but U-Boot doesn't
- uImage magic ( 0x0 - 0x3 ) : 0x434F4D43 ("COMC")
- header crc32 ( 0x4 - 0x7 ) : with "data length" and "data crc32"
- image name (0x20 - 0x37) : model ID and firmware versions
- data length (0x38 - 0x3b) : kernel + rootfs
- data crc32 (0x3c - 0x3f) : kernel + rootfs
MAC addresses:
LAN: 50:41:B9:xx:xx:08 (Ubootenv, ethaddr (text) / Factory, 0x1E000 (hex))
WAN: 50:41:B9:xx:xx:0A (Factory, 0x1E006 (hex))
2.4GHz: 50:41:B9:xx:xx:08 (Factory, 0x4 (hex))
5GHz: 50:41:B9:xx:xx:09 (Factory, 0x8004 (hex))
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[add check whether dflag_offset is set]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel González Cabanelas [Sun, 7 Feb 2021 16:37:47 +0000 (17:37 +0100)]
bcm63xx: kernel: reenable the TRNG
The hardware random number generator driver for bcm63xx was merged with
the one used by the Raspberry Pi. Now this driver is lost.
Reenable the HW_RANDOM kernel config with the new driver.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
[refresh kernel config]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Pawel Dembicki [Sun, 10 Jan 2021 20:12:44 +0000 (21:12 +0100)]
mpc85xx: refresh kernel config
Simple "make kernel_oldconfig" was done.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Paul Spooren [Sat, 30 Jan 2021 20:54:44 +0000 (10:54 -1000)]
treewide: unify OpenWrt hosted source via @OPENWRT
Multiple sources are hosted on OpenWrts source server only. The source
URLs to point to the server vary based on different epochs in OpenWrts
history.
Replace all by @OPENWRT which is an "empty" mirror, therefore using the
fallback servers sources.cdn.openwrt.org and sources.openwrt.org.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Thomas Beckler [Sat, 30 May 2020 21:40:03 +0000 (23:40 +0200)]
kirkwood: use 3 temperature sensors for Zyxel NSA310B
Instead of taking the input of one temperature sensor (temp1), the
script takes into account three temperature sensors to control the
PWM of the cooling fan.
temp1 -> placed on main board
temp2 -> placed on main board
temp3 -> placed on or close to chipset
All three temperatures give valid input for the PWM of the fan on
NSA310 and are actually changing.
Tested on two NSA310.
Signed-off-by: Thomas Beckler <thomas.beckler@hotmail.com>
Reviewed-by: Alberto Bursi <bobafetthotmail@gmail.com>
[commit title/message facelift, code cleanup]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Alexey Kunitskiy [Sun, 13 Dec 2020 16:48:58 +0000 (18:48 +0200)]
tplink-safeloader: add support for TP-Link Archer A7 v5 (RU)
Although provided in separate zip archives, the firmwares for EU
and RU version are byte-identical. This adds the missing ID compared
to the support-list in the vendor firmware.
Note (since I checked it anyway):
Partitions and support list are unchanged for all three existing
firmware versions:
*
20200721-rel40773
*
20201029-rel43238
*
20201120-rel50399
Signed-off-by: Alexey Kunitskiy <alexey.kv@gmail.com>
[rewrite commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 5 Feb 2021 19:53:26 +0000 (20:53 +0100)]
ath79: wrap ucidef_add_switch in 02_network
Wrap line to be consistent with all other definitions.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Yanase Yuki [Thu, 5 Nov 2020 10:59:06 +0000 (19:59 +0900)]
build: move elx-header into image-commands.mk
ELECOM WAB-I1750-PS will need this in ath79, so move it to common
Makefile.
Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
Sungbo Eo [Fri, 25 Dec 2020 11:16:41 +0000 (20:16 +0900)]
kirkwood: refresh kernel config
Refresh config with make kernel_oldconfig.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Aleksander Jan Bajkowski [Tue, 3 Nov 2020 20:29:21 +0000 (21:29 +0100)]
lantiq: change phy-mode to mii for FRITZ!Box 7412
FRITZ!Box 7412 loads the firmware for fast ethernet PHY and mii is
more accurate in this case.
Gmii is used by Gigabit ethernet PHYs.
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Reviewed-by: Mathias Kresin <dev@kresin.me>
[minor commit title/message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 5 Feb 2021 17:28:30 +0000 (18:28 +0100)]
ipq806x: replace full-text BSC license by SPDX identifier
This replaces a full-text BSD clause by the corresponding SPDX
identifier.
This should make it easier to identify the license both by humans
and machines.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 5 Feb 2021 17:18:00 +0000 (18:18 +0100)]
ramips: replace full-text licenses by SPDX identifier
This replaces several full-text and abbreviated licenses found in
DTS files by the corresponding SPDX identifiers.
This should make it easier to identify the license both by humans
and machines.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
David Bentham [Sat, 21 Nov 2020 14:04:49 +0000 (14:04 +0000)]
ramips: add support for UniElec U7621-01
UniElec U7621-01 is a router platform board, the smaller model of
the U7621-06.
The device has the following specifications:
- MT7621AT (880 MHz)
- 256 of RAM (DDR3)
- 16 MB of FLASH (SPI NOR)
- 5x 1 Gbps Ethernet (MT7621 built-in switch)
- 1x 2.4Ghz MT7603E
- 1x 5Ghz MT7612
- 1x miniPCIe slots (PCIe bus only)
- 1x miniSIM slot
- 1x USB 2.0 (uses the usb 3.0 driver)
- 8x LEDs (1x GPIO-controlled)
- 1x reset button
- 1x UART header (4-pins)
- 1x GPIO header (30-pins)
- 1x DC jack for main power (12 V)
The following has been tested and is working:
- Ethernet switch
- 1x 2.4Ghz MT7603E (wifi)
- 1x 5Ghz MT7612 (wifi)
- miniPCIe slots (tested with Wi-Fi cards and LTE modem cards)
- miniSIM slot (works with normal size simcard)
- sysupgrade
- reset button
Installation:
This board has no locked down bootloader. The seller can be asked to
install openwrt v18.06, so upgrades are standard sysupgrade method.
Recovery:
This board contains a Chinese, closed-source bootloader called Breed
(Boot and Recovery Environment for Embedded Devices). Breed supports web
recovery and to enter it, you keep the reset button pressed for around
5 seconds during boot. Your machine will be assigned an IP through DHCP
and the router will use IP address 192.168.1.1. The recovery website is
in Chinese, but is easy to use. Click on the second item in the list to
access the recovery page, then the second item on the next page is where
you select the firmware. In order to start the recovery, you click the
button at the bottom.
LEDs list (left to right):
- ESW_P0_LED_0
- ESW_P1_LED_0
- ESW_P2_LED_0
- ESW_P3_LED_0
- ESW_P4_LED_0
- CTS2_N (GPIO10, configured as "status" LED)
- LED_WLAN# (connected with pin 44 in wifi1 slot)
Signed-off-by: David Bentham <db260179@gmail.com>
[add DEVICE_VARIANT, fix DEVICE_PACKAGES, remove &gpio]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Martin Kennedy [Sat, 28 Nov 2020 02:03:32 +0000 (02:03 +0000)]
ath79: add support for Meraki MR12
Port device support for Meraki MR12 from the ar71xx target to ath79.
Specifications:
- SoC: AR7242-AH1A CPU
- RAM: 64MiB (NANYA NT5DS32M16DS-5T)
- NOR Flash: 16MiB (MXIC MX25L12845EMI-10G)
- Ethernet: 1 x PoE Gigabit Ethernet Port (SoC MAC + AR8021-BL1E PHY)
- Ethernet: 1 x 100Mbit port (SoC MAC+PHY)
- Wi-Fi: Atheros AR9283-AL1A (2T2R, 11n)
Installation:
1. Requires TFTP server at 192.168.1.101, w/ initramfs & sysupgrade .bins
2. Open shell case
3. Connect a USB->TTL cable to headers furthest from the RF shield
4. Power on the router; connect to U-boot over 115200-baud connection
5. Interrupt U-boot process to boot Openwrt by running:
setenv bootcmd bootm 0xbf0a0000; saveenv;
tftpboot
0c00000 <filename-of-initramfs-kernel>.bin;
bootm
0c00000;
6. Copy sysupgrade image to /tmp on MR12
7. sysupgrade /tmp/<filename-of-sysupgrade>.bin
Notes:
- kmod-owl-loader is still required to load the ART partition into the
driver.
- The manner of storing MAC addresses is updated from ar71xx; it is
at 0x66 of the 'config' partition, where it was discovered that the
OEM firmware stores it. This is set as read-only. If you are
migrating from ar71xx and used the method mentioned above to
upgrade, use kmod-mtd-rw or UCI to add the MAC back in. One more
method for doing this is described below.
- Migrating directly from ar71xx has not been thoroughly tested, but
one method has been used a couple of times with good success,
migrating 18.06.2 to a full image produced as of this commit. Please
note that these instructions are only for experienced users, and/or
those still able to open their device up to flash it via the serial
headers should anything go wrong.
1) Install kmod-mtd-rw and uboot-envtools
2) Run `insmod mtd-rw.ko i_want_a_brick=1`
3) Modify /etc/fw_env.config to point to the u-boot-env partition.
The file /etc/fw_env.config should contain:
# MTD device env offset env size sector size
/dev/mtd1 0x00000 0x10000 0x10000
See https://openwrt.org/docs/techref/bootloader/uboot.config
for more details.
4) Run `fw_printenv` to verify everything is correct, as per the
link above.
5) Run `fw_setenv bootcmd bootm 0xbf0a0000` to set a new boot address.
6) Manually modify /lib/upgrade/common.sh's get_image function:
Change ...
cat "$from" 2>/dev/null | $cmd
... into ...
(
dd if=/dev/zero bs=1 count=$((0x66)) ; # Pad the first 102 bytes
echo -ne '\x00\x18\x0a\x12\x34\x56' ; # Add in MAC address
dd if=/dev/zero bs=1 count=$((0x20000-0x66-0x6)) ; # Pad the rest
cat "$from" 2>/dev/null
) | $cmd
... which, during the upgrade process, will pad the image by
128K of zeroes-plus-MAC-address, in order for the ar71xx's
firmware partition -- which starts at 0xbf080000 -- to be
instead aligned with the ath79 firmware partition, which
starts 128K later at 0xbf0a0000.
7) Copy the sysupgrade image into /tmp, as above
8) Run `sysupgrade -F /tmp/<sysupgrade>.bin`, then wait
Again, this may BRICK YOUR DEVICE, so make *sure* to have your
serial cable handy.
Signed-off-by: Martin Kennedy <hurricos@gmail.com>
[add LED migration and extend compat message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
projects / openwrt / staging / dangole.git / log